From e6244deed843bc001697f37e5beb1c0daf4f46a4 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Wed, 10 Feb 2016 15:02:45 -0800 Subject: [PATCH] i2c: omap: Fix PM regression with deferred probe for pm_runtime_reinit Commit 5de85b9d57ab ("PM / runtime: Re-init runtime PM states at probe error and driver unbind") introduced pm_runtime_reinit() that is used to reinitialize PM runtime after -EPROBE_DEFER. This allows shutting down the device after a failed probe. However, for drivers using pm_runtime_use_autosuspend() this can cause a state where suspend callback is never called after -EPROBE_DEFER. On the following device driver probe, hardware state is different from the PM runtime state causing omap_device to produce the following error: omap_device_enable() called from invalid state 1 And with omap_device and omap hardware being picky for PM, this will block any deeper idle states in hardware. The solution is to fix the drivers to follow the PM runtime documentation: 1. For sections of code that needs the device disabled, use pm_runtime_put_sync_suspend() if pm_runtime_set_autosuspend() has been set. 2. For driver exit code, use pm_runtime_dont_use_autosuspend() before pm_runtime_put_sync() if pm_runtime_use_autosuspend() has been set. Fixes: 5de85b9d57ab ("PM / runtime: Re-init runtime PM states at probe error and driver unbind") Signed-off-by: Tony Lindgren Acked-by: Ulf Hansson Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-omap.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 08d26ba61ed3..13c45296ce5b 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1450,7 +1450,8 @@ omap_i2c_probe(struct platform_device *pdev) err_unuse_clocks: omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0); - pm_runtime_put(omap->dev); + pm_runtime_dont_use_autosuspend(omap->dev); + pm_runtime_put_sync(omap->dev); pm_runtime_disable(&pdev->dev); err_free_mem: @@ -1468,6 +1469,7 @@ static int omap_i2c_remove(struct platform_device *pdev) return ret; omap_i2c_write_reg(omap, OMAP_I2C_CON_REG, 0); + pm_runtime_dont_use_autosuspend(&pdev->dev); pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); return 0; -- 2.30.2