From da843eab1f16f4a68dc9d3c72f176b45115d8052 Mon Sep 17 00:00:00 2001 From: Horatiu Vultur Date: Mon, 8 Apr 2019 10:31:37 +0200 Subject: [PATCH] net: mscc: servalt: Add ethernet nodes for ServalT Add ethernet nodes for ServalT SoCs family. Currently there is only one pcb(pcb116) in this family. Signed-off-by: Horatiu Vultur --- arch/mips/dts/mscc,servalt.dtsi | 40 ++++++++++++++++++++++++++++++++ arch/mips/dts/servalt_pcb116.dts | 25 ++++++++++++++++++++ 2 files changed, 65 insertions(+) diff --git a/arch/mips/dts/mscc,servalt.dtsi b/arch/mips/dts/mscc,servalt.dtsi index 4beb7a38d0..45ae2de5e8 100644 --- a/arch/mips/dts/mscc,servalt.dtsi +++ b/arch/mips/dts/mscc,servalt.dtsi @@ -145,5 +145,45 @@ #gpio-cells = <2>; gpio-ranges = <&sgpio 0 0 128>; }; + + switch: switch@1010000 { + compatible = "mscc,vsc7437-switch"; + reg = <0x01030000 0x0100>, // VTSS_TO_DEV_0 + <0x01040000 0x0100>, // VTSS_TO_DEV_1 + <0x01f00000 0x100000>, // ANA_AC + <0x01d00000 0x100000>, // ANA_CL + <0x01e00000 0x100000>, // ANA_L2 + <0x01120000 0x10000>, // ASM + <0x01130000 0x00000>, // LRN + <0x017d0000 0x10000>, // QFWD + <0x01020000 0x20000>, // QS + <0x017e0000 0x10000>, // QSYS + <0x01b00000 0x80000>; // REW + reg-names = "port0", "port1", + "ana_ac", "ana_cl", "ana_l2", "asm", "lrn", + "qfwd", "qs", "qsys", "rew"; + status = "okay"; + + ethernet-ports { + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + mdio0: mdio@010100c4 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mscc,jr2-miim"; + reg = <0x010100c4 0x24>; + status = "disabled"; + }; + + mdio1: mdio@010100e8 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "mscc,jr2-miim"; + reg = <0x010100e8 0x24>; + status = "disabled"; + }; }; }; diff --git a/arch/mips/dts/servalt_pcb116.dts b/arch/mips/dts/servalt_pcb116.dts index fb3331204b..9d4921504d 100644 --- a/arch/mips/dts/servalt_pcb116.dts +++ b/arch/mips/dts/servalt_pcb116.dts @@ -54,3 +54,28 @@ status = "okay"; sgpio-ports = <0x0000fe7f>; }; + +&mdio0 { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&switch { + ethernet-ports { + + port0: port@0 { + reg = <0>; + phy-handle = <&phy0>; + }; + port1: port@1 { + reg = <1>; + phy-handle = <&phy1>; + }; + }; +}; -- 2.30.2