From e37212aa5df1937bc19c0d0982d216675020a7ca Mon Sep 17 00:00:00 2001 From: "Lad, Prabhakar" Date: Wed, 3 Oct 2012 12:05:00 +0530 Subject: [PATCH] ARM: davinci: dm644x: fix out range signal for ED Fix the video clock setting when custom timings are used with pclock <= 27MHz. Existing video clock selection uses PLL2 mode which results in a 54MHz clock whereas using the MXI mode results in a 27MHz clock (which is the one actually desired). This bug affects the Enhanced Definition (ED) support on DM644x. Without this patch, out-range signals errors are were observed on the TV when viewing ED. An out-of-range signal is often caused when the field rate is above the rate that the television will handle. Signed-off-by: Lad, Prabhakar Signed-off-by: Manjunath Hadli Cc: Sekhar Nori [nsekhar@ti.com: reword commit message based on on-list discussion] Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/dm644x.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index cd0c8b1e1ecf..14e9947bad6e 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -713,8 +713,7 @@ static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type, break; case VPBE_ENC_CUSTOM_TIMINGS: if (pclock <= 27000000) { - v |= DM644X_VPSS_MUXSEL_PLL2_MODE | - DM644X_VPSS_DACCLKEN; + v |= DM644X_VPSS_DACCLKEN; writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); } else { /* -- 2.30.2