From d96a782d09dbdc4a28ece3d18dc17a572e39d4f2 Mon Sep 17 00:00:00 2001 From: Neil Armstrong Date: Fri, 27 Jul 2018 14:10:00 +0200 Subject: [PATCH] ARM: meson: Add boot device discovery The Amlogic Meson SoCs ROM supports a boot over USB with a custom protocol. When no other boot medium are available (or by forcing the USB mode), the ROM sets the primary USB port as device mode and waits for a Host to enumerate. When enumerated, a custom protocol described at [1] permits writing to memory and execute some specific FIP init code to run the loaded Arm Trusted Firmware BL2 and BL3 stages before running the BL33 stage. In this mode, we can load different binaries that can be used by U-boot like a script image file. This adds support for a custom USB boot stage only available when the boot mode is USB and the script file at a pre-defined address is valid. This support was heavily copied from the Sunxi Allwinner FEL U-Boot support. The tool pyamlboot described at [2], permits using this boot mode on boards exposing the first USB port, either as OTG or Host port. [1] https://github.com/superna9999/pyamlboot/blob/master/PROTOCOL.md [2] https://github.com/superna9999/pyamlboot/blob/master/README.md Signed-off-by: Jerome Brunet Signed-off-by: Neil Armstrong --- arch/arm/include/asm/arch-meson/axg.h | 1 + arch/arm/include/asm/arch-meson/boot.h | 20 ++++++++++++ arch/arm/include/asm/arch-meson/gx.h | 1 + arch/arm/mach-meson/Kconfig | 1 + arch/arm/mach-meson/board-axg.c | 6 ++++ arch/arm/mach-meson/board-common.c | 45 ++++++++++++++++++++++++++ arch/arm/mach-meson/board-gx.c | 6 ++++ include/configs/meson64.h | 13 ++++++++ 8 files changed, 93 insertions(+) create mode 100644 arch/arm/include/asm/arch-meson/boot.h diff --git a/arch/arm/include/asm/arch-meson/axg.h b/arch/arm/include/asm/arch-meson/axg.h index 28a38b791d..d293f2a839 100644 --- a/arch/arm/include/asm/arch-meson/axg.h +++ b/arch/arm/include/asm/arch-meson/axg.h @@ -20,6 +20,7 @@ #define AXG_AO_SEC_GP_CFG4 AXG_AO_ADDR(0x94) #define AXG_AO_SEC_GP_CFG5 AXG_AO_ADDR(0x95) +#define AXG_AO_BOOT_DEVICE 0xF #define AXG_AO_MEM_SIZE_MASK 0xFFFF0000 #define AXG_AO_MEM_SIZE_SHIFT 16 #define AXG_AO_BL31_RSVMEM_SIZE_MASK 0xFFFF0000 diff --git a/arch/arm/include/asm/arch-meson/boot.h b/arch/arm/include/asm/arch-meson/boot.h new file mode 100644 index 0000000000..a90fe55081 --- /dev/null +++ b/arch/arm/include/asm/arch-meson/boot.h @@ -0,0 +1,20 @@ +/* SPDX-License-Identifier: GPL-2.0+ */ +/* + * Copyright (C) 2016 BayLibre, SAS + * Author: Neil Armstrong + */ + +#ifndef __MESON_BOOT_H__ +#define __MESON_BOOT_H__ + +/* Boot device */ +#define BOOT_DEVICE_RESERVED 0 +#define BOOT_DEVICE_EMMC 1 +#define BOOT_DEVICE_NAND 2 +#define BOOT_DEVICE_SPI 3 +#define BOOT_DEVICE_SD 4 +#define BOOT_DEVICE_USB 5 + +int meson_get_boot_device(void); + +#endif /* __MESON_BOOT_H__ */ diff --git a/arch/arm/include/asm/arch-meson/gx.h b/arch/arm/include/asm/arch-meson/gx.h index 4bc9475d35..b781ba9475 100644 --- a/arch/arm/include/asm/arch-meson/gx.h +++ b/arch/arm/include/asm/arch-meson/gx.h @@ -21,6 +21,7 @@ #define GX_AO_SEC_GP_CFG4 GX_AO_ADDR(0x94) #define GX_AO_SEC_GP_CFG5 GX_AO_ADDR(0x95) +#define GX_AO_BOOT_DEVICE 0xF #define GX_AO_MEM_SIZE_MASK 0xFFFF0000 #define GX_AO_MEM_SIZE_SHIFT 16 #define GX_AO_BL31_RSVMEM_SIZE_MASK 0xFFFF0000 diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index deddcc5ab0..11077bc6cc 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -8,6 +8,7 @@ config MESON64_COMMON select DM_SERIAL select SYSCON select REGMAP + select BOARD_LATE_INIT imply CMD_DM config MESON_GX diff --git a/arch/arm/mach-meson/board-axg.c b/arch/arm/mach-meson/board-axg.c index 014b25d61a..173905e762 100644 --- a/arch/arm/mach-meson/board-axg.c +++ b/arch/arm/mach-meson/board-axg.c @@ -5,6 +5,7 @@ */ #include +#include #include #include #include @@ -15,6 +16,11 @@ DECLARE_GLOBAL_DATA_PTR; +int meson_get_boot_device(void) +{ + return readl(AXG_AO_SEC_GP_CFG0) & AXG_AO_BOOT_DEVICE; +} + /* Configure the reserved memory zones exported by the secure registers * into EFI and DTB reserved memory entries. */ diff --git a/arch/arm/mach-meson/board-common.c b/arch/arm/mach-meson/board-common.c index 8c4f3074fb..8c41301674 100644 --- a/arch/arm/mach-meson/board-common.c +++ b/arch/arm/mach-meson/board-common.c @@ -4,6 +4,7 @@ */ #include +#include #include #include #include @@ -66,6 +67,50 @@ void meson_board_add_reserved_memory(void *fdt, u64 start, u64 size) } } +static void meson_set_boot_source(void) +{ + const char *source; + + switch (meson_get_boot_device()) { + case BOOT_DEVICE_EMMC: + source = "emmc"; + break; + + case BOOT_DEVICE_NAND: + source = "nand"; + break; + + case BOOT_DEVICE_SPI: + source = "spi"; + break; + + case BOOT_DEVICE_SD: + source = "sd"; + break; + + case BOOT_DEVICE_USB: + source = "usb"; + break; + + default: + source = "unknown"; + } + + env_set("boot_source", source); +} + +__weak int meson_board_late_init(void) +{ + return 0; +} + +int board_late_init(void) +{ + meson_set_boot_source(); + + return meson_board_late_init(); +} + void reset_cpu(ulong addr) { psci_system_reset(); diff --git a/arch/arm/mach-meson/board-gx.c b/arch/arm/mach-meson/board-gx.c index f1397f87c5..e41552db52 100644 --- a/arch/arm/mach-meson/board-gx.c +++ b/arch/arm/mach-meson/board-gx.c @@ -5,6 +5,7 @@ */ #include +#include #include #include #include @@ -15,6 +16,11 @@ DECLARE_GLOBAL_DATA_PTR; +int meson_get_boot_device(void) +{ + return readl(GX_AO_SEC_GP_CFG0) & GX_AO_BOOT_DEVICE; +} + /* Configure the reserved memory zones exported by the secure registers * into EFI and DTB reserved memory entries. */ diff --git a/include/configs/meson64.h b/include/configs/meson64.h index f961f43871..40ac079dfc 100644 --- a/include/configs/meson64.h +++ b/include/configs/meson64.h @@ -28,6 +28,18 @@ #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_TEXT_BASE #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64 MiB */ +/* ROM USB boot support, auto-execute boot.scr at scriptaddr */ +#define BOOTENV_DEV_ROMUSB(devtypeu, devtypel, instance) \ + "bootcmd_romusb=" \ + "if test \"${boot_source}\" = \"usb\" && " \ + "test -n \"${scriptaddr}\"; then " \ + "echo '(ROM USB boot)'; " \ + "source ${scriptaddr}; " \ + "fi\0" + +#define BOOTENV_DEV_NAME_ROMUSB(devtypeu, devtypel, instance) \ + "romusb " + #ifdef CONFIG_CMD_USB #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) #else @@ -36,6 +48,7 @@ #ifndef BOOT_TARGET_DEVICES #define BOOT_TARGET_DEVICES(func) \ + func(ROMUSB, romusb, na) \ func(MMC, mmc, 0) \ func(MMC, mmc, 1) \ func(MMC, mmc, 2) \ -- 2.30.2