From ef34814426862c41c061520d4ac833be5914b5ba Mon Sep 17 00:00:00 2001 From: Karsten Keil Date: Fri, 12 May 2006 12:49:08 -0700 Subject: [PATCH] [TG3]: ethtool always report port is TP. Even with fiber cards ethtool reports that the connected port is TP, the patch fix this. Signed-off-by: Karsten Keil Acked-by: Michael Chan Signed-off-by: David S. Miller --- drivers/net/tg3.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 2bd9592b75cd..e1b33a25a25f 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -7653,21 +7653,23 @@ static int tg3_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) cmd->supported |= (SUPPORTED_1000baseT_Half | SUPPORTED_1000baseT_Full); - if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES)) + if (!(tp->tg3_flags2 & TG3_FLG2_ANY_SERDES)) { cmd->supported |= (SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full | SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full | SUPPORTED_MII); - else + cmd->port = PORT_TP; + } else { cmd->supported |= SUPPORTED_FIBRE; + cmd->port = PORT_FIBRE; + } cmd->advertising = tp->link_config.advertising; if (netif_running(dev)) { cmd->speed = tp->link_config.active_speed; cmd->duplex = tp->link_config.active_duplex; } - cmd->port = 0; cmd->phy_address = PHY_ADDR; cmd->transceiver = 0; cmd->autoneg = tp->link_config.autoneg; -- 2.30.2