From ddc922ff2c20ae0b7f9ce2df1ac28143e2f325bd Mon Sep 17 00:00:00 2001 From: Niklaus Giger Date: Sun, 4 Oct 2009 20:04:20 +0200 Subject: [PATCH] ppc_4xx: Apply new HW register names Modify all existing *.c files to use the new register names as seen in the AMCC manuals. Signed-off-by: Niklaus Giger Signed-off-by: Stefan Roese --- board/amcc/bamboo/bamboo.c | 32 ++++---- board/amcc/canyonlands/canyonlands.c | 22 ++--- board/amcc/ebony/ebony.c | 22 ++--- board/amcc/katmai/katmai.c | 22 ++--- board/amcc/luan/epld.h | 22 ++--- board/amcc/luan/luan.c | 22 ++--- board/amcc/ocotea/ocotea.c | 22 ++--- board/amcc/sequoia/sequoia.c | 28 +++---- board/amcc/taishan/showinfo.c | 112 +++++++++++++------------- board/amcc/taishan/taishan.c | 22 ++--- board/amcc/yosemite/yosemite.c | 32 ++++---- board/amcc/yucca/yucca.c | 22 ++--- board/esd/common/cmd_loadpci.c | 2 +- board/esd/du440/du440.c | 28 +++---- board/esd/pmc440/cmd_pmc440.c | 10 +-- board/esd/pmc440/pmc440.c | 32 ++++---- board/exbitgen/init.S | 4 +- board/gdsys/gdppc440etx/gdppc440etx.c | 32 ++++---- board/gdsys/intip/intip.c | 22 ++--- board/korat/korat.c | 28 +++---- board/lwmon5/lwmon5.c | 32 ++++---- board/netstal/hcu5/hcu5.c | 28 +++---- board/pcs440ep/pcs440ep.c | 32 ++++---- board/prodrive/alpr/alpr.c | 52 ++++++------ board/prodrive/p3p440/p3p440.c | 22 ++--- board/sandburst/common/ppc440gx_i2c.h | 2 +- board/sandburst/common/sb_common.c | 22 ++--- board/xes/xpedite1000/xpedite1000.c | 24 +++--- cpu/ppc4xx/4xx_pci.c | 48 +++++------ cpu/ppc4xx/cpu_init.c | 4 +- cpu/ppc4xx/miiphy.c | 24 +++--- cpu/ppc4xx/speed.c | 6 +- drivers/net/4xx_enet.c | 100 +++++++++++------------ post/cpu/ppc4xx/ether.c | 50 ++++++------ 34 files changed, 492 insertions(+), 492 deletions(-) diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c index 38186a5d37..2598f2cf41 100644 --- a/board/amcc/bamboo/bamboo.c +++ b/board/amcc/bamboo/bamboo.c @@ -542,22 +542,22 @@ void pci_target_init(struct pci_controller *hose) | Use byte reversed out routines to handle endianess. | Make this region non-prefetchable. +--------------------------------------------------------------------------*/ - out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ - out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ - out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */ + out32r(PCIL0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ + out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ + out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ + out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */ + + out32r(PCIL0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ + out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ + out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ + out32r(PCIL0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */ + + out32r(PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ + out32r(PCIL0_PTM1LA, 0); /* Local Addr. Reg */ + out32r(PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ + out32r(PCIL0_PTM2LA, 0); /* Local Addr. Reg */ /*--------------------------------------------------------------------------+ * Set up Configuration registers diff --git a/board/amcc/canyonlands/canyonlands.c b/board/amcc/canyonlands/canyonlands.c index 9495b621ac..91fae1917d 100644 --- a/board/amcc/canyonlands/canyonlands.c +++ b/board/amcc/canyonlands/canyonlands.c @@ -339,27 +339,27 @@ void pci_target_init(struct pci_controller * hose ) /* * Disable everything */ - out_le32((void *)PCIX0_PIM0SA, 0); /* disable */ - out_le32((void *)PCIX0_PIM1SA, 0); /* disable */ - out_le32((void *)PCIX0_PIM2SA, 0); /* disable */ - out_le32((void *)PCIX0_EROMBA, 0); /* disable expansion rom */ + out_le32((void *)PCIL0_PIM0SA, 0); /* disable */ + out_le32((void *)PCIL0_PIM1SA, 0); /* disable */ + out_le32((void *)PCIL0_PIM2SA, 0); /* disable */ + out_le32((void *)PCIL0_EROMBA, 0); /* disable expansion rom */ /* * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 * strapping options to not support sizes such as 128/256 MB. */ - out_le32((void *)PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); - out_le32((void *)PCIX0_PIM0LAH, 0); - out_le32((void *)PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1); - out_le32((void *)PCIX0_BAR0, 0); + out_le32((void *)PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); + out_le32((void *)PCIL0_PIM0LAH, 0); + out_le32((void *)PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1); + out_le32((void *)PCIL0_BAR0, 0); /* * Program the board's subsystem id/vendor id */ - out_le16((void *)PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); - out_le16((void *)PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); + out_le16((void *)PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); + out_le16((void *)PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); - out_le16((void *)PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY); + out_le16((void *)PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY); } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ diff --git a/board/amcc/ebony/ebony.c b/board/amcc/ebony/ebony.c index e61b5de2d8..0ca1accec8 100644 --- a/board/amcc/ebony/ebony.c +++ b/board/amcc/ebony/ebony.c @@ -210,28 +210,28 @@ void pci_target_init(struct pci_controller *hose) /*--------------------------------------------------------------------------+ * Disable everything *--------------------------------------------------------------------------*/ - out32r(PCIX0_PIM0SA, 0); /* disable */ - out32r(PCIX0_PIM1SA, 0); /* disable */ - out32r(PCIX0_PIM2SA, 0); /* disable */ - out32r(PCIX0_EROMBA, 0); /* disable expansion rom */ + out32r(PCIL0_PIM0SA, 0); /* disable */ + out32r(PCIL0_PIM1SA, 0); /* disable */ + out32r(PCIL0_PIM2SA, 0); /* disable */ + out32r(PCIL0_EROMBA, 0); /* disable expansion rom */ /*--------------------------------------------------------------------------+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping * options to not support sizes such as 128/256 MB. *--------------------------------------------------------------------------*/ - out32r(PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); - out32r(PCIX0_PIM0LAH, 0); - out32r(PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1); + out32r(PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); + out32r(PCIL0_PIM0LAH, 0); + out32r(PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1); - out32r(PCIX0_BAR0, 0); + out32r(PCIL0_BAR0, 0); /*--------------------------------------------------------------------------+ * Program the board's subsystem id/vendor id *--------------------------------------------------------------------------*/ - out16r(PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); - out16r(PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); + out16r(PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); + out16r(PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); - out16r(PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY); + out16r(PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY); } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ diff --git a/board/amcc/katmai/katmai.c b/board/amcc/katmai/katmai.c index aa6d0abddb..908f1a5953 100644 --- a/board/amcc/katmai/katmai.c +++ b/board/amcc/katmai/katmai.c @@ -305,27 +305,27 @@ void pci_target_init(struct pci_controller * hose ) /*-------------------------------------------------------------------+ * Disable everything *-------------------------------------------------------------------*/ - out32r( PCIX0_PIM0SA, 0 ); /* disable */ - out32r( PCIX0_PIM1SA, 0 ); /* disable */ - out32r( PCIX0_PIM2SA, 0 ); /* disable */ - out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */ + out32r( PCIL0_PIM0SA, 0 ); /* disable */ + out32r( PCIL0_PIM1SA, 0 ); /* disable */ + out32r( PCIL0_PIM2SA, 0 ); /* disable */ + out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */ /*-------------------------------------------------------------------+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 * strapping options to not support sizes such as 128/256 MB. *-------------------------------------------------------------------*/ - out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); - out32r( PCIX0_PIM0LAH, 0 ); - out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 ); - out32r( PCIX0_BAR0, 0 ); + out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); + out32r( PCIL0_PIM0LAH, 0 ); + out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 ); + out32r( PCIL0_BAR0, 0 ); /*-------------------------------------------------------------------+ * Program the board's subsystem id/vendor id *-------------------------------------------------------------------*/ - out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); + out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); + out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); - out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY ); + out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY ); } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ diff --git a/board/amcc/luan/epld.h b/board/amcc/luan/epld.h index 05362e06d7..569d78c462 100644 --- a/board/amcc/luan/epld.h +++ b/board/amcc/luan/epld.h @@ -8,8 +8,8 @@ #define EPLD0_FLASH_SRAM_SEL_N 0x01 /* 0 SRAM at mem top, 1 small flash at mem top */ #define EPLD1_CLK_CNTL0 0x80 /* FSEL-FB1 of MPC9772 */ -#define EPLD1_PCIX0_CNTL1 0x40 /* S*0 of 9531 */ -#define EPLD1_PCIX0_CNTL2 0x20 /* S*1 of 9531 */ +#define EPLD1_PCIL0_CNTL1 0x40 /* S*0 of 9531 */ +#define EPLD1_PCIL0_CNTL2 0x20 /* S*1 of 9531 */ #define EPLD1_CLK_CNTL3 0x10 /* FSEL-B1 of MPC9772 */ #define EPLD1_CLK_CNTL4 0x08 /* FSEL-B0 of MPC9772 */ #define EPLD1_MASTER_CLOCK6 0x04 /* clock source select 6 */ @@ -29,25 +29,25 @@ #define EPLD3_STATUS_LED2 0x02 /* status LED 2 (1 = LED on) */ #define EPLD3_STATUS_LED1 0x01 /* status LED 1 (1 = LED on) */ -#define EPLD4_PCIX0_VTH1 0x80 /* PCI-X 0 VTH1 status */ -#define EPLD4_PCIX0_VTH2 0x40 /* PCI-X 0 VTH2 status */ -#define EPLD4_PCIX0_VTH3 0x20 /* PCI-X 0 VTH3 status */ -#define EPLD4_PCIX0_VTH4 0x10 /* PCI-X 0 VTH4 status */ +#define EPLD4_PCIL0_VTH1 0x80 /* PCI-X 0 VTH1 status */ +#define EPLD4_PCIL0_VTH2 0x40 /* PCI-X 0 VTH2 status */ +#define EPLD4_PCIL0_VTH3 0x20 /* PCI-X 0 VTH3 status */ +#define EPLD4_PCIL0_VTH4 0x10 /* PCI-X 0 VTH4 status */ #define EPLD4_PCIX1_VTH1 0x08 /* PCI-X 1 VTH1 status */ #define EPLD4_PCIX1_VTH2 0x04 /* PCI-X 1 VTH2 status */ #define EPLD4_PCIX1_VTH3 0x02 /* PCI-X 1 VTH3 status */ #define EPLD4_PCIX1_VTH4 0x01 /* PCI-X 1 VTH4 status */ -#define EPLD5_PCIX0_INT0 0x80 /* PCIX0 INT0 status, write 0 to reset */ -#define EPLD5_PCIX0_INT1 0x40 /* PCIX0 INT1 status, write 0 to reset */ -#define EPLD5_PCIX0_INT2 0x20 /* PCIX0 INT2 status, write 0 to reset */ -#define EPLD5_PCIX0_INT3 0x10 /* PCIX0 INT3 status, write 0 to reset */ +#define EPLD5_PCIL0_INT0 0x80 /* PCIX0 INT0 status, write 0 to reset */ +#define EPLD5_PCIL0_INT1 0x40 /* PCIX0 INT1 status, write 0 to reset */ +#define EPLD5_PCIL0_INT2 0x20 /* PCIX0 INT2 status, write 0 to reset */ +#define EPLD5_PCIL0_INT3 0x10 /* PCIX0 INT3 status, write 0 to reset */ #define EPLD5_PCIX1_INT0 0x08 /* PCIX1 INT0 status, write 0 to reset */ #define EPLD5_PCIX1_INT1 0x04 /* PCIX1 INT1 status, write 0 to reset */ #define EPLD5_PCIX1_INT2 0x02 /* PCIX1 INT2 status, write 0 to reset */ #define EPLD5_PCIX1_INT3 0x01 /* PCIX1 INT3 status, write 0 to reset */ -#define EPLD6_PCIX0_RESET_CTL 0x80 /* 0=enable slot reset, 1=disable slot reset */ +#define EPLD6_PCIL0_RESET_CTL 0x80 /* 0=enable slot reset, 1=disable slot reset */ #define EPLD6_PCIX1_RESET_CTL 0x40 /* 0=enable slot reset, 1=disable slot reset */ #define EPLD6_ETH_INT_MODE 0x20 /* 0=IRQ5 recv's external eth int */ #define EPLD6_PCIX2_RESET_CTL 0x10 /* 0=enable slot reset, 1=disable slot reset */ diff --git a/board/amcc/luan/luan.c b/board/amcc/luan/luan.c index 5f76672fb5..a04f2af3b8 100644 --- a/board/amcc/luan/luan.c +++ b/board/amcc/luan/luan.c @@ -173,28 +173,28 @@ void pci_target_init(struct pci_controller *hose) /*--------------------------------------------------------------------------+ * Disable everything *--------------------------------------------------------------------------*/ - out32r( PCIX0_PIM0SA, 0 ); /* disable */ - out32r( PCIX0_PIM1SA, 0 ); /* disable */ - out32r( PCIX0_PIM2SA, 0 ); /* disable */ - out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */ + out32r( PCIL0_PIM0SA, 0 ); /* disable */ + out32r( PCIL0_PIM1SA, 0 ); /* disable */ + out32r( PCIL0_PIM2SA, 0 ); /* disable */ + out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */ /*--------------------------------------------------------------------------+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping * options to not support sizes such as 128/256 MB. *--------------------------------------------------------------------------*/ - out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); - out32r( PCIX0_PIM0LAH, 0 ); - out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 ); + out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); + out32r( PCIL0_PIM0LAH, 0 ); + out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 ); - out32r( PCIX0_BAR0, 0 ); + out32r( PCIL0_BAR0, 0 ); /*--------------------------------------------------------------------------+ * Program the board's subsystem id/vendor id *--------------------------------------------------------------------------*/ - out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); + out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); + out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); - out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY ); + out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY ); } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ diff --git a/board/amcc/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c index d776edabcd..0aa317ec0e 100644 --- a/board/amcc/ocotea/ocotea.c +++ b/board/amcc/ocotea/ocotea.c @@ -321,28 +321,28 @@ void pci_target_init(struct pci_controller * hose ) /*--------------------------------------------------------------------------+ * Disable everything *--------------------------------------------------------------------------*/ - out32r( PCIX0_PIM0SA, 0 ); /* disable */ - out32r( PCIX0_PIM1SA, 0 ); /* disable */ - out32r( PCIX0_PIM2SA, 0 ); /* disable */ - out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */ + out32r( PCIL0_PIM0SA, 0 ); /* disable */ + out32r( PCIL0_PIM1SA, 0 ); /* disable */ + out32r( PCIL0_PIM2SA, 0 ); /* disable */ + out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */ /*--------------------------------------------------------------------------+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping * options to not support sizes such as 128/256 MB. *--------------------------------------------------------------------------*/ - out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); - out32r( PCIX0_PIM0LAH, 0 ); - out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 ); + out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); + out32r( PCIL0_PIM0LAH, 0 ); + out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 ); - out32r( PCIX0_BAR0, 0 ); + out32r( PCIL0_BAR0, 0 ); /*--------------------------------------------------------------------------+ * Program the board's subsystem id/vendor id *--------------------------------------------------------------------------*/ - out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); + out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); + out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); - out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY ); + out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY ); } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ diff --git a/board/amcc/sequoia/sequoia.c b/board/amcc/sequoia/sequoia.c index 17f831c3f4..d42c802538 100644 --- a/board/amcc/sequoia/sequoia.c +++ b/board/amcc/sequoia/sequoia.c @@ -428,26 +428,26 @@ void pci_target_init(struct pci_controller *hose) * Use byte reversed out routines to handle endianess. * Make this region non-prefetchable. */ - out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */ + out32r(PCIL0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */ /* - disabled b4 setting */ - out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, */ + out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ + out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ + out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M + No prefetching, */ /* and enable region */ - out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute */ + out32r(PCIL0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute */ /* - disabled b4 setting */ - out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ - out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ - out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, */ + out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ + out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ + out32r(PCIL0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M + No prefetching, */ /* and enable region */ - out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */ + out32r(PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ + out32r(PCIL0_PTM1LA, 0); /* Local Addr. Reg */ + out32r(PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ + out32r(PCIL0_PTM2LA, 0); /* Local Addr. Reg */ /* * Set up Configuration registers diff --git a/board/amcc/taishan/showinfo.c b/board/amcc/taishan/showinfo.c index e4e441b319..a9a80e5b6e 100644 --- a/board/amcc/taishan/showinfo.c +++ b/board/amcc/taishan/showinfo.c @@ -39,13 +39,13 @@ void show_reset_reg(void) mfcpr(CPR0_PLLD,reg); printf("cpr_plld = %#010lx\n",reg); - mfcpr(CPR0_PRIMAD,reg); + mfcpr(CPR0_PRIMAD0,reg); printf("cpr_primad = %#010lx\n",reg); - mfcpr(CPR0_PRIMBD,reg); + mfcpr(CPR0_PRIMBD0,reg); printf("cpr_primbd = %#010lx\n",reg); - mfcpr(CPR0_OPBD,reg); + mfcpr(CPR0_OPBD0,reg); printf("cpr_opbd = %#010lx\n",reg); mfcpr(CPR0_PERD,reg); @@ -106,59 +106,59 @@ void show_xbridge_info(void) printf("SDR0_XPLLD = %#010lx\n", reg); printf("PCI-X Bridge Configure registers\n"); - printf("PCIX0_VENDID = %#06x\n", in16r(PCIX0_VENDID)); - printf("PCIX0_DEVID = %#06x\n", in16r(PCIX0_DEVID)); - printf("PCIX0_CMD = %#06x\n", in16r(PCIX0_CMD)); - printf("PCIX0_STATUS = %#06x\n", in16r(PCIX0_STATUS)); - printf("PCIX0_REVID = %#04x\n", in8(PCIX0_REVID)); - printf("PCIX0_CACHELS = %#04x\n", in8(PCIX0_CACHELS)); - printf("PCIX0_LATTIM = %#04x\n", in8(PCIX0_LATTIM)); - printf("PCIX0_HDTYPE = %#04x\n", in8(PCIX0_HDTYPE)); - printf("PCIX0_BIST = %#04x\n", in8(PCIX0_BIST)); - - printf("PCIX0_BAR0 = %#010lx\n", in32r(PCIX0_BAR0)); - printf("PCIX0_BAR1 = %#010lx\n", in32r(PCIX0_BAR1)); - printf("PCIX0_BAR2 = %#010lx\n", in32r(PCIX0_BAR2)); - printf("PCIX0_BAR3 = %#010lx\n", in32r(PCIX0_BAR3)); - printf("PCIX0_BAR4 = %#010lx\n", in32r(PCIX0_BAR4)); - printf("PCIX0_BAR5 = %#010lx\n", in32r(PCIX0_BAR5)); - - printf("PCIX0_CISPTR = %#010lx\n", in32r(PCIX0_CISPTR)); - printf("PCIX0_SBSSYSVID = %#010x\n", in16r(PCIX0_SBSYSVID)); - printf("PCIX0_SBSSYSID = %#010x\n", in16r(PCIX0_SBSYSID)); - printf("PCIX0_EROMBA = %#010lx\n", in32r(PCIX0_EROMBA)); - printf("PCIX0_CAP = %#04x\n", in8(PCIX0_CAP)); - printf("PCIX0_INTLN = %#04x\n", in8(PCIX0_INTLN)); - printf("PCIX0_INTPN = %#04x\n", in8(PCIX0_INTPN)); - printf("PCIX0_MINGNT = %#04x\n", in8(PCIX0_MINGNT)); - printf("PCIX0_MAXLTNCY = %#04x\n", in8(PCIX0_MAXLTNCY)); - - printf("PCIX0_BRDGOPT1 = %#010lx\n", in32r(PCIX0_BRDGOPT1)); - printf("PCIX0_BRDGOPT2 = %#010lx\n", in32r(PCIX0_BRDGOPT2)); - - printf("PCIX0_POM0LAL = %#010lx\n", in32r(PCIX0_POM0LAL)); - printf("PCIX0_POM0LAH = %#010lx\n", in32r(PCIX0_POM0LAH)); - printf("PCIX0_POM0SA = %#010lx\n", in32r(PCIX0_POM0SA)); - printf("PCIX0_POM0PCILAL = %#010lx\n", in32r(PCIX0_POM0PCIAL)); - printf("PCIX0_POM0PCILAH = %#010lx\n", in32r(PCIX0_POM0PCIAH)); - printf("PCIX0_POM1LAL = %#010lx\n", in32r(PCIX0_POM1LAL)); - printf("PCIX0_POM1LAH = %#010lx\n", in32r(PCIX0_POM1LAH)); - printf("PCIX0_POM1SA = %#010lx\n", in32r(PCIX0_POM1SA)); - printf("PCIX0_POM1PCILAL = %#010lx\n", in32r(PCIX0_POM1PCIAL)); - printf("PCIX0_POM1PCILAH = %#010lx\n", in32r(PCIX0_POM1PCIAH)); - printf("PCIX0_POM2SA = %#010lx\n", in32r(PCIX0_POM2SA)); - - printf("PCIX0_PIM0SA = %#010lx\n", in32r(PCIX0_PIM0SA)); - printf("PCIX0_PIM0LAL = %#010lx\n", in32r(PCIX0_PIM0LAL)); - printf("PCIX0_PIM0LAH = %#010lx\n", in32r(PCIX0_PIM0LAH)); - printf("PCIX0_PIM1SA = %#010lx\n", in32r(PCIX0_PIM1SA)); - printf("PCIX0_PIM1LAL = %#010lx\n", in32r(PCIX0_PIM1LAL)); - printf("PCIX0_PIM1LAH = %#010lx\n", in32r(PCIX0_PIM1LAH)); - printf("PCIX0_PIM2SA = %#010lx\n", in32r(PCIX0_PIM1SA)); - printf("PCIX0_PIM2LAL = %#010lx\n", in32r(PCIX0_PIM1LAL)); - printf("PCIX0_PIM2LAH = %#010lx\n", in32r(PCIX0_PIM1LAH)); - - printf("PCIX0_XSTS = %#010lx\n", in32r(PCIX0_STS)); + printf("PCIL0_VENDID = %#06x\n", in16r(PCIL0_VENDID)); + printf("PCIL0_DEVID = %#06x\n", in16r(PCIL0_DEVID)); + printf("PCIL0_CMD = %#06x\n", in16r(PCIL0_CMD)); + printf("PCIL0_STATUS = %#06x\n", in16r(PCIL0_STATUS)); + printf("PCIL0_REVID = %#04x\n", in8(PCIL0_REVID)); + printf("PCIL0_CACHELS = %#04x\n", in8(PCIL0_CACHELS)); + printf("PCIL0_LATTIM = %#04x\n", in8(PCIL0_LATTIM)); + printf("PCIL0_HDTYPE = %#04x\n", in8(PCIL0_HDTYPE)); + printf("PCIL0_BIST = %#04x\n", in8(PCIL0_BIST)); + + printf("PCIL0_BAR0 = %#010lx\n", in32r(PCIL0_BAR0)); + printf("PCIL0_BAR1 = %#010lx\n", in32r(PCIL0_BAR1)); + printf("PCIL0_BAR2 = %#010lx\n", in32r(PCIL0_BAR2)); + printf("PCIL0_BAR3 = %#010lx\n", in32r(PCIL0_BAR3)); + printf("PCIL0_BAR4 = %#010lx\n", in32r(PCIL0_BAR4)); + printf("PCIL0_BAR5 = %#010lx\n", in32r(PCIL0_BAR5)); + + printf("PCIL0_CISPTR = %#010lx\n", in32r(PCIL0_CISPTR)); + printf("PCIL0_SBSSYSVID = %#010x\n", in16r(PCIL0_SBSYSVID)); + printf("PCIL0_SBSSYSID = %#010x\n", in16r(PCIL0_SBSYSID)); + printf("PCIL0_EROMBA = %#010lx\n", in32r(PCIL0_EROMBA)); + printf("PCIL0_CAP = %#04x\n", in8(PCIL0_CAP)); + printf("PCIL0_INTLN = %#04x\n", in8(PCIL0_INTLN)); + printf("PCIL0_INTPN = %#04x\n", in8(PCIL0_INTPN)); + printf("PCIL0_MINGNT = %#04x\n", in8(PCIL0_MINGNT)); + printf("PCIL0_MAXLTNCY = %#04x\n", in8(PCIL0_MAXLTNCY)); + + printf("PCIL0_BRDGOPT1 = %#010lx\n", in32r(PCIL0_BRDGOPT1)); + printf("PCIL0_BRDGOPT2 = %#010lx\n", in32r(PCIL0_BRDGOPT2)); + + printf("PCIL0_POM0LAL = %#010lx\n", in32r(PCIL0_POM0LAL)); + printf("PCIL0_POM0LAH = %#010lx\n", in32r(PCIL0_POM0LAH)); + printf("PCIL0_POM0SA = %#010lx\n", in32r(PCIL0_POM0SA)); + printf("PCIL0_POM0PCILAL = %#010lx\n", in32r(PCIL0_POM0PCIAL)); + printf("PCIL0_POM0PCILAH = %#010lx\n", in32r(PCIL0_POM0PCIAH)); + printf("PCIL0_POM1LAL = %#010lx\n", in32r(PCIL0_POM1LAL)); + printf("PCIL0_POM1LAH = %#010lx\n", in32r(PCIL0_POM1LAH)); + printf("PCIL0_POM1SA = %#010lx\n", in32r(PCIL0_POM1SA)); + printf("PCIL0_POM1PCILAL = %#010lx\n", in32r(PCIL0_POM1PCIAL)); + printf("PCIL0_POM1PCILAH = %#010lx\n", in32r(PCIL0_POM1PCIAH)); + printf("PCIL0_POM2SA = %#010lx\n", in32r(PCIL0_POM2SA)); + + printf("PCIL0_PIM0SA = %#010lx\n", in32r(PCIL0_PIM0SA)); + printf("PCIL0_PIM0LAL = %#010lx\n", in32r(PCIL0_PIM0LAL)); + printf("PCIL0_PIM0LAH = %#010lx\n", in32r(PCIL0_PIM0LAH)); + printf("PCIL0_PIM1SA = %#010lx\n", in32r(PCIL0_PIM1SA)); + printf("PCIL0_PIM1LAL = %#010lx\n", in32r(PCIL0_PIM1LAL)); + printf("PCIL0_PIM1LAH = %#010lx\n", in32r(PCIL0_PIM1LAH)); + printf("PCIL0_PIM2SA = %#010lx\n", in32r(PCIL0_PIM1SA)); + printf("PCIL0_PIM2LAL = %#010lx\n", in32r(PCIL0_PIM1LAL)); + printf("PCIL0_PIM2LAH = %#010lx\n", in32r(PCIL0_PIM1LAH)); + + printf("PCIL0_XSTS = %#010lx\n", in32r(PCIL0_STS)); } int do_show_xbridge_info(cmd_tbl_t * cmdtp, int flag, int argc, char *argv[]) diff --git a/board/amcc/taishan/taishan.c b/board/amcc/taishan/taishan.c index 4a0573eb38..0c20faf9ab 100644 --- a/board/amcc/taishan/taishan.c +++ b/board/amcc/taishan/taishan.c @@ -254,28 +254,28 @@ void pci_target_init(struct pci_controller * hose ) /*--------------------------------------------------------------------------+ * Disable everything *--------------------------------------------------------------------------*/ - out32r( PCIX0_PIM0SA, 0 ); /* disable */ - out32r( PCIX0_PIM1SA, 0 ); /* disable */ - out32r( PCIX0_PIM2SA, 0 ); /* disable */ - out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */ + out32r( PCIL0_PIM0SA, 0 ); /* disable */ + out32r( PCIL0_PIM1SA, 0 ); /* disable */ + out32r( PCIL0_PIM2SA, 0 ); /* disable */ + out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */ /*--------------------------------------------------------------------------+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping * options to not support sizes such as 128/256 MB. *--------------------------------------------------------------------------*/ - out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); - out32r( PCIX0_PIM0LAH, 0 ); - out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 ); + out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); + out32r( PCIL0_PIM0LAH, 0 ); + out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 ); - out32r( PCIX0_BAR0, 0 ); + out32r( PCIL0_BAR0, 0 ); /*--------------------------------------------------------------------------+ * Program the board's subsystem id/vendor id *--------------------------------------------------------------------------*/ - out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); + out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); + out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); - out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY ); + out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY ); } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ diff --git a/board/amcc/yosemite/yosemite.c b/board/amcc/yosemite/yosemite.c index 1ec13eb6b5..7ceccfa9b9 100644 --- a/board/amcc/yosemite/yosemite.c +++ b/board/amcc/yosemite/yosemite.c @@ -408,22 +408,22 @@ void pci_target_init(struct pci_controller *hose) | Use byte reversed out routines to handle endianess. | Make this region non-prefetchable. +--------------------------------------------------------------------------*/ - out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ - out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ - out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */ + out32r(PCIL0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ + out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ + out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ + out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */ + + out32r(PCIL0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ + out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ + out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ + out32r(PCIL0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */ + + out32r(PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ + out32r(PCIL0_PTM1LA, 0); /* Local Addr. Reg */ + out32r(PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ + out32r(PCIL0_PTM2LA, 0); /* Local Addr. Reg */ /*--------------------------------------------------------------------------+ * Set up Configuration registers diff --git a/board/amcc/yucca/yucca.c b/board/amcc/yucca/yucca.c index 5c9d49178c..d8f4bcbb17 100644 --- a/board/amcc/yucca/yucca.c +++ b/board/amcc/yucca/yucca.c @@ -633,27 +633,27 @@ void pci_target_init(struct pci_controller * hose ) /*-------------------------------------------------------------------+ * Disable everything *-------------------------------------------------------------------*/ - out32r( PCIX0_PIM0SA, 0 ); /* disable */ - out32r( PCIX0_PIM1SA, 0 ); /* disable */ - out32r( PCIX0_PIM2SA, 0 ); /* disable */ - out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */ + out32r( PCIL0_PIM0SA, 0 ); /* disable */ + out32r( PCIL0_PIM1SA, 0 ); /* disable */ + out32r( PCIL0_PIM2SA, 0 ); /* disable */ + out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */ /*-------------------------------------------------------------------+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 * strapping options to not support sizes such as 128/256 MB. *-------------------------------------------------------------------*/ - out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); - out32r( PCIX0_PIM0LAH, 0 ); - out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 ); - out32r( PCIX0_BAR0, 0 ); + out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); + out32r( PCIL0_PIM0LAH, 0 ); + out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 ); + out32r( PCIL0_BAR0, 0 ); /*-------------------------------------------------------------------+ * Program the board's subsystem id/vendor id *-------------------------------------------------------------------*/ - out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); + out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); + out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); - out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY ); + out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY ); } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ diff --git a/board/esd/common/cmd_loadpci.c b/board/esd/common/cmd_loadpci.c index 47e946f116..eecae0a7fd 100644 --- a/board/esd/common/cmd_loadpci.c +++ b/board/esd/common/cmd_loadpci.c @@ -48,7 +48,7 @@ int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) u32 la, ptm1la; #if defined(CONFIG_440) - ptm1la = in32r(PCIX0_PTM1LA); + ptm1la = in32r(PCIL0_PTM1LA); #else ptm1la = in32r(PTM1LA); #endif diff --git a/board/esd/du440/du440.c b/board/esd/du440/du440.c index 056f455d68..d0e52cbab3 100644 --- a/board/esd/du440/du440.c +++ b/board/esd/du440/du440.c @@ -435,26 +435,26 @@ void pci_target_init(struct pci_controller *hose) * Use byte reversed out routines to handle endianess. * Make this region non-prefetchable. */ - out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */ + out32r(PCIL0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */ /* - disabled b4 setting */ - out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, */ + out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ + out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ + out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M + No prefetching, */ /* and enable region */ - out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute */ + out32r(PCIL0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute */ /* - disabled b4 setting */ - out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ - out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ - out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, */ + out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ + out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ + out32r(PCIL0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M + No prefetching, */ /* and enable region */ - out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */ + out32r(PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ + out32r(PCIL0_PTM1LA, 0); /* Local Addr. Reg */ + out32r(PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ + out32r(PCIL0_PTM2LA, 0); /* Local Addr. Reg */ /* * Set up Configuration registers diff --git a/board/esd/pmc440/cmd_pmc440.c b/board/esd/pmc440/cmd_pmc440.c index 1af431bd7d..476e940962 100644 --- a/board/esd/pmc440/cmd_pmc440.c +++ b/board/esd/pmc440/cmd_pmc440.c @@ -497,15 +497,15 @@ int do_pmm(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]) /* map PCI address at 0xc0000000 in PLB space */ /* PMM1 Mask/Attribute - disabled b4 setting */ - out32r(PCIX0_PMM1MA, 0x00000000); + out32r(PCIL0_PMM1MA, 0x00000000); /* PMM1 Local Address */ - out32r(PCIX0_PMM1LA, 0xc0000000); + out32r(PCIL0_PMM1LA, 0xc0000000); /* PMM1 PCI Low Address */ - out32r(PCIX0_PMM1PCILA, pciaddr); + out32r(PCIL0_PMM1PCILA, pciaddr); /* PMM1 PCI High Address */ - out32r(PCIX0_PMM1PCIHA, 0x00000000); + out32r(PCIL0_PMM1PCIHA, 0x00000000); /* 256MB + No prefetching, and enable region */ - out32r(PCIX0_PMM1MA, 0xf0000001); + out32r(PCIL0_PMM1MA, 0xf0000001); } else { printf("Usage:\npmm %s\n", cmdtp->help); } diff --git a/board/esd/pmc440/pmc440.c b/board/esd/pmc440/pmc440.c index f0f9bff3eb..ec9255243c 100644 --- a/board/esd/pmc440/pmc440.c +++ b/board/esd/pmc440/pmc440.c @@ -208,7 +208,7 @@ int misc_init_f(void) if (getenv("pciearly") && (!is_monarch())) { printf("PCI: early target init\n"); - pci_setup_indirect(&hose, PCIX0_CFGADR, PCIX0_CFGDATA); + pci_setup_indirect(&hose, PCIL0_CFGADR, PCIL0_CFGDATA); pci_target_init(&hose); } return 0; @@ -568,42 +568,42 @@ void pci_target_init(struct pci_controller *hose) * Use byte reversed out routines to handle endianess. * Make this region non-prefetchable. */ - out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */ + out32r(PCIL0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */ /* - disabled b4 setting */ - out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIX0_PMM0MA, 0xc0000001); /* 1G + No prefetching, */ + out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ + out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ + out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIL0_PMM0MA, 0xc0000001); /* 1G + No prefetching, */ /* and enable region */ if (!is_monarch()) { ptmla_str = getenv("ptm1la"); ptmms_str = getenv("ptm1ms"); if(NULL != ptmla_str && NULL != ptmms_str ) { - out32r(PCIX0_PTM1MS, + out32r(PCIL0_PTM1MS, simple_strtoul(ptmms_str, NULL, 16)); - out32r(PCIX0_PTM1LA, + out32r(PCIL0_PTM1LA, simple_strtoul(ptmla_str, NULL, 16)); } else { /* BAR1: default top 64MB of RAM */ - out32r(PCIX0_PTM1MS, 0xfc000001); - out32r(PCIX0_PTM1LA, 0x0c000000); + out32r(PCIL0_PTM1MS, 0xfc000001); + out32r(PCIL0_PTM1LA, 0x0c000000); } } else { /* BAR1: default: complete 256MB RAM */ - out32r(PCIX0_PTM1MS, 0xf0000001); - out32r(PCIX0_PTM1LA, 0x00000000); + out32r(PCIL0_PTM1MS, 0xf0000001); + out32r(PCIL0_PTM1LA, 0x00000000); } ptmla_str = getenv("ptm2la"); /* Local Addr. Reg */ ptmms_str = getenv("ptm2ms"); /* Memory Size/Attribute */ if(NULL != ptmla_str && NULL != ptmms_str ) { - out32r(PCIX0_PTM2MS, simple_strtoul(ptmms_str, NULL, 16)); - out32r(PCIX0_PTM2LA, simple_strtoul(ptmla_str, NULL, 16)); + out32r(PCIL0_PTM2MS, simple_strtoul(ptmms_str, NULL, 16)); + out32r(PCIL0_PTM2LA, simple_strtoul(ptmla_str, NULL, 16)); } else { /* BAR2: default: 4MB FPGA */ - out32r(PCIX0_PTM2MS, 0xffc00001); /* Memory Size/Attribute */ - out32r(PCIX0_PTM2LA, 0xef000000); /* Local Addr. Reg */ + out32r(PCIL0_PTM2MS, 0xffc00001); /* Memory Size/Attribute */ + out32r(PCIL0_PTM2LA, 0xef000000); /* Local Addr. Reg */ } if (is_monarch()) { diff --git a/board/exbitgen/init.S b/board/exbitgen/init.S index 7a9726fe78..721aaac3e7 100644 --- a/board/exbitgen/init.S +++ b/board/exbitgen/init.S @@ -52,7 +52,7 @@ #define IIC_EXTSTS (I2C_REGISTERS_BASE_ADDRESS+IICEXTSTS) #define IIC_LSADR (I2C_REGISTERS_BASE_ADDRESS+IICLSADR) #define IIC_HSADR (I2C_REGISTERS_BASE_ADDRESS+IICHSADR) -#define IIC_CLKDIV (I2C_REGISTERS_BASE_ADDRESS+IICCLKDIV) +#define IIC_CLKDIV (I2C_REGISTERS_BASE_ADDRESS+IIC0_CLKDIV) #define IIC_INTRMSK (I2C_REGISTERS_BASE_ADDRESS+IICINTRMSK) #define IIC_XFRCNT (I2C_REGISTERS_BASE_ADDRESS+IICXFRCNT) #define IIC_XTCNTLSS (I2C_REGISTERS_BASE_ADDRESS+IICXTCNTLSS) @@ -537,7 +537,7 @@ read_spd: WRITE_I2C(IICHSADR, 0x00) /* clear hi slave address */ WRITE_I2C(IICSTS, 0x08) /* update status register */ WRITE_I2C(IICEXTSTS, 0x8f) - WRITE_I2C(IICCLKDIV, 0x05) + WRITE_I2C(IIC0_CLKDIV, 0x05) WRITE_I2C(IICINTRMSK, 0x00) /* no interrupts */ WRITE_I2C(IICXFRCNT, 0x00) /* clear transfer count */ WRITE_I2C(IICXTCNTLSS, 0xf0) /* clear extended control & stat */ diff --git a/board/gdsys/gdppc440etx/gdppc440etx.c b/board/gdsys/gdppc440etx/gdppc440etx.c index 7cc1bf2678..90dbe52aa2 100644 --- a/board/gdsys/gdppc440etx/gdppc440etx.c +++ b/board/gdsys/gdppc440etx/gdppc440etx.c @@ -239,22 +239,22 @@ void pci_target_init(struct pci_controller *hose) * Use byte reversed out routines to handle endianess. * Make this region non-prefetchable. */ - out32r(PCIX0_PMM0MA, 0x00000000); /* disabled b4 setting */ - out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); - out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); - out32r(PCIX0_PMM0PCIHA, 0x00000000); - out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M, no prefetch, enable region */ - - out32r(PCIX0_PMM1MA, 0x00000000); /* disabled b4 setting */ - out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); - out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); - out32r(PCIX0_PMM1PCIHA, 0x00000000); - out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M, no prefetch, enable region */ - - out32r(PCIX0_PTM1MS, 0x00000001); - out32r(PCIX0_PTM1LA, 0); - out32r(PCIX0_PTM2MS, 0); - out32r(PCIX0_PTM2LA, 0); + out32r(PCIL0_PMM0MA, 0x00000000); /* disabled b4 setting */ + out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); + out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); + out32r(PCIL0_PMM0PCIHA, 0x00000000); + out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M, no prefetch, enable region */ + + out32r(PCIL0_PMM1MA, 0x00000000); /* disabled b4 setting */ + out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); + out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); + out32r(PCIL0_PMM1PCIHA, 0x00000000); + out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M, no prefetch, enable region */ + + out32r(PCIL0_PTM1MS, 0x00000001); + out32r(PCIL0_PTM1LA, 0); + out32r(PCIL0_PTM2MS, 0); + out32r(PCIL0_PTM2LA, 0); /* * Set up Configuration registers diff --git a/board/gdsys/intip/intip.c b/board/gdsys/intip/intip.c index 2cd2e6d450..b42e90853f 100644 --- a/board/gdsys/intip/intip.c +++ b/board/gdsys/intip/intip.c @@ -154,27 +154,27 @@ void pci_target_init(struct pci_controller *hose) /* * Disable everything */ - out_le32((void *)PCIX0_PIM0SA, 0); /* disable */ - out_le32((void *)PCIX0_PIM1SA, 0); /* disable */ - out_le32((void *)PCIX0_PIM2SA, 0); /* disable */ - out_le32((void *)PCIX0_EROMBA, 0); /* disable expansion rom */ + out_le32((void *)PCIL0_PIM0SA, 0); /* disable */ + out_le32((void *)PCIL0_PIM1SA, 0); /* disable */ + out_le32((void *)PCIL0_PIM2SA, 0); /* disable */ + out_le32((void *)PCIL0_EROMBA, 0); /* disable expansion rom */ /* * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 * strapping options to not support sizes such as 128/256 MB. */ - out_le32((void *)PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); - out_le32((void *)PCIX0_PIM0LAH, 0); - out_le32((void *)PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1); - out_le32((void *)PCIX0_BAR0, 0); + out_le32((void *)PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); + out_le32((void *)PCIL0_PIM0LAH, 0); + out_le32((void *)PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1); + out_le32((void *)PCIL0_BAR0, 0); /* * Program the board's subsystem id/vendor id */ - out_le16((void *)PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); - out_le16((void *)PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); + out_le16((void *)PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); + out_le16((void *)PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); - out_le16((void *)PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY); + out_le16((void *)PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY); } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ diff --git a/board/korat/korat.c b/board/korat/korat.c index 40a097cef5..8c674a2095 100644 --- a/board/korat/korat.c +++ b/board/korat/korat.c @@ -679,29 +679,29 @@ void pci_target_init(struct pci_controller *hose) * Use byte reversed out routines to handle endianess. * Make this region non-prefetchable. */ - out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */ + out32r(PCIL0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute */ /* - disabled b4 setting */ - out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIX0_PMM0PCILA, + out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ + out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, */ + out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M + No prefetching, */ /* and enable region */ - out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute */ + out32r(PCIL0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute */ /* - disabled b4 setting */ - out32r(PCIX0_PMM1LA, + out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE + 0x20000000); /* PMM0 Local Address */ - out32r(PCIX0_PMM1PCILA, + out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE + 0x20000000); /* PMM0 PCI Low Address */ - out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, */ + out32r(PCIL0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M + No prefetching, */ /* and enable region */ - out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */ + out32r(PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ + out32r(PCIL0_PTM1LA, 0); /* Local Addr. Reg */ + out32r(PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ + out32r(PCIL0_PTM2LA, 0); /* Local Addr. Reg */ /* * Set up Configuration registers diff --git a/board/lwmon5/lwmon5.c b/board/lwmon5/lwmon5.c index f4090f40dd..ef7f2e8dc5 100644 --- a/board/lwmon5/lwmon5.c +++ b/board/lwmon5/lwmon5.c @@ -351,22 +351,22 @@ void pci_target_init(struct pci_controller *hose) | Use byte reversed out routines to handle endianess. | Make this region non-prefetchable. +--------------------------------------------------------------------------*/ - out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ - out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ - out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */ + out32r(PCIL0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ + out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ + out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ + out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */ + + out32r(PCIL0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ + out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ + out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ + out32r(PCIL0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */ + + out32r(PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ + out32r(PCIL0_PTM1LA, 0); /* Local Addr. Reg */ + out32r(PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ + out32r(PCIL0_PTM2LA, 0); /* Local Addr. Reg */ /*--------------------------------------------------------------------------+ * Set up Configuration registers diff --git a/board/netstal/hcu5/hcu5.c b/board/netstal/hcu5/hcu5.c index 4522612dae..946c3f3a4d 100644 --- a/board/netstal/hcu5/hcu5.c +++ b/board/netstal/hcu5/hcu5.c @@ -398,27 +398,27 @@ void pci_target_init(struct pci_controller *hose) * Make this region non-prefetchable. */ /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIX0_PMM0MA, 0x00000000); - out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ + out32r(PCIL0_PMM0MA, 0x00000000); + out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ /* PMM0 PCI Low Address */ - out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); - out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); + out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ /* 512M + No prefetching, and enable region */ - out32r(PCIX0_PMM0MA, 0xE0000001); + out32r(PCIL0_PMM0MA, 0xE0000001); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIX0_PMM1MA, 0x00000000); - out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ + out32r(PCIL0_PMM1MA, 0x00000000); + out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ /* PMM0 PCI Low Address */ - out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); - out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); + out32r(PCIL0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ /* 512M + No prefetching, and enable region */ - out32r(PCIX0_PMM1MA, 0xE0000001); + out32r(PCIL0_PMM1MA, 0xE0000001); - out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */ + out32r(PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ + out32r(PCIL0_PTM1LA, 0); /* Local Addr. Reg */ + out32r(PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ + out32r(PCIL0_PTM2LA, 0); /* Local Addr. Reg */ /* * Set up Configuration registers diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c index ac059a903b..b70827e0cc 100644 --- a/board/pcs440ep/pcs440ep.c +++ b/board/pcs440ep/pcs440ep.c @@ -626,22 +626,22 @@ void pci_target_init(struct pci_controller *hose) | Use byte reversed out routines to handle endianess. | Make this region non-prefetchable. +--------------------------------------------------------------------------*/ - out32r(PCIX0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIX0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIX0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIX0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIX0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIX0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ - out32r(PCIX0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ - out32r(PCIX0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ - out32r(PCIX0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIX0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */ - - out32r(PCIX0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ - out32r(PCIX0_PTM1LA, 0); /* Local Addr. Reg */ - out32r(PCIX0_PTM2MS, 0); /* Memory Size/Attribute */ - out32r(PCIX0_PTM2LA, 0); /* Local Addr. Reg */ + out32r(PCIL0_PMM0MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ + out32r(PCIL0_PMM0LA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ + out32r(PCIL0_PMM0PCILA, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ + out32r(PCIL0_PMM0PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIL0_PMM0MA, 0xE0000001); /* 512M + No prefetching, and enable region */ + + out32r(PCIL0_PMM1MA, 0x00000000); /* PMM0 Mask/Attribute - disabled b4 setting */ + out32r(PCIL0_PMM1LA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ + out32r(PCIL0_PMM1PCILA, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ + out32r(PCIL0_PMM1PCIHA, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIL0_PMM1MA, 0xE0000001); /* 512M + No prefetching, and enable region */ + + out32r(PCIL0_PTM1MS, 0x00000001); /* Memory Size/Attribute */ + out32r(PCIL0_PTM1LA, 0); /* Local Addr. Reg */ + out32r(PCIL0_PTM2MS, 0); /* Memory Size/Attribute */ + out32r(PCIL0_PTM2LA, 0); /* Local Addr. Reg */ /*--------------------------------------------------------------------------+ * Set up Configuration registers diff --git a/board/prodrive/alpr/alpr.c b/board/prodrive/alpr/alpr.c index cdb91ac36b..51335c4d9c 100644 --- a/board/prodrive/alpr/alpr.c +++ b/board/prodrive/alpr/alpr.c @@ -192,28 +192,28 @@ void pci_target_init(struct pci_controller * hose ) /*--------------------------------------------------------------------------+ * Disable everything *--------------------------------------------------------------------------*/ - out32r( PCIX0_PIM0SA, 0 ); /* disable */ - out32r( PCIX0_PIM1SA, 0 ); /* disable */ - out32r( PCIX0_PIM2SA, 0 ); /* disable */ - out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */ + out32r( PCIL0_PIM0SA, 0 ); /* disable */ + out32r( PCIL0_PIM1SA, 0 ); /* disable */ + out32r( PCIL0_PIM2SA, 0 ); /* disable */ + out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */ /*--------------------------------------------------------------------------+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping * options to not support sizes such as 128/256 MB. *--------------------------------------------------------------------------*/ - out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); - out32r( PCIX0_PIM0LAH, 0 ); - out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 ); + out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); + out32r( PCIL0_PIM0LAH, 0 ); + out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 ); - out32r( PCIX0_BAR0, 0 ); + out32r( PCIL0_BAR0, 0 ); /*--------------------------------------------------------------------------+ * Program the board's subsystem id/vendor id *--------------------------------------------------------------------------*/ - out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); + out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); + out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); - out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); + out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ @@ -270,21 +270,21 @@ void pci_master_init(struct pci_controller *hose) | Use byte reversed out routines to handle endianess. | Make this region non-prefetchable. +--------------------------------------------------------------------------*/ - out32r( PCIX0_POM0SA, 0 ); /* disable */ - out32r( PCIX0_POM1SA, 0 ); /* disable */ - out32r( PCIX0_POM2SA, 0 ); /* disable */ - - out32r(PCIX0_POM0LAL, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ - out32r(PCIX0_POM0LAH, 0x00000003); /* PMM0 Local Address */ - out32r(PCIX0_POM0PCIAL, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ - out32r(PCIX0_POM0PCIAH, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIX0_POM0SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */ - - out32r(PCIX0_POM1LAL, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ - out32r(PCIX0_POM1LAH, 0x00000003); /* PMM0 Local Address */ - out32r(PCIX0_POM1PCIAL, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ - out32r(PCIX0_POM1PCIAH, 0x00000000); /* PMM0 PCI High Address */ - out32r(PCIX0_POM1SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */ + out32r( PCIL0_POM0SA, 0 ); /* disable */ + out32r( PCIL0_POM1SA, 0 ); /* disable */ + out32r( PCIL0_POM2SA, 0 ); /* disable */ + + out32r(PCIL0_POM0LAL, CONFIG_SYS_PCI_MEMBASE); /* PMM0 Local Address */ + out32r(PCIL0_POM0LAH, 0x00000003); /* PMM0 Local Address */ + out32r(PCIL0_POM0PCIAL, CONFIG_SYS_PCI_MEMBASE); /* PMM0 PCI Low Address */ + out32r(PCIL0_POM0PCIAH, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIL0_POM0SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */ + + out32r(PCIL0_POM1LAL, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 Local Address */ + out32r(PCIL0_POM1LAH, 0x00000003); /* PMM0 Local Address */ + out32r(PCIL0_POM1PCIAL, CONFIG_SYS_PCI_MEMBASE2); /* PMM0 PCI Low Address */ + out32r(PCIL0_POM1PCIAH, 0x00000000); /* PMM0 PCI High Address */ + out32r(PCIL0_POM1SA, ~(0x10000000 - 1) | 1); /* 256MB + enable region */ } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_MASTER_INIT) */ diff --git a/board/prodrive/p3p440/p3p440.c b/board/prodrive/p3p440/p3p440.c index 20fd4dc276..9a07852760 100644 --- a/board/prodrive/p3p440/p3p440.c +++ b/board/prodrive/p3p440/p3p440.c @@ -209,28 +209,28 @@ void pci_target_init(struct pci_controller *hose) /*--------------------------------------------------------------------------+ * Disable everything *--------------------------------------------------------------------------*/ - out32r(PCIX0_PIM0SA, 0); /* disable */ - out32r(PCIX0_PIM1SA, 0); /* disable */ - out32r(PCIX0_PIM2SA, 0); /* disable */ - out32r(PCIX0_EROMBA, 0); /* disable expansion rom */ + out32r(PCIL0_PIM0SA, 0); /* disable */ + out32r(PCIL0_PIM1SA, 0); /* disable */ + out32r(PCIL0_PIM2SA, 0); /* disable */ + out32r(PCIL0_EROMBA, 0); /* disable expansion rom */ /*--------------------------------------------------------------------------+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping * options to not support sizes such as 128/256 MB. *--------------------------------------------------------------------------*/ - out32r(PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); - out32r(PCIX0_PIM0LAH, 0); - out32r(PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1); + out32r(PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); + out32r(PCIL0_PIM0LAH, 0); + out32r(PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1); - out32r(PCIX0_BAR0, 0); + out32r(PCIL0_BAR0, 0); /*--------------------------------------------------------------------------+ * Program the board's subsystem id/vendor id *--------------------------------------------------------------------------*/ - out16r(PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); - out16r(PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); + out16r(PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); + out16r(PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); - out16r(PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY); + out16r(PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY); } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ diff --git a/board/sandburst/common/ppc440gx_i2c.h b/board/sandburst/common/ppc440gx_i2c.h index 328abd64b8..90f27caa0d 100644 --- a/board/sandburst/common/ppc440gx_i2c.h +++ b/board/sandburst/common/ppc440gx_i2c.h @@ -44,7 +44,7 @@ #define IIC_EXTSTS1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICEXTSTS) #define IIC_LSADR1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICLSADR) #define IIC_HSADR1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICHSADR) -#define IIC_CLKDIV1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICCLKDIV) +#define IIC_CLKDIV1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IIC0_CLKDIV) #define IIC_INTRMSK1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICINTRMSK) #define IIC_XFRCNT1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICXFRCNT) #define IIC_XTCNTLSS1 (I2C_REGISTERS_BUS1_BASE_ADDRESS+IICXTCNTLSS) diff --git a/board/sandburst/common/sb_common.c b/board/sandburst/common/sb_common.c index e1c61463dd..a484874ea3 100644 --- a/board/sandburst/common/sb_common.c +++ b/board/sandburst/common/sb_common.c @@ -346,28 +346,28 @@ void pci_target_init(struct pci_controller * hose ) /*--------------------------------------------------------------------------+ * Disable everything *--------------------------------------------------------------------------*/ - out32r( PCIX0_PIM0SA, 0 ); /* disable */ - out32r( PCIX0_PIM1SA, 0 ); /* disable */ - out32r( PCIX0_PIM2SA, 0 ); /* disable */ - out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */ + out32r( PCIL0_PIM0SA, 0 ); /* disable */ + out32r( PCIL0_PIM1SA, 0 ); /* disable */ + out32r( PCIL0_PIM2SA, 0 ); /* disable */ + out32r( PCIL0_EROMBA, 0 ); /* disable expansion rom */ /*--------------------------------------------------------------------------+ * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping * options to not support sizes such as 128/256 MB. *--------------------------------------------------------------------------*/ - out32r( PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); - out32r( PCIX0_PIM0LAH, 0 ); - out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 ); + out32r( PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE ); + out32r( PCIL0_PIM0LAH, 0 ); + out32r( PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1 ); - out32r( PCIX0_BAR0, 0 ); + out32r( PCIL0_BAR0, 0 ); /*--------------------------------------------------------------------------+ * Program the board's subsystem id/vendor id *--------------------------------------------------------------------------*/ - out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); + out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); + out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID ); - out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY ); + out16r( PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY ); } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ diff --git a/board/xes/xpedite1000/xpedite1000.c b/board/xes/xpedite1000/xpedite1000.c index 011fb94bb6..04949bb2d4 100644 --- a/board/xes/xpedite1000/xpedite1000.c +++ b/board/xes/xpedite1000/xpedite1000.c @@ -156,7 +156,7 @@ int pci_pre_init(struct pci_controller * hose) return 0; #if defined(CONFIG_SYS_PCI_FORCE_PCI_CONV) - /* Setup System Device Register PCIX0_XCR */ + /* Setup System Device Register PCIL0_XCR */ mfsdr(SDR0_XCR, strap); strap &= 0x0f000000; mtsdr(SDR0_XCR, strap); @@ -175,26 +175,26 @@ int pci_pre_init(struct pci_controller * hose) void pci_target_init(struct pci_controller * hose) { /* Disable everything */ - out32r(PCIX0_PIM0SA, 0); - out32r(PCIX0_PIM1SA, 0); - out32r(PCIX0_PIM2SA, 0); - out32r(PCIX0_EROMBA, 0); /* disable expansion rom */ + out32r(PCIL0_PIM0SA, 0); + out32r(PCIL0_PIM1SA, 0); + out32r(PCIL0_PIM2SA, 0); + out32r(PCIL0_EROMBA, 0); /* disable expansion rom */ /* * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping * options to not support sizes such as 128/256 MB. */ - out32r(PCIX0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); - out32r(PCIX0_PIM0LAH, 0); - out32r(PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1); + out32r(PCIL0_PIM0LAL, CONFIG_SYS_SDRAM_BASE); + out32r(PCIL0_PIM0LAH, 0); + out32r(PCIL0_PIM0SA, ~(gd->ram_size - 1) | 1); - out32r(PCIX0_BAR0, 0); + out32r(PCIL0_BAR0, 0); /* Program the board's subsystem id/vendor id */ - out16r(PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); - out16r(PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); + out16r(PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID); + out16r(PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_DEVICEID); - out16r(PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY); + out16r(PCIL0_CMD, in16r(PCIL0_CMD) | PCI_COMMAND_MEMORY); } #endif /* defined(CONFIG_PCI) && defined(CONFIG_SYS_PCI_TARGET_INIT) */ diff --git a/cpu/ppc4xx/4xx_pci.c b/cpu/ppc4xx/4xx_pci.c index e97f32c7b0..fa521f0415 100644 --- a/cpu/ppc4xx/4xx_pci.c +++ b/cpu/ppc4xx/4xx_pci.c @@ -518,7 +518,7 @@ int pci_440_init (struct pci_controller *hose) /* PCI I/O space */ pci_set_region(hose->regions + reg_num++, 0x00000000, - PCIX0_IOBASE, + PCIL0_IOBASE, 0x10000, PCI_REGION_IO); @@ -545,7 +545,7 @@ int pci_440_init (struct pci_controller *hose) hose->region_count = reg_num; - pci_setup_indirect(hose, PCIX0_CFGADR, PCIX0_CFGDATA); + pci_setup_indirect(hose, PCIL0_CFGADR, PCIL0_CFGDATA); /* Let board change/modify hose & do initial checks */ if (pci_pre_init (hose) == 0) { @@ -562,18 +562,18 @@ int pci_440_init (struct pci_controller *hose) #if defined(CONFIG_SYS_PCI_TARGET_INIT) pci_target_init(hose); /* Let board setup pci target */ #else - out16r( PCIX0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); - out16r( PCIX0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_ID ); - out16r( PCIX0_CLS, 0x00060000 ); /* Bridge, host bridge */ + out16r( PCIL0_SBSYSVID, CONFIG_SYS_PCI_SUBSYS_VENDORID ); + out16r( PCIL0_SBSYSID, CONFIG_SYS_PCI_SUBSYS_ID ); + out16r( PCIL0_CLS, 0x00060000 ); /* Bridge, host bridge */ #endif #if defined(CONFIG_440GX) || defined(CONFIG_440SPE) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) - out32r( PCIX0_BRDGOPT1, 0x04000060 ); /* PLB Rq pri highest */ - out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1 */ -#elif defined(PCIX0_BRDGOPT1) - out32r( PCIX0_BRDGOPT1, 0x10000060 ); /* PLB Rq pri highest */ - out32r( PCIX0_BRDGOPT2, in32(PCIX0_BRDGOPT2) | 1 ); /* Enable host config */ + out32r( PCIL0_BRDGOPT1, 0x04000060 ); /* PLB Rq pri highest */ + out32r( PCIL0_BRDGOPT2, in32(PCIL0_BRDGOPT2) | 0x83 ); /* Enable host config, clear Timeout, ensure int src1 */ +#elif defined(PCIL0_BRDGOPT1) + out32r( PCIL0_BRDGOPT1, 0x10000060 ); /* PLB Rq pri highest */ + out32r( PCIL0_BRDGOPT2, in32(PCIL0_BRDGOPT2) | 1 ); /* Enable host config */ #endif /*--------------------------------------------------------------------------+ @@ -583,23 +583,23 @@ int pci_440_init (struct pci_controller *hose) #if defined(CONFIG_SYS_PCI_MASTER_INIT) pci_master_init(hose); /* Let board setup pci master */ #else - out32r( PCIX0_POM0SA, 0 ); /* disable */ - out32r( PCIX0_POM1SA, 0 ); /* disable */ - out32r( PCIX0_POM2SA, 0 ); /* disable */ + out32r( PCIL0_POM0SA, 0 ); /* disable */ + out32r( PCIL0_POM1SA, 0 ); /* disable */ + out32r( PCIL0_POM2SA, 0 ); /* disable */ #if defined(CONFIG_440SPE) - out32r( PCIX0_POM0LAL, 0x10000000 ); - out32r( PCIX0_POM0LAH, 0x0000000c ); + out32r( PCIL0_POM0LAL, 0x10000000 ); + out32r( PCIL0_POM0LAH, 0x0000000c ); #elif defined(CONFIG_460EX) || defined(CONFIG_460GT) - out32r( PCIX0_POM0LAL, 0x20000000 ); - out32r( PCIX0_POM0LAH, 0x0000000c ); + out32r( PCIL0_POM0LAL, 0x20000000 ); + out32r( PCIL0_POM0LAH, 0x0000000c ); #else - out32r( PCIX0_POM0LAL, 0x00000000 ); - out32r( PCIX0_POM0LAH, 0x00000003 ); + out32r( PCIL0_POM0LAL, 0x00000000 ); + out32r( PCIL0_POM0LAH, 0x00000003 ); #endif - out32r( PCIX0_POM0PCIAL, CONFIG_SYS_PCI_MEMBASE ); - out32r( PCIX0_POM0PCIAH, 0x00000000 ); - out32r( PCIX0_POM0SA, 0xf0000001 ); /* 256MB, enabled */ - out32r( PCIX0_STS, in32r( PCIX0_STS ) & ~0x0000fff8 ); + out32r( PCIL0_POM0PCIAL, CONFIG_SYS_PCI_MEMBASE ); + out32r( PCIL0_POM0PCIAH, 0x00000000 ); + out32r( PCIL0_POM0SA, 0xf0000001 ); /* 256MB, enabled */ + out32r( PCIL0_STS, in32r( PCIL0_STS ) & ~0x0000fff8 ); #endif /*--------------------------------------------------------------------------+ @@ -614,7 +614,7 @@ int pci_440_init (struct pci_controller *hose) #endif #if !defined(CONFIG_440EP) && !defined(CONFIG_440GR) && \ !defined(CONFIG_440EPX) && !defined(CONFIG_440GRX) - out16r( PCIX0_CMD, in16r( PCIX0_CMD ) | PCI_COMMAND_MASTER); + out16r( PCIL0_CMD, in16r( PCIL0_CMD ) | PCI_COMMAND_MASTER); #endif hose->last_busno = pci_hose_scan(hose); } diff --git a/cpu/ppc4xx/cpu_init.c b/cpu/ppc4xx/cpu_init.c index bd06b9bc22..a00da408c9 100644 --- a/cpu/ppc4xx/cpu_init.c +++ b/cpu/ppc4xx/cpu_init.c @@ -58,13 +58,13 @@ void reconfigure_pll(u32 new_cpu_freq) target_perdv0 = 4; target_spcid0 = 4; - mfcpr(CPR0_PRIMBD, reg); + mfcpr(CPR0_PRIMBD0, reg); temp = (reg & PRBDV_MASK) >> 24; prbdv0 = temp ? temp : 8; if (prbdv0 != target_prbdv0) { reg &= ~PRBDV_MASK; reg |= ((target_prbdv0 == 8 ? 0 : target_prbdv0) << 24); - mtcpr(CPR0_PRIMBD, reg); + mtcpr(CPR0_PRIMBD0, reg); reset_needed = 1; } diff --git a/cpu/ppc4xx/miiphy.c b/cpu/ppc4xx/miiphy.c index fa3bfc8d9f..22ed5c25ea 100644 --- a/cpu/ppc4xx/miiphy.c +++ b/cpu/ppc4xx/miiphy.c @@ -195,7 +195,7 @@ unsigned int miiphy_getemac_offset(u8 addr) unsigned long eoffset; /* Need to find out which mdi port we're using */ - zmii = in_be32((void *)ZMII_FER); + zmii = in_be32((void *)ZMII0_FER); if (zmii & (ZMII_FER_MDI << ZMII_FER_V (0))) /* using port 0 */ @@ -217,12 +217,12 @@ unsigned int miiphy_getemac_offset(u8 addr) /* None of the mdi ports are enabled! */ /* enable port 0 */ zmii |= ZMII_FER_MDI << ZMII_FER_V (0); - out_be32((void *)ZMII_FER, zmii); + out_be32((void *)ZMII0_FER, zmii); eoffset = 0; /* need to soft reset port 0 */ - zmii = in_be32((void *)EMAC_M0); - zmii |= EMAC_M0_SRST; - out_be32((void *)EMAC_M0, zmii); + zmii = in_be32((void *)EMAC0_MR0); + zmii |= EMAC_MR0_SRST; + out_be32((void *)EMAC0_MR0, zmii); } return (eoffset); @@ -243,19 +243,19 @@ unsigned int miiphy_getemac_offset(u8 addr) switch (addr) { #if defined(CONFIG_HAS_ETH1) && defined(CONFIG_GPCS_PHY1_ADDR) case CONFIG_GPCS_PHY1_ADDR: - if (addr == EMAC_M1_IPPA_GET(in_be32((void *)EMAC_M1 + 0x100))) + if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x100))) eoffset = 0x100; break; #endif #if defined(CONFIG_HAS_ETH2) && defined(CONFIG_GPCS_PHY2_ADDR) case CONFIG_GPCS_PHY2_ADDR: - if (addr == EMAC_M1_IPPA_GET(in_be32((void *)EMAC_M1 + 0x300))) + if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x300))) eoffset = 0x300; break; #endif #if defined(CONFIG_HAS_ETH3) && defined(CONFIG_GPCS_PHY3_ADDR) case CONFIG_GPCS_PHY3_ADDR: - if (addr == EMAC_M1_IPPA_GET(in_be32((void *)EMAC_M1 + 0x400))) + if (addr == EMAC_MR1_IPPA_GET(in_be32((void *)EMAC0_MR1 + 0x400))) eoffset = 0x400; break; #endif @@ -278,9 +278,9 @@ static int emac_miiphy_wait(u32 emac_reg) /* wait for completion */ i = 0; do { - sta_reg = in_be32((void *)EMAC_STACR + emac_reg); + sta_reg = in_be32((void *)EMAC0_STACR + emac_reg); if (i++ > 5) { - debug("%s [%d]: Timeout! EMAC_STACR=0x%0x\n", __func__, + debug("%s [%d]: Timeout! EMAC0_STACR=0x%0x\n", __func__, __LINE__, sta_reg); return -1; } @@ -324,7 +324,7 @@ static int emac_miiphy_command(u8 addr, u8 reg, int cmd, u16 value) if (cmd == EMAC_STACR_WRITE) memcpy(&sta_reg, &value, 2); /* put in data */ - out_be32((void *)EMAC_STACR + emac_reg, sta_reg); + out_be32((void *)EMAC0_STACR + emac_reg, sta_reg); debug("%s [%d]: sta_reg=%08x\n", __func__, __LINE__, sta_reg); /* wait for completion */ @@ -349,7 +349,7 @@ int emac4xx_miiphy_read (char *devname, unsigned char addr, unsigned char reg, if (emac_miiphy_command(addr, reg, EMAC_STACR_READ, 0) != 0) return -1; - sta_reg = in_be32((void *)EMAC_STACR + emac_reg); + sta_reg = in_be32((void *)EMAC0_STACR + emac_reg); *value = sta_reg >> 16; return 0; diff --git a/cpu/ppc4xx/speed.c b/cpu/ppc4xx/speed.c index 988ba9742d..906face033 100644 --- a/cpu/ppc4xx/speed.c +++ b/cpu/ppc4xx/speed.c @@ -334,7 +334,7 @@ void get_sys_info (sys_info_t *sysInfo) sysInfo->pllFbkDiv = temp ? temp : 32; lfdiv = reg & PLLD_LFBDV_MASK; - mfcpr(CPR0_OPBD, reg); + mfcpr(CPR0_OPBD0, reg); temp = (reg & OPBDDV_MASK) >> 24; sysInfo->pllOpbDiv = temp ? temp : 4; @@ -342,7 +342,7 @@ void get_sys_info (sys_info_t *sysInfo) temp = (reg & PERDV_MASK) >> 24; sysInfo->pllExtBusDiv = temp ? temp : 8; - mfcpr(CPR0_PRIMBD, reg); + mfcpr(CPR0_PRIMBD0, reg); temp = (reg & PRBDV_MASK) >> 24; prbdv0 = temp ? temp : 8; @@ -1050,7 +1050,7 @@ void get_sys_info (sys_info_t * sysInfo) /* * Determine OPBDV0 */ - mfcpr(CPR0_OPBD, tmp); + mfcpr(CPR0_OPBD0, tmp); tmp = (tmp >> 24) & 0x03; sysInfo->pllOpbDiv = (tmp == 0) ? 4 : tmp; diff --git a/drivers/net/4xx_enet.c b/drivers/net/4xx_enet.c index f2c9be0dd3..2fac64167b 100644 --- a/drivers/net/4xx_enet.c +++ b/drivers/net/4xx_enet.c @@ -44,7 +44,7 @@ * RX descriptor address up to the next cache line boundary. * 16-Jan-00 Added support for booting with IP of 0x0 MKW * 15-Mar-00 Updated enetInit() to enable broadcast addresses in the - * EMAC_RXM register. JWB + * EMAC0_RXM register. JWB * 12-Mar-01 anne-sophie.harnois@nextream.fr * - Variables are compatible with those already defined in * include/net.h @@ -58,7 +58,7 @@ * 08-May-01 stefan.roese@esd-electronics.com * - MAL error handling added (eth_init called again) * 13-Nov-01 stefan.roese@esd-electronics.com - * - Set IST bit in EMAC_M1 reg upon 100MBit or full duplex + * - Set IST bit in EMAC0_MR1 reg upon 100MBit or full duplex * 04-Jan-02 stefan.roese@esd-electronics.com * - Wait for PHY auto negotiation to complete added * 06-Feb-02 stefan.roese@esd-electronics.com @@ -359,7 +359,7 @@ static void ppc_4xx_eth_halt (struct eth_device *dev) EMAC_4XX_HW_PST hw_p = dev->priv; u32 val = 10000; - out_be32((void *)EMAC_IER + hw_p->hw_addr, 0x00000000); /* disable emac interrupts */ + out_be32((void *)EMAC0_IER + hw_p->hw_addr, 0x00000000); /* disable emac interrupts */ /* 1st reset MAL channel */ /* Note: writing a 0 to a channel has no effect */ @@ -382,7 +382,7 @@ static void ppc_4xx_eth_halt (struct eth_device *dev) emac_loopback_enable(hw_p); /* EMAC RESET */ - out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST); + out_be32((void *)EMAC0_MR0 + hw_p->hw_addr, EMAC_MR0_SRST); /* remove clocks for EMAC internal loopback */ emac_loopback_disable(hw_p); @@ -485,7 +485,7 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) /* Ensure we setup mdio for this devnum and ONLY this devnum */ zmiifer |= (ZMII_FER_MDI) << ZMII_FER_V(devnum); - out_be32((void *)ZMII_FER, zmiifer); + out_be32((void *)ZMII0_FER, zmiifer); out_be32((void *)RGMII_FER, rmiifer); return ((int)pfc1); @@ -504,21 +504,21 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) switch (pfc1) { case SDR0_PFC1_SELECT_CONFIG_2: /* 1 x GMII port */ - out_be32((void *)ZMII_FER, 0x00); + out_be32((void *)ZMII0_FER, 0x00); out_be32((void *)RGMII_FER, 0x00000037); bis->bi_phymode[0] = BI_PHYMODE_GMII; bis->bi_phymode[1] = BI_PHYMODE_NONE; break; case SDR0_PFC1_SELECT_CONFIG_4: /* 2 x RGMII ports */ - out_be32((void *)ZMII_FER, 0x00); + out_be32((void *)ZMII0_FER, 0x00); out_be32((void *)RGMII_FER, 0x00000055); bis->bi_phymode[0] = BI_PHYMODE_RGMII; bis->bi_phymode[1] = BI_PHYMODE_RGMII; break; case SDR0_PFC1_SELECT_CONFIG_6: /* 2 x SMII ports */ - out_be32((void *)ZMII_FER, + out_be32((void *)ZMII0_FER, ((ZMII_FER_SMII) << ZMII_FER_V(0)) | ((ZMII_FER_SMII) << ZMII_FER_V(1))); out_be32((void *)RGMII_FER, 0x00000000); @@ -527,7 +527,7 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) break; case SDR0_PFC1_SELECT_CONFIG_1_2: /* only 1 x MII supported */ - out_be32((void *)ZMII_FER, (ZMII_FER_MII) << ZMII_FER_V(0)); + out_be32((void *)ZMII0_FER, (ZMII_FER_MII) << ZMII_FER_V(0)); out_be32((void *)RGMII_FER, 0x00000000); bis->bi_phymode[0] = BI_PHYMODE_MII; bis->bi_phymode[1] = BI_PHYMODE_NONE; @@ -537,9 +537,9 @@ int ppc_4xx_eth_setup_bridge(int devnum, bd_t * bis) } /* Ensure we setup mdio for this devnum and ONLY this devnum */ - zmiifer = in_be32((void *)ZMII_FER); + zmiifer = in_be32((void *)ZMII0_FER); zmiifer |= (ZMII_FER_MDI) << ZMII_FER_V(devnum); - out_be32((void *)ZMII_FER, zmiifer); + out_be32((void *)ZMII0_FER, zmiifer); return ((int)0x0); } @@ -953,18 +953,18 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) /* NOTE: Therefore, disable all other EMACS, since we handle */ /* NOTE: only one emac at a time */ reg = 0; - out_be32((void *)ZMII_FER, 0); + out_be32((void *)ZMII0_FER, 0); udelay (100); #if defined(CONFIG_440GP) || defined(CONFIG_440EP) || defined(CONFIG_440GR) - out_be32((void *)ZMII_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum)); + out_be32((void *)ZMII0_FER, (ZMII_FER_RMII | ZMII_FER_MDI) << ZMII_FER_V (devnum)); #elif defined(CONFIG_440GX) || \ defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \ defined(CONFIG_460EX) || defined(CONFIG_460GT) ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis); #endif - out_be32((void *)ZMII_SSR, ZMII_SSR_SP << ZMII_SSR_V(devnum)); + out_be32((void *)ZMII0_SSR, ZMII0_SSR_SP << ZMII0_SSR_V(devnum)); #endif /* defined(CONFIG_440) && !defined(CONFIG_440SP) */ #if defined(CONFIG_405EX) ethgroup = ppc_4xx_eth_setup_bridge(devnum, bis); @@ -976,13 +976,13 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) emac_loopback_enable(hw_p); /* EMAC RESET */ - out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_SRST); + out_be32((void *)EMAC0_MR0 + hw_p->hw_addr, EMAC_MR0_SRST); /* remove clocks for EMAC internal loopback */ emac_loopback_disable(hw_p); failsafe = 1000; - while ((in_be32((void *)EMAC_M0 + hw_p->hw_addr) & (EMAC_M0_SRST)) && failsafe) { + while ((in_be32((void *)EMAC0_MR0 + hw_p->hw_addr) & (EMAC_MR0_SRST)) && failsafe) { udelay (1000); failsafe--; } @@ -1000,15 +1000,15 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) opbfreq = sysinfo.freqOPB / 1000000; if (opbfreq <= 50); else if (opbfreq <= 66) - mode_reg |= EMAC_M1_OBCI_66; + mode_reg |= EMAC_MR1_OBCI_66; else if (opbfreq <= 83) - mode_reg |= EMAC_M1_OBCI_83; + mode_reg |= EMAC_MR1_OBCI_83; else if (opbfreq <= 100) - mode_reg |= EMAC_M1_OBCI_100; + mode_reg |= EMAC_MR1_OBCI_100; else - mode_reg |= EMAC_M1_OBCI_GT100; + mode_reg |= EMAC_MR1_OBCI_GT100; - out_be32((void *)EMAC_M1 + hw_p->hw_addr, mode_reg); + out_be32((void *)EMAC0_MR1 + hw_p->hw_addr, mode_reg); #endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */ #if defined(CONFIG_GPCS_PHY_ADDR) || defined(CONFIG_GPCS_PHY1_ADDR) || \ @@ -1041,9 +1041,9 @@ static int ppc_4xx_eth_init (struct eth_device *dev, bd_t * bis) #endif } - mode_reg = in_be32((void *)EMAC_M1 + hw_p->hw_addr); - mode_reg |= EMAC_M1_MF_1000GPCS | EMAC_M1_IPPA_SET(reg); - out_be32((void *)EMAC_M1 + hw_p->hw_addr, mode_reg); + mode_reg = in_be32((void *)EMAC0_MR1 + hw_p->hw_addr); + mode_reg |= EMAC_MR1_MF_1000GPCS | EMAC_MR1_IPPA_SET(reg); + out_be32((void *)EMAC0_MR1 + hw_p->hw_addr, mode_reg); /* Configure GPCS interface to recommended setting for SGMII */ miiphy_reset(dev->name, reg); @@ -1250,11 +1250,11 @@ get_speed: #endif /* Set ZMII/RGMII speed according to the phy link speed */ - reg = in_be32((void *)ZMII_SSR); + reg = in_be32((void *)ZMII0_SSR); if ( (speed == 100) || (speed == 1000) ) - out_be32((void *)ZMII_SSR, reg | (ZMII_SSR_SP << ZMII_SSR_V (devnum))); + out_be32((void *)ZMII0_SSR, reg | (ZMII0_SSR_SP << ZMII0_SSR_V (devnum))); else - out_be32((void *)ZMII_SSR, reg & (~(ZMII_SSR_SP << ZMII_SSR_V (devnum)))); + out_be32((void *)ZMII0_SSR, reg & (~(ZMII0_SSR_SP << ZMII0_SSR_V (devnum)))); if ((devnum == 2) || (devnum == 3)) { if (speed == 1000) @@ -1381,7 +1381,7 @@ get_speed: reg = reg << 8; reg |= dev->enetaddr[1]; - out_be32((void *)EMAC_IAH + hw_p->hw_addr, reg); + out_be32((void *)EMAC0_IAH + hw_p->hw_addr, reg); reg = 0x00000000; reg |= dev->enetaddr[2]; /* set low address */ @@ -1392,7 +1392,7 @@ get_speed: reg = reg << 8; reg |= dev->enetaddr[5]; - out_be32((void *)EMAC_IAL + hw_p->hw_addr, reg); + out_be32((void *)EMAC0_IAL + hw_p->hw_addr, reg); switch (devnum) { case 1: @@ -1480,9 +1480,9 @@ get_speed: mtdcr (MAL0_RXCASR, (MAL_TXRX_CASR >> hw_p->devnum)); /* set transmit enable & receive enable */ - out_be32((void *)EMAC_M0 + hw_p->hw_addr, EMAC_M0_TXE | EMAC_M0_RXE); + out_be32((void *)EMAC0_MR0 + hw_p->hw_addr, EMAC_MR0_TXE | EMAC_MR0_RXE); - mode_reg = in_be32((void *)EMAC_M1 + hw_p->hw_addr); + mode_reg = in_be32((void *)EMAC0_MR1 + hw_p->hw_addr); /* set rx-/tx-fifo size */ mode_reg = (mode_reg & ~EMAC_MR1_FIFO_MASK) | EMAC_MR1_FIFO_SIZE; @@ -1497,47 +1497,47 @@ get_speed: pfc1 |= SDR0_PFC1_EM_1000; mtsdr (SDR0_PFC1, pfc1); #endif - mode_reg = mode_reg | EMAC_M1_MF_1000MBPS | EMAC_M1_IST; + mode_reg = mode_reg | EMAC_MR1_MF_1000MBPS | EMAC_MR1_IST; } else if (speed == _100BASET) - mode_reg = mode_reg | EMAC_M1_MF_100MBPS | EMAC_M1_IST; + mode_reg = mode_reg | EMAC_MR1_MF_100MBPS | EMAC_MR1_IST; else mode_reg = mode_reg & ~0x00C00000; /* 10 MBPS */ if (duplex == FULL) - mode_reg = mode_reg | 0x80000000 | EMAC_M1_IST; + mode_reg = mode_reg | 0x80000000 | EMAC_MR1_IST; - out_be32((void *)EMAC_M1 + hw_p->hw_addr, mode_reg); + out_be32((void *)EMAC0_MR1 + hw_p->hw_addr, mode_reg); /* Enable broadcast and indvidual address */ /* TBS: enabling runts as some misbehaved nics will send runts */ - out_be32((void *)EMAC_RXM + hw_p->hw_addr, EMAC_RMR_BAE | EMAC_RMR_IAE); + out_be32((void *)EMAC0_RXM + hw_p->hw_addr, EMAC_RMR_BAE | EMAC_RMR_IAE); /* we probably need to set the tx mode1 reg? maybe at tx time */ /* set transmit request threshold register */ - out_be32((void *)EMAC_TRTR + hw_p->hw_addr, 0x18000000); /* 256 byte threshold */ + out_be32((void *)EMAC0_TRTR + hw_p->hw_addr, 0x18000000); /* 256 byte threshold */ /* set receive low/high water mark register */ #if defined(CONFIG_440) /* 440s has a 64 byte burst length */ - out_be32((void *)EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x80009000); + out_be32((void *)EMAC0_RX_HI_LO_WMARK + hw_p->hw_addr, 0x80009000); #else /* 405s have a 16 byte burst length */ - out_be32((void *)EMAC_RX_HI_LO_WMARK + hw_p->hw_addr, 0x0f002000); + out_be32((void *)EMAC0_RX_HI_LO_WMARK + hw_p->hw_addr, 0x0f002000); #endif /* defined(CONFIG_440) */ - out_be32((void *)EMAC_TXM1 + hw_p->hw_addr, 0xf8640000); + out_be32((void *)EMAC0_TMR1 + hw_p->hw_addr, 0xf8640000); /* Set fifo limit entry in tx mode 0 */ - out_be32((void *)EMAC_TXM0 + hw_p->hw_addr, 0x00000003); + out_be32((void *)EMAC0_TMR0 + hw_p->hw_addr, 0x00000003); /* Frame gap set */ - out_be32((void *)EMAC_I_FRAME_GAP_REG + hw_p->hw_addr, 0x00000008); + out_be32((void *)EMAC0_I_FRAME_GAP_REG + hw_p->hw_addr, 0x00000008); /* Set EMAC IER */ hw_p->emac_ier = EMAC_ISR_PTLE | EMAC_ISR_BFCS | EMAC_ISR_ORE | EMAC_ISR_IRE; if (speed == _100BASET) hw_p->emac_ier = hw_p->emac_ier | EMAC_ISR_SYE; - out_be32((void *)EMAC_ISR + hw_p->hw_addr, 0xffffffff); /* clear pending interrupts */ - out_be32((void *)EMAC_IER + hw_p->hw_addr, hw_p->emac_ier); + out_be32((void *)EMAC0_ISR + hw_p->hw_addr, 0xffffffff); /* clear pending interrupts */ + out_be32((void *)EMAC0_IER + hw_p->hw_addr, hw_p->emac_ier); if (hw_p->first_init == 0) { /* @@ -1596,8 +1596,8 @@ static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr, sync(); - out_be32((void *)EMAC_TXM0 + hw_p->hw_addr, - in_be32((void *)EMAC_TXM0 + hw_p->hw_addr) | EMAC_TXM0_GNP0); + out_be32((void *)EMAC0_TMR0 + hw_p->hw_addr, + in_be32((void *)EMAC0_TMR0 + hw_p->hw_addr) | EMAC_TMR0_GNP0); #ifdef INFO_4XX_ENET hw_p->stats.pkts_tx++; #endif @@ -1607,9 +1607,9 @@ static int ppc_4xx_eth_send (struct eth_device *dev, volatile void *ptr, *-----------------------------------------------------------------------*/ time_start = get_timer (0); while (1) { - temp_txm0 = in_be32((void *)EMAC_TXM0 + hw_p->hw_addr); + temp_txm0 = in_be32((void *)EMAC0_TMR0 + hw_p->hw_addr); /* loop until either TINT turns on or 3 seconds elapse */ - if ((temp_txm0 & EMAC_TXM0_GNP0) != 0) { + if ((temp_txm0 & EMAC_TMR0_GNP0) != 0) { /* transmit is done, so now check for errors * If there is an error, an interrupt should * happen when we return @@ -1678,7 +1678,7 @@ int enetInt (struct eth_device *dev) /* look for EMAC errors */ if ((uic_emac & UIC_ETHx) || (uic_emac_b & UIC_ETHxB)) { - emac_isr = in_be32((void *)EMAC_ISR + hw_p->hw_addr); + emac_isr = in_be32((void *)EMAC0_ISR + hw_p->hw_addr); emac_err(dev, emac_isr); /* clear EMAC error interrupt status bits */ @@ -1761,7 +1761,7 @@ static void emac_err (struct eth_device *dev, unsigned long isr) EMAC_4XX_HW_PST hw_p = dev->priv; printf ("EMAC%d error occured.... ISR = %lx\n", hw_p->devnum, isr); - out_be32((void *)EMAC_ISR + hw_p->hw_addr, isr); + out_be32((void *)EMAC0_ISR + hw_p->hw_addr, isr); } /*-----------------------------------------------------------------------------+ diff --git a/post/cpu/ppc4xx/ether.c b/post/cpu/ppc4xx/ether.c index c3665da94a..a58db04e49 100644 --- a/post/cpu/ppc4xx/ether.c +++ b/post/cpu/ppc4xx/ether.c @@ -115,11 +115,11 @@ static void ether_post_init (int devnum, int hw_addr) sync (); #endif /* reset emac */ - out_be32 ((void*)(EMAC_M0 + hw_addr), EMAC_M0_SRST); + out_be32 ((void*)(EMAC0_MR0 + hw_addr), EMAC_MR0_SRST); sync (); for (i = 0;; i++) { - if (!(in_be32 ((void*)(EMAC_M0 + hw_addr)) & EMAC_M0_SRST)) + if (!(in_be32 ((void*)(EMAC0_MR0 + hw_addr)) & EMAC_MR0_SRST)) break; if (i >= 1000) { printf ("Timeout resetting EMAC\n"); @@ -134,15 +134,15 @@ static void ether_post_init (int devnum, int hw_addr) mode_reg = 0x0; if (sysinfo.freqOPB <= 50000000); else if (sysinfo.freqOPB <= 66666667) - mode_reg |= EMAC_M1_OBCI_66; + mode_reg |= EMAC_MR1_OBCI_66; else if (sysinfo.freqOPB <= 83333333) - mode_reg |= EMAC_M1_OBCI_83; + mode_reg |= EMAC_MR1_OBCI_83; else if (sysinfo.freqOPB <= 100000000) - mode_reg |= EMAC_M1_OBCI_100; + mode_reg |= EMAC_MR1_OBCI_100; else - mode_reg |= EMAC_M1_OBCI_GT100; + mode_reg |= EMAC_MR1_OBCI_GT100; - out_be32 ((void*)(EMAC_M1 + hw_addr), mode_reg); + out_be32 ((void*)(EMAC0_MR1 + hw_addr), mode_reg); #endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */ @@ -210,40 +210,40 @@ static void ether_post_init (int devnum, int hw_addr) /* set internal loopback mode */ #ifdef CONFIG_SYS_POST_ETHER_EXT_LOOPBACK - out_be32 ((void*)(EMAC_M1 + hw_addr), EMAC_M1_FDE | 0 | - EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K | - EMAC_M1_MF_100MBPS | EMAC_M1_IST | - in_be32 ((void*)(EMAC_M1 + hw_addr))); + out_be32 ((void*)(EMAC0_MR1 + hw_addr), EMAC_MR1_FDE | 0 | + EMAC_MR1_RFS_4K | EMAC_MR1_TX_FIFO_2K | + EMAC_MR1_MF_100MBPS | EMAC_MR1_IST | + in_be32 ((void*)(EMAC0_MR1 + hw_addr))); #else - out_be32 ((void*)(EMAC_M1 + hw_addr), EMAC_M1_FDE | EMAC_M1_ILE | - EMAC_M1_RFS_4K | EMAC_M1_TX_FIFO_2K | - EMAC_M1_MF_100MBPS | EMAC_M1_IST | - in_be32 ((void*)(EMAC_M1 + hw_addr))); + out_be32 ((void*)(EMAC0_MR1 + hw_addr), EMAC_MR1_FDE | EMAC_MR1_ILE | + EMAC_MR1_RFS_4K | EMAC_MR1_TX_FIFO_2K | + EMAC_MR1_MF_100MBPS | EMAC_MR1_IST | + in_be32 ((void*)(EMAC0_MR1 + hw_addr))); #endif /* set transmit enable & receive enable */ - out_be32 ((void*)(EMAC_M0 + hw_addr), EMAC_M0_TXE | EMAC_M0_RXE); + out_be32 ((void*)(EMAC0_MR0 + hw_addr), EMAC_MR0_TXE | EMAC_MR0_RXE); /* enable broadcast address */ - out_be32 ((void*)(EMAC_RXM + hw_addr), EMAC_RMR_BAE); + out_be32 ((void*)(EMAC0_RXM + hw_addr), EMAC_RMR_BAE); /* set transmit request threshold register */ - out_be32 ((void*)(EMAC_TRTR + hw_addr), 0x18000000); /* 256 byte threshold */ + out_be32 ((void*)(EMAC0_TRTR + hw_addr), 0x18000000); /* 256 byte threshold */ /* set receive low/high water mark register */ #if defined(CONFIG_440) /* 440s has a 64 byte burst length */ - out_be32 ((void*)(EMAC_RX_HI_LO_WMARK + hw_addr), 0x80009000); + out_be32 ((void*)(EMAC0_RX_HI_LO_WMARK + hw_addr), 0x80009000); #else /* 405s have a 16 byte burst length */ - out_be32 ((void*)(EMAC_RX_HI_LO_WMARK + hw_addr), 0x0f002000); + out_be32 ((void*)(EMAC0_RX_HI_LO_WMARK + hw_addr), 0x0f002000); #endif /* defined(CONFIG_440) */ - out_be32 ((void*)(EMAC_TXM1 + hw_addr), 0xf8640000); + out_be32 ((void*)(EMAC0_TMR1 + hw_addr), 0xf8640000); /* Set fifo limit entry in tx mode 0 */ - out_be32 ((void*)(EMAC_TXM0 + hw_addr), 0x00000003); + out_be32 ((void*)(EMAC0_TMR0 + hw_addr), 0x00000003); /* Frame gap set */ - out_be32 ((void*)(EMAC_I_FRAME_GAP_REG + hw_addr), 0x00000008); + out_be32 ((void*)(EMAC0_I_FRAME_GAP_REG + hw_addr), 0x00000008); sync (); } @@ -270,7 +270,7 @@ static void ether_post_halt (int devnum, int hw_addr) udelay (1000); } /* emac reset */ - out_be32 ((void*)(EMAC_M0 + hw_addr), EMAC_M0_SRST); + out_be32 ((void*)(EMAC0_MR0 + hw_addr), EMAC_MR0_SRST); #if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX) /* remove clocks for EMAC internal loopback */ @@ -300,7 +300,7 @@ static void ether_post_send (int devnum, int hw_addr, void *packet, int length) flush_dcache_range((u32)tx.data_ptr, (u32)tx.data_ptr + length); sync (); - out_be32 ((void*)(EMAC_TXM0 + hw_addr), in_be32 ((void*)(EMAC_TXM0 + hw_addr)) | EMAC_TXM0_GNP0); + out_be32 ((void*)(EMAC0_TMR0 + hw_addr), in_be32 ((void*)(EMAC0_TMR0 + hw_addr)) | EMAC_TMR0_GNP0); sync (); } -- 2.30.2