From d8fe6009aa3ecbeeab3a4ec1a8bce68959a885be Mon Sep 17 00:00:00 2001 From: Martin Blumenstingl Date: Sat, 9 Feb 2019 01:18:13 +0100 Subject: [PATCH] rtc: support for the Amlogic Meson RTC Add support for the RTC block on the 32-bit Amlogic Meson6, Meson8, Meson8b and Meson8m2 SoCs. The RTC is split in to two parts, which are both managed by this driver: - the AHB front end - and a simple serial connection to the actual registers The RTC_COUNTER register which holds the time is 32-bits wide. There are four 32-bit wide (in total: 16 bytes) "regmem" registers which are exposed using nvmem. On Amlogic's 3.10 kernel this is used to store data which needs to survive a suspend / resume cycle. Signed-off-by: Ben Dooks [resurrected Ben's patches after 2 years] Signed-off-by: Martin Blumenstingl Signed-off-by: Alexandre Belloni --- drivers/rtc/Kconfig | 11 ++ drivers/rtc/Makefile | 1 + drivers/rtc/rtc-meson.c | 410 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 422 insertions(+) create mode 100644 drivers/rtc/rtc-meson.c diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 8f6735e0ff14..7d61bb382cf3 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -1294,6 +1294,17 @@ config RTC_DRV_IMXDI This driver can also be built as a module, if so, the module will be called "rtc-imxdi". +config RTC_DRV_MESON + tristate "Amlogic Meson RTC" + depends on (ARM && ARCH_MESON) || COMPILE_TEST + select REGMAP_MMIO + help + Support for the RTC block on the Amlogic Meson6, Meson8, Meson8b + and Meson8m2 SoCs. + + This driver can also be built as a module, if so, the module + will be called "rtc-meson". + config RTC_DRV_OMAP tristate "TI OMAP Real Time Clock" depends on ARCH_OMAP || ARCH_DAVINCI || COMPILE_TEST diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index faca02109aaa..b994323942bd 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -101,6 +101,7 @@ obj-$(CONFIG_RTC_DRV_MAX8997) += rtc-max8997.o obj-$(CONFIG_RTC_DRV_MAX8998) += rtc-max8998.o obj-$(CONFIG_RTC_DRV_MC13XXX) += rtc-mc13xxx.o obj-$(CONFIG_RTC_DRV_MCP795) += rtc-mcp795.o +obj-$(CONFIG_RTC_DRV_MESON) += rtc-meson.o obj-$(CONFIG_RTC_DRV_MOXART) += rtc-moxart.o obj-$(CONFIG_RTC_DRV_MPC5121) += rtc-mpc5121.o obj-$(CONFIG_RTC_DRV_MSM6242) += rtc-msm6242.o diff --git a/drivers/rtc/rtc-meson.c b/drivers/rtc/rtc-meson.c new file mode 100644 index 000000000000..6fc4b09e7ebd --- /dev/null +++ b/drivers/rtc/rtc-meson.c @@ -0,0 +1,410 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * RTC driver for the interal RTC block in the Amlogic Meson6, Meson8, + * Meson8b and Meson8m2 SoCs. + * + * The RTC is split in to two parts, the AHB front end and a simple serial + * connection to the actual registers. This driver manages both parts. + * + * Copyright (c) 2018 Martin Blumenstingl + * Copyright (c) 2015 Ben Dooks for Codethink Ltd + * Based on origin by Carlo Caione + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* registers accessed from cpu bus */ +#define RTC_ADDR0 0x00 + #define RTC_ADDR0_LINE_SCLK BIT(0) + #define RTC_ADDR0_LINE_SEN BIT(1) + #define RTC_ADDR0_LINE_SDI BIT(2) + #define RTC_ADDR0_START_SER BIT(17) + #define RTC_ADDR0_WAIT_SER BIT(22) + #define RTC_ADDR0_DATA GENMASK(31, 24) + +#define RTC_ADDR1 0x04 + #define RTC_ADDR1_SDO BIT(0) + #define RTC_ADDR1_S_READY BIT(1) + +#define RTC_ADDR2 0x08 +#define RTC_ADDR3 0x0c + +#define RTC_REG4 0x10 + #define RTC_REG4_STATIC_VALUE GENMASK(7, 0) + +/* rtc registers accessed via rtc-serial interface */ +#define RTC_COUNTER (0) +#define RTC_SEC_ADJ (2) +#define RTC_REGMEM_0 (4) +#define RTC_REGMEM_1 (5) +#define RTC_REGMEM_2 (6) +#define RTC_REGMEM_3 (7) + +#define RTC_ADDR_BITS (3) /* number of address bits to send */ +#define RTC_DATA_BITS (32) /* number of data bits to tx/rx */ + +#define MESON_STATIC_BIAS_CUR (0x5 << 1) +#define MESON_STATIC_VOLTAGE (0x3 << 11) +#define MESON_STATIC_DEFAULT (MESON_STATIC_BIAS_CUR | MESON_STATIC_VOLTAGE) + +struct meson_rtc { + struct rtc_device *rtc; /* rtc device we created */ + struct device *dev; /* device we bound from */ + struct reset_control *reset; /* reset source */ + struct regulator *vdd; /* voltage input */ + struct regmap *peripheral; /* peripheral registers */ + struct regmap *serial; /* serial registers */ +}; + +static const struct regmap_config meson_rtc_peripheral_regmap_config = { + .name = "peripheral-registers", + .reg_bits = 8, + .val_bits = 32, + .reg_stride = 4, + .max_register = RTC_REG4, + .fast_io = true, +}; + +/* RTC front-end serialiser controls */ + +static void meson_rtc_sclk_pulse(struct meson_rtc *rtc) +{ + udelay(5); + regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SCLK, 0); + udelay(5); + regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SCLK, + RTC_ADDR0_LINE_SCLK); +} + +static void meson_rtc_send_bit(struct meson_rtc *rtc, unsigned int bit) +{ + regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SDI, + bit ? RTC_ADDR0_LINE_SDI : 0); + meson_rtc_sclk_pulse(rtc); +} + +static void meson_rtc_send_bits(struct meson_rtc *rtc, u32 data, + unsigned int nr) +{ + u32 bit = 1 << (nr - 1); + + while (bit) { + meson_rtc_send_bit(rtc, data & bit); + bit >>= 1; + } +} + +static void meson_rtc_set_dir(struct meson_rtc *rtc, u32 mode) +{ + regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SEN, 0); + regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SDI, 0); + meson_rtc_send_bit(rtc, mode); + regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SDI, 0); +} + +static u32 meson_rtc_get_data(struct meson_rtc *rtc) +{ + u32 tmp, val = 0; + int bit; + + for (bit = 0; bit < RTC_DATA_BITS; bit++) { + meson_rtc_sclk_pulse(rtc); + val <<= 1; + + regmap_read(rtc->peripheral, RTC_ADDR1, &tmp); + val |= tmp & RTC_ADDR1_SDO; + } + + return val; +} + +static int meson_rtc_get_bus(struct meson_rtc *rtc) +{ + int ret, retries = 3; + u32 val; + + /* prepare bus for transfers, set all lines low */ + val = RTC_ADDR0_LINE_SDI | RTC_ADDR0_LINE_SEN | RTC_ADDR0_LINE_SCLK; + regmap_update_bits(rtc->peripheral, RTC_ADDR0, val, 0); + + for (retries = 0; retries < 3; retries++) { + /* wait for the bus to be ready */ + if (!regmap_read_poll_timeout(rtc->peripheral, RTC_ADDR1, val, + val & RTC_ADDR1_S_READY, 10, + 10000)) + return 0; + + dev_warn(rtc->dev, "failed to get bus, resetting RTC\n"); + + ret = reset_control_reset(rtc->reset); + if (ret) + return ret; + } + + dev_err(rtc->dev, "bus is not ready\n"); + return -ETIMEDOUT; +} + +static int meson_rtc_serial_bus_reg_read(void *context, unsigned int reg, + unsigned int *data) +{ + struct meson_rtc *rtc = context; + int ret; + + ret = meson_rtc_get_bus(rtc); + if (ret) + return ret; + + regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SEN, + RTC_ADDR0_LINE_SEN); + meson_rtc_send_bits(rtc, reg, RTC_ADDR_BITS); + meson_rtc_set_dir(rtc, 0); + *data = meson_rtc_get_data(rtc); + + return 0; +} + +static int meson_rtc_serial_bus_reg_write(void *context, unsigned int reg, + unsigned int data) +{ + struct meson_rtc *rtc = context; + int ret; + + ret = meson_rtc_get_bus(rtc); + if (ret) + return ret; + + regmap_update_bits(rtc->peripheral, RTC_ADDR0, RTC_ADDR0_LINE_SEN, + RTC_ADDR0_LINE_SEN); + meson_rtc_send_bits(rtc, data, RTC_DATA_BITS); + meson_rtc_send_bits(rtc, reg, RTC_ADDR_BITS); + meson_rtc_set_dir(rtc, 1); + + return 0; +} + +static const struct regmap_bus meson_rtc_serial_bus = { + .reg_read = meson_rtc_serial_bus_reg_read, + .reg_write = meson_rtc_serial_bus_reg_write, +}; + +static const struct regmap_config meson_rtc_serial_regmap_config = { + .name = "serial-registers", + .reg_bits = 4, + .reg_stride = 1, + .val_bits = 32, + .max_register = RTC_REGMEM_3, + .fast_io = false, +}; + +static int meson_rtc_write_static(struct meson_rtc *rtc, u32 data) +{ + u32 tmp; + + regmap_write(rtc->peripheral, RTC_REG4, + FIELD_PREP(RTC_REG4_STATIC_VALUE, (data >> 8))); + + /* write the static value and start the auto serializer */ + tmp = FIELD_PREP(RTC_ADDR0_DATA, (data & 0xff)) | RTC_ADDR0_START_SER; + regmap_update_bits(rtc->peripheral, RTC_ADDR0, + RTC_ADDR0_DATA | RTC_ADDR0_START_SER, tmp); + + /* wait for the auto serializer to complete */ + return regmap_read_poll_timeout(rtc->peripheral, RTC_REG4, tmp, + !(tmp & RTC_ADDR0_WAIT_SER), 10, + 10000); +} + +/* RTC interface layer functions */ + +static int meson_rtc_gettime(struct device *dev, struct rtc_time *tm) +{ + struct meson_rtc *rtc = dev_get_drvdata(dev); + u32 time; + int ret; + + ret = regmap_read(rtc->serial, RTC_COUNTER, &time); + if (!ret) + rtc_time64_to_tm(time, tm); + + return ret; +} + +static int meson_rtc_settime(struct device *dev, struct rtc_time *tm) +{ + struct meson_rtc *rtc = dev_get_drvdata(dev); + + return regmap_write(rtc->serial, RTC_COUNTER, rtc_tm_to_time64(tm)); +} + +static const struct rtc_class_ops meson_rtc_ops = { + .read_time = meson_rtc_gettime, + .set_time = meson_rtc_settime, +}; + +/* NVMEM interface layer functions */ + +static int meson_rtc_regmem_read(void *context, unsigned int offset, + void *buf, size_t bytes) +{ + struct meson_rtc *rtc = context; + unsigned int read_offset, read_size; + + read_offset = RTC_REGMEM_0 + (offset / 4); + read_size = bytes / 4; + + return regmap_bulk_read(rtc->serial, read_offset, buf, read_size); +} + +static int meson_rtc_regmem_write(void *context, unsigned int offset, + void *buf, size_t bytes) +{ + struct meson_rtc *rtc = context; + unsigned int write_offset, write_size; + + write_offset = RTC_REGMEM_0 + (offset / 4); + write_size = bytes / 4; + + return regmap_bulk_write(rtc->serial, write_offset, buf, write_size); +} + +static int meson_rtc_probe(struct platform_device *pdev) +{ + struct nvmem_config meson_rtc_nvmem_config = { + .name = "meson-rtc-regmem", + .type = NVMEM_TYPE_BATTERY_BACKED, + .word_size = 4, + .stride = 4, + .size = 4 * 4, + .reg_read = meson_rtc_regmem_read, + .reg_write = meson_rtc_regmem_write, + }; + struct device *dev = &pdev->dev; + struct meson_rtc *rtc; + struct resource *res; + void __iomem *base; + int ret; + u32 tm; + + rtc = devm_kzalloc(dev, sizeof(struct meson_rtc), GFP_KERNEL); + if (!rtc) + return -ENOMEM; + + rtc->rtc = devm_rtc_allocate_device(dev); + if (IS_ERR(rtc->rtc)) + return PTR_ERR(rtc->rtc); + + platform_set_drvdata(pdev, rtc); + + rtc->dev = dev; + + rtc->rtc->ops = &meson_rtc_ops; + rtc->rtc->range_max = U32_MAX; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + rtc->peripheral = devm_regmap_init_mmio(dev, base, + &meson_rtc_peripheral_regmap_config); + if (IS_ERR(rtc->peripheral)) { + dev_err(dev, "failed to create peripheral regmap\n"); + return PTR_ERR(rtc->peripheral); + } + + rtc->reset = devm_reset_control_get(dev, NULL); + if (IS_ERR(rtc->reset)) { + dev_err(dev, "missing reset line\n"); + return PTR_ERR(rtc->reset); + } + + rtc->vdd = devm_regulator_get(dev, "vdd"); + if (IS_ERR(rtc->vdd)) { + dev_err(dev, "failed to get the vdd-supply\n"); + return PTR_ERR(rtc->vdd); + } + + ret = regulator_enable(rtc->vdd); + if (ret) { + dev_err(dev, "failed to enable vdd-supply\n"); + return ret; + } + + ret = meson_rtc_write_static(rtc, MESON_STATIC_DEFAULT); + if (ret) { + dev_err(dev, "failed to set static values\n"); + goto out_disable_vdd; + } + + rtc->serial = devm_regmap_init(dev, &meson_rtc_serial_bus, rtc, + &meson_rtc_serial_regmap_config); + if (IS_ERR(rtc->serial)) { + dev_err(dev, "failed to create serial regmap\n"); + ret = PTR_ERR(rtc->serial); + goto out_disable_vdd; + } + + /* + * check if we can read RTC counter, if not then the RTC is probably + * not functional. If it isn't probably best to not bind. + */ + ret = regmap_read(rtc->serial, RTC_COUNTER, &tm); + if (ret) { + dev_err(dev, "cannot read RTC counter, RTC not functional\n"); + goto out_disable_vdd; + } + + meson_rtc_nvmem_config.priv = rtc; + ret = rtc_nvmem_register(rtc->rtc, &meson_rtc_nvmem_config); + if (ret) + goto out_disable_vdd; + + ret = rtc_register_device(rtc->rtc); + if (ret) + goto out_unregister_nvmem; + + return 0; + +out_unregister_nvmem: + rtc_nvmem_unregister(rtc->rtc); + +out_disable_vdd: + regulator_disable(rtc->vdd); + return ret; +} + +static const struct of_device_id meson_rtc_dt_match[] = { + { .compatible = "amlogic,meson6-rtc", }, + { .compatible = "amlogic,meson8-rtc", }, + { .compatible = "amlogic,meson8b-rtc", }, + { .compatible = "amlogic,meson8m2-rtc", }, + { }, +}; +MODULE_DEVICE_TABLE(of, meson_rtc_dt_match); + +static struct platform_driver meson_rtc_driver = { + .probe = meson_rtc_probe, + .driver = { + .name = "meson-rtc", + .of_match_table = of_match_ptr(meson_rtc_dt_match), + }, +}; +module_platform_driver(meson_rtc_driver); + +MODULE_DESCRIPTION("Amlogic Meson RTC Driver"); +MODULE_AUTHOR("Ben Dooks "); +MODULE_AUTHOR("Martin Blumenstingl "); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:meson-rtc"); -- 2.30.2