From dfcc4615f09c33454bc553567f7c7506cae60cb9 Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Thu, 8 Nov 2012 07:07:08 +0000 Subject: [PATCH] ixgbe: ethtool ixgbe_diag_test cleanup This patch cleans up the ethtool diagnostics test by ensuring that the tests work properly regardless of what state the adapter was in. The SRIOV VF check is done at the beginning, forgoing the link test. The if_running -> dev_close is moved before the link test, as well as a call to enable the Tx laser. This ensures that the link test will return valid results even when adapter was previously down. Also, a call to disable the Tx laser is added if the device was down before the start. This ensures consistent behavior of the Tx laser before and after the diagnostic checks. The end result is consistent behavior regardless of device state. Signed-off-by: Jacob Keller Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- .../net/ethernet/intel/ixgbe/ixgbe_ethtool.c | 38 +++++++++++++------ 1 file changed, 26 insertions(+), 12 deletions(-) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 326858424345..21bc72e99c2e 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -1837,19 +1837,11 @@ static void ixgbe_diag_test(struct net_device *netdev, struct ethtool_test *eth_test, u64 *data) { struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; bool if_running = netif_running(netdev); set_bit(__IXGBE_TESTING, &adapter->state); if (eth_test->flags == ETH_TEST_FL_OFFLINE) { - /* Offline tests */ - - e_info(hw, "offline testing starting\n"); - - /* Link test performed before hardware reset so autoneg doesn't - * interfere with test result */ - if (ixgbe_link_test(adapter, &data[4])) - eth_test->flags |= ETH_TEST_FL_FAILED; - if (adapter->flags & IXGBE_FLAG_SRIOV_ENABLED) { int i; for (i = 0; i < adapter->num_vfs; i++) { @@ -1870,12 +1862,24 @@ static void ixgbe_diag_test(struct net_device *netdev, } } + /* Offline tests */ + e_info(hw, "offline testing starting\n"); + if (if_running) /* indicate we're in test mode */ dev_close(netdev); - else - ixgbe_reset(adapter); + /* bringing adapter down disables SFP+ optics */ + if (hw->mac.ops.enable_tx_laser) + hw->mac.ops.enable_tx_laser(hw); + + /* Link test performed before hardware reset so autoneg doesn't + * interfere with test result + */ + if (ixgbe_link_test(adapter, &data[4])) + eth_test->flags |= ETH_TEST_FL_FAILED; + + ixgbe_reset(adapter); e_info(hw, "register testing starting\n"); if (ixgbe_reg_test(adapter, &data[0])) eth_test->flags |= ETH_TEST_FL_FAILED; @@ -1908,16 +1912,22 @@ static void ixgbe_diag_test(struct net_device *netdev, skip_loopback: ixgbe_reset(adapter); + /* clear testing bit and return adapter to previous state */ clear_bit(__IXGBE_TESTING, &adapter->state); if (if_running) dev_open(netdev); } else { e_info(hw, "online testing starting\n"); + + /* if adapter is down, SFP+ optics will be disabled */ + if (!if_running && hw->mac.ops.enable_tx_laser) + hw->mac.ops.enable_tx_laser(hw); + /* Online tests */ if (ixgbe_link_test(adapter, &data[4])) eth_test->flags |= ETH_TEST_FL_FAILED; - /* Online tests aren't run; pass by default */ + /* Offline tests aren't run; pass by default */ data[0] = 0; data[1] = 0; data[2] = 0; @@ -1925,6 +1935,10 @@ skip_loopback: clear_bit(__IXGBE_TESTING, &adapter->state); } + + /* if adapter was down, ensure SFP+ optics are disabled again */ + if (!if_running && hw->mac.ops.disable_tx_laser) + hw->mac.ops.disable_tx_laser(hw); skip_ol_tests: msleep_interruptible(4 * 1000); } -- 2.30.2