From e519eedb6848198cb6fb7f50abb2e416309c0ce5 Mon Sep 17 00:00:00 2001 From: Mathieu Malaterre Date: Fri, 15 Dec 2017 13:46:48 +0100 Subject: [PATCH] arm: zx: dts: Remove leading 0x and 0s from bindings notation Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" and Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This will solve as a side effect warning: Warning (simple_bus_reg): Node /XXX@ simple-bus unit address format error, expected "" This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation") Reported-by: David Daney Suggested-by: Rob Herring Signed-off-by: Mathieu Malaterre Signed-off-by: Arnd Bergmann --- arch/arm/boot/dts/zx296702.dtsi | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/boot/dts/zx296702.dtsi b/arch/arm/boot/dts/zx296702.dtsi index 8a74efdb6360..240e7a23d81f 100644 --- a/arch/arm/boot/dts/zx296702.dtsi +++ b/arch/arm/boot/dts/zx296702.dtsi @@ -56,7 +56,7 @@ clocks = <&topclk ZX296702_A9_PERIPHCLK>; }; - l2cc: l2-cache-controller@0x00c00000 { + l2cc: l2-cache-controller@c00000 { compatible = "arm,pl310-cache"; reg = <0x00c00000 0x1000>; cache-unified; @@ -67,30 +67,30 @@ arm,double-linefill-incr = <0>; }; - pcu: pcu@0xa0008000 { + pcu: pcu@a0008000 { compatible = "zte,zx296702-pcu"; reg = <0xa0008000 0x1000>; }; - topclk: topclk@0x09800000 { + topclk: topclk@9800000 { compatible = "zte,zx296702-topcrm-clk"; reg = <0x09800000 0x1000>; #clock-cells = <1>; }; - lsp1clk: lsp1clk@0x09400000 { + lsp1clk: lsp1clk@9400000 { compatible = "zte,zx296702-lsp1crpm-clk"; reg = <0x09400000 0x1000>; #clock-cells = <1>; }; - lsp0clk: lsp0clk@0x0b000000 { + lsp0clk: lsp0clk@b000000 { compatible = "zte,zx296702-lsp0crpm-clk"; reg = <0x0b000000 0x1000>; #clock-cells = <1>; }; - uart0: serial@0x09405000 { + uart0: serial@9405000 { compatible = "zte,zx296702-uart"; reg = <0x09405000 0x1000>; interrupts = ; @@ -98,7 +98,7 @@ status = "disabled"; }; - uart1: serial@0x09406000 { + uart1: serial@9406000 { compatible = "zte,zx296702-uart"; reg = <0x09406000 0x1000>; interrupts = ; @@ -106,7 +106,7 @@ status = "disabled"; }; - mmc0: mmc@0x09408000 { + mmc0: mmc@9408000 { compatible = "snps,dw-mshc"; #address-cells = <1>; #size-cells = <0>; @@ -119,7 +119,7 @@ status = "disabled"; }; - mmc1: mmc@0x0b003000 { + mmc1: mmc@b003000 { compatible = "snps,dw-mshc"; #address-cells = <1>; #size-cells = <0>; @@ -132,7 +132,7 @@ status = "disabled"; }; - sysctrl: sysctrl@0xa0007000 { + sysctrl: sysctrl@a0007000 { compatible = "zte,sysctrl", "syscon"; reg = <0xa0007000 0x1000>; }; -- 2.30.2