From d9386dc8e9691ee87d63833b97055b01af869074 Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Fri, 22 Mar 2024 11:08:54 +0100 Subject: [PATCH] qualcommax: 6.6: make patches apply Drop backported patches already included in 6.6 and refresh the rest to apply. Signed-off-by: Robert Marko --- ...64-dts-qcom-ipq8074-add-A53-PLL-node.patch | 32 - ...tsens-Add-support-for-combined-inter.patch | 134 - ...tsens-Allow-configuring-min-and-max-.patch | 101 - ...al-drivers-tsens-Add-IPQ8074-support.patch | 74 - ...4-dts-qcom-ipq8074-add-thermal-nodes.patch | 130 - ...-dts-qcom-ipq8074-add-clocks-to-APCS.patch | 29 - ...-qcom-ipq8074-convert-to-parent-data.patch | 3601 ----------------- ...-dts-qcom-ipq6018-fix-NAND-node-name.patch | 28 - ...k-qcom-ipq8074-add-missing-networkin.patch | 39 - ...pq8074-add-missing-networking-resets.patch | 41 - ...074-populate-fw_name-for-all-parents.patch | 152 - ...pq8074-pass-XO-and-sleep-clocks-to-G.patch | 36 - ...v6.2-arm64-dts-qcom-add-PMP8074-DTSI.patch | 149 - ...s-qcom-ipq8074-hk01-add-VQMMC-supply.patch | 37 - ...ts-qcom-hk01-use-GPIO-flags-for-tlmm.patch | 42 - ...m64-dts-qcom-ipq8074-Fix-up-comments.patch | 82 - ...pq8074-align-TLMM-pin-configuration-.patch | 60 - ...pq6018-align-TLMM-pin-configuration-.patch | 56 - ...pq8074-set-Gen2-PCIe-pcie-max-link-s.patch | 24 - ...om-Add-support-for-IPQ8074-Gen3-port.patch | 26 - ...q8074-populate-fw_name-for-usb3phy-s.patch | 38 - ...m-ipq8074-add-compatible-fallback-to.patch | 26 - ...m-ipq8074-add-critical-thermal-trips.patch | 199 - ...-qcom-ids-Add-IDs-for-IPQ8174-family.patch | 4 +- ...q-qcom-nvmem-add-support-for-IPQ6018.patch | 14 +- ...q-qcom-nvmem-add-support-for-IPQ8074.patch | 10 +- ...pq8074-include-the-GPLL0-as-clock-pr.patch | 2 +- ...qcom-ids-Add-IDs-for-IPQ5332-and-its.patch | 27 - ...qcom-ids-Add-IDs-for-IPQ9574-and-its.patch | 33 - ...qcom-ids-add-SoC-ID-for-IPQ5312-and-.patch | 28 - ...-arm-qcom-ids-add-SoC-ID-for-IPQ5300.patch | 25 - ...-ipq6018-move-ARMv8-timer-out-of-SoC.patch | 52 - ...dts-qcom-ipq6018-Sort-nodes-properly.patch | 605 --- ...com-ipq6018-Add-remove-some-newlines.patch | 92 - ...4-dts-qcom-ipq6018-Use-lowercase-hex.patch | 25 - ...m-ipq6018-align-RPM-G-Link-node-with.patch | 28 - ...m-ipq6018-cp01-c1-drop-SPI-cs-select.patch | 27 - ...-add-few-more-reserved-memory-region.patch | 92 - ...com-enable-the-download-mode-support.patch | 49 - ...om-ipq6018-correct-qrng-unit-address.patch | 29 - ...ipq6018-add-unit-address-to-soc-node.patch | 28 - ...m64-dts-qcom-ipq6018-add-QFPROM-node.patch | 34 - ...-qcom-ipq6018-drop-incorrect-SPI-bus.patch | 37 - ...-qcom-ipq8074-drop-incorrect-SPI-bus.patch | 29 - ...pq6018-Use-floor-ops-for-sdcc-clocks.patch | 27 - ...-gcc-ipq6018-drop-redundant-F-define.patch | 27 - ...lk-qcom-gcc-ipq6018-update-UBI32-PLL.patch | 39 - ...pq6018-remove-duplicate-initializers.patch | 38 - ...m-Add-RPM-processor-subsystem-driver.patch | 132 - ...dts-qcom-Add-rpm-proc-node-for-GLINK.patch | 93 - ...ts-qcom-ipq6018-include-the-GPLL0-as.patch | 2 +- ...-qcom-gcc-ipq6018-add-QUP6-I2C-clock.patch | 4 +- ...4-dts-qcom-ipq6018-use-CPUFreq-NVMEM.patch | 4 +- ...-ipq6018-Add-remaining-QUP-UART-node.patch | 4 +- ...com-Fix-hs_phy_irq-for-QUSB2-targets.patch | 8 +- ...rm64-dts-qcom-ipq6018-add-tsens-node.patch | 2 +- ...4-dts-qcom-ipq6018-add-thermal-zones.patch | 2 +- ...6018-add-qdss_at-clock-needed-for-wi.patch | 4 +- ...fix-serdes-init-sequence-for-IPQ6018.patch | 58 +- ...4-dts-qcom-ipq8074-Add-QUP4-SPI-node.patch | 2 +- ...2-introduce-support-for-multiple-con.patch | 4 +- ...8074-rework-nss_port5-6-clock-to-mul.patch | 8 +- ...ts-ipq8074-add-reserved-memory-nodes.patch | 4 +- ...pq8074-pass-QMP-PCI-PHY-PIPE-clocks-.patch | 2 +- ...qcom-ipq8074-use-msi-parent-for-PCIe.patch | 6 +- ...remoteproc-qcom-Add-PRNG-proxy-clock.patch | 10 +- ...moteproc-qcom-Add-secure-PIL-support.patch | 6 +- ...Add-support-for-split-q6-m3-wlan-fir.patch | 8 +- ...oc-qcom-Add-ssr-subdevice-identifier.patch | 2 +- ...Update-regmap-offsets-for-halt-regis.patch | 6 +- .../0118-clk-qcom-Add-WCSSAON-reset.patch | 2 +- ...c-wcss-disable-auto-boot-for-IPQ8074.patch | 6 +- ...com-Enable-Q6v5-WCSS-for-ipq8074-SoC.patch | 12 +- ...0121-arm64-dts-ipq8074-Add-WLAN-node.patch | 2 +- ...64-dts-qcom-ipq8074-add-QFPROM-fuses.patch | 19 +- ...4-dts-qcom-ipq8074-add-CPU-OPP-table.patch | 2 +- ...wcss-populate-driver-data-for-IPQ601.patch | 8 +- ...rm64-dts-qcom-ipq6018-add-SDHCI-node.patch | 2 +- ...dts-qcom-ipq6018-add-LDOA2-regulator.patch | 2 +- ...nand-add-support-for-TH58NYG3S0HBAI4.patch | 2 +- ...egulator-add-Qualcomm-CPR-regulators.patch | 4 +- ...-workaround-networking-clock-parenti.patch | 12 +- ...wcss-change-ssr-name-for-ipq6018-wif.patch | 4 +- ...arm64-dts-qcom-ipq6018-add-wifi-node.patch | 2 +- ...07-soc-qcom-fix-smp2p-ack-on-ipq6018.patch | 2 +- ...q6v5_wcss-add-optional-qdss_at-clock.patch | 2 +- ...pq6018-assign-QDSS_AT-clock-to-wifi-.patch | 2 +- ...pq6018-change-voltage-to-perf-levels.patch | 2 +- 88 files changed, 106 insertions(+), 6889 deletions(-) delete mode 100644 target/linux/qualcommax/patches-6.6/0001-v6.2-arm64-dts-qcom-ipq8074-add-A53-PLL-node.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0002-v6.2-thermal-drivers-tsens-Add-support-for-combined-inter.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0003-v6.2-thermal-drivers-tsens-Allow-configuring-min-and-max-.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0004-v6.2-thermal-drivers-tsens-Add-IPQ8074-support.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0005-v6.2-arm64-dts-qcom-ipq8074-add-thermal-nodes.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0006-v6.2-arm64-dts-qcom-ipq8074-add-clocks-to-APCS.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0007-v6.2-clk-qcom-ipq8074-convert-to-parent-data.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0008-v6.2-arm64-dts-qcom-ipq6018-fix-NAND-node-name.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0009-v6.2-dt-bindings-clock-qcom-ipq8074-add-missing-networkin.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0010-v6.2-clk-qcom-ipq8074-add-missing-networking-resets.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0011-v6.2-clk-qcom-ipq8074-populate-fw_name-for-all-parents.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0012-v6.2-arm64-dts-qcom-ipq8074-pass-XO-and-sleep-clocks-to-G.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0013-v6.2-arm64-dts-qcom-add-PMP8074-DTSI.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0014-v6.2-arm64-dts-qcom-ipq8074-hk01-add-VQMMC-supply.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0015-v6.2-arm64-dts-qcom-hk01-use-GPIO-flags-for-tlmm.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0016-v6.2-arm64-dts-qcom-ipq8074-Fix-up-comments.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0017-v6.2-arm64-dts-qcom-ipq8074-align-TLMM-pin-configuration-.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0018-v6.2-arm64-dts-qcom-ipq6018-align-TLMM-pin-configuration-.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0019-v6.3-arm64-dts-qcom-ipq8074-set-Gen2-PCIe-pcie-max-link-s.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0020-v6.3-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0021-v6.3-clk-qcom-ipq8074-populate-fw_name-for-usb3phy-s.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0022-v6.4-arm64-dts-qcom-ipq8074-add-compatible-fallback-to.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0023-v6.5-arm64-dts-qcom-ipq8074-add-critical-thermal-trips.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0029-v6.3-dt-bindings-arm-qcom-ids-Add-IDs-for-IPQ5332-and-its.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0030-v6.4-dt-bindings-arm-qcom-ids-Add-IDs-for-IPQ9574-and-its.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0031-v6.5-dt-bindings-arm-qcom-ids-add-SoC-ID-for-IPQ5312-and-.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0032-v6.5-dt-bindings-arm-qcom-ids-add-SoC-ID-for-IPQ5300.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0033-v6.2-arm64-dts-qcom-ipq6018-move-ARMv8-timer-out-of-SoC.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0034-v6.3-arm64-dts-qcom-ipq6018-Sort-nodes-properly.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0035-v6.3-arm64-dts-qcom-ipq6018-Add-remove-some-newlines.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0036-v6.3-arm64-dts-qcom-ipq6018-Use-lowercase-hex.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0037-v6.3-arm64-dts-qcom-ipq6018-align-RPM-G-Link-node-with.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0038-v6.4-arm64-dts-qcom-ipq6018-cp01-c1-drop-SPI-cs-select.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0039-v6.5-arm64-dts-qcom-add-few-more-reserved-memory-region.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0040-v6.5-arm64-dts-qcom-enable-the-download-mode-support.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0041-v6.5-arm64-dts-qcom-ipq6018-correct-qrng-unit-address.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0042-v6.5-arm64-dts-qcom-ipq6018-add-unit-address-to-soc-node.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0043-v6.5-arm64-dts-qcom-ipq6018-add-QFPROM-node.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0044-v6.5-arm64-dts-qcom-ipq6018-drop-incorrect-SPI-bus.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0045-v6.5-arm64-dts-qcom-ipq8074-drop-incorrect-SPI-bus.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0046-v6.6-clk-qcom-gcc-ipq6018-Use-floor-ops-for-sdcc-clocks.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0047-v6.6-clk-qcom-gcc-ipq6018-drop-redundant-F-define.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0048-v6.6-clk-qcom-gcc-ipq6018-update-UBI32-PLL.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0049-v6.6-clk-qcom-gcc-ipq6018-remove-duplicate-initializers.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0050-v6.6-soc-qcom-Add-RPM-processor-subsystem-driver.patch delete mode 100644 target/linux/qualcommax/patches-6.6/0051-v6.6-arm64-dts-qcom-Add-rpm-proc-node-for-GLINK.patch diff --git a/target/linux/qualcommax/patches-6.6/0001-v6.2-arm64-dts-qcom-ipq8074-add-A53-PLL-node.patch b/target/linux/qualcommax/patches-6.6/0001-v6.2-arm64-dts-qcom-ipq8074-add-A53-PLL-node.patch deleted file mode 100644 index 5a4b1bbc9903..000000000000 --- a/target/linux/qualcommax/patches-6.6/0001-v6.2-arm64-dts-qcom-ipq8074-add-A53-PLL-node.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 6463c10bfdbd684ec7ecfd408ea541283215a088 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Fri, 19 Aug 2022 00:06:28 +0200 -Subject: [PATCH] arm64: dts: qcom: ipq8074: add A53 PLL node - -Add the required node for A53 PLL which will be used to provide the CPU -clock via APCS for APSS scaling. - -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220818220628.339366-9-robimarko@gmail.com ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 8 ++++++++ - 1 file changed, 8 insertions(+) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -677,6 +677,14 @@ - #mbox-cells = <1>; - }; - -+ a53pll: clock@b116000 { -+ compatible = "qcom,ipq8074-a53pll"; -+ reg = <0x0b116000 0x40>; -+ #clock-cells = <0>; -+ clocks = <&xo>; -+ clock-names = "xo"; -+ }; -+ - timer@b120000 { - #address-cells = <1>; - #size-cells = <1>; diff --git a/target/linux/qualcommax/patches-6.6/0002-v6.2-thermal-drivers-tsens-Add-support-for-combined-inter.patch b/target/linux/qualcommax/patches-6.6/0002-v6.2-thermal-drivers-tsens-Add-support-for-combined-inter.patch deleted file mode 100644 index 032072599968..000000000000 --- a/target/linux/qualcommax/patches-6.6/0002-v6.2-thermal-drivers-tsens-Add-support-for-combined-inter.patch +++ /dev/null @@ -1,134 +0,0 @@ -From e593e834fe8ba9bf314d8215ac05d8787f81efda Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Fri, 19 Aug 2022 00:02:42 +0200 -Subject: [PATCH] thermal/drivers/tsens: Add support for combined interrupt - -Despite using tsens v2.3 IP, IPQ8074 and IPQ6018 only have one IRQ for -signaling both up/low and critical trips. - -Signed-off-by: Robert Marko -Reviewed-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220818220245.338396-2-robimarko@gmail.com -Signed-off-by: Daniel Lezcano ---- - drivers/thermal/qcom/tsens-8960.c | 1 + - drivers/thermal/qcom/tsens-v0_1.c | 1 + - drivers/thermal/qcom/tsens-v1.c | 1 + - drivers/thermal/qcom/tsens-v2.c | 1 + - drivers/thermal/qcom/tsens.c | 38 ++++++++++++++++++++++++++----- - drivers/thermal/qcom/tsens.h | 2 ++ - 6 files changed, 38 insertions(+), 6 deletions(-) - ---- a/drivers/thermal/qcom/tsens-8960.c -+++ b/drivers/thermal/qcom/tsens-8960.c -@@ -269,6 +269,7 @@ static const struct tsens_ops ops_8960 = - static struct tsens_features tsens_8960_feat = { - .ver_major = VER_0, - .crit_int = 0, -+ .combo_int = 0, - .adc = 1, - .srot_split = 0, - .max_sensors = 11, ---- a/drivers/thermal/qcom/tsens-v0_1.c -+++ b/drivers/thermal/qcom/tsens-v0_1.c -@@ -549,6 +549,7 @@ static int __init init_8939(struct tsens - static struct tsens_features tsens_v0_1_feat = { - .ver_major = VER_0_1, - .crit_int = 0, -+ .combo_int = 0, - .adc = 1, - .srot_split = 1, - .max_sensors = 11, ---- a/drivers/thermal/qcom/tsens-v1.c -+++ b/drivers/thermal/qcom/tsens-v1.c -@@ -273,6 +273,7 @@ static int calibrate_8976(struct tsens_p - static struct tsens_features tsens_v1_feat = { - .ver_major = VER_1_X, - .crit_int = 0, -+ .combo_int = 0, - .adc = 1, - .srot_split = 1, - .max_sensors = 11, ---- a/drivers/thermal/qcom/tsens-v2.c -+++ b/drivers/thermal/qcom/tsens-v2.c -@@ -31,6 +31,7 @@ - static struct tsens_features tsens_v2_feat = { - .ver_major = VER_2_X, - .crit_int = 1, -+ .combo_int = 0, - .adc = 0, - .srot_split = 1, - .max_sensors = 16, ---- a/drivers/thermal/qcom/tsens.c -+++ b/drivers/thermal/qcom/tsens.c -@@ -532,6 +532,27 @@ static irqreturn_t tsens_irq_thread(int - return IRQ_HANDLED; - } - -+/** -+ * tsens_combined_irq_thread() - Threaded interrupt handler for combined interrupts -+ * @irq: irq number -+ * @data: tsens controller private data -+ * -+ * Handle the combined interrupt as if it were 2 separate interrupts, so call the -+ * critical handler first and then the up/low one. -+ * -+ * Return: IRQ_HANDLED -+ */ -+static irqreturn_t tsens_combined_irq_thread(int irq, void *data) -+{ -+ irqreturn_t ret; -+ -+ ret = tsens_critical_irq_thread(irq, data); -+ if (ret != IRQ_HANDLED) -+ return ret; -+ -+ return tsens_irq_thread(irq, data); -+} -+ - static int tsens_set_trips(struct thermal_zone_device *tz, int low, int high) - { - struct tsens_sensor *s = tz->devdata; -@@ -1074,13 +1095,18 @@ static int tsens_register(struct tsens_p - tsens_mC_to_hw(priv->sensor, 0)); - } - -- ret = tsens_register_irq(priv, "uplow", tsens_irq_thread); -- if (ret < 0) -- return ret; -+ if (priv->feat->combo_int) { -+ ret = tsens_register_irq(priv, "combined", -+ tsens_combined_irq_thread); -+ } else { -+ ret = tsens_register_irq(priv, "uplow", tsens_irq_thread); -+ if (ret < 0) -+ return ret; - -- if (priv->feat->crit_int) -- ret = tsens_register_irq(priv, "critical", -- tsens_critical_irq_thread); -+ if (priv->feat->crit_int) -+ ret = tsens_register_irq(priv, "critical", -+ tsens_critical_irq_thread); -+ } - - return ret; - } ---- a/drivers/thermal/qcom/tsens.h -+++ b/drivers/thermal/qcom/tsens.h -@@ -493,6 +493,7 @@ enum regfield_ids { - * struct tsens_features - Features supported by the IP - * @ver_major: Major number of IP version - * @crit_int: does the IP support critical interrupts? -+ * @combo_int: does the IP use one IRQ for up, low and critical thresholds? - * @adc: do the sensors only output adc code (instead of temperature)? - * @srot_split: does the IP neatly splits the register space into SROT and TM, - * with SROT only being available to secure boot firmware? -@@ -502,6 +503,7 @@ enum regfield_ids { - struct tsens_features { - unsigned int ver_major; - unsigned int crit_int:1; -+ unsigned int combo_int:1; - unsigned int adc:1; - unsigned int srot_split:1; - unsigned int has_watchdog:1; diff --git a/target/linux/qualcommax/patches-6.6/0003-v6.2-thermal-drivers-tsens-Allow-configuring-min-and-max-.patch b/target/linux/qualcommax/patches-6.6/0003-v6.2-thermal-drivers-tsens-Allow-configuring-min-and-max-.patch deleted file mode 100644 index 363061813a8d..000000000000 --- a/target/linux/qualcommax/patches-6.6/0003-v6.2-thermal-drivers-tsens-Allow-configuring-min-and-max-.patch +++ /dev/null @@ -1,101 +0,0 @@ -From 7805365fee582056b32c69cf35aafbb94b14a8ca Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Fri, 19 Aug 2022 00:02:43 +0200 -Subject: [PATCH] thermal/drivers/tsens: Allow configuring min and max trips - -IPQ8074 and IPQ6018 dont support negative trip temperatures and support -up to 204 degrees C as the max trip temperature. - -So, instead of always setting the -40 as min and 120 degrees C as max -allow it to be configured as part of the features. - -Signed-off-by: Robert Marko -Reviewed-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220818220245.338396-3-robimarko@gmail.com -Signed-off-by: Daniel Lezcano ---- - drivers/thermal/qcom/tsens-8960.c | 2 ++ - drivers/thermal/qcom/tsens-v0_1.c | 2 ++ - drivers/thermal/qcom/tsens-v1.c | 2 ++ - drivers/thermal/qcom/tsens-v2.c | 2 ++ - drivers/thermal/qcom/tsens.c | 4 ++-- - drivers/thermal/qcom/tsens.h | 4 ++++ - 6 files changed, 14 insertions(+), 2 deletions(-) - ---- a/drivers/thermal/qcom/tsens-8960.c -+++ b/drivers/thermal/qcom/tsens-8960.c -@@ -273,6 +273,8 @@ static struct tsens_features tsens_8960_ - .adc = 1, - .srot_split = 0, - .max_sensors = 11, -+ .trip_min_temp = -40000, -+ .trip_max_temp = 120000, - }; - - struct tsens_plat_data data_8960 = { ---- a/drivers/thermal/qcom/tsens-v0_1.c -+++ b/drivers/thermal/qcom/tsens-v0_1.c -@@ -553,6 +553,8 @@ static struct tsens_features tsens_v0_1_ - .adc = 1, - .srot_split = 1, - .max_sensors = 11, -+ .trip_min_temp = -40000, -+ .trip_max_temp = 120000, - }; - - static const struct reg_field tsens_v0_1_regfields[MAX_REGFIELDS] = { ---- a/drivers/thermal/qcom/tsens-v1.c -+++ b/drivers/thermal/qcom/tsens-v1.c -@@ -277,6 +277,8 @@ static struct tsens_features tsens_v1_fe - .adc = 1, - .srot_split = 1, - .max_sensors = 11, -+ .trip_min_temp = -40000, -+ .trip_max_temp = 120000, - }; - - static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = { ---- a/drivers/thermal/qcom/tsens-v2.c -+++ b/drivers/thermal/qcom/tsens-v2.c -@@ -35,6 +35,8 @@ static struct tsens_features tsens_v2_fe - .adc = 0, - .srot_split = 1, - .max_sensors = 16, -+ .trip_min_temp = -40000, -+ .trip_max_temp = 120000, - }; - - static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = { ---- a/drivers/thermal/qcom/tsens.c -+++ b/drivers/thermal/qcom/tsens.c -@@ -573,8 +573,8 @@ static int tsens_set_trips(struct therma - dev_dbg(dev, "[%u] %s: proposed thresholds: (%d:%d)\n", - hw_id, __func__, low, high); - -- cl_high = clamp_val(high, -40000, 120000); -- cl_low = clamp_val(low, -40000, 120000); -+ cl_high = clamp_val(high, priv->feat->trip_min_temp, priv->feat->trip_max_temp); -+ cl_low = clamp_val(low, priv->feat->trip_min_temp, priv->feat->trip_max_temp); - - high_val = tsens_mC_to_hw(s, cl_high); - low_val = tsens_mC_to_hw(s, cl_low); ---- a/drivers/thermal/qcom/tsens.h -+++ b/drivers/thermal/qcom/tsens.h -@@ -499,6 +499,8 @@ enum regfield_ids { - * with SROT only being available to secure boot firmware? - * @has_watchdog: does this IP support watchdog functionality? - * @max_sensors: maximum sensors supported by this version of the IP -+ * @trip_min_temp: minimum trip temperature supported by this version of the IP -+ * @trip_max_temp: maximum trip temperature supported by this version of the IP - */ - struct tsens_features { - unsigned int ver_major; -@@ -508,6 +510,8 @@ struct tsens_features { - unsigned int srot_split:1; - unsigned int has_watchdog:1; - unsigned int max_sensors; -+ int trip_min_temp; -+ int trip_max_temp; - }; - - /** diff --git a/target/linux/qualcommax/patches-6.6/0004-v6.2-thermal-drivers-tsens-Add-IPQ8074-support.patch b/target/linux/qualcommax/patches-6.6/0004-v6.2-thermal-drivers-tsens-Add-IPQ8074-support.patch deleted file mode 100644 index eaea6939591d..000000000000 --- a/target/linux/qualcommax/patches-6.6/0004-v6.2-thermal-drivers-tsens-Add-IPQ8074-support.patch +++ /dev/null @@ -1,74 +0,0 @@ -From 0164d794cbc58488a7321272e95958d10cf103a4 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Fri, 19 Aug 2022 00:02:44 +0200 -Subject: [PATCH] thermal/drivers/tsens: Add IPQ8074 support - -Qualcomm IPQ8074 uses tsens v2.3 IP, however unlike other tsens v2 IP -it only has one IRQ, that is used for up/low as well as critical. -It also does not support negative trip temperatures. - -Signed-off-by: Robert Marko -Reviewed-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220818220245.338396-4-robimarko@gmail.com -Signed-off-by: Daniel Lezcano ---- - drivers/thermal/qcom/tsens-v2.c | 17 +++++++++++++++++ - drivers/thermal/qcom/tsens.c | 3 +++ - drivers/thermal/qcom/tsens.h | 2 +- - 3 files changed, 21 insertions(+), 1 deletion(-) - ---- a/drivers/thermal/qcom/tsens-v2.c -+++ b/drivers/thermal/qcom/tsens-v2.c -@@ -39,6 +39,17 @@ static struct tsens_features tsens_v2_fe - .trip_max_temp = 120000, - }; - -+static struct tsens_features ipq8074_feat = { -+ .ver_major = VER_2_X, -+ .crit_int = 1, -+ .combo_int = 1, -+ .adc = 0, -+ .srot_split = 1, -+ .max_sensors = 16, -+ .trip_min_temp = 0, -+ .trip_max_temp = 204000, -+}; -+ - static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = { - /* ----- SROT ------ */ - /* VERSION */ -@@ -104,6 +115,12 @@ struct tsens_plat_data data_tsens_v2 = { - .fields = tsens_v2_regfields, - }; - -+struct tsens_plat_data data_ipq8074 = { -+ .ops = &ops_generic_v2, -+ .feat = &ipq8074_feat, -+ .fields = tsens_v2_regfields, -+}; -+ - /* Kept around for backward compatibility with old msm8996.dtsi */ - struct tsens_plat_data data_8996 = { - .num_sensors = 13, ---- a/drivers/thermal/qcom/tsens.c -+++ b/drivers/thermal/qcom/tsens.c -@@ -981,6 +981,9 @@ static const struct of_device_id tsens_t - .compatible = "qcom,ipq8064-tsens", - .data = &data_8960, - }, { -+ .compatible = "qcom,ipq8074-tsens", -+ .data = &data_ipq8074, -+ }, { - .compatible = "qcom,mdm9607-tsens", - .data = &data_9607, - }, { ---- a/drivers/thermal/qcom/tsens.h -+++ b/drivers/thermal/qcom/tsens.h -@@ -597,6 +597,6 @@ extern struct tsens_plat_data data_8916, - extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956; - - /* TSENS v2 targets */ --extern struct tsens_plat_data data_8996, data_tsens_v2; -+extern struct tsens_plat_data data_8996, data_ipq8074, data_tsens_v2; - - #endif /* __QCOM_TSENS_H__ */ diff --git a/target/linux/qualcommax/patches-6.6/0005-v6.2-arm64-dts-qcom-ipq8074-add-thermal-nodes.patch b/target/linux/qualcommax/patches-6.6/0005-v6.2-arm64-dts-qcom-ipq8074-add-thermal-nodes.patch deleted file mode 100644 index f5abd27965be..000000000000 --- a/target/linux/qualcommax/patches-6.6/0005-v6.2-arm64-dts-qcom-ipq8074-add-thermal-nodes.patch +++ /dev/null @@ -1,130 +0,0 @@ -From c3cc0c2a17f552be2426200e47a9e2c62cf449ce Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Fri, 19 Aug 2022 00:02:45 +0200 -Subject: [PATCH] arm64: dts: qcom: ipq8074: add thermal nodes - -IPQ8074 has a tsens v2.3.0 peripheral which monitors -temperatures around the various subsystems on the -die. - -So lets add the tsens and thermal zone nodes, passive -CPU cooling will come in later patches after CPU frequency -scaling is supported. - -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220818220245.338396-5-robimarko@gmail.com ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 96 +++++++++++++++++++++++++++ - 1 file changed, 96 insertions(+) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -276,6 +276,16 @@ - status = "disabled"; - }; - -+ tsens: thermal-sensor@4a9000 { -+ compatible = "qcom,ipq8074-tsens"; -+ reg = <0x4a9000 0x1000>, /* TM */ -+ <0x4a8000 0x1000>; /* SROT */ -+ interrupts = ; -+ interrupt-names = "combined"; -+ #qcom,sensors = <16>; -+ #thermal-sensor-cells = <1>; -+ }; -+ - cryptobam: dma-controller@704000 { - compatible = "qcom,bam-v1.7.0"; - reg = <0x00704000 0x20000>; -@@ -876,4 +886,90 @@ - , - ; - }; -+ -+ thermal-zones { -+ nss-top-thermal { -+ polling-delay-passive = <250>; -+ polling-delay = <1000>; -+ -+ thermal-sensors = <&tsens 4>; -+ }; -+ -+ nss0-thermal { -+ polling-delay-passive = <250>; -+ polling-delay = <1000>; -+ -+ thermal-sensors = <&tsens 5>; -+ }; -+ -+ nss1-thermal { -+ polling-delay-passive = <250>; -+ polling-delay = <1000>; -+ -+ thermal-sensors = <&tsens 6>; -+ }; -+ -+ wcss-phya0-thermal { -+ polling-delay-passive = <250>; -+ polling-delay = <1000>; -+ -+ thermal-sensors = <&tsens 7>; -+ }; -+ -+ wcss-phya1-thermal { -+ polling-delay-passive = <250>; -+ polling-delay = <1000>; -+ -+ thermal-sensors = <&tsens 8>; -+ }; -+ -+ cpu0_thermal: cpu0-thermal { -+ polling-delay-passive = <250>; -+ polling-delay = <1000>; -+ -+ thermal-sensors = <&tsens 9>; -+ }; -+ -+ cpu1_thermal: cpu1-thermal { -+ polling-delay-passive = <250>; -+ polling-delay = <1000>; -+ -+ thermal-sensors = <&tsens 10>; -+ }; -+ -+ cpu2_thermal: cpu2-thermal { -+ polling-delay-passive = <250>; -+ polling-delay = <1000>; -+ -+ thermal-sensors = <&tsens 11>; -+ }; -+ -+ cpu3_thermal: cpu3-thermal { -+ polling-delay-passive = <250>; -+ polling-delay = <1000>; -+ -+ thermal-sensors = <&tsens 12>; -+ }; -+ -+ cluster_thermal: cluster-thermal { -+ polling-delay-passive = <250>; -+ polling-delay = <1000>; -+ -+ thermal-sensors = <&tsens 13>; -+ }; -+ -+ wcss-phyb0-thermal { -+ polling-delay-passive = <250>; -+ polling-delay = <1000>; -+ -+ thermal-sensors = <&tsens 14>; -+ }; -+ -+ wcss-phyb1-thermal { -+ polling-delay-passive = <250>; -+ polling-delay = <1000>; -+ -+ thermal-sensors = <&tsens 15>; -+ }; -+ }; - }; diff --git a/target/linux/qualcommax/patches-6.6/0006-v6.2-arm64-dts-qcom-ipq8074-add-clocks-to-APCS.patch b/target/linux/qualcommax/patches-6.6/0006-v6.2-arm64-dts-qcom-ipq8074-add-clocks-to-APCS.patch deleted file mode 100644 index 96b49e60bf8c..000000000000 --- a/target/linux/qualcommax/patches-6.6/0006-v6.2-arm64-dts-qcom-ipq8074-add-clocks-to-APCS.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 0df592a0a1a3fff9133977192677aa915afc174f Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Fri, 19 Aug 2022 00:08:49 +0200 -Subject: [PATCH] arm64: dts: qcom: ipq8074: add clocks to APCS - -APCS now has support for providing the APSS clocks as the child device -for IPQ8074. - -So, add the A53 PLL and XO clocks in order to use APCS as the CPU -clocksource for APSS scaling. - -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220818220849.339732-4-robimarko@gmail.com ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -682,6 +682,8 @@ - apcs_glb: mailbox@b111000 { - compatible = "qcom,ipq8074-apcs-apps-global"; - reg = <0x0b111000 0x1000>; -+ clocks = <&a53pll>, <&xo>; -+ clock-names = "pll", "xo"; - - #clock-cells = <1>; - #mbox-cells = <1>; diff --git a/target/linux/qualcommax/patches-6.6/0007-v6.2-clk-qcom-ipq8074-convert-to-parent-data.patch b/target/linux/qualcommax/patches-6.6/0007-v6.2-clk-qcom-ipq8074-convert-to-parent-data.patch deleted file mode 100644 index c209adbc06f3..000000000000 --- a/target/linux/qualcommax/patches-6.6/0007-v6.2-clk-qcom-ipq8074-convert-to-parent-data.patch +++ /dev/null @@ -1,3601 +0,0 @@ -From e6c5115d6845f25eda7e162dcd783a2044215867 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Sun, 30 Oct 2022 18:57:01 +0100 -Subject: [PATCH] clk: qcom: ipq8074: convert to parent data - -Convert the IPQ8074 GCC driver to use parent data instead of global -name matching. - -Utilize ARRAY_SIZE for num_parents instead of hardcoding the value. - -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20221030175703.1103224-1-robimarko@gmail.com ---- - drivers/clk/qcom/gcc-ipq8074.c | 1781 +++++++++++++++----------------- - 1 file changed, 813 insertions(+), 968 deletions(-) - ---- a/drivers/clk/qcom/gcc-ipq8074.c -+++ b/drivers/clk/qcom/gcc-ipq8074.c -@@ -49,349 +49,6 @@ enum { - P_UNIPHY2_TX, - }; - --static const char * const gcc_xo_gpll0_gpll0_out_main_div2[] = { -- "xo", -- "gpll0", -- "gpll0_out_main_div2", --}; -- --static const struct parent_map gcc_xo_gpll0_gpll0_out_main_div2_map[] = { -- { P_XO, 0 }, -- { P_GPLL0, 1 }, -- { P_GPLL0_DIV2, 4 }, --}; -- --static const struct parent_map gcc_xo_gpll0_map[] = { -- { P_XO, 0 }, -- { P_GPLL0, 1 }, --}; -- --static const char * const gcc_xo_gpll0_gpll2_gpll0_out_main_div2[] = { -- "xo", -- "gpll0", -- "gpll2", -- "gpll0_out_main_div2", --}; -- --static const struct parent_map gcc_xo_gpll0_gpll2_gpll0_out_main_div2_map[] = { -- { P_XO, 0 }, -- { P_GPLL0, 1 }, -- { P_GPLL2, 2 }, -- { P_GPLL0_DIV2, 4 }, --}; -- --static const char * const gcc_xo_gpll0_sleep_clk[] = { -- "xo", -- "gpll0", -- "sleep_clk", --}; -- --static const struct parent_map gcc_xo_gpll0_sleep_clk_map[] = { -- { P_XO, 0 }, -- { P_GPLL0, 2 }, -- { P_SLEEP_CLK, 6 }, --}; -- --static const char * const gcc_xo_gpll6_gpll0_gpll0_out_main_div2[] = { -- "xo", -- "gpll6", -- "gpll0", -- "gpll0_out_main_div2", --}; -- --static const struct parent_map gcc_xo_gpll6_gpll0_gpll0_out_main_div2_map[] = { -- { P_XO, 0 }, -- { P_GPLL6, 1 }, -- { P_GPLL0, 3 }, -- { P_GPLL0_DIV2, 4 }, --}; -- --static const char * const gcc_xo_gpll0_out_main_div2_gpll0[] = { -- "xo", -- "gpll0_out_main_div2", -- "gpll0", --}; -- --static const struct parent_map gcc_xo_gpll0_out_main_div2_gpll0_map[] = { -- { P_XO, 0 }, -- { P_GPLL0_DIV2, 2 }, -- { P_GPLL0, 1 }, --}; -- --static const char * const gcc_usb3phy_0_cc_pipe_clk_xo[] = { -- "usb3phy_0_cc_pipe_clk", -- "xo", --}; -- --static const struct parent_map gcc_usb3phy_0_cc_pipe_clk_xo_map[] = { -- { P_USB3PHY_0_PIPE, 0 }, -- { P_XO, 2 }, --}; -- --static const char * const gcc_usb3phy_1_cc_pipe_clk_xo[] = { -- "usb3phy_1_cc_pipe_clk", -- "xo", --}; -- --static const struct parent_map gcc_usb3phy_1_cc_pipe_clk_xo_map[] = { -- { P_USB3PHY_1_PIPE, 0 }, -- { P_XO, 2 }, --}; -- --static const char * const gcc_pcie20_phy0_pipe_clk_xo[] = { -- "pcie20_phy0_pipe_clk", -- "xo", --}; -- --static const struct parent_map gcc_pcie20_phy0_pipe_clk_xo_map[] = { -- { P_PCIE20_PHY0_PIPE, 0 }, -- { P_XO, 2 }, --}; -- --static const char * const gcc_pcie20_phy1_pipe_clk_xo[] = { -- "pcie20_phy1_pipe_clk", -- "xo", --}; -- --static const struct parent_map gcc_pcie20_phy1_pipe_clk_xo_map[] = { -- { P_PCIE20_PHY1_PIPE, 0 }, -- { P_XO, 2 }, --}; -- --static const char * const gcc_xo_gpll0_gpll6_gpll0_div2[] = { -- "xo", -- "gpll0", -- "gpll6", -- "gpll0_out_main_div2", --}; -- --static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_div2_map[] = { -- { P_XO, 0 }, -- { P_GPLL0, 1 }, -- { P_GPLL6, 2 }, -- { P_GPLL0_DIV2, 4 }, --}; -- --static const char * const gcc_xo_gpll0_gpll6_gpll0_out_main_div2[] = { -- "xo", -- "gpll0", -- "gpll6", -- "gpll0_out_main_div2", --}; -- --static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_out_main_div2_map[] = { -- { P_XO, 0 }, -- { P_GPLL0, 1 }, -- { P_GPLL6, 2 }, -- { P_GPLL0_DIV2, 3 }, --}; -- --static const char * const gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2[] = { -- "xo", -- "bias_pll_nss_noc_clk", -- "gpll0", -- "gpll2", --}; -- --static const struct parent_map gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2_map[] = { -- { P_XO, 0 }, -- { P_BIAS_PLL_NSS_NOC, 1 }, -- { P_GPLL0, 2 }, -- { P_GPLL2, 3 }, --}; -- --static const char * const gcc_xo_nss_crypto_pll_gpll0[] = { -- "xo", -- "nss_crypto_pll", -- "gpll0", --}; -- --static const struct parent_map gcc_xo_nss_crypto_pll_gpll0_map[] = { -- { P_XO, 0 }, -- { P_NSS_CRYPTO_PLL, 1 }, -- { P_GPLL0, 2 }, --}; -- --static const char * const gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6[] = { -- "xo", -- "ubi32_pll", -- "gpll0", -- "gpll2", -- "gpll4", -- "gpll6", --}; -- --static const struct parent_map gcc_xo_ubi32_gpll0_gpll2_gpll4_gpll6_map[] = { -- { P_XO, 0 }, -- { P_UBI32_PLL, 1 }, -- { P_GPLL0, 2 }, -- { P_GPLL2, 3 }, -- { P_GPLL4, 4 }, -- { P_GPLL6, 5 }, --}; -- --static const char * const gcc_xo_gpll0_out_main_div2[] = { -- "xo", -- "gpll0_out_main_div2", --}; -- --static const struct parent_map gcc_xo_gpll0_out_main_div2_map[] = { -- { P_XO, 0 }, -- { P_GPLL0_DIV2, 1 }, --}; -- --static const char * const gcc_xo_bias_gpll0_gpll4_nss_ubi32[] = { -- "xo", -- "bias_pll_cc_clk", -- "gpll0", -- "gpll4", -- "nss_crypto_pll", -- "ubi32_pll", --}; -- --static const struct parent_map gcc_xo_bias_gpll0_gpll4_nss_ubi32_map[] = { -- { P_XO, 0 }, -- { P_BIAS_PLL, 1 }, -- { P_GPLL0, 2 }, -- { P_GPLL4, 3 }, -- { P_NSS_CRYPTO_PLL, 4 }, -- { P_UBI32_PLL, 5 }, --}; -- --static const char * const gcc_xo_gpll0_gpll4[] = { -- "xo", -- "gpll0", -- "gpll4", --}; -- --static const struct parent_map gcc_xo_gpll0_gpll4_map[] = { -- { P_XO, 0 }, -- { P_GPLL0, 1 }, -- { P_GPLL4, 2 }, --}; -- --static const char * const gcc_xo_uniphy0_rx_tx_ubi32_bias[] = { -- "xo", -- "uniphy0_gcc_rx_clk", -- "uniphy0_gcc_tx_clk", -- "ubi32_pll", -- "bias_pll_cc_clk", --}; -- --static const struct parent_map gcc_xo_uniphy0_rx_tx_ubi32_bias_map[] = { -- { P_XO, 0 }, -- { P_UNIPHY0_RX, 1 }, -- { P_UNIPHY0_TX, 2 }, -- { P_UBI32_PLL, 5 }, -- { P_BIAS_PLL, 6 }, --}; -- --static const char * const gcc_xo_uniphy0_tx_rx_ubi32_bias[] = { -- "xo", -- "uniphy0_gcc_tx_clk", -- "uniphy0_gcc_rx_clk", -- "ubi32_pll", -- "bias_pll_cc_clk", --}; -- --static const struct parent_map gcc_xo_uniphy0_tx_rx_ubi32_bias_map[] = { -- { P_XO, 0 }, -- { P_UNIPHY0_TX, 1 }, -- { P_UNIPHY0_RX, 2 }, -- { P_UBI32_PLL, 5 }, -- { P_BIAS_PLL, 6 }, --}; -- --static const char * const gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias[] = { -- "xo", -- "uniphy0_gcc_rx_clk", -- "uniphy0_gcc_tx_clk", -- "uniphy1_gcc_rx_clk", -- "uniphy1_gcc_tx_clk", -- "ubi32_pll", -- "bias_pll_cc_clk", --}; -- --static const struct parent_map --gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias_map[] = { -- { P_XO, 0 }, -- { P_UNIPHY0_RX, 1 }, -- { P_UNIPHY0_TX, 2 }, -- { P_UNIPHY1_RX, 3 }, -- { P_UNIPHY1_TX, 4 }, -- { P_UBI32_PLL, 5 }, -- { P_BIAS_PLL, 6 }, --}; -- --static const char * const gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias[] = { -- "xo", -- "uniphy0_gcc_tx_clk", -- "uniphy0_gcc_rx_clk", -- "uniphy1_gcc_tx_clk", -- "uniphy1_gcc_rx_clk", -- "ubi32_pll", -- "bias_pll_cc_clk", --}; -- --static const struct parent_map --gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias_map[] = { -- { P_XO, 0 }, -- { P_UNIPHY0_TX, 1 }, -- { P_UNIPHY0_RX, 2 }, -- { P_UNIPHY1_TX, 3 }, -- { P_UNIPHY1_RX, 4 }, -- { P_UBI32_PLL, 5 }, -- { P_BIAS_PLL, 6 }, --}; -- --static const char * const gcc_xo_uniphy2_rx_tx_ubi32_bias[] = { -- "xo", -- "uniphy2_gcc_rx_clk", -- "uniphy2_gcc_tx_clk", -- "ubi32_pll", -- "bias_pll_cc_clk", --}; -- --static const struct parent_map gcc_xo_uniphy2_rx_tx_ubi32_bias_map[] = { -- { P_XO, 0 }, -- { P_UNIPHY2_RX, 1 }, -- { P_UNIPHY2_TX, 2 }, -- { P_UBI32_PLL, 5 }, -- { P_BIAS_PLL, 6 }, --}; -- --static const char * const gcc_xo_uniphy2_tx_rx_ubi32_bias[] = { -- "xo", -- "uniphy2_gcc_tx_clk", -- "uniphy2_gcc_rx_clk", -- "ubi32_pll", -- "bias_pll_cc_clk", --}; -- --static const struct parent_map gcc_xo_uniphy2_tx_rx_ubi32_bias_map[] = { -- { P_XO, 0 }, -- { P_UNIPHY2_TX, 1 }, -- { P_UNIPHY2_RX, 2 }, -- { P_UBI32_PLL, 5 }, -- { P_BIAS_PLL, 6 }, --}; -- --static const char * const gcc_xo_gpll0_gpll6_gpll0_sleep_clk[] = { -- "xo", -- "gpll0", -- "gpll6", -- "gpll0_out_main_div2", -- "sleep_clk", --}; -- --static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map[] = { -- { P_XO, 0 }, -- { P_GPLL0, 1 }, -- { P_GPLL6, 2 }, -- { P_GPLL0_DIV2, 4 }, -- { P_SLEEP_CLK, 6 }, --}; -- - static struct clk_alpha_pll gpll0_main = { - .offset = 0x21000, - .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT], -@@ -400,8 +57,9 @@ static struct clk_alpha_pll gpll0_main = - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gpll0_main", -- .parent_names = (const char *[]){ -- "xo" -+ .parent_data = &(const struct clk_parent_data){ -+ .fw_name = "xo", -+ .name = "xo", - }, - .num_parents = 1, - .ops = &clk_alpha_pll_ops, -@@ -414,9 +72,8 @@ static struct clk_fixed_factor gpll0_out - .div = 2, - .hw.init = &(struct clk_init_data){ - .name = "gpll0_out_main_div2", -- .parent_names = (const char *[]){ -- "gpll0_main" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &gpll0_main.clkr.hw }, - .num_parents = 1, - .ops = &clk_fixed_factor_ops, - }, -@@ -428,9 +85,8 @@ static struct clk_alpha_pll_postdiv gpll - .width = 4, - .clkr.hw.init = &(struct clk_init_data){ - .name = "gpll0", -- .parent_names = (const char *[]){ -- "gpll0_main" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &gpll0_main.clkr.hw }, - .num_parents = 1, - .ops = &clk_alpha_pll_postdiv_ro_ops, - }, -@@ -444,8 +100,9 @@ static struct clk_alpha_pll gpll2_main = - .enable_mask = BIT(2), - .hw.init = &(struct clk_init_data){ - .name = "gpll2_main", -- .parent_names = (const char *[]){ -- "xo" -+ .parent_data = &(const struct clk_parent_data){ -+ .fw_name = "xo", -+ .name = "xo", - }, - .num_parents = 1, - .ops = &clk_alpha_pll_ops, -@@ -460,9 +117,8 @@ static struct clk_alpha_pll_postdiv gpll - .width = 4, - .clkr.hw.init = &(struct clk_init_data){ - .name = "gpll2", -- .parent_names = (const char *[]){ -- "gpll2_main" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &gpll2_main.clkr.hw }, - .num_parents = 1, - .ops = &clk_alpha_pll_postdiv_ro_ops, - }, -@@ -476,8 +132,9 @@ static struct clk_alpha_pll gpll4_main = - .enable_mask = BIT(5), - .hw.init = &(struct clk_init_data){ - .name = "gpll4_main", -- .parent_names = (const char *[]){ -- "xo" -+ .parent_data = &(const struct clk_parent_data){ -+ .fw_name = "xo", -+ .name = "xo", - }, - .num_parents = 1, - .ops = &clk_alpha_pll_ops, -@@ -492,9 +149,8 @@ static struct clk_alpha_pll_postdiv gpll - .width = 4, - .clkr.hw.init = &(struct clk_init_data){ - .name = "gpll4", -- .parent_names = (const char *[]){ -- "gpll4_main" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &gpll4_main.clkr.hw }, - .num_parents = 1, - .ops = &clk_alpha_pll_postdiv_ro_ops, - }, -@@ -509,8 +165,9 @@ static struct clk_alpha_pll gpll6_main = - .enable_mask = BIT(7), - .hw.init = &(struct clk_init_data){ - .name = "gpll6_main", -- .parent_names = (const char *[]){ -- "xo" -+ .parent_data = &(const struct clk_parent_data){ -+ .fw_name = "xo", -+ .name = "xo", - }, - .num_parents = 1, - .ops = &clk_alpha_pll_ops, -@@ -525,9 +182,8 @@ static struct clk_alpha_pll_postdiv gpll - .width = 2, - .clkr.hw.init = &(struct clk_init_data){ - .name = "gpll6", -- .parent_names = (const char *[]){ -- "gpll6_main" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &gpll6_main.clkr.hw }, - .num_parents = 1, - .ops = &clk_alpha_pll_postdiv_ro_ops, - }, -@@ -538,9 +194,8 @@ static struct clk_fixed_factor gpll6_out - .div = 2, - .hw.init = &(struct clk_init_data){ - .name = "gpll6_out_main_div2", -- .parent_names = (const char *[]){ -- "gpll6_main" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &gpll6_main.clkr.hw }, - .num_parents = 1, - .ops = &clk_fixed_factor_ops, - }, -@@ -555,8 +210,9 @@ static struct clk_alpha_pll ubi32_pll_ma - .enable_mask = BIT(6), - .hw.init = &(struct clk_init_data){ - .name = "ubi32_pll_main", -- .parent_names = (const char *[]){ -- "xo" -+ .parent_data = &(const struct clk_parent_data){ -+ .fw_name = "xo", -+ .name = "xo", - }, - .num_parents = 1, - .ops = &clk_alpha_pll_huayra_ops, -@@ -570,9 +226,8 @@ static struct clk_alpha_pll_postdiv ubi3 - .width = 2, - .clkr.hw.init = &(struct clk_init_data){ - .name = "ubi32_pll", -- .parent_names = (const char *[]){ -- "ubi32_pll_main" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &ubi32_pll_main.clkr.hw }, - .num_parents = 1, - .ops = &clk_alpha_pll_postdiv_ro_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -587,8 +242,9 @@ static struct clk_alpha_pll nss_crypto_p - .enable_mask = BIT(4), - .hw.init = &(struct clk_init_data){ - .name = "nss_crypto_pll_main", -- .parent_names = (const char *[]){ -- "xo" -+ .parent_data = &(const struct clk_parent_data){ -+ .fw_name = "xo", -+ .name = "xo", - }, - .num_parents = 1, - .ops = &clk_alpha_pll_ops, -@@ -602,9 +258,8 @@ static struct clk_alpha_pll_postdiv nss_ - .width = 4, - .clkr.hw.init = &(struct clk_init_data){ - .name = "nss_crypto_pll", -- .parent_names = (const char *[]){ -- "nss_crypto_pll_main" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_crypto_pll_main.clkr.hw }, - .num_parents = 1, - .ops = &clk_alpha_pll_postdiv_ro_ops, - }, -@@ -617,6 +272,18 @@ static const struct freq_tbl ftbl_pcnoc_ - { } - }; - -+static const struct clk_parent_data gcc_xo_gpll0_gpll0_out_main_div2[] = { -+ { .fw_name = "xo", .name = "xo" }, -+ { .hw = &gpll0.clkr.hw}, -+ { .hw = &gpll0_out_main_div2.hw}, -+}; -+ -+static const struct parent_map gcc_xo_gpll0_gpll0_out_main_div2_map[] = { -+ { P_XO, 0 }, -+ { P_GPLL0, 1 }, -+ { P_GPLL0_DIV2, 4 }, -+}; -+ - static struct clk_rcg2 pcnoc_bfdcd_clk_src = { - .cmd_rcgr = 0x27000, - .freq_tbl = ftbl_pcnoc_bfdcd_clk_src, -@@ -624,8 +291,8 @@ static struct clk_rcg2 pcnoc_bfdcd_clk_s - .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "pcnoc_bfdcd_clk_src", -- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), - .ops = &clk_rcg2_ops, - .flags = CLK_IS_CRITICAL, - }, -@@ -636,9 +303,8 @@ static struct clk_fixed_factor pcnoc_clk - .div = 1, - .hw.init = &(struct clk_init_data){ - .name = "pcnoc_clk_src", -- .parent_names = (const char *[]){ -- "pcnoc_bfdcd_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcnoc_bfdcd_clk_src.clkr.hw }, - .num_parents = 1, - .ops = &clk_fixed_factor_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -652,8 +318,9 @@ static struct clk_branch gcc_sleep_clk_s - .enable_mask = BIT(1), - .hw.init = &(struct clk_init_data){ - .name = "gcc_sleep_clk_src", -- .parent_names = (const char *[]){ -- "sleep_clk" -+ .parent_data = &(const struct clk_parent_data){ -+ .fw_name = "sleep_clk", -+ .name = "sleep_clk", - }, - .num_parents = 1, - .ops = &clk_branch2_ops, -@@ -676,8 +343,8 @@ static struct clk_rcg2 blsp1_qup1_i2c_ap - .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "blsp1_qup1_i2c_apps_clk_src", -- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), - .ops = &clk_rcg2_ops, - }, - }; -@@ -702,8 +369,8 @@ static struct clk_rcg2 blsp1_qup1_spi_ap - .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "blsp1_qup1_spi_apps_clk_src", -- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), - .ops = &clk_rcg2_ops, - }, - }; -@@ -715,8 +382,8 @@ static struct clk_rcg2 blsp1_qup2_i2c_ap - .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "blsp1_qup2_i2c_apps_clk_src", -- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), - .ops = &clk_rcg2_ops, - }, - }; -@@ -729,8 +396,8 @@ static struct clk_rcg2 blsp1_qup2_spi_ap - .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "blsp1_qup2_spi_apps_clk_src", -- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), - .ops = &clk_rcg2_ops, - }, - }; -@@ -742,8 +409,8 @@ static struct clk_rcg2 blsp1_qup3_i2c_ap - .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "blsp1_qup3_i2c_apps_clk_src", -- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), - .ops = &clk_rcg2_ops, - }, - }; -@@ -756,8 +423,8 @@ static struct clk_rcg2 blsp1_qup3_spi_ap - .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "blsp1_qup3_spi_apps_clk_src", -- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), - .ops = &clk_rcg2_ops, - }, - }; -@@ -769,8 +436,8 @@ static struct clk_rcg2 blsp1_qup4_i2c_ap - .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "blsp1_qup4_i2c_apps_clk_src", -- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), - .ops = &clk_rcg2_ops, - }, - }; -@@ -783,8 +450,8 @@ static struct clk_rcg2 blsp1_qup4_spi_ap - .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "blsp1_qup4_spi_apps_clk_src", -- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), - .ops = &clk_rcg2_ops, - }, - }; -@@ -796,8 +463,8 @@ static struct clk_rcg2 blsp1_qup5_i2c_ap - .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "blsp1_qup5_i2c_apps_clk_src", -- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), - .ops = &clk_rcg2_ops, - }, - }; -@@ -810,8 +477,8 @@ static struct clk_rcg2 blsp1_qup5_spi_ap - .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "blsp1_qup5_spi_apps_clk_src", -- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), - .ops = &clk_rcg2_ops, - }, - }; -@@ -823,8 +490,8 @@ static struct clk_rcg2 blsp1_qup6_i2c_ap - .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "blsp1_qup6_i2c_apps_clk_src", -- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), - .ops = &clk_rcg2_ops, - }, - }; -@@ -837,8 +504,8 @@ static struct clk_rcg2 blsp1_qup6_spi_ap - .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "blsp1_qup6_spi_apps_clk_src", -- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), - .ops = &clk_rcg2_ops, - }, - }; -@@ -871,8 +538,8 @@ static struct clk_rcg2 blsp1_uart1_apps_ - .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "blsp1_uart1_apps_clk_src", -- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), - .ops = &clk_rcg2_ops, - }, - }; -@@ -885,8 +552,8 @@ static struct clk_rcg2 blsp1_uart2_apps_ - .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "blsp1_uart2_apps_clk_src", -- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), - .ops = &clk_rcg2_ops, - }, - }; -@@ -899,8 +566,8 @@ static struct clk_rcg2 blsp1_uart3_apps_ - .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "blsp1_uart3_apps_clk_src", -- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), - .ops = &clk_rcg2_ops, - }, - }; -@@ -913,8 +580,8 @@ static struct clk_rcg2 blsp1_uart4_apps_ - .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "blsp1_uart4_apps_clk_src", -- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), - .ops = &clk_rcg2_ops, - }, - }; -@@ -927,8 +594,8 @@ static struct clk_rcg2 blsp1_uart5_apps_ - .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "blsp1_uart5_apps_clk_src", -- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), - .ops = &clk_rcg2_ops, - }, - }; -@@ -941,8 +608,8 @@ static struct clk_rcg2 blsp1_uart6_apps_ - .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "blsp1_uart6_apps_clk_src", -- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), - .ops = &clk_rcg2_ops, - }, - }; -@@ -952,6 +619,11 @@ static const struct clk_parent_data gcc_ - { .hw = &gpll0.clkr.hw }, - }; - -+static const struct parent_map gcc_xo_gpll0_map[] = { -+ { P_XO, 0 }, -+ { P_GPLL0, 1 }, -+}; -+ - static const struct freq_tbl ftbl_pcie_axi_clk_src[] = { - F(19200000, P_XO, 1, 0, 0), - F(200000000, P_GPLL0, 4, 0, 0), -@@ -966,7 +638,7 @@ static struct clk_rcg2 pcie0_axi_clk_src - .clkr.hw.init = &(struct clk_init_data){ - .name = "pcie0_axi_clk_src", - .parent_data = gcc_xo_gpll0, -- .num_parents = 2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0), - .ops = &clk_rcg2_ops, - }, - }; -@@ -975,6 +647,18 @@ static const struct freq_tbl ftbl_pcie_a - F(19200000, P_XO, 1, 0, 0), - }; - -+static const struct clk_parent_data gcc_xo_gpll0_sleep_clk[] = { -+ { .fw_name = "xo", .name = "xo" }, -+ { .hw = &gpll0.clkr.hw }, -+ { .fw_name = "sleep_clk", .name = "sleep_clk" }, -+}; -+ -+static const struct parent_map gcc_xo_gpll0_sleep_clk_map[] = { -+ { P_XO, 0 }, -+ { P_GPLL0, 2 }, -+ { P_SLEEP_CLK, 6 }, -+}; -+ - static struct clk_rcg2 pcie0_aux_clk_src = { - .cmd_rcgr = 0x75024, - .freq_tbl = ftbl_pcie_aux_clk_src, -@@ -983,12 +667,22 @@ static struct clk_rcg2 pcie0_aux_clk_src - .parent_map = gcc_xo_gpll0_sleep_clk_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "pcie0_aux_clk_src", -- .parent_names = gcc_xo_gpll0_sleep_clk, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_sleep_clk, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_sleep_clk), - .ops = &clk_rcg2_ops, - }, - }; - -+static const struct clk_parent_data gcc_pcie20_phy0_pipe_clk_xo[] = { -+ { .name = "pcie20_phy0_pipe_clk" }, -+ { .fw_name = "xo", .name = "xo" }, -+}; -+ -+static const struct parent_map gcc_pcie20_phy0_pipe_clk_xo_map[] = { -+ { P_PCIE20_PHY0_PIPE, 0 }, -+ { P_XO, 2 }, -+}; -+ - static struct clk_regmap_mux pcie0_pipe_clk_src = { - .reg = 0x7501c, - .shift = 8, -@@ -997,8 +691,8 @@ static struct clk_regmap_mux pcie0_pipe_ - .clkr = { - .hw.init = &(struct clk_init_data){ - .name = "pcie0_pipe_clk_src", -- .parent_names = gcc_pcie20_phy0_pipe_clk_xo, -- .num_parents = 2, -+ .parent_data = gcc_pcie20_phy0_pipe_clk_xo, -+ .num_parents = ARRAY_SIZE(gcc_pcie20_phy0_pipe_clk_xo), - .ops = &clk_regmap_mux_closest_ops, - .flags = CLK_SET_RATE_PARENT, - }, -@@ -1013,7 +707,7 @@ static struct clk_rcg2 pcie1_axi_clk_src - .clkr.hw.init = &(struct clk_init_data){ - .name = "pcie1_axi_clk_src", - .parent_data = gcc_xo_gpll0, -- .num_parents = 2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1026,12 +720,22 @@ static struct clk_rcg2 pcie1_aux_clk_src - .parent_map = gcc_xo_gpll0_sleep_clk_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "pcie1_aux_clk_src", -- .parent_names = gcc_xo_gpll0_sleep_clk, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_sleep_clk, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_sleep_clk), - .ops = &clk_rcg2_ops, - }, - }; - -+static const struct clk_parent_data gcc_pcie20_phy1_pipe_clk_xo[] = { -+ { .name = "pcie20_phy1_pipe_clk" }, -+ { .fw_name = "xo", .name = "xo" }, -+}; -+ -+static const struct parent_map gcc_pcie20_phy1_pipe_clk_xo_map[] = { -+ { P_PCIE20_PHY1_PIPE, 0 }, -+ { P_XO, 2 }, -+}; -+ - static struct clk_regmap_mux pcie1_pipe_clk_src = { - .reg = 0x7601c, - .shift = 8, -@@ -1040,8 +744,8 @@ static struct clk_regmap_mux pcie1_pipe_ - .clkr = { - .hw.init = &(struct clk_init_data){ - .name = "pcie1_pipe_clk_src", -- .parent_names = gcc_pcie20_phy1_pipe_clk_xo, -- .num_parents = 2, -+ .parent_data = gcc_pcie20_phy1_pipe_clk_xo, -+ .num_parents = ARRAY_SIZE(gcc_pcie20_phy1_pipe_clk_xo), - .ops = &clk_regmap_mux_closest_ops, - .flags = CLK_SET_RATE_PARENT, - }, -@@ -1060,6 +764,20 @@ static const struct freq_tbl ftbl_sdcc_a - { } - }; - -+static const struct clk_parent_data gcc_xo_gpll0_gpll2_gpll0_out_main_div2[] = { -+ { .fw_name = "xo", .name = "xo" }, -+ { .hw = &gpll0.clkr.hw }, -+ { .hw = &gpll2.clkr.hw }, -+ { .hw = &gpll0_out_main_div2.hw }, -+}; -+ -+static const struct parent_map gcc_xo_gpll0_gpll2_gpll0_out_main_div2_map[] = { -+ { P_XO, 0 }, -+ { P_GPLL0, 1 }, -+ { P_GPLL2, 2 }, -+ { P_GPLL0_DIV2, 4 }, -+}; -+ - static struct clk_rcg2 sdcc1_apps_clk_src = { - .cmd_rcgr = 0x42004, - .freq_tbl = ftbl_sdcc_apps_clk_src, -@@ -1068,8 +786,8 @@ static struct clk_rcg2 sdcc1_apps_clk_sr - .parent_map = gcc_xo_gpll0_gpll2_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "sdcc1_apps_clk_src", -- .parent_names = gcc_xo_gpll0_gpll2_gpll0_out_main_div2, -- .num_parents = 4, -+ .parent_data = gcc_xo_gpll0_gpll2_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll2_gpll0_out_main_div2), - .ops = &clk_rcg2_floor_ops, - }, - }; -@@ -1080,6 +798,20 @@ static const struct freq_tbl ftbl_sdcc_i - F(308570000, P_GPLL6, 3.5, 0, 0), - }; - -+static const struct clk_parent_data gcc_xo_gpll0_gpll6_gpll0_div2[] = { -+ { .fw_name = "xo", .name = "xo" }, -+ { .hw = &gpll0.clkr.hw }, -+ { .hw = &gpll6.clkr.hw }, -+ { .hw = &gpll0_out_main_div2.hw }, -+}; -+ -+static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_div2_map[] = { -+ { P_XO, 0 }, -+ { P_GPLL0, 1 }, -+ { P_GPLL6, 2 }, -+ { P_GPLL0_DIV2, 4 }, -+}; -+ - static struct clk_rcg2 sdcc1_ice_core_clk_src = { - .cmd_rcgr = 0x5d000, - .freq_tbl = ftbl_sdcc_ice_core_clk_src, -@@ -1088,8 +820,8 @@ static struct clk_rcg2 sdcc1_ice_core_cl - .parent_map = gcc_xo_gpll0_gpll6_gpll0_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "sdcc1_ice_core_clk_src", -- .parent_names = gcc_xo_gpll0_gpll6_gpll0_div2, -- .num_parents = 4, -+ .parent_data = gcc_xo_gpll0_gpll6_gpll0_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll6_gpll0_div2), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1102,8 +834,8 @@ static struct clk_rcg2 sdcc2_apps_clk_sr - .parent_map = gcc_xo_gpll0_gpll2_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "sdcc2_apps_clk_src", -- .parent_names = gcc_xo_gpll0_gpll2_gpll0_out_main_div2, -- .num_parents = 4, -+ .parent_data = gcc_xo_gpll0_gpll2_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll2_gpll0_out_main_div2), - .ops = &clk_rcg2_floor_ops, - }, - }; -@@ -1115,6 +847,18 @@ static const struct freq_tbl ftbl_usb_ma - { } - }; - -+static const struct clk_parent_data gcc_xo_gpll0_out_main_div2_gpll0[] = { -+ { .fw_name = "xo", .name = "xo" }, -+ { .hw = &gpll0_out_main_div2.hw }, -+ { .hw = &gpll0.clkr.hw }, -+}; -+ -+static const struct parent_map gcc_xo_gpll0_out_main_div2_gpll0_map[] = { -+ { P_XO, 0 }, -+ { P_GPLL0_DIV2, 2 }, -+ { P_GPLL0, 1 }, -+}; -+ - static struct clk_rcg2 usb0_master_clk_src = { - .cmd_rcgr = 0x3e00c, - .freq_tbl = ftbl_usb_master_clk_src, -@@ -1123,8 +867,8 @@ static struct clk_rcg2 usb0_master_clk_s - .parent_map = gcc_xo_gpll0_out_main_div2_gpll0_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "usb0_master_clk_src", -- .parent_names = gcc_xo_gpll0_out_main_div2_gpll0, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_out_main_div2_gpll0, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_out_main_div2_gpll0), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1142,8 +886,8 @@ static struct clk_rcg2 usb0_aux_clk_src - .parent_map = gcc_xo_gpll0_sleep_clk_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "usb0_aux_clk_src", -- .parent_names = gcc_xo_gpll0_sleep_clk, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_sleep_clk, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_sleep_clk), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1155,6 +899,20 @@ static const struct freq_tbl ftbl_usb_mo - { } - }; - -+static const struct clk_parent_data gcc_xo_gpll6_gpll0_gpll0_out_main_div2[] = { -+ { .fw_name = "xo", .name = "xo" }, -+ { .hw = &gpll6.clkr.hw }, -+ { .hw = &gpll0.clkr.hw }, -+ { .hw = &gpll0_out_main_div2.hw }, -+}; -+ -+static const struct parent_map gcc_xo_gpll6_gpll0_gpll0_out_main_div2_map[] = { -+ { P_XO, 0 }, -+ { P_GPLL6, 1 }, -+ { P_GPLL0, 3 }, -+ { P_GPLL0_DIV2, 4 }, -+}; -+ - static struct clk_rcg2 usb0_mock_utmi_clk_src = { - .cmd_rcgr = 0x3e020, - .freq_tbl = ftbl_usb_mock_utmi_clk_src, -@@ -1163,12 +921,22 @@ static struct clk_rcg2 usb0_mock_utmi_cl - .parent_map = gcc_xo_gpll6_gpll0_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "usb0_mock_utmi_clk_src", -- .parent_names = gcc_xo_gpll6_gpll0_gpll0_out_main_div2, -- .num_parents = 4, -+ .parent_data = gcc_xo_gpll6_gpll0_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll6_gpll0_gpll0_out_main_div2), - .ops = &clk_rcg2_ops, - }, - }; - -+static const struct clk_parent_data gcc_usb3phy_0_cc_pipe_clk_xo[] = { -+ { .name = "usb3phy_0_cc_pipe_clk" }, -+ { .fw_name = "xo", .name = "xo" }, -+}; -+ -+static const struct parent_map gcc_usb3phy_0_cc_pipe_clk_xo_map[] = { -+ { P_USB3PHY_0_PIPE, 0 }, -+ { P_XO, 2 }, -+}; -+ - static struct clk_regmap_mux usb0_pipe_clk_src = { - .reg = 0x3e048, - .shift = 8, -@@ -1177,8 +945,8 @@ static struct clk_regmap_mux usb0_pipe_c - .clkr = { - .hw.init = &(struct clk_init_data){ - .name = "usb0_pipe_clk_src", -- .parent_names = gcc_usb3phy_0_cc_pipe_clk_xo, -- .num_parents = 2, -+ .parent_data = gcc_usb3phy_0_cc_pipe_clk_xo, -+ .num_parents = ARRAY_SIZE(gcc_usb3phy_0_cc_pipe_clk_xo), - .ops = &clk_regmap_mux_closest_ops, - .flags = CLK_SET_RATE_PARENT, - }, -@@ -1193,8 +961,8 @@ static struct clk_rcg2 usb1_master_clk_s - .parent_map = gcc_xo_gpll0_out_main_div2_gpll0_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "usb1_master_clk_src", -- .parent_names = gcc_xo_gpll0_out_main_div2_gpll0, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_out_main_div2_gpll0, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_out_main_div2_gpll0), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1207,8 +975,8 @@ static struct clk_rcg2 usb1_aux_clk_src - .parent_map = gcc_xo_gpll0_sleep_clk_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "usb1_aux_clk_src", -- .parent_names = gcc_xo_gpll0_sleep_clk, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_sleep_clk, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_sleep_clk), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1221,12 +989,22 @@ static struct clk_rcg2 usb1_mock_utmi_cl - .parent_map = gcc_xo_gpll6_gpll0_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "usb1_mock_utmi_clk_src", -- .parent_names = gcc_xo_gpll6_gpll0_gpll0_out_main_div2, -- .num_parents = 4, -+ .parent_data = gcc_xo_gpll6_gpll0_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll6_gpll0_gpll0_out_main_div2), - .ops = &clk_rcg2_ops, - }, - }; - -+static const struct clk_parent_data gcc_usb3phy_1_cc_pipe_clk_xo[] = { -+ { .name = "usb3phy_1_cc_pipe_clk" }, -+ { .fw_name = "xo", .name = "xo" }, -+}; -+ -+static const struct parent_map gcc_usb3phy_1_cc_pipe_clk_xo_map[] = { -+ { P_USB3PHY_1_PIPE, 0 }, -+ { P_XO, 2 }, -+}; -+ - static struct clk_regmap_mux usb1_pipe_clk_src = { - .reg = 0x3f048, - .shift = 8, -@@ -1235,8 +1013,8 @@ static struct clk_regmap_mux usb1_pipe_c - .clkr = { - .hw.init = &(struct clk_init_data){ - .name = "usb1_pipe_clk_src", -- .parent_names = gcc_usb3phy_1_cc_pipe_clk_xo, -- .num_parents = 2, -+ .parent_data = gcc_usb3phy_1_cc_pipe_clk_xo, -+ .num_parents = ARRAY_SIZE(gcc_usb3phy_1_cc_pipe_clk_xo), - .ops = &clk_regmap_mux_closest_ops, - .flags = CLK_SET_RATE_PARENT, - }, -@@ -1250,8 +1028,9 @@ static struct clk_branch gcc_xo_clk_src - .enable_mask = BIT(1), - .hw.init = &(struct clk_init_data){ - .name = "gcc_xo_clk_src", -- .parent_names = (const char *[]){ -- "xo" -+ .parent_data = &(const struct clk_parent_data){ -+ .fw_name = "xo", -+ .name = "xo", - }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL, -@@ -1265,9 +1044,8 @@ static struct clk_fixed_factor gcc_xo_di - .div = 4, - .hw.init = &(struct clk_init_data){ - .name = "gcc_xo_div4_clk_src", -- .parent_names = (const char *[]){ -- "gcc_xo_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &gcc_xo_clk_src.clkr.hw }, - .num_parents = 1, - .ops = &clk_fixed_factor_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1285,6 +1063,20 @@ static const struct freq_tbl ftbl_system - { } - }; - -+static const struct clk_parent_data gcc_xo_gpll0_gpll6_gpll0_out_main_div2[] = { -+ { .fw_name = "xo", .name = "xo" }, -+ { .hw = &gpll0.clkr.hw }, -+ { .hw = &gpll6.clkr.hw }, -+ { .hw = &gpll0_out_main_div2.hw }, -+}; -+ -+static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_out_main_div2_map[] = { -+ { P_XO, 0 }, -+ { P_GPLL0, 1 }, -+ { P_GPLL6, 2 }, -+ { P_GPLL0_DIV2, 3 }, -+}; -+ - static struct clk_rcg2 system_noc_bfdcd_clk_src = { - .cmd_rcgr = 0x26004, - .freq_tbl = ftbl_system_noc_bfdcd_clk_src, -@@ -1292,8 +1084,8 @@ static struct clk_rcg2 system_noc_bfdcd_ - .parent_map = gcc_xo_gpll0_gpll6_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "system_noc_bfdcd_clk_src", -- .parent_names = gcc_xo_gpll0_gpll6_gpll0_out_main_div2, -- .num_parents = 4, -+ .parent_data = gcc_xo_gpll0_gpll6_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll6_gpll0_out_main_div2), - .ops = &clk_rcg2_ops, - .flags = CLK_IS_CRITICAL, - }, -@@ -1304,9 +1096,8 @@ static struct clk_fixed_factor system_no - .div = 1, - .hw.init = &(struct clk_init_data){ - .name = "system_noc_clk_src", -- .parent_names = (const char *[]){ -- "system_noc_bfdcd_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &system_noc_bfdcd_clk_src.clkr.hw }, - .num_parents = 1, - .ops = &clk_fixed_factor_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1327,7 +1118,7 @@ static struct clk_rcg2 nss_ce_clk_src = - .clkr.hw.init = &(struct clk_init_data){ - .name = "nss_ce_clk_src", - .parent_data = gcc_xo_gpll0, -- .num_parents = 2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1338,6 +1129,20 @@ static const struct freq_tbl ftbl_nss_no - { } - }; - -+static const struct clk_parent_data gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2[] = { -+ { .fw_name = "xo", .name = "xo" }, -+ { .name = "bias_pll_nss_noc_clk" }, -+ { .hw = &gpll0.clkr.hw }, -+ { .hw = &gpll2.clkr.hw }, -+}; -+ -+static const struct parent_map gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2_map[] = { -+ { P_XO, 0 }, -+ { P_BIAS_PLL_NSS_NOC, 1 }, -+ { P_GPLL0, 2 }, -+ { P_GPLL2, 3 }, -+}; -+ - static struct clk_rcg2 nss_noc_bfdcd_clk_src = { - .cmd_rcgr = 0x68088, - .freq_tbl = ftbl_nss_noc_bfdcd_clk_src, -@@ -1345,8 +1150,8 @@ static struct clk_rcg2 nss_noc_bfdcd_clk - .parent_map = gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "nss_noc_bfdcd_clk_src", -- .parent_names = gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2, -- .num_parents = 4, -+ .parent_data = gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2, -+ .num_parents = ARRAY_SIZE(gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1356,9 +1161,8 @@ static struct clk_fixed_factor nss_noc_c - .div = 1, - .hw.init = &(struct clk_init_data){ - .name = "nss_noc_clk_src", -- .parent_names = (const char *[]){ -- "nss_noc_bfdcd_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_noc_bfdcd_clk_src.clkr.hw }, - .num_parents = 1, - .ops = &clk_fixed_factor_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1371,6 +1175,18 @@ static const struct freq_tbl ftbl_nss_cr - { } - }; - -+static const struct clk_parent_data gcc_xo_nss_crypto_pll_gpll0[] = { -+ { .fw_name = "xo", .name = "xo" }, -+ { .hw = &nss_crypto_pll.clkr.hw }, -+ { .hw = &gpll0.clkr.hw }, -+}; -+ -+static const struct parent_map gcc_xo_nss_crypto_pll_gpll0_map[] = { -+ { P_XO, 0 }, -+ { P_NSS_CRYPTO_PLL, 1 }, -+ { P_GPLL0, 2 }, -+}; -+ - static struct clk_rcg2 nss_crypto_clk_src = { - .cmd_rcgr = 0x68144, - .freq_tbl = ftbl_nss_crypto_clk_src, -@@ -1379,8 +1195,8 @@ static struct clk_rcg2 nss_crypto_clk_sr - .parent_map = gcc_xo_nss_crypto_pll_gpll0_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "nss_crypto_clk_src", -- .parent_names = gcc_xo_nss_crypto_pll_gpll0, -- .num_parents = 3, -+ .parent_data = gcc_xo_nss_crypto_pll_gpll0, -+ .num_parents = ARRAY_SIZE(gcc_xo_nss_crypto_pll_gpll0), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1394,6 +1210,24 @@ static const struct freq_tbl ftbl_nss_ub - { } - }; - -+static const struct clk_parent_data gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6[] = { -+ { .fw_name = "xo", .name = "xo" }, -+ { .hw = &ubi32_pll.clkr.hw }, -+ { .hw = &gpll0.clkr.hw }, -+ { .hw = &gpll2.clkr.hw }, -+ { .hw = &gpll4.clkr.hw }, -+ { .hw = &gpll6.clkr.hw }, -+}; -+ -+static const struct parent_map gcc_xo_ubi32_gpll0_gpll2_gpll4_gpll6_map[] = { -+ { P_XO, 0 }, -+ { P_UBI32_PLL, 1 }, -+ { P_GPLL0, 2 }, -+ { P_GPLL2, 3 }, -+ { P_GPLL4, 4 }, -+ { P_GPLL6, 5 }, -+}; -+ - static struct clk_rcg2 nss_ubi0_clk_src = { - .cmd_rcgr = 0x68104, - .freq_tbl = ftbl_nss_ubi_clk_src, -@@ -1401,8 +1235,8 @@ static struct clk_rcg2 nss_ubi0_clk_src - .parent_map = gcc_xo_ubi32_gpll0_gpll2_gpll4_gpll6_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "nss_ubi0_clk_src", -- .parent_names = gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6, -- .num_parents = 6, -+ .parent_data = gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6, -+ .num_parents = ARRAY_SIZE(gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6), - .ops = &clk_rcg2_ops, - .flags = CLK_SET_RATE_PARENT, - }, -@@ -1415,9 +1249,8 @@ static struct clk_regmap_div nss_ubi0_di - .clkr = { - .hw.init = &(struct clk_init_data){ - .name = "nss_ubi0_div_clk_src", -- .parent_names = (const char *[]){ -- "nss_ubi0_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ubi0_clk_src.clkr.hw }, - .num_parents = 1, - .ops = &clk_regmap_div_ro_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1432,8 +1265,8 @@ static struct clk_rcg2 nss_ubi1_clk_src - .parent_map = gcc_xo_ubi32_gpll0_gpll2_gpll4_gpll6_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "nss_ubi1_clk_src", -- .parent_names = gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6, -- .num_parents = 6, -+ .parent_data = gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6, -+ .num_parents = ARRAY_SIZE(gcc_xo_ubi32_pll_gpll0_gpll2_gpll4_gpll6), - .ops = &clk_rcg2_ops, - .flags = CLK_SET_RATE_PARENT, - }, -@@ -1446,9 +1279,8 @@ static struct clk_regmap_div nss_ubi1_di - .clkr = { - .hw.init = &(struct clk_init_data){ - .name = "nss_ubi1_div_clk_src", -- .parent_names = (const char *[]){ -- "nss_ubi1_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ubi1_clk_src.clkr.hw }, - .num_parents = 1, - .ops = &clk_regmap_div_ro_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1462,6 +1294,16 @@ static const struct freq_tbl ftbl_ubi_mp - { } - }; - -+static const struct clk_parent_data gcc_xo_gpll0_out_main_div2[] = { -+ { .fw_name = "xo", .name = "xo" }, -+ { .hw = &gpll0_out_main_div2.hw }, -+}; -+ -+static const struct parent_map gcc_xo_gpll0_out_main_div2_map[] = { -+ { P_XO, 0 }, -+ { P_GPLL0_DIV2, 1 }, -+}; -+ - static struct clk_rcg2 ubi_mpt_clk_src = { - .cmd_rcgr = 0x68090, - .freq_tbl = ftbl_ubi_mpt_clk_src, -@@ -1469,8 +1311,8 @@ static struct clk_rcg2 ubi_mpt_clk_src = - .parent_map = gcc_xo_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "ubi_mpt_clk_src", -- .parent_names = gcc_xo_gpll0_out_main_div2, -- .num_parents = 2, -+ .parent_data = gcc_xo_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_out_main_div2), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1481,6 +1323,18 @@ static const struct freq_tbl ftbl_nss_im - { } - }; - -+static const struct clk_parent_data gcc_xo_gpll0_gpll4[] = { -+ { .fw_name = "xo", .name = "xo" }, -+ { .hw = &gpll0.clkr.hw }, -+ { .hw = &gpll4.clkr.hw }, -+}; -+ -+static const struct parent_map gcc_xo_gpll0_gpll4_map[] = { -+ { P_XO, 0 }, -+ { P_GPLL0, 1 }, -+ { P_GPLL4, 2 }, -+}; -+ - static struct clk_rcg2 nss_imem_clk_src = { - .cmd_rcgr = 0x68158, - .freq_tbl = ftbl_nss_imem_clk_src, -@@ -1488,8 +1342,8 @@ static struct clk_rcg2 nss_imem_clk_src - .parent_map = gcc_xo_gpll0_gpll4_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "nss_imem_clk_src", -- .parent_names = gcc_xo_gpll0_gpll4, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_gpll4, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll4), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1500,6 +1354,24 @@ static const struct freq_tbl ftbl_nss_pp - { } - }; - -+static const struct clk_parent_data gcc_xo_bias_gpll0_gpll4_nss_ubi32[] = { -+ { .fw_name = "xo", .name = "xo" }, -+ { .name = "bias_pll_cc_clk" }, -+ { .hw = &gpll0.clkr.hw }, -+ { .hw = &gpll4.clkr.hw }, -+ { .hw = &nss_crypto_pll.clkr.hw }, -+ { .hw = &ubi32_pll.clkr.hw }, -+}; -+ -+static const struct parent_map gcc_xo_bias_gpll0_gpll4_nss_ubi32_map[] = { -+ { P_XO, 0 }, -+ { P_BIAS_PLL, 1 }, -+ { P_GPLL0, 2 }, -+ { P_GPLL4, 3 }, -+ { P_NSS_CRYPTO_PLL, 4 }, -+ { P_UBI32_PLL, 5 }, -+}; -+ - static struct clk_rcg2 nss_ppe_clk_src = { - .cmd_rcgr = 0x68080, - .freq_tbl = ftbl_nss_ppe_clk_src, -@@ -1507,8 +1379,8 @@ static struct clk_rcg2 nss_ppe_clk_src = - .parent_map = gcc_xo_bias_gpll0_gpll4_nss_ubi32_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "nss_ppe_clk_src", -- .parent_names = gcc_xo_bias_gpll0_gpll4_nss_ubi32, -- .num_parents = 6, -+ .parent_data = gcc_xo_bias_gpll0_gpll4_nss_ubi32, -+ .num_parents = ARRAY_SIZE(gcc_xo_bias_gpll0_gpll4_nss_ubi32), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1518,9 +1390,8 @@ static struct clk_fixed_factor nss_ppe_c - .div = 4, - .hw.init = &(struct clk_init_data){ - .name = "nss_ppe_cdiv_clk_src", -- .parent_names = (const char *[]){ -- "nss_ppe_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ppe_clk_src.clkr.hw }, - .num_parents = 1, - .ops = &clk_fixed_factor_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1534,6 +1405,22 @@ static const struct freq_tbl ftbl_nss_po - { } - }; - -+static const struct clk_parent_data gcc_xo_uniphy0_rx_tx_ubi32_bias[] = { -+ { .fw_name = "xo", .name = "xo" }, -+ { .name = "uniphy0_gcc_rx_clk" }, -+ { .name = "uniphy0_gcc_tx_clk" }, -+ { .hw = &ubi32_pll.clkr.hw }, -+ { .name = "bias_pll_cc_clk" }, -+}; -+ -+static const struct parent_map gcc_xo_uniphy0_rx_tx_ubi32_bias_map[] = { -+ { P_XO, 0 }, -+ { P_UNIPHY0_RX, 1 }, -+ { P_UNIPHY0_TX, 2 }, -+ { P_UBI32_PLL, 5 }, -+ { P_BIAS_PLL, 6 }, -+}; -+ - static struct clk_rcg2 nss_port1_rx_clk_src = { - .cmd_rcgr = 0x68020, - .freq_tbl = ftbl_nss_port1_rx_clk_src, -@@ -1541,8 +1428,8 @@ static struct clk_rcg2 nss_port1_rx_clk_ - .parent_map = gcc_xo_uniphy0_rx_tx_ubi32_bias_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "nss_port1_rx_clk_src", -- .parent_names = gcc_xo_uniphy0_rx_tx_ubi32_bias, -- .num_parents = 5, -+ .parent_data = gcc_xo_uniphy0_rx_tx_ubi32_bias, -+ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_rx_tx_ubi32_bias), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1554,9 +1441,8 @@ static struct clk_regmap_div nss_port1_r - .clkr = { - .hw.init = &(struct clk_init_data){ - .name = "nss_port1_rx_div_clk_src", -- .parent_names = (const char *[]){ -- "nss_port1_rx_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port1_rx_clk_src.clkr.hw }, - .num_parents = 1, - .ops = &clk_regmap_div_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1571,6 +1457,22 @@ static const struct freq_tbl ftbl_nss_po - { } - }; - -+static const struct clk_parent_data gcc_xo_uniphy0_tx_rx_ubi32_bias[] = { -+ { .fw_name = "xo", .name = "xo" }, -+ { .name = "uniphy0_gcc_tx_clk" }, -+ { .name = "uniphy0_gcc_rx_clk" }, -+ { .hw = &ubi32_pll.clkr.hw }, -+ { .name = "bias_pll_cc_clk" }, -+}; -+ -+static const struct parent_map gcc_xo_uniphy0_tx_rx_ubi32_bias_map[] = { -+ { P_XO, 0 }, -+ { P_UNIPHY0_TX, 1 }, -+ { P_UNIPHY0_RX, 2 }, -+ { P_UBI32_PLL, 5 }, -+ { P_BIAS_PLL, 6 }, -+}; -+ - static struct clk_rcg2 nss_port1_tx_clk_src = { - .cmd_rcgr = 0x68028, - .freq_tbl = ftbl_nss_port1_tx_clk_src, -@@ -1578,8 +1480,8 @@ static struct clk_rcg2 nss_port1_tx_clk_ - .parent_map = gcc_xo_uniphy0_tx_rx_ubi32_bias_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "nss_port1_tx_clk_src", -- .parent_names = gcc_xo_uniphy0_tx_rx_ubi32_bias, -- .num_parents = 5, -+ .parent_data = gcc_xo_uniphy0_tx_rx_ubi32_bias, -+ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_tx_rx_ubi32_bias), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1591,9 +1493,8 @@ static struct clk_regmap_div nss_port1_t - .clkr = { - .hw.init = &(struct clk_init_data){ - .name = "nss_port1_tx_div_clk_src", -- .parent_names = (const char *[]){ -- "nss_port1_tx_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port1_tx_clk_src.clkr.hw }, - .num_parents = 1, - .ops = &clk_regmap_div_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1608,8 +1509,8 @@ static struct clk_rcg2 nss_port2_rx_clk_ - .parent_map = gcc_xo_uniphy0_rx_tx_ubi32_bias_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "nss_port2_rx_clk_src", -- .parent_names = gcc_xo_uniphy0_rx_tx_ubi32_bias, -- .num_parents = 5, -+ .parent_data = gcc_xo_uniphy0_rx_tx_ubi32_bias, -+ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_rx_tx_ubi32_bias), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1621,9 +1522,8 @@ static struct clk_regmap_div nss_port2_r - .clkr = { - .hw.init = &(struct clk_init_data){ - .name = "nss_port2_rx_div_clk_src", -- .parent_names = (const char *[]){ -- "nss_port2_rx_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port2_rx_clk_src.clkr.hw }, - .num_parents = 1, - .ops = &clk_regmap_div_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1638,8 +1538,8 @@ static struct clk_rcg2 nss_port2_tx_clk_ - .parent_map = gcc_xo_uniphy0_tx_rx_ubi32_bias_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "nss_port2_tx_clk_src", -- .parent_names = gcc_xo_uniphy0_tx_rx_ubi32_bias, -- .num_parents = 5, -+ .parent_data = gcc_xo_uniphy0_tx_rx_ubi32_bias, -+ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_tx_rx_ubi32_bias), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1651,9 +1551,8 @@ static struct clk_regmap_div nss_port2_t - .clkr = { - .hw.init = &(struct clk_init_data){ - .name = "nss_port2_tx_div_clk_src", -- .parent_names = (const char *[]){ -- "nss_port2_tx_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port2_tx_clk_src.clkr.hw }, - .num_parents = 1, - .ops = &clk_regmap_div_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1668,8 +1567,8 @@ static struct clk_rcg2 nss_port3_rx_clk_ - .parent_map = gcc_xo_uniphy0_rx_tx_ubi32_bias_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "nss_port3_rx_clk_src", -- .parent_names = gcc_xo_uniphy0_rx_tx_ubi32_bias, -- .num_parents = 5, -+ .parent_data = gcc_xo_uniphy0_rx_tx_ubi32_bias, -+ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_rx_tx_ubi32_bias), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1681,9 +1580,8 @@ static struct clk_regmap_div nss_port3_r - .clkr = { - .hw.init = &(struct clk_init_data){ - .name = "nss_port3_rx_div_clk_src", -- .parent_names = (const char *[]){ -- "nss_port3_rx_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port3_rx_clk_src.clkr.hw }, - .num_parents = 1, - .ops = &clk_regmap_div_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1698,8 +1596,8 @@ static struct clk_rcg2 nss_port3_tx_clk_ - .parent_map = gcc_xo_uniphy0_tx_rx_ubi32_bias_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "nss_port3_tx_clk_src", -- .parent_names = gcc_xo_uniphy0_tx_rx_ubi32_bias, -- .num_parents = 5, -+ .parent_data = gcc_xo_uniphy0_tx_rx_ubi32_bias, -+ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_tx_rx_ubi32_bias), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1711,9 +1609,8 @@ static struct clk_regmap_div nss_port3_t - .clkr = { - .hw.init = &(struct clk_init_data){ - .name = "nss_port3_tx_div_clk_src", -- .parent_names = (const char *[]){ -- "nss_port3_tx_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port3_tx_clk_src.clkr.hw }, - .num_parents = 1, - .ops = &clk_regmap_div_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1728,8 +1625,8 @@ static struct clk_rcg2 nss_port4_rx_clk_ - .parent_map = gcc_xo_uniphy0_rx_tx_ubi32_bias_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "nss_port4_rx_clk_src", -- .parent_names = gcc_xo_uniphy0_rx_tx_ubi32_bias, -- .num_parents = 5, -+ .parent_data = gcc_xo_uniphy0_rx_tx_ubi32_bias, -+ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_rx_tx_ubi32_bias), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1741,9 +1638,8 @@ static struct clk_regmap_div nss_port4_r - .clkr = { - .hw.init = &(struct clk_init_data){ - .name = "nss_port4_rx_div_clk_src", -- .parent_names = (const char *[]){ -- "nss_port4_rx_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port4_rx_clk_src.clkr.hw }, - .num_parents = 1, - .ops = &clk_regmap_div_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1758,8 +1654,8 @@ static struct clk_rcg2 nss_port4_tx_clk_ - .parent_map = gcc_xo_uniphy0_tx_rx_ubi32_bias_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "nss_port4_tx_clk_src", -- .parent_names = gcc_xo_uniphy0_tx_rx_ubi32_bias, -- .num_parents = 5, -+ .parent_data = gcc_xo_uniphy0_tx_rx_ubi32_bias, -+ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_tx_rx_ubi32_bias), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1771,9 +1667,8 @@ static struct clk_regmap_div nss_port4_t - .clkr = { - .hw.init = &(struct clk_init_data){ - .name = "nss_port4_tx_div_clk_src", -- .parent_names = (const char *[]){ -- "nss_port4_tx_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port4_tx_clk_src.clkr.hw }, - .num_parents = 1, - .ops = &clk_regmap_div_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1793,6 +1688,27 @@ static const struct freq_tbl ftbl_nss_po - { } - }; - -+static const struct clk_parent_data gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias[] = { -+ { .fw_name = "xo", .name = "xo" }, -+ { .name = "uniphy0_gcc_rx_clk" }, -+ { .name = "uniphy0_gcc_tx_clk" }, -+ { .name = "uniphy1_gcc_rx_clk" }, -+ { .name = "uniphy1_gcc_tx_clk" }, -+ { .hw = &ubi32_pll.clkr.hw }, -+ { .name = "bias_pll_cc_clk" }, -+}; -+ -+static const struct parent_map -+gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias_map[] = { -+ { P_XO, 0 }, -+ { P_UNIPHY0_RX, 1 }, -+ { P_UNIPHY0_TX, 2 }, -+ { P_UNIPHY1_RX, 3 }, -+ { P_UNIPHY1_TX, 4 }, -+ { P_UBI32_PLL, 5 }, -+ { P_BIAS_PLL, 6 }, -+}; -+ - static struct clk_rcg2 nss_port5_rx_clk_src = { - .cmd_rcgr = 0x68060, - .freq_tbl = ftbl_nss_port5_rx_clk_src, -@@ -1800,8 +1716,8 @@ static struct clk_rcg2 nss_port5_rx_clk_ - .parent_map = gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "nss_port5_rx_clk_src", -- .parent_names = gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias, -- .num_parents = 7, -+ .parent_data = gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias, -+ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1813,9 +1729,8 @@ static struct clk_regmap_div nss_port5_r - .clkr = { - .hw.init = &(struct clk_init_data){ - .name = "nss_port5_rx_div_clk_src", -- .parent_names = (const char *[]){ -- "nss_port5_rx_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port5_rx_clk_src.clkr.hw }, - .num_parents = 1, - .ops = &clk_regmap_div_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1835,6 +1750,27 @@ static const struct freq_tbl ftbl_nss_po - { } - }; - -+static const struct clk_parent_data gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias[] = { -+ { .fw_name = "xo", .name = "xo" }, -+ { .name = "uniphy0_gcc_tx_clk" }, -+ { .name = "uniphy0_gcc_rx_clk" }, -+ { .name = "uniphy1_gcc_tx_clk" }, -+ { .name = "uniphy1_gcc_rx_clk" }, -+ { .hw = &ubi32_pll.clkr.hw }, -+ { .name = "bias_pll_cc_clk" }, -+}; -+ -+static const struct parent_map -+gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias_map[] = { -+ { P_XO, 0 }, -+ { P_UNIPHY0_TX, 1 }, -+ { P_UNIPHY0_RX, 2 }, -+ { P_UNIPHY1_TX, 3 }, -+ { P_UNIPHY1_RX, 4 }, -+ { P_UBI32_PLL, 5 }, -+ { P_BIAS_PLL, 6 }, -+}; -+ - static struct clk_rcg2 nss_port5_tx_clk_src = { - .cmd_rcgr = 0x68068, - .freq_tbl = ftbl_nss_port5_tx_clk_src, -@@ -1842,8 +1778,8 @@ static struct clk_rcg2 nss_port5_tx_clk_ - .parent_map = gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "nss_port5_tx_clk_src", -- .parent_names = gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias, -- .num_parents = 7, -+ .parent_data = gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias, -+ .num_parents = ARRAY_SIZE(gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1855,9 +1791,8 @@ static struct clk_regmap_div nss_port5_t - .clkr = { - .hw.init = &(struct clk_init_data){ - .name = "nss_port5_tx_div_clk_src", -- .parent_names = (const char *[]){ -- "nss_port5_tx_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port5_tx_clk_src.clkr.hw }, - .num_parents = 1, - .ops = &clk_regmap_div_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1877,6 +1812,22 @@ static const struct freq_tbl ftbl_nss_po - { } - }; - -+static const struct clk_parent_data gcc_xo_uniphy2_rx_tx_ubi32_bias[] = { -+ { .fw_name = "xo", .name = "xo" }, -+ { .name = "uniphy2_gcc_rx_clk" }, -+ { .name = "uniphy2_gcc_tx_clk" }, -+ { .hw = &ubi32_pll.clkr.hw }, -+ { .name = "bias_pll_cc_clk" }, -+}; -+ -+static const struct parent_map gcc_xo_uniphy2_rx_tx_ubi32_bias_map[] = { -+ { P_XO, 0 }, -+ { P_UNIPHY2_RX, 1 }, -+ { P_UNIPHY2_TX, 2 }, -+ { P_UBI32_PLL, 5 }, -+ { P_BIAS_PLL, 6 }, -+}; -+ - static struct clk_rcg2 nss_port6_rx_clk_src = { - .cmd_rcgr = 0x68070, - .freq_tbl = ftbl_nss_port6_rx_clk_src, -@@ -1884,8 +1835,8 @@ static struct clk_rcg2 nss_port6_rx_clk_ - .parent_map = gcc_xo_uniphy2_rx_tx_ubi32_bias_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "nss_port6_rx_clk_src", -- .parent_names = gcc_xo_uniphy2_rx_tx_ubi32_bias, -- .num_parents = 5, -+ .parent_data = gcc_xo_uniphy2_rx_tx_ubi32_bias, -+ .num_parents = ARRAY_SIZE(gcc_xo_uniphy2_rx_tx_ubi32_bias), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1897,9 +1848,8 @@ static struct clk_regmap_div nss_port6_r - .clkr = { - .hw.init = &(struct clk_init_data){ - .name = "nss_port6_rx_div_clk_src", -- .parent_names = (const char *[]){ -- "nss_port6_rx_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port6_rx_clk_src.clkr.hw }, - .num_parents = 1, - .ops = &clk_regmap_div_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1919,6 +1869,22 @@ static const struct freq_tbl ftbl_nss_po - { } - }; - -+static const struct clk_parent_data gcc_xo_uniphy2_tx_rx_ubi32_bias[] = { -+ { .fw_name = "xo", .name = "xo" }, -+ { .name = "uniphy2_gcc_tx_clk" }, -+ { .name = "uniphy2_gcc_rx_clk" }, -+ { .hw = &ubi32_pll.clkr.hw }, -+ { .name = "bias_pll_cc_clk" }, -+}; -+ -+static const struct parent_map gcc_xo_uniphy2_tx_rx_ubi32_bias_map[] = { -+ { P_XO, 0 }, -+ { P_UNIPHY2_TX, 1 }, -+ { P_UNIPHY2_RX, 2 }, -+ { P_UBI32_PLL, 5 }, -+ { P_BIAS_PLL, 6 }, -+}; -+ - static struct clk_rcg2 nss_port6_tx_clk_src = { - .cmd_rcgr = 0x68078, - .freq_tbl = ftbl_nss_port6_tx_clk_src, -@@ -1926,8 +1892,8 @@ static struct clk_rcg2 nss_port6_tx_clk_ - .parent_map = gcc_xo_uniphy2_tx_rx_ubi32_bias_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "nss_port6_tx_clk_src", -- .parent_names = gcc_xo_uniphy2_tx_rx_ubi32_bias, -- .num_parents = 5, -+ .parent_data = gcc_xo_uniphy2_tx_rx_ubi32_bias, -+ .num_parents = ARRAY_SIZE(gcc_xo_uniphy2_tx_rx_ubi32_bias), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1939,9 +1905,8 @@ static struct clk_regmap_div nss_port6_t - .clkr = { - .hw.init = &(struct clk_init_data){ - .name = "nss_port6_tx_div_clk_src", -- .parent_names = (const char *[]){ -- "nss_port6_tx_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port6_tx_clk_src.clkr.hw }, - .num_parents = 1, - .ops = &clk_regmap_div_ops, - .flags = CLK_SET_RATE_PARENT, -@@ -1964,8 +1929,8 @@ static struct clk_rcg2 crypto_clk_src = - .parent_map = gcc_xo_gpll0_gpll0_out_main_div2_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "crypto_clk_src", -- .parent_names = gcc_xo_gpll0_gpll0_out_main_div2, -- .num_parents = 3, -+ .parent_data = gcc_xo_gpll0_gpll0_out_main_div2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll0_out_main_div2), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1975,6 +1940,22 @@ static struct freq_tbl ftbl_gp_clk_src[] - { } - }; - -+static const struct clk_parent_data gcc_xo_gpll0_gpll6_gpll0_sleep_clk[] = { -+ { .fw_name = "xo", .name = "xo" }, -+ { .hw = &gpll0.clkr.hw }, -+ { .hw = &gpll6.clkr.hw }, -+ { .hw = &gpll0_out_main_div2.hw }, -+ { .fw_name = "sleep_clk", .name = "sleep_clk" }, -+}; -+ -+static const struct parent_map gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map[] = { -+ { P_XO, 0 }, -+ { P_GPLL0, 1 }, -+ { P_GPLL6, 2 }, -+ { P_GPLL0_DIV2, 4 }, -+ { P_SLEEP_CLK, 6 }, -+}; -+ - static struct clk_rcg2 gp1_clk_src = { - .cmd_rcgr = 0x08004, - .freq_tbl = ftbl_gp_clk_src, -@@ -1983,8 +1964,8 @@ static struct clk_rcg2 gp1_clk_src = { - .parent_map = gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "gp1_clk_src", -- .parent_names = gcc_xo_gpll0_gpll6_gpll0_sleep_clk, -- .num_parents = 5, -+ .parent_data = gcc_xo_gpll0_gpll6_gpll0_sleep_clk, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll6_gpll0_sleep_clk), - .ops = &clk_rcg2_ops, - }, - }; -@@ -1997,8 +1978,8 @@ static struct clk_rcg2 gp2_clk_src = { - .parent_map = gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "gp2_clk_src", -- .parent_names = gcc_xo_gpll0_gpll6_gpll0_sleep_clk, -- .num_parents = 5, -+ .parent_data = gcc_xo_gpll0_gpll6_gpll0_sleep_clk, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll6_gpll0_sleep_clk), - .ops = &clk_rcg2_ops, - }, - }; -@@ -2011,8 +1992,8 @@ static struct clk_rcg2 gp3_clk_src = { - .parent_map = gcc_xo_gpll0_gpll6_gpll0_sleep_clk_map, - .clkr.hw.init = &(struct clk_init_data){ - .name = "gp3_clk_src", -- .parent_names = gcc_xo_gpll0_gpll6_gpll0_sleep_clk, -- .num_parents = 5, -+ .parent_data = gcc_xo_gpll0_gpll6_gpll0_sleep_clk, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0_gpll6_gpll0_sleep_clk), - .ops = &clk_rcg2_ops, - }, - }; -@@ -2024,9 +2005,8 @@ static struct clk_branch gcc_blsp1_ahb_c - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_blsp1_ahb_clk", -- .parent_names = (const char *[]){ -- "pcnoc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcnoc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2041,9 +2021,8 @@ static struct clk_branch gcc_blsp1_qup1_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_blsp1_qup1_i2c_apps_clk", -- .parent_names = (const char *[]){ -- "blsp1_qup1_i2c_apps_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &blsp1_qup1_i2c_apps_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2058,9 +2037,8 @@ static struct clk_branch gcc_blsp1_qup1_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_blsp1_qup1_spi_apps_clk", -- .parent_names = (const char *[]){ -- "blsp1_qup1_spi_apps_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &blsp1_qup1_spi_apps_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2075,9 +2053,8 @@ static struct clk_branch gcc_blsp1_qup2_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_blsp1_qup2_i2c_apps_clk", -- .parent_names = (const char *[]){ -- "blsp1_qup2_i2c_apps_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &blsp1_qup2_i2c_apps_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2092,9 +2069,8 @@ static struct clk_branch gcc_blsp1_qup2_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_blsp1_qup2_spi_apps_clk", -- .parent_names = (const char *[]){ -- "blsp1_qup2_spi_apps_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &blsp1_qup2_spi_apps_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2109,9 +2085,8 @@ static struct clk_branch gcc_blsp1_qup3_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_blsp1_qup3_i2c_apps_clk", -- .parent_names = (const char *[]){ -- "blsp1_qup3_i2c_apps_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &blsp1_qup3_i2c_apps_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2126,9 +2101,8 @@ static struct clk_branch gcc_blsp1_qup3_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_blsp1_qup3_spi_apps_clk", -- .parent_names = (const char *[]){ -- "blsp1_qup3_spi_apps_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &blsp1_qup3_spi_apps_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2143,9 +2117,8 @@ static struct clk_branch gcc_blsp1_qup4_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_blsp1_qup4_i2c_apps_clk", -- .parent_names = (const char *[]){ -- "blsp1_qup4_i2c_apps_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &blsp1_qup4_i2c_apps_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2160,9 +2133,8 @@ static struct clk_branch gcc_blsp1_qup4_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_blsp1_qup4_spi_apps_clk", -- .parent_names = (const char *[]){ -- "blsp1_qup4_spi_apps_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &blsp1_qup4_spi_apps_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2177,9 +2149,8 @@ static struct clk_branch gcc_blsp1_qup5_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_blsp1_qup5_i2c_apps_clk", -- .parent_names = (const char *[]){ -- "blsp1_qup5_i2c_apps_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &blsp1_qup5_i2c_apps_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2194,9 +2165,8 @@ static struct clk_branch gcc_blsp1_qup5_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_blsp1_qup5_spi_apps_clk", -- .parent_names = (const char *[]){ -- "blsp1_qup5_spi_apps_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &blsp1_qup5_spi_apps_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2211,9 +2181,8 @@ static struct clk_branch gcc_blsp1_qup6_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_blsp1_qup6_i2c_apps_clk", -- .parent_names = (const char *[]){ -- "blsp1_qup6_i2c_apps_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &blsp1_qup6_i2c_apps_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2228,9 +2197,8 @@ static struct clk_branch gcc_blsp1_qup6_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_blsp1_qup6_spi_apps_clk", -- .parent_names = (const char *[]){ -- "blsp1_qup6_spi_apps_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &blsp1_qup6_spi_apps_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2245,9 +2213,8 @@ static struct clk_branch gcc_blsp1_uart1 - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_blsp1_uart1_apps_clk", -- .parent_names = (const char *[]){ -- "blsp1_uart1_apps_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &blsp1_uart1_apps_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2262,9 +2229,8 @@ static struct clk_branch gcc_blsp1_uart2 - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_blsp1_uart2_apps_clk", -- .parent_names = (const char *[]){ -- "blsp1_uart2_apps_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &blsp1_uart2_apps_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2279,9 +2245,8 @@ static struct clk_branch gcc_blsp1_uart3 - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_blsp1_uart3_apps_clk", -- .parent_names = (const char *[]){ -- "blsp1_uart3_apps_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &blsp1_uart3_apps_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2296,9 +2261,8 @@ static struct clk_branch gcc_blsp1_uart4 - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_blsp1_uart4_apps_clk", -- .parent_names = (const char *[]){ -- "blsp1_uart4_apps_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &blsp1_uart4_apps_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2313,9 +2277,8 @@ static struct clk_branch gcc_blsp1_uart5 - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_blsp1_uart5_apps_clk", -- .parent_names = (const char *[]){ -- "blsp1_uart5_apps_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &blsp1_uart5_apps_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2330,9 +2293,8 @@ static struct clk_branch gcc_blsp1_uart6 - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_blsp1_uart6_apps_clk", -- .parent_names = (const char *[]){ -- "blsp1_uart6_apps_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &blsp1_uart6_apps_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2348,9 +2310,8 @@ static struct clk_branch gcc_prng_ahb_cl - .enable_mask = BIT(8), - .hw.init = &(struct clk_init_data){ - .name = "gcc_prng_ahb_clk", -- .parent_names = (const char *[]){ -- "pcnoc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcnoc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2365,9 +2326,8 @@ static struct clk_branch gcc_qpic_ahb_cl - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_qpic_ahb_clk", -- .parent_names = (const char *[]){ -- "pcnoc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcnoc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2382,9 +2342,8 @@ static struct clk_branch gcc_qpic_clk = - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_qpic_clk", -- .parent_names = (const char *[]){ -- "pcnoc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcnoc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2399,9 +2358,8 @@ static struct clk_branch gcc_pcie0_ahb_c - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_pcie0_ahb_clk", -- .parent_names = (const char *[]){ -- "pcnoc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcnoc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2416,9 +2374,8 @@ static struct clk_branch gcc_pcie0_aux_c - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_pcie0_aux_clk", -- .parent_names = (const char *[]){ -- "pcie0_aux_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcie0_aux_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2433,9 +2390,8 @@ static struct clk_branch gcc_pcie0_axi_m - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_pcie0_axi_m_clk", -- .parent_names = (const char *[]){ -- "pcie0_axi_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcie0_axi_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2450,9 +2406,8 @@ static struct clk_branch gcc_pcie0_axi_s - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_pcie0_axi_s_clk", -- .parent_names = (const char *[]){ -- "pcie0_axi_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcie0_axi_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2468,9 +2423,8 @@ static struct clk_branch gcc_pcie0_pipe_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_pcie0_pipe_clk", -- .parent_names = (const char *[]){ -- "pcie0_pipe_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcie0_pipe_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2485,9 +2439,8 @@ static struct clk_branch gcc_sys_noc_pci - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_sys_noc_pcie0_axi_clk", -- .parent_names = (const char *[]){ -- "pcie0_axi_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcie0_axi_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2502,9 +2455,8 @@ static struct clk_branch gcc_pcie1_ahb_c - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_pcie1_ahb_clk", -- .parent_names = (const char *[]){ -- "pcnoc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcnoc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2519,9 +2471,8 @@ static struct clk_branch gcc_pcie1_aux_c - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_pcie1_aux_clk", -- .parent_names = (const char *[]){ -- "pcie1_aux_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcie1_aux_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2536,9 +2487,8 @@ static struct clk_branch gcc_pcie1_axi_m - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_pcie1_axi_m_clk", -- .parent_names = (const char *[]){ -- "pcie1_axi_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcie1_axi_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2553,9 +2503,8 @@ static struct clk_branch gcc_pcie1_axi_s - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_pcie1_axi_s_clk", -- .parent_names = (const char *[]){ -- "pcie1_axi_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcie1_axi_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2571,9 +2520,8 @@ static struct clk_branch gcc_pcie1_pipe_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_pcie1_pipe_clk", -- .parent_names = (const char *[]){ -- "pcie1_pipe_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcie1_pipe_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2588,9 +2536,8 @@ static struct clk_branch gcc_sys_noc_pci - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_sys_noc_pcie1_axi_clk", -- .parent_names = (const char *[]){ -- "pcie1_axi_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcie1_axi_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2605,9 +2552,8 @@ static struct clk_branch gcc_usb0_aux_cl - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_usb0_aux_clk", -- .parent_names = (const char *[]){ -- "usb0_aux_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &usb0_aux_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2622,9 +2568,8 @@ static struct clk_branch gcc_sys_noc_usb - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_sys_noc_usb0_axi_clk", -- .parent_names = (const char *[]){ -- "usb0_master_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &usb0_master_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2639,9 +2584,8 @@ static struct clk_branch gcc_usb0_master - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_usb0_master_clk", -- .parent_names = (const char *[]){ -- "usb0_master_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &usb0_master_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2656,9 +2600,8 @@ static struct clk_branch gcc_usb0_mock_u - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_usb0_mock_utmi_clk", -- .parent_names = (const char *[]){ -- "usb0_mock_utmi_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &usb0_mock_utmi_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2673,9 +2616,8 @@ static struct clk_branch gcc_usb0_phy_cf - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_usb0_phy_cfg_ahb_clk", -- .parent_names = (const char *[]){ -- "pcnoc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcnoc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2691,9 +2633,8 @@ static struct clk_branch gcc_usb0_pipe_c - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_usb0_pipe_clk", -- .parent_names = (const char *[]){ -- "usb0_pipe_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &usb0_pipe_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2708,9 +2649,8 @@ static struct clk_branch gcc_usb0_sleep_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_usb0_sleep_clk", -- .parent_names = (const char *[]){ -- "gcc_sleep_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &gcc_sleep_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2725,9 +2665,8 @@ static struct clk_branch gcc_usb1_aux_cl - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_usb1_aux_clk", -- .parent_names = (const char *[]){ -- "usb1_aux_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &usb1_aux_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2742,9 +2681,8 @@ static struct clk_branch gcc_sys_noc_usb - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_sys_noc_usb1_axi_clk", -- .parent_names = (const char *[]){ -- "usb1_master_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &usb1_master_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2759,9 +2697,8 @@ static struct clk_branch gcc_usb1_master - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_usb1_master_clk", -- .parent_names = (const char *[]){ -- "usb1_master_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &usb1_master_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2776,9 +2713,8 @@ static struct clk_branch gcc_usb1_mock_u - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_usb1_mock_utmi_clk", -- .parent_names = (const char *[]){ -- "usb1_mock_utmi_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &usb1_mock_utmi_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2793,9 +2729,8 @@ static struct clk_branch gcc_usb1_phy_cf - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_usb1_phy_cfg_ahb_clk", -- .parent_names = (const char *[]){ -- "pcnoc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcnoc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2811,9 +2746,8 @@ static struct clk_branch gcc_usb1_pipe_c - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_usb1_pipe_clk", -- .parent_names = (const char *[]){ -- "usb1_pipe_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &usb1_pipe_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2828,9 +2762,8 @@ static struct clk_branch gcc_usb1_sleep_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_usb1_sleep_clk", -- .parent_names = (const char *[]){ -- "gcc_sleep_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &gcc_sleep_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2845,9 +2778,8 @@ static struct clk_branch gcc_sdcc1_ahb_c - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_sdcc1_ahb_clk", -- .parent_names = (const char *[]){ -- "pcnoc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcnoc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2862,9 +2794,8 @@ static struct clk_branch gcc_sdcc1_apps_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_sdcc1_apps_clk", -- .parent_names = (const char *[]){ -- "sdcc1_apps_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &sdcc1_apps_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2879,9 +2810,8 @@ static struct clk_branch gcc_sdcc1_ice_c - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_sdcc1_ice_core_clk", -- .parent_names = (const char *[]){ -- "sdcc1_ice_core_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &sdcc1_ice_core_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2896,9 +2826,8 @@ static struct clk_branch gcc_sdcc2_ahb_c - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_sdcc2_ahb_clk", -- .parent_names = (const char *[]){ -- "pcnoc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcnoc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2913,9 +2842,8 @@ static struct clk_branch gcc_sdcc2_apps_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_sdcc2_apps_clk", -- .parent_names = (const char *[]){ -- "sdcc2_apps_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &sdcc2_apps_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2930,9 +2858,8 @@ static struct clk_branch gcc_mem_noc_nss - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_mem_noc_nss_axi_clk", -- .parent_names = (const char *[]){ -- "nss_noc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_noc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2947,9 +2874,8 @@ static struct clk_branch gcc_nss_ce_apb_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_ce_apb_clk", -- .parent_names = (const char *[]){ -- "nss_ce_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ce_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2964,9 +2890,8 @@ static struct clk_branch gcc_nss_ce_axi_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_ce_axi_clk", -- .parent_names = (const char *[]){ -- "nss_ce_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ce_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2981,9 +2906,8 @@ static struct clk_branch gcc_nss_cfg_clk - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_cfg_clk", -- .parent_names = (const char *[]){ -- "pcnoc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcnoc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -2998,9 +2922,8 @@ static struct clk_branch gcc_nss_crypto_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_crypto_clk", -- .parent_names = (const char *[]){ -- "nss_crypto_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_crypto_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3015,9 +2938,8 @@ static struct clk_branch gcc_nss_csr_clk - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_csr_clk", -- .parent_names = (const char *[]){ -- "nss_ce_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ce_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3032,9 +2954,8 @@ static struct clk_branch gcc_nss_edma_cf - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_edma_cfg_clk", -- .parent_names = (const char *[]){ -- "nss_ppe_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ppe_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3049,9 +2970,8 @@ static struct clk_branch gcc_nss_edma_cl - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_edma_clk", -- .parent_names = (const char *[]){ -- "nss_ppe_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ppe_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3066,9 +2986,8 @@ static struct clk_branch gcc_nss_imem_cl - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_imem_clk", -- .parent_names = (const char *[]){ -- "nss_imem_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_imem_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3083,9 +3002,8 @@ static struct clk_branch gcc_nss_noc_clk - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_noc_clk", -- .parent_names = (const char *[]){ -- "nss_noc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_noc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3100,9 +3018,8 @@ static struct clk_branch gcc_nss_ppe_btq - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_ppe_btq_clk", -- .parent_names = (const char *[]){ -- "nss_ppe_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ppe_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3117,9 +3034,8 @@ static struct clk_branch gcc_nss_ppe_cfg - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_ppe_cfg_clk", -- .parent_names = (const char *[]){ -- "nss_ppe_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ppe_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3134,9 +3050,8 @@ static struct clk_branch gcc_nss_ppe_clk - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_ppe_clk", -- .parent_names = (const char *[]){ -- "nss_ppe_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ppe_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3151,9 +3066,8 @@ static struct clk_branch gcc_nss_ppe_ipe - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_ppe_ipe_clk", -- .parent_names = (const char *[]){ -- "nss_ppe_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ppe_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3168,9 +3082,8 @@ static struct clk_branch gcc_nss_ptp_ref - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_ptp_ref_clk", -- .parent_names = (const char *[]){ -- "nss_ppe_cdiv_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ppe_cdiv_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3186,9 +3099,8 @@ static struct clk_branch gcc_crypto_ppe_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_crypto_ppe_clk", -- .parent_names = (const char *[]){ -- "nss_ppe_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ppe_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3203,9 +3115,8 @@ static struct clk_branch gcc_nssnoc_ce_a - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nssnoc_ce_apb_clk", -- .parent_names = (const char *[]){ -- "nss_ce_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ce_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3220,9 +3131,8 @@ static struct clk_branch gcc_nssnoc_ce_a - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nssnoc_ce_axi_clk", -- .parent_names = (const char *[]){ -- "nss_ce_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ce_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3237,9 +3147,8 @@ static struct clk_branch gcc_nssnoc_cryp - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nssnoc_crypto_clk", -- .parent_names = (const char *[]){ -- "nss_crypto_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_crypto_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3254,9 +3163,8 @@ static struct clk_branch gcc_nssnoc_ppe_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nssnoc_ppe_cfg_clk", -- .parent_names = (const char *[]){ -- "nss_ppe_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ppe_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3271,9 +3179,8 @@ static struct clk_branch gcc_nssnoc_ppe_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nssnoc_ppe_clk", -- .parent_names = (const char *[]){ -- "nss_ppe_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ppe_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3288,9 +3195,8 @@ static struct clk_branch gcc_nssnoc_qosg - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nssnoc_qosgen_ref_clk", -- .parent_names = (const char *[]){ -- "gcc_xo_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &gcc_xo_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3305,9 +3211,8 @@ static struct clk_branch gcc_nssnoc_snoc - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nssnoc_snoc_clk", -- .parent_names = (const char *[]){ -- "system_noc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &system_noc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3322,9 +3227,8 @@ static struct clk_branch gcc_nssnoc_time - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nssnoc_timeout_ref_clk", -- .parent_names = (const char *[]){ -- "gcc_xo_div4_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &gcc_xo_div4_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3339,9 +3243,8 @@ static struct clk_branch gcc_nssnoc_ubi0 - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nssnoc_ubi0_ahb_clk", -- .parent_names = (const char *[]){ -- "nss_ce_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ce_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3356,9 +3259,8 @@ static struct clk_branch gcc_nssnoc_ubi1 - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nssnoc_ubi1_ahb_clk", -- .parent_names = (const char *[]){ -- "nss_ce_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ce_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3374,9 +3276,8 @@ static struct clk_branch gcc_ubi0_ahb_cl - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_ubi0_ahb_clk", -- .parent_names = (const char *[]){ -- "nss_ce_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ce_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3392,9 +3293,8 @@ static struct clk_branch gcc_ubi0_axi_cl - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_ubi0_axi_clk", -- .parent_names = (const char *[]){ -- "nss_noc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_noc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3410,9 +3310,8 @@ static struct clk_branch gcc_ubi0_nc_axi - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_ubi0_nc_axi_clk", -- .parent_names = (const char *[]){ -- "nss_noc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_noc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3428,9 +3327,8 @@ static struct clk_branch gcc_ubi0_core_c - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_ubi0_core_clk", -- .parent_names = (const char *[]){ -- "nss_ubi0_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ubi0_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3446,9 +3344,8 @@ static struct clk_branch gcc_ubi0_mpt_cl - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_ubi0_mpt_clk", -- .parent_names = (const char *[]){ -- "ubi_mpt_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &ubi_mpt_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3464,9 +3361,8 @@ static struct clk_branch gcc_ubi1_ahb_cl - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_ubi1_ahb_clk", -- .parent_names = (const char *[]){ -- "nss_ce_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ce_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3482,9 +3378,8 @@ static struct clk_branch gcc_ubi1_axi_cl - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_ubi1_axi_clk", -- .parent_names = (const char *[]){ -- "nss_noc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_noc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3500,9 +3395,8 @@ static struct clk_branch gcc_ubi1_nc_axi - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_ubi1_nc_axi_clk", -- .parent_names = (const char *[]){ -- "nss_noc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_noc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3518,9 +3412,8 @@ static struct clk_branch gcc_ubi1_core_c - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_ubi1_core_clk", -- .parent_names = (const char *[]){ -- "nss_ubi1_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ubi1_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3536,9 +3429,8 @@ static struct clk_branch gcc_ubi1_mpt_cl - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_ubi1_mpt_clk", -- .parent_names = (const char *[]){ -- "ubi_mpt_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &ubi_mpt_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3553,9 +3445,8 @@ static struct clk_branch gcc_cmn_12gpll_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_cmn_12gpll_ahb_clk", -- .parent_names = (const char *[]){ -- "pcnoc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcnoc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3570,9 +3461,8 @@ static struct clk_branch gcc_cmn_12gpll_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_cmn_12gpll_sys_clk", -- .parent_names = (const char *[]){ -- "gcc_xo_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &gcc_xo_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3587,9 +3477,8 @@ static struct clk_branch gcc_mdio_ahb_cl - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_mdio_ahb_clk", -- .parent_names = (const char *[]){ -- "pcnoc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcnoc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3604,9 +3493,8 @@ static struct clk_branch gcc_uniphy0_ahb - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_uniphy0_ahb_clk", -- .parent_names = (const char *[]){ -- "pcnoc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcnoc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3621,9 +3509,8 @@ static struct clk_branch gcc_uniphy0_sys - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_uniphy0_sys_clk", -- .parent_names = (const char *[]){ -- "gcc_xo_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &gcc_xo_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3638,9 +3525,8 @@ static struct clk_branch gcc_uniphy1_ahb - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_uniphy1_ahb_clk", -- .parent_names = (const char *[]){ -- "pcnoc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcnoc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3655,9 +3541,8 @@ static struct clk_branch gcc_uniphy1_sys - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_uniphy1_sys_clk", -- .parent_names = (const char *[]){ -- "gcc_xo_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &gcc_xo_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3672,9 +3557,8 @@ static struct clk_branch gcc_uniphy2_ahb - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_uniphy2_ahb_clk", -- .parent_names = (const char *[]){ -- "pcnoc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcnoc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3689,9 +3573,8 @@ static struct clk_branch gcc_uniphy2_sys - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_uniphy2_sys_clk", -- .parent_names = (const char *[]){ -- "gcc_xo_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &gcc_xo_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3706,9 +3589,8 @@ static struct clk_branch gcc_nss_port1_r - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_port1_rx_clk", -- .parent_names = (const char *[]){ -- "nss_port1_rx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port1_rx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3723,9 +3605,8 @@ static struct clk_branch gcc_nss_port1_t - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_port1_tx_clk", -- .parent_names = (const char *[]){ -- "nss_port1_tx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port1_tx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3740,9 +3621,8 @@ static struct clk_branch gcc_nss_port2_r - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_port2_rx_clk", -- .parent_names = (const char *[]){ -- "nss_port2_rx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port2_rx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3757,9 +3637,8 @@ static struct clk_branch gcc_nss_port2_t - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_port2_tx_clk", -- .parent_names = (const char *[]){ -- "nss_port2_tx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port2_tx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3774,9 +3653,8 @@ static struct clk_branch gcc_nss_port3_r - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_port3_rx_clk", -- .parent_names = (const char *[]){ -- "nss_port3_rx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port3_rx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3791,9 +3669,8 @@ static struct clk_branch gcc_nss_port3_t - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_port3_tx_clk", -- .parent_names = (const char *[]){ -- "nss_port3_tx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port3_tx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3808,9 +3685,8 @@ static struct clk_branch gcc_nss_port4_r - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_port4_rx_clk", -- .parent_names = (const char *[]){ -- "nss_port4_rx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port4_rx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3825,9 +3701,8 @@ static struct clk_branch gcc_nss_port4_t - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_port4_tx_clk", -- .parent_names = (const char *[]){ -- "nss_port4_tx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port4_tx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3842,9 +3717,8 @@ static struct clk_branch gcc_nss_port5_r - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_port5_rx_clk", -- .parent_names = (const char *[]){ -- "nss_port5_rx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port5_rx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3859,9 +3733,8 @@ static struct clk_branch gcc_nss_port5_t - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_port5_tx_clk", -- .parent_names = (const char *[]){ -- "nss_port5_tx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port5_tx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3876,9 +3749,8 @@ static struct clk_branch gcc_nss_port6_r - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_port6_rx_clk", -- .parent_names = (const char *[]){ -- "nss_port6_rx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port6_rx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3893,9 +3765,8 @@ static struct clk_branch gcc_nss_port6_t - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_nss_port6_tx_clk", -- .parent_names = (const char *[]){ -- "nss_port6_tx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port6_tx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3910,9 +3781,8 @@ static struct clk_branch gcc_port1_mac_c - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_port1_mac_clk", -- .parent_names = (const char *[]){ -- "nss_ppe_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ppe_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3927,9 +3797,8 @@ static struct clk_branch gcc_port2_mac_c - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_port2_mac_clk", -- .parent_names = (const char *[]){ -- "nss_ppe_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ppe_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3944,9 +3813,8 @@ static struct clk_branch gcc_port3_mac_c - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_port3_mac_clk", -- .parent_names = (const char *[]){ -- "nss_ppe_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ppe_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3961,9 +3829,8 @@ static struct clk_branch gcc_port4_mac_c - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_port4_mac_clk", -- .parent_names = (const char *[]){ -- "nss_ppe_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ppe_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3978,9 +3845,8 @@ static struct clk_branch gcc_port5_mac_c - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_port5_mac_clk", -- .parent_names = (const char *[]){ -- "nss_ppe_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ppe_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -3995,9 +3861,8 @@ static struct clk_branch gcc_port6_mac_c - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_port6_mac_clk", -- .parent_names = (const char *[]){ -- "nss_ppe_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_ppe_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -4012,9 +3877,8 @@ static struct clk_branch gcc_uniphy0_por - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_uniphy0_port1_rx_clk", -- .parent_names = (const char *[]){ -- "nss_port1_rx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port1_rx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -4029,9 +3893,8 @@ static struct clk_branch gcc_uniphy0_por - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_uniphy0_port1_tx_clk", -- .parent_names = (const char *[]){ -- "nss_port1_tx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port1_tx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -4046,9 +3909,8 @@ static struct clk_branch gcc_uniphy0_por - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_uniphy0_port2_rx_clk", -- .parent_names = (const char *[]){ -- "nss_port2_rx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port2_rx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -4063,9 +3925,8 @@ static struct clk_branch gcc_uniphy0_por - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_uniphy0_port2_tx_clk", -- .parent_names = (const char *[]){ -- "nss_port2_tx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port2_tx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -4080,9 +3941,8 @@ static struct clk_branch gcc_uniphy0_por - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_uniphy0_port3_rx_clk", -- .parent_names = (const char *[]){ -- "nss_port3_rx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port3_rx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -4097,9 +3957,8 @@ static struct clk_branch gcc_uniphy0_por - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_uniphy0_port3_tx_clk", -- .parent_names = (const char *[]){ -- "nss_port3_tx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port3_tx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -4114,9 +3973,8 @@ static struct clk_branch gcc_uniphy0_por - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_uniphy0_port4_rx_clk", -- .parent_names = (const char *[]){ -- "nss_port4_rx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port4_rx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -4131,9 +3989,8 @@ static struct clk_branch gcc_uniphy0_por - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_uniphy0_port4_tx_clk", -- .parent_names = (const char *[]){ -- "nss_port4_tx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port4_tx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -4148,9 +4005,8 @@ static struct clk_branch gcc_uniphy0_por - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_uniphy0_port5_rx_clk", -- .parent_names = (const char *[]){ -- "nss_port5_rx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port5_rx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -4165,9 +4021,8 @@ static struct clk_branch gcc_uniphy0_por - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_uniphy0_port5_tx_clk", -- .parent_names = (const char *[]){ -- "nss_port5_tx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port5_tx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -4182,9 +4037,8 @@ static struct clk_branch gcc_uniphy1_por - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_uniphy1_port5_rx_clk", -- .parent_names = (const char *[]){ -- "nss_port5_rx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port5_rx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -4199,9 +4053,8 @@ static struct clk_branch gcc_uniphy1_por - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_uniphy1_port5_tx_clk", -- .parent_names = (const char *[]){ -- "nss_port5_tx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port5_tx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -4216,9 +4069,8 @@ static struct clk_branch gcc_uniphy2_por - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_uniphy2_port6_rx_clk", -- .parent_names = (const char *[]){ -- "nss_port6_rx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port6_rx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -4233,9 +4085,8 @@ static struct clk_branch gcc_uniphy2_por - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_uniphy2_port6_tx_clk", -- .parent_names = (const char *[]){ -- "nss_port6_tx_div_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &nss_port6_tx_div_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -4251,9 +4102,8 @@ static struct clk_branch gcc_crypto_ahb_ - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_crypto_ahb_clk", -- .parent_names = (const char *[]){ -- "pcnoc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcnoc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -4269,9 +4119,8 @@ static struct clk_branch gcc_crypto_axi_ - .enable_mask = BIT(1), - .hw.init = &(struct clk_init_data){ - .name = "gcc_crypto_axi_clk", -- .parent_names = (const char *[]){ -- "pcnoc_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &pcnoc_clk_src.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -4287,9 +4136,8 @@ static struct clk_branch gcc_crypto_clk - .enable_mask = BIT(2), - .hw.init = &(struct clk_init_data){ - .name = "gcc_crypto_clk", -- .parent_names = (const char *[]){ -- "crypto_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &crypto_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -4304,9 +4152,8 @@ static struct clk_branch gcc_gp1_clk = { - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_gp1_clk", -- .parent_names = (const char *[]){ -- "gp1_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &gp1_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -4321,9 +4168,8 @@ static struct clk_branch gcc_gp2_clk = { - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_gp2_clk", -- .parent_names = (const char *[]){ -- "gp2_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &gp2_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -4338,9 +4184,8 @@ static struct clk_branch gcc_gp3_clk = { - .enable_mask = BIT(0), - .hw.init = &(struct clk_init_data){ - .name = "gcc_gp3_clk", -- .parent_names = (const char *[]){ -- "gp3_clk_src" -- }, -+ .parent_hws = (const struct clk_hw *[]){ -+ &gp3_clk_src.clkr.hw }, - .num_parents = 1, - .flags = CLK_SET_RATE_PARENT, - .ops = &clk_branch2_ops, -@@ -4362,7 +4207,7 @@ static struct clk_rcg2 pcie0_rchng_clk_s - .clkr.hw.init = &(struct clk_init_data){ - .name = "pcie0_rchng_clk_src", - .parent_data = gcc_xo_gpll0, -- .num_parents = 2, -+ .num_parents = ARRAY_SIZE(gcc_xo_gpll0), - .ops = &clk_rcg2_ops, - }, - }; diff --git a/target/linux/qualcommax/patches-6.6/0008-v6.2-arm64-dts-qcom-ipq6018-fix-NAND-node-name.patch b/target/linux/qualcommax/patches-6.6/0008-v6.2-arm64-dts-qcom-ipq6018-fix-NAND-node-name.patch deleted file mode 100644 index a87ae4b8ad0e..000000000000 --- a/target/linux/qualcommax/patches-6.6/0008-v6.2-arm64-dts-qcom-ipq6018-fix-NAND-node-name.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 8857b0ab6a562c473c5bded0efda9390b82a84d4 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Tue, 27 Sep 2022 22:12:17 +0200 -Subject: [PATCH] arm64: dts: qcom: ipq6018: fix NAND node name - -Per schema it should be nand-controller@79b0000 instead of nand@79b0000. -Fix it to match nand-controller.yaml requirements. - -Signed-off-by: Robert Marko -Reviewed-by: Krzysztof Kozlowski -Reviewed-by: Neil Armstrong -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220927201218.1264506-1-robimarko@gmail.com ---- - arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -348,7 +348,7 @@ - status = "disabled"; - }; - -- qpic_nand: nand@79b0000 { -+ qpic_nand: nand-controller@79b0000 { - compatible = "qcom,ipq6018-nand"; - reg = <0x0 0x079b0000 0x0 0x10000>; - #address-cells = <1>; diff --git a/target/linux/qualcommax/patches-6.6/0009-v6.2-dt-bindings-clock-qcom-ipq8074-add-missing-networkin.patch b/target/linux/qualcommax/patches-6.6/0009-v6.2-dt-bindings-clock-qcom-ipq8074-add-missing-networkin.patch deleted file mode 100644 index 75f16a167373..000000000000 --- a/target/linux/qualcommax/patches-6.6/0009-v6.2-dt-bindings-clock-qcom-ipq8074-add-missing-networkin.patch +++ /dev/null @@ -1,39 +0,0 @@ -From e78a40eb24187a8b4f9b89e2181f674df39c2013 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Mon, 7 Nov 2022 14:29:00 +0100 -Subject: [PATCH] dt-bindings: clock: qcom: ipq8074: add missing networking - resets - -Add bindings for the missing networking resets found in IPQ8074 GCC. - -Signed-off-by: Robert Marko -Acked-by: Krzysztof Kozlowski -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20221107132901.489240-2-robimarko@gmail.com ---- - include/dt-bindings/clock/qcom,gcc-ipq8074.h | 14 ++++++++++++++ - 1 file changed, 14 insertions(+) - ---- a/include/dt-bindings/clock/qcom,gcc-ipq8074.h -+++ b/include/dt-bindings/clock/qcom,gcc-ipq8074.h -@@ -367,6 +367,20 @@ - #define GCC_PCIE1_AHB_ARES 129 - #define GCC_PCIE1_AXI_MASTER_STICKY_ARES 130 - #define GCC_PCIE0_AXI_SLAVE_STICKY_ARES 131 -+#define GCC_PPE_FULL_RESET 132 -+#define GCC_UNIPHY0_SOFT_RESET 133 -+#define GCC_UNIPHY0_XPCS_RESET 134 -+#define GCC_UNIPHY1_SOFT_RESET 135 -+#define GCC_UNIPHY1_XPCS_RESET 136 -+#define GCC_UNIPHY2_SOFT_RESET 137 -+#define GCC_UNIPHY2_XPCS_RESET 138 -+#define GCC_EDMA_HW_RESET 139 -+#define GCC_NSSPORT1_RESET 140 -+#define GCC_NSSPORT2_RESET 141 -+#define GCC_NSSPORT3_RESET 142 -+#define GCC_NSSPORT4_RESET 143 -+#define GCC_NSSPORT5_RESET 144 -+#define GCC_NSSPORT6_RESET 145 - - #define USB0_GDSC 0 - #define USB1_GDSC 1 diff --git a/target/linux/qualcommax/patches-6.6/0010-v6.2-clk-qcom-ipq8074-add-missing-networking-resets.patch b/target/linux/qualcommax/patches-6.6/0010-v6.2-clk-qcom-ipq8074-add-missing-networking-resets.patch deleted file mode 100644 index 81014ab24c9b..000000000000 --- a/target/linux/qualcommax/patches-6.6/0010-v6.2-clk-qcom-ipq8074-add-missing-networking-resets.patch +++ /dev/null @@ -1,41 +0,0 @@ -From da76cb63d04dc22ed32123b8c1d084c006d67bfb Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Mon, 7 Nov 2022 14:29:01 +0100 -Subject: [PATCH] clk: qcom: ipq8074: add missing networking resets - -Downstream QCA 5.4 kernel defines networking resets which are not present -in the mainline kernel but are required for the networking drivers. - -So, port the downstream resets and avoid using magic values for mask, -construct mask for resets which require multiple bits to be set/cleared. - -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20221107132901.489240-3-robimarko@gmail.com ---- - drivers/clk/qcom/gcc-ipq8074.c | 14 ++++++++++++++ - 1 file changed, 14 insertions(+) - ---- a/drivers/clk/qcom/gcc-ipq8074.c -+++ b/drivers/clk/qcom/gcc-ipq8074.c -@@ -4665,6 +4665,20 @@ static const struct qcom_reset_map gcc_i - [GCC_PCIE1_AXI_SLAVE_ARES] = { 0x76040, 4 }, - [GCC_PCIE1_AHB_ARES] = { 0x76040, 5 }, - [GCC_PCIE1_AXI_MASTER_STICKY_ARES] = { 0x76040, 6 }, -+ [GCC_PPE_FULL_RESET] = { .reg = 0x68014, .bitmask = GENMASK(19, 16) }, -+ [GCC_UNIPHY0_SOFT_RESET] = { .reg = 0x56004, .bitmask = GENMASK(13, 4) | BIT(1) }, -+ [GCC_UNIPHY0_XPCS_RESET] = { 0x56004, 2 }, -+ [GCC_UNIPHY1_SOFT_RESET] = { .reg = 0x56104, .bitmask = GENMASK(5, 4) | BIT(1) }, -+ [GCC_UNIPHY1_XPCS_RESET] = { 0x56104, 2 }, -+ [GCC_UNIPHY2_SOFT_RESET] = { .reg = 0x56204, .bitmask = GENMASK(5, 4) | BIT(1) }, -+ [GCC_UNIPHY2_XPCS_RESET] = { 0x56204, 2 }, -+ [GCC_EDMA_HW_RESET] = { .reg = 0x68014, .bitmask = GENMASK(21, 20) }, -+ [GCC_NSSPORT1_RESET] = { .reg = 0x68014, .bitmask = BIT(24) | GENMASK(1, 0) }, -+ [GCC_NSSPORT2_RESET] = { .reg = 0x68014, .bitmask = BIT(25) | GENMASK(3, 2) }, -+ [GCC_NSSPORT3_RESET] = { .reg = 0x68014, .bitmask = BIT(26) | GENMASK(5, 4) }, -+ [GCC_NSSPORT4_RESET] = { .reg = 0x68014, .bitmask = BIT(27) | GENMASK(9, 8) }, -+ [GCC_NSSPORT5_RESET] = { .reg = 0x68014, .bitmask = BIT(28) | GENMASK(11, 10) }, -+ [GCC_NSSPORT6_RESET] = { .reg = 0x68014, .bitmask = BIT(29) | GENMASK(13, 12) }, - }; - - static struct gdsc *gcc_ipq8074_gdscs[] = { diff --git a/target/linux/qualcommax/patches-6.6/0011-v6.2-clk-qcom-ipq8074-populate-fw_name-for-all-parents.patch b/target/linux/qualcommax/patches-6.6/0011-v6.2-clk-qcom-ipq8074-populate-fw_name-for-all-parents.patch deleted file mode 100644 index 35a0a07c70b2..000000000000 --- a/target/linux/qualcommax/patches-6.6/0011-v6.2-clk-qcom-ipq8074-populate-fw_name-for-all-parents.patch +++ /dev/null @@ -1,152 +0,0 @@ -From 78936d46470938caa9a7ea529deeb36777b4f98e Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Wed, 16 Nov 2022 22:46:55 +0100 -Subject: [PATCH] clk: qcom: ipq8074: populate fw_name for all parents - -It appears that having only .name populated in parent_data for clocks -which are only globally searchable currently will not work as the clk core -won't copy that name if there is no .fw_name present as well. - -So, populate .fw_name for all parent clocks in parent_data. - -Fixes: ae55ad32e273 ("clk: qcom: ipq8074: convert to parent data") - -Co-developed-by: Christian Marangi -Signed-off-by: Christian Marangi -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20221116214655.1116467-1-robimarko@gmail.com ---- - drivers/clk/qcom/gcc-ipq8074.c | 52 +++++++++++++++++----------------- - 1 file changed, 26 insertions(+), 26 deletions(-) - ---- a/drivers/clk/qcom/gcc-ipq8074.c -+++ b/drivers/clk/qcom/gcc-ipq8074.c -@@ -674,7 +674,7 @@ static struct clk_rcg2 pcie0_aux_clk_src - }; - - static const struct clk_parent_data gcc_pcie20_phy0_pipe_clk_xo[] = { -- { .name = "pcie20_phy0_pipe_clk" }, -+ { .fw_name = "pcie0_pipe", .name = "pcie20_phy0_pipe_clk" }, - { .fw_name = "xo", .name = "xo" }, - }; - -@@ -727,7 +727,7 @@ static struct clk_rcg2 pcie1_aux_clk_src - }; - - static const struct clk_parent_data gcc_pcie20_phy1_pipe_clk_xo[] = { -- { .name = "pcie20_phy1_pipe_clk" }, -+ { .fw_name = "pcie1_pipe", .name = "pcie20_phy1_pipe_clk" }, - { .fw_name = "xo", .name = "xo" }, - }; - -@@ -1131,7 +1131,7 @@ static const struct freq_tbl ftbl_nss_no - - static const struct clk_parent_data gcc_xo_bias_pll_nss_noc_clk_gpll0_gpll2[] = { - { .fw_name = "xo", .name = "xo" }, -- { .name = "bias_pll_nss_noc_clk" }, -+ { .fw_name = "bias_pll_nss_noc_clk", .name = "bias_pll_nss_noc_clk" }, - { .hw = &gpll0.clkr.hw }, - { .hw = &gpll2.clkr.hw }, - }; -@@ -1356,7 +1356,7 @@ static const struct freq_tbl ftbl_nss_pp - - static const struct clk_parent_data gcc_xo_bias_gpll0_gpll4_nss_ubi32[] = { - { .fw_name = "xo", .name = "xo" }, -- { .name = "bias_pll_cc_clk" }, -+ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" }, - { .hw = &gpll0.clkr.hw }, - { .hw = &gpll4.clkr.hw }, - { .hw = &nss_crypto_pll.clkr.hw }, -@@ -1407,10 +1407,10 @@ static const struct freq_tbl ftbl_nss_po - - static const struct clk_parent_data gcc_xo_uniphy0_rx_tx_ubi32_bias[] = { - { .fw_name = "xo", .name = "xo" }, -- { .name = "uniphy0_gcc_rx_clk" }, -- { .name = "uniphy0_gcc_tx_clk" }, -+ { .fw_name = "uniphy0_gcc_rx_clk", .name = "uniphy0_gcc_rx_clk" }, -+ { .fw_name = "uniphy0_gcc_tx_clk", .name = "uniphy0_gcc_tx_clk" }, - { .hw = &ubi32_pll.clkr.hw }, -- { .name = "bias_pll_cc_clk" }, -+ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" }, - }; - - static const struct parent_map gcc_xo_uniphy0_rx_tx_ubi32_bias_map[] = { -@@ -1459,10 +1459,10 @@ static const struct freq_tbl ftbl_nss_po - - static const struct clk_parent_data gcc_xo_uniphy0_tx_rx_ubi32_bias[] = { - { .fw_name = "xo", .name = "xo" }, -- { .name = "uniphy0_gcc_tx_clk" }, -- { .name = "uniphy0_gcc_rx_clk" }, -+ { .fw_name = "uniphy0_gcc_tx_clk", .name = "uniphy0_gcc_tx_clk" }, -+ { .fw_name = "uniphy0_gcc_rx_clk", .name = "uniphy0_gcc_rx_clk" }, - { .hw = &ubi32_pll.clkr.hw }, -- { .name = "bias_pll_cc_clk" }, -+ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" }, - }; - - static const struct parent_map gcc_xo_uniphy0_tx_rx_ubi32_bias_map[] = { -@@ -1690,12 +1690,12 @@ static const struct freq_tbl ftbl_nss_po - - static const struct clk_parent_data gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias[] = { - { .fw_name = "xo", .name = "xo" }, -- { .name = "uniphy0_gcc_rx_clk" }, -- { .name = "uniphy0_gcc_tx_clk" }, -- { .name = "uniphy1_gcc_rx_clk" }, -- { .name = "uniphy1_gcc_tx_clk" }, -+ { .fw_name = "uniphy0_gcc_rx_clk", .name = "uniphy0_gcc_rx_clk" }, -+ { .fw_name = "uniphy0_gcc_tx_clk", .name = "uniphy0_gcc_tx_clk" }, -+ { .fw_name = "uniphy1_gcc_rx_clk", .name = "uniphy1_gcc_rx_clk" }, -+ { .fw_name = "uniphy1_gcc_tx_clk", .name = "uniphy1_gcc_tx_clk" }, - { .hw = &ubi32_pll.clkr.hw }, -- { .name = "bias_pll_cc_clk" }, -+ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" }, - }; - - static const struct parent_map -@@ -1752,12 +1752,12 @@ static const struct freq_tbl ftbl_nss_po - - static const struct clk_parent_data gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias[] = { - { .fw_name = "xo", .name = "xo" }, -- { .name = "uniphy0_gcc_tx_clk" }, -- { .name = "uniphy0_gcc_rx_clk" }, -- { .name = "uniphy1_gcc_tx_clk" }, -- { .name = "uniphy1_gcc_rx_clk" }, -+ { .fw_name = "uniphy0_gcc_tx_clk", .name = "uniphy0_gcc_tx_clk" }, -+ { .fw_name = "uniphy0_gcc_rx_clk", .name = "uniphy0_gcc_rx_clk" }, -+ { .fw_name = "uniphy1_gcc_tx_clk", .name = "uniphy1_gcc_tx_clk" }, -+ { .fw_name = "uniphy1_gcc_rx_clk", .name = "uniphy1_gcc_rx_clk" }, - { .hw = &ubi32_pll.clkr.hw }, -- { .name = "bias_pll_cc_clk" }, -+ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" }, - }; - - static const struct parent_map -@@ -1814,10 +1814,10 @@ static const struct freq_tbl ftbl_nss_po - - static const struct clk_parent_data gcc_xo_uniphy2_rx_tx_ubi32_bias[] = { - { .fw_name = "xo", .name = "xo" }, -- { .name = "uniphy2_gcc_rx_clk" }, -- { .name = "uniphy2_gcc_tx_clk" }, -+ { .fw_name = "uniphy2_gcc_rx_clk", .name = "uniphy2_gcc_rx_clk" }, -+ { .fw_name = "uniphy2_gcc_tx_clk", .name = "uniphy2_gcc_tx_clk" }, - { .hw = &ubi32_pll.clkr.hw }, -- { .name = "bias_pll_cc_clk" }, -+ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" }, - }; - - static const struct parent_map gcc_xo_uniphy2_rx_tx_ubi32_bias_map[] = { -@@ -1871,10 +1871,10 @@ static const struct freq_tbl ftbl_nss_po - - static const struct clk_parent_data gcc_xo_uniphy2_tx_rx_ubi32_bias[] = { - { .fw_name = "xo", .name = "xo" }, -- { .name = "uniphy2_gcc_tx_clk" }, -- { .name = "uniphy2_gcc_rx_clk" }, -+ { .fw_name = "uniphy2_gcc_tx_clk", .name = "uniphy2_gcc_tx_clk" }, -+ { .fw_name = "uniphy2_gcc_rx_clk", .name = "uniphy2_gcc_rx_clk" }, - { .hw = &ubi32_pll.clkr.hw }, -- { .name = "bias_pll_cc_clk" }, -+ { .fw_name = "bias_pll_cc_clk", .name = "bias_pll_cc_clk" }, - }; - - static const struct parent_map gcc_xo_uniphy2_tx_rx_ubi32_bias_map[] = { diff --git a/target/linux/qualcommax/patches-6.6/0012-v6.2-arm64-dts-qcom-ipq8074-pass-XO-and-sleep-clocks-to-G.patch b/target/linux/qualcommax/patches-6.6/0012-v6.2-arm64-dts-qcom-ipq8074-pass-XO-and-sleep-clocks-to-G.patch deleted file mode 100644 index 0f3fdfe4d4cf..000000000000 --- a/target/linux/qualcommax/patches-6.6/0012-v6.2-arm64-dts-qcom-ipq8074-pass-XO-and-sleep-clocks-to-G.patch +++ /dev/null @@ -1,36 +0,0 @@ -From 9033c3c86ea0dd35bd2ab957317573b755967298 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Sun, 30 Oct 2022 18:57:03 +0100 -Subject: [PATCH] arm64: dts: qcom: ipq8074: pass XO and sleep clocks to GCC - -Pass XO and sleep clocks to the GCC controller so it does not have to -find them by matching globaly by name. - -If not passed directly, driver maintains backwards compatibility by then -falling back to global lookup. - -Since we are here, set cell numbers in decimal instead of hex. - -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20221030175703.1103224-3-robimarko@gmail.com ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -363,9 +363,11 @@ - gcc: gcc@1800000 { - compatible = "qcom,gcc-ipq8074"; - reg = <0x01800000 0x80000>; -- #clock-cells = <0x1>; -+ clocks = <&xo>, <&sleep_clk>; -+ clock-names = "xo", "sleep_clk"; -+ #clock-cells = <1>; - #power-domain-cells = <1>; -- #reset-cells = <0x1>; -+ #reset-cells = <1>; - }; - - tcsr_mutex: hwlock@1905000 { diff --git a/target/linux/qualcommax/patches-6.6/0013-v6.2-arm64-dts-qcom-add-PMP8074-DTSI.patch b/target/linux/qualcommax/patches-6.6/0013-v6.2-arm64-dts-qcom-add-PMP8074-DTSI.patch deleted file mode 100644 index cd146420cf48..000000000000 --- a/target/linux/qualcommax/patches-6.6/0013-v6.2-arm64-dts-qcom-add-PMP8074-DTSI.patch +++ /dev/null @@ -1,149 +0,0 @@ -From fb76b808f8628215afebaf0f8af0bde635302590 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Fri, 19 Aug 2022 00:18:14 +0200 -Subject: [PATCH] arm64: dts: qcom: add PMP8074 DTSI - -PMP8074 is a companion PMIC to the Qualcomm IPQ8074 series that is -controlled via SPMI. - -Add DTSI for it providing GPIO, regulator, RTC and VADC support. - -RTC is disabled by default as there is no built-in battery so it will -loose time unless board vendor added a battery, so make it optional. - -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220818221815.346233-4-robimarko@gmail.com ---- - arch/arm64/boot/dts/qcom/pmp8074.dtsi | 125 ++++++++++++++++++++++++++ - 1 file changed, 125 insertions(+) - create mode 100644 arch/arm64/boot/dts/qcom/pmp8074.dtsi - ---- /dev/null -+++ b/arch/arm64/boot/dts/qcom/pmp8074.dtsi -@@ -0,0 +1,125 @@ -+// SPDX-License-Identifier: GPL-2.0-only OR BSD-3-Clause -+ -+#include -+#include -+ -+&spmi_bus { -+ pmic@0 { -+ compatible = "qcom,pmp8074", "qcom,spmi-pmic"; -+ reg = <0x0 SPMI_USID>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ pmp8074_adc: adc@3100 { -+ compatible = "qcom,spmi-adc-rev2"; -+ reg = <0x3100>; -+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ #io-channel-cells = <1>; -+ -+ ref-gnd@0 { -+ reg = ; -+ qcom,pre-scaling = <1 1>; -+ }; -+ -+ vref-1p25@1 { -+ reg = ; -+ qcom,pre-scaling = <1 1>; -+ }; -+ -+ vref-vadc@2 { -+ reg = ; -+ qcom,pre-scaling = <1 1>; -+ }; -+ -+ pmic_die: die-temp@6 { -+ reg = ; -+ qcom,pre-scaling = <1 1>; -+ }; -+ -+ xo_therm: xo-temp@76 { -+ reg = ; -+ qcom,ratiometric; -+ qcom,hw-settle-time = <200>; -+ qcom,pre-scaling = <1 1>; -+ }; -+ -+ pa_therm1: thermistor1@77 { -+ reg = ; -+ qcom,ratiometric; -+ qcom,hw-settle-time = <200>; -+ qcom,pre-scaling = <1 1>; -+ }; -+ -+ pa_therm2: thermistor2@78 { -+ reg = ; -+ qcom,ratiometric; -+ qcom,hw-settle-time = <200>; -+ qcom,pre-scaling = <1 1>; -+ }; -+ -+ pa_therm3: thermistor3@79 { -+ reg = ; -+ qcom,ratiometric; -+ qcom,hw-settle-time = <200>; -+ qcom,pre-scaling = <1 1>; -+ }; -+ -+ vph-pwr@131 { -+ reg = ; -+ qcom,pre-scaling = <1 3>; -+ }; -+ }; -+ -+ pmp8074_rtc: rtc@6000 { -+ compatible = "qcom,pm8941-rtc"; -+ reg = <0x6000>; -+ reg-names = "rtc", "alarm"; -+ interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>; -+ allow-set-time; -+ status = "disabled"; -+ }; -+ -+ pmp8074_gpios: gpio@c000 { -+ compatible = "qcom,pmp8074-gpio", "qcom,spmi-gpio"; -+ reg = <0xc000>; -+ gpio-controller; -+ #gpio-cells = <2>; -+ gpio-ranges = <&pmp8074_gpios 0 0 12>; -+ interrupt-controller; -+ #interrupt-cells = <2>; -+ }; -+ }; -+ -+ pmic@1 { -+ compatible = "qcom,pmp8074", "qcom,spmi-pmic"; -+ reg = <0x1 SPMI_USID>; -+ -+ regulators { -+ compatible = "qcom,pmp8074-regulators"; -+ -+ s3: s3 { -+ regulator-name = "vdd_s3"; -+ regulator-min-microvolt = <592000>; -+ regulator-max-microvolt = <1064000>; -+ regulator-always-on; -+ regulator-boot-on; -+ }; -+ -+ s4: s4 { -+ regulator-name = "vdd_s4"; -+ regulator-min-microvolt = <712000>; -+ regulator-max-microvolt = <992000>; -+ regulator-always-on; -+ regulator-boot-on; -+ }; -+ -+ l11: l11 { -+ regulator-name = "l11"; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <3300000>; -+ }; -+ }; -+ }; -+}; diff --git a/target/linux/qualcommax/patches-6.6/0014-v6.2-arm64-dts-qcom-ipq8074-hk01-add-VQMMC-supply.patch b/target/linux/qualcommax/patches-6.6/0014-v6.2-arm64-dts-qcom-ipq8074-hk01-add-VQMMC-supply.patch deleted file mode 100644 index ebd3763a58f7..000000000000 --- a/target/linux/qualcommax/patches-6.6/0014-v6.2-arm64-dts-qcom-ipq8074-hk01-add-VQMMC-supply.patch +++ /dev/null @@ -1,37 +0,0 @@ -From 2c394cfc1779886048feca7dc7f4075da5f6328c Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Fri, 19 Aug 2022 00:18:15 +0200 -Subject: [PATCH] arm64: dts: qcom: ipq8074-hk01: add VQMMC supply - -Since now we have control over the PMP8074 PMIC providing various system -voltages including L11 which provides the SDIO/eMMC I/O voltage set it as -the SDHCI VQMMC supply. - -This allows SDHCI controller to switch to 1.8V I/O mode and support high -speed modes like HS200 and HS400. - -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220818221815.346233-5-robimarko@gmail.com ---- - arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts -+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts -@@ -3,6 +3,7 @@ - /* Copyright (c) 2017, The Linux Foundation. All rights reserved. - */ - #include "ipq8074.dtsi" -+#include "pmp8074.dtsi" - - / { - model = "Qualcomm Technologies, Inc. IPQ8074-HK01"; -@@ -84,6 +85,7 @@ - - &sdhc_1 { - status = "okay"; -+ vqmmc-supply = <&l11>; - }; - - &qusb_phy_0 { diff --git a/target/linux/qualcommax/patches-6.6/0015-v6.2-arm64-dts-qcom-hk01-use-GPIO-flags-for-tlmm.patch b/target/linux/qualcommax/patches-6.6/0015-v6.2-arm64-dts-qcom-hk01-use-GPIO-flags-for-tlmm.patch deleted file mode 100644 index e08f6d1f3c63..000000000000 --- a/target/linux/qualcommax/patches-6.6/0015-v6.2-arm64-dts-qcom-hk01-use-GPIO-flags-for-tlmm.patch +++ /dev/null @@ -1,42 +0,0 @@ -From 82ceb86227b1fc15c76d5fc691b2bf425f1a63b3 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Mon, 7 Nov 2022 10:29:30 +0100 -Subject: [PATCH] arm64: dts: qcom: hk01: use GPIO flags for tlmm - -Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs instead of -harcoding the cell value. - -Signed-off-by: Robert Marko -Reviewed-by: Krzysztof Kozlowski -Reviewed-by: Konrad Dybcio -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20221107092930.33325-3-robimarko@gmail.com ---- - arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 5 +++-- - 1 file changed, 3 insertions(+), 2 deletions(-) - ---- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts -+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts -@@ -4,6 +4,7 @@ - */ - #include "ipq8074.dtsi" - #include "pmp8074.dtsi" -+#include - - / { - model = "Qualcomm Technologies, Inc. IPQ8074-HK01"; -@@ -52,12 +53,12 @@ - - &pcie0 { - status = "okay"; -- perst-gpios = <&tlmm 61 0x1>; -+ perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>; - }; - - &pcie1 { - status = "okay"; -- perst-gpios = <&tlmm 58 0x1>; -+ perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>; - }; - - &pcie_qmp0 { diff --git a/target/linux/qualcommax/patches-6.6/0016-v6.2-arm64-dts-qcom-ipq8074-Fix-up-comments.patch b/target/linux/qualcommax/patches-6.6/0016-v6.2-arm64-dts-qcom-ipq8074-Fix-up-comments.patch deleted file mode 100644 index a8bf2492f4a4..000000000000 --- a/target/linux/qualcommax/patches-6.6/0016-v6.2-arm64-dts-qcom-ipq8074-Fix-up-comments.patch +++ /dev/null @@ -1,82 +0,0 @@ -From 1b1c1423ca3e740984aa883512a72c4ea08fbe28 Mon Sep 17 00:00:00 2001 -From: Konrad Dybcio -Date: Mon, 7 Nov 2022 15:55:17 +0100 -Subject: [PATCH] arm64: dts: qcom: ipq8074-*: Fix up comments - -Make sure all multiline C-style commends begin with just '/*' with -the comment text starting on a new line. - -Also, fix up some whitespace within comments. - -Signed-off-by: Konrad Dybcio -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20221107145522.6706-8-konrad.dybcio@linaro.org ---- - arch/arm64/boot/dts/qcom/ipq8074-hk01.dts | 3 ++- - arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts | 3 ++- - arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts | 3 ++- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 12 ++++++------ - 4 files changed, 12 insertions(+), 9 deletions(-) - ---- a/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts -+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk01.dts -@@ -1,6 +1,7 @@ - // SPDX-License-Identifier: GPL-2.0-only - /dts-v1/; --/* Copyright (c) 2017, The Linux Foundation. All rights reserved. -+/* -+ * Copyright (c) 2017, The Linux Foundation. All rights reserved. - */ - #include "ipq8074.dtsi" - #include "pmp8074.dtsi" ---- a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts -+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c1.dts -@@ -1,5 +1,6 @@ - // SPDX-License-Identifier: GPL-2.0-only --/* Copyright (c) 2020 The Linux Foundation. All rights reserved. -+/* -+ * Copyright (c) 2020 The Linux Foundation. All rights reserved. - */ - /dts-v1/; - ---- a/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts -+++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10-c2.dts -@@ -1,6 +1,7 @@ - // SPDX-License-Identifier: GPL-2.0-only - /dts-v1/; --/* Copyright (c) 2020 The Linux Foundation. All rights reserved. -+/* -+ * Copyright (c) 2020 The Linux Foundation. All rights reserved. - */ - #include "ipq8074-hk10.dtsi" - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -129,10 +129,10 @@ - status = "disabled"; - - usb1_ssphy: phy@58200 { -- reg = <0x00058200 0x130>, /* Tx */ -+ reg = <0x00058200 0x130>, /* Tx */ - <0x00058400 0x200>, /* Rx */ -- <0x00058800 0x1f8>, /* PCS */ -- <0x00058600 0x044>; /* PCS misc*/ -+ <0x00058800 0x1f8>, /* PCS */ -+ <0x00058600 0x044>; /* PCS misc */ - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB1_PIPE_CLK>; -@@ -172,10 +172,10 @@ - status = "disabled"; - - usb0_ssphy: phy@78200 { -- reg = <0x00078200 0x130>, /* Tx */ -+ reg = <0x00078200 0x130>, /* Tx */ - <0x00078400 0x200>, /* Rx */ -- <0x00078800 0x1f8>, /* PCS */ -- <0x00078600 0x044>; /* PCS misc*/ -+ <0x00078800 0x1f8>, /* PCS */ -+ <0x00078600 0x044>; /* PCS misc */ - #phy-cells = <0>; - #clock-cells = <0>; - clocks = <&gcc GCC_USB0_PIPE_CLK>; diff --git a/target/linux/qualcommax/patches-6.6/0017-v6.2-arm64-dts-qcom-ipq8074-align-TLMM-pin-configuration-.patch b/target/linux/qualcommax/patches-6.6/0017-v6.2-arm64-dts-qcom-ipq8074-align-TLMM-pin-configuration-.patch deleted file mode 100644 index c9fef2cab4b8..000000000000 --- a/target/linux/qualcommax/patches-6.6/0017-v6.2-arm64-dts-qcom-ipq8074-align-TLMM-pin-configuration-.patch +++ /dev/null @@ -1,60 +0,0 @@ -From 5f20690f77878b1ba24ec88df01b92d5131a6780 Mon Sep 17 00:00:00 2001 -From: Krzysztof Kozlowski -Date: Tue, 8 Nov 2022 15:23:57 +0100 -Subject: [PATCH] arm64: dts: qcom: ipq8074: align TLMM pin configuration with - DT schema - -DT schema expects TLMM pin configuration nodes to be named with -'-state' suffix and their optional children with '-pins' suffix. - -Signed-off-by: Krzysztof Kozlowski -Reviewed-by: Konrad Dybcio -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20221108142357.67202-2-krzysztof.kozlowski@linaro.org ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 10 +++++----- - 1 file changed, 5 insertions(+), 5 deletions(-) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -320,35 +320,35 @@ - interrupt-controller; - #interrupt-cells = <0x2>; - -- serial_4_pins: serial4-pinmux { -+ serial_4_pins: serial4-state { - pins = "gpio23", "gpio24"; - function = "blsp4_uart1"; - drive-strength = <8>; - bias-disable; - }; - -- i2c_0_pins: i2c-0-pinmux { -+ i2c_0_pins: i2c-0-state { - pins = "gpio42", "gpio43"; - function = "blsp1_i2c"; - drive-strength = <8>; - bias-disable; - }; - -- spi_0_pins: spi-0-pins { -+ spi_0_pins: spi-0-state { - pins = "gpio38", "gpio39", "gpio40", "gpio41"; - function = "blsp0_spi"; - drive-strength = <8>; - bias-disable; - }; - -- hsuart_pins: hsuart-pins { -+ hsuart_pins: hsuart-state { - pins = "gpio46", "gpio47", "gpio48", "gpio49"; - function = "blsp2_uart"; - drive-strength = <8>; - bias-disable; - }; - -- qpic_pins: qpic-pins { -+ qpic_pins: qpic-state { - pins = "gpio1", "gpio3", "gpio4", - "gpio5", "gpio6", "gpio7", - "gpio8", "gpio10", "gpio11", diff --git a/target/linux/qualcommax/patches-6.6/0018-v6.2-arm64-dts-qcom-ipq6018-align-TLMM-pin-configuration-.patch b/target/linux/qualcommax/patches-6.6/0018-v6.2-arm64-dts-qcom-ipq6018-align-TLMM-pin-configuration-.patch deleted file mode 100644 index ceaf68bf7ace..000000000000 --- a/target/linux/qualcommax/patches-6.6/0018-v6.2-arm64-dts-qcom-ipq6018-align-TLMM-pin-configuration-.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 20afb6751739264ea41993877de93923911dfdc3 Mon Sep 17 00:00:00 2001 -From: Krzysztof Kozlowski -Date: Thu, 6 Oct 2022 14:46:27 +0200 -Subject: [PATCH] arm64: dts: qcom: ipq6018: align TLMM pin configuration with - DT schema - -DT schema expects TLMM pin configuration nodes to be named with -'-state' suffix and their optional children with '-pins' suffix. - -Signed-off-by: Krzysztof Kozlowski -Reviewed-by: Bjorn Andersson -Reviewed-by: Konrad Dybcio -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20221006124659.217540-3-krzysztof.kozlowski@linaro.org ---- - arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 4 ++-- - arch/arm64/boot/dts/qcom/ipq6018.dtsi | 4 ++-- - 2 files changed, 4 insertions(+), 4 deletions(-) - ---- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts -+++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts -@@ -51,13 +51,13 @@ - }; - - &tlmm { -- i2c_1_pins: i2c-1-pins { -+ i2c_1_pins: i2c-1-state { - pins = "gpio42", "gpio43"; - function = "blsp2_i2c"; - drive-strength = <8>; - }; - -- spi_0_pins: spi-0-pins { -+ spi_0_pins: spi-0-state { - pins = "gpio38", "gpio39", "gpio40", "gpio41"; - function = "blsp0_spi"; - drive-strength = <8>; ---- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -218,14 +218,14 @@ - interrupt-controller; - #interrupt-cells = <2>; - -- serial_3_pins: serial3-pinmux { -+ serial_3_pins: serial3-state { - pins = "gpio44", "gpio45"; - function = "blsp2_uart"; - drive-strength = <8>; - bias-pull-down; - }; - -- qpic_pins: qpic-pins { -+ qpic_pins: qpic-state { - pins = "gpio1", "gpio3", "gpio4", - "gpio5", "gpio6", "gpio7", - "gpio8", "gpio10", "gpio11", diff --git a/target/linux/qualcommax/patches-6.6/0019-v6.3-arm64-dts-qcom-ipq8074-set-Gen2-PCIe-pcie-max-link-s.patch b/target/linux/qualcommax/patches-6.6/0019-v6.3-arm64-dts-qcom-ipq8074-set-Gen2-PCIe-pcie-max-link-s.patch deleted file mode 100644 index 2578aa934302..000000000000 --- a/target/linux/qualcommax/patches-6.6/0019-v6.3-arm64-dts-qcom-ipq8074-set-Gen2-PCIe-pcie-max-link-s.patch +++ /dev/null @@ -1,24 +0,0 @@ -From a4748d2850783d36f77ccf2b5fcc86ccf1800ef1 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Wed, 16 Nov 2022 22:48:36 +0100 -Subject: [PATCH] arm64: dts: qcom: ipq8074: set Gen2 PCIe pcie max-link-speed - -Add the generic 'max-link-speed' property to describe the Gen2 PCIe link -generation limit. -This allows the generic DWC code to configure the link speed correctly. - -Signed-off-by: Robert Marko ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -768,6 +768,7 @@ - linux,pci-domain = <1>; - bus-range = <0x00 0xff>; - num-lanes = <1>; -+ max-link-speed = <2>; - #address-cells = <3>; - #size-cells = <2>; - diff --git a/target/linux/qualcommax/patches-6.6/0020-v6.3-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch b/target/linux/qualcommax/patches-6.6/0020-v6.3-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch deleted file mode 100644 index 3d5c2182e9b5..000000000000 --- a/target/linux/qualcommax/patches-6.6/0020-v6.3-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch +++ /dev/null @@ -1,26 +0,0 @@ -From f356132229b18ceef5d5ef9103bbaa9bdeb84c8d Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Fri, 13 Jan 2023 17:44:47 +0100 -Subject: [PATCH] PCI: qcom: Add IPQ8074 Gen3 port support - -IPQ8074 has one Gen2 and one Gen3 port, with Gen2 port already supported. -Add compatible for Gen3 port which uses the same controller as IPQ6018. - -Link: https://lore.kernel.org/r/20230113164449.906002-7-robimarko@gmail.com -Signed-off-by: Robert Marko -Signed-off-by: Lorenzo Pieralisi -Signed-off-by: Bjorn Helgaas ---- - drivers/pci/controller/dwc/pcie-qcom.c | 1 + - 1 file changed, 1 insertion(+) - ---- a/drivers/pci/controller/dwc/pcie-qcom.c -+++ b/drivers/pci/controller/dwc/pcie-qcom.c -@@ -1762,6 +1762,7 @@ static const struct of_device_id qcom_pc - { .compatible = "qcom,pcie-ipq8064", .data = &cfg_2_1_0 }, - { .compatible = "qcom,pcie-ipq8064-v2", .data = &cfg_2_1_0 }, - { .compatible = "qcom,pcie-ipq8074", .data = &cfg_2_3_3 }, -+ { .compatible = "qcom,pcie-ipq8074-gen3", .data = &cfg_2_9_0 }, - { .compatible = "qcom,pcie-msm8996", .data = &cfg_2_3_2 }, - { .compatible = "qcom,pcie-qcs404", .data = &cfg_2_4_0 }, - { .compatible = "qcom,pcie-sa8540p", .data = &cfg_1_9_0 }, diff --git a/target/linux/qualcommax/patches-6.6/0021-v6.3-clk-qcom-ipq8074-populate-fw_name-for-usb3phy-s.patch b/target/linux/qualcommax/patches-6.6/0021-v6.3-clk-qcom-ipq8074-populate-fw_name-for-usb3phy-s.patch deleted file mode 100644 index e0e8125ba654..000000000000 --- a/target/linux/qualcommax/patches-6.6/0021-v6.3-clk-qcom-ipq8074-populate-fw_name-for-usb3phy-s.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 614d31c231c7707322b643f409eeb7e28adc7f8c Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Sun, 8 Jan 2023 13:36:28 +0100 -Subject: [PATCH] clk: qcom: ipq8074: populate fw_name for usb3phy-s - -Having only .name populated in parent_data for clocks which are only -globally searchable currently will not work as the clk core won't copy -that name if there is no .fw_name present as well. - -So, populate .fw_name for usb3phy clocks in parent_data as they were -missed by me in ("clk: qcom: ipq8074: populate fw_name for all parents"). - -Fixes: ae55ad32e273 ("clk: qcom: ipq8074: convert to parent data") -Signed-off-by: Robert Marko ---- - drivers/clk/qcom/gcc-ipq8074.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/drivers/clk/qcom/gcc-ipq8074.c -+++ b/drivers/clk/qcom/gcc-ipq8074.c -@@ -928,7 +928,7 @@ static struct clk_rcg2 usb0_mock_utmi_cl - }; - - static const struct clk_parent_data gcc_usb3phy_0_cc_pipe_clk_xo[] = { -- { .name = "usb3phy_0_cc_pipe_clk" }, -+ { .fw_name = "usb3phy_0_cc_pipe_clk", .name = "usb3phy_0_cc_pipe_clk" }, - { .fw_name = "xo", .name = "xo" }, - }; - -@@ -996,7 +996,7 @@ static struct clk_rcg2 usb1_mock_utmi_cl - }; - - static const struct clk_parent_data gcc_usb3phy_1_cc_pipe_clk_xo[] = { -- { .name = "usb3phy_1_cc_pipe_clk" }, -+ { .fw_name = "usb3phy_1_cc_pipe_clk", .name = "usb3phy_1_cc_pipe_clk" }, - { .fw_name = "xo", .name = "xo" }, - }; - diff --git a/target/linux/qualcommax/patches-6.6/0022-v6.4-arm64-dts-qcom-ipq8074-add-compatible-fallback-to.patch b/target/linux/qualcommax/patches-6.6/0022-v6.4-arm64-dts-qcom-ipq8074-add-compatible-fallback-to.patch deleted file mode 100644 index f85be793cde7..000000000000 --- a/target/linux/qualcommax/patches-6.6/0022-v6.4-arm64-dts-qcom-ipq8074-add-compatible-fallback-to.patch +++ /dev/null @@ -1,26 +0,0 @@ -From d93bd4630ce163f3761aedc0b342b072bee6db6b Mon Sep 17 00:00:00 2001 -From: Krzysztof Kozlowski -Date: Wed, 22 Mar 2023 18:41:40 +0100 -Subject: [PATCH] arm64: dts: qcom: ipq8074: add compatible fallback to mailbox - -IPQ8074 mailbox is compatible with IPQ6018. - -Signed-off-by: Krzysztof Kozlowski -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20230322174148.810938-4-krzysztof.kozlowski@linaro.org ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -682,7 +682,8 @@ - }; - - apcs_glb: mailbox@b111000 { -- compatible = "qcom,ipq8074-apcs-apps-global"; -+ compatible = "qcom,ipq8074-apcs-apps-global", -+ "qcom,ipq6018-apcs-apps-global"; - reg = <0x0b111000 0x1000>; - clocks = <&a53pll>, <&xo>; - clock-names = "pll", "xo"; diff --git a/target/linux/qualcommax/patches-6.6/0023-v6.5-arm64-dts-qcom-ipq8074-add-critical-thermal-trips.patch b/target/linux/qualcommax/patches-6.6/0023-v6.5-arm64-dts-qcom-ipq8074-add-critical-thermal-trips.patch deleted file mode 100644 index 737bb0675233..000000000000 --- a/target/linux/qualcommax/patches-6.6/0023-v6.5-arm64-dts-qcom-ipq8074-add-critical-thermal-trips.patch +++ /dev/null @@ -1,199 +0,0 @@ -From 56d3067cb694ba60d654e7f5ef231b6fabc4697f Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Wed, 7 Jun 2023 20:44:48 +0200 -Subject: [PATCH] arm64: dts: qcom: ipq8074: add critical thermal trips - -According to bindings, thermal zones must have associated trips as well. -Since we currently dont have CPUFreq support and thus no passive cooling -lets start by defining critical trips to protect the devices against -severe overheating. - -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20230607184448.2512179-1-robimarko@gmail.com ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 96 +++++++++++++++++++++++++++ - 1 file changed, 96 insertions(+) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -899,6 +899,14 @@ - polling-delay = <1000>; - - thermal-sensors = <&tsens 4>; -+ -+ trips { -+ nss-top-crit { -+ temperature = <110000>; -+ hysteresis = <1000>; -+ type = "critical"; -+ }; -+ }; - }; - - nss0-thermal { -@@ -906,6 +914,14 @@ - polling-delay = <1000>; - - thermal-sensors = <&tsens 5>; -+ -+ trips { -+ nss-0-crit { -+ temperature = <110000>; -+ hysteresis = <1000>; -+ type = "critical"; -+ }; -+ }; - }; - - nss1-thermal { -@@ -913,6 +929,14 @@ - polling-delay = <1000>; - - thermal-sensors = <&tsens 6>; -+ -+ trips { -+ nss-1-crit { -+ temperature = <110000>; -+ hysteresis = <1000>; -+ type = "critical"; -+ }; -+ }; - }; - - wcss-phya0-thermal { -@@ -920,6 +944,14 @@ - polling-delay = <1000>; - - thermal-sensors = <&tsens 7>; -+ -+ trips { -+ wcss-phya0-crit { -+ temperature = <110000>; -+ hysteresis = <1000>; -+ type = "critical"; -+ }; -+ }; - }; - - wcss-phya1-thermal { -@@ -927,6 +959,14 @@ - polling-delay = <1000>; - - thermal-sensors = <&tsens 8>; -+ -+ trips { -+ wcss-phya1-crit { -+ temperature = <110000>; -+ hysteresis = <1000>; -+ type = "critical"; -+ }; -+ }; - }; - - cpu0_thermal: cpu0-thermal { -@@ -934,6 +974,14 @@ - polling-delay = <1000>; - - thermal-sensors = <&tsens 9>; -+ -+ trips { -+ cpu0-crit { -+ temperature = <110000>; -+ hysteresis = <1000>; -+ type = "critical"; -+ }; -+ }; - }; - - cpu1_thermal: cpu1-thermal { -@@ -941,6 +989,14 @@ - polling-delay = <1000>; - - thermal-sensors = <&tsens 10>; -+ -+ trips { -+ cpu1-crit { -+ temperature = <110000>; -+ hysteresis = <1000>; -+ type = "critical"; -+ }; -+ }; - }; - - cpu2_thermal: cpu2-thermal { -@@ -948,6 +1004,14 @@ - polling-delay = <1000>; - - thermal-sensors = <&tsens 11>; -+ -+ trips { -+ cpu2-crit { -+ temperature = <110000>; -+ hysteresis = <1000>; -+ type = "critical"; -+ }; -+ }; - }; - - cpu3_thermal: cpu3-thermal { -@@ -955,6 +1019,14 @@ - polling-delay = <1000>; - - thermal-sensors = <&tsens 12>; -+ -+ trips { -+ cpu3-crit { -+ temperature = <110000>; -+ hysteresis = <1000>; -+ type = "critical"; -+ }; -+ }; - }; - - cluster_thermal: cluster-thermal { -@@ -962,6 +1034,14 @@ - polling-delay = <1000>; - - thermal-sensors = <&tsens 13>; -+ -+ trips { -+ cluster-crit { -+ temperature = <110000>; -+ hysteresis = <1000>; -+ type = "critical"; -+ }; -+ }; - }; - - wcss-phyb0-thermal { -@@ -969,6 +1049,14 @@ - polling-delay = <1000>; - - thermal-sensors = <&tsens 14>; -+ -+ trips { -+ wcss-phyb0-crit { -+ temperature = <110000>; -+ hysteresis = <1000>; -+ type = "critical"; -+ }; -+ }; - }; - - wcss-phyb1-thermal { -@@ -976,6 +1064,14 @@ - polling-delay = <1000>; - - thermal-sensors = <&tsens 15>; -+ -+ trips { -+ wcss-phyb1-crit { -+ temperature = <110000>; -+ hysteresis = <1000>; -+ type = "critical"; -+ }; -+ }; - }; - }; - }; diff --git a/target/linux/qualcommax/patches-6.6/0024-v6.7-dt-bindings-arm-qcom-ids-Add-IDs-for-IPQ8174-family.patch b/target/linux/qualcommax/patches-6.6/0024-v6.7-dt-bindings-arm-qcom-ids-Add-IDs-for-IPQ8174-family.patch index 4eb0f097cc4c..c1381a7bf3cf 100644 --- a/target/linux/qualcommax/patches-6.6/0024-v6.7-dt-bindings-arm-qcom-ids-Add-IDs-for-IPQ8174-family.patch +++ b/target/linux/qualcommax/patches-6.6/0024-v6.7-dt-bindings-arm-qcom-ids-Add-IDs-for-IPQ8174-family.patch @@ -17,7 +17,7 @@ Signed-off-by: Bjorn Andersson --- a/include/dt-bindings/arm/qcom,ids.h +++ b/include/dt-bindings/arm/qcom,ids.h -@@ -121,6 +121,9 @@ +@@ -203,6 +203,9 @@ #define QCOM_ID_SM6125 394 #define QCOM_ID_IPQ8070A 395 #define QCOM_ID_IPQ8071A 396 @@ -26,4 +26,4 @@ Signed-off-by: Bjorn Andersson +#define QCOM_ID_IPQ8174 399 #define QCOM_ID_IPQ6018 402 #define QCOM_ID_IPQ6028 403 - #define QCOM_ID_IPQ6000 421 + #define QCOM_ID_SDM429W 416 diff --git a/target/linux/qualcommax/patches-6.6/0025-v6.7-cpufreq-qcom-nvmem-add-support-for-IPQ6018.patch b/target/linux/qualcommax/patches-6.6/0025-v6.7-cpufreq-qcom-nvmem-add-support-for-IPQ6018.patch index 63e2f22db7db..6b305cc2823e 100644 --- a/target/linux/qualcommax/patches-6.6/0025-v6.7-cpufreq-qcom-nvmem-add-support-for-IPQ6018.patch +++ b/target/linux/qualcommax/patches-6.6/0025-v6.7-cpufreq-qcom-nvmem-add-support-for-IPQ6018.patch @@ -25,9 +25,9 @@ Signed-off-by: Viresh Kumar --- a/drivers/cpufreq/cpufreq-dt-platdev.c +++ b/drivers/cpufreq/cpufreq-dt-platdev.c -@@ -163,6 +163,7 @@ static const struct of_device_id blockli - { .compatible = "ti,dra7", }, - { .compatible = "ti,omap3", }, +@@ -177,6 +177,7 @@ static const struct of_device_id blockli + { .compatible = "ti,am625", }, + { .compatible = "ti,am62a7", }, + { .compatible = "qcom,ipq6018", }, { .compatible = "qcom,ipq8064", }, @@ -35,7 +35,7 @@ Signed-off-by: Viresh Kumar { .compatible = "qcom,msm8974", }, --- a/drivers/cpufreq/qcom-cpufreq-nvmem.c +++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c -@@ -31,6 +31,8 @@ +@@ -30,6 +30,8 @@ #include @@ -44,7 +44,7 @@ Signed-off-by: Viresh Kumar struct qcom_cpufreq_drv; struct qcom_cpufreq_match_data { -@@ -204,6 +206,57 @@ len_error: +@@ -203,6 +205,57 @@ len_error: return ret; } @@ -102,7 +102,7 @@ Signed-off-by: Viresh Kumar static const struct qcom_cpufreq_match_data match_data_kryo = { .get_version = qcom_cpufreq_kryo_name_version, }; -@@ -218,6 +271,10 @@ static const struct qcom_cpufreq_match_d +@@ -217,6 +270,10 @@ static const struct qcom_cpufreq_match_d .genpd_names = qcs404_genpd_names, }; @@ -113,7 +113,7 @@ Signed-off-by: Viresh Kumar static int qcom_cpufreq_probe(struct platform_device *pdev) { struct qcom_cpufreq_drv *drv; -@@ -362,6 +419,7 @@ static const struct of_device_id qcom_cp +@@ -359,6 +416,7 @@ static const struct of_device_id qcom_cp { .compatible = "qcom,apq8096", .data = &match_data_kryo }, { .compatible = "qcom,msm8996", .data = &match_data_kryo }, { .compatible = "qcom,qcs404", .data = &match_data_qcs404 }, diff --git a/target/linux/qualcommax/patches-6.6/0026-v6.7-cpufreq-qcom-nvmem-add-support-for-IPQ8074.patch b/target/linux/qualcommax/patches-6.6/0026-v6.7-cpufreq-qcom-nvmem-add-support-for-IPQ8074.patch index cbd7b770f4e7..8ff3b5f9b17d 100644 --- a/target/linux/qualcommax/patches-6.6/0026-v6.7-cpufreq-qcom-nvmem-add-support-for-IPQ8074.patch +++ b/target/linux/qualcommax/patches-6.6/0026-v6.7-cpufreq-qcom-nvmem-add-support-for-IPQ8074.patch @@ -25,7 +25,7 @@ Signed-off-by: Viresh Kumar --- a/drivers/cpufreq/cpufreq-dt-platdev.c +++ b/drivers/cpufreq/cpufreq-dt-platdev.c -@@ -165,6 +165,7 @@ static const struct of_device_id blockli +@@ -179,6 +179,7 @@ static const struct of_device_id blockli { .compatible = "qcom,ipq6018", }, { .compatible = "qcom,ipq8064", }, @@ -35,7 +35,7 @@ Signed-off-by: Viresh Kumar { .compatible = "qcom,msm8960", }, --- a/drivers/cpufreq/qcom-cpufreq-nvmem.c +++ b/drivers/cpufreq/qcom-cpufreq-nvmem.c -@@ -33,6 +33,11 @@ +@@ -32,6 +32,11 @@ #define IPQ6000_VERSION BIT(2) @@ -47,7 +47,7 @@ Signed-off-by: Viresh Kumar struct qcom_cpufreq_drv; struct qcom_cpufreq_match_data { -@@ -257,6 +262,44 @@ static int qcom_cpufreq_ipq6018_name_ver +@@ -256,6 +261,44 @@ static int qcom_cpufreq_ipq6018_name_ver return 0; } @@ -92,7 +92,7 @@ Signed-off-by: Viresh Kumar static const struct qcom_cpufreq_match_data match_data_kryo = { .get_version = qcom_cpufreq_kryo_name_version, }; -@@ -275,6 +318,10 @@ static const struct qcom_cpufreq_match_d +@@ -274,6 +317,10 @@ static const struct qcom_cpufreq_match_d .get_version = qcom_cpufreq_ipq6018_name_version, }; @@ -103,7 +103,7 @@ Signed-off-by: Viresh Kumar static int qcom_cpufreq_probe(struct platform_device *pdev) { struct qcom_cpufreq_drv *drv; -@@ -421,6 +468,7 @@ static const struct of_device_id qcom_cp +@@ -418,6 +465,7 @@ static const struct of_device_id qcom_cp { .compatible = "qcom,qcs404", .data = &match_data_qcs404 }, { .compatible = "qcom,ipq6018", .data = &match_data_ipq6018 }, { .compatible = "qcom,ipq8064", .data = &match_data_krait }, diff --git a/target/linux/qualcommax/patches-6.6/0028-v6.7-arm64-dts-qcom-ipq8074-include-the-GPLL0-as-clock-pr.patch b/target/linux/qualcommax/patches-6.6/0028-v6.7-arm64-dts-qcom-ipq8074-include-the-GPLL0-as-clock-pr.patch index fb7011de95de..7607bdad8bba 100644 --- a/target/linux/qualcommax/patches-6.6/0028-v6.7-arm64-dts-qcom-ipq8074-include-the-GPLL0-as-clock-pr.patch +++ b/target/linux/qualcommax/patches-6.6/0028-v6.7-arm64-dts-qcom-ipq8074-include-the-GPLL0-as-clock-pr.patch @@ -19,7 +19,7 @@ Reviewed-by: Konrad Dybcio --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -685,8 +685,8 @@ +@@ -721,8 +721,8 @@ compatible = "qcom,ipq8074-apcs-apps-global", "qcom,ipq6018-apcs-apps-global"; reg = <0x0b111000 0x1000>; diff --git a/target/linux/qualcommax/patches-6.6/0029-v6.3-dt-bindings-arm-qcom-ids-Add-IDs-for-IPQ5332-and-its.patch b/target/linux/qualcommax/patches-6.6/0029-v6.3-dt-bindings-arm-qcom-ids-Add-IDs-for-IPQ5332-and-its.patch deleted file mode 100644 index 61bb3f6c3748..000000000000 --- a/target/linux/qualcommax/patches-6.6/0029-v6.3-dt-bindings-arm-qcom-ids-Add-IDs-for-IPQ5332-and-its.patch +++ /dev/null @@ -1,27 +0,0 @@ -From c0877a26b7ee54ef30d16ffdcdd37f2bcffe518e Mon Sep 17 00:00:00 2001 -From: Kathiravan T -Date: Wed, 8 Feb 2023 11:27:08 +0530 -Subject: [PATCH] dt-bindings: arm: qcom,ids: Add IDs for IPQ5332 and its - variant - -Add SOC ID for Qualcomm IPQ5332 and IPQ5322 variants. - -Signed-off-by: Kathiravan T -Acked-by: Krzysztof Kozlowski -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20230208055709.13162-2-quic_kathirav@quicinc.com ---- - include/dt-bindings/arm/qcom,ids.h | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/include/dt-bindings/arm/qcom,ids.h -+++ b/include/dt-bindings/arm/qcom,ids.h -@@ -143,6 +143,8 @@ - #define QCOM_ID_SC7280 487 - #define QCOM_ID_SC7180P 495 - #define QCOM_ID_SM6375 507 -+#define QCOM_ID_IPQ5332 592 -+#define QCOM_ID_IPQ5322 593 - - /* - * The board type and revision information, used by Qualcomm bootloaders and diff --git a/target/linux/qualcommax/patches-6.6/0030-v6.4-dt-bindings-arm-qcom-ids-Add-IDs-for-IPQ9574-and-its.patch b/target/linux/qualcommax/patches-6.6/0030-v6.4-dt-bindings-arm-qcom-ids-Add-IDs-for-IPQ9574-and-its.patch deleted file mode 100644 index 7d80e4c1fdd5..000000000000 --- a/target/linux/qualcommax/patches-6.6/0030-v6.4-dt-bindings-arm-qcom-ids-Add-IDs-for-IPQ9574-and-its.patch +++ /dev/null @@ -1,33 +0,0 @@ -From 725352e15e1d030885611a546eb1f2884851a407 Mon Sep 17 00:00:00 2001 -From: Varadarajan Narayanan -Date: Tue, 14 Mar 2023 11:43:33 +0530 -Subject: [PATCH] dt-bindings: arm: qcom,ids: Add IDs for IPQ9574 and its - variants - -Add SOC ID for Qualcomm IPQ9574, IPQ9570, IPQ9554, IPQ9550, -IPQ9514 and IPQ9510 - -Signed-off-by: Varadarajan Narayanan -Acked-by: Krzysztof Kozlowski -Reviewed-by: Kathiravan T -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/1678774414-14414-2-git-send-email-quic_varada@quicinc.com ---- - include/dt-bindings/arm/qcom,ids.h | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/include/dt-bindings/arm/qcom,ids.h -+++ b/include/dt-bindings/arm/qcom,ids.h -@@ -143,6 +143,12 @@ - #define QCOM_ID_SC7280 487 - #define QCOM_ID_SC7180P 495 - #define QCOM_ID_SM6375 507 -+#define QCOM_ID_IPQ9514 510 -+#define QCOM_ID_IPQ9550 511 -+#define QCOM_ID_IPQ9554 512 -+#define QCOM_ID_IPQ9570 513 -+#define QCOM_ID_IPQ9574 514 -+#define QCOM_ID_IPQ9510 521 - #define QCOM_ID_IPQ5332 592 - #define QCOM_ID_IPQ5322 593 - diff --git a/target/linux/qualcommax/patches-6.6/0031-v6.5-dt-bindings-arm-qcom-ids-add-SoC-ID-for-IPQ5312-and-.patch b/target/linux/qualcommax/patches-6.6/0031-v6.5-dt-bindings-arm-qcom-ids-add-SoC-ID-for-IPQ5312-and-.patch deleted file mode 100644 index ad70e7b6c9e4..000000000000 --- a/target/linux/qualcommax/patches-6.6/0031-v6.5-dt-bindings-arm-qcom-ids-add-SoC-ID-for-IPQ5312-and-.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 614c778cf0d570642c50715adfa0b70930d8cf29 Mon Sep 17 00:00:00 2001 -From: Kathiravan T -Date: Tue, 9 May 2023 09:05:30 +0530 -Subject: [PATCH] dt-bindings: arm: qcom,ids: add SoC ID for IPQ5312 and - IPQ5302 - -Add the SoC ID for IPQ5312 and IPQ5302, which belong to the family of -IPQ5332 SoC. - -Reviewed-by: Krzysztof Kozlowski -Signed-off-by: Kathiravan T -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20230509033531.21468-2-quic_kathirav@quicinc.com ---- - include/dt-bindings/arm/qcom,ids.h | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/include/dt-bindings/arm/qcom,ids.h -+++ b/include/dt-bindings/arm/qcom,ids.h -@@ -151,6 +151,8 @@ - #define QCOM_ID_IPQ9510 521 - #define QCOM_ID_IPQ5332 592 - #define QCOM_ID_IPQ5322 593 -+#define QCOM_ID_IPQ5312 594 -+#define QCOM_ID_IPQ5302 595 - - /* - * The board type and revision information, used by Qualcomm bootloaders and diff --git a/target/linux/qualcommax/patches-6.6/0032-v6.5-dt-bindings-arm-qcom-ids-add-SoC-ID-for-IPQ5300.patch b/target/linux/qualcommax/patches-6.6/0032-v6.5-dt-bindings-arm-qcom-ids-add-SoC-ID-for-IPQ5300.patch deleted file mode 100644 index 7925a0994d80..000000000000 --- a/target/linux/qualcommax/patches-6.6/0032-v6.5-dt-bindings-arm-qcom-ids-add-SoC-ID-for-IPQ5300.patch +++ /dev/null @@ -1,25 +0,0 @@ -From b3c72f2795467e3d43ee429b0ebd5f523ec08f60 Mon Sep 17 00:00:00 2001 -From: Kathiravan T -Date: Mon, 5 Jun 2023 13:35:28 +0530 -Subject: [PATCH] dt-bindings: arm: qcom,ids: add SoC ID for IPQ5300 - -Add the SoC ID for IPQ5300, which belong to the family of IPQ5332 SoC. - -Acked-by: Krzysztof Kozlowski -Signed-off-by: Kathiravan T -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20230605080531.3879-2-quic_kathirav@quicinc.com ---- - include/dt-bindings/arm/qcom,ids.h | 1 + - 1 file changed, 1 insertion(+) - ---- a/include/dt-bindings/arm/qcom,ids.h -+++ b/include/dt-bindings/arm/qcom,ids.h -@@ -153,6 +153,7 @@ - #define QCOM_ID_IPQ5322 593 - #define QCOM_ID_IPQ5312 594 - #define QCOM_ID_IPQ5302 595 -+#define QCOM_ID_IPQ5300 624 - - /* - * The board type and revision information, used by Qualcomm bootloaders and diff --git a/target/linux/qualcommax/patches-6.6/0033-v6.2-arm64-dts-qcom-ipq6018-move-ARMv8-timer-out-of-SoC.patch b/target/linux/qualcommax/patches-6.6/0033-v6.2-arm64-dts-qcom-ipq6018-move-ARMv8-timer-out-of-SoC.patch deleted file mode 100644 index c3e94a2ae008..000000000000 --- a/target/linux/qualcommax/patches-6.6/0033-v6.2-arm64-dts-qcom-ipq6018-move-ARMv8-timer-out-of-SoC.patch +++ /dev/null @@ -1,52 +0,0 @@ -From feeef118fda562cf9081edef8ad464d89db070f4 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Tue, 27 Sep 2022 22:12:18 +0200 -Subject: [PATCH] arm64: dts: qcom: ipq6018: move ARMv8 timer out of SoC node - -The ARM timer is usually considered not part of SoC node, just like -other ARM designed blocks (PMU, PSCI). This fixes dtbs_check warning: - -arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dtb: soc: timer: {'compatible': ['arm,armv8-timer'], 'interrupts': [[1, 2, 3848], [1, 3, 3848], [1, 4, 3848], [1, 1, 3848]]} should not be valid under {'type': 'object'} - From schema: dtschema/schemas/simple-bus.yaml - -Signed-off-by: Robert Marko -Reviewed-by: Krzysztof Kozlowski -Reviewed-by: Neil Armstrong -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20220927201218.1264506-2-robimarko@gmail.com ---- - arch/arm64/boot/dts/qcom/ipq6018.dtsi | 16 ++++++++-------- - 1 file changed, 8 insertions(+), 8 deletions(-) - ---- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -510,14 +510,6 @@ - clock-names = "xo"; - }; - -- timer { -- compatible = "arm,armv8-timer"; -- interrupts = , -- , -- , -- ; -- }; -- - timer@b120000 { - #address-cells = <1>; - #size-cells = <1>; -@@ -769,6 +761,14 @@ - }; - }; - -+ timer { -+ compatible = "arm,armv8-timer"; -+ interrupts = , -+ , -+ , -+ ; -+ }; -+ - wcss: wcss-smp2p { - compatible = "qcom,smp2p"; - qcom,smem = <435>, <428>; diff --git a/target/linux/qualcommax/patches-6.6/0034-v6.3-arm64-dts-qcom-ipq6018-Sort-nodes-properly.patch b/target/linux/qualcommax/patches-6.6/0034-v6.3-arm64-dts-qcom-ipq6018-Sort-nodes-properly.patch deleted file mode 100644 index ad32e64fe1b5..000000000000 --- a/target/linux/qualcommax/patches-6.6/0034-v6.3-arm64-dts-qcom-ipq6018-Sort-nodes-properly.patch +++ /dev/null @@ -1,605 +0,0 @@ -From 2c6e322a41c5e1ca45be50b9d5fbcda62dc23a0d Mon Sep 17 00:00:00 2001 -From: Konrad Dybcio -Date: Mon, 2 Jan 2023 10:46:28 +0100 -Subject: [PATCH] arm64: dts: qcom: ipq6018: Sort nodes properly - -Order nodes by unit address if one exists and alphabetically otherwise. - -Signed-off-by: Konrad Dybcio -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20230102094642.74254-4-konrad.dybcio@linaro.org ---- - arch/arm64/boot/dts/qcom/ipq6018.dtsi | 562 +++++++++++++------------- - 1 file changed, 281 insertions(+), 281 deletions(-) - ---- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -87,6 +87,12 @@ - }; - }; - -+ firmware { -+ scm { -+ compatible = "qcom,scm-ipq6018", "qcom,scm"; -+ }; -+ }; -+ - cpu_opp_table: opp-table-cpu { - compatible = "operating-points-v2"; - opp-shared; -@@ -123,12 +129,6 @@ - }; - }; - -- firmware { -- scm { -- compatible = "qcom,scm-ipq6018", "qcom,scm"; -- }; -- }; -- - pmuv8: pmu { - compatible = "arm,cortex-a53-pmu"; - interrupts = ; -+ qcom,rpm-msg-ram = <&rpm_msg_ram>; -+ mboxes = <&apcs_glb 0>; -+ -+ rpm_requests: glink-channel { -+ compatible = "qcom,rpm-ipq6018"; -+ qcom,glink-channels = "rpm_requests"; -+ -+ regulators { -+ compatible = "qcom,rpm-mp5496-regulators"; -+ -+ ipq6018_s2: s2 { -+ regulator-min-microvolt = <725000>; -+ regulator-max-microvolt = <1062500>; -+ regulator-always-on; -+ }; -+ }; -+ }; -+ }; -+ - smem { - compatible = "qcom,smem"; - memory-region = <&smem_region>; -@@ -179,6 +201,102 @@ - dma-ranges; - compatible = "simple-bus"; - -+ qusb_phy_1: qusb@59000 { -+ compatible = "qcom,ipq6018-qusb2-phy"; -+ reg = <0x0 0x00059000 0x0 0x180>; -+ #phy-cells = <0>; -+ -+ clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, -+ <&xo>; -+ clock-names = "cfg_ahb", "ref"; -+ -+ resets = <&gcc GCC_QUSB2_1_PHY_BCR>; -+ status = "disabled"; -+ }; -+ -+ ssphy_0: ssphy@78000 { -+ compatible = "qcom,ipq6018-qmp-usb3-phy"; -+ reg = <0x0 0x00078000 0x0 0x1c4>; -+ #address-cells = <2>; -+ #size-cells = <2>; -+ ranges; -+ -+ clocks = <&gcc GCC_USB0_AUX_CLK>, -+ <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>; -+ clock-names = "aux", "cfg_ahb", "ref"; -+ -+ resets = <&gcc GCC_USB0_PHY_BCR>, -+ <&gcc GCC_USB3PHY_0_PHY_BCR>; -+ reset-names = "phy","common"; -+ status = "disabled"; -+ -+ usb0_ssphy: phy@78200 { -+ reg = <0x0 0x00078200 0x0 0x130>, /* Tx */ -+ <0x0 0x00078400 0x0 0x200>, /* Rx */ -+ <0x0 0x00078800 0x0 0x1f8>, /* PCS */ -+ <0x0 0x00078600 0x0 0x044>; /* PCS misc */ -+ #phy-cells = <0>; -+ #clock-cells = <0>; -+ clocks = <&gcc GCC_USB0_PIPE_CLK>; -+ clock-names = "pipe0"; -+ clock-output-names = "gcc_usb0_pipe_clk_src"; -+ }; -+ }; -+ -+ qusb_phy_0: qusb@79000 { -+ compatible = "qcom,ipq6018-qusb2-phy"; -+ reg = <0x0 0x00079000 0x0 0x180>; -+ #phy-cells = <0>; -+ -+ clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, -+ <&xo>; -+ clock-names = "cfg_ahb", "ref"; -+ -+ resets = <&gcc GCC_QUSB2_0_PHY_BCR>; -+ status = "disabled"; -+ }; -+ -+ pcie_phy: phy@84000 { -+ compatible = "qcom,ipq6018-qmp-pcie-phy"; -+ reg = <0x0 0x00084000 0x0 0x1bc>; /* Serdes PLL */ -+ status = "disabled"; -+ #address-cells = <2>; -+ #size-cells = <2>; -+ ranges; -+ -+ clocks = <&gcc GCC_PCIE0_AUX_CLK>, -+ <&gcc GCC_PCIE0_AHB_CLK>; -+ clock-names = "aux", "cfg_ahb"; -+ -+ resets = <&gcc GCC_PCIE0_PHY_BCR>, -+ <&gcc GCC_PCIE0PHY_PHY_BCR>; -+ reset-names = "phy", -+ "common"; -+ -+ pcie_phy0: phy@84200 { -+ reg = <0x0 0x00084200 0x0 0x16c>, /* Serdes Tx */ -+ <0x0 0x00084400 0x0 0x200>, /* Serdes Rx */ -+ <0x0 0x00084800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */ -+ <0x0 0x00084c00 0x0 0xf4>; /* pcs_misc */ -+ #phy-cells = <0>; -+ -+ clocks = <&gcc GCC_PCIE0_PIPE_CLK>; -+ clock-names = "pipe0"; -+ clock-output-names = "gcc_pcie0_pipe_clk_src"; -+ #clock-cells = <0>; -+ }; -+ }; -+ -+ mdio: mdio@90000 { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ compatible = "qcom,ipq6018-mdio", "qcom,ipq4019-mdio"; -+ reg = <0x0 0x00090000 0x0 0x64>; -+ clocks = <&gcc GCC_MDIO_AHB_CLK>; -+ clock-names = "gcc_mdio_ahb_clk"; -+ status = "disabled"; -+ }; -+ - prng: qrng@e1000 { - compatible = "qcom,prng-ee"; - reg = <0x0 0x000e3000 0x0 0x1000>; -@@ -257,6 +375,41 @@ - reg = <0x0 0x01937000 0x0 0x21000>; - }; - -+ usb2: usb@70f8800 { -+ compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; -+ reg = <0x0 0x070F8800 0x0 0x400>; -+ #address-cells = <2>; -+ #size-cells = <2>; -+ ranges; -+ clocks = <&gcc GCC_USB1_MASTER_CLK>, -+ <&gcc GCC_USB1_SLEEP_CLK>, -+ <&gcc GCC_USB1_MOCK_UTMI_CLK>; -+ clock-names = "core", -+ "sleep", -+ "mock_utmi"; -+ -+ assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>, -+ <&gcc GCC_USB1_MOCK_UTMI_CLK>; -+ assigned-clock-rates = <133330000>, -+ <24000000>; -+ resets = <&gcc GCC_USB1_BCR>; -+ status = "disabled"; -+ -+ dwc_1: usb@7000000 { -+ compatible = "snps,dwc3"; -+ reg = <0x0 0x07000000 0x0 0xcd00>; -+ interrupts = ; -+ phys = <&qusb_phy_1>; -+ phy-names = "usb2-phy"; -+ tx-fifo-resize; -+ snps,is-utmi-l1-suspend; -+ snps,hird-threshold = /bits/ 8 <0x0>; -+ snps,dis_u2_susphy_quirk; -+ snps,dis_u3_susphy_quirk; -+ dr_mode = "host"; -+ }; -+ }; -+ - blsp_dma: dma-controller@7884000 { - compatible = "qcom,bam-v1.7.0"; - reg = <0x0 0x07884000 0x0 0x2b000>; -@@ -366,6 +519,49 @@ - status = "disabled"; - }; - -+ usb3: usb@8af8800 { -+ compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; -+ reg = <0x0 0x08af8800 0x0 0x400>; -+ #address-cells = <2>; -+ #size-cells = <2>; -+ ranges; -+ -+ clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, -+ <&gcc GCC_USB0_MASTER_CLK>, -+ <&gcc GCC_USB0_SLEEP_CLK>, -+ <&gcc GCC_USB0_MOCK_UTMI_CLK>; -+ clock-names = "cfg_noc", -+ "core", -+ "sleep", -+ "mock_utmi"; -+ -+ assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, -+ <&gcc GCC_USB0_MASTER_CLK>, -+ <&gcc GCC_USB0_MOCK_UTMI_CLK>; -+ assigned-clock-rates = <133330000>, -+ <133330000>, -+ <24000000>; -+ -+ resets = <&gcc GCC_USB0_BCR>; -+ status = "disabled"; -+ -+ dwc_0: usb@8a00000 { -+ compatible = "snps,dwc3"; -+ reg = <0x0 0x08a00000 0x0 0xcd00>; -+ interrupts = ; -+ phys = <&qusb_phy_0>, <&usb0_ssphy>; -+ phy-names = "usb2-phy", "usb3-phy"; -+ clocks = <&xo>; -+ clock-names = "ref"; -+ tx-fifo-resize; -+ snps,is-utmi-l1-suspend; -+ snps,hird-threshold = /bits/ 8 <0x0>; -+ snps,dis_u2_susphy_quirk; -+ snps,dis_u3_susphy_quirk; -+ dr_mode = "host"; -+ }; -+ }; -+ - intc: interrupt-controller@b000000 { - compatible = "qcom,msm-qgic2"; - #address-cells = <2>; -@@ -386,105 +582,6 @@ - }; - }; - -- pcie_phy: phy@84000 { -- compatible = "qcom,ipq6018-qmp-pcie-phy"; -- reg = <0x0 0x00084000 0x0 0x1bc>; /* Serdes PLL */ -- status = "disabled"; -- #address-cells = <2>; -- #size-cells = <2>; -- ranges; -- -- clocks = <&gcc GCC_PCIE0_AUX_CLK>, -- <&gcc GCC_PCIE0_AHB_CLK>; -- clock-names = "aux", "cfg_ahb"; -- -- resets = <&gcc GCC_PCIE0_PHY_BCR>, -- <&gcc GCC_PCIE0PHY_PHY_BCR>; -- reset-names = "phy", -- "common"; -- -- pcie_phy0: phy@84200 { -- reg = <0x0 0x00084200 0x0 0x16c>, /* Serdes Tx */ -- <0x0 0x00084400 0x0 0x200>, /* Serdes Rx */ -- <0x0 0x00084800 0x0 0x1f0>, /* PCS: Lane0, COM, PCIE */ -- <0x0 0x00084c00 0x0 0xf4>; /* pcs_misc */ -- #phy-cells = <0>; -- -- clocks = <&gcc GCC_PCIE0_PIPE_CLK>; -- clock-names = "pipe0"; -- clock-output-names = "gcc_pcie0_pipe_clk_src"; -- #clock-cells = <0>; -- }; -- }; -- -- pcie0: pci@20000000 { -- compatible = "qcom,pcie-ipq6018"; -- reg = <0x0 0x20000000 0x0 0xf1d>, -- <0x0 0x20000f20 0x0 0xa8>, -- <0x0 0x20001000 0x0 0x1000>, -- <0x0 0x80000 0x0 0x4000>, -- <0x0 0x20100000 0x0 0x1000>; -- reg-names = "dbi", "elbi", "atu", "parf", "config"; -- -- device_type = "pci"; -- linux,pci-domain = <0>; -- bus-range = <0x00 0xff>; -- num-lanes = <1>; -- max-link-speed = <3>; -- #address-cells = <3>; -- #size-cells = <2>; -- -- phys = <&pcie_phy0>; -- phy-names = "pciephy"; -- -- ranges = <0x81000000 0x0 0x00000000 0x0 0x20200000 0x0 0x10000>, -- <0x82000000 0x0 0x20220000 0x0 0x20220000 0x0 0xfde0000>; -- -- interrupts = ; -- interrupt-names = "msi"; -- -- #interrupt-cells = <1>; -- interrupt-map-mask = <0 0 0 0x7>; -- interrupt-map = <0 0 0 1 &intc 0 75 -- IRQ_TYPE_LEVEL_HIGH>, /* int_a */ -- <0 0 0 2 &intc 0 78 -- IRQ_TYPE_LEVEL_HIGH>, /* int_b */ -- <0 0 0 3 &intc 0 79 -- IRQ_TYPE_LEVEL_HIGH>, /* int_c */ -- <0 0 0 4 &intc 0 83 -- IRQ_TYPE_LEVEL_HIGH>; /* int_d */ -- -- clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, -- <&gcc GCC_PCIE0_AXI_M_CLK>, -- <&gcc GCC_PCIE0_AXI_S_CLK>, -- <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>, -- <&gcc PCIE0_RCHNG_CLK>; -- clock-names = "iface", -- "axi_m", -- "axi_s", -- "axi_bridge", -- "rchng"; -- -- resets = <&gcc GCC_PCIE0_PIPE_ARES>, -- <&gcc GCC_PCIE0_SLEEP_ARES>, -- <&gcc GCC_PCIE0_CORE_STICKY_ARES>, -- <&gcc GCC_PCIE0_AXI_MASTER_ARES>, -- <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, -- <&gcc GCC_PCIE0_AHB_ARES>, -- <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>, -- <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>; -- reset-names = "pipe", -- "sleep", -- "sticky", -- "axi_m", -- "axi_s", -- "ahb", -- "axi_m_sticky", -- "axi_s_sticky"; -- -- status = "disabled"; -- }; -- - watchdog@b017000 { - compatible = "qcom,kpss-wdt"; - interrupts = ; -@@ -617,147 +714,74 @@ - }; - }; - -- mdio: mdio@90000 { -- #address-cells = <1>; -- #size-cells = <0>; -- compatible = "qcom,ipq6018-mdio", "qcom,ipq4019-mdio"; -- reg = <0x0 0x00090000 0x0 0x64>; -- clocks = <&gcc GCC_MDIO_AHB_CLK>; -- clock-names = "gcc_mdio_ahb_clk"; -- status = "disabled"; -- }; -- -- qusb_phy_1: qusb@59000 { -- compatible = "qcom,ipq6018-qusb2-phy"; -- reg = <0x0 0x00059000 0x0 0x180>; -- #phy-cells = <0>; -- -- clocks = <&gcc GCC_USB1_PHY_CFG_AHB_CLK>, -- <&xo>; -- clock-names = "cfg_ahb", "ref"; -- -- resets = <&gcc GCC_QUSB2_1_PHY_BCR>; -- status = "disabled"; -- }; -- -- usb2: usb@70f8800 { -- compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; -- reg = <0x0 0x070F8800 0x0 0x400>; -- #address-cells = <2>; -- #size-cells = <2>; -- ranges; -- clocks = <&gcc GCC_USB1_MASTER_CLK>, -- <&gcc GCC_USB1_SLEEP_CLK>, -- <&gcc GCC_USB1_MOCK_UTMI_CLK>; -- clock-names = "core", -- "sleep", -- "mock_utmi"; -- -- assigned-clocks = <&gcc GCC_USB1_MASTER_CLK>, -- <&gcc GCC_USB1_MOCK_UTMI_CLK>; -- assigned-clock-rates = <133330000>, -- <24000000>; -- resets = <&gcc GCC_USB1_BCR>; -- status = "disabled"; -- -- dwc_1: usb@7000000 { -- compatible = "snps,dwc3"; -- reg = <0x0 0x07000000 0x0 0xcd00>; -- interrupts = ; -- phys = <&qusb_phy_1>; -- phy-names = "usb2-phy"; -- tx-fifo-resize; -- snps,is-utmi-l1-suspend; -- snps,hird-threshold = /bits/ 8 <0x0>; -- snps,dis_u2_susphy_quirk; -- snps,dis_u3_susphy_quirk; -- dr_mode = "host"; -- }; -- }; -+ pcie0: pci@20000000 { -+ compatible = "qcom,pcie-ipq6018"; -+ reg = <0x0 0x20000000 0x0 0xf1d>, -+ <0x0 0x20000f20 0x0 0xa8>, -+ <0x0 0x20001000 0x0 0x1000>, -+ <0x0 0x80000 0x0 0x4000>, -+ <0x0 0x20100000 0x0 0x1000>; -+ reg-names = "dbi", "elbi", "atu", "parf", "config"; - -- ssphy_0: ssphy@78000 { -- compatible = "qcom,ipq6018-qmp-usb3-phy"; -- reg = <0x0 0x00078000 0x0 0x1c4>; -- #address-cells = <2>; -+ device_type = "pci"; -+ linux,pci-domain = <0>; -+ bus-range = <0x00 0xff>; -+ num-lanes = <1>; -+ max-link-speed = <3>; -+ #address-cells = <3>; - #size-cells = <2>; -- ranges; -- -- clocks = <&gcc GCC_USB0_AUX_CLK>, -- <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, <&xo>; -- clock-names = "aux", "cfg_ahb", "ref"; -- -- resets = <&gcc GCC_USB0_PHY_BCR>, -- <&gcc GCC_USB3PHY_0_PHY_BCR>; -- reset-names = "phy","common"; -- status = "disabled"; -- -- usb0_ssphy: phy@78200 { -- reg = <0x0 0x00078200 0x0 0x130>, /* Tx */ -- <0x0 0x00078400 0x0 0x200>, /* Rx */ -- <0x0 0x00078800 0x0 0x1f8>, /* PCS */ -- <0x0 0x00078600 0x0 0x044>; /* PCS misc */ -- #phy-cells = <0>; -- #clock-cells = <0>; -- clocks = <&gcc GCC_USB0_PIPE_CLK>; -- clock-names = "pipe0"; -- clock-output-names = "gcc_usb0_pipe_clk_src"; -- }; -- }; - -- qusb_phy_0: qusb@79000 { -- compatible = "qcom,ipq6018-qusb2-phy"; -- reg = <0x0 0x00079000 0x0 0x180>; -- #phy-cells = <0>; -+ phys = <&pcie_phy0>; -+ phy-names = "pciephy"; - -- clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>, -- <&xo>; -- clock-names = "cfg_ahb", "ref"; -+ ranges = <0x81000000 0 0x20200000 0 0x20200000 -+ 0 0x10000>, /* downstream I/O */ -+ <0x82000000 0 0x20220000 0 0x20220000 -+ 0 0xfde0000>; /* non-prefetchable memory */ - -- resets = <&gcc GCC_QUSB2_0_PHY_BCR>; -- status = "disabled"; -- }; -+ interrupts = ; -+ interrupt-names = "msi"; - -- usb3: usb@8af8800 { -- compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; -- reg = <0x0 0x8af8800 0x0 0x400>; -- #address-cells = <2>; -- #size-cells = <2>; -- ranges; -+ #interrupt-cells = <1>; -+ interrupt-map-mask = <0 0 0 0x7>; -+ interrupt-map = <0 0 0 1 &intc 0 75 -+ IRQ_TYPE_LEVEL_HIGH>, /* int_a */ -+ <0 0 0 2 &intc 0 78 -+ IRQ_TYPE_LEVEL_HIGH>, /* int_b */ -+ <0 0 0 3 &intc 0 79 -+ IRQ_TYPE_LEVEL_HIGH>, /* int_c */ -+ <0 0 0 4 &intc 0 83 -+ IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - -- clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, -- <&gcc GCC_USB0_MASTER_CLK>, -- <&gcc GCC_USB0_SLEEP_CLK>, -- <&gcc GCC_USB0_MOCK_UTMI_CLK>; -- clock-names = "cfg_noc", -- "core", -- "sleep", -- "mock_utmi"; -+ clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, -+ <&gcc GCC_PCIE0_AXI_M_CLK>, -+ <&gcc GCC_PCIE0_AXI_S_CLK>, -+ <&gcc GCC_PCIE0_AXI_S_BRIDGE_CLK>, -+ <&gcc PCIE0_RCHNG_CLK>; -+ clock-names = "iface", -+ "axi_m", -+ "axi_s", -+ "axi_bridge", -+ "rchng"; - -- assigned-clocks = <&gcc GCC_SYS_NOC_USB0_AXI_CLK>, -- <&gcc GCC_USB0_MASTER_CLK>, -- <&gcc GCC_USB0_MOCK_UTMI_CLK>; -- assigned-clock-rates = <133330000>, -- <133330000>, -- <24000000>; -+ resets = <&gcc GCC_PCIE0_PIPE_ARES>, -+ <&gcc GCC_PCIE0_SLEEP_ARES>, -+ <&gcc GCC_PCIE0_CORE_STICKY_ARES>, -+ <&gcc GCC_PCIE0_AXI_MASTER_ARES>, -+ <&gcc GCC_PCIE0_AXI_SLAVE_ARES>, -+ <&gcc GCC_PCIE0_AHB_ARES>, -+ <&gcc GCC_PCIE0_AXI_MASTER_STICKY_ARES>, -+ <&gcc GCC_PCIE0_AXI_SLAVE_STICKY_ARES>; -+ reset-names = "pipe", -+ "sleep", -+ "sticky", -+ "axi_m", -+ "axi_s", -+ "ahb", -+ "axi_m_sticky", -+ "axi_s_sticky"; - -- resets = <&gcc GCC_USB0_BCR>; - status = "disabled"; -- -- dwc_0: usb@8a00000 { -- compatible = "snps,dwc3"; -- reg = <0x0 0x8a00000 0x0 0xcd00>; -- interrupts = ; -- phys = <&qusb_phy_0>, <&usb0_ssphy>; -- phy-names = "usb2-phy", "usb3-phy"; -- clocks = <&xo>; -- clock-names = "ref"; -- tx-fifo-resize; -- snps,is-utmi-l1-suspend; -- snps,hird-threshold = /bits/ 8 <0x0>; -- snps,dis_u2_susphy_quirk; -- snps,dis_u3_susphy_quirk; -- dr_mode = "host"; -- }; - }; - }; - -@@ -792,26 +816,4 @@ - #interrupt-cells = <2>; - }; - }; -- -- rpm-glink { -- compatible = "qcom,glink-rpm"; -- interrupts = ; -- qcom,rpm-msg-ram = <&rpm_msg_ram>; -- mboxes = <&apcs_glb 0>; -- -- rpm_requests: glink-channel { -- compatible = "qcom,rpm-ipq6018"; -- qcom,glink-channels = "rpm_requests"; -- -- regulators { -- compatible = "qcom,rpm-mp5496-regulators"; -- -- ipq6018_s2: s2 { -- regulator-min-microvolt = <725000>; -- regulator-max-microvolt = <1062500>; -- regulator-always-on; -- }; -- }; -- }; -- }; - }; diff --git a/target/linux/qualcommax/patches-6.6/0035-v6.3-arm64-dts-qcom-ipq6018-Add-remove-some-newlines.patch b/target/linux/qualcommax/patches-6.6/0035-v6.3-arm64-dts-qcom-ipq6018-Add-remove-some-newlines.patch deleted file mode 100644 index a883e305dfd8..000000000000 --- a/target/linux/qualcommax/patches-6.6/0035-v6.3-arm64-dts-qcom-ipq6018-Add-remove-some-newlines.patch +++ /dev/null @@ -1,92 +0,0 @@ -From 6db9ed9a128cbae1423d043f3debd8bfa77783fd Mon Sep 17 00:00:00 2001 -From: Konrad Dybcio -Date: Mon, 2 Jan 2023 10:46:29 +0100 -Subject: [PATCH] arm64: dts: qcom: ipq6018: Add/remove some newlines - -Some lines were broken very aggresively, presumably to fit under 80 chars -and some places could have used a newline, particularly between subsequent -nodes. Address all that and remove redundant comments near PCIe ranges -while at it so as not to exceed 100 chars needlessly. - -Signed-off-by: Konrad Dybcio -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20230102094642.74254-5-konrad.dybcio@linaro.org ---- - arch/arm64/boot/dts/qcom/ipq6018.dtsi | 26 ++++++++++++-------------- - 1 file changed, 12 insertions(+), 14 deletions(-) - ---- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -102,26 +102,31 @@ - opp-microvolt = <725000>; - clock-latency-ns = <200000>; - }; -+ - opp-1056000000 { - opp-hz = /bits/ 64 <1056000000>; - opp-microvolt = <787500>; - clock-latency-ns = <200000>; - }; -+ - opp-1320000000 { - opp-hz = /bits/ 64 <1320000000>; - opp-microvolt = <862500>; - clock-latency-ns = <200000>; - }; -+ - opp-1440000000 { - opp-hz = /bits/ 64 <1440000000>; - opp-microvolt = <925000>; - clock-latency-ns = <200000>; - }; -+ - opp-1608000000 { - opp-hz = /bits/ 64 <1608000000>; - opp-microvolt = <987500>; - clock-latency-ns = <200000>; - }; -+ - opp-1800000000 { - opp-hz = /bits/ 64 <1800000000>; - opp-microvolt = <1062500>; -@@ -131,8 +136,7 @@ - - pmuv8: pmu { - compatible = "arm,cortex-a53-pmu"; -- interrupts = ; -+ interrupts = ; - }; - - psci: psci { -@@ -734,24 +738,18 @@ - phys = <&pcie_phy0>; - phy-names = "pciephy"; - -- ranges = <0x81000000 0 0x20200000 0 0x20200000 -- 0 0x10000>, /* downstream I/O */ -- <0x82000000 0 0x20220000 0 0x20220000 -- 0 0xfde0000>; /* non-prefetchable memory */ -+ ranges = <0x81000000 0 0x20200000 0 0x20200000 0 0x10000>, -+ <0x82000000 0 0x20220000 0 0x20220000 0 0xfde0000>; - - interrupts = ; - interrupt-names = "msi"; - - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 0x7>; -- interrupt-map = <0 0 0 1 &intc 0 75 -- IRQ_TYPE_LEVEL_HIGH>, /* int_a */ -- <0 0 0 2 &intc 0 78 -- IRQ_TYPE_LEVEL_HIGH>, /* int_b */ -- <0 0 0 3 &intc 0 79 -- IRQ_TYPE_LEVEL_HIGH>, /* int_c */ -- <0 0 0 4 &intc 0 83 -- IRQ_TYPE_LEVEL_HIGH>; /* int_d */ -+ interrupt-map = <0 0 0 1 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */ -+ <0 0 0 2 &intc 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */ -+ <0 0 0 3 &intc 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */ -+ <0 0 0 4 &intc 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */ - - clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>, - <&gcc GCC_PCIE0_AXI_M_CLK>, diff --git a/target/linux/qualcommax/patches-6.6/0036-v6.3-arm64-dts-qcom-ipq6018-Use-lowercase-hex.patch b/target/linux/qualcommax/patches-6.6/0036-v6.3-arm64-dts-qcom-ipq6018-Use-lowercase-hex.patch deleted file mode 100644 index 35aa46bb10ae..000000000000 --- a/target/linux/qualcommax/patches-6.6/0036-v6.3-arm64-dts-qcom-ipq6018-Use-lowercase-hex.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 7356ae3e10abd1d71f06ff0b8a8e72aa7c955c57 Mon Sep 17 00:00:00 2001 -From: Konrad Dybcio -Date: Mon, 2 Jan 2023 10:46:30 +0100 -Subject: [PATCH] arm64: dts: qcom: ipq6018: Use lowercase hex - -One value escaped my previous lowercase hexification. Take care of it. - -Signed-off-by: Konrad Dybcio -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20230102094642.74254-6-konrad.dybcio@linaro.org ---- - arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -381,7 +381,7 @@ - - usb2: usb@70f8800 { - compatible = "qcom,ipq6018-dwc3", "qcom,dwc3"; -- reg = <0x0 0x070F8800 0x0 0x400>; -+ reg = <0x0 0x070f8800 0x0 0x400>; - #address-cells = <2>; - #size-cells = <2>; - ranges; diff --git a/target/linux/qualcommax/patches-6.6/0037-v6.3-arm64-dts-qcom-ipq6018-align-RPM-G-Link-node-with.patch b/target/linux/qualcommax/patches-6.6/0037-v6.3-arm64-dts-qcom-ipq6018-align-RPM-G-Link-node-with.patch deleted file mode 100644 index c939d126bf70..000000000000 --- a/target/linux/qualcommax/patches-6.6/0037-v6.3-arm64-dts-qcom-ipq6018-align-RPM-G-Link-node-with.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 679ee73bbee28cab441008f8cca38160cc8f3d05 Mon Sep 17 00:00:00 2001 -From: Krzysztof Kozlowski -Date: Wed, 8 Feb 2023 11:15:39 +0100 -Subject: [PATCH] arm64: dts: qcom: ipq6018: align RPM G-Link node with - bindings - -Bindings expect (and most of DTS use) the RPM G-Link node name to be -"rpm-requests". - -Signed-off-by: Krzysztof Kozlowski -Reviewed-by: Dmitry Baryshkov -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20230208101545.45711-1-krzysztof.kozlowski@linaro.org ---- - arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -176,7 +176,7 @@ - qcom,rpm-msg-ram = <&rpm_msg_ram>; - mboxes = <&apcs_glb 0>; - -- rpm_requests: glink-channel { -+ rpm_requests: rpm-requests { - compatible = "qcom,rpm-ipq6018"; - qcom,glink-channels = "rpm_requests"; - diff --git a/target/linux/qualcommax/patches-6.6/0038-v6.4-arm64-dts-qcom-ipq6018-cp01-c1-drop-SPI-cs-select.patch b/target/linux/qualcommax/patches-6.6/0038-v6.4-arm64-dts-qcom-ipq6018-cp01-c1-drop-SPI-cs-select.patch deleted file mode 100644 index 28688069b8e8..000000000000 --- a/target/linux/qualcommax/patches-6.6/0038-v6.4-arm64-dts-qcom-ipq6018-cp01-c1-drop-SPI-cs-select.patch +++ /dev/null @@ -1,27 +0,0 @@ -From afa8eb675fc6dd606783ed2350de90927d6fb9d3 Mon Sep 17 00:00:00 2001 -From: Krzysztof Kozlowski -Date: Wed, 8 Mar 2023 13:59:01 +0100 -Subject: [PATCH] arm64: dts: qcom: ipq6018-cp01-c1: drop SPI cs-select - -The SPI controller nodes do not use/allow cs-select property: - - ipq6018-cp01-c1.dtb: spi@78b5000: Unevaluated properties are not allowed ('cs-select' was unexpected) - -Signed-off-by: Krzysztof Kozlowski -Reviewed-by: Konrad Dybcio -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20230308125906.236885-6-krzysztof.kozlowski@linaro.org ---- - arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 1 - - 1 file changed, 1 deletion(-) - ---- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts -+++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts -@@ -36,7 +36,6 @@ - }; - - &blsp1_spi1 { -- cs-select = <0>; - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; diff --git a/target/linux/qualcommax/patches-6.6/0039-v6.5-arm64-dts-qcom-add-few-more-reserved-memory-region.patch b/target/linux/qualcommax/patches-6.6/0039-v6.5-arm64-dts-qcom-add-few-more-reserved-memory-region.patch deleted file mode 100644 index d1280b528bec..000000000000 --- a/target/linux/qualcommax/patches-6.6/0039-v6.5-arm64-dts-qcom-add-few-more-reserved-memory-region.patch +++ /dev/null @@ -1,92 +0,0 @@ -From 0cd4e90cb2dec02ff859f5c98f744f43a23aea65 Mon Sep 17 00:00:00 2001 -From: Vignesh Viswanathan -Date: Fri, 26 May 2023 16:36:53 +0530 -Subject: [PATCH] arm64: dts: qcom: add few more reserved memory region - -In IPQ SoCs, bootloader will collect the system RAM contents upon crash -for the post morterm analysis. If we don't reserve the memory region used -by bootloader, obviously linux will consume it and upon next boot on -crash, bootloader will be loaded in the same region, which will lead to -loose some of the data, sometimes we may miss out critical information. -So lets reserve the region used by the bootloader. - -Similarly SBL copies some data into the reserved region and it will be -used in the crash scenario. So reserve 1MB for SBL as well. - -While at it, drop the size padding in the reserved memory region, -wherever applicable. - -Signed-off-by: Vignesh Viswanathan -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20230526110653.27777-4-quic_viswanat@quicinc.com ---- - arch/arm64/boot/dts/qcom/ipq6018.dtsi | 16 +++++++++++++--- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 14 ++++++++++++-- - 2 files changed, 25 insertions(+), 5 deletions(-) - ---- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -154,18 +154,28 @@ - no-map; - }; - -+ bootloader@4a100000 { -+ reg = <0x0 0x4a100000 0x0 0x400000>; -+ no-map; -+ }; -+ -+ sbl@4a500000 { -+ reg = <0x0 0x4a500000 0x0 0x100000>; -+ no-map; -+ }; -+ - tz: memory@4a600000 { -- reg = <0x0 0x4a600000 0x0 0x00400000>; -+ reg = <0x0 0x4a600000 0x0 0x400000>; - no-map; - }; - - smem_region: memory@4aa00000 { -- reg = <0x0 0x4aa00000 0x0 0x00100000>; -+ reg = <0x0 0x4aa00000 0x0 0x100000>; - no-map; - }; - - q6_region: memory@4ab00000 { -- reg = <0x0 0x4ab00000 0x0 0x05500000>; -+ reg = <0x0 0x4ab00000 0x0 0x5500000>; - no-map; - }; - }; ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -85,17 +85,27 @@ - #size-cells = <2>; - ranges; - -+ bootloader@4a600000 { -+ reg = <0x0 0x4a600000 0x0 0x400000>; -+ no-map; -+ }; -+ -+ sbl@4aa00000 { -+ reg = <0x0 0x4aa00000 0x0 0x100000>; -+ no-map; -+ }; -+ - smem@4ab00000 { - compatible = "qcom,smem"; -- reg = <0x0 0x4ab00000 0x0 0x00100000>; -+ reg = <0x0 0x4ab00000 0x0 0x100000>; - no-map; - - hwlocks = <&tcsr_mutex 3>; - }; - - memory@4ac00000 { -+ reg = <0x0 0x4ac00000 0x0 0x400000>; - no-map; -- reg = <0x0 0x4ac00000 0x0 0x00400000>; - }; - }; - diff --git a/target/linux/qualcommax/patches-6.6/0040-v6.5-arm64-dts-qcom-enable-the-download-mode-support.patch b/target/linux/qualcommax/patches-6.6/0040-v6.5-arm64-dts-qcom-enable-the-download-mode-support.patch deleted file mode 100644 index 6dd185f6e060..000000000000 --- a/target/linux/qualcommax/patches-6.6/0040-v6.5-arm64-dts-qcom-enable-the-download-mode-support.patch +++ /dev/null @@ -1,49 +0,0 @@ -From 9b2406aaba7841863ac041225316c1ec1c86ea36 Mon Sep 17 00:00:00 2001 -From: Vignesh Viswanathan -Date: Fri, 26 May 2023 16:36:52 +0530 -Subject: [PATCH] arm64: dts: qcom: enable the download mode support - -Like any other Qualcomm SoCs, IPQ8074 and IPQ6018 also supports the -download mode to collect the RAM dumps if system crashes, to perform -the post mortem analysis. Add support for the same. - -Signed-off-by: Vignesh Viswanathan -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20230526110653.27777-3-quic_viswanat@quicinc.com ---- - arch/arm64/boot/dts/qcom/ipq6018.dtsi | 1 + - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 6 ++++++ - 2 files changed, 7 insertions(+) - ---- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -90,6 +90,7 @@ - firmware { - scm { - compatible = "qcom,scm-ipq6018", "qcom,scm"; -+ qcom,dload-mode = <&tcsr 0x6100>; - }; - }; - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -112,6 +112,7 @@ - firmware { - scm { - compatible = "qcom,scm-ipq8074", "qcom,scm"; -+ qcom,dload-mode = <&tcsr 0x6100>; - }; - }; - -@@ -386,6 +387,11 @@ - #hwlock-cells = <1>; - }; - -+ tcsr: syscon@1937000 { -+ compatible = "qcom,tcsr-ipq8074", "syscon"; -+ reg = <0x01937000 0x21000>; -+ }; -+ - spmi_bus: spmi@200f000 { - compatible = "qcom,spmi-pmic-arb"; - reg = <0x0200f000 0x001000>, diff --git a/target/linux/qualcommax/patches-6.6/0041-v6.5-arm64-dts-qcom-ipq6018-correct-qrng-unit-address.patch b/target/linux/qualcommax/patches-6.6/0041-v6.5-arm64-dts-qcom-ipq6018-correct-qrng-unit-address.patch deleted file mode 100644 index e9b92b596e92..000000000000 --- a/target/linux/qualcommax/patches-6.6/0041-v6.5-arm64-dts-qcom-ipq6018-correct-qrng-unit-address.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 085058786a7890dd44ec623fe5ac74db870f6b93 Mon Sep 17 00:00:00 2001 -From: Krzysztof Kozlowski -Date: Wed, 19 Apr 2023 23:18:39 +0200 -Subject: [PATCH] arm64: dts: qcom: ipq6018: correct qrng unit address - -Match unit-address to reg entry to fix dtbs W=1 warnings: - - Warning (simple_bus_reg): /soc/qrng@e1000: simple-bus unit address format error, expected "e3000" - -Fixes: 5bf635621245 ("arm64: dts: ipq6018: Add a few device nodes") -Signed-off-by: Krzysztof Kozlowski -Reviewed-by: Konrad Dybcio -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20230419211856.79332-1-krzysztof.kozlowski@linaro.org ---- - arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -312,7 +312,7 @@ - status = "disabled"; - }; - -- prng: qrng@e1000 { -+ prng: qrng@e3000 { - compatible = "qcom,prng-ee"; - reg = <0x0 0x000e3000 0x0 0x1000>; - clocks = <&gcc GCC_PRNG_AHB_CLK>; diff --git a/target/linux/qualcommax/patches-6.6/0042-v6.5-arm64-dts-qcom-ipq6018-add-unit-address-to-soc-node.patch b/target/linux/qualcommax/patches-6.6/0042-v6.5-arm64-dts-qcom-ipq6018-add-unit-address-to-soc-node.patch deleted file mode 100644 index 821c9890c6a6..000000000000 --- a/target/linux/qualcommax/patches-6.6/0042-v6.5-arm64-dts-qcom-ipq6018-add-unit-address-to-soc-node.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 393595d4ffbd0a1fafd5548f8de1b8487a037cf2 Mon Sep 17 00:00:00 2001 -From: Krzysztof Kozlowski -Date: Thu, 20 Apr 2023 08:36:04 +0200 -Subject: [PATCH] arm64: dts: qcom: ipq6018: add unit address to soc node - -"soc" node is supposed to have unit address: - - Warning (unit_address_vs_reg): /soc: node has a reg or ranges property, but no unit name - -Signed-off-by: Krzysztof Kozlowski -Reviewed-by: Konrad Dybcio -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20230420063610.11068-1-krzysztof.kozlowski@linaro.org ---- - arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -209,7 +209,7 @@ - hwlocks = <&tcsr_mutex 3>; - }; - -- soc: soc { -+ soc: soc@0 { - #address-cells = <2>; - #size-cells = <2>; - ranges = <0 0 0 0 0x0 0xffffffff>; diff --git a/target/linux/qualcommax/patches-6.6/0043-v6.5-arm64-dts-qcom-ipq6018-add-QFPROM-node.patch b/target/linux/qualcommax/patches-6.6/0043-v6.5-arm64-dts-qcom-ipq6018-add-QFPROM-node.patch deleted file mode 100644 index 68895c5c962d..000000000000 --- a/target/linux/qualcommax/patches-6.6/0043-v6.5-arm64-dts-qcom-ipq6018-add-QFPROM-node.patch +++ /dev/null @@ -1,34 +0,0 @@ -From 546f0617a22a481f3ca1f7e058aea0c40517c64e Mon Sep 17 00:00:00 2001 -From: Kathiravan T -Date: Fri, 26 May 2023 18:23:04 +0530 -Subject: [PATCH] arm64: dts: qcom: ipq6018: add QFPROM node - -IPQ6018 has efuse region to determine the various HW quirks. Lets -add the initial support and the individual fuses will be added as they -are required. - -Signed-off-by: Kathiravan T -Reviewed-by: Dmitry Baryshkov -Reviewed-by: Konrad Dybcio -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20230526125305.19626-4-quic_kathirav@quicinc.com ---- - arch/arm64/boot/dts/qcom/ipq6018.dtsi | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -312,6 +312,13 @@ - status = "disabled"; - }; - -+ qfprom: efuse@a4000 { -+ compatible = "qcom,ipq6018-qfprom", "qcom,qfprom"; -+ reg = <0x0 0x000a4000 0x0 0x2000>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ }; -+ - prng: qrng@e3000 { - compatible = "qcom,prng-ee"; - reg = <0x0 0x000e3000 0x0 0x1000>; diff --git a/target/linux/qualcommax/patches-6.6/0044-v6.5-arm64-dts-qcom-ipq6018-drop-incorrect-SPI-bus.patch b/target/linux/qualcommax/patches-6.6/0044-v6.5-arm64-dts-qcom-ipq6018-drop-incorrect-SPI-bus.patch deleted file mode 100644 index b2057e588ea4..000000000000 --- a/target/linux/qualcommax/patches-6.6/0044-v6.5-arm64-dts-qcom-ipq6018-drop-incorrect-SPI-bus.patch +++ /dev/null @@ -1,37 +0,0 @@ -From b8420d478aa3fc739fcdba6b4b945850b356cb3b Mon Sep 17 00:00:00 2001 -From: Krzysztof Kozlowski -Date: Sun, 16 Apr 2023 14:37:25 +0200 -Subject: [PATCH] arm64: dts: qcom: ipq6018: drop incorrect SPI bus - spi-max-frequency - -The spi-max-frequency property belongs to SPI devices, not SPI -controller: - - ipq6018-cp01-c1.dtb: spi@78b5000: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected) - -Signed-off-by: Krzysztof Kozlowski -Reviewed-by: Konrad Dybcio -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20230416123730.300863-1-krzysztof.kozlowski@linaro.org ---- - arch/arm64/boot/dts/qcom/ipq6018.dtsi | 2 -- - 1 file changed, 2 deletions(-) - ---- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -458,7 +458,6 @@ - #size-cells = <0>; - reg = <0x0 0x078b5000 0x0 0x600>; - interrupts = ; -- spi-max-frequency = <50000000>; - clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; -@@ -473,7 +472,6 @@ - #size-cells = <0>; - reg = <0x0 0x078b6000 0x0 0x600>; - interrupts = ; -- spi-max-frequency = <50000000>; - clocks = <&gcc GCC_BLSP1_QUP2_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; diff --git a/target/linux/qualcommax/patches-6.6/0045-v6.5-arm64-dts-qcom-ipq8074-drop-incorrect-SPI-bus.patch b/target/linux/qualcommax/patches-6.6/0045-v6.5-arm64-dts-qcom-ipq8074-drop-incorrect-SPI-bus.patch deleted file mode 100644 index 52ba16cc9f34..000000000000 --- a/target/linux/qualcommax/patches-6.6/0045-v6.5-arm64-dts-qcom-ipq8074-drop-incorrect-SPI-bus.patch +++ /dev/null @@ -1,29 +0,0 @@ -From e6e0e706940b64e3a77e0a4840037692f109bd5f Mon Sep 17 00:00:00 2001 -From: Krzysztof Kozlowski -Date: Sun, 16 Apr 2023 14:37:26 +0200 -Subject: [PATCH] arm64: dts: qcom: ipq8074: drop incorrect SPI bus - spi-max-frequency - -The spi-max-frequency property belongs to SPI devices, not SPI -controller: - - ipq8074-hk01.dtb: spi@78b5000: Unevaluated properties are not allowed ('spi-max-frequency' was unexpected) - -Signed-off-by: Krzysztof Kozlowski -Reviewed-by: Konrad Dybcio -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20230416123730.300863-2-krzysztof.kozlowski@linaro.org ---- - arch/arm64/boot/dts/qcom/ipq8074.dtsi | 1 - - 1 file changed, 1 deletion(-) - ---- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -487,7 +487,6 @@ - #size-cells = <0>; - reg = <0x078b5000 0x600>; - interrupts = ; -- spi-max-frequency = <50000000>; - clocks = <&gcc GCC_BLSP1_QUP1_SPI_APPS_CLK>, - <&gcc GCC_BLSP1_AHB_CLK>; - clock-names = "core", "iface"; diff --git a/target/linux/qualcommax/patches-6.6/0046-v6.6-clk-qcom-gcc-ipq6018-Use-floor-ops-for-sdcc-clocks.patch b/target/linux/qualcommax/patches-6.6/0046-v6.6-clk-qcom-gcc-ipq6018-Use-floor-ops-for-sdcc-clocks.patch deleted file mode 100644 index 9ae72730d8f7..000000000000 --- a/target/linux/qualcommax/patches-6.6/0046-v6.6-clk-qcom-gcc-ipq6018-Use-floor-ops-for-sdcc-clocks.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 56e5ae0116aef87273cf1812d608645b076e4f02 Mon Sep 17 00:00:00 2001 -From: Mantas Pucka -Date: Tue, 25 Apr 2023 12:11:49 +0300 -Subject: [PATCH] clk: qcom: gcc-ipq6018: Use floor ops for sdcc clocks - -SDCC clocks must be rounded down to avoid overclocking the controller. - -Fixes: d9db07f088af ("clk: qcom: Add ipq6018 Global Clock Controller support") -Signed-off-by: Mantas Pucka -Reviewed-by: Konrad Dybcio -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/1682413909-24927-1-git-send-email-mantas@8devices.com ---- - drivers/clk/qcom/gcc-ipq6018.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/clk/qcom/gcc-ipq6018.c -+++ b/drivers/clk/qcom/gcc-ipq6018.c -@@ -1702,7 +1702,7 @@ static struct clk_rcg2 usb0_mock_utmi_cl - .name = "usb0_mock_utmi_clk_src", - .parent_data = gcc_xo_gpll6_gpll0_gpll0_out_main_div2, - .num_parents = 4, -- .ops = &clk_rcg2_ops, -+ .ops = &clk_rcg2_floor_ops, - }, - }; - diff --git a/target/linux/qualcommax/patches-6.6/0047-v6.6-clk-qcom-gcc-ipq6018-drop-redundant-F-define.patch b/target/linux/qualcommax/patches-6.6/0047-v6.6-clk-qcom-gcc-ipq6018-drop-redundant-F-define.patch deleted file mode 100644 index 19dc9482e67d..000000000000 --- a/target/linux/qualcommax/patches-6.6/0047-v6.6-clk-qcom-gcc-ipq6018-drop-redundant-F-define.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 923f7d678b2ae3d522543058514d5605c185633b Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Mon, 17 Apr 2023 19:44:07 +0200 -Subject: [PATCH] clk: qcom: gcc-ipq6018: drop redundant F define - -The same exact F frequency table entry is defined in clk-rcg.h -Drop the redundant define to cleanup code. - -Signed-off-by: Christian Marangi -Reviewed-by: Konrad Dybcio -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20230417174408.23722-1-ansuelsmth@gmail.com ---- - drivers/clk/qcom/gcc-ipq6018.c | 2 -- - 1 file changed, 2 deletions(-) - ---- a/drivers/clk/qcom/gcc-ipq6018.c -+++ b/drivers/clk/qcom/gcc-ipq6018.c -@@ -26,8 +26,6 @@ - #include "clk-regmap-mux.h" - #include "reset.h" - --#define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) } -- - enum { - P_XO, - P_BIAS_PLL, diff --git a/target/linux/qualcommax/patches-6.6/0048-v6.6-clk-qcom-gcc-ipq6018-update-UBI32-PLL.patch b/target/linux/qualcommax/patches-6.6/0048-v6.6-clk-qcom-gcc-ipq6018-update-UBI32-PLL.patch deleted file mode 100644 index e38b40278cb4..000000000000 --- a/target/linux/qualcommax/patches-6.6/0048-v6.6-clk-qcom-gcc-ipq6018-update-UBI32-PLL.patch +++ /dev/null @@ -1,39 +0,0 @@ -From f4f0c8acee0e41c5fbae7a7ad06087668ddce0d6 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Fri, 26 May 2023 21:08:54 +0200 -Subject: [PATCH] clk: qcom: gcc-ipq6018: update UBI32 PLL - -Update the UBI32 alpha PLL config to the latest values from the downstream -QCA 5.4 kernel. - -Signed-off-by: Robert Marko -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20230526190855.2941291-1-robimarko@gmail.com ---- - drivers/clk/qcom/gcc-ipq6018.c | 7 ++++++- - 1 file changed, 6 insertions(+), 1 deletion(-) - ---- a/drivers/clk/qcom/gcc-ipq6018.c -+++ b/drivers/clk/qcom/gcc-ipq6018.c -@@ -4143,15 +4143,20 @@ static struct clk_branch gcc_dcc_clk = { - - static const struct alpha_pll_config ubi32_pll_config = { - .l = 0x3e, -- .alpha = 0x57, -+ .alpha = 0x6667, - .config_ctl_val = 0x240d6aa8, - .config_ctl_hi_val = 0x3c2, -+ .config_ctl_val = 0x240d4828, -+ .config_ctl_hi_val = 0x6, - .main_output_mask = BIT(0), - .aux_output_mask = BIT(1), - .pre_div_val = 0x0, - .pre_div_mask = BIT(12), - .post_div_val = 0x0, - .post_div_mask = GENMASK(9, 8), -+ .alpha_en_mask = BIT(24), -+ .test_ctl_val = 0x1C0000C0, -+ .test_ctl_hi_val = 0x4000, - }; - - static const struct alpha_pll_config nss_crypto_pll_config = { diff --git a/target/linux/qualcommax/patches-6.6/0049-v6.6-clk-qcom-gcc-ipq6018-remove-duplicate-initializers.patch b/target/linux/qualcommax/patches-6.6/0049-v6.6-clk-qcom-gcc-ipq6018-remove-duplicate-initializers.patch deleted file mode 100644 index e4faac1b6e2c..000000000000 --- a/target/linux/qualcommax/patches-6.6/0049-v6.6-clk-qcom-gcc-ipq6018-remove-duplicate-initializers.patch +++ /dev/null @@ -1,38 +0,0 @@ -From 5ae7899765607e97e5eb34486336898c8d9ec654 Mon Sep 17 00:00:00 2001 -From: Arnd Bergmann -Date: Thu, 1 Jun 2023 23:34:12 +0200 -Subject: [PATCH] clk: qcom: gcc-ipq6018: remove duplicate initializers - -A recent change added new initializers for .config_ctl_val and -.config_ctl_hi_val but left the old values in place: - -drivers/clk/qcom/gcc-ipq6018.c:4155:27: error: initialized field overwritten [-Werror=override-init] - 4155 | .config_ctl_val = 0x240d4828, - | ^~~~~~~~~~ -drivers/clk/qcom/gcc-ipq6018.c:4156:30: error: initialized field overwritten [-Werror=override-init] - 4156 | .config_ctl_hi_val = 0x6, - | ^~~ - -Remove the unused ones now to avoid confusion. - -Fixes: f4f0c8acee0e4 ("clk: qcom: gcc-ipq6018: update UBI32 PLL") -Signed-off-by: Arnd Bergmann -Reviewed-by: Robert Marko -Reviewed-by: Dmitry Baryshkov -Signed-off-by: Bjorn Andersson -Link: https://lore.kernel.org/r/20230601213416.3373599-1-arnd@kernel.org ---- - drivers/clk/qcom/gcc-ipq6018.c | 2 -- - 1 file changed, 2 deletions(-) - ---- a/drivers/clk/qcom/gcc-ipq6018.c -+++ b/drivers/clk/qcom/gcc-ipq6018.c -@@ -4144,8 +4144,6 @@ static struct clk_branch gcc_dcc_clk = { - static const struct alpha_pll_config ubi32_pll_config = { - .l = 0x3e, - .alpha = 0x6667, -- .config_ctl_val = 0x240d6aa8, -- .config_ctl_hi_val = 0x3c2, - .config_ctl_val = 0x240d4828, - .config_ctl_hi_val = 0x6, - .main_output_mask = BIT(0), diff --git a/target/linux/qualcommax/patches-6.6/0050-v6.6-soc-qcom-Add-RPM-processor-subsystem-driver.patch b/target/linux/qualcommax/patches-6.6/0050-v6.6-soc-qcom-Add-RPM-processor-subsystem-driver.patch deleted file mode 100644 index c2c26fb07983..000000000000 --- a/target/linux/qualcommax/patches-6.6/0050-v6.6-soc-qcom-Add-RPM-processor-subsystem-driver.patch +++ /dev/null @@ -1,132 +0,0 @@ -From 8ddfa81d090c71fd6cb3cb8ca1d420c0da33a575 Mon Sep 17 00:00:00 2001 -From: Stephan Gerhold -Date: Thu, 15 Jun 2023 18:50:42 +0200 -Subject: [PATCH] soc: qcom: Add RPM processor/subsystem driver - -Add a simple driver for the qcom,rpm-proc compatible that registers the -"smd-edge" and populates other children defined in the device tree. - -Note that the DT schema belongs to the remoteproc subsystem while this -driver is added inside soc/qcom. I argue that the RPM *is* a remoteproc, -but as an implementation detail in Linux it can currently not benefit -from anything provided by the remoteproc subsystem. The RPM firmware is -usually already loaded and started by earlier components in the boot -chain and is not meant to be ever restarted. - -To avoid breaking existing kernel configurations the driver is always -built when smd-rpm.c is also built. They belong closely together anyway. -To avoid build errors CONFIG_RPMSG_QCOM_SMD must be also built-in if -rpm-proc is. - -Reviewed-by: Konrad Dybcio -Signed-off-by: Stephan Gerhold -Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-9-a07dcdefd918@gerhold.net -Signed-off-by: Bjorn Andersson ---- - drivers/soc/qcom/Kconfig | 1 + - drivers/soc/qcom/Makefile | 2 +- - drivers/soc/qcom/rpm-proc.c | 77 +++++++++++++++++++++++++++++++++++++ - 3 files changed, 79 insertions(+), 1 deletion(-) - create mode 100644 drivers/soc/qcom/rpm-proc.c - ---- a/drivers/soc/qcom/Kconfig -+++ b/drivers/soc/qcom/Kconfig -@@ -153,6 +153,7 @@ config QCOM_SMD_RPM - tristate "Qualcomm Resource Power Manager (RPM) over SMD" - depends on ARCH_QCOM || COMPILE_TEST - depends on RPMSG -+ depends on RPMSG_QCOM_SMD || RPMSG_QCOM_SMD=n - help - If you say yes to this option, support will be included for the - Resource Power Manager system found in the Qualcomm 8974 based ---- a/drivers/soc/qcom/Makefile -+++ b/drivers/soc/qcom/Makefile -@@ -14,7 +14,7 @@ obj-$(CONFIG_QCOM_RMTFS_MEM) += rmtfs_me - obj-$(CONFIG_QCOM_RPMH) += qcom_rpmh.o - qcom_rpmh-y += rpmh-rsc.o - qcom_rpmh-y += rpmh.o --obj-$(CONFIG_QCOM_SMD_RPM) += smd-rpm.o -+obj-$(CONFIG_QCOM_SMD_RPM) += rpm-proc.o smd-rpm.o - obj-$(CONFIG_QCOM_SMEM) += smem.o - obj-$(CONFIG_QCOM_SMEM_STATE) += smem_state.o - obj-$(CONFIG_QCOM_SMP2P) += smp2p.o ---- /dev/null -+++ b/drivers/soc/qcom/rpm-proc.c -@@ -0,0 +1,77 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+/* Copyright (c) 2021-2023, Stephan Gerhold */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+static int rpm_proc_probe(struct platform_device *pdev) -+{ -+ struct qcom_smd_edge *edge = NULL; -+ struct device *dev = &pdev->dev; -+ struct device_node *edge_node; -+ int ret; -+ -+ edge_node = of_get_child_by_name(dev->of_node, "smd-edge"); -+ if (edge_node) { -+ edge = qcom_smd_register_edge(dev, edge_node); -+ of_node_put(edge_node); -+ if (IS_ERR(edge)) -+ return dev_err_probe(dev, PTR_ERR(edge), -+ "Failed to register smd-edge\n"); -+ } -+ -+ ret = devm_of_platform_populate(dev); -+ if (ret) { -+ dev_err(dev, "Failed to populate child devices: %d\n", ret); -+ goto err; -+ } -+ -+ platform_set_drvdata(pdev, edge); -+ return 0; -+err: -+ if (edge) -+ qcom_smd_unregister_edge(edge); -+ return ret; -+} -+ -+static void rpm_proc_remove(struct platform_device *pdev) -+{ -+ struct qcom_smd_edge *edge = platform_get_drvdata(pdev); -+ -+ if (edge) -+ qcom_smd_unregister_edge(edge); -+} -+ -+static const struct of_device_id rpm_proc_of_match[] = { -+ { .compatible = "qcom,rpm-proc", }, -+ { /* sentinel */ } -+}; -+MODULE_DEVICE_TABLE(of, rpm_proc_of_match); -+ -+static struct platform_driver rpm_proc_driver = { -+ .probe = rpm_proc_probe, -+ .remove_new = rpm_proc_remove, -+ .driver = { -+ .name = "qcom-rpm-proc", -+ .of_match_table = rpm_proc_of_match, -+ }, -+}; -+ -+static int __init rpm_proc_init(void) -+{ -+ return platform_driver_register(&rpm_proc_driver); -+} -+arch_initcall(rpm_proc_init); -+ -+static void __exit rpm_proc_exit(void) -+{ -+ platform_driver_unregister(&rpm_proc_driver); -+} -+module_exit(rpm_proc_exit); -+ -+MODULE_DESCRIPTION("Qualcomm RPM processor/subsystem driver"); -+MODULE_AUTHOR("Stephan Gerhold "); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/qualcommax/patches-6.6/0051-v6.6-arm64-dts-qcom-Add-rpm-proc-node-for-GLINK.patch b/target/linux/qualcommax/patches-6.6/0051-v6.6-arm64-dts-qcom-Add-rpm-proc-node-for-GLINK.patch deleted file mode 100644 index 746a391b42e8..000000000000 --- a/target/linux/qualcommax/patches-6.6/0051-v6.6-arm64-dts-qcom-Add-rpm-proc-node-for-GLINK.patch +++ /dev/null @@ -1,93 +0,0 @@ -From 7e1acc8b92a3b67db1e5255adae2851d58d74434 Mon Sep 17 00:00:00 2001 -From: Stephan Gerhold -Date: Thu, 15 Jun 2023 18:50:44 +0200 -Subject: [PATCH] arm64: dts: qcom: Add rpm-proc node for GLINK gplatforms - -Rather than having the RPM GLINK channels as the only child of a dummy -top-level rpm-glink node, switch to representing the RPM as remoteproc -like all the other remoteprocs (modem DSP, ...). - -This allows assigning additional subdevices to it like the MPM -interrupt-controller or rpm-master-stats. - -Tested-by: Konrad Dybcio # SM6375 -Signed-off-by: Stephan Gerhold -Link: https://lore.kernel.org/r/20230531-rpm-rproc-v3-11-a07dcdefd918@gerhold.net -Signed-off-by: Bjorn Andersson ---- - arch/arm64/boot/dts/qcom/ipq6018.dtsi | 48 ++++---- - arch/arm64/boot/dts/qcom/ipq9574.dtsi | 28 +++-- - arch/arm64/boot/dts/qcom/msm8996.dtsi | 113 +++++++++---------- - arch/arm64/boot/dts/qcom/msm8998.dtsi | 102 ++++++++--------- - arch/arm64/boot/dts/qcom/qcm2290.dtsi | 126 ++++++++++----------- - arch/arm64/boot/dts/qcom/qcs404.dtsi | 152 +++++++++++++------------- - arch/arm64/boot/dts/qcom/sdm630.dtsi | 132 +++++++++++----------- - arch/arm64/boot/dts/qcom/sm6115.dtsi | 128 +++++++++++----------- - arch/arm64/boot/dts/qcom/sm6125.dtsi | 140 ++++++++++++------------ - arch/arm64/boot/dts/qcom/sm6375.dtsi | 126 ++++++++++----------- - 10 files changed, 566 insertions(+), 529 deletions(-) - ---- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi -+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -145,6 +145,32 @@ - method = "smc"; - }; - -+ rpm: remoteproc { -+ compatible = "qcom,ipq6018-rpm-proc", "qcom,rpm-proc"; -+ -+ glink-edge { -+ compatible = "qcom,glink-rpm"; -+ interrupts = ; -+ qcom,rpm-msg-ram = <&rpm_msg_ram>; -+ mboxes = <&apcs_glb 0>; -+ -+ rpm_requests: rpm-requests { -+ compatible = "qcom,rpm-ipq6018"; -+ qcom,glink-channels = "rpm_requests"; -+ -+ regulators { -+ compatible = "qcom,rpm-mp5496-regulators"; -+ -+ ipq6018_s2: s2 { -+ regulator-min-microvolt = <725000>; -+ regulator-max-microvolt = <1062500>; -+ regulator-always-on; -+ }; -+ }; -+ }; -+ }; -+ }; -+ - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; -@@ -181,28 +207,6 @@ - }; - }; - -- rpm-glink { -- compatible = "qcom,glink-rpm"; -- interrupts = ; -- qcom,rpm-msg-ram = <&rpm_msg_ram>; -- mboxes = <&apcs_glb 0>; -- -- rpm_requests: rpm-requests { -- compatible = "qcom,rpm-ipq6018"; -- qcom,glink-channels = "rpm_requests"; -- -- regulators { -- compatible = "qcom,rpm-mp5496-regulators"; -- -- ipq6018_s2: s2 { -- regulator-min-microvolt = <725000>; -- regulator-max-microvolt = <1062500>; -- regulator-always-on; -- }; -- }; -- }; -- }; -- - smem { - compatible = "qcom,smem"; - memory-region = <&smem_region>; diff --git a/target/linux/qualcommax/patches-6.6/0052-v6.7-arm64-dts-qcom-ipq6018-include-the-GPLL0-as.patch b/target/linux/qualcommax/patches-6.6/0052-v6.7-arm64-dts-qcom-ipq6018-include-the-GPLL0-as.patch index b70d7bf69c0a..3239404977b9 100644 --- a/target/linux/qualcommax/patches-6.6/0052-v6.7-arm64-dts-qcom-ipq6018-include-the-GPLL0-as.patch +++ b/target/linux/qualcommax/patches-6.6/0052-v6.7-arm64-dts-qcom-ipq6018-include-the-GPLL0-as.patch @@ -22,7 +22,7 @@ Signed-off-by: Bjorn Andersson --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -618,8 +618,8 @@ +@@ -619,8 +619,8 @@ compatible = "qcom,ipq6018-apcs-apps-global"; reg = <0x0 0x0b111000 0x0 0x1000>; #clock-cells = <1>; diff --git a/target/linux/qualcommax/patches-6.6/0053-v6.7-clk-qcom-gcc-ipq6018-add-QUP6-I2C-clock.patch b/target/linux/qualcommax/patches-6.6/0053-v6.7-clk-qcom-gcc-ipq6018-add-QUP6-I2C-clock.patch index 08585289332e..caef49cfaf7b 100644 --- a/target/linux/qualcommax/patches-6.6/0053-v6.7-clk-qcom-gcc-ipq6018-add-QUP6-I2C-clock.patch +++ b/target/linux/qualcommax/patches-6.6/0053-v6.7-clk-qcom-gcc-ipq6018-add-QUP6-I2C-clock.patch @@ -20,7 +20,7 @@ Signed-off-by: Bjorn Andersson --- a/drivers/clk/qcom/gcc-ipq6018.c +++ b/drivers/clk/qcom/gcc-ipq6018.c -@@ -2120,6 +2120,26 @@ static struct clk_branch gcc_blsp1_qup5_ +@@ -2119,6 +2119,26 @@ static struct clk_branch gcc_blsp1_qup5_ }, }; @@ -47,7 +47,7 @@ Signed-off-by: Bjorn Andersson static struct clk_branch gcc_blsp1_qup6_spi_apps_clk = { .halt_reg = 0x0700c, .clkr = { -@@ -4276,6 +4296,7 @@ static struct clk_regmap *gcc_ipq6018_cl +@@ -4275,6 +4295,7 @@ static struct clk_regmap *gcc_ipq6018_cl [GCC_BLSP1_QUP4_SPI_APPS_CLK] = &gcc_blsp1_qup4_spi_apps_clk.clkr, [GCC_BLSP1_QUP5_I2C_APPS_CLK] = &gcc_blsp1_qup5_i2c_apps_clk.clkr, [GCC_BLSP1_QUP5_SPI_APPS_CLK] = &gcc_blsp1_qup5_spi_apps_clk.clkr, diff --git a/target/linux/qualcommax/patches-6.6/0054-v6.8-arm64-dts-qcom-ipq6018-use-CPUFreq-NVMEM.patch b/target/linux/qualcommax/patches-6.6/0054-v6.8-arm64-dts-qcom-ipq6018-use-CPUFreq-NVMEM.patch index 1369a90a8a72..6198e24f38b8 100644 --- a/target/linux/qualcommax/patches-6.6/0054-v6.8-arm64-dts-qcom-ipq6018-use-CPUFreq-NVMEM.patch +++ b/target/linux/qualcommax/patches-6.6/0054-v6.8-arm64-dts-qcom-ipq6018-use-CPUFreq-NVMEM.patch @@ -20,7 +20,7 @@ Signed-off-by: Bjorn Andersson --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -95,42 +95,49 @@ +@@ -96,42 +96,49 @@ }; cpu_opp_table: opp-table-cpu { @@ -71,7 +71,7 @@ Signed-off-by: Bjorn Andersson clock-latency-ns = <200000>; }; }; -@@ -321,6 +328,11 @@ +@@ -322,6 +329,11 @@ reg = <0x0 0x000a4000 0x0 0x2000>; #address-cells = <1>; #size-cells = <1>; diff --git a/target/linux/qualcommax/patches-6.6/0055-v6.8-arm64-dts-ipq6018-Add-remaining-QUP-UART-node.patch b/target/linux/qualcommax/patches-6.6/0055-v6.8-arm64-dts-ipq6018-Add-remaining-QUP-UART-node.patch index ca3c89604706..af3e13258465 100644 --- a/target/linux/qualcommax/patches-6.6/0055-v6.8-arm64-dts-ipq6018-Add-remaining-QUP-UART-node.patch +++ b/target/linux/qualcommax/patches-6.6/0055-v6.8-arm64-dts-ipq6018-Add-remaining-QUP-UART-node.patch @@ -15,7 +15,7 @@ Signed-off-by: Bjorn Andersson --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -458,6 +458,26 @@ +@@ -459,6 +459,26 @@ qcom,ee = <0>; }; @@ -42,7 +42,7 @@ Signed-off-by: Bjorn Andersson blsp1_uart3: serial@78b1000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0x0 0x078b1000 0x0 0x200>; -@@ -466,6 +486,36 @@ +@@ -467,6 +487,36 @@ <&gcc GCC_BLSP1_AHB_CLK>; clock-names = "core", "iface"; status = "disabled"; diff --git a/target/linux/qualcommax/patches-6.6/0056-v6.9-arm64-dts-qcom-Fix-hs_phy_irq-for-QUSB2-targets.patch b/target/linux/qualcommax/patches-6.6/0056-v6.9-arm64-dts-qcom-Fix-hs_phy_irq-for-QUSB2-targets.patch index 0f1b3e6a386b..8eb391505767 100644 --- a/target/linux/qualcommax/patches-6.6/0056-v6.9-arm64-dts-qcom-Fix-hs_phy_irq-for-QUSB2-targets.patch +++ b/target/linux/qualcommax/patches-6.6/0056-v6.9-arm64-dts-qcom-Fix-hs_phy_irq-for-QUSB2-targets.patch @@ -36,7 +36,7 @@ Signed-off-by: Bjorn Andersson --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -430,6 +430,12 @@ +@@ -431,6 +431,12 @@ <&gcc GCC_USB1_MOCK_UTMI_CLK>; assigned-clock-rates = <133330000>, <24000000>; @@ -49,7 +49,7 @@ Signed-off-by: Bjorn Andersson resets = <&gcc GCC_USB1_BCR>; status = "disabled"; -@@ -628,6 +634,13 @@ +@@ -629,6 +635,13 @@ <133330000>, <24000000>; @@ -65,7 +65,7 @@ Signed-off-by: Bjorn Andersson --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -611,6 +611,13 @@ +@@ -632,6 +632,13 @@ <133330000>, <19200000>; @@ -79,7 +79,7 @@ Signed-off-by: Bjorn Andersson power-domains = <&gcc USB0_GDSC>; resets = <&gcc GCC_USB0_BCR>; -@@ -653,6 +660,13 @@ +@@ -674,6 +681,13 @@ <133330000>, <19200000>; diff --git a/target/linux/qualcommax/patches-6.6/0058-v6.9-arm64-dts-qcom-ipq6018-add-tsens-node.patch b/target/linux/qualcommax/patches-6.6/0058-v6.9-arm64-dts-qcom-ipq6018-add-tsens-node.patch index 9de90e4da62c..29d2de9b23b4 100644 --- a/target/linux/qualcommax/patches-6.6/0058-v6.9-arm64-dts-qcom-ipq6018-add-tsens-node.patch +++ b/target/linux/qualcommax/patches-6.6/0058-v6.9-arm64-dts-qcom-ipq6018-add-tsens-node.patch @@ -15,7 +15,7 @@ Signed-off-by: Bjorn Andersson --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -342,6 +342,16 @@ +@@ -343,6 +343,16 @@ clock-names = "core"; }; diff --git a/target/linux/qualcommax/patches-6.6/0059-v6.9-arm64-dts-qcom-ipq6018-add-thermal-zones.patch b/target/linux/qualcommax/patches-6.6/0059-v6.9-arm64-dts-qcom-ipq6018-add-thermal-zones.patch index dab433348a3d..b8b623c8bc25 100644 --- a/target/linux/qualcommax/patches-6.6/0059-v6.9-arm64-dts-qcom-ipq6018-add-thermal-zones.patch +++ b/target/linux/qualcommax/patches-6.6/0059-v6.9-arm64-dts-qcom-ipq6018-add-thermal-zones.patch @@ -55,7 +55,7 @@ Signed-off-by: Bjorn Andersson }; L2_0: l2-cache { -@@ -888,6 +893,122 @@ +@@ -889,6 +894,122 @@ }; }; diff --git a/target/linux/qualcommax/patches-6.6/0060-v6.9-clk-qcom-gcc-ipq6018-add-qdss_at-clock-needed-for-wi.patch b/target/linux/qualcommax/patches-6.6/0060-v6.9-clk-qcom-gcc-ipq6018-add-qdss_at-clock-needed-for-wi.patch index e72d1180c58c..8b455532a131 100644 --- a/target/linux/qualcommax/patches-6.6/0060-v6.9-clk-qcom-gcc-ipq6018-add-qdss_at-clock-needed-for-wi.patch +++ b/target/linux/qualcommax/patches-6.6/0060-v6.9-clk-qcom-gcc-ipq6018-add-qdss_at-clock-needed-for-wi.patch @@ -17,7 +17,7 @@ Signed-off-by: Bjorn Andersson --- a/drivers/clk/qcom/gcc-ipq6018.c +++ b/drivers/clk/qcom/gcc-ipq6018.c -@@ -3523,6 +3523,22 @@ static struct clk_branch gcc_prng_ahb_cl +@@ -3522,6 +3522,22 @@ static struct clk_branch gcc_prng_ahb_cl }, }; @@ -40,7 +40,7 @@ Signed-off-by: Bjorn Andersson static struct clk_branch gcc_qdss_dap_clk = { .halt_reg = 0x29084, .clkr = { -@@ -4362,6 +4378,7 @@ static struct clk_regmap *gcc_ipq6018_cl +@@ -4361,6 +4377,7 @@ static struct clk_regmap *gcc_ipq6018_cl [GCC_SYS_NOC_PCIE0_AXI_CLK] = &gcc_sys_noc_pcie0_axi_clk.clkr, [GCC_PCIE0_PIPE_CLK] = &gcc_pcie0_pipe_clk.clkr, [GCC_PRNG_AHB_CLK] = &gcc_prng_ahb_clk.clkr, diff --git a/target/linux/qualcommax/patches-6.6/0061-v6.8-phy-qcom-qmp-usb-fix-serdes-init-sequence-for-IPQ6018.patch b/target/linux/qualcommax/patches-6.6/0061-v6.8-phy-qcom-qmp-usb-fix-serdes-init-sequence-for-IPQ6018.patch index 97b46f74ef50..4082e3d8526b 100644 --- a/target/linux/qualcommax/patches-6.6/0061-v6.8-phy-qcom-qmp-usb-fix-serdes-init-sequence-for-IPQ6018.patch +++ b/target/linux/qualcommax/patches-6.6/0061-v6.8-phy-qcom-qmp-usb-fix-serdes-init-sequence-for-IPQ6018.patch @@ -20,52 +20,8 @@ Signed-off-by: Vinod Koul --- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c -@@ -233,6 +233,43 @@ static const struct qmp_phy_init_tbl ipq - QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f), - }; - -+static const struct qmp_phy_init_tbl ipq9574_usb3_serdes_tbl[] = { -+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a), -+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08), -+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30), -+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f), -+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b), -+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01), -+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00), -+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06), -+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f), -+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06), -+ /* PLL and Loop filter settings */ -+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x68), -+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0xab), -+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0xaa), -+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x02), -+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x09), -+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16), -+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28), -+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0xa0), -+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0xaa), -+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x29), -+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00), -+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00), -+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00), -+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00), -+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a), -+ /* SSC settings */ -+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01), -+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x7d), -+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01), -+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00), -+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00), -+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0x0a), -+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x05), -+}; -+ - static const struct qmp_phy_init_tbl msm8996_usb3_serdes_tbl[] = { - QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x14), - QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08), -@@ -1591,6 +1628,26 @@ static const char * const qmp_phy_vreg_l - "vdda-phy", "vdda-pll", +@@ -1314,6 +1314,26 @@ static const struct qmp_usb_offsets qmp_ + .rx = 0x1000, }; +static const struct qmp_phy_cfg ipq6018_usb3phy_cfg = { @@ -91,12 +47,12 @@ Signed-off-by: Vinod Koul static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = { .lanes = 1, -@@ -2534,7 +2591,7 @@ static const struct of_device_id qmp_usb - .data = &msm8996_usb3phy_cfg, - }, { +@@ -2238,7 +2258,7 @@ err_node_put: + static const struct of_device_id qmp_usb_of_match_table[] = { + { .compatible = "qcom,ipq6018-qmp-usb3-phy", - .data = &ipq8074_usb3phy_cfg, + .data = &ipq6018_usb3phy_cfg, }, { - .compatible = "qcom,sc7180-qmp-usb3-phy", - .data = &sc7180_usb3phy_cfg, + .compatible = "qcom,ipq8074-qmp-usb3-phy", + .data = &ipq8074_usb3phy_cfg, diff --git a/target/linux/qualcommax/patches-6.6/0062-v6.8-arm64-dts-qcom-ipq8074-Add-QUP4-SPI-node.patch b/target/linux/qualcommax/patches-6.6/0062-v6.8-arm64-dts-qcom-ipq8074-Add-QUP4-SPI-node.patch index 1525726640b7..16d243749033 100644 --- a/target/linux/qualcommax/patches-6.6/0062-v6.8-arm64-dts-qcom-ipq8074-Add-QUP4-SPI-node.patch +++ b/target/linux/qualcommax/patches-6.6/0062-v6.8-arm64-dts-qcom-ipq8074-Add-QUP4-SPI-node.patch @@ -15,7 +15,7 @@ Signed-off-by: Bjorn Andersson --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -529,6 +529,20 @@ +@@ -536,6 +536,20 @@ status = "disabled"; }; diff --git a/target/linux/qualcommax/patches-6.6/0100-clk-qcom-clk-rcg2-introduce-support-for-multiple-con.patch b/target/linux/qualcommax/patches-6.6/0100-clk-qcom-clk-rcg2-introduce-support-for-multiple-con.patch index 9aa0a7952c9f..54d16ba9f55a 100644 --- a/target/linux/qualcommax/patches-6.6/0100-clk-qcom-clk-rcg2-introduce-support-for-multiple-con.patch +++ b/target/linux/qualcommax/patches-6.6/0100-clk-qcom-clk-rcg2-introduce-support-for-multiple-con.patch @@ -176,7 +176,7 @@ Signed-off-by: Christian Marangi return 0; } -@@ -351,6 +408,7 @@ static int __clk_rcg2_set_rate(struct cl +@@ -353,6 +410,7 @@ static int __clk_rcg2_set_rate(struct cl { struct clk_rcg2 *rcg = to_clk_rcg2(hw); const struct freq_tbl *f; @@ -184,7 +184,7 @@ Signed-off-by: Christian Marangi switch (policy) { case FLOOR: -@@ -366,7 +424,15 @@ static int __clk_rcg2_set_rate(struct cl +@@ -368,7 +426,15 @@ static int __clk_rcg2_set_rate(struct cl if (!f) return -EINVAL; diff --git a/target/linux/qualcommax/patches-6.6/0101-clk-qcom-gcc-ipq8074-rework-nss_port5-6-clock-to-mul.patch b/target/linux/qualcommax/patches-6.6/0101-clk-qcom-gcc-ipq8074-rework-nss_port5-6-clock-to-mul.patch index 62a30bbb2281..af1e44a6af73 100644 --- a/target/linux/qualcommax/patches-6.6/0101-clk-qcom-gcc-ipq8074-rework-nss_port5-6-clock-to-mul.patch +++ b/target/linux/qualcommax/patches-6.6/0101-clk-qcom-gcc-ipq8074-rework-nss_port5-6-clock-to-mul.patch @@ -23,7 +23,7 @@ Signed-off-by: Christian Marangi --- a/drivers/clk/qcom/gcc-ipq8074.c +++ b/drivers/clk/qcom/gcc-ipq8074.c -@@ -1676,13 +1676,21 @@ static struct clk_regmap_div nss_port4_t +@@ -1675,13 +1675,21 @@ static struct clk_regmap_div nss_port4_t }, }; @@ -49,7 +49,7 @@ Signed-off-by: Christian Marangi F(156250000, P_UNIPHY1_RX, 2, 0, 0), F(312500000, P_UNIPHY1_RX, 1, 0, 0), { } -@@ -1738,13 +1746,21 @@ static struct clk_regmap_div nss_port5_r +@@ -1737,13 +1745,21 @@ static struct clk_regmap_div nss_port5_r }, }; @@ -75,7 +75,7 @@ Signed-off-by: Christian Marangi F(156250000, P_UNIPHY1_TX, 2, 0, 0), F(312500000, P_UNIPHY1_TX, 1, 0, 0), { } -@@ -1800,13 +1816,21 @@ static struct clk_regmap_div nss_port5_t +@@ -1799,13 +1815,21 @@ static struct clk_regmap_div nss_port5_t }, }; @@ -101,7 +101,7 @@ Signed-off-by: Christian Marangi F(156250000, P_UNIPHY2_RX, 2, 0, 0), F(312500000, P_UNIPHY2_RX, 1, 0, 0), { } -@@ -1857,13 +1881,21 @@ static struct clk_regmap_div nss_port6_r +@@ -1856,13 +1880,21 @@ static struct clk_regmap_div nss_port6_r }, }; diff --git a/target/linux/qualcommax/patches-6.6/0102-arm64-dts-ipq8074-add-reserved-memory-nodes.patch b/target/linux/qualcommax/patches-6.6/0102-arm64-dts-ipq8074-add-reserved-memory-nodes.patch index 3996d15d9d98..6d97641f658c 100644 --- a/target/linux/qualcommax/patches-6.6/0102-arm64-dts-ipq8074-add-reserved-memory-nodes.patch +++ b/target/linux/qualcommax/patches-6.6/0102-arm64-dts-ipq8074-add-reserved-memory-nodes.patch @@ -19,7 +19,7 @@ Signed-off-by: Robert Marko --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -85,6 +85,16 @@ +@@ -86,6 +86,16 @@ #size-cells = <2>; ranges; @@ -36,7 +36,7 @@ Signed-off-by: Robert Marko bootloader@4a600000 { reg = <0x0 0x4a600000 0x0 0x400000>; no-map; -@@ -107,6 +117,21 @@ +@@ -108,6 +118,21 @@ reg = <0x0 0x4ac00000 0x0 0x400000>; no-map; }; diff --git a/target/linux/qualcommax/patches-6.6/0110-arm64-dts-qcom-ipq8074-pass-QMP-PCI-PHY-PIPE-clocks-.patch b/target/linux/qualcommax/patches-6.6/0110-arm64-dts-qcom-ipq8074-pass-QMP-PCI-PHY-PIPE-clocks-.patch index fd97663513e7..9753fa84d337 100644 --- a/target/linux/qualcommax/patches-6.6/0110-arm64-dts-qcom-ipq8074-pass-QMP-PCI-PHY-PIPE-clocks-.patch +++ b/target/linux/qualcommax/patches-6.6/0110-arm64-dts-qcom-ipq8074-pass-QMP-PCI-PHY-PIPE-clocks-.patch @@ -17,7 +17,7 @@ Signed-off-by: Robert Marko --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -399,8 +399,8 @@ +@@ -407,8 +407,8 @@ gcc: gcc@1800000 { compatible = "qcom,gcc-ipq8074"; reg = <0x01800000 0x80000>; diff --git a/target/linux/qualcommax/patches-6.6/0111-arm64-dts-qcom-ipq8074-use-msi-parent-for-PCIe.patch b/target/linux/qualcommax/patches-6.6/0111-arm64-dts-qcom-ipq8074-use-msi-parent-for-PCIe.patch index 9163cd76fecd..ed37601020e5 100644 --- a/target/linux/qualcommax/patches-6.6/0111-arm64-dts-qcom-ipq8074-use-msi-parent-for-PCIe.patch +++ b/target/linux/qualcommax/patches-6.6/0111-arm64-dts-qcom-ipq8074-use-msi-parent-for-PCIe.patch @@ -12,7 +12,7 @@ Signed-off-by: Robert Marko --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -734,7 +734,7 @@ +@@ -755,7 +755,7 @@ reg = <0x0b000000 0x1000>, <0x0b002000 0x1000>; ranges = <0 0xb00a000 0xffd>; @@ -21,7 +21,7 @@ Signed-off-by: Robert Marko compatible = "arm,gic-v2m-frame"; msi-controller; reg = <0x0 0xffd>; -@@ -847,8 +847,7 @@ +@@ -868,8 +868,7 @@ ranges = <0x81000000 0x0 0x00000000 0x10200000 0x0 0x10000>, /* I/O */ <0x82000000 0x0 0x10220000 0x10220000 0x0 0xfde0000>; /* MEM */ @@ -31,7 +31,7 @@ Signed-off-by: Robert Marko #interrupt-cells = <1>; interrupt-map-mask = <0 0 0 0x7>; interrupt-map = <0 0 0 1 &intc 0 142 -@@ -909,8 +908,7 @@ +@@ -930,8 +929,7 @@ ranges = <0x81000000 0x0 0x00000000 0x20200000 0x0 0x10000>, /* I/O */ <0x82000000 0x0 0x20220000 0x20220000 0x0 0xfde0000>; /* MEM */ diff --git a/target/linux/qualcommax/patches-6.6/0112-remoteproc-qcom-Add-PRNG-proxy-clock.patch b/target/linux/qualcommax/patches-6.6/0112-remoteproc-qcom-Add-PRNG-proxy-clock.patch index 0a984948b53f..d3664f293d19 100644 --- a/target/linux/qualcommax/patches-6.6/0112-remoteproc-qcom-Add-PRNG-proxy-clock.patch +++ b/target/linux/qualcommax/patches-6.6/0112-remoteproc-qcom-Add-PRNG-proxy-clock.patch @@ -86,7 +86,7 @@ Signed-off-by: Nikhil Prakash V qcom_q6v5_unprepare(&wcss->q6v5); return 0; -@@ -900,7 +910,21 @@ static int q6v5_alloc_memory_region(stru +@@ -899,7 +909,21 @@ static int q6v5_alloc_memory_region(stru return 0; } @@ -109,7 +109,7 @@ Signed-off-by: Nikhil Prakash V { int ret; -@@ -990,7 +1014,7 @@ static int q6v5_wcss_init_clock(struct q +@@ -989,7 +1013,7 @@ static int q6v5_wcss_init_clock(struct q return 0; } @@ -118,7 +118,7 @@ Signed-off-by: Nikhil Prakash V { wcss->cx_supply = devm_regulator_get(wcss->dev, "cx"); if (IS_ERR(wcss->cx_supply)) -@@ -1034,12 +1058,14 @@ static int q6v5_wcss_probe(struct platfo +@@ -1033,12 +1057,14 @@ static int q6v5_wcss_probe(struct platfo if (ret) goto free_rproc; @@ -136,7 +136,7 @@ Signed-off-by: Nikhil Prakash V if (ret) goto free_rproc; } -@@ -1087,6 +1113,7 @@ static int q6v5_wcss_remove(struct platf +@@ -1084,6 +1110,7 @@ static void q6v5_wcss_remove(struct plat } static const struct wcss_data wcss_ipq8074_res_init = { @@ -144,7 +144,7 @@ Signed-off-by: Nikhil Prakash V .firmware_name = "IPQ8074/q6_fw.mdt", .crash_reason_smem = WCSS_CRASH_REASON, .aon_reset_required = true, -@@ -1096,6 +1123,8 @@ static const struct wcss_data wcss_ipq80 +@@ -1093,6 +1120,8 @@ static const struct wcss_data wcss_ipq80 }; static const struct wcss_data wcss_qcs404_res_init = { diff --git a/target/linux/qualcommax/patches-6.6/0113-remoteproc-qcom-Add-secure-PIL-support.patch b/target/linux/qualcommax/patches-6.6/0113-remoteproc-qcom-Add-secure-PIL-support.patch index 0328efc041bd..8bb5bc695b87 100644 --- a/target/linux/qualcommax/patches-6.6/0113-remoteproc-qcom-Add-secure-PIL-support.patch +++ b/target/linux/qualcommax/patches-6.6/0113-remoteproc-qcom-Add-secure-PIL-support.patch @@ -115,7 +115,7 @@ Signed-off-by: Nikhil Prakash V if (ret) return ret; -@@ -1036,6 +1068,9 @@ static int q6v5_wcss_probe(struct platfo +@@ -1035,6 +1067,9 @@ static int q6v5_wcss_probe(struct platfo if (!desc) return -EINVAL; @@ -125,7 +125,7 @@ Signed-off-by: Nikhil Prakash V rproc = rproc_alloc(&pdev->dev, pdev->name, desc->ops, desc->firmware_name, sizeof(*wcss)); if (!rproc) { -@@ -1049,6 +1084,7 @@ static int q6v5_wcss_probe(struct platfo +@@ -1048,6 +1083,7 @@ static int q6v5_wcss_probe(struct platfo wcss->version = desc->version; wcss->requires_force_stop = desc->requires_force_stop; @@ -133,7 +133,7 @@ Signed-off-by: Nikhil Prakash V ret = q6v5_wcss_init_mmio(wcss, pdev); if (ret) -@@ -1120,6 +1156,7 @@ static const struct wcss_data wcss_ipq80 +@@ -1117,6 +1153,7 @@ static const struct wcss_data wcss_ipq80 .wcss_q6_reset_required = true, .ops = &q6v5_wcss_ipq8074_ops, .requires_force_stop = true, diff --git a/target/linux/qualcommax/patches-6.6/0114-remoteproc-qcom-Add-support-for-split-q6-m3-wlan-fir.patch b/target/linux/qualcommax/patches-6.6/0114-remoteproc-qcom-Add-support-for-split-q6-m3-wlan-fir.patch index e5c9506c89ce..f7e576cf8efb 100644 --- a/target/linux/qualcommax/patches-6.6/0114-remoteproc-qcom-Add-support-for-split-q6-m3-wlan-fir.patch +++ b/target/linux/qualcommax/patches-6.6/0114-remoteproc-qcom-Add-support-for-split-q6-m3-wlan-fir.patch @@ -65,7 +65,7 @@ Signed-off-by: Nikhil Prakash V if (wcss->need_mem_protection) ret = qcom_mdt_load(wcss->dev, fw, rproc->firmware, WCNSS_PAS_ID, wcss->mem_region, -@@ -1072,7 +1095,7 @@ static int q6v5_wcss_probe(struct platfo +@@ -1071,7 +1094,7 @@ static int q6v5_wcss_probe(struct platfo return -EPROBE_DEFER; rproc = rproc_alloc(&pdev->dev, pdev->name, desc->ops, @@ -74,7 +74,7 @@ Signed-off-by: Nikhil Prakash V if (!rproc) { dev_err(&pdev->dev, "failed to allocate rproc\n"); return -ENOMEM; -@@ -1085,6 +1108,7 @@ static int q6v5_wcss_probe(struct platfo +@@ -1084,6 +1107,7 @@ static int q6v5_wcss_probe(struct platfo wcss->version = desc->version; wcss->requires_force_stop = desc->requires_force_stop; wcss->need_mem_protection = desc->need_mem_protection; @@ -82,7 +82,7 @@ Signed-off-by: Nikhil Prakash V ret = q6v5_wcss_init_mmio(wcss, pdev); if (ret) -@@ -1150,7 +1174,8 @@ static int q6v5_wcss_remove(struct platf +@@ -1147,7 +1171,8 @@ static void q6v5_wcss_remove(struct plat static const struct wcss_data wcss_ipq8074_res_init = { .init_clock = ipq8074_init_clock, @@ -92,7 +92,7 @@ Signed-off-by: Nikhil Prakash V .crash_reason_smem = WCSS_CRASH_REASON, .aon_reset_required = true, .wcss_q6_reset_required = true, -@@ -1163,7 +1188,7 @@ static const struct wcss_data wcss_qcs40 +@@ -1160,7 +1185,7 @@ static const struct wcss_data wcss_qcs40 .init_clock = qcs404_init_clock, .init_regulator = qcs404_init_regulator, .crash_reason_smem = WCSS_CRASH_REASON, diff --git a/target/linux/qualcommax/patches-6.6/0115-remoteproc-qcom-Add-ssr-subdevice-identifier.patch b/target/linux/qualcommax/patches-6.6/0115-remoteproc-qcom-Add-ssr-subdevice-identifier.patch index be63d46e8e4b..7a07b561e494 100644 --- a/target/linux/qualcommax/patches-6.6/0115-remoteproc-qcom-Add-ssr-subdevice-identifier.patch +++ b/target/linux/qualcommax/patches-6.6/0115-remoteproc-qcom-Add-ssr-subdevice-identifier.patch @@ -14,7 +14,7 @@ Signed-off-by: Nikhil Prakash V --- a/drivers/remoteproc/qcom_q6v5_wcss.c +++ b/drivers/remoteproc/qcom_q6v5_wcss.c -@@ -1179,6 +1179,7 @@ static const struct wcss_data wcss_ipq80 +@@ -1176,6 +1176,7 @@ static const struct wcss_data wcss_ipq80 .crash_reason_smem = WCSS_CRASH_REASON, .aon_reset_required = true, .wcss_q6_reset_required = true, diff --git a/target/linux/qualcommax/patches-6.6/0116-remoteproc-qcom-Update-regmap-offsets-for-halt-regis.patch b/target/linux/qualcommax/patches-6.6/0116-remoteproc-qcom-Update-regmap-offsets-for-halt-regis.patch index f0b717210fbe..7ef6884e4565 100644 --- a/target/linux/qualcommax/patches-6.6/0116-remoteproc-qcom-Update-regmap-offsets-for-halt-regis.patch +++ b/target/linux/qualcommax/patches-6.6/0116-remoteproc-qcom-Update-regmap-offsets-for-halt-regis.patch @@ -48,7 +48,7 @@ Signed-off-by: Sricharan R } return 0; -@@ -929,9 +933,9 @@ static int q6v5_wcss_init_mmio(struct q6 +@@ -928,9 +932,9 @@ static int q6v5_wcss_init_mmio(struct q6 return -EINVAL; } @@ -61,7 +61,7 @@ Signed-off-by: Sricharan R return 0; } -@@ -1179,6 +1183,7 @@ static const struct wcss_data wcss_ipq80 +@@ -1176,6 +1180,7 @@ static const struct wcss_data wcss_ipq80 .crash_reason_smem = WCSS_CRASH_REASON, .aon_reset_required = true, .wcss_q6_reset_required = true, @@ -69,7 +69,7 @@ Signed-off-by: Sricharan R .ssr_name = "q6wcss", .ops = &q6v5_wcss_ipq8074_ops, .requires_force_stop = true, -@@ -1193,6 +1198,7 @@ static const struct wcss_data wcss_qcs40 +@@ -1190,6 +1195,7 @@ static const struct wcss_data wcss_qcs40 .version = WCSS_QCS404, .aon_reset_required = false, .wcss_q6_reset_required = false, diff --git a/target/linux/qualcommax/patches-6.6/0118-clk-qcom-Add-WCSSAON-reset.patch b/target/linux/qualcommax/patches-6.6/0118-clk-qcom-Add-WCSSAON-reset.patch index be0524338daf..9fa0243f153a 100644 --- a/target/linux/qualcommax/patches-6.6/0118-clk-qcom-Add-WCSSAON-reset.patch +++ b/target/linux/qualcommax/patches-6.6/0118-clk-qcom-Add-WCSSAON-reset.patch @@ -15,7 +15,7 @@ Acked-by: Stephen Boyd --- a/drivers/clk/qcom/gcc-ipq8074.c +++ b/drivers/clk/qcom/gcc-ipq8074.c -@@ -4711,6 +4711,7 @@ static const struct qcom_reset_map gcc_i +@@ -4710,6 +4710,7 @@ static const struct qcom_reset_map gcc_i [GCC_NSSPORT4_RESET] = { .reg = 0x68014, .bitmask = BIT(27) | GENMASK(9, 8) }, [GCC_NSSPORT5_RESET] = { .reg = 0x68014, .bitmask = BIT(28) | GENMASK(11, 10) }, [GCC_NSSPORT6_RESET] = { .reg = 0x68014, .bitmask = BIT(29) | GENMASK(13, 12) }, diff --git a/target/linux/qualcommax/patches-6.6/0119-remoteproc-wcss-disable-auto-boot-for-IPQ8074.patch b/target/linux/qualcommax/patches-6.6/0119-remoteproc-wcss-disable-auto-boot-for-IPQ8074.patch index 8674522a1129..ecd87ac7a84f 100644 --- a/target/linux/qualcommax/patches-6.6/0119-remoteproc-wcss-disable-auto-boot-for-IPQ8074.patch +++ b/target/linux/qualcommax/patches-6.6/0119-remoteproc-wcss-disable-auto-boot-for-IPQ8074.patch @@ -22,7 +22,7 @@ Signed-off-by: Robert Marko }; static int q6v5_wcss_reset(struct q6v5_wcss *wcss) -@@ -1150,6 +1151,7 @@ static int q6v5_wcss_probe(struct platfo +@@ -1149,6 +1150,7 @@ static int q6v5_wcss_probe(struct platfo desc->sysmon_name, desc->ssctl_id); @@ -30,7 +30,7 @@ Signed-off-by: Robert Marko ret = rproc_add(rproc); if (ret) goto free_rproc; -@@ -1188,6 +1190,7 @@ static const struct wcss_data wcss_ipq80 +@@ -1185,6 +1187,7 @@ static const struct wcss_data wcss_ipq80 .ops = &q6v5_wcss_ipq8074_ops, .requires_force_stop = true, .need_mem_protection = true, @@ -38,7 +38,7 @@ Signed-off-by: Robert Marko }; static const struct wcss_data wcss_qcs404_res_init = { -@@ -1204,6 +1207,7 @@ static const struct wcss_data wcss_qcs40 +@@ -1201,6 +1204,7 @@ static const struct wcss_data wcss_qcs40 .ssctl_id = 0x12, .ops = &q6v5_wcss_qcs404_ops, .requires_force_stop = false, diff --git a/target/linux/qualcommax/patches-6.6/0120-arm64-dts-qcom-Enable-Q6v5-WCSS-for-ipq8074-SoC.patch b/target/linux/qualcommax/patches-6.6/0120-arm64-dts-qcom-Enable-Q6v5-WCSS-for-ipq8074-SoC.patch index 17ecd069a6e4..2ea9bcb9fc00 100644 --- a/target/linux/qualcommax/patches-6.6/0120-arm64-dts-qcom-Enable-Q6v5-WCSS-for-ipq8074-SoC.patch +++ b/target/linux/qualcommax/patches-6.6/0120-arm64-dts-qcom-Enable-Q6v5-WCSS-for-ipq8074-SoC.patch @@ -16,7 +16,7 @@ Signed-off-by: Robert Marko --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -141,6 +141,32 @@ +@@ -142,6 +142,32 @@ }; }; @@ -46,10 +46,10 @@ Signed-off-by: Robert Marko + }; + }; + - soc: soc { - #address-cells = <0x1>; - #size-cells = <0x1>; -@@ -417,6 +443,11 @@ + soc: soc@0 { + #address-cells = <1>; + #size-cells = <1>; +@@ -425,6 +451,11 @@ reg = <0x01937000 0x21000>; }; @@ -61,7 +61,7 @@ Signed-off-by: Robert Marko spmi_bus: spmi@200f000 { compatible = "qcom,spmi-pmic-arb"; reg = <0x0200f000 0x001000>, -@@ -949,6 +980,56 @@ +@@ -970,6 +1001,56 @@ "axi_s_sticky"; status = "disabled"; }; diff --git a/target/linux/qualcommax/patches-6.6/0121-arm64-dts-ipq8074-Add-WLAN-node.patch b/target/linux/qualcommax/patches-6.6/0121-arm64-dts-ipq8074-Add-WLAN-node.patch index 76d3f35dd24a..627b0711b7f0 100644 --- a/target/linux/qualcommax/patches-6.6/0121-arm64-dts-ipq8074-Add-WLAN-node.patch +++ b/target/linux/qualcommax/patches-6.6/0121-arm64-dts-ipq8074-Add-WLAN-node.patch @@ -15,7 +15,7 @@ Signed-off-by: Robert Marko --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -1030,6 +1030,117 @@ +@@ -1051,6 +1051,117 @@ }; }; }; diff --git a/target/linux/qualcommax/patches-6.6/0129-arm64-dts-qcom-ipq8074-add-QFPROM-fuses.patch b/target/linux/qualcommax/patches-6.6/0129-arm64-dts-qcom-ipq8074-add-QFPROM-fuses.patch index 8ec466012363..7730ad89f578 100644 --- a/target/linux/qualcommax/patches-6.6/0129-arm64-dts-qcom-ipq8074-add-QFPROM-fuses.patch +++ b/target/linux/qualcommax/patches-6.6/0129-arm64-dts-qcom-ipq8074-add-QFPROM-fuses.patch @@ -12,15 +12,10 @@ Signed-off-by: Robert Marko --- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi -@@ -343,6 +343,113 @@ - status = "disabled"; - }; - -+ qfprom: efuse@a4000 { -+ compatible = "qcom,ipq8074-qfprom", "qcom,qfprom"; -+ reg = <0x000a4000 0x1000>; -+ #address-cells = <1>; -+ #size-cells = <1>; +@@ -349,6 +349,106 @@ + reg = <0x000a4000 0x2000>; + #address-cells = <1>; + #size-cells = <1>; + + cpr_efuse_speedbin: speedbin@125 { + reg = <0x125 0x1>; @@ -121,8 +116,6 @@ Signed-off-by: Robert Marko + reg = <0x23c 0x1>; + bits = <0 7>; + }; -+ }; -+ + }; + prng: rng@e3000 { - compatible = "qcom,prng-ee"; - reg = <0x000e3000 0x1000>; diff --git a/target/linux/qualcommax/patches-6.6/0130-arm64-dts-qcom-ipq8074-add-CPU-OPP-table.patch b/target/linux/qualcommax/patches-6.6/0130-arm64-dts-qcom-ipq8074-add-CPU-OPP-table.patch index 9c1e7b9d29c9..a89e50f52f1a 100644 --- a/target/linux/qualcommax/patches-6.6/0130-arm64-dts-qcom-ipq8074-add-CPU-OPP-table.patch +++ b/target/linux/qualcommax/patches-6.6/0130-arm64-dts-qcom-ipq8074-add-CPU-OPP-table.patch @@ -45,7 +45,7 @@ Signed-off-by: Robert Marko }; L2_0: l2-cache { -@@ -83,6 +87,54 @@ +@@ -84,6 +88,54 @@ }; }; diff --git a/target/linux/qualcommax/patches-6.6/0136-remoteproc-qcom-wcss-populate-driver-data-for-IPQ601.patch b/target/linux/qualcommax/patches-6.6/0136-remoteproc-qcom-wcss-populate-driver-data-for-IPQ601.patch index 9a5a3407e19a..eaf6e37275d7 100644 --- a/target/linux/qualcommax/patches-6.6/0136-remoteproc-qcom-wcss-populate-driver-data-for-IPQ601.patch +++ b/target/linux/qualcommax/patches-6.6/0136-remoteproc-qcom-wcss-populate-driver-data-for-IPQ601.patch @@ -12,7 +12,7 @@ Signed-off-by: Gokul Sriram Palanisamy --- a/drivers/remoteproc/qcom_q6v5_wcss.c +++ b/drivers/remoteproc/qcom_q6v5_wcss.c -@@ -970,7 +970,7 @@ static int q6v5_alloc_memory_region(stru +@@ -969,7 +969,7 @@ static int q6v5_alloc_memory_region(stru return 0; } @@ -21,7 +21,7 @@ Signed-off-by: Gokul Sriram Palanisamy { int ret; -@@ -1179,7 +1179,7 @@ static int q6v5_wcss_remove(struct platf +@@ -1176,7 +1176,7 @@ static void q6v5_wcss_remove(struct plat } static const struct wcss_data wcss_ipq8074_res_init = { @@ -30,7 +30,7 @@ Signed-off-by: Gokul Sriram Palanisamy .q6_firmware_name = "IPQ8074/q6_fw.mdt", .m3_firmware_name = "IPQ8074/m3_fw.mdt", .crash_reason_smem = WCSS_CRASH_REASON, -@@ -1193,6 +1193,20 @@ static const struct wcss_data wcss_ipq80 +@@ -1190,6 +1190,20 @@ static const struct wcss_data wcss_ipq80 .need_auto_boot = false, }; @@ -51,7 +51,7 @@ Signed-off-by: Gokul Sriram Palanisamy static const struct wcss_data wcss_qcs404_res_init = { .init_clock = qcs404_init_clock, .init_regulator = qcs404_init_regulator, -@@ -1212,6 +1226,7 @@ static const struct wcss_data wcss_qcs40 +@@ -1209,6 +1223,7 @@ static const struct wcss_data wcss_qcs40 static const struct of_device_id q6v5_wcss_of_match[] = { { .compatible = "qcom,ipq8074-wcss-pil", .data = &wcss_ipq8074_res_init }, diff --git a/target/linux/qualcommax/patches-6.6/0137-arm64-dts-qcom-ipq6018-add-SDHCI-node.patch b/target/linux/qualcommax/patches-6.6/0137-arm64-dts-qcom-ipq6018-add-SDHCI-node.patch index bfca74ba766e..e1296aa79271 100644 --- a/target/linux/qualcommax/patches-6.6/0137-arm64-dts-qcom-ipq6018-add-SDHCI-node.patch +++ b/target/linux/qualcommax/patches-6.6/0137-arm64-dts-qcom-ipq6018-add-SDHCI-node.patch @@ -13,7 +13,7 @@ Tested-by: Robert Marko --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -469,6 +469,29 @@ +@@ -470,6 +470,29 @@ }; }; diff --git a/target/linux/qualcommax/patches-6.6/0139-arm64-dts-qcom-ipq6018-add-LDOA2-regulator.patch b/target/linux/qualcommax/patches-6.6/0139-arm64-dts-qcom-ipq6018-add-LDOA2-regulator.patch index 8889db97f91d..2f7746646a4c 100644 --- a/target/linux/qualcommax/patches-6.6/0139-arm64-dts-qcom-ipq6018-add-LDOA2-regulator.patch +++ b/target/linux/qualcommax/patches-6.6/0139-arm64-dts-qcom-ipq6018-add-LDOA2-regulator.patch @@ -13,7 +13,7 @@ Signed-off-by: Chukun Pan --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -178,6 +178,11 @@ +@@ -179,6 +179,11 @@ regulator-max-microvolt = <1062500>; regulator-always-on; }; diff --git a/target/linux/qualcommax/patches-6.6/0400-mtd-rawnand-add-support-for-TH58NYG3S0HBAI4.patch b/target/linux/qualcommax/patches-6.6/0400-mtd-rawnand-add-support-for-TH58NYG3S0HBAI4.patch index c52681928b44..c7632d47c023 100644 --- a/target/linux/qualcommax/patches-6.6/0400-mtd-rawnand-add-support-for-TH58NYG3S0HBAI4.patch +++ b/target/linux/qualcommax/patches-6.6/0400-mtd-rawnand-add-support-for-TH58NYG3S0HBAI4.patch @@ -30,7 +30,7 @@ Signed-off-by: Chukun Pan --- a/drivers/mtd/nand/raw/nand_ids.c +++ b/drivers/mtd/nand/raw/nand_ids.c -@@ -55,6 +55,9 @@ struct nand_flash_dev nand_flash_ids[] = +@@ -58,6 +58,9 @@ struct nand_flash_dev nand_flash_ids[] = { .id = {0xad, 0xde, 0x14, 0xa7, 0x42, 0x4a} }, SZ_16K, SZ_8K, SZ_4M, NAND_NEED_SCRAMBLING, 6, 1664, NAND_ECC_INFO(40, SZ_1K) }, diff --git a/target/linux/qualcommax/patches-6.6/0901-regulator-add-Qualcomm-CPR-regulators.patch b/target/linux/qualcommax/patches-6.6/0901-regulator-add-Qualcomm-CPR-regulators.patch index 9b9f7159f35b..9b2772c01a52 100644 --- a/target/linux/qualcommax/patches-6.6/0901-regulator-add-Qualcomm-CPR-regulators.patch +++ b/target/linux/qualcommax/patches-6.6/0901-regulator-add-Qualcomm-CPR-regulators.patch @@ -25,7 +25,7 @@ Signed-off-by: Robert Marko --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig -@@ -1524,4 +1524,37 @@ config REGULATOR_QCOM_LABIBB +@@ -1663,4 +1663,37 @@ config REGULATOR_QCOM_LABIBB boost regulator and IBB can be used as a negative boost regulator for LCD display panel. @@ -65,7 +65,7 @@ Signed-off-by: Robert Marko endif --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile -@@ -110,6 +110,9 @@ obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qco +@@ -116,6 +116,9 @@ obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qco obj-$(CONFIG_REGULATOR_QCOM_SMD_RPM) += qcom_smd-regulator.o obj-$(CONFIG_REGULATOR_QCOM_SPMI) += qcom_spmi-regulator.o obj-$(CONFIG_REGULATOR_QCOM_USB_VBUS) += qcom_usb_vbus-regulator.o diff --git a/target/linux/qualcommax/patches-6.6/0904-clk-qcom-ipq6018-workaround-networking-clock-parenti.patch b/target/linux/qualcommax/patches-6.6/0904-clk-qcom-ipq6018-workaround-networking-clock-parenti.patch index 175d47584935..9172a02b0832 100644 --- a/target/linux/qualcommax/patches-6.6/0904-clk-qcom-ipq6018-workaround-networking-clock-parenti.patch +++ b/target/linux/qualcommax/patches-6.6/0904-clk-qcom-ipq6018-workaround-networking-clock-parenti.patch @@ -19,7 +19,7 @@ Signed-off-by: Robert Marko --- a/drivers/clk/qcom/gcc-ipq6018.c +++ b/drivers/clk/qcom/gcc-ipq6018.c -@@ -361,7 +361,7 @@ static const struct freq_tbl ftbl_nss_pp +@@ -360,7 +360,7 @@ static const struct freq_tbl ftbl_nss_pp static const struct clk_parent_data gcc_xo_bias_gpll0_gpll4_nss_ubi32[] = { { .fw_name = "xo" }, @@ -28,7 +28,7 @@ Signed-off-by: Robert Marko { .hw = &gpll0.clkr.hw }, { .hw = &gpll4.clkr.hw }, { .hw = &nss_crypto_pll.clkr.hw }, -@@ -527,12 +527,12 @@ static const struct freq_tbl ftbl_nss_po +@@ -526,12 +526,12 @@ static const struct freq_tbl ftbl_nss_po static const struct clk_parent_data gcc_xo_uniphy0_rx_tx_uniphy1_rx_tx_ubi32_bias[] = { { .fw_name = "xo" }, @@ -46,7 +46,7 @@ Signed-off-by: Robert Marko }; static const struct parent_map -@@ -574,12 +574,12 @@ static const struct freq_tbl ftbl_nss_po +@@ -573,12 +573,12 @@ static const struct freq_tbl ftbl_nss_po static const struct clk_parent_data gcc_xo_uniphy0_tx_rx_uniphy1_tx_rx_ubi32_bias[] = { { .fw_name = "xo" }, @@ -64,7 +64,7 @@ Signed-off-by: Robert Marko }; static const struct parent_map -@@ -715,10 +715,10 @@ static const struct freq_tbl ftbl_nss_po +@@ -714,10 +714,10 @@ static const struct freq_tbl ftbl_nss_po static const struct clk_parent_data gcc_xo_uniphy0_rx_tx_ubi32_bias[] = { { .fw_name = "xo" }, @@ -78,7 +78,7 @@ Signed-off-by: Robert Marko }; static const struct parent_map gcc_xo_uniphy0_rx_tx_ubi32_bias_map[] = { -@@ -751,10 +751,10 @@ static const struct freq_tbl ftbl_nss_po +@@ -750,10 +750,10 @@ static const struct freq_tbl ftbl_nss_po static const struct clk_parent_data gcc_xo_uniphy0_tx_rx_ubi32_bias[] = { { .fw_name = "xo" }, @@ -92,7 +92,7 @@ Signed-off-by: Robert Marko }; static const struct parent_map gcc_xo_uniphy0_tx_rx_ubi32_bias_map[] = { -@@ -1898,12 +1898,11 @@ static const struct freq_tbl ftbl_ubi32_ +@@ -1897,12 +1897,11 @@ static const struct freq_tbl ftbl_ubi32_ { } }; diff --git a/target/linux/qualcommax/patches-6.6/0905-remoteproc-q6v5_wcss-change-ssr-name-for-ipq6018-wif.patch b/target/linux/qualcommax/patches-6.6/0905-remoteproc-q6v5_wcss-change-ssr-name-for-ipq6018-wif.patch index 58bea43892f3..db20d3f2c446 100644 --- a/target/linux/qualcommax/patches-6.6/0905-remoteproc-q6v5_wcss-change-ssr-name-for-ipq6018-wif.patch +++ b/target/linux/qualcommax/patches-6.6/0905-remoteproc-q6v5_wcss-change-ssr-name-for-ipq6018-wif.patch @@ -18,7 +18,7 @@ Signed-off-by: Mantas Pucka --- a/drivers/remoteproc/qcom_q6v5_wcss.c +++ b/drivers/remoteproc/qcom_q6v5_wcss.c -@@ -1143,8 +1143,8 @@ static int q6v5_wcss_probe(struct platfo +@@ -1142,8 +1142,8 @@ static int q6v5_wcss_probe(struct platfo if (ret) goto free_rproc; @@ -29,7 +29,7 @@ Signed-off-by: Mantas Pucka if (desc->ssctl_id) wcss->sysmon = qcom_add_sysmon_subdev(rproc, -@@ -1201,7 +1201,7 @@ static const struct wcss_data wcss_ipq60 +@@ -1198,7 +1198,7 @@ static const struct wcss_data wcss_ipq60 .aon_reset_required = true, .wcss_q6_reset_required = true, .bcr_reset_required = false, diff --git a/target/linux/qualcommax/patches-6.6/0906-arm64-dts-qcom-ipq6018-add-wifi-node.patch b/target/linux/qualcommax/patches-6.6/0906-arm64-dts-qcom-ipq6018-add-wifi-node.patch index 247df110fff7..3e040cd2fd46 100644 --- a/target/linux/qualcommax/patches-6.6/0906-arm64-dts-qcom-ipq6018-add-wifi-node.patch +++ b/target/linux/qualcommax/patches-6.6/0906-arm64-dts-qcom-ipq6018-add-wifi-node.patch @@ -15,7 +15,7 @@ Signed-off-by: Mantas Pucka --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -807,6 +807,102 @@ +@@ -808,6 +808,102 @@ }; }; diff --git a/target/linux/qualcommax/patches-6.6/0907-soc-qcom-fix-smp2p-ack-on-ipq6018.patch b/target/linux/qualcommax/patches-6.6/0907-soc-qcom-fix-smp2p-ack-on-ipq6018.patch index 88e294562d01..d1bca14063e8 100644 --- a/target/linux/qualcommax/patches-6.6/0907-soc-qcom-fix-smp2p-ack-on-ipq6018.patch +++ b/target/linux/qualcommax/patches-6.6/0907-soc-qcom-fix-smp2p-ack-on-ipq6018.patch @@ -15,7 +15,7 @@ Signed-off-by: Mantas Pucka --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -1155,6 +1155,7 @@ +@@ -1156,6 +1156,7 @@ wcss_smp2p_out: master-kernel { qcom,entry-name = "master-kernel"; diff --git a/target/linux/qualcommax/patches-6.6/0908-remoteproc-qcom_q6v5_wcss-add-optional-qdss_at-clock.patch b/target/linux/qualcommax/patches-6.6/0908-remoteproc-qcom_q6v5_wcss-add-optional-qdss_at-clock.patch index cfc9adda0430..309c4247316a 100644 --- a/target/linux/qualcommax/patches-6.6/0908-remoteproc-qcom_q6v5_wcss-add-optional-qdss_at-clock.patch +++ b/target/linux/qualcommax/patches-6.6/0908-remoteproc-qcom_q6v5_wcss-add-optional-qdss_at-clock.patch @@ -40,7 +40,7 @@ Signed-off-by: Mantas Pucka clk_disable_unprepare(wcss->prng_clk); qcom_q6v5_unprepare(&wcss->q6v5); -@@ -981,6 +987,12 @@ static int ipq_init_clock(struct q6v5_wc +@@ -980,6 +986,12 @@ static int ipq_init_clock(struct q6v5_wc dev_err(wcss->dev, "Failed to get prng clock\n"); return ret; } diff --git a/target/linux/qualcommax/patches-6.6/0909-arm64-dts-qcom-ipq6018-assign-QDSS_AT-clock-to-wifi-.patch b/target/linux/qualcommax/patches-6.6/0909-arm64-dts-qcom-ipq6018-assign-QDSS_AT-clock-to-wifi-.patch index 0a7a100f6ac8..3e0ac68f2b20 100644 --- a/target/linux/qualcommax/patches-6.6/0909-arm64-dts-qcom-ipq6018-assign-QDSS_AT-clock-to-wifi-.patch +++ b/target/linux/qualcommax/patches-6.6/0909-arm64-dts-qcom-ipq6018-assign-QDSS_AT-clock-to-wifi-.patch @@ -13,7 +13,7 @@ Signed-off-by: Mantas Pucka --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -928,8 +928,8 @@ +@@ -929,8 +929,8 @@ "wcss_reset", "wcss_q6_reset"; diff --git a/target/linux/qualcommax/patches-6.6/0910-arm64-dts-qcom-ipq6018-change-voltage-to-perf-levels.patch b/target/linux/qualcommax/patches-6.6/0910-arm64-dts-qcom-ipq6018-change-voltage-to-perf-levels.patch index 17784235c352..25fa3136709b 100644 --- a/target/linux/qualcommax/patches-6.6/0910-arm64-dts-qcom-ipq6018-change-voltage-to-perf-levels.patch +++ b/target/linux/qualcommax/patches-6.6/0910-arm64-dts-qcom-ipq6018-change-voltage-to-perf-levels.patch @@ -14,7 +14,7 @@ Signed-off-by: Mantas Pucka --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi -@@ -106,42 +106,42 @@ +@@ -107,42 +107,42 @@ opp-864000000 { opp-hz = /bits/ 64 <864000000>; -- 2.30.2