From edd965229669f8f8dfddec8c863250440fb65ab3 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Tue, 26 Sep 2006 10:52:30 +0200 Subject: [PATCH] [PATCH] Remove MPS table APIC renumbering The MPS table specification says that the operating system should renumber the IO-APICs following the table as needed. However in ACPI this is not allowed or neeeded and all x86-64 systems are ACPI compliant. The code was already disabled on some systems because it caused problems there. Remove it completely now. CC: mdomsch@dell.com Signed-off-by: Andi Kleen --- arch/x86_64/kernel/io_apic.c | 71 ------------------------------------ 1 file changed, 71 deletions(-) diff --git a/arch/x86_64/kernel/io_apic.c b/arch/x86_64/kernel/io_apic.c index 1ccf1b41c3ed..a02ed17d05dc 100644 --- a/arch/x86_64/kernel/io_apic.c +++ b/arch/x86_64/kernel/io_apic.c @@ -1282,72 +1282,6 @@ void disable_IO_APIC(void) disconnect_bsp_APIC(ioapic_i8259.pin != -1); } -/* - * function to set the IO-APIC physical IDs based on the - * values stored in the MPC table. - * - * by Matt Domsch Tue Dec 21 12:25:05 CST 1999 - */ - -static void __init setup_ioapic_ids_from_mpc (void) -{ - union IO_APIC_reg_00 reg_00; - int apic; - int i; - unsigned char old_id; - unsigned long flags; - - /* - * Set the IOAPIC ID to the value stored in the MPC table. - */ - for (apic = 0; apic < nr_ioapics; apic++) { - - /* Read the register 0 value */ - spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(apic, 0); - spin_unlock_irqrestore(&ioapic_lock, flags); - - old_id = mp_ioapics[apic].mpc_apicid; - - - printk(KERN_INFO "Using IO-APIC %d\n", mp_ioapics[apic].mpc_apicid); - - - /* - * We need to adjust the IRQ routing table - * if the ID changed. - */ - if (old_id != mp_ioapics[apic].mpc_apicid) - for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mpc_dstapic == old_id) - mp_irqs[i].mpc_dstapic - = mp_ioapics[apic].mpc_apicid; - - /* - * Read the right value from the MPC table and - * write it into the ID register. - */ - apic_printk(APIC_VERBOSE,KERN_INFO "...changing IO-APIC physical APIC ID to %d ...", - mp_ioapics[apic].mpc_apicid); - - reg_00.bits.ID = mp_ioapics[apic].mpc_apicid; - spin_lock_irqsave(&ioapic_lock, flags); - io_apic_write(apic, 0, reg_00.raw); - spin_unlock_irqrestore(&ioapic_lock, flags); - - /* - * Sanity check - */ - spin_lock_irqsave(&ioapic_lock, flags); - reg_00.raw = io_apic_read(apic, 0); - spin_unlock_irqrestore(&ioapic_lock, flags); - if (reg_00.bits.ID != mp_ioapics[apic].mpc_apicid) - printk("could not set ID!\n"); - else - apic_printk(APIC_VERBOSE," ok.\n"); - } -} - /* * There is a nasty bug in some older SMP boards, their mptable lies * about the timer IRQ. We do the following to work around the situation: @@ -1863,11 +1797,6 @@ void __init setup_IO_APIC(void) apic_printk(APIC_VERBOSE, "ENABLING IO-APIC IRQs\n"); - /* - * Set up the IO-APIC IRQ routing table. - */ - if (!acpi_ioapic) - setup_ioapic_ids_from_mpc(); sync_Arb_IDs(); setup_IO_APIC_irqs(); init_IO_APIC_traps(); -- 2.30.2