From e36bdd5dc5bf48fc0102394736c24a075959bc53 Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Sun, 31 May 2020 12:46:26 +0200 Subject: [PATCH] ath79: fix LEDs for GL.inet GL-AR150 Since the wireless LED was used for boot and set up with a DT trigger, the WiFi indication hasn't worked on ath79 at all. In addition, a look into the manual revealed that the OEM configuration is as follows: LED 1 (green): power LED 2 (green): configurable LED 3 (red): wireless So, let's just keep the WiFi trigger and convert the rest to its "intended" use. Signed-off-by: Adrian Schmutzler (cherry picked from commit 705fe43522c756962589b360141d4c398363ce1c) --- .../linux/ath79/base-files/etc/board.d/01_leds | 4 ---- .../linux/ath79/dts/ar9330_glinet_gl-ar150.dts | 18 ++++++++++-------- 2 files changed, 10 insertions(+), 12 deletions(-) diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds index c3fa7f6a61..058ab006e5 100755 --- a/target/linux/ath79/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/base-files/etc/board.d/01_leds @@ -74,10 +74,6 @@ etactica,eg200) ucidef_set_led_oneshot "modbus" "Modbus" "$boardname:red:modbus" "100" "33" ucidef_set_led_default "etactica" "etactica" "$boardname:red:etactica" "ignore" ;; -glinet,gl-ar150) - ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth1" - ucidef_set_led_switch "lan" "LAN" "$boardname:green:lan" "switch0" "0x02" - ;; glinet,gl-ar300m-nand|\ glinet,gl-ar300m-nor) ucidef_set_led_netdev "lan" "LAN" "gl-ar300m:green:lan" "eth0" diff --git a/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts b/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts index 76f6e80236..c5f559bb36 100644 --- a/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts +++ b/target/linux/ath79/dts/ar9330_glinet_gl-ar150.dts @@ -12,28 +12,30 @@ aliases { serial0 = &uart; - led-boot = &wlan; - led-failsafe = &wlan; - led-upgrade = &wlan; + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; }; leds { compatible = "gpio-leds"; - wlan: wlan { + wlan { label = "gl-ar150:orange:wlan"; gpios = <&gpio 0 GPIO_ACTIVE_HIGH>; linux,default-trigger = "phy0tpt"; }; - lan { - label = "gl-ar150:green:lan"; + configurable { + label = "gl-ar150:green:configurable"; gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; }; - wan { - label = "gl-ar150:green:wan"; + led_power: power { + label = "gl-ar150:green:power"; gpios = <&gpio 15 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; }; -- 2.30.2