From e55ca7e2624988f82d6f77ddab54246621260c8b Mon Sep 17 00:00:00 2001 From: wdenk Date: Thu, 1 Jul 2004 21:40:08 +0000 Subject: [PATCH] Patch by Andrea Marson, 11 Jun 2004: Update for PPChameleon board: - support for SysClk @ 25MHz - support for Silicon Motion SM712 VGA controller - some clean ups --- CHANGELOG | 6 + CREDITS | 10 ++ MAINTAINERS | 8 ++ Makefile | 20 ++- board/dave/PPChameleonEVB/PPChameleonEVB.c | 72 +++++++--- board/dave/PPChameleonEVB/flash.c | 9 ++ board/dave/common/flash.c | 2 + cpu/ppc4xx/speed.c | 9 +- include/configs/PPChameleonEVB.h | 149 +++++++++++++++------ 9 files changed, 215 insertions(+), 70 deletions(-) diff --git a/CHANGELOG b/CHANGELOG index efd8663a3e..13e223ea82 100644 --- a/CHANGELOG +++ b/CHANGELOG @@ -2,6 +2,12 @@ Changes since U-Boot 1.1.1: ====================================================================== +* Patch by Andrea Marson, 11 Jun 2004: + Update for PPChameleon board: + - support for SysClk @ 25MHz + - support for Silicon Motion SM712 VGA controller + - some clean ups + * Patches by Richard Woodruff, 10 Jun 2004: - fix problems with examples/stubs.c for GCC >= 3.4 - fix problems with gd initialization diff --git a/CREDITS b/CREDITS index 1c697faaa7..9b1f6a0d75 100644 --- a/CREDITS +++ b/CREDITS @@ -254,6 +254,11 @@ N: Dan Malek E: dan@netx4.com D: FADSROM, the grandfather of all of this +N: Andrea "llandre" Marson +E: andrea.marson@dave-tech.it +D: Port to PPChameleonEVB board +W: www.dave-tech.it + N: Reinhard Meyer E: r.meyer@emk-elektronik.de D: Port to EMK TOP860 Module @@ -338,6 +343,11 @@ N: Kurt Stremerch E: kurt@exys.be D: Support for Exys XSEngine board +N: Andrea Scian +E: andrea.scian@dave-tech.it +D: Port to B2 board +W: www.dave-tech.it + N: Rob Taylor E: robt@flyingpig.com D: Port to MBX860T and Sandpoint8240 diff --git a/MAINTAINERS b/MAINTAINERS index e6085bf277..5b7d5ea6ff 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -185,6 +185,10 @@ Eran Man EVB64260_750CX MPC750CX +Andrea "llandre" Marson + + PPChameleonEVB PPC405EP + Reinhard Meyer TOP860 MPC860T @@ -373,6 +377,10 @@ Robert Schwebel csb226 xscale innokom xscale +Andrea Scian + + B2 ARM7TDMI (S3C44B0X) + Alex Züpke lart SA1100 diff --git a/Makefile b/Makefile index 26a6df4739..ab1a3cced6 100644 --- a/Makefile +++ b/Makefile @@ -606,7 +606,7 @@ wtk_config: unconfig ######################################################################### ## PPC4xx Systems ######################################################################### -xtract_4xx = $(subst _MODEL_BA,,$(subst _MODEL_ME,,$(subst _MODEL_HI,,$(subst _config,,$1)))) +xtract_4xx = $(subst _25,,$(subst _33,,$(subst _BA,,$(subst _ME,,$(subst _HI,,$(subst _config,,$1)))))) ADCIOP_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx adciop esd @@ -706,10 +706,12 @@ PLU405_config: unconfig PMC405_config: unconfig @./mkconfig $(@:_config=) ppc ppc4xx pmc405 esd -PPChameleonEVB_MODEL_BA_config \ -PPChameleonEVB_MODEL_ME_config \ -PPChameleonEVB_MODEL_HI_config \ -PPChameleonEVB_config: unconfig +PPChameleonEVB_BA_25_config \ +PPChameleonEVB_ME_25_config \ +PPChameleonEVB_HI_25_config \ +PPChameleonEVB_BA_33_config \ +PPChameleonEVB_ME_33_config \ +PPChameleonEVB_HI_33_config: unconfig @ >include/config.h @[ -z "$(findstring _MODEL_BA,$@)" ] || \ { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>include/config.h ; \ @@ -723,6 +725,14 @@ PPChameleonEVB_config: unconfig { echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>include/config.h ; \ echo "... HIGH-END model" ; \ } + @[ -z "$(findstring _25,$@)" ] || \ + { echo "#define CONFIG_PPCHAMELEON_CLK_25" >>include/config.h ; \ + echo " SysClk = 25MHz" ; \ + } + @[ -z "$(findstring _33,$@)" ] || \ + { echo "#define CONFIG_PPCHAMELEON_CLK_33" >>include/config.h ; \ + echo " SysClk = 33MHz" ; \ + } @./mkconfig -a $(call xtract_4xx,$@) ppc ppc4xx PPChameleonEVB dave VOH405_config: unconfig diff --git a/board/dave/PPChameleonEVB/PPChameleonEVB.c b/board/dave/PPChameleonEVB/PPChameleonEVB.c index b08b119600..2b12f979a4 100644 --- a/board/dave/PPChameleonEVB/PPChameleonEVB.c +++ b/board/dave/PPChameleonEVB/PPChameleonEVB.c @@ -29,22 +29,9 @@ #include #include -/* ------------------------------------------------------------------------- */ -#if 0 -#define FPGA_DEBUG -#endif - -/* fpga configuration data - gzip compressed and generated by bin2c */ -const unsigned char fpgadata[] = -{ -#include "fpgadata.c" -}; +/* ------------------------------------------------------------------------- */ -/* - * include common fpga code (for esd boards) - */ -#include "../common/fpga.c" /* Prototypes */ @@ -60,13 +47,13 @@ int board_early_init_f (void) * IRQ 0-15 405GP internally generated; active high; level sensitive * IRQ 16 405GP internally generated; active low; level sensitive * IRQ 17-24 RESERVED - * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive - * IRQ 26 (EXT IRQ 1) SER0 ; active low; level sensitive - * IRQ 27 (EXT IRQ 2) SER1; active low; level sensitive - * IRQ 28 (EXT IRQ 3) FPGA 0; active low; level sensitive - * IRQ 29 (EXT IRQ 4) FPGA 1; active low; level sensitive - * IRQ 30 (EXT IRQ 5) PCI INTA; active low; level sensitive - * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive + * IRQ 25 (EXT IRQ 0) + * IRQ 26 (EXT IRQ 1) + * IRQ 27 (EXT IRQ 2) + * IRQ 28 (EXT IRQ 3) + * IRQ 29 (EXT IRQ 4) + * IRQ 30 (EXT IRQ 5) + * IRQ 31 (EXT IRQ 6) */ mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ mtdcr(uicer, 0x00000000); /* disable all ints */ @@ -268,8 +255,13 @@ nand_init(void) { ulong totlen = 0; -#if (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_ME) || \ +/* + The HI model is equipped with a large block NAND chip not supported yet + by U-Boot (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_HI) +*/ + +#if (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_ME) debug ("Probing at 0x%.8x\n", CFG_NAND0_BASE); totlen += nand_probe (CFG_NAND0_BASE); #endif /* CONFIG_PPCHAMELEON_MODULE_ME, CONFIG_PPCHAMELEON_MODULE_HI */ @@ -280,3 +272,39 @@ nand_init(void) printf ("%4lu MB\n", totlen >>20); } #endif + +#ifdef CONFIG_CFB_CONSOLE +# ifdef CONFIG_CONSOLE_EXTRA_INFO +# include +extern GraphicDevice smi; + +void video_get_info_str (int line_number, char *info) +{ + uint pvr = get_pvr (); + + /* init video info strings for graphic console */ + switch (line_number) { + case 1: + switch (pvr) { + case PVR_405EP_RB: + sprintf (info, " IBM PowerPC 405EP Rev. B"); + break; + default: + sprintf (info, " IBM PowerPC 405EP Rev. "); + break; + } + return; + case 2: + sprintf (info, " DAVE Srl PPChameleonEVB - www.dave-tech.it"); + return; + case 3: + sprintf (info, " %s", smi.modeIdent); + return; + } + + /* no more info lines */ + *info = 0; + return; +} +# endif /* CONFIG_CONSOLE_EXTRA_INFO */ +#endif /* CONFIG_CFB_CONSOLE */ diff --git a/board/dave/PPChameleonEVB/flash.c b/board/dave/PPChameleonEVB/flash.c index 5f67360a45..692d275a59 100644 --- a/board/dave/PPChameleonEVB/flash.c +++ b/board/dave/PPChameleonEVB/flash.c @@ -50,6 +50,9 @@ unsigned long flash_init (void) unsigned long base; int size_val = 0; + debug("[%s, %d] Entering ...\n", __FUNCTION__, __LINE__); + debug("[%s, %d] flash_info = 0x%08X ...\n", __FUNCTION__, __LINE__, flash_info); + /* Init: no FLASHes known */ for (i=0; i> 20) + 1; if (pllmr1 & PLLMR1_SSCS_MASK) { - sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) - / pllmr0_ccdv; + /* + * This is true if FWDVA == FWDVB: + * sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv) + * / pllmr0_ccdv; + */ + sysInfo->freqProcessor = (CONFIG_SYS_CLK_FREQ * sysInfo->pllFbkDiv * sysInfo->pllFwdDivB) + / sysInfo->pllFwdDiv / pllmr0_ccdv; } else { sysInfo->freqProcessor = CONFIG_SYS_CLK_FREQ / pllmr0_ccdv; } diff --git a/include/configs/PPChameleonEVB.h b/include/configs/PPChameleonEVB.h index 0c9b6dd7e4..bb8ce43bab 100644 --- a/include/configs/PPChameleonEVB.h +++ b/include/configs/PPChameleonEVB.h @@ -38,6 +38,18 @@ #define CONFIG_PPCHAMELEON_MODULE_MODEL CONFIG_PPCHAMELEON_MODULE_BA #endif + +/* Only one of the following two symbols must be defined (default is 25 MHz) + * CONFIG_PPCHAMELEON_CLK_25 + * CONFIG_PPCHAMELEON_CLK_33 + */ + +#if (defined(CONFIG_PPCHAMELEON_CLK_25) && defined(CONFIG_PPCHAMELEON_CLK_33)) +#error "* Two external frequencies (SysClk) are defined! *" +#endif + +#undef CONFIG_PPCHAMELEON_SMI712 + /* * Debug stuff */ @@ -60,7 +72,14 @@ #define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */ #define CONFIG_MISC_INIT_R 1 /* call misc_init_r() */ + +#ifdef CONFIG_PPCHAMELEON_CLK_25 + #define CONFIG_SYS_CLK_FREQ 25000000 /* external frequency to pll */ +#elif (defined (CONFIG_PPCHAMELEON_CLK_33)) #define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */ +#else +#error "* External frequency (SysClk) not defined! *" +#endif #define CONFIG_BAUDRATE 115200 #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ @@ -75,7 +94,6 @@ #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - #undef CONFIG_EXT_PHY #define CONFIG_NET_MULTI 1 @@ -184,7 +202,6 @@ #define CFG_NAND1_ALE (0x80000000 >> 16) /* our ALE is GPIO16 */ #define CFG_NAND1_RDY (0x80000000 >> 31) /* our RDY is GPIO31 */ - #define NAND_DISABLE_CE(nand) do \ { \ switch((unsigned long)(((struct nand_chip *)nand)->IO_ADDR)) \ @@ -211,7 +228,6 @@ } \ } while(0) - #define NAND_CTL_CLRALE(nandptr) do \ { \ switch((unsigned long)nandptr) \ @@ -292,9 +308,10 @@ #define CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */ -#define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */ -#define CFG_PCI_SUBSYS_DEVICEID 0x0405 /* PCI Device ID: CPCI-405 */ +#define CFG_PCI_SUBSYS_VENDORID 0x1014 /* PCI Vendor ID: IBM */ +#define CFG_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: --- */ #define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/ + #define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */ #define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */ #define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */ @@ -349,12 +366,23 @@ /*----------------------------------------------------------------------- * Environment Variable setup */ +#ifdef ENVIRONMENT_IN_EEPROM + +#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ +#define CFG_ENV_OFFSET 0x100 /* environment starts at the beginning of the EEPROM */ +#define CFG_ENV_SIZE 0x700 /* 2048-256 bytes may be used for env vars (total size of a CAT24WC16 is 2048 bytes)*/ + +#else /* DEFAULT: environment in flash, using redundand flash sectors */ + #define CFG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */ #define CFG_ENV_ADDR 0xFFFF8000 /* environment starts at the first small sector */ #define CFG_ENV_SECT_SIZE 0x2000 /* 8196 bytes may be used for env vars*/ #define CFG_ENV_ADDR_REDUND 0xFFFFA000 #define CFG_ENV_SIZE_REDUND 0x2000 +#endif /* ENVIRONMENT_IN_EEPROM */ + + #define CFG_NVRAM_BASE_ADDR 0xF0000500 /* NVRAM base address */ #define CFG_NVRAM_SIZE 242 /* NVRAM size */ @@ -414,23 +442,21 @@ #define CFG_EBC_PB3AP 0x92015480 #define CFG_EBC_PB3CR 0xFF058000 /* BAS=0xFF0,BS=4MB,BU=R/W,BW=8bit */ - -#if 0 /* Roese */ -/* Memory Bank 1 (Flash Bank 1, NAND-FLASH) initialization */ -#define CFG_EBC_PB1AP 0x92015480 -#define CFG_EBC_PB1CR 0xFF858000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=8bit */ - -/* Memory Bank 2 (CAN0, 1) initialization */ -#define CFG_EBC_PB2AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */ -#define CFG_EBC_PB2CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */ - -/* Memory Bank 3 (CompactFlash IDE) initialization */ -#define CFG_EBC_PB3AP 0x010053C0 /* BWT=2,WBN=1,WBF=1,TH=1,RE=1,SOR=1,BEM=1 */ -#define CFG_EBC_PB3CR 0xF011A000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=16bit */ - -/* Memory Bank 4 (NVRAM/RTC) initialization */ -#define CFG_EBC_PB4AP 0x01005280 /* TWT=2,WBN=1,WBF=1,TH=1,SOR=1 */ -#define CFG_EBC_PB4CR 0xF0218000 /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit */ +#ifdef CONFIG_PPCHAMELEON_SMI712 +/* + * Video console (graphic: SMI LynxEM) + */ +#define CONFIG_VIDEO +#define CONFIG_CFB_CONSOLE +#define CONFIG_VIDEO_SMI_LYNXEM +#define CONFIG_VIDEO_LOGO +/*#define CONFIG_VIDEO_BMP_LOGO*/ +#define CONFIG_CONSOLE_EXTRA_INFO +#define CONFIG_VGA_AS_SINGLE_DEVICE +/* This is the base address (on 405EP-side) used to generate I/O accesses on PCI bus */ +#define CFG_ISA_IO 0xE8000000 +/* see also drivers/videomodes.c */ +#define CFG_DEFAULT_VIDEO_MODE 0x303 #endif /*----------------------------------------------------------------------- @@ -485,6 +511,7 @@ #define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SDRAM */ #define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */ + #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET @@ -525,7 +552,6 @@ /*--------------------------------------------------------------------*/ #ifdef CONFIG_NO_SERIAL_EEPROM - /* !----------------------------------------------------------------------- ! Defines for entry options. @@ -537,7 +563,6 @@ #define DIMM_READ_ADDR 0xAB #define DIMM_WRITE_ADDR 0xAA - #define CPC0_PLLMR0 (CNTRL_DCR_BASE+0x0) /* PLL mode 0 register */ #define CPC0_BOOT (CNTRL_DCR_BASE+0x1) /* Chip Clock Status register */ #define CPC0_CR1 (CNTRL_DCR_BASE+0x2) /* Chip Control 1 register */ @@ -649,50 +674,92 @@ #define PLL_PCIDIV_3 0x00000002 #define PLL_PCIDIV_4 0x00000003 + +#ifdef CONFIG_PPCHAMELEON_CLK_25 +/* CPU - PLB/SDRAM - EBC - OPB - PCI (assuming a 25.0 MHz input clock to the 405EP) */ +#define PPCHAMELEON_PLLMR0_133_133_33_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \ + PLL_MALDIV_1 | PLL_PCIDIV_4) +#define PPCHAMELEON_PLLMR1_133_133_33_66_33 (PLL_FBKDIV_8 | \ + PLL_FWDDIVA_6 | PLL_FWDDIVB_4 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) + +#define PPCHAMELEON_PLLMR0_200_100_50_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \ + PLL_MALDIV_1 | PLL_PCIDIV_4) +#define PPCHAMELEON_PLLMR1_200_100_50_33 (PLL_FBKDIV_8 | \ + PLL_FWDDIVA_4 | PLL_FWDDIVB_4 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) + +#define PPCHAMELEON_PLLMR0_266_133_33_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \ + PLL_MALDIV_1 | PLL_PCIDIV_4) +#define PPCHAMELEON_PLLMR1_266_133_33_66_33 (PLL_FBKDIV_8 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_4 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) + +#define PPCHAMELEON_PLLMR0_333_111_37_55_55 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \ + PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \ + PLL_MALDIV_1 | PLL_PCIDIV_2) +#define PPCHAMELEON_PLLMR1_333_111_37_55_55 (PLL_FBKDIV_10 | \ + PLL_FWDDIVA_3 | PLL_FWDDIVB_4 | \ + PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI) + +#elif (defined (CONFIG_PPCHAMELEON_CLK_33)) + /* CPU - PLB/SDRAM - EBC - OPB - PCI (assuming a 33.3MHz input clock to the 405EP) */ -#define PLLMR0_133_133_33_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \ +#define PPCHAMELEON_PLLMR0_133_133_33_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_1 | \ PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \ PLL_MALDIV_1 | PLL_PCIDIV_4) -#define PLLMR1_133_133_33_66_33 (PLL_FBKDIV_4 | \ +#define PPCHAMELEON_PLLMR1_133_133_33_66_33 (PLL_FBKDIV_4 | \ PLL_FWDDIVA_6 | PLL_FWDDIVB_6 | \ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) -#define PLLMR0_200_100_50_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ + +#define PPCHAMELEON_PLLMR0_200_100_50_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \ PLL_MALDIV_1 | PLL_PCIDIV_4) -#define PLLMR1_200_100_50_33 (PLL_FBKDIV_6 | \ +#define PPCHAMELEON_PLLMR1_200_100_50_33 (PLL_FBKDIV_6 | \ PLL_FWDDIVA_4 | PLL_FWDDIVB_4 | \ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) -#define PLLMR0_266_133_33_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ + +#define PPCHAMELEON_PLLMR0_266_133_33_66_33 (PLL_CPUDIV_1 | PLL_PLBDIV_2 | \ PLL_OPBDIV_2 | PLL_EXTBUSDIV_4 | \ PLL_MALDIV_1 | PLL_PCIDIV_4) -#define PLLMR1_266_133_33_66_33 (PLL_FBKDIV_8 | \ +#define PPCHAMELEON_PLLMR1_266_133_33_66_33 (PLL_FBKDIV_8 | \ PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_LOW) -#define PLLMR0_333_111_37_55_55 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \ + +#define PPCHAMELEON_PLLMR0_333_111_37_55_55 (PLL_CPUDIV_1 | PLL_PLBDIV_3 | \ PLL_OPBDIV_2 | PLL_EXTBUSDIV_3 | \ PLL_MALDIV_1 | PLL_PCIDIV_2) -#define PLLMR1_333_111_37_55_55 (PLL_FBKDIV_10 | \ +#define PPCHAMELEON_PLLMR1_333_111_37_55_55 (PLL_FBKDIV_10 | \ PLL_FWDDIVA_3 | PLL_FWDDIVB_3 | \ PLL_TUNE_15_M_40 | PLL_TUNE_VCO_HI) +#else +#error "* External frequency (SysClk) not defined! *" +#endif + #if (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_HI) /* Model HI */ -#define PLLMR0_DEFAULT PLLMR0_333_111_37_55_55 -#define PLLMR1_DEFAULT PLLMR1_333_111_37_55_55 +#define PLLMR0_DEFAULT PPCHAMELEON_PLLMR0_333_111_37_55_55 +#define PLLMR1_DEFAULT PPCHAMELEON_PLLMR1_333_111_37_55_55 +#define CFG_OPB_FREQ 55555555 /* Model ME */ #elif (CONFIG_PPCHAMELEON_MODULE_MODEL == CONFIG_PPCHAMELEON_MODULE_ME) -#define PLLMR0_DEFAULT PLLMR0_266_133_33_66_33 -#define PLLMR1_DEFAULT PLLMR1_266_133_33_66_33 +#define PLLMR0_DEFAULT PPCHAMELEON_PLLMR0_266_133_33_66_33 +#define PLLMR1_DEFAULT PPCHAMELEON_PLLMR1_266_133_33_66_33 +#define CFG_OPB_FREQ 66666666 #else /* Model BA (default) */ -#define PLLMR0_DEFAULT PLLMR0_133_133_33_66_33 -#define PLLMR1_DEFAULT PLLMR1_133_133_33_66_33 - +#define PLLMR0_DEFAULT PPCHAMELEON_PLLMR0_133_133_33_66_33 +#define PLLMR1_DEFAULT PPCHAMELEON_PLLMR1_133_133_33_66_33 +#define CFG_OPB_FREQ 66666666 #endif -#endif /* CONFIG_NO_SERIAL_EEPROM */ +#endif -#define CONFIG_JFFS2_NAND 1 /* jffs2 on nand support */ +#define CONFIG_JFFS2_NAND 0 /* jffs2 on nand support */ #define CONFIG_JFFS2_NAND_DEV 0 /* nand device jffs2 lives on */ #define CONFIG_JFFS2_NAND_OFF 0 /* start of jffs2 partition */ #define CONFIG_JFFS2_NAND_SIZE 2*1024*1024 /* size of jffs2 partition */ -- 2.30.2