From dee1b66ce4f406d36fef70d1dd4360c5f1d26218 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 13 Aug 2007 16:10:30 +0200 Subject: [PATCH] [ALSA] hda-intel - Add power_save_controller module option Add power_save_controller module option instead of define flag. Also, added descriptions of new module options in ALSA-Configuration.txt. Signed-off-by: Takashi Iwai Signed-off-by: Jaroslav Kysela --- .../sound/alsa/ALSA-Configuration.txt | 10 ++++++++ sound/pci/hda/hda_intel.c | 25 ++++++++----------- 2 files changed, 21 insertions(+), 14 deletions(-) diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index f71ed680d33c..2bdabe23bc70 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -768,6 +768,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. single_cmd - Use single immediate commands to communicate with codecs (for debugging only) enable_msi - Enable Message Signaled Interrupt (MSI) (default = off) + power_save - Automatic power-saving timtout (in second, 0 = + disable, default = 10) + power_save_controller - Reset HD-audio controller in power-saving mode + (default = on) This module supports one card and autoprobe. @@ -993,6 +997,12 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. subsystem ID (output of "lspci -nv") to ALSA BTS or alsa-devel ML (see the section "Links and Addresses"). + When CONFIG_SND_HDA_POWER_SAVE is set, two options, power_save and + power_save_controller become available. power_save specifies the + time to turn off the power automatically at idle status. When + power_save_controller is true, the controller is also turned off. + This might result in more obvious click noise at turning on/off. + Note 2: If you get click noises on output, try the module option position_fix=1 or 2. position_fix=1 will use the SD_LPIB register value without FIFO size correction as the current diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index f9c7c2e4f922..e20629a2d7d1 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -75,8 +75,18 @@ MODULE_PARM_DESC(single_cmd, "Use single command to communicate with codecs " module_param(enable_msi, int, 0); MODULE_PARM_DESC(enable_msi, "Enable Message Signaled Interrupt (MSI)"); +#ifdef CONFIG_SND_HDA_POWER_SAVE /* power_save option is defined in hda_codec.c */ +/* reset the HD-audio controller in power save mode. + * this may give more power-saving, but will take longer time to + * wake up. + */ +static int power_save_controller = 1; +module_param(power_save_controller, bool, 0644); +MODULE_PARM_DESC(power_save_controller, "Reset controller in power save mode."); +#endif + /* just for backward compatibility */ static int enable; module_param(enable, bool, 0444); @@ -102,17 +112,6 @@ MODULE_DESCRIPTION("Intel HDA driver"); #define SFX "hda-intel: " -/* - * build flags - */ - -/* - * reset the HD-audio controller in power save mode. - * this may give more power-saving, but will take longer time to - * wake up. - */ -#define HDA_POWER_SAVE_RESET_CONTROLLER - /* * registers @@ -1533,10 +1532,8 @@ static void azx_power_notify(struct hda_codec *codec) } if (power_on) azx_init_chip(chip); -#ifdef HDA_POWER_SAVE_RESET_CONTROLLER - else if (chip->running) + else if (chip->running && power_save_controller) azx_stop_chip(chip); -#endif } #endif /* CONFIG_SND_HDA_POWER_SAVE */ -- 2.30.2