From da1e2046e5f5ab268e55d30d6b74099ade0aeb6f Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 21 Jun 2013 09:07:02 +0000 Subject: [PATCH] e1000e: iAMT connections drop on driver unload when jumbo frames enabled The jumbo frame configuration in the MAC/PHY should be reverted on 82579 and newer parts when the interface is brought down (not just when the MTU is changed back to standard frame size) otherwise iAMT connections (e.g. SoL, IDE-R) will be dropped and cannot be re-acquired until the MTU is changed again. Signed-off-by: Bruce Allan Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/netdev.c | 21 ++++++++++----------- 1 file changed, 10 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index 40e6232bed27..99596a63b6d0 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -2979,17 +2979,10 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) u32 pages = 0; /* Workaround Si errata on PCHx - configure jumbo frame flow */ - if (hw->mac.type >= e1000_pch2lan) { - s32 ret_val; - - if (adapter->netdev->mtu > ETH_DATA_LEN) - ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, true); - else - ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false); - - if (ret_val) - e_dbg("failed to enable jumbo frame workaround mode\n"); - } + if ((hw->mac.type >= e1000_pch2lan) && + (adapter->netdev->mtu > ETH_DATA_LEN) && + e1000_lv_jumbo_workaround_ich8lan(hw, true)) + e_dbg("failed to enable jumbo frame workaround mode\n"); /* Program MC offset vector base */ rctl = er32(RCTL); @@ -4034,6 +4027,12 @@ void e1000e_down(struct e1000_adapter *adapter) adapter->link_speed = 0; adapter->link_duplex = 0; + /* Disable Si errata workaround on PCHx for jumbo frame flow */ + if ((hw->mac.type >= e1000_pch2lan) && + (adapter->netdev->mtu > ETH_DATA_LEN) && + e1000_lv_jumbo_workaround_ich8lan(hw, false)) + e_dbg("failed to disable jumbo frame workaround mode\n"); + if (!pci_channel_offline(adapter->pdev)) e1000e_reset(adapter); -- 2.30.2