From e1cff82c1097bda2478c7ee74e13dfab33561639 Mon Sep 17 00:00:00 2001 From: Torsten Duwe Date: Tue, 12 Nov 2019 18:59:40 +0100 Subject: [PATCH] drm/bridge: fix anx6345 compilation for v5.5 The anx6345 driver originally was copied from anx78xx.c, which has meanwhile seen a few changes. In particular, the removal of drm_dp_link helpers and the discontinuation to include drm_bridge.h from drm_crtc.h breaks compilation in linux-5.5. Apply equivalents of these changes to anx6345.c. Fixes: 6aa192698089 ("drm/bridge: Add Analogix anx6345 support") Signed-off-by: Torsten Duwe Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20191112175940.GA13539@lst.de --- .../drm/bridge/analogix/analogix-anx6345.c | 60 +++++++++++++------ 1 file changed, 42 insertions(+), 18 deletions(-) diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c index 4574d6b264de..b4f3a923a52a 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c +++ b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c @@ -19,6 +19,7 @@ #include #include +#include #include #include #include @@ -49,7 +50,6 @@ struct anx6345 { struct i2c_client *client; struct edid *edid; struct drm_connector connector; - struct drm_dp_link link; struct drm_panel *panel; struct regulator *dvdd12; struct regulator *dvdd25; @@ -97,7 +97,7 @@ static ssize_t anx6345_aux_transfer(struct drm_dp_aux *aux, static int anx6345_dp_link_training(struct anx6345 *anx6345) { unsigned int value; - u8 dp_bw; + u8 dp_bw, dpcd[2]; int err; err = anx6345_clear_bits(anx6345->map[I2C_IDX_TXCOM], @@ -144,18 +144,34 @@ static int anx6345_dp_link_training(struct anx6345 *anx6345) if (err) return err; - /* Check link capabilities */ - err = drm_dp_link_probe(&anx6345->aux, &anx6345->link); - if (err < 0) { - DRM_ERROR("Failed to probe link capabilities: %d\n", err); - return err; - } + /* + * Power up the sink (DP_SET_POWER register is only available on DPCD + * v1.1 and later). + */ + if (anx6345->dpcd[DP_DPCD_REV] >= 0x11) { + err = drm_dp_dpcd_readb(&anx6345->aux, DP_SET_POWER, &dpcd[0]); + if (err < 0) { + DRM_ERROR("Failed to read DP_SET_POWER register: %d\n", + err); + return err; + } - /* Power up the sink */ - err = drm_dp_link_power_up(&anx6345->aux, &anx6345->link); - if (err < 0) { - DRM_ERROR("Failed to power up DisplayPort link: %d\n", err); - return err; + dpcd[0] &= ~DP_SET_POWER_MASK; + dpcd[0] |= DP_SET_POWER_D0; + + err = drm_dp_dpcd_writeb(&anx6345->aux, DP_SET_POWER, dpcd[0]); + if (err < 0) { + DRM_ERROR("Failed to power up DisplayPort link: %d\n", + err); + return err; + } + + /* + * According to the DP 1.1 specification, a "Sink Device must + * exit the power saving state within 1 ms" (Section 2.5.3.1, + * Table 5-52, "Sink Control Field" (register 0x600). + */ + usleep_range(1000, 2000); } /* Possibly enable downspread on the sink */ @@ -194,20 +210,28 @@ static int anx6345_dp_link_training(struct anx6345 *anx6345) if (err) return err; - value = drm_dp_link_rate_to_bw_code(anx6345->link.rate); + dpcd[0] = drm_dp_max_link_rate(anx6345->dpcd); + dpcd[0] = drm_dp_link_rate_to_bw_code(dpcd[0]); err = regmap_write(anx6345->map[I2C_IDX_DPTX], - SP_DP_MAIN_LINK_BW_SET_REG, value); + SP_DP_MAIN_LINK_BW_SET_REG, dpcd[0]); if (err) return err; + dpcd[1] = drm_dp_max_lane_count(anx6345->dpcd); + err = regmap_write(anx6345->map[I2C_IDX_DPTX], - SP_DP_LANE_COUNT_SET_REG, anx6345->link.num_lanes); + SP_DP_LANE_COUNT_SET_REG, dpcd[1]); if (err) return err; - err = drm_dp_link_configure(&anx6345->aux, &anx6345->link); + if (drm_dp_enhanced_frame_cap(anx6345->dpcd)) + dpcd[1] |= DP_LANE_COUNT_ENHANCED_FRAME_EN; + + err = drm_dp_dpcd_write(&anx6345->aux, DP_LINK_BW_SET, dpcd, + sizeof(dpcd)); + if (err < 0) { - DRM_ERROR("Failed to configure DisplayPort link: %d\n", err); + DRM_ERROR("Failed to configure link: %d\n", err); return err; } -- 2.30.2