From e40060772d85f3534d3d517197696e24bb01f45b Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 14 May 2008 09:19:30 -0400 Subject: [PATCH] sata_mv: fis irq register fixes Fix handling of the FIS_IRQ_CAUSE register in sata_mv. This register exists *only* on GenIIe devices, so don't bother writing to it on older chips. Also, it has to be read/cleared in mv_err_intr() before clearing the main ERR_IRQ_CAUSE register. This keeps sata_mv from getting stuck forever on certain error types. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik --- drivers/ata/sata_mv.c | 16 ++++++++++++---- 1 file changed, 12 insertions(+), 4 deletions(-) diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index bbacdd90f554..2a23d7ae4769 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -886,7 +886,8 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio, mv_edma_cfg(ap, want_ncq); /* clear FIS IRQ Cause */ - writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS); + if (IS_GEN_IIE(hpriv)) + writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS); mv_set_edma_ptrs(port_mmio, hpriv, pp); @@ -1812,6 +1813,7 @@ static void mv_err_intr(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); u32 edma_err_cause, eh_freeze_mask, serr = 0; + u32 fis_cause = 0; struct mv_port_priv *pp = ap->private_data; struct mv_host_priv *hpriv = ap->host->private_data; unsigned int action = 0, err_mask = 0; @@ -1821,16 +1823,19 @@ static void mv_err_intr(struct ata_port *ap) /* * Read and clear the SError and err_cause bits. + * For GenIIe, if EDMA_ERR_TRANS_IRQ_7 is set, we also must read/clear + * the FIS_IRQ_CAUSE register before clearing edma_err_cause. */ sata_scr_read(&ap->link, SCR_ERROR, &serr); sata_scr_write_flush(&ap->link, SCR_ERROR, serr); edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + if (IS_GEN_IIE(hpriv) && (edma_err_cause & EDMA_ERR_TRANS_IRQ_7)) { + fis_cause = readl(port_mmio + SATA_FIS_IRQ_CAUSE_OFS); + writelfl(~fis_cause, port_mmio + SATA_FIS_IRQ_CAUSE_OFS); + } writelfl(~edma_err_cause, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); - ata_port_printk(ap, KERN_INFO, "%s: err_cause=%08x pp_flags=0x%x\n", - __func__, edma_err_cause, pp->pp_flags); - if (edma_err_cause & EDMA_ERR_DEV) { /* * Device errors during FIS-based switching operation @@ -1844,6 +1849,9 @@ static void mv_err_intr(struct ata_port *ap) ata_ehi_clear_desc(ehi); ata_ehi_push_desc(ehi, "edma_err_cause=%08x pp_flags=%08x", edma_err_cause, pp->pp_flags); + + if (IS_GEN_IIE(hpriv) && (edma_err_cause & EDMA_ERR_TRANS_IRQ_7)) + ata_ehi_push_desc(ehi, "fis_cause=%08x", fis_cause); /* * All generations share these EDMA error cause bits: */ -- 2.30.2