From e327cfcb25422c91f4bb8e8a3488386ac95955f1 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 12 Jun 2019 14:52:39 -0300 Subject: [PATCH] docs: cdrom-standard.tex: convert from LaTeX to ReST This is the only LaTeX documentation file inside the documentation. Instead of having a Latex document directly there, convert it to ReST format, as this is the format we're using for docs. For now, let's keep the extension as .txt in order to avoid warnings when building the documentation with Sphinx. The next patch patch will rename it to .rst and add it to the building system. Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Jonathan Corbet --- Documentation/cdrom/Makefile | 21 - Documentation/cdrom/cdrom-standard.tex | 1026 ----------------------- Documentation/cdrom/cdrom-standard.txt | 1063 ++++++++++++++++++++++++ drivers/cdrom/cdrom.c | 2 +- 4 files changed, 1064 insertions(+), 1048 deletions(-) delete mode 100644 Documentation/cdrom/Makefile delete mode 100644 Documentation/cdrom/cdrom-standard.tex create mode 100644 Documentation/cdrom/cdrom-standard.txt diff --git a/Documentation/cdrom/Makefile b/Documentation/cdrom/Makefile deleted file mode 100644 index a19e321928e1..000000000000 --- a/Documentation/cdrom/Makefile +++ /dev/null @@ -1,21 +0,0 @@ -LATEXFILE = cdrom-standard - -all: - make clean - latex $(LATEXFILE) - latex $(LATEXFILE) - @if [ -x `which gv` ]; then \ - `dvips -q -t letter -o $(LATEXFILE).ps $(LATEXFILE).dvi` ;\ - `gv -antialias -media letter -nocenter $(LATEXFILE).ps` ;\ - else \ - `xdvi $(LATEXFILE).dvi &` ;\ - fi - make sortofclean - -clean: - rm -f $(LATEXFILE).ps $(LATEXFILE).dvi $(LATEXFILE).aux $(LATEXFILE).log - -sortofclean: - rm -f $(LATEXFILE).aux $(LATEXFILE).log - - diff --git a/Documentation/cdrom/cdrom-standard.tex b/Documentation/cdrom/cdrom-standard.tex deleted file mode 100644 index f7cd455973f7..000000000000 --- a/Documentation/cdrom/cdrom-standard.tex +++ /dev/null @@ -1,1026 +0,0 @@ -\documentclass{article} -\def\version{$Id: cdrom-standard.tex,v 1.9 1997/12/28 15:42:49 david Exp $} -\newcommand{\newsection}[1]{\newpage\section{#1}} - -\evensidemargin=0pt -\oddsidemargin=0pt -\topmargin=-\headheight \advance\topmargin by -\headsep -\textwidth=15.99cm \textheight=24.62cm % normal A4, 1'' margin - -\def\linux{{\sc Linux}} -\def\cdrom{{\sc cd-rom}} -\def\UCD{{\sc Uniform cd-rom Driver}} -\def\cdromc{{\tt {cdrom.c}}} -\def\cdromh{{\tt {cdrom.h}}} -\def\fo{\sl} % foreign words -\def\ie{{\fo i.e.}} -\def\eg{{\fo e.g.}} - -\everymath{\it} \everydisplay{\it} -\catcode `\_=\active \def_{\_\penalty100 } -\catcode`\<=\active \def<#1>{{\langle\hbox{\rm#1}\rangle}} - -\begin{document} -\title{A \linux\ \cdrom\ standard} -\author{David van Leeuwen\\{\normalsize\tt david@ElseWare.cistron.nl} -\\{\footnotesize updated by Erik Andersen {\tt(andersee@debian.org)}} -\\{\footnotesize updated by Jens Axboe {\tt(axboe@image.dk)}}} -\date{12 March 1999} - -\maketitle - -\newsection{Introduction} - -\linux\ is probably the Unix-like operating system that supports -the widest variety of hardware devices. The reasons for this are -presumably -\begin{itemize} -\item - The large list of hardware devices available for the many platforms - that \linux\ now supports (\ie, i386-PCs, Sparc Suns, etc.) -\item - The open design of the operating system, such that anybody can write a - driver for \linux. -\item - There is plenty of source code around as examples of how to write a driver. -\end{itemize} -The openness of \linux, and the many different types of available -hardware has allowed \linux\ to support many different hardware devices. -Unfortunately, the very openness that has allowed \linux\ to support -all these different devices has also allowed the behavior of each -device driver to differ significantly from one device to another. -This divergence of behavior has been very significant for \cdrom\ -devices; the way a particular drive reacts to a `standard' $ioctl()$ -call varies greatly from one device driver to another. To avoid making -their drivers totally inconsistent, the writers of \linux\ \cdrom\ -drivers generally created new device drivers by understanding, copying, -and then changing an existing one. Unfortunately, this practice did not -maintain uniform behavior across all the \linux\ \cdrom\ drivers. - -This document describes an effort to establish Uniform behavior across -all the different \cdrom\ device drivers for \linux. This document also -defines the various $ioctl$s, and how the low-level \cdrom\ device -drivers should implement them. Currently (as of the \linux\ 2.1.$x$ -development kernels) several low-level \cdrom\ device drivers, including -both IDE/ATAPI and SCSI, now use this Uniform interface. - -When the \cdrom\ was developed, the interface between the \cdrom\ drive -and the computer was not specified in the standards. As a result, many -different \cdrom\ interfaces were developed. Some of them had their -own proprietary design (Sony, Mitsumi, Panasonic, Philips), other -manufacturers adopted an existing electrical interface and changed -the functionality (CreativeLabs/SoundBlaster, Teac, Funai) or simply -adapted their drives to one or more of the already existing electrical -interfaces (Aztech, Sanyo, Funai, Vertos, Longshine, Optics Storage and -most of the `NoName' manufacturers). In cases where a new drive really -brought its own interface or used its own command set and flow control -scheme, either a separate driver had to be written, or an existing -driver had to be enhanced. History has delivered us \cdrom\ support for -many of these different interfaces. Nowadays, almost all new \cdrom\ -drives are either IDE/ATAPI or SCSI, and it is very unlikely that any -manufacturer will create a new interface. Even finding drives for the -old proprietary interfaces is getting difficult. - -When (in the 1.3.70's) I looked at the existing software interface, -which was expressed through \cdromh, it appeared to be a rather wild -set of commands and data formats.\footnote{I cannot recollect what -kernel version I looked at, then, presumably 1.2.13 and 1.3.34---the -latest kernel that I was indirectly involved in.} It seemed that many -features of the software interface had been added to accommodate the -capabilities of a particular drive, in an {\fo ad hoc\/} manner. More -importantly, it appeared that the behavior of the `standard' commands -was different for most of the different drivers: \eg, some drivers -close the tray if an $open()$ call occurs when the tray is open, while -others do not. Some drivers lock the door upon opening the device, to -prevent an incoherent file system, but others don't, to allow software -ejection. Undoubtedly, the capabilities of the different drives vary, -but even when two drives have the same capability their drivers' -behavior was usually different. - -I decided to start a discussion on how to make all the \linux\ \cdrom\ -drivers behave more uniformly. I began by contacting the developers of -the many \cdrom\ drivers found in the \linux\ kernel. Their reactions -encouraged me to write the \UCD\ which this document is intended to -describe. The implementation of the \UCD\ is in the file \cdromc. This -driver is intended to be an additional software layer that sits on top -of the low-level device drivers for each \cdrom\ drive. By adding this -additional layer, it is possible to have all the different \cdrom\ -devices behave {\em exactly\/} the same (insofar as the underlying -hardware will allow). - -The goal of the \UCD\ is {\em not\/} to alienate driver developers who -have not yet taken steps to support this effort. The goal of \UCD\ is -simply to give people writing application programs for \cdrom\ drives -{\em one\/} \linux\ \cdrom\ interface with consistent behavior for all -\cdrom\ devices. In addition, this also provides a consistent interface -between the low-level device driver code and the \linux\ kernel. Care -is taken that 100\,\% compatibility exists with the data structures and -programmer's interface defined in \cdromh. This guide was written to -help \cdrom\ driver developers adapt their code to use the \UCD\ code -defined in \cdromc. - -Personally, I think that the most important hardware interfaces are -the IDE/ATAPI drives and, of course, the SCSI drives, but as prices -of hardware drop continuously, it is also likely that people may have -more than one \cdrom\ drive, possibly of mixed types. It is important -that these drives behave in the same way. In December 1994, one of the -cheapest \cdrom\ drives was a Philips cm206, a double-speed proprietary -drive. In the months that I was busy writing a \linux\ driver for it, -proprietary drives became obsolete and IDE/ATAPI drives became the -standard. At the time of the last update to this document (November -1997) it is becoming difficult to even {\em find} anything less than a -16 speed \cdrom\ drive, and 24 speed drives are common. - -\newsection{Standardizing through another software level} -\label{cdrom.c} - -At the time this document was conceived, all drivers directly -implemented the \cdrom\ $ioctl()$ calls through their own routines. This -led to the danger of different drivers forgetting to do important things -like checking that the user was giving the driver valid data. More -importantly, this led to the divergence of behavior, which has already -been discussed. - -For this reason, the \UCD\ was created to enforce consistent \cdrom\ -drive behavior, and to provide a common set of services to the various -low-level \cdrom\ device drivers. The \UCD\ now provides another -software-level, that separates the $ioctl()$ and $open()$ implementation -from the actual hardware implementation. Note that this effort has -made few changes which will affect a user's application programs. The -greatest change involved moving the contents of the various low-level -\cdrom\ drivers' header files to the kernel's cdrom directory. This was -done to help ensure that the user is only presented with only one cdrom -interface, the interface defined in \cdromh. - -\cdrom\ drives are specific enough (\ie, different from other -block-devices such as floppy or hard disc drives), to define a set -of common {\em \cdrom\ device operations}, $_dops$. -These operations are different from the classical block-device file -operations, $_fops$. - -The routines for the \UCD\ interface level are implemented in the file -\cdromc. In this file, the \UCD\ interfaces with the kernel as a block -device by registering the following general $struct\ file_operations$: -$$ -\halign{$#$\ \hfil&$#$\ \hfil&$/*$ \rm# $*/$\hfil\cr -struct& file_operations\ cdrom_fops = \{\hidewidth\cr - &NULL, & lseek \cr - &block_read, & read---general block-dev read \cr - &block_write, & write---general block-dev write \cr - &NULL, & readdir \cr - &NULL, & select \cr - &cdrom_ioctl, & ioctl \cr - &NULL, & mmap \cr - &cdrom_open, & open \cr - &cdrom_release, & release \cr - &NULL, & fsync \cr - &NULL, & fasync \cr - &cdrom_media_changed, & media change \cr - &NULL & revalidate \cr -\};\cr -} -$$ - -Every active \cdrom\ device shares this $struct$. The routines -declared above are all implemented in \cdromc, since this file is the -place where the behavior of all \cdrom-devices is defined and -standardized. The actual interface to the various types of \cdrom\ -hardware is still performed by various low-level \cdrom-device -drivers. These routines simply implement certain {\em capabilities\/} -that are common to all \cdrom\ (and really, all removable-media -devices). - -Registration of a low-level \cdrom\ device driver is now done through -the general routines in \cdromc, not through the Virtual File System -(VFS) any more. The interface implemented in \cdromc\ is carried out -through two general structures that contain information about the -capabilities of the driver, and the specific drives on which the -driver operates. The structures are: -\begin{description} -\item[$cdrom_device_ops$] - This structure contains information about the low-level driver for a - \cdrom\ device. This structure is conceptually connected to the major - number of the device (although some drivers may have different - major numbers, as is the case for the IDE driver). -\item[$cdrom_device_info$] - This structure contains information about a particular \cdrom\ drive, - such as its device name, speed, etc. This structure is conceptually - connected to the minor number of the device. -\end{description} - -Registering a particular \cdrom\ drive with the \UCD\ is done by the -low-level device driver though a call to: -$$register_cdrom(struct\ cdrom_device_info * _info) -$$ -The device information structure, $_info$, contains all the -information needed for the kernel to interface with the low-level -\cdrom\ device driver. One of the most important entries in this -structure is a pointer to the $cdrom_device_ops$ structure of the -low-level driver. - -The device operations structure, $cdrom_device_ops$, contains a list -of pointers to the functions which are implemented in the low-level -device driver. When \cdromc\ accesses a \cdrom\ device, it does it -through the functions in this structure. It is impossible to know all -the capabilities of future \cdrom\ drives, so it is expected that this -list may need to be expanded from time to time as new technologies are -developed. For example, CD-R and CD-R/W drives are beginning to become -popular, and support will soon need to be added for them. For now, the -current $struct$ is: -$$ -\halign{$#$\ \hfil&$#$\ \hfil&\hbox to 10em{$#$\hss}& - $/*$ \rm# $*/$\hfil\cr -struct& cdrom_device_ops\ \{ \hidewidth\cr - &int& (* open)(struct\ cdrom_device_info *, int)\cr - &void& (* release)(struct\ cdrom_device_info *);\cr - &int& (* drive_status)(struct\ cdrom_device_info *, int);\cr - &unsigned\ int& (* check_events)(struct\ cdrom_device_info *, unsigned\ int, int);\cr - &int& (* media_changed)(struct\ cdrom_device_info *, int);\cr - &int& (* tray_move)(struct\ cdrom_device_info *, int);\cr - &int& (* lock_door)(struct\ cdrom_device_info *, int);\cr - &int& (* select_speed)(struct\ cdrom_device_info *, int);\cr - &int& (* select_disc)(struct\ cdrom_device_info *, int);\cr - &int& (* get_last_session) (struct\ cdrom_device_info *, - struct\ cdrom_multisession *{});\cr - &int& (* get_mcn)(struct\ cdrom_device_info *, struct\ cdrom_mcn *{});\cr - &int& (* reset)(struct\ cdrom_device_info *);\cr - &int& (* audio_ioctl)(struct\ cdrom_device_info *, unsigned\ int, - void *{});\cr -\noalign{\medskip} - &const\ int& capability;& capability flags \cr - &int& (* generic_packet)(struct\ cdrom_device_info *, struct\ packet_command *{});\cr -\};\cr -} -$$ -When a low-level device driver implements one of these capabilities, -it should add a function pointer to this $struct$. When a particular -function is not implemented, however, this $struct$ should contain a -NULL instead. The $capability$ flags specify the capabilities of the -\cdrom\ hardware and/or low-level \cdrom\ driver when a \cdrom\ drive -is registered with the \UCD. - -Note that most functions have fewer parameters than their -$blkdev_fops$ counterparts. This is because very little of the -information in the structures $inode$ and $file$ is used. For most -drivers, the main parameter is the $struct$ $cdrom_device_info$, from -which the major and minor number can be extracted. (Most low-level -\cdrom\ drivers don't even look at the major and minor number though, -since many of them only support one device.) This will be available -through $dev$ in $cdrom_device_info$ described below. - -The drive-specific, minor-like information that is registered with -\cdromc, currently contains the following fields: -$$ -\halign{$#$\ \hfil&$#$\ \hfil&\hbox to 10em{$#$\hss}& - $/*$ \rm# $*/$\hfil\cr -struct& cdrom_device_info\ \{ \hidewidth\cr - & const\ struct\ cdrom_device_ops *& ops;& device operations for this major\cr - & struct\ list_head& list;& linked list of all device_info\cr - & struct\ gendisk *& disk;& matching block layer disk\cr - & void *& handle;& driver-dependent data\cr -\noalign{\medskip} - & int& mask;& mask of capability: disables them \cr - & int& speed;& maximum speed for reading data \cr - & int& capacity;& number of discs in a jukebox \cr -\noalign{\medskip} - &unsigned\ int& options : 30;& options flags \cr - &unsigned& mc_flags : 2;& media-change buffer flags \cr - &unsigned\ int& vfs_events;& cached events for vfs path\cr - &unsigned\ int& ioctl_events;& cached events for ioctl path\cr - & int& use_count;& number of times device is opened\cr - & char& name[20];& name of the device type\cr -\noalign{\medskip} - &__u8& sanyo_slot : 2;& Sanyo 3-CD changer support\cr - &__u8& keeplocked : 1;& CDROM_LOCKDOOR status\cr - &__u8& reserved : 5;& not used yet\cr - & int& cdda_method;& see CDDA_* flags\cr - &__u8& last_sense;& saves last sense key\cr - &__u8& media_written;& dirty flag, DVD+RW bookkeeping\cr - &unsigned\ short& mmc3_profile;& current MMC3 profile\cr - & int& for_data;& unknown:TBD\cr - & int\ (* exit)\ (struct\ cdrom_device_info *);&& unknown:TBD\cr - & int& mrw_mode_page;& which MRW mode page is in use\cr -\}\cr -}$$ -Using this $struct$, a linked list of the registered minor devices is -built, using the $next$ field. The device number, the device operations -struct and specifications of properties of the drive are stored in this -structure. - -The $mask$ flags can be used to mask out some of the capabilities listed -in $ops\to capability$, if a specific drive doesn't support a feature -of the driver. The value $speed$ specifies the maximum head-rate of the -drive, measured in units of normal audio speed (176\,kB/sec raw data or -150\,kB/sec file system data). The parameters are declared $const$ -because they describe properties of the drive, which don't change after -registration. - -A few registers contain variables local to the \cdrom\ drive. The -flags $options$ are used to specify how the general \cdrom\ routines -should behave. These various flags registers should provide enough -flexibility to adapt to the different users' wishes (and {\em not\/} the -`arbitrary' wishes of the author of the low-level device driver, as is -the case in the old scheme). The register $mc_flags$ is used to buffer -the information from $media_changed()$ to two separate queues. Other -data that is specific to a minor drive, can be accessed through $handle$, -which can point to a data structure specific to the low-level driver. -The fields $use_count$, $next$, $options$ and $mc_flags$ need not be -initialized. - -The intermediate software layer that \cdromc\ forms will perform some -additional bookkeeping. The use count of the device (the number of -processes that have the device opened) is registered in $use_count$. The -function $cdrom_ioctl()$ will verify the appropriate user-memory regions -for read and write, and in case a location on the CD is transferred, -it will `sanitize' the format by making requests to the low-level -drivers in a standard format, and translating all formats between the -user-software and low level drivers. This relieves much of the drivers' -memory checking and format checking and translation. Also, the necessary -structures will be declared on the program stack. - -The implementation of the functions should be as defined in the -following sections. Two functions {\em must\/} be implemented, namely -$open()$ and $release()$. Other functions may be omitted, their -corresponding capability flags will be cleared upon registration. -Generally, a function returns zero on success and negative on error. A -function call should return only after the command has completed, but of -course waiting for the device should not use processor time. - -\subsection{$Int\ open(struct\ cdrom_device_info * cdi, int\ purpose)$} - -$Open()$ should try to open the device for a specific $purpose$, which -can be either: -\begin{itemize} -\item[0] Open for reading data, as done by {\tt {mount()}} (2), or the -user commands {\tt {dd}} or {\tt {cat}}. -\item[1] Open for $ioctl$ commands, as done by audio-CD playing -programs. -\end{itemize} -Notice that any strategic code (closing tray upon $open()$, etc.)\ is -done by the calling routine in \cdromc, so the low-level routine -should only be concerned with proper initialization, such as spinning -up the disc, etc. % and device-use count - - -\subsection{$Void\ release(struct\ cdrom_device_info * cdi)$} - - -Device-specific actions should be taken such as spinning down the device. -However, strategic actions such as ejection of the tray, or unlocking -the door, should be left over to the general routine $cdrom_release()$. -This is the only function returning type $void$. - -\subsection{$Int\ drive_status(struct\ cdrom_device_info * cdi, int\ slot_nr)$} -\label{drive status} - -The function $drive_status$, if implemented, should provide -information on the status of the drive (not the status of the disc, -which may or may not be in the drive). If the drive is not a changer, -$slot_nr$ should be ignored. In \cdromh\ the possibilities are listed: -$$ -\halign{$#$\ \hfil&$/*$ \rm# $*/$\hfil\cr -CDS_NO_INFO& no information available\cr -CDS_NO_DISC& no disc is inserted, tray is closed\cr -CDS_TRAY_OPEN& tray is opened\cr -CDS_DRIVE_NOT_READY& something is wrong, tray is moving?\cr -CDS_DISC_OK& a disc is loaded and everything is fine\cr -} -$$ - -\subsection{$Int\ media_changed(struct\ cdrom_device_info * cdi, int\ disc_nr)$} - -This function is very similar to the original function in $struct\ -file_operations$. It returns 1 if the medium of the device $cdi\to -dev$ has changed since the last call, and 0 otherwise. The parameter -$disc_nr$ identifies a specific slot in a juke-box, it should be -ignored for single-disc drives. Note that by `re-routing' this -function through $cdrom_media_changed()$, we can implement separate -queues for the VFS and a new $ioctl()$ function that can report device -changes to software (\eg, an auto-mounting daemon). - -\subsection{$Int\ tray_move(struct\ cdrom_device_info * cdi, int\ position)$} - -This function, if implemented, should control the tray movement. (No -other function should control this.) The parameter $position$ controls -the desired direction of movement: -\begin{itemize} -\item[0] Close tray -\item[1] Open tray -\end{itemize} -This function returns 0 upon success, and a non-zero value upon -error. Note that if the tray is already in the desired position, no -action need be taken, and the return value should be 0. - -\subsection{$Int\ lock_door(struct\ cdrom_device_info * cdi, int\ lock)$} - -This function (and no other code) controls locking of the door, if the -drive allows this. The value of $lock$ controls the desired locking -state: -\begin{itemize} -\item[0] Unlock door, manual opening is allowed -\item[1] Lock door, tray cannot be ejected manually -\end{itemize} -This function returns 0 upon success, and a non-zero value upon -error. Note that if the door is already in the requested state, no -action need be taken, and the return value should be 0. - -\subsection{$Int\ select_speed(struct\ cdrom_device_info * cdi, int\ speed)$} - -Some \cdrom\ drives are capable of changing their head-speed. There -are several reasons for changing the speed of a \cdrom\ drive. Badly -pressed \cdrom s may benefit from less-than-maximum head rate. Modern -\cdrom\ drives can obtain very high head rates (up to $24\times$ is -common). It has been reported that these drives can make reading -errors at these high speeds, reducing the speed can prevent data loss -in these circumstances. Finally, some of these drives can -make an annoyingly loud noise, which a lower speed may reduce. %Finally, -%although the audio-low-pass filters probably aren't designed for it, -%more than real-time playback of audio might be used for high-speed -%copying of audio tracks. - -This function specifies the speed at which data is read or audio is -played back. The value of $speed$ specifies the head-speed of the -drive, measured in units of standard cdrom speed (176\,kB/sec raw data -or 150\,kB/sec file system data). So to request that a \cdrom\ drive -operate at 300\,kB/sec you would call the CDROM_SELECT_SPEED $ioctl$ -with $speed=2$. The special value `0' means `auto-selection', \ie, -maximum data-rate or real-time audio rate. If the drive doesn't have -this `auto-selection' capability, the decision should be made on the -current disc loaded and the return value should be positive. A negative -return value indicates an error. - -\subsection{$Int\ select_disc(struct\ cdrom_device_info * cdi, int\ number)$} - -If the drive can store multiple discs (a juke-box) this function -will perform disc selection. It should return the number of the -selected disc on success, a negative value on error. Currently, only -the ide-cd driver supports this functionality. - -\subsection{$Int\ get_last_session(struct\ cdrom_device_info * cdi, struct\ - cdrom_multisession * ms_info)$} - -This function should implement the old corresponding $ioctl()$. For -device $cdi\to dev$, the start of the last session of the current disc -should be returned in the pointer argument $ms_info$. Note that -routines in \cdromc\ have sanitized this argument: its requested -format will {\em always\/} be of the type $CDROM_LBA$ (linear block -addressing mode), whatever the calling software requested. But -sanitization goes even further: the low-level implementation may -return the requested information in $CDROM_MSF$ format if it wishes so -(setting the $ms_info\rightarrow addr_format$ field appropriately, of -course) and the routines in \cdromc\ will make the transformation if -necessary. The return value is 0 upon success. - -\subsection{$Int\ get_mcn(struct\ cdrom_device_info * cdi, struct\ - cdrom_mcn * mcn)$} - -Some discs carry a `Media Catalog Number' (MCN), also called -`Universal Product Code' (UPC). This number should reflect the number -that is generally found in the bar-code on the product. Unfortunately, -the few discs that carry such a number on the disc don't even use the -same format. The return argument to this function is a pointer to a -pre-declared memory region of type $struct\ cdrom_mcn$. The MCN is -expected as a 13-character string, terminated by a null-character. - -\subsection{$Int\ reset(struct\ cdrom_device_info * cdi)$} - -This call should perform a hard-reset on the drive (although in -circumstances that a hard-reset is necessary, a drive may very well not -listen to commands anymore). Preferably, control is returned to the -caller only after the drive has finished resetting. If the drive is no -longer listening, it may be wise for the underlying low-level cdrom -driver to time out. - -\subsection{$Int\ audio_ioctl(struct\ cdrom_device_info * cdi, unsigned\ - int\ cmd, void * arg)$} - -Some of the \cdrom-$ioctl$s defined in \cdromh\ can be -implemented by the routines described above, and hence the function -$cdrom_ioctl$ will use those. However, most $ioctl$s deal with -audio-control. We have decided to leave these to be accessed through a -single function, repeating the arguments $cmd$ and $arg$. Note that -the latter is of type $void*{}$, rather than $unsigned\ long\ -int$. The routine $cdrom_ioctl()$ does do some useful things, -though. It sanitizes the address format type to $CDROM_MSF$ (Minutes, -Seconds, Frames) for all audio calls. It also verifies the memory -location of $arg$, and reserves stack-memory for the argument. This -makes implementation of the $audio_ioctl()$ much simpler than in the -old driver scheme. For example, you may look up the function -$cm206_audio_ioctl()$ in {\tt {cm206.c}} that should be updated with -this documentation. - -An unimplemented ioctl should return $-ENOSYS$, but a harmless request -(\eg, $CDROMSTART$) may be ignored by returning 0 (success). Other -errors should be according to the standards, whatever they are. When -an error is returned by the low-level driver, the \UCD\ tries whenever -possible to return the error code to the calling program. (We may decide -to sanitize the return value in $cdrom_ioctl()$ though, in order to -guarantee a uniform interface to the audio-player software.) - -\subsection{$Int\ dev_ioctl(struct\ cdrom_device_info * cdi, unsigned\ int\ - cmd, unsigned\ long\ arg)$} - -Some $ioctl$s seem to be specific to certain \cdrom\ drives. That is, -they are introduced to service some capabilities of certain drives. In -fact, there are 6 different $ioctl$s for reading data, either in some -particular kind of format, or audio data. Not many drives support -reading audio tracks as data, I believe this is because of protection -of copyrights of artists. Moreover, I think that if audio-tracks are -supported, it should be done through the VFS and not via $ioctl$s. A -problem here could be the fact that audio-frames are 2352 bytes long, -so either the audio-file-system should ask for 75264 bytes at once -(the least common multiple of 512 and 2352), or the drivers should -bend their backs to cope with this incoherence (to which I would be -opposed). Furthermore, it is very difficult for the hardware to find -the exact frame boundaries, since there are no synchronization headers -in audio frames. Once these issues are resolved, this code should be -standardized in \cdromc. - -Because there are so many $ioctl$s that seem to be introduced to -satisfy certain drivers,\footnote{Is there software around that - actually uses these? I'd be interested!} any `non-standard' $ioctl$s -are routed through the call $dev_ioctl()$. In principle, `private' -$ioctl$s should be numbered after the device's major number, and not -the general \cdrom\ $ioctl$ number, {\tt {0x53}}. Currently the -non-supported $ioctl$s are: {\it CDROMREADMODE1, CDROMREADMODE2, - CDROMREADAUDIO, CDROMREADRAW, CDROMREADCOOKED, CDROMSEEK, - CDROMPLAY\-BLK and CDROM\-READALL}. - - -\subsection{\cdrom\ capabilities} -\label{capability} - -Instead of just implementing some $ioctl$ calls, the interface in -\cdromc\ supplies the possibility to indicate the {\em capabilities\/} -of a \cdrom\ drive. This can be done by ORing any number of -capability-constants that are defined in \cdromh\ at the registration -phase. Currently, the capabilities are any of: -$$ -\halign{$#$\ \hfil&$/*$ \rm# $*/$\hfil\cr -CDC_CLOSE_TRAY& can close tray by software control\cr -CDC_OPEN_TRAY& can open tray\cr -CDC_LOCK& can lock and unlock the door\cr -CDC_SELECT_SPEED& can select speed, in units of $\sim$150\,kB/s\cr -CDC_SELECT_DISC& drive is juke-box\cr -CDC_MULTI_SESSION& can read sessions $>\rm1$\cr -CDC_MCN& can read Media Catalog Number\cr -CDC_MEDIA_CHANGED& can report if disc has changed\cr -CDC_PLAY_AUDIO& can perform audio-functions (play, pause, etc)\cr -CDC_RESET& hard reset device\cr -CDC_IOCTLS& driver has non-standard ioctls\cr -CDC_DRIVE_STATUS& driver implements drive status\cr -} -$$ -The capability flag is declared $const$, to prevent drivers from -accidentally tampering with the contents. The capability fags actually -inform \cdromc\ of what the driver can do. If the drive found -by the driver does not have the capability, is can be masked out by -the $cdrom_device_info$ variable $mask$. For instance, the SCSI \cdrom\ -driver has implemented the code for loading and ejecting \cdrom's, and -hence its corresponding flags in $capability$ will be set. But a SCSI -\cdrom\ drive might be a caddy system, which can't load the tray, and -hence for this drive the $cdrom_device_info$ struct will have set -the $CDC_CLOSE_TRAY$ bit in $mask$. - -In the file \cdromc\ you will encounter many constructions of the type -$$\it -if\ (cdo\rightarrow capability \mathrel\& \mathord{\sim} cdi\rightarrow mask - \mathrel{\&} CDC_) \ldots -$$ -There is no $ioctl$ to set the mask\dots The reason is that -I think it is better to control the {\em behavior\/} rather than the -{\em capabilities}. - -\subsection{Options} - -A final flag register controls the {\em behavior\/} of the \cdrom\ -drives, in order to satisfy different users' wishes, hopefully -independently of the ideas of the respective author who happened to -have made the drive's support available to the \linux\ community. The -current behavior options are: -$$ -\halign{$#$\ \hfil&$/*$ \rm# $*/$\hfil\cr -CDO_AUTO_CLOSE& try to close tray upon device $open()$\cr -CDO_AUTO_EJECT& try to open tray on last device $close()$\cr -CDO_USE_FFLAGS& use $file_pointer\rightarrow f_flags$ to indicate - purpose for $open()$\cr -CDO_LOCK& try to lock door if device is opened\cr -CDO_CHECK_TYPE& ensure disc type is data if opened for data\cr -} -$$ - -The initial value of this register is $CDO_AUTO_CLOSE \mathrel| -CDO_USE_FFLAGS \mathrel| CDO_LOCK$, reflecting my own view on user -interface and software standards. Before you protest, there are two -new $ioctl$s implemented in \cdromc, that allow you to control the -behavior by software. These are: -$$ -\halign{$#$\ \hfil&$/*$ \rm# $*/$\hfil\cr -CDROM_SET_OPTIONS& set options specified in $(int)\ arg$\cr -CDROM_CLEAR_OPTIONS& clear options specified in $(int)\ arg$\cr -} -$$ -One option needs some more explanation: $CDO_USE_FFLAGS$. In the next -newsection we explain what the need for this option is. - -A software package {\tt setcd}, available from the Debian distribution -and {\tt sunsite.unc.edu}, allows user level control of these flags. - -\newsection{The need to know the purpose of opening the \cdrom\ device} - -Traditionally, Unix devices can be used in two different `modes', -either by reading/writing to the device file, or by issuing -controlling commands to the device, by the device's $ioctl()$ -call. The problem with \cdrom\ drives, is that they can be used for -two entirely different purposes. One is to mount removable -file systems, \cdrom s, the other is to play audio CD's. Audio commands -are implemented entirely through $ioctl$s, presumably because the -first implementation (SUN?) has been such. In principle there is -nothing wrong with this, but a good control of the `CD player' demands -that the device can {\em always\/} be opened in order to give the -$ioctl$ commands, regardless of the state the drive is in. - -On the other hand, when used as a removable-media disc drive (what the -original purpose of \cdrom s is) we would like to make sure that the -disc drive is ready for operation upon opening the device. In the old -scheme, some \cdrom\ drivers don't do any integrity checking, resulting -in a number of i/o errors reported by the VFS to the kernel when an -attempt for mounting a \cdrom\ on an empty drive occurs. This is not a -particularly elegant way to find out that there is no \cdrom\ inserted; -it more-or-less looks like the old IBM-PC trying to read an empty floppy -drive for a couple of seconds, after which the system complains it -can't read from it. Nowadays we can {\em sense\/} the existence of a -removable medium in a drive, and we believe we should exploit that -fact. An integrity check on opening of the device, that verifies the -availability of a \cdrom\ and its correct type (data), would be -desirable. - -These two ways of using a \cdrom\ drive, principally for data and -secondarily for playing audio discs, have different demands for the -behavior of the $open()$ call. Audio use simply wants to open the -device in order to get a file handle which is needed for issuing -$ioctl$ commands, while data use wants to open for correct and -reliable data transfer. The only way user programs can indicate what -their {\em purpose\/} of opening the device is, is through the $flags$ -parameter (see {\tt {open(2)}}). For \cdrom\ devices, these flags aren't -implemented (some drivers implement checking for write-related flags, -but this is not strictly necessary if the device file has correct -permission flags). Most option flags simply don't make sense to -\cdrom\ devices: $O_CREAT$, $O_NOCTTY$, $O_TRUNC$, $O_APPEND$, and -$O_SYNC$ have no meaning to a \cdrom. - -We therefore propose to use the flag $O_NONBLOCK$ to indicate -that the device is opened just for issuing $ioctl$ -commands. Strictly, the meaning of $O_NONBLOCK$ is that opening and -subsequent calls to the device don't cause the calling process to -wait. We could interpret this as ``don't wait until someone has -inserted some valid data-\cdrom.'' Thus, our proposal of the -implementation for the $open()$ call for \cdrom s is: -\begin{itemize} -\item If no other flags are set than $O_RDONLY$, the device is opened -for data transfer, and the return value will be 0 only upon successful -initialization of the transfer. The call may even induce some actions -on the \cdrom, such as closing the tray. -\item If the option flag $O_NONBLOCK$ is set, opening will always be -successful, unless the whole device doesn't exist. The drive will take -no actions whatsoever. -\end{itemize} - -\subsection{And what about standards?} - -You might hesitate to accept this proposal as it comes from the -\linux\ community, and not from some standardizing institute. What -about SUN, SGI, HP and all those other Unix and hardware vendors? -Well, these companies are in the lucky position that they generally -control both the hardware and software of their supported products, -and are large enough to set their own standard. They do not have to -deal with a dozen or more different, competing hardware -configurations.\footnote{Incidentally, I think that SUN's approach to -mounting \cdrom s is very good in origin: under Solaris a -volume-daemon automatically mounts a newly inserted \cdrom\ under {\tt -{/cdrom/$$/}}. In my opinion they should have pushed this -further and have {\em every\/} \cdrom\ on the local area network be -mounted at the similar location, \ie, no matter in which particular -machine you insert a \cdrom, it will always appear at the same -position in the directory tree, on every system. When I wanted to -implement such a user-program for \linux, I came across the -differences in behavior of the various drivers, and the need for an -$ioctl$ informing about media changes.} - -We believe that using $O_NONBLOCK$ to indicate that a device is being opened -for $ioctl$ commands only can be easily introduced in the \linux\ -community. All the CD-player authors will have to be informed, we can -even send in our own patches to the programs. The use of $O_NONBLOCK$ -has most likely no influence on the behavior of the CD-players on -other operating systems than \linux. Finally, a user can always revert -to old behavior by a call to $ioctl(file_descriptor, CDROM_CLEAR_OPTIONS, -CDO_USE_FFLAGS)$. - -\subsection{The preferred strategy of $open()$} - -The routines in \cdromc\ are designed in such a way that run-time -configuration of the behavior of \cdrom\ devices (of {\em any\/} type) -can be carried out, by the $CDROM_SET/CLEAR_OPTIONS$ $ioctls$. Thus, various -modes of operation can be set: -\begin{description} -\item[$CDO_AUTO_CLOSE \mathrel| CDO_USE_FFLAGS \mathrel| CDO_LOCK$] This -is the default setting. (With $CDO_CHECK_TYPE$ it will be better, in the -future.) If the device is not yet opened by any other process, and if -the device is being opened for data ($O_NONBLOCK$ is not set) and the -tray is found to be open, an attempt to close the tray is made. Then, -it is verified that a disc is in the drive and, if $CDO_CHECK_TYPE$ is -set, that it contains tracks of type `data mode 1.' Only if all tests -are passed is the return value zero. The door is locked to prevent file -system corruption. If the drive is opened for audio ($O_NONBLOCK$ is -set), no actions are taken and a value of 0 will be returned. -\item[$CDO_AUTO_CLOSE \mathrel| CDO_AUTO_EJECT \mathrel| CDO_LOCK$] This -mimics the behavior of the current sbpcd-driver. The option flags are -ignored, the tray is closed on the first open, if necessary. Similarly, -the tray is opened on the last release, \ie, if a \cdrom\ is unmounted, -it is automatically ejected, such that the user can replace it. -\end{description} -We hope that these option can convince everybody (both driver -maintainers and user program developers) to adopt the new \cdrom\ -driver scheme and option flag interpretation. - -\newsection{Description of routines in \cdromc} - -Only a few routines in \cdromc\ are exported to the drivers. In this -new section we will discuss these, as well as the functions that `take -over' the \cdrom\ interface to the kernel. The header file belonging -to \cdromc\ is called \cdromh. Formerly, some of the contents of this -file were placed in the file {\tt {ucdrom.h}}, but this file has now been -merged back into \cdromh. - -\subsection{$Struct\ file_operations\ cdrom_fops$} - -The contents of this structure were described in section~\ref{cdrom.c}. -A pointer to this structure is assigned to the $fops$ field -of the $struct gendisk$. - -\subsection{$Int\ register_cdrom( struct\ cdrom_device_info\ * cdi)$} - -This function is used in about the same way one registers $cdrom_fops$ -with the kernel, the device operations and information structures, -as described in section~\ref{cdrom.c}, should be registered with the -\UCD: -$$ -register_cdrom(\&_info)); -$$ -This function returns zero upon success, and non-zero upon -failure. The structure $_info$ should have a pointer to the -driver's $_dops$, as in -$$ -\vbox{\halign{&$#$\hfil\cr -struct\ &cdrom_device_info\ _info = \{\cr -& _dops;\cr -&\ldots\cr -\}\cr -}}$$ -Note that a driver must have one static structure, $_dops$, while -it may have as many structures $_info$ as there are minor devices -active. $Register_cdrom()$ builds a linked list from these. - -\subsection{$Void\ unregister_cdrom(struct\ cdrom_device_info * cdi)$} - -Unregistering device $cdi$ with minor number $MINOR(cdi\to dev)$ removes -the minor device from the list. If it was the last registered minor for -the low-level driver, this disconnects the registered device-operation -routines from the \cdrom\ interface. This function returns zero upon -success, and non-zero upon failure. - -\subsection{$Int\ cdrom_open(struct\ inode * ip, struct\ file * fp)$} - -This function is not called directly by the low-level drivers, it is -listed in the standard $cdrom_fops$. If the VFS opens a file, this -function becomes active. A strategy is implemented in this routine, -taking care of all capabilities and options that are set in the -$cdrom_device_ops$ connected to the device. Then, the program flow is -transferred to the device_dependent $open()$ call. - -\subsection{$Void\ cdrom_release(struct\ inode *ip, struct\ file -*fp)$} - -This function implements the reverse-logic of $cdrom_open()$, and then -calls the device-dependent $release()$ routine. When the use-count has -reached 0, the allocated buffers are flushed by calls to $sync_dev(dev)$ -and $invalidate_buffers(dev)$. - - -\subsection{$Int\ cdrom_ioctl(struct\ inode *ip, struct\ file *fp, -unsigned\ int\ cmd, unsigned\ long\ arg)$} -\label{cdrom-ioctl} - -This function handles all the standard $ioctl$ requests for \cdrom\ -devices in a uniform way. The different calls fall into three -categories: $ioctl$s that can be directly implemented by device -operations, ones that are routed through the call $audio_ioctl()$, and -the remaining ones, that are presumable device-dependent. Generally, a -negative return value indicates an error. - -\subsubsection{Directly implemented $ioctl$s} -\label{ioctl-direct} - -The following `old' \cdrom-$ioctl$s are implemented by directly -calling device-operations in $cdrom_device_ops$, if implemented and -not masked: -\begin{description} -\item[CDROMMULTISESSION] Requests the last session on a \cdrom. -\item[CDROMEJECT] Open tray. -\item[CDROMCLOSETRAY] Close tray. -\item[CDROMEJECT_SW] If $arg\not=0$, set behavior to auto-close (close -tray on first open) and auto-eject (eject on last release), otherwise -set behavior to non-moving on $open()$ and $release()$ calls. -\item[CDROM_GET_MCN] Get the Media Catalog Number from a CD. -\end{description} - -\subsubsection{$Ioctl$s routed through $audio_ioctl()$} -\label{ioctl-audio} - -The following set of $ioctl$s are all implemented through a call to -the $cdrom_fops$ function $audio_ioctl()$. Memory checks and -allocation are performed in $cdrom_ioctl()$, and also sanitization of -address format ($CDROM_LBA$/$CDROM_MSF$) is done. -\begin{description} -\item[CDROMSUBCHNL] Get sub-channel data in argument $arg$ of type $struct\ -cdrom_subchnl *{}$. -\item[CDROMREADTOCHDR] Read Table of Contents header, in $arg$ of type -$struct\ cdrom_tochdr *{}$. -\item[CDROMREADTOCENTRY] Read a Table of Contents entry in $arg$ and -specified by $arg$ of type $struct\ cdrom_tocentry *{}$. -\item[CDROMPLAYMSF] Play audio fragment specified in Minute, Second, -Frame format, delimited by $arg$ of type $struct\ cdrom_msf *{}$. -\item[CDROMPLAYTRKIND] Play audio fragment in track-index format -delimited by $arg$ of type $struct\ \penalty-1000 cdrom_ti *{}$. -\item[CDROMVOLCTRL] Set volume specified by $arg$ of type $struct\ -cdrom_volctrl *{}$. -\item[CDROMVOLREAD] Read volume into by $arg$ of type $struct\ -cdrom_volctrl *{}$. -\item[CDROMSTART] Spin up disc. -\item[CDROMSTOP] Stop playback of audio fragment. -\item[CDROMPAUSE] Pause playback of audio fragment. -\item[CDROMRESUME] Resume playing. -\end{description} - -\subsubsection{New $ioctl$s in \cdromc} - -The following $ioctl$s have been introduced to allow user programs to -control the behavior of individual \cdrom\ devices. New $ioctl$ -commands can be identified by the underscores in their names. -\begin{description} -\item[CDROM_SET_OPTIONS] Set options specified by $arg$. Returns the -option flag register after modification. Use $arg = \rm0$ for reading -the current flags. -\item[CDROM_CLEAR_OPTIONS] Clear options specified by $arg$. Returns - the option flag register after modification. -\item[CDROM_SELECT_SPEED] Select head-rate speed of disc specified as - by $arg$ in units of standard cdrom speed (176\,kB/sec raw data or - 150\,kB/sec file system data). The value 0 means `auto-select', \ie, - play audio discs at real time and data discs at maximum speed. The value - $arg$ is checked against the maximum head rate of the drive found in the - $cdrom_dops$. -\item[CDROM_SELECT_DISC] Select disc numbered $arg$ from a juke-box. - First disc is numbered 0. The number $arg$ is checked against the - maximum number of discs in the juke-box found in the $cdrom_dops$. -\item[CDROM_MEDIA_CHANGED] Returns 1 if a disc has been changed since - the last call. Note that calls to $cdrom_media_changed$ by the VFS - are treated by an independent queue, so both mechanisms will detect - a media change once. For juke-boxes, an extra argument $arg$ - specifies the slot for which the information is given. The special - value $CDSL_CURRENT$ requests that information about the currently - selected slot be returned. -\item[CDROM_DRIVE_STATUS] Returns the status of the drive by a call to - $drive_status()$. Return values are defined in section~\ref{drive - status}. Note that this call doesn't return information on the - current playing activity of the drive; this can be polled through an - $ioctl$ call to $CDROMSUBCHNL$. For juke-boxes, an extra argument - $arg$ specifies the slot for which (possibly limited) information is - given. The special value $CDSL_CURRENT$ requests that information - about the currently selected slot be returned. -\item[CDROM_DISC_STATUS] Returns the type of the disc currently in the - drive. It should be viewed as a complement to $CDROM_DRIVE_STATUS$. - This $ioctl$ can provide \emph {some} information about the current - disc that is inserted in the drive. This functionality used to be - implemented in the low level drivers, but is now carried out - entirely in \UCD. - - The history of development of the CD's use as a carrier medium for - various digital information has lead to many different disc types. - This $ioctl$ is useful only in the case that CDs have \emph {only - one} type of data on them. While this is often the case, it is - also very common for CDs to have some tracks with data, and some - tracks with audio. Because this is an existing interface, rather - than fixing this interface by changing the assumptions it was made - under, thereby breaking all user applications that use this - function, the \UCD\ implements this $ioctl$ as follows: If the CD in - question has audio tracks on it, and it has absolutely no CD-I, XA, - or data tracks on it, it will be reported as $CDS_AUDIO$. If it has - both audio and data tracks, it will return $CDS_MIXED$. If there - are no audio tracks on the disc, and if the CD in question has any - CD-I tracks on it, it will be reported as $CDS_XA_2_2$. Failing - that, if the CD in question has any XA tracks on it, it will be - reported as $CDS_XA_2_1$. Finally, if the CD in question has any - data tracks on it, it will be reported as a data CD ($CDS_DATA_1$). - - This $ioctl$ can return: - $$ - \halign{$#$\ \hfil&$/*$ \rm# $*/$\hfil\cr - CDS_NO_INFO& no information available\cr - CDS_NO_DISC& no disc is inserted, or tray is opened\cr - CDS_AUDIO& Audio disc (2352 audio bytes/frame)\cr - CDS_DATA_1& data disc, mode 1 (2048 user bytes/frame)\cr - CDS_XA_2_1& mixed data (XA), mode 2, form 1 (2048 user bytes)\cr - CDS_XA_2_2& mixed data (XA), mode 2, form 1 (2324 user bytes)\cr - CDS_MIXED& mixed audio/data disc\cr - } - $$ - For some information concerning frame layout of the various disc - types, see a recent version of \cdromh. - -\item[CDROM_CHANGER_NSLOTS] Returns the number of slots in a - juke-box. -\item[CDROMRESET] Reset the drive. -\item[CDROM_GET_CAPABILITY] Returns the $capability$ flags for the - drive. Refer to section \ref{capability} for more information on - these flags. -\item[CDROM_LOCKDOOR] Locks the door of the drive. $arg == \rm0$ - unlocks the door, any other value locks it. -\item[CDROM_DEBUG] Turns on debugging info. Only root is allowed - to do this. Same semantics as CDROM_LOCKDOOR. -\end{description} - -\subsubsection{Device dependent $ioctl$s} - -Finally, all other $ioctl$s are passed to the function $dev_ioctl()$, -if implemented. No memory allocation or verification is carried out. - -\newsection{How to update your driver} - -\begin{enumerate} -\item Make a backup of your current driver. -\item Get hold of the files \cdromc\ and \cdromh, they should be in - the directory tree that came with this documentation. -\item Make sure you include \cdromh. -\item Change the 3rd argument of $register_blkdev$ from -$\&_fops$ to $\&cdrom_fops$. -\item Just after that line, add the following to register with the \UCD: - $$register_cdrom(\&_info);$$ - Similarly, add a call to $unregister_cdrom()$ at the appropriate place. -\item Copy an example of the device-operations $struct$ to your - source, \eg, from {\tt {cm206.c}} $cm206_dops$, and change all - entries to names corresponding to your driver, or names you just - happen to like. If your driver doesn't support a certain function, - make the entry $NULL$. At the entry $capability$ you should list all - capabilities your driver currently supports. If your driver - has a capability that is not listed, please send me a message. -\item Copy the $cdrom_device_info$ declaration from the same example - driver, and modify the entries according to your needs. If your - driver dynamically determines the capabilities of the hardware, this - structure should also be declared dynamically. -\item Implement all functions in your $_dops$ structure, - according to prototypes listed in \cdromh, and specifications given - in section~\ref{cdrom.c}. Most likely you have already implemented - the code in a large part, and you will almost certainly need to adapt the - prototype and return values. -\item Rename your $_ioctl()$ function to $audio_ioctl$ and - change the prototype a little. Remove entries listed in the first - part in section~\ref{cdrom-ioctl}, if your code was OK, these are - just calls to the routines you adapted in the previous step. -\item You may remove all remaining memory checking code in the - $audio_ioctl()$ function that deals with audio commands (these are - listed in the second part of section~\ref{cdrom-ioctl}). There is no - need for memory allocation either, so most $case$s in the $switch$ - statement look similar to: - $$ - case\ CDROMREADTOCENTRY\colon get_toc_entry\bigl((struct\ - cdrom_tocentry *{})\ arg\bigr); - $$ -\item All remaining $ioctl$ cases must be moved to a separate - function, $_ioctl$, the device-dependent $ioctl$s. Note that - memory checking and allocation must be kept in this code! -\item Change the prototypes of $_open()$ and - $_release()$, and remove any strategic code (\ie, tray - movement, door locking, etc.). -\item Try to recompile the drivers. We advise you to use modules, both - for {\tt {cdrom.o}} and your driver, as debugging is much easier this - way. -\end{enumerate} - -\newsection{Thanks} - -Thanks to all the people involved. First, Erik Andersen, who has -taken over the torch in maintaining \cdromc\ and integrating much -\cdrom-related code in the 2.1-kernel. Thanks to Scott Snyder and -Gerd Knorr, who were the first to implement this interface for SCSI -and IDE-CD drivers and added many ideas for extension of the data -structures relative to kernel~2.0. Further thanks to Heiko Ei{\ss}feldt, -Thomas Quinot, Jon Tombs, Ken Pizzini, Eberhard M\"onkeberg and Andrew -Kroll, the \linux\ \cdrom\ device driver developers who were kind -enough to give suggestions and criticisms during the writing. Finally -of course, I want to thank Linus Torvalds for making this possible in -the first place. - -\vfill -$ \version\ $ -\eject -\end{document} diff --git a/Documentation/cdrom/cdrom-standard.txt b/Documentation/cdrom/cdrom-standard.txt new file mode 100644 index 000000000000..dde4f7f7fdbf --- /dev/null +++ b/Documentation/cdrom/cdrom-standard.txt @@ -0,0 +1,1063 @@ +======================= +A Linux CD-ROM standard +======================= + +:Author: David van Leeuwen +:Date: 12 March 1999 +:Updated by: Erik Andersen (andersee@debian.org) +:Updated by: Jens Axboe (axboe@image.dk) + + +Introduction +============ + +Linux is probably the Unix-like operating system that supports +the widest variety of hardware devices. The reasons for this are +presumably + +- The large list of hardware devices available for the many platforms + that Linux now supports (i.e., i386-PCs, Sparc Suns, etc.) +- The open design of the operating system, such that anybody can write a + driver for Linux. +- There is plenty of source code around as examples of how to write a driver. + +The openness of Linux, and the many different types of available +hardware has allowed Linux to support many different hardware devices. +Unfortunately, the very openness that has allowed Linux to support +all these different devices has also allowed the behavior of each +device driver to differ significantly from one device to another. +This divergence of behavior has been very significant for CD-ROM +devices; the way a particular drive reacts to a `standard` *ioctl()* +call varies greatly from one device driver to another. To avoid making +their drivers totally inconsistent, the writers of Linux CD-ROM +drivers generally created new device drivers by understanding, copying, +and then changing an existing one. Unfortunately, this practice did not +maintain uniform behavior across all the Linux CD-ROM drivers. + +This document describes an effort to establish Uniform behavior across +all the different CD-ROM device drivers for Linux. This document also +defines the various *ioctl()'s*, and how the low-level CD-ROM device +drivers should implement them. Currently (as of the Linux 2.1.\ *x* +development kernels) several low-level CD-ROM device drivers, including +both IDE/ATAPI and SCSI, now use this Uniform interface. + +When the CD-ROM was developed, the interface between the CD-ROM drive +and the computer was not specified in the standards. As a result, many +different CD-ROM interfaces were developed. Some of them had their +own proprietary design (Sony, Mitsumi, Panasonic, Philips), other +manufacturers adopted an existing electrical interface and changed +the functionality (CreativeLabs/SoundBlaster, Teac, Funai) or simply +adapted their drives to one or more of the already existing electrical +interfaces (Aztech, Sanyo, Funai, Vertos, Longshine, Optics Storage and +most of the `NoName` manufacturers). In cases where a new drive really +brought its own interface or used its own command set and flow control +scheme, either a separate driver had to be written, or an existing +driver had to be enhanced. History has delivered us CD-ROM support for +many of these different interfaces. Nowadays, almost all new CD-ROM +drives are either IDE/ATAPI or SCSI, and it is very unlikely that any +manufacturer will create a new interface. Even finding drives for the +old proprietary interfaces is getting difficult. + +When (in the 1.3.70's) I looked at the existing software interface, +which was expressed through `cdrom.h`, it appeared to be a rather wild +set of commands and data formats [#f1]_. It seemed that many +features of the software interface had been added to accommodate the +capabilities of a particular drive, in an *ad hoc* manner. More +importantly, it appeared that the behavior of the `standard` commands +was different for most of the different drivers: e. g., some drivers +close the tray if an *open()* call occurs when the tray is open, while +others do not. Some drivers lock the door upon opening the device, to +prevent an incoherent file system, but others don't, to allow software +ejection. Undoubtedly, the capabilities of the different drives vary, +but even when two drives have the same capability their drivers' +behavior was usually different. + +.. [#f1] + I cannot recollect what kernel version I looked at, then, + presumably 1.2.13 and 1.3.34 --- the latest kernel that I was + indirectly involved in. + +I decided to start a discussion on how to make all the Linux CD-ROM +drivers behave more uniformly. I began by contacting the developers of +the many CD-ROM drivers found in the Linux kernel. Their reactions +encouraged me to write the Uniform CD-ROM Driver which this document is +intended to describe. The implementation of the Uniform CD-ROM Driver is +in the file `cdrom.c`. This driver is intended to be an additional software +layer that sits on top of the low-level device drivers for each CD-ROM drive. +By adding this additional layer, it is possible to have all the different +CD-ROM devices behave **exactly** the same (insofar as the underlying +hardware will allow). + +The goal of the Uniform CD-ROM Driver is **not** to alienate driver developers +whohave not yet taken steps to support this effort. The goal of Uniform CD-ROM +Driver is simply to give people writing application programs for CD-ROM drives +**one** Linux CD-ROM interface with consistent behavior for all +CD-ROM devices. In addition, this also provides a consistent interface +between the low-level device driver code and the Linux kernel. Care +is taken that 100% compatibility exists with the data structures and +programmer's interface defined in `cdrom.h`. This guide was written to +help CD-ROM driver developers adapt their code to use the Uniform CD-ROM +Driver code defined in `cdrom.c`. + +Personally, I think that the most important hardware interfaces are +the IDE/ATAPI drives and, of course, the SCSI drives, but as prices +of hardware drop continuously, it is also likely that people may have +more than one CD-ROM drive, possibly of mixed types. It is important +that these drives behave in the same way. In December 1994, one of the +cheapest CD-ROM drives was a Philips cm206, a double-speed proprietary +drive. In the months that I was busy writing a Linux driver for it, +proprietary drives became obsolete and IDE/ATAPI drives became the +standard. At the time of the last update to this document (November +1997) it is becoming difficult to even **find** anything less than a +16 speed CD-ROM drive, and 24 speed drives are common. + +.. _cdrom_api: + +Standardizing through another software level +============================================ + +At the time this document was conceived, all drivers directly +implemented the CD-ROM *ioctl()* calls through their own routines. This +led to the danger of different drivers forgetting to do important things +like checking that the user was giving the driver valid data. More +importantly, this led to the divergence of behavior, which has already +been discussed. + +For this reason, the Uniform CD-ROM Driver was created to enforce consistent +CD-ROM drive behavior, and to provide a common set of services to the various +low-level CD-ROM device drivers. The Uniform CD-ROM Driver now provides another +software-level, that separates the *ioctl()* and *open()* implementation +from the actual hardware implementation. Note that this effort has +made few changes which will affect a user's application programs. The +greatest change involved moving the contents of the various low-level +CD-ROM drivers\' header files to the kernel's cdrom directory. This was +done to help ensure that the user is only presented with only one cdrom +interface, the interface defined in `cdrom.h`. + +CD-ROM drives are specific enough (i. e., different from other +block-devices such as floppy or hard disc drives), to define a set +of common **CD-ROM device operations**, *_dops*. +These operations are different from the classical block-device file +operations, *_fops*. + +The routines for the Uniform CD-ROM Driver interface level are implemented +in the file `cdrom.c`. In this file, the Uniform CD-ROM Driver interfaces +with the kernel as a block device by registering the following general +*struct file_operations*:: + + struct file_operations cdrom_fops = { + NULL, /∗ lseek ∗/ + block _read , /∗ read—general block-dev read ∗/ + block _write, /∗ write—general block-dev write ∗/ + NULL, /∗ readdir ∗/ + NULL, /∗ select ∗/ + cdrom_ioctl, /∗ ioctl ∗/ + NULL, /∗ mmap ∗/ + cdrom_open, /∗ open ∗/ + cdrom_release, /∗ release ∗/ + NULL, /∗ fsync ∗/ + NULL, /∗ fasync ∗/ + cdrom_media_changed, /∗ media change ∗/ + NULL /∗ revalidate ∗/ + }; + +Every active CD-ROM device shares this *struct*. The routines +declared above are all implemented in `cdrom.c`, since this file is the +place where the behavior of all CD-ROM-devices is defined and +standardized. The actual interface to the various types of CD-ROM +hardware is still performed by various low-level CD-ROM-device +drivers. These routines simply implement certain **capabilities** +that are common to all CD-ROM (and really, all removable-media +devices). + +Registration of a low-level CD-ROM device driver is now done through +the general routines in `cdrom.c`, not through the Virtual File System +(VFS) any more. The interface implemented in `cdrom.c` is carried out +through two general structures that contain information about the +capabilities of the driver, and the specific drives on which the +driver operates. The structures are: + +cdrom_device_ops + This structure contains information about the low-level driver for a + CD-ROM device. This structure is conceptually connected to the major + number of the device (although some drivers may have different + major numbers, as is the case for the IDE driver). + +cdrom_device_info + This structure contains information about a particular CD-ROM drive, + such as its device name, speed, etc. This structure is conceptually + connected to the minor number of the device. + +Registering a particular CD-ROM drive with the Uniform CD-ROM Driver +is done by the low-level device driver though a call to:: + + register_cdrom(struct cdrom_device_info * _info) + +The device information structure, *_info*, contains all the +information needed for the kernel to interface with the low-level +CD-ROM device driver. One of the most important entries in this +structure is a pointer to the *cdrom_device_ops* structure of the +low-level driver. + +The device operations structure, *cdrom_device_ops*, contains a list +of pointers to the functions which are implemented in the low-level +device driver. When `cdrom.c` accesses a CD-ROM device, it does it +through the functions in this structure. It is impossible to know all +the capabilities of future CD-ROM drives, so it is expected that this +list may need to be expanded from time to time as new technologies are +developed. For example, CD-R and CD-R/W drives are beginning to become +popular, and support will soon need to be added for them. For now, the +current *struct* is:: + + struct cdrom_device_ops { + int (*open)(struct cdrom_device_info *, int) + void (*release)(struct cdrom_device_info *); + int (*drive_status)(struct cdrom_device_info *, int); + unsigned int (*check_events)(struct cdrom_device_info *, + unsigned int, int); + int (*media_changed)(struct cdrom_device_info *, int); + int (*tray_move)(struct cdrom_device_info *, int); + int (*lock_door)(struct cdrom_device_info *, int); + int (*select_speed)(struct cdrom_device_info *, int); + int (*select_disc)(struct cdrom_device_info *, int); + int (*get_last_session) (struct cdrom_device_info *, + struct cdrom_multisession *); + int (*get_mcn)(struct cdrom_device_info *, struct cdrom_mcn *); + int (*reset)(struct cdrom_device_info *); + int (*audio_ioctl)(struct cdrom_device_info *, + unsigned int, void *); + const int capability; /* capability flags */ + int (*generic_packet)(struct cdrom_device_info *, + struct packet_command *); + }; + +When a low-level device driver implements one of these capabilities, +it should add a function pointer to this *struct*. When a particular +function is not implemented, however, this *struct* should contain a +NULL instead. The *capability* flags specify the capabilities of the +CD-ROM hardware and/or low-level CD-ROM driver when a CD-ROM drive +is registered with the Uniform CD-ROM Driver. + +Note that most functions have fewer parameters than their +*blkdev_fops* counterparts. This is because very little of the +information in the structures *inode* and *file* is used. For most +drivers, the main parameter is the *struct* *cdrom_device_info*, from +which the major and minor number can be extracted. (Most low-level +CD-ROM drivers don't even look at the major and minor number though, +since many of them only support one device.) This will be available +through *dev* in *cdrom_device_info* described below. + +The drive-specific, minor-like information that is registered with +`cdrom.c`, currently contains the following fields:: + + struct cdrom_device_info { + const struct cdrom_device_ops * ops; /* device operations for this major */ + struct list_head list; /* linked list of all device_info */ + struct gendisk * disk; /* matching block layer disk */ + void * handle; /* driver-dependent data */ + + int mask; /* mask of capability: disables them */ + int speed; /* maximum speed for reading data */ + int capacity; /* number of discs in a jukebox */ + + unsigned int options:30; /* options flags */ + unsigned mc_flags:2; /* media-change buffer flags */ + unsigned int vfs_events; /* cached events for vfs path */ + unsigned int ioctl_events; /* cached events for ioctl path */ + int use_count; /* number of times device is opened */ + char name[20]; /* name of the device type */ + + __u8 sanyo_slot : 2; /* Sanyo 3-CD changer support */ + __u8 keeplocked : 1; /* CDROM_LOCKDOOR status */ + __u8 reserved : 5; /* not used yet */ + int cdda_method; /* see CDDA_* flags */ + __u8 last_sense; /* saves last sense key */ + __u8 media_written; /* dirty flag, DVD+RW bookkeeping */ + unsigned short mmc3_profile; /* current MMC3 profile */ + int for_data; /* unknown:TBD */ + int (*exit)(struct cdrom_device_info *);/* unknown:TBD */ + int mrw_mode_page; /* which MRW mode page is in use */ + }; + +Using this *struct*, a linked list of the registered minor devices is +built, using the *next* field. The device number, the device operations +struct and specifications of properties of the drive are stored in this +structure. + +The *mask* flags can be used to mask out some of the capabilities listed +in *ops->capability*, if a specific drive doesn't support a feature +of the driver. The value *speed* specifies the maximum head-rate of the +drive, measured in units of normal audio speed (176kB/sec raw data or +150kB/sec file system data). The parameters are declared *const* +because they describe properties of the drive, which don't change after +registration. + +A few registers contain variables local to the CD-ROM drive. The +flags *options* are used to specify how the general CD-ROM routines +should behave. These various flags registers should provide enough +flexibility to adapt to the different users' wishes (and **not** the +`arbitrary` wishes of the author of the low-level device driver, as is +the case in the old scheme). The register *mc_flags* is used to buffer +the information from *media_changed()* to two separate queues. Other +data that is specific to a minor drive, can be accessed through *handle*, +which can point to a data structure specific to the low-level driver. +The fields *use_count*, *next*, *options* and *mc_flags* need not be +initialized. + +The intermediate software layer that `cdrom.c` forms will perform some +additional bookkeeping. The use count of the device (the number of +processes that have the device opened) is registered in *use_count*. The +function *cdrom_ioctl()* will verify the appropriate user-memory regions +for read and write, and in case a location on the CD is transferred, +it will `sanitize` the format by making requests to the low-level +drivers in a standard format, and translating all formats between the +user-software and low level drivers. This relieves much of the drivers' +memory checking and format checking and translation. Also, the necessary +structures will be declared on the program stack. + +The implementation of the functions should be as defined in the +following sections. Two functions **must** be implemented, namely +*open()* and *release()*. Other functions may be omitted, their +corresponding capability flags will be cleared upon registration. +Generally, a function returns zero on success and negative on error. A +function call should return only after the command has completed, but of +course waiting for the device should not use processor time. + +:: + + int open(struct cdrom_device_info *cdi, int purpose) + +*Open()* should try to open the device for a specific *purpose*, which +can be either: + +- Open for reading data, as done by `mount()` (2), or the + user commands `dd` or `cat`. +- Open for *ioctl* commands, as done by audio-CD playing programs. + +Notice that any strategic code (closing tray upon *open()*, etc.) is +done by the calling routine in `cdrom.c`, so the low-level routine +should only be concerned with proper initialization, such as spinning +up the disc, etc. + +:: + + void release(struct cdrom_device_info *cdi) + +Device-specific actions should be taken such as spinning down the device. +However, strategic actions such as ejection of the tray, or unlocking +the door, should be left over to the general routine *cdrom_release()*. +This is the only function returning type *void*. + +.. _cdrom_drive_status: + +:: + + int drive_status(struct cdrom_device_info *cdi, int slot_nr) + +The function *drive_status*, if implemented, should provide +information on the status of the drive (not the status of the disc, +which may or may not be in the drive). If the drive is not a changer, +*slot_nr* should be ignored. In `cdrom.h` the possibilities are listed:: + + + CDS_NO_INFO /* no information available */ + CDS_NO_DISC /* no disc is inserted, tray is closed */ + CDS_TRAY_OPEN /* tray is opened */ + CDS_DRIVE_NOT_READY /* something is wrong, tray is moving? */ + CDS_DISC_OK /* a disc is loaded and everything is fine */ + +:: + + int media_changed(struct cdrom_device_info *cdi, int disc_nr) + +This function is very similar to the original function in $struct +file_operations*. It returns 1 if the medium of the device *cdi->dev* +has changed since the last call, and 0 otherwise. The parameter +*disc_nr* identifies a specific slot in a juke-box, it should be +ignored for single-disc drives. Note that by `re-routing` this +function through *cdrom_media_changed()*, we can implement separate +queues for the VFS and a new *ioctl()* function that can report device +changes to software (e. g., an auto-mounting daemon). + +:: + + int tray_move(struct cdrom_device_info *cdi, int position) + +This function, if implemented, should control the tray movement. (No +other function should control this.) The parameter *position* controls +the desired direction of movement: + +- 0 Close tray +- 1 Open tray + +This function returns 0 upon success, and a non-zero value upon +error. Note that if the tray is already in the desired position, no +action need be taken, and the return value should be 0. + +:: + + int lock_door(struct cdrom_device_info *cdi, int lock) + +This function (and no other code) controls locking of the door, if the +drive allows this. The value of *lock* controls the desired locking +state: + +- 0 Unlock door, manual opening is allowed +- 1 Lock door, tray cannot be ejected manually + +This function returns 0 upon success, and a non-zero value upon +error. Note that if the door is already in the requested state, no +action need be taken, and the return value should be 0. + +:: + + int select_speed(struct cdrom_device_info *cdi, int speed) + +Some CD-ROM drives are capable of changing their head-speed. There +are several reasons for changing the speed of a CD-ROM drive. Badly +pressed CD-ROM s may benefit from less-than-maximum head rate. Modern +CD-ROM drives can obtain very high head rates (up to *24x* is +common). It has been reported that these drives can make reading +errors at these high speeds, reducing the speed can prevent data loss +in these circumstances. Finally, some of these drives can +make an annoyingly loud noise, which a lower speed may reduce. + +This function specifies the speed at which data is read or audio is +played back. The value of *speed* specifies the head-speed of the +drive, measured in units of standard cdrom speed (176kB/sec raw data +or 150kB/sec file system data). So to request that a CD-ROM drive +operate at 300kB/sec you would call the CDROM_SELECT_SPEED *ioctl* +with *speed=2*. The special value `0` means `auto-selection`, i. e., +maximum data-rate or real-time audio rate. If the drive doesn't have +this `auto-selection` capability, the decision should be made on the +current disc loaded and the return value should be positive. A negative +return value indicates an error. + +:: + + int select_disc(struct cdrom_device_info *cdi, int number) + +If the drive can store multiple discs (a juke-box) this function +will perform disc selection. It should return the number of the +selected disc on success, a negative value on error. Currently, only +the ide-cd driver supports this functionality. + +:: + + int get_last_session(struct cdrom_device_info *cdi, + struct cdrom_multisession *ms_info) + +This function should implement the old corresponding *ioctl()*. For +device *cdi->dev*, the start of the last session of the current disc +should be returned in the pointer argument *ms_info*. Note that +routines in `cdrom.c` have sanitized this argument: its requested +format will **always** be of the type *CDROM_LBA* (linear block +addressing mode), whatever the calling software requested. But +sanitization goes even further: the low-level implementation may +return the requested information in *CDROM_MSF* format if it wishes so +(setting the *ms_info->addr_format* field appropriately, of +course) and the routines in `cdrom.c` will make the transformation if +necessary. The return value is 0 upon success. + +:: + + int get_mcn(struct cdrom_device_info *cdi, + struct cdrom_mcn *mcn) + +Some discs carry a `Media Catalog Number` (MCN), also called +`Universal Product Code` (UPC). This number should reflect the number +that is generally found in the bar-code on the product. Unfortunately, +the few discs that carry such a number on the disc don't even use the +same format. The return argument to this function is a pointer to a +pre-declared memory region of type *struct cdrom_mcn*. The MCN is +expected as a 13-character string, terminated by a null-character. + +:: + + int reset(struct cdrom_device_info *cdi) + +This call should perform a hard-reset on the drive (although in +circumstances that a hard-reset is necessary, a drive may very well not +listen to commands anymore). Preferably, control is returned to the +caller only after the drive has finished resetting. If the drive is no +longer listening, it may be wise for the underlying low-level cdrom +driver to time out. + +:: + + int audio_ioctl(struct cdrom_device_info *cdi, + unsigned int cmd, void *arg) + +Some of the CD-ROM-\ *ioctl()*\ 's defined in `cdrom.h` can be +implemented by the routines described above, and hence the function +*cdrom_ioctl* will use those. However, most *ioctl()*\ 's deal with +audio-control. We have decided to leave these to be accessed through a +single function, repeating the arguments *cmd* and *arg*. Note that +the latter is of type *void*, rather than *unsigned long int*. +The routine *cdrom_ioctl()* does do some useful things, +though. It sanitizes the address format type to *CDROM_MSF* (Minutes, +Seconds, Frames) for all audio calls. It also verifies the memory +location of *arg*, and reserves stack-memory for the argument. This +makes implementation of the *audio_ioctl()* much simpler than in the +old driver scheme. For example, you may look up the function +*cm206_audio_ioctl()* `cm206.c` that should be updated with +this documentation. + +An unimplemented ioctl should return *-ENOSYS*, but a harmless request +(e. g., *CDROMSTART*) may be ignored by returning 0 (success). Other +errors should be according to the standards, whatever they are. When +an error is returned by the low-level driver, the Uniform CD-ROM Driver +tries whenever possible to return the error code to the calling program. +(We may decide to sanitize the return value in *cdrom_ioctl()* though, in +order to guarantee a uniform interface to the audio-player software.) + +:: + + int dev_ioctl(struct cdrom_device_info *cdi, + unsigned int cmd, unsigned long arg) + +Some *ioctl()'s* seem to be specific to certain CD-ROM drives. That is, +they are introduced to service some capabilities of certain drives. In +fact, there are 6 different *ioctl()'s* for reading data, either in some +particular kind of format, or audio data. Not many drives support +reading audio tracks as data, I believe this is because of protection +of copyrights of artists. Moreover, I think that if audio-tracks are +supported, it should be done through the VFS and not via *ioctl()'s*. A +problem here could be the fact that audio-frames are 2352 bytes long, +so either the audio-file-system should ask for 75264 bytes at once +(the least common multiple of 512 and 2352), or the drivers should +bend their backs to cope with this incoherence (to which I would be +opposed). Furthermore, it is very difficult for the hardware to find +the exact frame boundaries, since there are no synchronization headers +in audio frames. Once these issues are resolved, this code should be +standardized in `cdrom.c`. + +Because there are so many *ioctl()'s* that seem to be introduced to +satisfy certain drivers [#f2]_, any non-standard *ioctl()*\ s +are routed through the call *dev_ioctl()*. In principle, `private` +*ioctl()*\ 's should be numbered after the device's major number, and not +the general CD-ROM *ioctl* number, `0x53`. Currently the +non-supported *ioctl()'s* are: + + CDROMREADMODE1, CDROMREADMODE2, CDROMREADAUDIO, CDROMREADRAW, + CDROMREADCOOKED, CDROMSEEK, CDROMPLAY-BLK and CDROM-READALL + +.. [#f2] + + Is there software around that actually uses these? I'd be interested! + +.. _cdrom_capabilities: + +CD-ROM capabilities +------------------- + +Instead of just implementing some *ioctl* calls, the interface in +`cdrom.c` supplies the possibility to indicate the **capabilities** +of a CD-ROM drive. This can be done by ORing any number of +capability-constants that are defined in `cdrom.h` at the registration +phase. Currently, the capabilities are any of:: + + CDC_CLOSE_TRAY /* can close tray by software control */ + CDC_OPEN_TRAY /* can open tray */ + CDC_LOCK /* can lock and unlock the door */ + CDC_SELECT_SPEED /* can select speed, in units of * sim*150 ,kB/s */ + CDC_SELECT_DISC /* drive is juke-box */ + CDC_MULTI_SESSION /* can read sessions *> rm1* */ + CDC_MCN /* can read Media Catalog Number */ + CDC_MEDIA_CHANGED /* can report if disc has changed */ + CDC_PLAY_AUDIO /* can perform audio-functions (play, pause, etc) */ + CDC_RESET /* hard reset device */ + CDC_IOCTLS /* driver has non-standard ioctls */ + CDC_DRIVE_STATUS /* driver implements drive status */ + +The capability flag is declared *const*, to prevent drivers from +accidentally tampering with the contents. The capability fags actually +inform `cdrom.c` of what the driver can do. If the drive found +by the driver does not have the capability, is can be masked out by +the *cdrom_device_info* variable *mask*. For instance, the SCSI CD-ROM +driver has implemented the code for loading and ejecting CD-ROM's, and +hence its corresponding flags in *capability* will be set. But a SCSI +CD-ROM drive might be a caddy system, which can't load the tray, and +hence for this drive the *cdrom_device_info* struct will have set +the *CDC_CLOSE_TRAY* bit in *mask*. + +In the file `cdrom.c` you will encounter many constructions of the type:: + + if (cdo->capability & ∼cdi->mask & CDC _⟨capability⟩) ... + +There is no *ioctl* to set the mask... The reason is that +I think it is better to control the **behavior** rather than the +**capabilities**. + +Options +------- + +A final flag register controls the **behavior** of the CD-ROM +drives, in order to satisfy different users' wishes, hopefully +independently of the ideas of the respective author who happened to +have made the drive's support available to the Linux community. The +current behavior options are:: + + CDO_AUTO_CLOSE /* try to close tray upon device open() */ + CDO_AUTO_EJECT /* try to open tray on last device close() */ + CDO_USE_FFLAGS /* use file_pointer->f_flags to indicate purpose for open() */ + CDO_LOCK /* try to lock door if device is opened */ + CDO_CHECK_TYPE /* ensure disc type is data if opened for data */ + +The initial value of this register is +`CDO_AUTO_CLOSE | CDO_USE_FFLAGS | CDO_LOCK`, reflecting my own view on user +interface and software standards. Before you protest, there are two +new *ioctl()'s* implemented in `cdrom.c`, that allow you to control the +behavior by software. These are:: + + CDROM_SET_OPTIONS /* set options specified in (int)arg */ + CDROM_CLEAR_OPTIONS /* clear options specified in (int)arg */ + +One option needs some more explanation: *CDO_USE_FFLAGS*. In the next +newsection we explain what the need for this option is. + +A software package `setcd`, available from the Debian distribution +and `sunsite.unc.edu`, allows user level control of these flags. + + +The need to know the purpose of opening the CD-ROM device +========================================================= + +Traditionally, Unix devices can be used in two different `modes`, +either by reading/writing to the device file, or by issuing +controlling commands to the device, by the device's *ioctl()* +call. The problem with CD-ROM drives, is that they can be used for +two entirely different purposes. One is to mount removable +file systems, CD-ROM's, the other is to play audio CD's. Audio commands +are implemented entirely through *ioctl()\'s*, presumably because the +first implementation (SUN?) has been such. In principle there is +nothing wrong with this, but a good control of the `CD player` demands +that the device can **always** be opened in order to give the +*ioctl* commands, regardless of the state the drive is in. + +On the other hand, when used as a removable-media disc drive (what the +original purpose of CD-ROM s is) we would like to make sure that the +disc drive is ready for operation upon opening the device. In the old +scheme, some CD-ROM drivers don't do any integrity checking, resulting +in a number of i/o errors reported by the VFS to the kernel when an +attempt for mounting a CD-ROM on an empty drive occurs. This is not a +particularly elegant way to find out that there is no CD-ROM inserted; +it more-or-less looks like the old IBM-PC trying to read an empty floppy +drive for a couple of seconds, after which the system complains it +can't read from it. Nowadays we can **sense** the existence of a +removable medium in a drive, and we believe we should exploit that +fact. An integrity check on opening of the device, that verifies the +availability of a CD-ROM and its correct type (data), would be +desirable. + +These two ways of using a CD-ROM drive, principally for data and +secondarily for playing audio discs, have different demands for the +behavior of the *open()* call. Audio use simply wants to open the +device in order to get a file handle which is needed for issuing +*ioctl* commands, while data use wants to open for correct and +reliable data transfer. The only way user programs can indicate what +their *purpose* of opening the device is, is through the *flags* +parameter (see `open(2)`). For CD-ROM devices, these flags aren't +implemented (some drivers implement checking for write-related flags, +but this is not strictly necessary if the device file has correct +permission flags). Most option flags simply don't make sense to +CD-ROM devices: *O_CREAT*, *O_NOCTTY*, *O_TRUNC*, *O_APPEND*, and +*O_SYNC* have no meaning to a CD-ROM. + +We therefore propose to use the flag *O_NONBLOCK* to indicate +that the device is opened just for issuing *ioctl* +commands. Strictly, the meaning of *O_NONBLOCK* is that opening and +subsequent calls to the device don't cause the calling process to +wait. We could interpret this as don't wait until someone has +inserted some valid data-CD-ROM. Thus, our proposal of the +implementation for the *open()* call for CD-ROM s is: + +- If no other flags are set than *O_RDONLY*, the device is opened + for data transfer, and the return value will be 0 only upon successful + initialization of the transfer. The call may even induce some actions + on the CD-ROM, such as closing the tray. +- If the option flag *O_NONBLOCK* is set, opening will always be + successful, unless the whole device doesn't exist. The drive will take + no actions whatsoever. + +And what about standards? +------------------------- + +You might hesitate to accept this proposal as it comes from the +Linux community, and not from some standardizing institute. What +about SUN, SGI, HP and all those other Unix and hardware vendors? +Well, these companies are in the lucky position that they generally +control both the hardware and software of their supported products, +and are large enough to set their own standard. They do not have to +deal with a dozen or more different, competing hardware +configurations\ [#f3]_. + +.. [#f3] + + Incidentally, I think that SUN's approach to mounting CD-ROM s is very + good in origin: under Solaris a volume-daemon automatically mounts a + newly inserted CD-ROM under `/cdrom/**`. + + In my opinion they should have pushed this + further and have **every** CD-ROM on the local area network be + mounted at the similar location, i. e., no matter in which particular + machine you insert a CD-ROM, it will always appear at the same + position in the directory tree, on every system. When I wanted to + implement such a user-program for Linux, I came across the + differences in behavior of the various drivers, and the need for an + *ioctl* informing about media changes. + +We believe that using *O_NONBLOCK* to indicate that a device is being opened +for *ioctl* commands only can be easily introduced in the Linux +community. All the CD-player authors will have to be informed, we can +even send in our own patches to the programs. The use of *O_NONBLOCK* +has most likely no influence on the behavior of the CD-players on +other operating systems than Linux. Finally, a user can always revert +to old behavior by a call to +*ioctl(file_descriptor, CDROM_CLEAR_OPTIONS, CDO_USE_FFLAGS)*. + +The preferred strategy of *open()* +---------------------------------- + +The routines in `cdrom.c` are designed in such a way that run-time +configuration of the behavior of CD-ROM devices (of **any** type) +can be carried out, by the *CDROM_SET/CLEAR_OPTIONS* *ioctls*. Thus, various +modes of operation can be set: + +`CDO_AUTO_CLOSE | CDO_USE_FFLAGS | CDO_LOCK` + This is the default setting. (With *CDO_CHECK_TYPE* it will be better, in + the future.) If the device is not yet opened by any other process, and if + the device is being opened for data (*O_NONBLOCK* is not set) and the + tray is found to be open, an attempt to close the tray is made. Then, + it is verified that a disc is in the drive and, if *CDO_CHECK_TYPE* is + set, that it contains tracks of type `data mode 1`. Only if all tests + are passed is the return value zero. The door is locked to prevent file + system corruption. If the drive is opened for audio (*O_NONBLOCK* is + set), no actions are taken and a value of 0 will be returned. + +`CDO_AUTO_CLOSE | CDO_AUTO_EJECT | CDO_LOCK` + This mimics the behavior of the current sbpcd-driver. The option flags are + ignored, the tray is closed on the first open, if necessary. Similarly, + the tray is opened on the last release, i. e., if a CD-ROM is unmounted, + it is automatically ejected, such that the user can replace it. + +We hope that these option can convince everybody (both driver +maintainers and user program developers) to adopt the new CD-ROM +driver scheme and option flag interpretation. + +Description of routines in `cdrom.c` +==================================== + +Only a few routines in `cdrom.c` are exported to the drivers. In this +new section we will discuss these, as well as the functions that `take +over' the CD-ROM interface to the kernel. The header file belonging +to `cdrom.c` is called `cdrom.h`. Formerly, some of the contents of this +file were placed in the file `ucdrom.h`, but this file has now been +merged back into `cdrom.h`. + +:: + + struct file_operations cdrom_fops + +The contents of this structure were described in cdrom_api_. +A pointer to this structure is assigned to the *fops* field +of the *struct gendisk*. + +:: + + int register_cdrom(struct cdrom_device_info *cdi) + +This function is used in about the same way one registers *cdrom_fops* +with the kernel, the device operations and information structures, +as described in cdrom_api_, should be registered with the +Uniform CD-ROM Driver:: + + register_cdrom(&_info); + + +This function returns zero upon success, and non-zero upon +failure. The structure *_info* should have a pointer to the +driver's *_dops*, as in:: + + struct cdrom_device_info _info = { + _dops; + ... + } + +Note that a driver must have one static structure, *_dops*, while +it may have as many structures *_info* as there are minor devices +active. *Register_cdrom()* builds a linked list from these. + + +:: + + void unregister_cdrom(struct cdrom_device_info *cdi) + +Unregistering device *cdi* with minor number *MINOR(cdi->dev)* removes +the minor device from the list. If it was the last registered minor for +the low-level driver, this disconnects the registered device-operation +routines from the CD-ROM interface. This function returns zero upon +success, and non-zero upon failure. + +:: + + int cdrom_open(struct inode * ip, struct file * fp) + +This function is not called directly by the low-level drivers, it is +listed in the standard *cdrom_fops*. If the VFS opens a file, this +function becomes active. A strategy is implemented in this routine, +taking care of all capabilities and options that are set in the +*cdrom_device_ops* connected to the device. Then, the program flow is +transferred to the device_dependent *open()* call. + +:: + + void cdrom_release(struct inode *ip, struct file *fp) + +This function implements the reverse-logic of *cdrom_open()*, and then +calls the device-dependent *release()* routine. When the use-count has +reached 0, the allocated buffers are flushed by calls to *sync_dev(dev)* +and *invalidate_buffers(dev)*. + + +.. _cdrom_ioctl: + +:: + + int cdrom_ioctl(struct inode *ip, struct file *fp, + unsigned int cmd, unsigned long arg) + +This function handles all the standard *ioctl* requests for CD-ROM +devices in a uniform way. The different calls fall into three +categories: *ioctl()'s* that can be directly implemented by device +operations, ones that are routed through the call *audio_ioctl()*, and +the remaining ones, that are presumable device-dependent. Generally, a +negative return value indicates an error. + +Directly implemented *ioctl()'s* +-------------------------------- + +The following `old` CD-ROM *ioctl()*\ 's are implemented by directly +calling device-operations in *cdrom_device_ops*, if implemented and +not masked: + +`CDROMMULTISESSION` + Requests the last session on a CD-ROM. +`CDROMEJECT` + Open tray. +`CDROMCLOSETRAY` + Close tray. +`CDROMEJECT_SW` + If *arg\not=0*, set behavior to auto-close (close + tray on first open) and auto-eject (eject on last release), otherwise + set behavior to non-moving on *open()* and *release()* calls. +`CDROM_GET_MCN` + Get the Media Catalog Number from a CD. + +*Ioctl*s routed through *audio_ioctl()* +--------------------------------------- + +The following set of *ioctl()'s* are all implemented through a call to +the *cdrom_fops* function *audio_ioctl()*. Memory checks and +allocation are performed in *cdrom_ioctl()*, and also sanitization of +address format (*CDROM_LBA*/*CDROM_MSF*) is done. + +`CDROMSUBCHNL` + Get sub-channel data in argument *arg* of type + `struct cdrom_subchnl *`. +`CDROMREADTOCHDR` + Read Table of Contents header, in *arg* of type + `struct cdrom_tochdr *`. +`CDROMREADTOCENTRY` + Read a Table of Contents entry in *arg* and specified by *arg* + of type `struct cdrom_tocentry *`. +`CDROMPLAYMSF` + Play audio fragment specified in Minute, Second, Frame format, + delimited by *arg* of type `struct cdrom_msf *`. +`CDROMPLAYTRKIND` + Play audio fragment in track-index format delimited by *arg* + of type `struct cdrom_ti *`. +`CDROMVOLCTRL` + Set volume specified by *arg* of type `struct cdrom_volctrl *`. +`CDROMVOLREAD` + Read volume into by *arg* of type `struct cdrom_volctrl *`. +`CDROMSTART` + Spin up disc. +`CDROMSTOP` + Stop playback of audio fragment. +`CDROMPAUSE` + Pause playback of audio fragment. +`CDROMRESUME` + Resume playing. + +New *ioctl()'s* in `cdrom.c` +---------------------------- + +The following *ioctl()'s* have been introduced to allow user programs to +control the behavior of individual CD-ROM devices. New *ioctl* +commands can be identified by the underscores in their names. + +`CDROM_SET_OPTIONS` + Set options specified by *arg*. Returns the option flag register + after modification. Use *arg = \rm0* for reading the current flags. +`CDROM_CLEAR_OPTIONS` + Clear options specified by *arg*. Returns the option flag register + after modification. +`CDROM_SELECT_SPEED` + Select head-rate speed of disc specified as by *arg* in units + of standard cdrom speed (176\,kB/sec raw data or + 150kB/sec file system data). The value 0 means `auto-select`, + i. e., play audio discs at real time and data discs at maximum speed. + The value *arg* is checked against the maximum head rate of the + drive found in the *cdrom_dops*. +`CDROM_SELECT_DISC` + Select disc numbered *arg* from a juke-box. + + First disc is numbered 0. The number *arg* is checked against the + maximum number of discs in the juke-box found in the *cdrom_dops*. +`CDROM_MEDIA_CHANGED` + Returns 1 if a disc has been changed since the last call. + Note that calls to *cdrom_media_changed* by the VFS are treated + by an independent queue, so both mechanisms will detect a + media change once. For juke-boxes, an extra argument *arg* + specifies the slot for which the information is given. The special + value *CDSL_CURRENT* requests that information about the currently + selected slot be returned. +`CDROM_DRIVE_STATUS` + Returns the status of the drive by a call to + *drive_status()*. Return values are defined in cdrom_drive_status_. + Note that this call doesn't return information on the + current playing activity of the drive; this can be polled through + an *ioctl* call to *CDROMSUBCHNL*. For juke-boxes, an extra argument + *arg* specifies the slot for which (possibly limited) information is + given. The special value *CDSL_CURRENT* requests that information + about the currently selected slot be returned. +`CDROM_DISC_STATUS` + Returns the type of the disc currently in the drive. + It should be viewed as a complement to *CDROM_DRIVE_STATUS*. + This *ioctl* can provide *some* information about the current + disc that is inserted in the drive. This functionality used to be + implemented in the low level drivers, but is now carried out + entirely in Uniform CD-ROM Driver. + + The history of development of the CD's use as a carrier medium for + various digital information has lead to many different disc types. + This *ioctl* is useful only in the case that CDs have \emph {only + one} type of data on them. While this is often the case, it is + also very common for CDs to have some tracks with data, and some + tracks with audio. Because this is an existing interface, rather + than fixing this interface by changing the assumptions it was made + under, thereby breaking all user applications that use this + function, the Uniform CD-ROM Driver implements this *ioctl* as + follows: If the CD in question has audio tracks on it, and it has + absolutely no CD-I, XA, or data tracks on it, it will be reported + as *CDS_AUDIO*. If it has both audio and data tracks, it will + return *CDS_MIXED*. If there are no audio tracks on the disc, and + if the CD in question has any CD-I tracks on it, it will be + reported as *CDS_XA_2_2*. Failing that, if the CD in question + has any XA tracks on it, it will be reported as *CDS_XA_2_1*. + Finally, if the CD in question has any data tracks on it, + it will be reported as a data CD (*CDS_DATA_1*). + + This *ioctl* can return:: + + CDS_NO_INFO /* no information available */ + CDS_NO_DISC /* no disc is inserted, or tray is opened */ + CDS_AUDIO /* Audio disc (2352 audio bytes/frame) */ + CDS_DATA_1 /* data disc, mode 1 (2048 user bytes/frame) */ + CDS_XA_2_1 /* mixed data (XA), mode 2, form 1 (2048 user bytes) */ + CDS_XA_2_2 /* mixed data (XA), mode 2, form 1 (2324 user bytes) */ + CDS_MIXED /* mixed audio/data disc */ + + For some information concerning frame layout of the various disc + types, see a recent version of `cdrom.h`. + +`CDROM_CHANGER_NSLOTS` + Returns the number of slots in a juke-box. +`CDROMRESET` + Reset the drive. +`CDROM_GET_CAPABILITY` + Returns the *capability* flags for the drive. Refer to section + cdrom_capabilities_ for more information on these flags. +`CDROM_LOCKDOOR` + Locks the door of the drive. `arg == 0` unlocks the door, + any other value locks it. +`CDROM_DEBUG` + Turns on debugging info. Only root is allowed to do this. + Same semantics as CDROM_LOCKDOOR. + + +Device dependent *ioctl()'s* +---------------------------- + +Finally, all other *ioctl()'s* are passed to the function *dev_ioctl()*, +if implemented. No memory allocation or verification is carried out. + +How to update your driver +========================= + +- Make a backup of your current driver. +- Get hold of the files `cdrom.c` and `cdrom.h`, they should be in + the directory tree that came with this documentation. +- Make sure you include `cdrom.h`. +- Change the 3rd argument of *register_blkdev* from `&_fops` + to `&cdrom_fops`. +- Just after that line, add the following to register with the Uniform + CD-ROM Driver:: + + register_cdrom(&_info);* + + Similarly, add a call to *unregister_cdrom()* at the appropriate place. +- Copy an example of the device-operations *struct* to your + source, e. g., from `cm206.c` *cm206_dops*, and change all + entries to names corresponding to your driver, or names you just + happen to like. If your driver doesn't support a certain function, + make the entry *NULL*. At the entry *capability* you should list all + capabilities your driver currently supports. If your driver + has a capability that is not listed, please send me a message. +- Copy the *cdrom_device_info* declaration from the same example + driver, and modify the entries according to your needs. If your + driver dynamically determines the capabilities of the hardware, this + structure should also be declared dynamically. +- Implement all functions in your `_dops` structure, + according to prototypes listed in `cdrom.h`, and specifications given + in cdrom_api_. Most likely you have already implemented + the code in a large part, and you will almost certainly need to adapt the + prototype and return values. +- Rename your `_ioctl()` function to *audio_ioctl* and + change the prototype a little. Remove entries listed in the first + part in cdrom_ioctl_, if your code was OK, these are + just calls to the routines you adapted in the previous step. +- You may remove all remaining memory checking code in the + *audio_ioctl()* function that deals with audio commands (these are + listed in the second part of cdrom_ioctl_. There is no + need for memory allocation either, so most *case*s in the *switch* + statement look similar to:: + + case CDROMREADTOCENTRY: + get_toc_entry\bigl((struct cdrom_tocentry *) arg); + +- All remaining *ioctl* cases must be moved to a separate + function, *_ioctl*, the device-dependent *ioctl()'s*. Note that + memory checking and allocation must be kept in this code! +- Change the prototypes of *_open()* and + *_release()*, and remove any strategic code (i. e., tray + movement, door locking, etc.). +- Try to recompile the drivers. We advise you to use modules, both + for `cdrom.o` and your driver, as debugging is much easier this + way. + +Thanks +====== + +Thanks to all the people involved. First, Erik Andersen, who has +taken over the torch in maintaining `cdrom.c` and integrating much +CD-ROM-related code in the 2.1-kernel. Thanks to Scott Snyder and +Gerd Knorr, who were the first to implement this interface for SCSI +and IDE-CD drivers and added many ideas for extension of the data +structures relative to kernel~2.0. Further thanks to Heiko Eißfeldt, +Thomas Quinot, Jon Tombs, Ken Pizzini, Eberhard Mönkeberg and Andrew Kroll, +the Linux CD-ROM device driver developers who were kind +enough to give suggestions and criticisms during the writing. Finally +of course, I want to thank Linus Torvalds for making this possible in +the first place. diff --git a/drivers/cdrom/cdrom.c b/drivers/cdrom/cdrom.c index 933268b8d6a5..5d1e0a4a7d84 100644 --- a/drivers/cdrom/cdrom.c +++ b/drivers/cdrom/cdrom.c @@ -7,7 +7,7 @@ License. See linux/COPYING for more information. Uniform CD-ROM driver for Linux. - See Documentation/cdrom/cdrom-standard.tex for usage information. + See Documentation/cdrom/cdrom-standard.txt for usage information. The routines in the file provide a uniform interface between the software that uses CD-ROMs and the various low-level drivers that -- 2.30.2