From e36930764471711c12a7fac8dfb9535b96a284ca Mon Sep 17 00:00:00 2001 From: =?utf8?q?Andreas=20Bie=C3=9Fmann?= Date: Mon, 11 May 2015 13:07:25 +0200 Subject: [PATCH] avr32: delete non generic board hammerhead MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Signed-off-by: Andreas Bießmann --- arch/avr32/Kconfig | 4 - board/miromico/hammerhead/Kconfig | 15 --- board/miromico/hammerhead/MAINTAINERS | 6 - board/miromico/hammerhead/Makefile | 6 - board/miromico/hammerhead/hammerhead.c | 91 --------------- configs/hammerhead_defconfig | 7 -- include/configs/hammerhead.h | 147 ------------------------- 7 files changed, 276 deletions(-) delete mode 100644 board/miromico/hammerhead/Kconfig delete mode 100644 board/miromico/hammerhead/MAINTAINERS delete mode 100644 board/miromico/hammerhead/Makefile delete mode 100644 board/miromico/hammerhead/hammerhead.c delete mode 100644 configs/hammerhead_defconfig delete mode 100644 include/configs/hammerhead.h diff --git a/arch/avr32/Kconfig b/arch/avr32/Kconfig index 34881edd45..cfcdbe7565 100644 --- a/arch/avr32/Kconfig +++ b/arch/avr32/Kconfig @@ -32,9 +32,6 @@ config TARGET_GRASSHOPPER config TARGET_MIMC200 bool "Support mimc200" -config TARGET_HAMMERHEAD - bool "Support hammerhead" - endchoice source "board/atmel/atngw100/Kconfig" @@ -42,6 +39,5 @@ source "board/atmel/atngw100mkii/Kconfig" source "board/atmel/atstk1000/Kconfig" source "board/in-circuit/grasshopper/Kconfig" source "board/mimc/mimc200/Kconfig" -source "board/miromico/hammerhead/Kconfig" endmenu diff --git a/board/miromico/hammerhead/Kconfig b/board/miromico/hammerhead/Kconfig deleted file mode 100644 index 1f09ef782e..0000000000 --- a/board/miromico/hammerhead/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_HAMMERHEAD - -config SYS_BOARD - default "hammerhead" - -config SYS_VENDOR - default "miromico" - -config SYS_SOC - default "at32ap700x" - -config SYS_CONFIG_NAME - default "hammerhead" - -endif diff --git a/board/miromico/hammerhead/MAINTAINERS b/board/miromico/hammerhead/MAINTAINERS deleted file mode 100644 index a87ceeeb73..0000000000 --- a/board/miromico/hammerhead/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -HAMMERHEAD BOARD -M: Alex Raimondi -S: Maintained -F: board/miromico/hammerhead/ -F: include/configs/hammerhead.h -F: configs/hammerhead_defconfig diff --git a/board/miromico/hammerhead/Makefile b/board/miromico/hammerhead/Makefile deleted file mode 100644 index 638a9df930..0000000000 --- a/board/miromico/hammerhead/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -# -# Copyright (C) 2008 Miromico AG -# -# SPDX-License-Identifier: GPL-2.0+ - -obj-y := hammerhead.o diff --git a/board/miromico/hammerhead/hammerhead.c b/board/miromico/hammerhead/hammerhead.c deleted file mode 100644 index a0c7d3b323..0000000000 --- a/board/miromico/hammerhead/hammerhead.c +++ /dev/null @@ -1,91 +0,0 @@ -/* - * Copyright (C) 2008 Miromico AG - * - * Mostly copied form atmel ATNGW100 sources - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - -struct mmu_vm_range mmu_vmr_table[CONFIG_SYS_NR_VM_REGIONS] = { - { - .virt_pgno = CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT, - .nr_pages = CONFIG_SYS_FLASH_SIZE >> MMU_PAGE_SHIFT, - .phys = (CONFIG_SYS_FLASH_BASE >> MMU_PAGE_SHIFT) - | MMU_VMR_CACHE_NONE, - }, { - .virt_pgno = CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT, - .nr_pages = EBI_SDRAM_SIZE >> MMU_PAGE_SHIFT, - .phys = (CONFIG_SYS_SDRAM_BASE >> MMU_PAGE_SHIFT) - | MMU_VMR_CACHE_WRBACK, - }, -}; - -static const struct sdram_config sdram_config = { - .data_bits = SDRAM_DATA_32BIT, - .row_bits = 13, - .col_bits = 9, - .bank_bits = 2, - .cas = 3, - .twr = 2, - .trc = 7, - .trp = 2, - .trcd = 2, - .tras = 5, - .txsr = 5, - /* 7.81 us */ - .refresh_period = (781 * (SDRAMC_BUS_HZ / 1000)) / 100000, -}; - -#ifdef CONFIG_CMD_NET -int board_eth_init(bd_t *bis) -{ - return macb_eth_initialize(0, (void *)ATMEL_BASE_MACB0, - bis->bi_phy_id[0]); -} -#endif - -int board_early_init_f(void) -{ - /* Enable SDRAM in the EBI mux */ - hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE)); - - portmux_enable_ebi(32, 23, 0, PORTMUX_DRIVE_HIGH); - sdram_init(uncached(EBI_SDRAM_BASE), &sdram_config); - - portmux_enable_usart1(PORTMUX_DRIVE_MIN); - -#if defined(CONFIG_MACB) - portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH); -#endif -#if defined(CONFIG_MMC) - portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW); -#endif - return 0; -} - -int board_early_init_r(void) -{ - gd->bd->bi_phy_id[0] = 0x01; - return 0; -} - -int board_postclk_init(void) -{ - /* Hammerhead boards uses GCLK3 as 25MHz output to ethernet PHY */ - gclk_enable_output(3, PORTMUX_DRIVE_LOW); - gclk_set_rate(3, GCLK_PARENT_OSC0, 25000000); - return 0; -} diff --git a/configs/hammerhead_defconfig b/configs/hammerhead_defconfig deleted file mode 100644 index 278c76a4fe..0000000000 --- a/configs/hammerhead_defconfig +++ /dev/null @@ -1,7 +0,0 @@ -CONFIG_AVR32=y -CONFIG_CMD_NET=y -CONFIG_TARGET_HAMMERHEAD=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds" -CONFIG_AUTOBOOT_DELAY_STR="d" -CONFIG_AUTOBOOT_STOP_STR=" " diff --git a/include/configs/hammerhead.h b/include/configs/hammerhead.h deleted file mode 100644 index 274f2a81b8..0000000000 --- a/include/configs/hammerhead.h +++ /dev/null @@ -1,147 +0,0 @@ -/* - * Copyright (C) 2008 Miromico AG - * - * Configuration settings for the Miromico Hammerhead AVR32 board - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_AT32AP -#define CONFIG_AT32AP7000 -#define CONFIG_HAMMERHEAD - -/* - * Set up the PLL to run at 125 MHz, the CPU to run at the PLL - * frequency, the HSB and PBB busses to run at 1/2 the PLL frequency - * and the PBA bus to run at 1/4 the PLL frequency. - */ -#define CONFIG_PLL -#define CONFIG_SYS_POWER_MANAGER -#define CONFIG_SYS_OSC0_HZ 25000000 -#define CONFIG_SYS_PLL0_DIV 1 -#define CONFIG_SYS_PLL0_MUL 5 -#define CONFIG_SYS_PLL0_SUPPRESS_CYCLES 16 -#define CONFIG_SYS_CLKDIV_CPU 0 -#define CONFIG_SYS_CLKDIV_HSB 1 -#define CONFIG_SYS_CLKDIV_PBA 2 -#define CONFIG_SYS_CLKDIV_PBB 1 - -/* Reserve VM regions for SDRAM and NOR flash */ -#define CONFIG_SYS_NR_VM_REGIONS 2 - -/* - * The PLLOPT register controls the PLL like this: - * icp = PLLOPT<2> - * ivco = PLLOPT<1:0> - * - * We want icp=1 (default) and ivco=0 (80-160 MHz) or ivco=2 (150-240MHz). - */ -#define CONFIG_SYS_PLL0_OPT 0x04 - -#define CONFIG_USART_BASE ATMEL_BASE_USART1 -#define CONFIG_USART_ID 1 - -#define CONFIG_HOSTNAME hammerhead - -/* User serviceable stuff */ -#define CONFIG_DOS_PARTITION - -#define CONFIG_CMDLINE_TAG -#define CONFIG_SETUP_MEMORY_TAGS -#define CONFIG_INITRD_TAG - -#define CONFIG_STACKSIZE (2048) - -#define CONFIG_BAUDRATE 115200 -#define CONFIG_BOOTARGS \ - "console=ttyS0 root=mtd1 rootfstype=jffs2" -#define CONFIG_BOOTCOMMAND \ - "fsload; bootm" - -#define CONFIG_BOOTDELAY 1 - -/* - * After booting the board for the first time, new ethernet address - * should be generated and assigned to the environment variables - * "ethaddr". This is normally done during production. - */ -#define CONFIG_OVERWRITE_ETHADDR_ONCE - -/* - * BOOTP/DHCP options - */ -#define CONFIG_BOOTP_SUBNETMASK -#define CONFIG_BOOTP_GATEWAY - -/* - * Command line configuration. - */ -#include - -#define CONFIG_CMD_ASKENV -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_EXT2 -#define CONFIG_CMD_FAT -#define CONFIG_CMD_JFFS2 -#define CONFIG_CMD_MMC -#undef CONFIG_CMD_FPGA -#undef CONFIG_CMD_SETGETDCR - -#define CONFIG_ATMEL_USART -#define CONFIG_MACB -#define CONFIG_PORTMUX_PIO -#define CONFIG_SYS_NR_PIOS 5 -#define CONFIG_SYS_HSDRAMC -#define CONFIG_MMC -#define CONFIG_GENERIC_ATMEL_MCI -#define CONFIG_GENERIC_MMC - -#define CONFIG_SYS_DCACHE_LINESZ 32 -#define CONFIG_SYS_ICACHE_LINESZ 32 - -#define CONFIG_NR_DRAM_BANKS 1 - -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_FLASH_CFI_DRIVER - -#define CONFIG_SYS_FLASH_BASE 0x00000000 -#define CONFIG_SYS_FLASH_SIZE 0x800000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 135 - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_TEXT_BASE 0x00000000 - -#define CONFIG_SYS_INTRAM_BASE 0x24000000 -#define CONFIG_SYS_INTRAM_SIZE 0x8000 - -#define CONFIG_SYS_SDRAM_BASE 0x10000000 - -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SIZE 65536 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_FLASH_SIZE - CONFIG_ENV_SIZE) - -#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INTRAM_BASE + CONFIG_SYS_INTRAM_SIZE) - -#define CONFIG_SYS_MALLOC_LEN (256*1024) - - -/* Allow 4MB for the kernel run-time image */ -#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x00400000) -#define CONFIG_SYS_BOOTPARAMS_LEN (16 * 1024) - -/* Other configuration settings that shouldn't have to change all that often */ -#define CONFIG_SYS_PROMPT "Hammerhead> " -#define CONFIG_SYS_CBSIZE 256 -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -#define CONFIG_SYS_LONGHELP - -#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE -#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x1f00000) - -#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } - -#endif /* __CONFIG_H */ -- 2.30.2