From eab9de0c9c05e1a057e4c9112c4802c7f8fe9a3d Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Thu, 18 May 2023 22:51:08 +0200 Subject: [PATCH] ipq40xx: convert EZVIZ CS-W3-WD1200G-EUP to DSA Convert the repeater to DSA. Signed-off-by: Christian Lamparter --- .../ipq40xx/base-files/etc/board.d/02_network | 1 + .../dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts | 36 +++++++++++++++++++ target/linux/ipq40xx/image/generic.mk | 3 +- 3 files changed, 38 insertions(+), 2 deletions(-) diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network index cb318d36a3..28648c0db9 100644 --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network @@ -82,6 +82,7 @@ ipq40xx_setup_interfaces() ucidef_set_interface_lan "sw-eth1 sw-eth2" ;; aruba,ap-303h|\ + ezviz,cs-w3-wd1200g-eup|\ netgear,rbr50|\ netgear,rbs50|\ netgear,srr60|\ diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts index dea5c2dc36..22a48c12c4 100644 --- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts +++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-cs-w3-wd1200g-eup.dts @@ -239,6 +239,42 @@ status = "okay"; }; +&gmac { + status = "okay"; + nvmem-cells = <&macaddr_art_0>; + nvmem-cell-names = "mac-address"; +}; + +&switch { + status = "okay"; +}; + +&swport2 { + status = "okay"; + label = "lan3"; +}; + +&swport3 { + status = "okay"; + label = "lan2"; +}; + +&swport4 { + status = "okay"; + label = "lan1"; +}; + +&swport5 { + status = "okay"; + label = "wan"; + nvmem-cells = <&macaddr_art_6>; + nvmem-cell-names = "mac-address"; +}; + +ðphy0 { + status = "disabled"; +}; + &wifi0 { status = "okay"; qcom,ath10k-calibration-variant = "ezviz-cs-w3-wd1200g-eup"; diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk index c8b8ec936b..59bdd04296 100644 --- a/target/linux/ipq40xx/image/generic.mk +++ b/target/linux/ipq40xx/image/generic.mk @@ -555,8 +555,7 @@ define Device/ezviz_cs-w3-wd1200g-eup DEVICE_COMPAT_MESSAGE := uboot's bootcmd has to be updated (see wiki). \ Upgrade via sysupgrade mechanism is not possible. endef -# Missing DSA Setup -#TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup +TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup define Device/glinet_gl-a1300 $(call Device/FitImage) -- 2.30.2