From ef66a9d222718f080018d07f691faa1f01789e7d Mon Sep 17 00:00:00 2001 From: Stephen Neuendorffer Date: Wed, 6 Feb 2008 04:24:10 +1100 Subject: [PATCH] [POWERPC] Xilinx: hwicap: update booting-without-of.txt The ICAP device in Xilinx FPGAs differs slightly between different FPGAs. The driver needs an additional attribute in the device tree to distinguish this. Signed-off-by: Stephen Neuendorffer Signed-off-by: Grant Likely --- Documentation/powerpc/booting-without-of.txt | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index b5e46efeba84..2efea2d497f8 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -2577,6 +2577,20 @@ platforms are moved over to use the flattened-device-tree model. Requred properties: - current-speed : Baud rate of uartlite + v) Xilinx hwicap + + Xilinx hwicap devices provide access to the configuration logic + of the FPGA through the Internal Configuration Access Port + (ICAP). The ICAP enables partial reconfiguration of the FPGA, + readback of the configuration information, and some control over + 'warm boots' of the FPGA fabric. + + Required properties: + - xlnx,family : The family of the FPGA, necessary since the + capabilities of the underlying ICAP hardware + differ between different families. May be + 'virtex2p', 'virtex4', or 'virtex5'. + p) Freescale Synchronous Serial Interface The SSI is a serial device that communicates with audio codecs. It can -- 2.30.2