From ebd5f82d32ade6f864917bf868bfa32f4d3c0486 Mon Sep 17 00:00:00 2001 From: Joel Stanley Date: Wed, 10 Jul 2019 23:40:09 +0930 Subject: [PATCH] clk: aspeed: Add SDIO gate The clock divisor comes with an enable bit (gate). This was not implemented as we didn't have access to SD hardware when writing the driver. Now that we can test it, add the gate as a parent to the divisor. There is no reason to expose the gate separately, so users will enable it by turning on the ASPEED_CLK_SDIO divisor. Signed-off-by: Joel Stanley [aj: Minor style cleanup] Signed-off-by: Andrew Jeffery Link: https://lkml.kernel.org/r/20190710141009.20651-1-andrew@aj.id.au Signed-off-by: Stephen Boyd --- drivers/clk/clk-aspeed.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/clk/clk-aspeed.c b/drivers/clk/clk-aspeed.c index 42b4df6ba249..898291501f45 100644 --- a/drivers/clk/clk-aspeed.c +++ b/drivers/clk/clk-aspeed.c @@ -500,9 +500,14 @@ static int aspeed_clk_probe(struct platform_device *pdev) return PTR_ERR(hw); aspeed_clk_data->hws[ASPEED_CLK_MPLL] = hw; - /* SD/SDIO clock divider (TODO: There's a gate too) */ - hw = clk_hw_register_divider_table(dev, "sdio", "hpll", 0, - scu_base + ASPEED_CLK_SELECTION, 12, 3, 0, + /* SD/SDIO clock divider and gate */ + hw = clk_hw_register_gate(dev, "sd_extclk_gate", "hpll", 0, + scu_base + ASPEED_CLK_SELECTION, 15, 0, + &aspeed_clk_lock); + if (IS_ERR(hw)) + return PTR_ERR(hw); + hw = clk_hw_register_divider_table(dev, "sd_extclk", "sd_extclk_gate", + 0, scu_base + ASPEED_CLK_SELECTION, 12, 3, 0, soc_data->div_table, &aspeed_clk_lock); if (IS_ERR(hw)) -- 2.30.2