From e87bb77966fcc38b07761c3f627e40cd906faffa Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 12 Jan 2012 10:15:11 +0000 Subject: [PATCH] ar8216: use vlan configuration for connecting ports (forced to be untagged) even with vlan_enable=0, but keep them isolated before the switch has been configured this makes enable_vlan=0 practical for vlan passthrough SVN-Revision: 29719 --- target/linux/generic/files/drivers/net/phy/ar8216.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/target/linux/generic/files/drivers/net/phy/ar8216.c b/target/linux/generic/files/drivers/net/phy/ar8216.c index 57088a97484..3019aced872 100644 --- a/target/linux/generic/files/drivers/net/phy/ar8216.c +++ b/target/linux/generic/files/drivers/net/phy/ar8216.c @@ -48,6 +48,8 @@ struct ar8216_priv { bool port4_phy; char buf[80]; + bool init; + /* all fields below are cleared on reset */ bool vlan; u16 vlan_id[AR8X16_MAX_VLANS]; @@ -550,7 +552,7 @@ ar8216_hw_apply(struct switch_dev *dev) ar8216_vtu_op(priv, AR8216_VTU_OP_FLUSH, 0); memset(portmask, 0, sizeof(portmask)); - if (priv->vlan) { + if (!priv->init) { /* calculate the port destination masks and load vlans * into the vlan translation unit */ for (j = 0; j < AR8X16_MAX_VLANS; j++) { @@ -877,6 +879,8 @@ ar8216_config_init(struct phy_device *pdev) goto done; } + priv->init = true; + if (priv->chip == AR8316) { ret = ar8316_hw_init(priv); if (ret) { @@ -912,6 +916,8 @@ ar8216_config_init(struct phy_device *pdev) dev->netdev_ops = &priv->ndo; } + priv->init = false; + done: return ret; } -- 2.30.2