From e25fbe3fe531029dc7b100ea4c79dbc802e17fc2 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 14 Nov 2014 09:37:00 -0200 Subject: [PATCH] gw_ventana: Move the DCD settings to spl code mx6sabresd_spl.cfg configures CCM registers, GPR registers and CCM_CCOSR. Move the configuration to the spl code. CCM_CCOSR setting is no longer required to get audio functionality in the kernel, so remove such setting. Signed-off-by: Fabio Estevam --- board/gateworks/gw_ventana/clocks.cfg | 42 --------------------- board/gateworks/gw_ventana/gw_ventana.cfg | 6 --- board/gateworks/gw_ventana/gw_ventana_spl.c | 28 ++++++++++++++ 3 files changed, 28 insertions(+), 48 deletions(-) delete mode 100644 board/gateworks/gw_ventana/clocks.cfg diff --git a/board/gateworks/gw_ventana/clocks.cfg b/board/gateworks/gw_ventana/clocks.cfg deleted file mode 100644 index a8118a258e..0000000000 --- a/board/gateworks/gw_ventana/clocks.cfg +++ /dev/null @@ -1,42 +0,0 @@ -/* - * Copyright (C) 2013 Boundary Devices - * Copyright (C) 2013 Gateworks Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Device Configuration Data (DCD) - * - * Each entry must have the format: - * Addr-type Address Value - * - * where: - * Addr-type register length (1,2 or 4 bytes) - * Address absolute address of the register - * value value to be stored in the register - */ - -/* set the default clock gate to save power */ -DATA 4, CCM_CCGR0, 0x00C03F3F -DATA 4, CCM_CCGR1, 0x0030FC03 -DATA 4, CCM_CCGR2, 0x0FFFC000 -DATA 4, CCM_CCGR3, 0x3FF00000 -DATA 4, CCM_CCGR4, 0xFFFFF300 /* enable NAND/GPMI/BCH clocks */ -DATA 4, CCM_CCGR5, 0x0F0000C3 -DATA 4, CCM_CCGR6, 0x000003FF - -/* enable AXI cache for VDOA/VPU/IPU */ -DATA 4, MX6_IOMUXC_GPR4, 0xF00000CF -/* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ -DATA 4, MX6_IOMUXC_GPR6, 0x007F007F -DATA 4, MX6_IOMUXC_GPR7, 0x007F007F - -/* - * Setup CCM_CCOSR register as follows: - * - * cko1_en = 1 --> CKO1 enabled - * cko1_div = 111 --> divide by 8 - * cko1_sel = 1011 --> ahb_clk_root - * - * This sets CKO1 at ahb_clk_root/8 = 132/8 = 16.5 MHz - */ -DATA 4, CCM_CCOSR, 0x000000fb diff --git a/board/gateworks/gw_ventana/gw_ventana.cfg b/board/gateworks/gw_ventana/gw_ventana.cfg index 9ab95f5c93..dd8aa613f0 100644 --- a/board/gateworks/gw_ventana/gw_ventana.cfg +++ b/board/gateworks/gw_ventana/gw_ventana.cfg @@ -21,9 +21,3 @@ BOOT_FROM spi #else BOOT_FROM nand #endif - -#define __ASSEMBLY__ -#include -#include "asm/arch/iomux.h" -#include "asm/arch/crm_regs.h" -#include "clocks.cfg" diff --git a/board/gateworks/gw_ventana/gw_ventana_spl.c b/board/gateworks/gw_ventana/gw_ventana_spl.c index ca35b3cb7e..d6a584745b 100644 --- a/board/gateworks/gw_ventana/gw_ventana_spl.c +++ b/board/gateworks/gw_ventana/gw_ventana_spl.c @@ -8,6 +8,7 @@ #include #include #include +#include #include #include #include @@ -392,6 +393,30 @@ static void spl_dram_init(int width, int size_mb, int board_model) mx6_dram_cfg(&sysinfo, calib, mem); } +static void ccgr_init(void) +{ + struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + + writel(0x00C03F3F, &ccm->CCGR0); + writel(0x0030FC03, &ccm->CCGR1); + writel(0x0FFFC000, &ccm->CCGR2); + writel(0x3FF00000, &ccm->CCGR3); + writel(0x00FFF300, &ccm->CCGR4); + writel(0x0F0000C3, &ccm->CCGR5); + writel(0x000003FF, &ccm->CCGR6); +} + +static void gpr_init(void) +{ + struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR; + + /* enable AXI cache for VDOA/VPU/IPU */ + writel(0xF00000CF, &iomux->gpr[4]); + /* set IPU AXI-id0 Qos=0xf(bypass) AXI-id1 Qos=0x7 */ + writel(0x007F007F, &iomux->gpr[6]); + writel(0x007F007F, &iomux->gpr[7]); +} + /* * called from C runtime startup code (arch/arm/lib/crt0.S:_main) * - we have a stack and a place to store GD, both in SRAM @@ -405,6 +430,9 @@ void board_init_f(ulong dummy) /* setup AIPS and disable watchdog */ arch_cpu_init(); + ccgr_init(); + gpr_init(); + /* iomux and setup of i2c */ board_early_init_f(); i2c_setup_iomux(); -- 2.30.2