From ed32350dc5ccc2b00685d857c3270688d465cd41 Mon Sep 17 00:00:00 2001 From: Madhusudhan Chikkature Date: Fri, 11 Dec 2009 16:16:37 -0800 Subject: [PATCH] omap3: Zoom2/3: Update hsmmc board config params Update the hsmmc zoom peripheral configuration to support: Power saving mode mmc2 8-bit support Configure mmc2 as non removable Signed-off-by: Madhusudhan Chikkature Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-zoom-peripherals.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 221a8e3dc9c5..258794db488f 100755 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -152,14 +152,20 @@ static struct regulator_init_data zoom_vsim = { static struct twl4030_hsmmc_info mmc[] __initdata = { { + .name = "external", .mmc = 1, .wires = 4, .gpio_wp = -EINVAL, + .power_saving = true, }, { + .name = "internal", .mmc = 2, - .wires = 4, + .wires = 8, + .gpio_cd = -EINVAL, .gpio_wp = -EINVAL, + .nonremovable = true, + .power_saving = true, }, {} /* Terminator */ }; @@ -167,11 +173,8 @@ static struct twl4030_hsmmc_info mmc[] __initdata = { static int zoom_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - /* gpio + 0 is "mmc0_cd" (input/IRQ), - * gpio + 1 is "mmc1_cd" (input/IRQ) - */ + /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; - mmc[1].gpio_cd = gpio + 1; twl4030_mmc_init(mmc); /* link regulators to MMC adapters ... we "know" the -- 2.30.2