From dd7304ec6d5dee0901dad760749625cb05953593 Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Fri, 9 Apr 2010 08:40:14 +0000 Subject: [PATCH] ar71xx: update phy masks for the Planex boards This avoids probing of the AR8216 chip on the eth0 interface. Cc: backfire@openwrt.org SVN-Revision: 20754 --- .../linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w04nu.c | 7 +++++-- .../linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c | 7 +++++-- 2 files changed, 10 insertions(+), 4 deletions(-) diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w04nu.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w04nu.c index 42d0f81e6a..bc8438f73f 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w04nu.c +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w04nu.c @@ -126,13 +126,16 @@ static struct gpio_button mzk_w04nu_gpio_buttons[] __initdata = { } }; +#define MZK_W04NU_WAN_PHYMASK BIT(4) +#define MZK_W04NU_MDIO_MASK (~MZK_W04NU_WAN_PHYMASK) + static void __init mzk_w04nu_setup(void) { u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); ar71xx_set_mac_base(eeprom); - ar71xx_add_device_mdio(0x0); + ar71xx_add_device_mdio(MZK_W04NU_MDIO_MASK); ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ar71xx_eth0_data.speed = SPEED_100; @@ -140,7 +143,7 @@ static void __init mzk_w04nu_setup(void) ar71xx_eth0_data.has_ar8216 = 1; ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth1_data.phy_mask = 0x10; + ar71xx_eth1_data.phy_mask = MZK_W04NU_WAN_PHYMASK; ar71xx_add_device_eth(0); ar71xx_add_device_eth(1); diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c index ed431d824c..dfe7d0d6f9 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c @@ -125,13 +125,16 @@ static struct gpio_button mzk_w300nh_gpio_buttons[] __initdata = { } }; +#define MZK_W300NH_WAN_PHYMASK BIT(4) +#define MZK_W300NH_MDIO_MASK (~MZK_W300NH_WAN_PHYMASK) + static void __init mzk_w300nh_setup(void) { u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); ar71xx_set_mac_base(eeprom); - ar71xx_add_device_mdio(0x0); + ar71xx_add_device_mdio(MZK_W300NH_MDIO_MASK); ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; ar71xx_eth0_data.speed = SPEED_100; @@ -139,7 +142,7 @@ static void __init mzk_w300nh_setup(void) ar71xx_eth0_data.has_ar8216 = 1; ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth1_data.phy_mask = 0x10; + ar71xx_eth1_data.phy_mask = MZK_W300NH_WAN_PHYMASK; ar71xx_add_device_eth(0); ar71xx_add_device_eth(1); -- 2.30.2