From db66b157db0379ed7dd0dece537135d4c6df9eba Mon Sep 17 00:00:00 2001 From: Mathias Kresin Date: Thu, 26 May 2016 23:11:17 +0200 Subject: [PATCH] lantiq: VGV7510KW22 - enable the IP101A phy The RJ45 WAN port is used for xDSL as well as the IP101A. The pins 1,2,3,6 of the RJ45 are connected to the IP101A and the pins 4,5 are connected to the xdsl chip. Drop the ip101a-rst node. It can't be controlled and is not required at all. Signed-off-by: Mathias Kresin --- target/linux/lantiq/dts/VGV7510KW22.dtsi | 27 ++++++++++++++++++----- target/linux/lantiq/xrx200/config-default | 1 + 2 files changed, 23 insertions(+), 5 deletions(-) diff --git a/target/linux/lantiq/dts/VGV7510KW22.dtsi b/target/linux/lantiq/dts/VGV7510KW22.dtsi index ed3a6e8d78..1abdc20b1d 100644 --- a/target/linux/lantiq/dts/VGV7510KW22.dtsi +++ b/target/linux/lantiq/dts/VGV7510KW22.dtsi @@ -49,11 +49,6 @@ pinctrl-0 = <&state_default>; state_default: pinmux { - ip101a-rst { - lantiq,pins = "io46"; - lantiq,output = <0>; - lantiq,pull = <1>; - }; gphy-leds { lantiq,groups = "gphy0 led0", "gphy0 led1", "gphy1 led0", "gphy1 led1"; @@ -213,11 +208,33 @@ }; }; + wan: interface@1 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + mtd-mac-address = <&boardconfig 0x16>; + mtd-mac-address-increment = <2>; + lantiq,wan; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "mii"; + phy-handle = <&phy1>; + }; + }; + mdio@0 { #address-cells = <1>; #size-cells = <0>; compatible = "lantiq,xrx200-mdio"; + phy1: ethernet-phy@1 { + reg = <0x1>; + compatible = "ethernet-phy-id0243.0c54", "ethernet-phy-ieee802.3-c22"; + }; + phy11: ethernet-phy@11 { reg = <0x11>; compatible = "lantiq,phy22f", "ethernet-phy-ieee802.3-c22"; diff --git a/target/linux/lantiq/xrx200/config-default b/target/linux/lantiq/xrx200/config-default index 1c9f5ccb13..745a9ff10d 100644 --- a/target/linux/lantiq/xrx200/config-default +++ b/target/linux/lantiq/xrx200/config-default @@ -23,6 +23,7 @@ CONFIG_HAVE_DEBUG_STACKOVERFLOW=y CONFIG_HAVE_DMA_CONTIGUOUS=y CONFIG_HAVE_SYSCALL_TRACEPOINTS=y CONFIG_HZ_PERIODIC=y +CONFIG_ICPLUS_PHY=y CONFIG_INPUT=y CONFIG_INPUT_EVDEV=y CONFIG_INPUT_POLLDEV=y -- 2.30.2