From dec49e862ef9e74654fad3595fda5be99d33711a Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Tue, 5 Jul 2016 17:10:14 -0600 Subject: [PATCH] dm: zynq: usb: Convert to CONFIG_DM_USB Convert zynq USB to driver model. Note this is tested on zynq-zybo only. Signed-off-by: Simon Glass --- arch/arm/Kconfig | 2 + drivers/usb/host/ehci-zynq.c | 103 +++++++++++++++++------------------ 2 files changed, 53 insertions(+), 52 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4a62d4b108..9a7ebed00f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -661,6 +661,7 @@ config ARCH_ZYNQ select DM_SERIAL select DM_SPI_FLASH select SPL_SEPARATE_BSS if SPL + select DM_USB if USB config ARCH_ZYNQMP bool "Support Xilinx ZynqMP Platform" @@ -671,6 +672,7 @@ config ARCH_ZYNQMP select SUPPORT_SPL select CLK select SPL_CLK + select DM_USB if USB config TEGRA bool "NVIDIA Tegra" diff --git a/drivers/usb/host/ehci-zynq.c b/drivers/usb/host/ehci-zynq.c index 37a7935b43..76642cdad7 100644 --- a/drivers/usb/host/ehci-zynq.c +++ b/drivers/usb/host/ehci-zynq.c @@ -7,55 +7,48 @@ */ #include +#include +#include #include #include #include -#include #include #include #include "ehci.h" -#define ZYNQ_USB_USBCMD_RST 0x0000002 -#define ZYNQ_USB_USBCMD_STOP 0x0000000 -#define ZYNQ_USB_NUM_MIO 12 +struct zynq_ehci_priv { + struct ehci_ctrl ehcictrl; + struct usb_ehci *ehci; +}; -/* - * Create the appropriate control structures to manage - * a new EHCI host controller. - */ -int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr, - struct ehci_hcor **hcor) +static int ehci_zynq_ofdata_to_platdata(struct udevice *dev) { - struct usb_ehci *ehci; + struct zynq_ehci_priv *priv = dev_get_priv(dev); + + priv->ehci = (struct usb_ehci *)dev_get_addr_ptr(dev); + if (!priv->ehci) + return -EINVAL; + + return 0; +} + +static int ehci_zynq_probe(struct udevice *dev) +{ + struct usb_platdata *plat = dev_get_platdata(dev); + struct zynq_ehci_priv *priv = dev_get_priv(dev); + struct ehci_hccr *hccr; + struct ehci_hcor *hcor; struct ulpi_viewport ulpi_vp; - int ret, mio_usb; /* Used for writing the ULPI data address */ struct ulpi_regs *ulpi = (struct ulpi_regs *)0; + int ret; - if (!index) { - mio_usb = zynq_slcr_get_mio_pin_status("usb0"); - if (mio_usb != ZYNQ_USB_NUM_MIO) { - printf("usb0 wrong num MIO: %d, Index %d\n", mio_usb, - index); - return -1; - } - ehci = (struct usb_ehci *)ZYNQ_USB_BASEADDR0; - } else { - mio_usb = zynq_slcr_get_mio_pin_status("usb1"); - if (mio_usb != ZYNQ_USB_NUM_MIO) { - printf("usb1 wrong num MIO: %d, Index %d\n", mio_usb, - index); - return -1; - } - ehci = (struct usb_ehci *)ZYNQ_USB_BASEADDR1; - } - - *hccr = (struct ehci_hccr *)((uint32_t)&ehci->caplength); - *hcor = (struct ehci_hcor *)((uint32_t) *hccr + - HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); + hccr = (struct ehci_hccr *)((uint32_t)&priv->ehci->caplength); + hcor = (struct ehci_hcor *)((uint32_t) hccr + + HC_LENGTH(ehci_readl(&hccr->cr_capbase))); - ulpi_vp.viewport_addr = (u32)&ehci->ulpi_viewpoint; + ulpi_vp.viewport_addr = (u32)&priv->ehci->ulpi_viewpoint; ulpi_vp.port_num = 0; ret = ulpi_init(&ulpi_vp); @@ -77,28 +70,34 @@ int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr, ulpi_write(&ulpi_vp, &ulpi->otg_ctrl_set, ULPI_OTG_DRVVBUS | ULPI_OTG_DRVVBUS_EXT); - return 0; + return ehci_register(dev, hccr, hcor, NULL, 0, plat->init_type); } -/* - * Destroy the appropriate control structures corresponding - * the the EHCI host controller. - */ -int ehci_hcd_stop(int index) +static int ehci_zynq_remove(struct udevice *dev) { - struct usb_ehci *ehci; - - if (!index) - ehci = (struct usb_ehci *)ZYNQ_USB_BASEADDR0; - else - ehci = (struct usb_ehci *)ZYNQ_USB_BASEADDR1; + int ret; - /* Stop controller */ - writel(ZYNQ_USB_USBCMD_STOP, &ehci->usbcmd); - udelay(1000); - - /* Initiate controller reset */ - writel(ZYNQ_USB_USBCMD_RST, &ehci->usbcmd); + ret = ehci_deregister(dev); + if (ret) + return ret; return 0; } + +static const struct udevice_id ehci_zynq_ids[] = { + { .compatible = "xlnx,zynq-usb-2.20a" }, + { } +}; + +U_BOOT_DRIVER(ehci_zynq) = { + .name = "ehci_zynq", + .id = UCLASS_USB, + .of_match = ehci_zynq_ids, + .ofdata_to_platdata = ehci_zynq_ofdata_to_platdata, + .probe = ehci_zynq_probe, + .remove = ehci_zynq_remove, + .ops = &ehci_usb_ops, + .platdata_auto_alloc_size = sizeof(struct usb_platdata), + .priv_auto_alloc_size = sizeof(struct zynq_ehci_priv), + .flags = DM_FLAG_ALLOC_PRIV_DMA, +}; -- 2.30.2