From eb38af788180d624e5b37aa5db1fe3766b138dc8 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Thibaut=20VAR=C3=88NE?= Date: Mon, 28 Feb 2022 11:34:43 +0100 Subject: [PATCH] ath79: add support for MikroTik RouterBOARD mAP lite MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit The MikroTik RouterBOARD mAPL-2nd (sold as mAP Lite) is a small 2.4 GHz 802.11b/g/n PoE-capable AP. See https://mikrotik.com/product/RBmAPL-2nD for more info. Specifications: - SoC: Qualcomm Atheros QCA9533 - RAM: 64 MB - Storage: 16 MB NOR - Wireless: Atheros AR9531 (SoC) 802.11b/g/n 2x2:2, 1.5 dBi antenna - Ethernet: Atheros AR8229 (SoC), 1x 10/100 port, 802.3af/at PoE in - 4 user-controllable LEDs: · 1x power (green) · 1x user (green) · 1x lan (green) · 1x wlan (green) Flashing: TFTP boot initramfs image and then perform sysupgrade. Follow common MikroTik procedure as in https://openwrt.org/toh/mikrotik/common. Note: following 781d4bfb397cdd12ee0151eb66c577f470e3377d The network setup avoids using the integrated switch and connects the single Ethernet port directly. This way, link speed (10/100 Mbps) is properly reported by eth0. Signed-off-by: Thibaut VARÈNE --- .../qca9533_mikrotik_routerboard-mapl-2nd.dts | 68 +++++++++++++++++++ target/linux/ath79/image/mikrotik.mk | 8 +++ .../mikrotik/base-files/etc/board.d/01_leds | 3 +- .../base-files/etc/board.d/02_network | 2 + .../etc/hotplug.d/firmware/10-ath9k-eeprom | 1 + 5 files changed, 81 insertions(+), 1 deletion(-) create mode 100644 target/linux/ath79/dts/qca9533_mikrotik_routerboard-mapl-2nd.dts diff --git a/target/linux/ath79/dts/qca9533_mikrotik_routerboard-mapl-2nd.dts b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-mapl-2nd.dts new file mode 100644 index 0000000000..e2442f0095 --- /dev/null +++ b/target/linux/ath79/dts/qca9533_mikrotik_routerboard-mapl-2nd.dts @@ -0,0 +1,68 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca9533_mikrotik_routerboard-16m.dtsi" + +/ { + compatible = "mikrotik,routerboard-mapl-2nd", "qca,qca9533"; + model = "MikroTik RouterBOARD mAPL-2nD (mAP lite)"; + + aliases { + led-boot = &led_user; + led-failsafe = &led_user; + led-running = &led_user; + led-upgrade = &led_user; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_power_pin &led_lan_pin>; + + power { + label = "green:power"; + gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + lan { + label = "green:lan"; + gpios = <&gpio 4 GPIO_ACTIVE_HIGH>; + }; + + wlan { + label = "green:wlan"; + gpios = <&gpio 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "phy0tpt"; + }; + + led_user: user { + label = "green:user"; + gpios = <&gpio 14 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +ð0 { + status = "okay"; + + phy-handle = <&swphy0>; + + gmac-config { + device = <&gmac>; + switch-phy-swap = <1>; + }; +}; + +ð1 { + compatible = "syscon", "simple-mfd"; +}; + +&pinmux { + led_lan_pin: pinmux_led_lan_pin { + pinctrl-single,bits = <0x4 0x0 0xff>; + }; + + led_power_pin: pinmux_led_power_pin { + pinctrl-single,bits = <0x10 0x0 0xff00>; + }; +}; diff --git a/target/linux/ath79/image/mikrotik.mk b/target/linux/ath79/image/mikrotik.mk index ff3604f2fa..dccb05e45a 100644 --- a/target/linux/ath79/image/mikrotik.mk +++ b/target/linux/ath79/image/mikrotik.mk @@ -55,6 +55,14 @@ define Device/mikrotik_routerboard-lhg-5nd endef TARGET_DEVICES += mikrotik_routerboard-lhg-5nd +define Device/mikrotik_routerboard-mapl-2nd + $(Device/mikrotik_nor) + SOC := qca9533 + DEVICE_MODEL := RouterBOARD mAPL-2nD (mAP lite) + IMAGE_SIZE := 16256k +endef +TARGET_DEVICES += mikrotik_routerboard-mapl-2nd + define Device/mikrotik_routerboard-sxt-5nd-r2 $(Device/mikrotik_nand) SOC := ar9344 diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds index 25c0184568..ecc47e07c2 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/01_leds @@ -6,7 +6,8 @@ board_config_update board=$(board_name) case "$board" in -mikrotik,routerboard-lhg-2nd) +mikrotik,routerboard-lhg-2nd|\ +mikrotik,routerboard-mapl-2nd) ucidef_set_led_netdev "lan" "lan" "green:lan" "eth0" ;; mikrotik,routerboard-lhg-5nd) diff --git a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network index 1a205e439c..cc4121f93e 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network +++ b/target/linux/ath79/mikrotik/base-files/etc/board.d/02_network @@ -17,6 +17,7 @@ ath79_setup_interfaces() mikrotik,routerboard-912uag-2hpnd|\ mikrotik,routerboard-lhg-2nd|\ mikrotik,routerboard-lhg-5nd|\ + mikrotik,routerboard-mapl-2nd|\ mikrotik,routerboard-sxt-5nd-r2|\ mikrotik,routerboard-wap-g-5hact2hnd|\ mikrotik,routerboard-wapr-2nd) @@ -40,6 +41,7 @@ ath79_setup_macs() mikrotik,routerboard-912uag-2hpnd|\ mikrotik,routerboard-lhg-2nd|\ mikrotik,routerboard-lhg-5nd|\ + mikrotik,routerboard-mapl-2nd|\ mikrotik,routerboard-sxt-5nd-r2|\ mikrotik,routerboard-wap-g-5hact2hnd|\ mikrotik,routerboard-wapr-2nd) diff --git a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom index abdabfb7c8..8b1b5f04dd 100644 --- a/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom +++ b/target/linux/ath79/mikrotik/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom @@ -30,6 +30,7 @@ case "$FIRMWARE" in mikrotik,routerboard-wapr-2nd) caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 1) ;; + mikrotik,routerboard-mapl-2nd|\ mikrotik,routerboard-wap-g-5hact2hnd) caldata_mikrotik_ath9k 0x1000 0x440 $(macaddr_add "$mac_base" 2) ;; -- 2.30.2