From da1158659fa0998c456eb314ef0c429f0e6d0e36 Mon Sep 17 00:00:00 2001 From: Claudio Mignanti Date: Sat, 9 May 2009 13:15:16 +0000 Subject: [PATCH] add patches for 2.6.30, remove config-default SVN-Revision: 15743 --- target/linux/etrax/config-2.6.29 | 132 --------- .../etrax/{config-default => config-2.6.30} | 102 +++---- .../etrax/patches-2.6.29/300-sysfs.patch | 43 --- .../patches-2.6.29/600-fix_serial_cris.patch | 263 ------------------ .../100-cris-makefiles.patch | 0 .../200-samsung_flash.patch | 0 .../201-flashsize.patch | 0 .../400-Kconfig_source.patch | 0 .../500-i2c_gvc.patch | 0 9 files changed, 42 insertions(+), 498 deletions(-) delete mode 100644 target/linux/etrax/config-2.6.29 rename target/linux/etrax/{config-default => config-2.6.30} (75%) delete mode 100644 target/linux/etrax/patches-2.6.29/300-sysfs.patch delete mode 100644 target/linux/etrax/patches-2.6.29/600-fix_serial_cris.patch rename target/linux/etrax/{patches-2.6.29 => patches-2.6.30}/100-cris-makefiles.patch (100%) rename target/linux/etrax/{patches-2.6.29 => patches-2.6.30}/200-samsung_flash.patch (100%) rename target/linux/etrax/{patches-2.6.29 => patches-2.6.30}/201-flashsize.patch (100%) rename target/linux/etrax/{patches-2.6.29 => patches-2.6.30}/400-Kconfig_source.patch (100%) rename target/linux/etrax/{patches-2.6.29 => patches-2.6.30}/500-i2c_gvc.patch (100%) diff --git a/target/linux/etrax/config-2.6.29 b/target/linux/etrax/config-2.6.29 deleted file mode 100644 index a902188e08..0000000000 --- a/target/linux/etrax/config-2.6.29 +++ /dev/null @@ -1,132 +0,0 @@ -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_BASE_SMALL=0 -CONFIG_BITREVERSE=y -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_BOUNCE=y -# CONFIG_BRIDGE is not set -# CONFIG_CFG80211 is not set -CONFIG_COMPAT_NET_DEV_OPS=y -CONFIG_CRIS=y -# CONFIG_CRIS_MACH_ARTPEC3 is not set -# CONFIG_DCB is not set -CONFIG_DEFAULT_VEGAS=y -# CONFIG_DEFAULT_WESTWOOD is not set -# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set -# CONFIG_ETRAX100LX is not set -CONFIG_ETRAX100LX_V2=y -# CONFIG_ETRAXFS is not set -CONFIG_ETRAX_ARCH_V10=y -# CONFIG_ETRAX_ARCH_V32 is not set -CONFIG_ETRAX_AXISFLASHMAP=y -CONFIG_ETRAX_CMDLINE="root=/dev/mtdblock1 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200" -# CONFIG_ETRAX_CSP0_LEDS is not set -# CONFIG_ETRAX_DEBUG_PORT0 is not set -# CONFIG_ETRAX_DEBUG_PORT1 is not set -# CONFIG_ETRAX_DEBUG_PORT2 is not set -# CONFIG_ETRAX_DEBUG_PORT3 is not set -CONFIG_ETRAX_DEBUG_PORT_NULL=y -CONFIG_ETRAX_DEF_R_BUS_CONFIG=0x4 -CONFIG_ETRAX_DEF_R_PORT_PA_DATA=0xf0 -CONFIG_ETRAX_DEF_R_PORT_PA_DIR=0x1c -CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG=0x00 -CONFIG_ETRAX_DEF_R_PORT_PB_DATA=0x03 -CONFIG_ETRAX_DEF_R_PORT_PB_DIR=0xce -CONFIG_ETRAX_DEF_R_SDRAM_CONFIG=0x09603737 -CONFIG_ETRAX_DEF_R_SDRAM_TIMING=0x80008002 -CONFIG_ETRAX_DEF_R_WAITSTATES=0x95f8 -CONFIG_ETRAX_DRAM_SIZE=32 -CONFIG_ETRAX_DRAM_VIRTUAL_BASE=c0000000 -CONFIG_ETRAX_ETHERNET=y -CONFIG_ETRAX_FAST_TIMER=y -CONFIG_ETRAX_FLASH1_SIZE=0 -CONFIG_ETRAX_FLASH_BUSWIDTH=2 -CONFIG_ETRAX_GPIO=y -# CONFIG_ETRAX_I2C is not set -# CONFIG_ETRAX_I2C_GVC is not set -# CONFIG_ETRAX_KMALLOCED_MODULES is not set -CONFIG_ETRAX_LED1G=2 -CONFIG_ETRAX_LED1R=2 -CONFIG_ETRAX_LED2G=3 -CONFIG_ETRAX_LED2R=3 -CONFIG_ETRAX_LED3G=2 -CONFIG_ETRAX_LED3R=2 -CONFIG_ETRAX_NANDFLASH_BUSWIDTH=1 -CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y -# CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set -# CONFIG_ETRAX_NO_LEDS is not set -CONFIG_ETRAX_PA_BUTTON_BITMASK=02 -CONFIG_ETRAX_PA_CHANGEABLE_BITS=0xFF -CONFIG_ETRAX_PA_CHANGEABLE_DIR=0xFF -CONFIG_ETRAX_PA_LEDS=y -CONFIG_ETRAX_PB_CHANGEABLE_BITS=0xFF -CONFIG_ETRAX_PB_CHANGEABLE_DIR=0xFF -# CONFIG_ETRAX_PB_LEDS is not set -CONFIG_ETRAX_PTABLE_SECTOR=0 -CONFIG_ETRAX_RESCUE_SER0=y -# CONFIG_ETRAX_RESCUE_SER1 is not set -# CONFIG_ETRAX_RESCUE_SER2 is not set -# CONFIG_ETRAX_RESCUE_SER3 is not set -CONFIG_ETRAX_SDRAM=y -# CONFIG_ETRAX_SERIAL is not set -# CONFIG_ETRAX_SOFT_SHUTDOWN is not set -# CONFIG_ETRAX_SYNCHRONOUS_SERIAL is not set -CONFIG_ETRAX_USB_HOST=y -CONFIG_ETRAX_USB_HOST_PORT1=y -CONFIG_ETRAX_USB_HOST_PORT2=y -# CONFIG_ETRAX_VCS_SIM is not set -# CONFIG_ETRAX_WATCHDOG is not set -CONFIG_EXT2_FS=y -CONFIG_FORCE_MAX_ZONEORDER=6 -# CONFIG_FREEZER is not set -CONFIG_GENERIC_FIND_LAST_BIT=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_IOMAP=y -# CONFIG_GEN_RTC is not set -# CONFIG_HAMRADIO is not set -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -# CONFIG_HAVE_AOUT is not set -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_HAVE_IDE=y -# CONFIG_HW_RANDOM is not set -# CONFIG_I2C is not set -# CONFIG_LIB80211 is not set -# CONFIG_MAC80211 is not set -CONFIG_MISC_FILESYSTEMS=y -CONFIG_MTDRAM_ABS_POS=0x0 -CONFIG_MTDRAM_ERASE_SIZE=128 -CONFIG_MTDRAM_TOTAL_SIZE=0 -CONFIG_MTD_CFI_ADV_OPTIONS=y -# CONFIG_MTD_CFI_GEOMETRY is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CONCAT=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_MTDRAM=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NET_SCH_DRR is not set -# CONFIG_NF_DEFRAG_IPV4 is not set -CONFIG_NLS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NO_IOPORT=y -# CONFIG_OOM_REBOOT is not set -CONFIG_PAGEFLAGS_EXTENDED=y -# CONFIG_PHYS_ADDR_T_64BIT is not set -CONFIG_ROMFS_FS=y -# CONFIG_RTC is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SERIAL_8250 is not set -# CONFIG_SVINTO_SIM is not set -# CONFIG_SYSTEM_PROFILER is not set -CONFIG_UID16=y -CONFIG_USB=y -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_OXU210HP_HCD is not set -CONFIG_USB_SUPPORT=y -# CONFIG_VLAN_8021Q is not set -# CONFIG_WIRELESS_EXT_SYSFS is not set -# CONFIG_WIRELESS_OLD_REGULATORY is not set -# CONFIG_WLAN_80211 is not set diff --git a/target/linux/etrax/config-default b/target/linux/etrax/config-2.6.30 similarity index 75% rename from target/linux/etrax/config-default rename to target/linux/etrax/config-2.6.30 index fc68fec7df..6bff760ce8 100644 --- a/target/linux/etrax/config-default +++ b/target/linux/etrax/config-2.6.30 @@ -1,19 +1,17 @@ # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_BASE_SMALL=0 +# CONFIG_BINARY_PRINTF is not set CONFIG_BITREVERSE=y +# CONFIG_BLK_DEV_INITRD is not set CONFIG_BOUNCE=y -CONFIG_CLASSIC_RCU=y +# CONFIG_BRIDGE is not set +# CONFIG_CFG80211 is not set CONFIG_CRIS=y # CONFIG_CRIS_MACH_ARTPEC3 is not set -CONFIG_CRYPTO_AEAD=m -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ARC4=y -CONFIG_CRYPTO_AUTHENC=m -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO is not set +CONFIG_DEFAULT_VEGAS=y +# CONFIG_DEFAULT_WESTWOOD is not set # CONFIG_ETRAX100LX is not set CONFIG_ETRAX100LX_V2=y # CONFIG_ETRAXFS is not set @@ -22,11 +20,11 @@ CONFIG_ETRAX_ARCH_V10=y CONFIG_ETRAX_AXISFLASHMAP=y CONFIG_ETRAX_CMDLINE="root=/dev/mtdblock1 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200" # CONFIG_ETRAX_CSP0_LEDS is not set -# CONFIG_ETRAX_DEBUG_PORT0 is not set +CONFIG_ETRAX_DEBUG_PORT0=y # CONFIG_ETRAX_DEBUG_PORT1 is not set # CONFIG_ETRAX_DEBUG_PORT2 is not set # CONFIG_ETRAX_DEBUG_PORT3 is not set -CONFIG_ETRAX_DEBUG_PORT_NULL=y +# CONFIG_ETRAX_DEBUG_PORT_NULL is not set CONFIG_ETRAX_DEF_R_BUS_CONFIG=0x4 CONFIG_ETRAX_DEF_R_PORT_PA_DATA=0xf0 CONFIG_ETRAX_DEF_R_PORT_PA_DIR=0x1c @@ -38,22 +36,13 @@ CONFIG_ETRAX_DEF_R_SDRAM_TIMING=0x80008002 CONFIG_ETRAX_DEF_R_WAITSTATES=0x95f8 CONFIG_ETRAX_DRAM_SIZE=32 CONFIG_ETRAX_DRAM_VIRTUAL_BASE=c0000000 -CONFIG_ETRAX_DS1302=y -CONFIG_ETRAX_DS1302_RSTBIT=2 -CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT=y -CONFIG_ETRAX_DS1302_SCLBIT=1 -CONFIG_ETRAX_DS1302_SDABIT=0 -CONFIG_ETRAX_DS1302_TRICKLE_CHARGE=0 CONFIG_ETRAX_ETHERNET=y CONFIG_ETRAX_FAST_TIMER=y CONFIG_ETRAX_FLASH1_SIZE=0 CONFIG_ETRAX_FLASH_BUSWIDTH=2 CONFIG_ETRAX_GPIO=y -CONFIG_ETRAX_I2C=y -CONFIG_ETRAX_I2C_CLK_PORT=1 -CONFIG_ETRAX_I2C_DATA_PORT=0 -# CONFIG_ETRAX_I2C_EEPROM is not set -CONFIG_ETRAX_I2C_USES_PB_NOT_PB_I2C=y +# CONFIG_ETRAX_I2C is not set +# CONFIG_ETRAX_I2C_GVC is not set # CONFIG_ETRAX_KMALLOCED_MODULES is not set CONFIG_ETRAX_LED1G=2 CONFIG_ETRAX_LED1R=2 @@ -72,14 +61,12 @@ CONFIG_ETRAX_PA_LEDS=y CONFIG_ETRAX_PB_CHANGEABLE_BITS=0xFF CONFIG_ETRAX_PB_CHANGEABLE_DIR=0xFF # CONFIG_ETRAX_PB_LEDS is not set -# CONFIG_ETRAX_PCF8563 is not set CONFIG_ETRAX_PTABLE_SECTOR=0 CONFIG_ETRAX_RESCUE_SER0=y # CONFIG_ETRAX_RESCUE_SER1 is not set # CONFIG_ETRAX_RESCUE_SER2 is not set # CONFIG_ETRAX_RESCUE_SER3 is not set # CONFIG_ETRAX_RS485 is not set -CONFIG_ETRAX_RTC=y CONFIG_ETRAX_SDRAM=y CONFIG_ETRAX_SER0_CD_ON_PA_BIT=-1 CONFIG_ETRAX_SER0_CD_ON_PB_BIT=-1 @@ -93,17 +80,17 @@ CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE=y # CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PB is not set CONFIG_ETRAX_SER0_RI_ON_PA_BIT=-1 CONFIG_ETRAX_SER0_RI_ON_PB_BIT=-1 -CONFIG_ETRAX_SER2_CD_ON_PA_BIT=7 +CONFIG_ETRAX_SER2_CD_ON_PA_BIT=-1 CONFIG_ETRAX_SER2_CD_ON_PB_BIT=-1 -CONFIG_ETRAX_SER2_DSR_ON_PA_BIT=6 +CONFIG_ETRAX_SER2_DSR_ON_PA_BIT=-1 CONFIG_ETRAX_SER2_DSR_ON_PB_BIT=-1 -CONFIG_ETRAX_SER2_DTR_ON_PA_BIT=4 +CONFIG_ETRAX_SER2_DTR_ON_PA_BIT=-1 CONFIG_ETRAX_SER2_DTR_ON_PB_BIT=-1 # CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_MIXED is not set -# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE is not set -CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PA=y +CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE=y +# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PA is not set # CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PB is not set -CONFIG_ETRAX_SER2_RI_ON_PA_BIT=5 +CONFIG_ETRAX_SER2_RI_ON_PA_BIT=-1 CONFIG_ETRAX_SER2_RI_ON_PB_BIT=-1 CONFIG_ETRAX_SER3_CD_ON_PA_BIT=-1 CONFIG_ETRAX_SER3_CD_ON_PB_BIT=-1 @@ -144,7 +131,7 @@ CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN=y # CONFIG_ETRAX_SERIAL_PORT3_DMA9_IN is not set # CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_IN is not set # CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_OUT is not set -CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS=1 +CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS=5 # CONFIG_ETRAX_SOFT_SHUTDOWN is not set # CONFIG_ETRAX_SYNCHRONOUS_SERIAL is not set CONFIG_ETRAX_USB_HOST=y @@ -152,37 +139,24 @@ CONFIG_ETRAX_USB_HOST_PORT1=y CONFIG_ETRAX_USB_HOST_PORT2=y # CONFIG_ETRAX_VCS_SIM is not set # CONFIG_ETRAX_WATCHDOG is not set -CONFIG_FAT_FS=y +# CONFIG_FILE_LOCKING is not set CONFIG_FORCE_MAX_ZONEORDER=6 -CONFIG_FS_POSIX_ACL=y +# CONFIG_FREEZER is not set +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_IOMAP=y # CONFIG_GEN_RTC is not set +# CONFIG_HAMRADIO is not set CONFIG_HAS_DMA=y CONFIG_HAS_IOMEM=y +# CONFIG_HAVE_AOUT is not set +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_HAVE_IDE=y -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_OPROFILE is not set -# CONFIG_HOSTAP is not set +CONFIG_HAVE_MLOCK=y # CONFIG_HW_RANDOM is not set # CONFIG_I2C is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IDE is not set -CONFIG_IEEE80211=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_DEBUG=y -CONFIG_IEEE80211_SOFTMAC=m -CONFIG_IEEE80211_SOFTMAC_DEBUG=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_LZO_COMPRESS=m -CONFIG_LZO_DECOMPRESS=m -CONFIG_MSDOS_FS=y +# CONFIG_LIB80211 is not set +# CONFIG_MAC80211 is not set CONFIG_MTDRAM_ABS_POS=0x0 CONFIG_MTDRAM_ERASE_SIZE=128 CONFIG_MTDRAM_TOTAL_SIZE=0 @@ -192,15 +166,22 @@ CONFIG_MTD_CFI_ADV_OPTIONS=y CONFIG_MTD_CONCAT=y CONFIG_MTD_JEDECPROBE=y CONFIG_MTD_MTDRAM=y -CONFIG_NLS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y +# CONFIG_NETDEV_1000 is not set +# CONFIG_NF_DEFRAG_IPV4 is not set +CONFIG_NLATTR=y CONFIG_NO_IOPORT=y # CONFIG_OOM_REBOOT is not set +CONFIG_PAGEFLAGS_EXTENDED=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ROMFS_BACKED_BY_BLOCK=y +# CONFIG_ROMFS_BACKED_BY_BOTH is not set +# CONFIG_ROMFS_BACKED_BY_MTD is not set +CONFIG_ROMFS_FS=y +CONFIG_ROMFS_ON_BLOCK=y # CONFIG_RTC is not set -# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SERIAL_8250 is not set -CONFIG_SLABINFO=y +# CONFIG_SLOW_WORK is not set # CONFIG_SVINTO_SIM is not set # CONFIG_SYSTEM_PROFILER is not set CONFIG_UID16=y @@ -208,7 +189,8 @@ CONFIG_USB=y # CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_R8A66597_HCD is not set CONFIG_USB_SUPPORT=y -CONFIG_VFAT_FS=y # CONFIG_VLAN_8021Q is not set +# CONFIG_WIRELESS_EXT_SYSFS is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +# CONFIG_WLAN_80211 is not set diff --git a/target/linux/etrax/patches-2.6.29/300-sysfs.patch b/target/linux/etrax/patches-2.6.29/300-sysfs.patch deleted file mode 100644 index ffaec36758..0000000000 --- a/target/linux/etrax/patches-2.6.29/300-sysfs.patch +++ /dev/null @@ -1,43 +0,0 @@ ---- a/drivers/serial/crisv10.c -+++ b/drivers/serial/crisv10.c -@@ -27,6 +27,7 @@ static char *serial_version = "$Revision - #include - #include - #include -+#include - - #include - #include -@@ -4393,6 +4394,7 @@ static const struct tty_operations rs_op - .tiocmset = rs_tiocmset - }; - -+static struct class *rs_class; - static int __init - rs_init(void) - { -@@ -4527,6 +4529,24 @@ rs_init(void) - #endif - #endif /* CONFIG_SVINTO_SIM */ - -+ rs_class = class_create(THIS_MODULE, "rs_tty"); -+#ifdef CONFIG_ETRAX_SERIAL_PORT0 -+ device_create(rs_class, NULL, -+ MKDEV(TTY_MAJOR, 64), NULL, "ttyS0"); -+#endif -+#ifdef CONFIG_ETRAX_SERIAL_PORT1 -+ device_create(rs_class, NULL, -+ MKDEV(TTY_MAJOR, 65), NULL, "ttyS1"); -+#endif -+#ifdef CONFIG_ETRAX_SERIAL_PORT2 -+ device_create(rs_class, NULL, -+ MKDEV(TTY_MAJOR, 66), NULL, "ttyS2"); -+#endif -+#ifdef CONFIG_ETRAX_SERIAL_PORT3 -+ device_create(rs_class, NULL, -+ MKDEV(TTY_MAJOR, 67), NULL, "ttyS3"); -+#endif -+ - return 0; - } - diff --git a/target/linux/etrax/patches-2.6.29/600-fix_serial_cris.patch b/target/linux/etrax/patches-2.6.29/600-fix_serial_cris.patch deleted file mode 100644 index 4032550661..0000000000 --- a/target/linux/etrax/patches-2.6.29/600-fix_serial_cris.patch +++ /dev/null @@ -1,263 +0,0 @@ ---- a/drivers/serial/crisv10.c -+++ b/drivers/serial/crisv10.c -@@ -28,12 +28,15 @@ static char *serial_version = "$Revision - #include - #include - #include -+#include -+#include -+#include -+#include -+#include - --#include - #include - #include - #include --#include - - #include - -@@ -457,7 +460,6 @@ static struct e100_serial rs_table[] = { - - #define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial)) - --static struct ktermios *serial_termios[NR_PORTS]; - #ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER - static struct fast_timer fast_timers[NR_PORTS]; - #endif -@@ -4221,151 +4223,132 @@ rs_open(struct tty_struct *tty, struct f - return 0; - } - -+#ifdef CONFIG_PROC_FS - /* - * /proc fs routines.... - */ - --static int line_info(char *buf, struct e100_serial *info) -+static void seq_line_info(struct seq_file *m, struct e100_serial *info) - { -- char stat_buf[30]; -- int ret; - unsigned long tmp; - -- ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d", -- info->line, (unsigned long)info->ioport, info->irq); -+ seq_printf(m, "%d: uart:E100 port:%lX irq:%d", -+ info->line, (unsigned long)info->ioport, info->irq); - - if (!info->ioport || (info->type == PORT_UNKNOWN)) { -- ret += sprintf(buf+ret, "\n"); -- return ret; -+ seq_printf(m, "\n"); -+ return; - } - -- stat_buf[0] = 0; -- stat_buf[1] = 0; -- if (!E100_RTS_GET(info)) -- strcat(stat_buf, "|RTS"); -- if (!E100_CTS_GET(info)) -- strcat(stat_buf, "|CTS"); -- if (!E100_DTR_GET(info)) -- strcat(stat_buf, "|DTR"); -- if (!E100_DSR_GET(info)) -- strcat(stat_buf, "|DSR"); -- if (!E100_CD_GET(info)) -- strcat(stat_buf, "|CD"); -- if (!E100_RI_GET(info)) -- strcat(stat_buf, "|RI"); -- -- ret += sprintf(buf+ret, " baud:%d", info->baud); -- -- ret += sprintf(buf+ret, " tx:%lu rx:%lu", -+ seq_printf(m, " baud:%d", info->baud); -+ seq_printf(m, " tx:%lu rx:%lu", - (unsigned long)info->icount.tx, - (unsigned long)info->icount.rx); - tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE); -- if (tmp) { -- ret += sprintf(buf+ret, " tx_pend:%lu/%lu", -- (unsigned long)tmp, -- (unsigned long)SERIAL_XMIT_SIZE); -- } -- -- ret += sprintf(buf+ret, " rx_pend:%lu/%lu", -- (unsigned long)info->recv_cnt, -- (unsigned long)info->max_recv_cnt); -+ if (tmp) -+ seq_printf(m, " tx_pend:%lu/%lu", -+ (unsigned long)tmp, -+ (unsigned long)SERIAL_XMIT_SIZE); -+ -+ seq_printf(m, " rx_pend:%lu/%lu", -+ (unsigned long)info->recv_cnt, -+ (unsigned long)info->max_recv_cnt); - - #if 1 - if (info->port.tty) { -- - if (info->port.tty->stopped) -- ret += sprintf(buf+ret, " stopped:%i", -- (int)info->port.tty->stopped); -+ seq_printf(m, " stopped:%i", -+ (int)info->port.tty->stopped); - if (info->port.tty->hw_stopped) -- ret += sprintf(buf+ret, " hw_stopped:%i", -- (int)info->port.tty->hw_stopped); -+ seq_printf(m, " hw_stopped:%i", -+ (int)info->port.tty->hw_stopped); - } - - { - unsigned char rstat = info->ioport[REG_STATUS]; -- if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) ) -- ret += sprintf(buf+ret, " xoff_detect:1"); -+ if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect)) -+ seq_printf(m, " xoff_detect:1"); - } - - #endif - -- -- -- - if (info->icount.frame) -- ret += sprintf(buf+ret, " fe:%lu", -- (unsigned long)info->icount.frame); -+ seq_printf(m, " fe:%lu", (unsigned long)info->icount.frame); - - if (info->icount.parity) -- ret += sprintf(buf+ret, " pe:%lu", -- (unsigned long)info->icount.parity); -+ seq_printf(m, " pe:%lu", (unsigned long)info->icount.parity); - - if (info->icount.brk) -- ret += sprintf(buf+ret, " brk:%lu", -- (unsigned long)info->icount.brk); -+ seq_printf(m, " brk:%lu", (unsigned long)info->icount.brk); - - if (info->icount.overrun) -- ret += sprintf(buf+ret, " oe:%lu", -- (unsigned long)info->icount.overrun); -+ seq_printf(m, " oe:%lu", (unsigned long)info->icount.overrun); - - /* - * Last thing is the RS-232 status lines - */ -- ret += sprintf(buf+ret, " %s\n", stat_buf+1); -- return ret; -+ if (!E100_RTS_GET(info)) -+ seq_puts(m, "|RTS"); -+ if (!E100_CTS_GET(info)) -+ seq_puts(m, "|CTS"); -+ if (!E100_DTR_GET(info)) -+ seq_puts(m, "|DTR"); -+ if (!E100_DSR_GET(info)) -+ seq_puts(m, "|DSR"); -+ if (!E100_CD_GET(info)) -+ seq_puts(m, "|CD"); -+ if (!E100_RI_GET(info)) -+ seq_puts(m, "|RI"); -+ seq_puts(m, "\n"); - } - --int rs_read_proc(char *page, char **start, off_t off, int count, -- int *eof, void *data) -+ -+static int crisv10_proc_show(struct seq_file *m, void *v) - { -- int i, len = 0, l; -- off_t begin = 0; -+ int i; -+ -+ seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version); - -- len += sprintf(page, "serinfo:1.0 driver:%s\n", -- serial_version); -- for (i = 0; i < NR_PORTS && len < 4000; i++) { -+ for (i = 0; i < NR_PORTS; i++) { - if (!rs_table[i].enabled) - continue; -- l = line_info(page + len, &rs_table[i]); -- len += l; -- if (len+begin > off+count) -- goto done; -- if (len+begin < off) { -- begin += len; -- len = 0; -- } -+ seq_line_info(m, &rs_table[i]); - } - #ifdef DEBUG_LOG_INCLUDED - for (i = 0; i < debug_log_pos; i++) { -- len += sprintf(page + len, "%-4i %lu.%lu ", i, debug_log[i].time, timer_data_to_ns(debug_log[i].timer_data)); -- len += sprintf(page + len, debug_log[i].string, debug_log[i].value); -- if (len+begin > off+count) -- goto done; -- if (len+begin < off) { -- begin += len; -- len = 0; -- } -+ seq_printf(m, "%-4i %lu.%lu ", -+ i, debug_log[i].time, -+ timer_data_to_ns(debug_log[i].timer_data)); -+ seq_printf(m, debug_log[i].string, debug_log[i].value); - } -- len += sprintf(page + len, "debug_log %i/%i %li bytes\n", -- i, DEBUG_LOG_SIZE, begin+len); -+ seq_printf(m, "debug_log %i/%i\n", i, DEBUG_LOG_SIZE); - debug_log_pos = 0; - #endif -+ return 0; -+} - -- *eof = 1; --done: -- if (off >= len+begin) -- return 0; -- *start = page + (off-begin); -- return ((count < begin+len-off) ? count : begin+len-off); -+static int crisv10_proc_open(struct inode *inode, struct file *file) -+{ -+ return single_open(file, crisv10_proc_show, NULL); - } - -+static const struct file_operations crisv10_proc_fops = { -+ .owner = THIS_MODULE, -+ .open = crisv10_proc_open, -+ .read = seq_read, -+ .llseek = seq_lseek, -+ .release = single_release, -+}; -+#endif -+ -+ - /* Finally, routines used to initialize the serial driver. */ - --static void --show_serial_version(void) -+static void show_serial_version(void) - { - printk(KERN_INFO -- "ETRAX 100LX serial-driver %s, (c) 2000-2004 Axis Communications AB\r\n", -+ "ETRAX 100LX serial-driver %s, " -+ "(c) 2000-2004 Axis Communications AB\r\n", - &serial_version[11]); /* "$Revision: x.yy" */ - } - -@@ -4389,9 +4372,11 @@ static const struct tty_operations rs_op - .break_ctl = rs_break, - .send_xchar = rs_send_xchar, - .wait_until_sent = rs_wait_until_sent, -- .read_proc = rs_read_proc, - .tiocmget = rs_tiocmget, -- .tiocmset = rs_tiocmset -+ .tiocmset = rs_tiocmset, -+#ifdef CONFIG_PROC_FS -+ .proc_fops = &crisv10_proc_fops, -+#endif - }; - - static struct class *rs_class; diff --git a/target/linux/etrax/patches-2.6.29/100-cris-makefiles.patch b/target/linux/etrax/patches-2.6.30/100-cris-makefiles.patch similarity index 100% rename from target/linux/etrax/patches-2.6.29/100-cris-makefiles.patch rename to target/linux/etrax/patches-2.6.30/100-cris-makefiles.patch diff --git a/target/linux/etrax/patches-2.6.29/200-samsung_flash.patch b/target/linux/etrax/patches-2.6.30/200-samsung_flash.patch similarity index 100% rename from target/linux/etrax/patches-2.6.29/200-samsung_flash.patch rename to target/linux/etrax/patches-2.6.30/200-samsung_flash.patch diff --git a/target/linux/etrax/patches-2.6.29/201-flashsize.patch b/target/linux/etrax/patches-2.6.30/201-flashsize.patch similarity index 100% rename from target/linux/etrax/patches-2.6.29/201-flashsize.patch rename to target/linux/etrax/patches-2.6.30/201-flashsize.patch diff --git a/target/linux/etrax/patches-2.6.29/400-Kconfig_source.patch b/target/linux/etrax/patches-2.6.30/400-Kconfig_source.patch similarity index 100% rename from target/linux/etrax/patches-2.6.29/400-Kconfig_source.patch rename to target/linux/etrax/patches-2.6.30/400-Kconfig_source.patch diff --git a/target/linux/etrax/patches-2.6.29/500-i2c_gvc.patch b/target/linux/etrax/patches-2.6.30/500-i2c_gvc.patch similarity index 100% rename from target/linux/etrax/patches-2.6.29/500-i2c_gvc.patch rename to target/linux/etrax/patches-2.6.30/500-i2c_gvc.patch -- 2.30.2