From d91940818d81ca1761de855c17f3528b3ec7eabe Mon Sep 17 00:00:00 2001 From: "Mintz, Yuval" Date: Sun, 19 Mar 2017 13:08:14 +0200 Subject: [PATCH] qed: Set HW-channel to ready before ACKing VF When PF responds to the VF requests it also cleans the HW-channel indication in firmware to allow further VF messages to arrive, but the order currently applied is wrong - The PF is copying by DMAE the response the VF is polling on for completion, and only afterwards sets the HW-channel to ready state. This creates a race condition where the VF would be able to send an additional message to the PF before the channel would get ready again, causing the firmware to consider the VF as malicious. Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- drivers/net/ethernet/qlogic/qed/qed_sriov.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/qlogic/qed/qed_sriov.c b/drivers/net/ethernet/qlogic/qed/qed_sriov.c index 2403d58d9d11..aea1e4c45ead 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c +++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c @@ -1136,13 +1136,17 @@ static void qed_iov_send_response(struct qed_hwfn *p_hwfn, (sizeof(union pfvf_tlvs) - sizeof(u64)) / 4, ¶ms); - qed_dmae_host2host(p_hwfn, p_ptt, mbx->reply_phys, - mbx->req_virt->first_tlv.reply_address, - sizeof(u64) / 4, ¶ms); - + /* Once PF copies the rc to the VF, the latter can continue + * and send an additional message. So we have to make sure the + * channel would be re-set to ready prior to that. + */ REG_WR(p_hwfn, GTT_BAR0_MAP_REG_USDM_RAM + USTORM_VF_PF_CHANNEL_READY_OFFSET(eng_vf_id), 1); + + qed_dmae_host2host(p_hwfn, p_ptt, mbx->reply_phys, + mbx->req_virt->first_tlv.reply_address, + sizeof(u64) / 4, ¶ms); } static u16 qed_iov_vport_to_tlv(struct qed_hwfn *p_hwfn, -- 2.30.2