From e5d821a4ff5bdaba2281b213582e3da7edfb1d3f Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 19 Apr 2012 21:18:27 +0200 Subject: [PATCH] ath9k_hw: disable Tx IQ calibration on half/quarter channels It does not work properly and reduces throughput. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- drivers/net/wireless/ath/ath9k/ar9003_calib.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 63089cc1fafd..a0387a027db0 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -1000,10 +1000,12 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah, if (mci && IS_CHAN_2GHZ(chan) && run_agc_cal) ar9003_mci_init_cal_req(ah, &is_reusable); - txiqcal_done = ar9003_hw_tx_iq_cal_run(ah); - REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS); - udelay(5); - REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); + if (!(IS_CHAN_HALF_RATE(chan) || IS_CHAN_QUARTER_RATE(chan))) { + txiqcal_done = ar9003_hw_tx_iq_cal_run(ah); + REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS); + udelay(5); + REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); + } skip_tx_iqcal: if (run_agc_cal || !(ah->ah_flags & AH_FASTCC)) { -- 2.30.2