From db5b0304fc9d268f5fae26482e144b3767979bb2 Mon Sep 17 00:00:00 2001 From: wdenk Date: Tue, 23 Jan 2001 21:22:09 +0000 Subject: [PATCH] Initial revision --- board/cogent/flash.h | 305 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 305 insertions(+) create mode 100644 board/cogent/flash.h diff --git a/board/cogent/flash.h b/board/cogent/flash.h new file mode 100644 index 0000000000..0b8d6aaef6 --- /dev/null +++ b/board/cogent/flash.h @@ -0,0 +1,305 @@ +/**************** DEFINES for Intel 28F008S5 FLASH chip **********************/ + +/* register addresses, valid only following a I8S5_CMD_RD_ID command */ +#define I8S5_ADDR_MAN 0x00000 /* manufacturer's id */ +#define I8S5_ADDR_DEV 0x00001 /* device id */ +#define I8S5_ADDR_CFGM 0x00003 /* master lock configuration */ +#define I8S5_ADDR_CFG(b) (((b)<<16)|2) /* block lock configuration */ + +/* Commands */ +#define I8S5_CMD_RST 0xFF /* reset flash */ +#define I8S5_CMD_RD_ID 0x90 /* read the id and lock bits */ +#define I8S5_CMD_RD_STAT 0x70 /* read the status register */ +#define I8S5_CMD_CLR_STAT 0x50 /* clear the staus register */ +#define I8S5_CMD_ERASE1 0x20 /* first word for block erase */ +#define I8S5_CMD_ERASE2 0xD0 /* second word for block erase */ +#define I8S5_CMD_PROG 0x40 /* program word command */ +#define I8S5_CMD_LOCK 0x60 /* first word for all lock commands */ +#define I8S5_CMD_SET_LOCK_BLK 0x01 /* 2nd word for set block lock bit */ +#define I8S5_CMD_SET_LOCK_MSTR 0xF1 /* 2nd word for set master lock bit */ +#define I8S5_CMD_CLR_LOCK_BLK 0xD0 /* 2nd word for clear block lock bit */ + +/* status register bits */ +#define I8S5_STAT_DPS 0x02 /* Device Protect Status */ +#define I8S5_STAT_PSS 0x04 /* Program Suspend Status */ +#define I8S5_STAT_VPPS 0x08 /* VPP Status */ +#define I8S5_STAT_PSLBS 0x10 /* Program and Set Lock Bit Status */ +#define I8S5_STAT_ECLBS 0x20 /* Erase and Clear Lock Bit Status */ +#define I8S5_STAT_ESS 0x40 /* Erase Suspend Status */ +#define I8S5_STAT_RDY 0x80 /* Write State Machine Status, 1=rdy */ + +#define I8S5_STAT_ERR (I8S5_STAT_VPPS | I8S5_STAT_DPS | \ + I8S5_STAT_ECLBS | I8S5_STAT_PSLBS) + +/* ID and Lock Configuration */ +#define I8S5_RD_ID_LOCK 0x01 /* Bit 0 of each byte */ +#define I8S5_RD_ID_MAN 0x89 /* Manufacturer code = 0x89 */ +#define I8S5_RD_ID_DEV 0xA6 /* Device code = 0xA6, 28F008S5 */ + +/* dimensions */ +#define I8S5_NBLOCKS 16 /* a 28F008S5 consists of 16 blocks */ +#define I8S5_BLKSZ (64*1024) /* of 64Kbyte each */ +#define I8S5_SIZE (I8S5_BLKSZ * I8S5_NBLOCKS) + +/**************** DEFINES for Intel 28F800B5 FLASH chip **********************/ + +/* register addresses, valid only following a I8S5_CMD_RD_ID command */ +#define I8B5_ADDR_MAN 0x00000 /* manufacturer's id */ +#define I8B5_ADDR_DEV 0x00001 /* device id */ + +/* Commands */ +#define I8B5_CMD_RST 0xFF /* reset flash */ +#define I8B5_CMD_RD_ID 0x90 /* read the id and lock bits */ +#define I8B5_CMD_RD_STAT 0x70 /* read the status register */ +#define I8B5_CMD_CLR_STAT 0x50 /* clear the staus register */ +#define I8B5_CMD_ERASE1 0x20 /* first word for block erase */ +#define I8B5_CMD_ERASE2 0xD0 /* second word for block erase */ +#define I8B5_CMD_PROG 0x40 /* program word command */ + +/* status register bits */ +#define I8B5_STAT_VPPS 0x08 /* VPP Status */ +#define I8B5_STAT_DWS 0x10 /* Program and Set Lock Bit Status */ +#define I8B5_STAT_ES 0x20 /* Erase and Clear Lock Bit Status */ +#define I8B5_STAT_ESS 0x40 /* Erase Suspend Status */ +#define I8B5_STAT_RDY 0x80 /* Write State Machine Status, 1=rdy */ + +#define I8B5_STAT_ERR (I8B5_STAT_VPPS | I8B5_STAT_DWS | I8B5_STAT_ES) + +/* ID Configuration */ +#define I8B5_RD_ID_MAN 0x89 /* Manufacturer code = 0x89 */ +#define I8B5_RD_ID_DEV1 0x889D /* Device code = 0x889D, 28F800B5 */ + +/* dimensions */ +#define I8B5_NBLOCKS 8 /* a 28F008S5 consists of 16 blocks */ +#define I8B5_BLKSZ (128*1024) /* of 64Kbyte each */ +#define I8B5_SIZE (I8B5_BLKSZ * I8B5_NBLOCKS) + +/****************** DEFINES for Cogent CMA302 Flash **************************/ + +/* + * Quoted from the CMA302 manual: + * + * Although the CMA302 supports 64-bit reads, all writes must be done with + * word size only. When programming the CMA302, the FLASH devices appear as 2 + * banks of interleaved, 32-bit wide FLASH. Each 32-bit word consists of four + * 28F008S5 devices. The first bank is accessed when the word address is even, + * while the second bank is accessed when the word address is odd. This must + * be taken into account when programming the desired word. Also, when locking + * blocks, software must lock both banks. The CMA302 does not directly support + * byte writing. Programming and/or erasing individual bytes is done with + * selective use of the Write Command. By not placing the Write Command value + * on a particular byte lane, that byte will not be written with the following + * Write Data. Also, remember that within a byte lane (i.e. D0-7), there are + * two 28F008S5 devices, one for each bank or every other word. + * + * End quote. + * + * Each 28F008S5 is 8Mbit, with 8 bit wide data. i.e. each is 1Mbyte. The + * chips are arranged on the CMA302 in multiples of two banks, each bank having + * 4 chips. Each bank must be accessed as a single 32 bit wide device (i.e. + * aligned on a 32 bit boundary), with each byte lane within the 32 bits (0-3) + * going to each of the 4 chips and the word address selecting the bank, even + * being the low bank and odd the high bank. For 64bit reads, both banks are + * read simultaneously with the second bank on byte lanes 4-7. Each 28F008S5 + * consists of 16 64Kbyte "block"s. Before programming a byte, the block that + * the byte resides within must be erased. So if you want to program contiguous + * memory locations, you must erase all 8 chips at the same time. i.e. the + * flash on the CMA302 can be viewed as a number of 512Kbyte blocks. + * + * Note: I am going to treat banks as 8 Mbytes (1Meg of 64bit words), whereas + * the example code treats them as a pair of interleaved 1 Mbyte x 32bit banks. + */ + +typedef unsigned long c302f_word_t; /* 32 or 64 bit unsigned integer */ +typedef volatile c302f_word_t *c302f_addr_t; +typedef unsigned long c302f_size_t; /* want this big - at least 32 bit */ + +/* layout of banks on cma302 board */ +#define C302F_BNK_WIDTH 8 /* each bank is 8 chips wide */ +#define C302F_BNK_WSHIFT 3 /* log base 2 of C302F_BNK_WIDTH */ +#define C302F_BNK_NBLOCKS I8S5_NBLOCKS +#define C302F_BNK_BLKSZ (I8S5_BLKSZ * C302F_BNK_WIDTH) +#define C302F_BNK_SIZE (I8S5_SIZE * C302F_BNK_WIDTH) + +#define C302F_MAX_BANKS 2 /* up to 2 banks (8M each) on CMA302 */ + +/* align addresses and sizes to bank boundaries */ +#define C302F_BNK_ADDR_ALIGN(a) ((c302f_addr_t)((c302f_size_t)(a) \ + & ~(C302F_BNK_WIDTH - 1))) +#define C302F_BNK_SIZE_ALIGN(s) ((c302f_size_t)C302F_BNK_ADDR_ALIGN( \ + (c302f_size_t)(s) + (C302F_BNK_WIDTH - 1))) + +/* align addresses and sizes to block boundaries */ +#define C302F_BLK_ADDR_ALIGN(a) ((c302f_addr_t)((c302f_size_t)(a) \ + & ~(C302F_BNK_BLKSZ - 1))) +#define C302F_BLK_SIZE_ALIGN(s) ((c302f_size_t)C302F_BLK_ADDR_ALIGN( \ + (c302f_size_t)(s) + (C302F_BNK_BLKSZ - 1))) + +/* add a byte offset to a flash address */ +#define C302F_ADDR_ADD_BYTEOFF(a,o) \ + (c302f_addr_t)((c302f_size_t)(a) + (o)) + +/* get base address of bank b, given flash base address a */ +#define C302F_BNK_ADDR_BASE(a,b) \ + C302F_ADDR_ADD_BYTEOFF((a), \ + (c302f_size_t)(b) * C302F_BNK_SIZE) + +/* adjust an address a (within a bank) to next word, block or bank */ +#define C302F_BNK_ADDR_NEXT_WORD(a) \ + C302F_ADDR_ADD_BYTEOFF((a), C302F_BNK_WIDTH) +#define C302F_BNK_ADDR_NEXT_BLK(a) \ + C302F_ADDR_ADD_BYTEOFF((a), C302F_BNK_BLKSZ) +#define C302F_BNK_ADDR_NEXT_BNK(a) \ + C302F_ADDR_ADD_BYTEOFF((a), C302F_BNK_SIZE) + +/* get bank address of chip register r given a bank base address a */ +#define C302F_BNK_ADDR_I8S5REG(a,r) \ + C302F_ADDR_ADD_BYTEOFF((a), \ + (r) << C302F_BNK_WSHIFT) + +/* make a bank representation for each chip address */ + +#define C302F_BNK_ADDR_MAN(a) C302F_BNK_ADDR_I8S5REG((a), I8S5_ADDR_MAN) +#define C302F_BNK_ADDR_DEV(a) C302F_BNK_ADDR_I8S5REG((a), I8S5_ADDR_DEV) +#define C302F_BNK_ADDR_CFGM(a) C302F_BNK_ADDR_I8S5REG((a), I8S5_ADDR_CFGM) +#define C302F_BNK_ADDR_CFG(b,a) C302F_BNK_ADDR_I8S5REG((a), I8S5_ADDR_CFG(b)) + +/* + * replicate a chip cmd/stat/rd value into each byte position within a word + * so that multiple chips are accessed in a single word i/o operation + * + * this must be as wide as the c302f_word_t type + */ +#define C302F_FILL_WORD(o) (((unsigned long)(o) << 24) | \ + ((unsigned long)(o) << 16) | \ + ((unsigned long)(o) << 8) | \ + (unsigned long)(o)) + +/* make a bank representation for each chip cmd/stat/rd value */ + +/* Commands */ +#define C302F_BNK_CMD_RST C302F_FILL_WORD(I8S5_CMD_RST) +#define C302F_BNK_CMD_RD_ID C302F_FILL_WORD(I8S5_CMD_RD_ID) +#define C302F_BNK_CMD_RD_STAT C302F_FILL_WORD(I8S5_CMD_RD_STAT) +#define C302F_BNK_CMD_CLR_STAT C302F_FILL_WORD(I8S5_CMD_CLR_STAT) +#define C302F_BNK_CMD_ERASE1 C302F_FILL_WORD(I8S5_CMD_ERASE1) +#define C302F_BNK_CMD_ERASE2 C302F_FILL_WORD(I8S5_CMD_ERASE2) +#define C302F_BNK_CMD_PROG C302F_FILL_WORD(I8S5_CMD_PROG) +#define C302F_BNK_CMD_LOCK C302F_FILL_WORD(I8S5_CMD_LOCK) +#define C302F_BNK_CMD_SET_LOCK_BLK C302F_FILL_WORD(I8S5_CMD_SET_LOCK_BLK) +#define C302F_BNK_CMD_SET_LOCK_MSTR C302F_FILL_WORD(I8S5_CMD_SET_LOCK_MSTR) +#define C302F_BNK_CMD_CLR_LOCK_BLK C302F_FILL_WORD(I8S5_CMD_CLR_LOCK_BLK) + +/* status register bits */ +#define C302F_BNK_STAT_DPS C302F_FILL_WORD(I8S5_STAT_DPS) +#define C302F_BNK_STAT_PSS C302F_FILL_WORD(I8S5_STAT_PSS) +#define C302F_BNK_STAT_VPPS C302F_FILL_WORD(I8S5_STAT_VPPS) +#define C302F_BNK_STAT_PSLBS C302F_FILL_WORD(I8S5_STAT_PSLBS) +#define C302F_BNK_STAT_ECLBS C302F_FILL_WORD(I8S5_STAT_ECLBS) +#define C302F_BNK_STAT_ESS C302F_FILL_WORD(I8S5_STAT_ESS) +#define C302F_BNK_STAT_RDY C302F_FILL_WORD(I8S5_STAT_RDY) + +#define C302F_BNK_STAT_ERR C302F_FILL_WORD(I8S5_STAT_ERR) + +/* ID and Lock Configuration */ +#define C302F_BNK_RD_ID_LOCK C302F_FILL_WORD(I8S5_RD_ID_LOCK) +#define C302F_BNK_RD_ID_MAN C302F_FILL_WORD(I8S5_RD_ID_MAN) +#define C302F_BNK_RD_ID_DEV C302F_FILL_WORD(I8S5_RD_ID_DEV) + +/*************** DEFINES for Cogent Motherboard Flash ************************/ + +typedef unsigned short cmbf_word_t; /* 16 bit unsigned integer */ +typedef volatile cmbf_word_t *cmbf_addr_t; +typedef unsigned long cmbf_size_t; /* want this big - at least 32 bit */ + +/* layout of banks on cogent motherboard - only 1 bank, 16 bit wide */ +#define CMBF_BNK_WIDTH 1 /* each bank is one chip wide */ +#define CMBF_BNK_WSHIFT 0 /* log base 2 of CMBF_BNK_WIDTH */ +#define CMBF_BNK_NBLOCKS I8B5_NBLOCKS +#define CMBF_BNK_BLKSZ (I8B5_BLKSZ * CMBF_BNK_WIDTH) +#define CMBF_BNK_SIZE (I8B5_SIZE * CMBF_BNK_WIDTH) + +#define CMBF_MAX_BANKS 1 /* only 1 x 1Mbyte bank on cogent m/b */ + +/* align addresses and sizes to bank boundaries */ +#define CMBF_BNK_ADDR_ALIGN(a) ((c302f_addr_t)((c302f_size_t)(a) \ + & ~(CMBF_BNK_WIDTH - 1))) +#define CMBF_BNK_SIZE_ALIGN(s) ((c302f_size_t)CMBF_BNK_ADDR_ALIGN( \ + (c302f_size_t)(s) + (CMBF_BNK_WIDTH - 1))) + +/* align addresses and sizes to block boundaries */ +#define CMBF_BLK_ADDR_ALIGN(a) ((c302f_addr_t)((c302f_size_t)(a) \ + & ~(CMBF_BNK_BLKSZ - 1))) +#define CMBF_BLK_SIZE_ALIGN(s) ((c302f_size_t)CMBF_BLK_ADDR_ALIGN( \ + (c302f_size_t)(s) + (CMBF_BNK_BLKSZ - 1))) + +/* add a byte offset to a flash address */ +#define CMBF_ADDR_ADD_BYTEOFF(a,o) \ + (c302f_addr_t)((c302f_size_t)(a) + (o)) + +/* get base address of bank b, given flash base address a */ +#define CMBF_BNK_ADDR_BASE(a,b) \ + CMBF_ADDR_ADD_BYTEOFF((a), \ + (c302f_size_t)(b) * CMBF_BNK_SIZE) + +/* adjust an address a (within a bank) to next word, block or bank */ +#define CMBF_BNK_ADDR_NEXT_WORD(a) \ + CMBF_ADDR_ADD_BYTEOFF((a), CMBF_BNK_WIDTH) +#define CMBF_BNK_ADDR_NEXT_BLK(a) \ + CMBF_ADDR_ADD_BYTEOFF((a), CMBF_BNK_BLKSZ) +#define CMBF_BNK_ADDR_NEXT_BNK(a) \ + CMBF_ADDR_ADD_BYTEOFF((a), CMBF_BNK_SIZE) + +/* get bank address of chip register r given a bank base address a */ +#define CMBF_BNK_ADDR_I8B5REG(a,r) \ + CMBF_ADDR_ADD_BYTEOFF((a), \ + (r) << CMBF_BNK_WSHIFT) + +/* make a bank representation for each chip address */ + +#define CMBF_BNK_ADDR_MAN(a) CMBF_BNK_ADDR_I8B5REG((a), I8B5_ADDR_MAN) +#define CMBF_BNK_ADDR_DEV(a) CMBF_BNK_ADDR_I8B5REG((a), I8B5_ADDR_DEV) +#define CMBF_BNK_ADDR_CFGM(a) CMBF_BNK_ADDR_I8B5REG((a), I8B5_ADDR_CFGM) +#define CMBF_BNK_ADDR_CFG(b,a) CMBF_BNK_ADDR_I8B5REG((a), I8B5_ADDR_CFG(b)) + +/* + * replicate a chip cmd/stat/rd value into each byte position within a word + * so that multiple chips are accessed in a single word i/o operation + * + * this must be as wide as the c302f_word_t type + */ +#define CMBF_FILL_WORD(o) (((unsigned long)(o) << 24) | \ + ((unsigned long)(o) << 16) | \ + ((unsigned long)(o) << 8) | \ + (unsigned long)(o)) + +/* make a bank representation for each chip cmd/stat/rd value */ + +/* Commands */ +#define CMBF_BNK_CMD_RST CMBF_FILL_WORD(I8B5_CMD_RST) +#define CMBF_BNK_CMD_RD_ID CMBF_FILL_WORD(I8B5_CMD_RD_ID) +#define CMBF_BNK_CMD_RD_STAT CMBF_FILL_WORD(I8B5_CMD_RD_STAT) +#define CMBF_BNK_CMD_CLR_STAT CMBF_FILL_WORD(I8B5_CMD_CLR_STAT) +#define CMBF_BNK_CMD_ERASE1 CMBF_FILL_WORD(I8B5_CMD_ERASE1) +#define CMBF_BNK_CMD_ERASE2 CMBF_FILL_WORD(I8B5_CMD_ERASE2) +#define CMBF_BNK_CMD_PROG CMBF_FILL_WORD(I8B5_CMD_PROG) +#define CMBF_BNK_CMD_LOCK CMBF_FILL_WORD(I8B5_CMD_LOCK) +#define CMBF_BNK_CMD_SET_LOCK_BLK CMBF_FILL_WORD(I8B5_CMD_SET_LOCK_BLK) +#define CMBF_BNK_CMD_SET_LOCK_MSTR CMBF_FILL_WORD(I8B5_CMD_SET_LOCK_MSTR) +#define CMBF_BNK_CMD_CLR_LOCK_BLK CMBF_FILL_WORD(I8B5_CMD_CLR_LOCK_BLK) + +/* status register bits */ +#define CMBF_BNK_STAT_DPS CMBF_FILL_WORD(I8B5_STAT_DPS) +#define CMBF_BNK_STAT_PSS CMBF_FILL_WORD(I8B5_STAT_PSS) +#define CMBF_BNK_STAT_VPPS CMBF_FILL_WORD(I8B5_STAT_VPPS) +#define CMBF_BNK_STAT_PSLBS CMBF_FILL_WORD(I8B5_STAT_PSLBS) +#define CMBF_BNK_STAT_ECLBS CMBF_FILL_WORD(I8B5_STAT_ECLBS) +#define CMBF_BNK_STAT_ESS CMBF_FILL_WORD(I8B5_STAT_ESS) +#define CMBF_BNK_STAT_RDY CMBF_FILL_WORD(I8B5_STAT_RDY) + +#define CMBF_BNK_STAT_ERR CMBF_FILL_WORD(I8B5_STAT_ERR) + +/* ID and Lock Configuration */ +#define CMBF_BNK_RD_ID_LOCK CMBF_FILL_WORD(I8B5_RD_ID_LOCK) +#define CMBF_BNK_RD_ID_MAN CMBF_FILL_WORD(I8B5_RD_ID_MAN) +#define CMBF_BNK_RD_ID_DEV CMBF_FILL_WORD(I8B5_RD_ID_DEV) -- 2.30.2