From ec51e960bc355c5ebf7501f1e74723d5d4f4212d Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Sun, 14 Oct 2012 07:31:49 -0300 Subject: [PATCH] [media] omap3isp: Add PHY routing configuration Add PHY routing configuration for both 3430 and 3630. Also add register bit definitions of CSIRXFE and CAMERA_PHY_CTRL registers on OMAP 3430 and 3630, respectively. Signed-off-by: Sakari Ailus Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab --- drivers/media/platform/omap3isp/ispcsiphy.c | 88 +++++++++++++++++++++ drivers/media/platform/omap3isp/ispreg.h | 22 ++++++ 2 files changed, 110 insertions(+) diff --git a/drivers/media/platform/omap3isp/ispcsiphy.c b/drivers/media/platform/omap3isp/ispcsiphy.c index 348f67ebbbc9..8ac99b9dc053 100644 --- a/drivers/media/platform/omap3isp/ispcsiphy.c +++ b/drivers/media/platform/omap3isp/ispcsiphy.c @@ -32,6 +32,94 @@ #include "ispreg.h" #include "ispcsiphy.h" +static void csiphy_routing_cfg_3630(struct isp_csiphy *phy, u32 iface, + bool ccp2_strobe) +{ + u32 reg = isp_reg_readl( + phy->isp, OMAP3_ISP_IOMEM_3630_CONTROL_CAMERA_PHY_CTRL, 0); + u32 shift, mode; + + switch (iface) { + case ISP_INTERFACE_CCP2B_PHY1: + reg &= ~OMAP3630_CONTROL_CAMERA_PHY_CTRL_CSI1_RX_SEL_PHY2; + shift = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_PHY1_SHIFT; + break; + case ISP_INTERFACE_CSI2C_PHY1: + shift = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_PHY1_SHIFT; + mode = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_DPHY; + break; + case ISP_INTERFACE_CCP2B_PHY2: + reg |= OMAP3630_CONTROL_CAMERA_PHY_CTRL_CSI1_RX_SEL_PHY2; + shift = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_PHY2_SHIFT; + break; + case ISP_INTERFACE_CSI2A_PHY2: + shift = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_PHY2_SHIFT; + mode = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_DPHY; + break; + } + + /* Select data/clock or data/strobe mode for CCP2 */ + switch (iface) { + case ISP_INTERFACE_CCP2B_PHY1: + case ISP_INTERFACE_CCP2B_PHY2: + if (ccp2_strobe) + mode = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_CCP2_DATA_STROBE; + else + mode = OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_CCP2_DATA_CLOCK; + } + + reg &= ~(OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_MASK << shift); + reg |= mode << shift; + + isp_reg_writel(phy->isp, reg, + OMAP3_ISP_IOMEM_3630_CONTROL_CAMERA_PHY_CTRL, 0); +} + +static void csiphy_routing_cfg_3430(struct isp_csiphy *phy, u32 iface, bool on, + bool ccp2_strobe) +{ + u32 csirxfe = OMAP343X_CONTROL_CSIRXFE_PWRDNZ + | OMAP343X_CONTROL_CSIRXFE_RESET; + + /* Only the CCP2B on PHY1 is configurable. */ + if (iface != ISP_INTERFACE_CCP2B_PHY1) + return; + + if (!on) { + isp_reg_writel(phy->isp, 0, + OMAP3_ISP_IOMEM_343X_CONTROL_CSIRXFE, 0); + return; + } + + if (ccp2_strobe) + csirxfe |= OMAP343X_CONTROL_CSIRXFE_SELFORM; + + isp_reg_writel(phy->isp, csirxfe, + OMAP3_ISP_IOMEM_343X_CONTROL_CSIRXFE, 0); +} + +/* + * Configure OMAP 3 CSI PHY routing. + * @phy: relevant phy device + * @iface: ISP_INTERFACE_* + * @on: power on or off + * @ccp2_strobe: false: data/clock, true: data/strobe + * + * Note that the underlying routing configuration registers are part of the + * control (SCM) register space and part of the CORE power domain on both 3430 + * and 3630, so they will not hold their contents in off-mode. This isn't an + * issue since the MPU power domain is forced on whilst the ISP is in use. + */ +static void csiphy_routing_cfg(struct isp_csiphy *phy, u32 iface, bool on, + bool ccp2_strobe) +{ + if (phy->isp->mmio_base[OMAP3_ISP_IOMEM_3630_CONTROL_CAMERA_PHY_CTRL] + && on) + return csiphy_routing_cfg_3630(phy, iface, ccp2_strobe); + if (phy->isp->mmio_base[OMAP3_ISP_IOMEM_343X_CONTROL_CSIRXFE]) + return csiphy_routing_cfg_3430(phy, iface, on, ccp2_strobe); +} + /* * csiphy_lanes_config - Configuration of CSIPHY lanes. * diff --git a/drivers/media/platform/omap3isp/ispreg.h b/drivers/media/platform/omap3isp/ispreg.h index fd13d8bb63e2..b7d90e6fb01d 100644 --- a/drivers/media/platform/omap3isp/ispreg.h +++ b/drivers/media/platform/omap3isp/ispreg.h @@ -1506,4 +1506,26 @@ #define ISPCSIPHY_REG2_CCP2_SYNC_PATTERN_MASK \ (0x7fffff << ISPCSIPHY_REG2_CCP2_SYNC_PATTERN_SHIFT) +/* ----------------------------------------------------------------------------- + * CONTROL registers for CSI-2 phy routing + */ + +/* OMAP343X_CONTROL_CSIRXFE */ +#define OMAP343X_CONTROL_CSIRXFE_CSIB_INV (1 << 7) +#define OMAP343X_CONTROL_CSIRXFE_RESENABLE (1 << 8) +#define OMAP343X_CONTROL_CSIRXFE_SELFORM (1 << 10) +#define OMAP343X_CONTROL_CSIRXFE_PWRDNZ (1 << 12) +#define OMAP343X_CONTROL_CSIRXFE_RESET (1 << 13) + +/* OMAP3630_CONTROL_CAMERA_PHY_CTRL */ +#define OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_PHY1_SHIFT 2 +#define OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_PHY2_SHIFT 0 +#define OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_DPHY 0x0 +#define OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_CCP2_DATA_STROBE 0x1 +#define OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_CCP2_DATA_CLOCK 0x2 +#define OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_GPI 0x3 +#define OMAP3630_CONTROL_CAMERA_PHY_CTRL_CAMMODE_MASK 0x3 +/* CCP2B: set to receive data from PHY2 instead of PHY1 */ +#define OMAP3630_CONTROL_CAMERA_PHY_CTRL_CSI1_RX_SEL_PHY2 (1 << 4) + #endif /* OMAP3_ISP_REG_H */ -- 2.30.2