From ee808154571229cd3b677ea6c1ab96b122475c10 Mon Sep 17 00:00:00 2001 From: Sungbo Eo Date: Thu, 12 Mar 2020 02:50:35 +0900 Subject: [PATCH] mvebu: use generic diag.sh This commit removes the target-specific diag.sh script. This way, the generic one is used for the target, which uses DT-aliases to specify the LEDs used. Signed-off-by: Sungbo Eo Tested-by: Ansuel Smith [wrt3200acm @ 5.4] --- target/linux/mvebu/base-files/etc/diag.sh | 48 ------------------ .../patches-4.19/240-linksys-status-led.patch | 50 +++++++++++++++++++ 2 files changed, 50 insertions(+), 48 deletions(-) delete mode 100644 target/linux/mvebu/base-files/etc/diag.sh create mode 100644 target/linux/mvebu/patches-4.19/240-linksys-status-led.patch diff --git a/target/linux/mvebu/base-files/etc/diag.sh b/target/linux/mvebu/base-files/etc/diag.sh deleted file mode 100644 index be825379f9..0000000000 --- a/target/linux/mvebu/base-files/etc/diag.sh +++ /dev/null @@ -1,48 +0,0 @@ -#!/bin/sh -# Copyright (C) 2014-2016 OpenWrt.org -# Copyright (C) 2016 LEDE-Project.org - -. /lib/functions.sh -. /lib/functions/leds.sh - -get_status_led() { - case $(board_name) in - linksys,caiman) - status_led="caiman:white:power" - ;; - linksys,cobra) - status_led="cobra:white:power" - ;; - linksys,mamba) - status_led="mamba:white:power" - ;; - linksys,rango) - status_led="rango:white:power" - ;; - linksys,shelby) - status_led="shelby:white:power" - ;; - linksys,venom) - status_led="venom:blue:power" - ;; - esac -} - -set_state() { - get_status_led - - case "$1" in - preinit) - status_led_blink_preinit - ;; - failsafe) - status_led_blink_failsafe - ;; - preinit_regular) - status_led_blink_preinit_regular - ;; - done) - status_led_on - ;; - esac -} diff --git a/target/linux/mvebu/patches-4.19/240-linksys-status-led.patch b/target/linux/mvebu/patches-4.19/240-linksys-status-led.patch new file mode 100644 index 0000000000..e5e83572c9 --- /dev/null +++ b/target/linux/mvebu/patches-4.19/240-linksys-status-led.patch @@ -0,0 +1,50 @@ +--- a/arch/arm/boot/dts/armada-385-linksys.dtsi ++++ b/arch/arm/boot/dts/armada-385-linksys.dtsi +@@ -14,6 +14,13 @@ + compatible = "linksys,armada385", "marvell,armada385", + "marvell,armada380"; + ++ aliases { ++ led-boot = &led_power; ++ led-failsafe = &led_power; ++ led-running = &led_power; ++ led-upgrade = &led_power; ++ }; ++ + chosen { + stdout-path = "serial0:115200n8"; + }; +@@ -71,7 +78,7 @@ + pinctrl-0 = <&gpio_leds_pins>; + pinctrl-names = "default"; + +- power { ++ led_power: power { + gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; +--- a/arch/arm/boot/dts/armada-xp-linksys-mamba.dts ++++ b/arch/arm/boot/dts/armada-xp-linksys-mamba.dts +@@ -26,6 +26,13 @@ + compatible = "linksys,mamba", "marvell,armadaxp-mv78230", + "marvell,armadaxp", "marvell,armada-370-xp"; + ++ aliases { ++ led-boot = &led_power; ++ led-failsafe = &led_power; ++ led-running = &led_power; ++ led-upgrade = &led_power; ++ }; ++ + chosen { + bootargs = "console=ttyS0,115200"; + stdout-path = &uart0; +@@ -197,7 +204,7 @@ + pinctrl-0 = <&power_led_pin>; + pinctrl-names = "default"; + +- power { ++ led_power: power { + label = "mamba:white:power"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + default-state = "on"; -- 2.30.2