From d8a944582da1a4d29a1487ff7f435643505a12a0 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Tue, 8 Dec 2009 16:21:29 -0700 Subject: [PATCH] OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx* The OMAP2 clock code currently #includes a large .h file full of static data structures. Instead, define the data in a .c file. Russell King proposed this new arrangement: http://marc.info/?l=linux-omap&m=125967425908895&w=2 This patch also deals with most of the flagrant checkpatch violations. While here, separate the prcm_config data structures out into their own files, opp2xxx.h and opp24{2,3}0_data.c, and only build in the OPP tables for the target device. This should save some memory. In the long run, these prcm_config tables should be replaced with OPP code. Signed-off-by: Paul Walmsley Cc: Russell King Cc: Richard Woodruff Cc: Nishanth Menon --- arch/arm/mach-omap2/Makefile | 6 +- arch/arm/mach-omap2/clock.h | 30 +- .../mach-omap2/{clock24xx.c => clock2xxx.c} | 331 ++----- arch/arm/mach-omap2/clock2xxx.h | 41 + .../{clock24xx.h => clock2xxx_data.c} | 832 +++++------------- arch/arm/mach-omap2/opp2420_data.c | 126 +++ arch/arm/mach-omap2/opp2430_data.c | 133 +++ arch/arm/mach-omap2/opp2xxx.h | 424 +++++++++ arch/arm/mach-omap2/sdrc.h | 3 + arch/arm/plat-omap/include/plat/clock.h | 2 + 10 files changed, 1044 insertions(+), 884 deletions(-) rename arch/arm/mach-omap2/{clock24xx.c => clock2xxx.c} (51%) create mode 100644 arch/arm/mach-omap2/clock2xxx.h rename arch/arm/mach-omap2/{clock24xx.h => clock2xxx_data.c} (73%) create mode 100644 arch/arm/mach-omap2/opp2420_data.c create mode 100644 arch/arm/mach-omap2/opp2430_data.c create mode 100644 arch/arm/mach-omap2/opp2xxx.h diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index cc56accee3ef..610da0515e1f 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -7,7 +7,7 @@ obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o omap-2-3-common = irq.o sdrc.o omap_hwmod.o prcm-common = prcm.o powerdomain.o -clock-common = clock.o clockdomain.o +clock-common = clock.o clock_common_data.o clockdomain.o obj-$(CONFIG_ARCH_OMAP2) += $(omap-2-3-common) $(prcm-common) $(clock-common) obj-$(CONFIG_ARCH_OMAP3) += $(omap-2-3-common) $(prcm-common) $(clock-common) @@ -41,8 +41,10 @@ obj-$(CONFIG_ARCH_OMAP3) += cm.o obj-$(CONFIG_ARCH_OMAP4) += cm4xxx.o # Clock framework -obj-$(CONFIG_ARCH_OMAP2) += clock24xx.o +obj-$(CONFIG_ARCH_OMAP2) += clock2xxx.o clock2xxx_data.o +obj-$(CONFIG_ARCH_OMAP2420) += opp2420_data.o obj-$(CONFIG_ARCH_OMAP3) += clock34xx.o clock34xx_data.o +obj-$(CONFIG_ARCH_OMAP2430) += opp2430_data.o # EMU peripherals obj-$(CONFIG_OMAP3_EMU) += emu.o diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index b1991e39961a..87c08056b303 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -1,8 +1,8 @@ /* * linux/arch/arm/mach-omap2/clock.h * - * Copyright (C) 2005-2008 Texas Instruments, Inc. - * Copyright (C) 2004-2008 Nokia Corporation + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation * * Contacts: * Richard Woodruff @@ -72,31 +72,17 @@ void omap2_clk_dflt_find_companion(struct clk *clk, void __iomem **other_reg, void omap2_clk_dflt_find_idlest(struct clk *clk, void __iomem **idlest_reg, u8 *idlest_bit); +extern u8 cpu_mask; + extern const struct clkops clkops_omap2_dflt_wait; extern const struct clkops clkops_omap2_dflt; -extern u8 cpu_mask; - extern struct clk_functions omap2_clk_functions; +extern struct clk *vclk, *sclk; -/* clksel_rate data common to 24xx/343x */ -static const struct clksel_rate gpt_32k_rates[] = { - { .div = 1, .val = 0, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate gpt_sys_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, - { .div = 0 } -}; - -static const struct clksel_rate gfx_l3_rates[] = { - { .div = 1, .val = 1, .flags = RATE_IN_24XX | RATE_IN_343X }, - { .div = 2, .val = 2, .flags = RATE_IN_24XX | RATE_IN_343X | DEFAULT_RATE }, - { .div = 3, .val = 3, .flags = RATE_IN_243X | RATE_IN_343X }, - { .div = 4, .val = 4, .flags = RATE_IN_243X | RATE_IN_343X }, - { .div = 0 } -}; +extern const struct clksel_rate gpt_32k_rates[]; +extern const struct clksel_rate gpt_sys_rates[]; +extern const struct clksel_rate gfx_l3_rates[]; #endif diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock2xxx.c similarity index 51% rename from arch/arm/mach-omap2/clock24xx.c rename to arch/arm/mach-omap2/clock2xxx.c index a4221741808e..d0e3fb7f9298 100644 --- a/arch/arm/mach-omap2/clock24xx.c +++ b/arch/arm/mach-omap2/clock2xxx.c @@ -37,183 +37,13 @@ #include #include "clock.h" +#include "clock2xxx.h" +#include "opp2xxx.h" #include "prm.h" #include "prm-regbits-24xx.h" #include "cm.h" #include "cm-regbits-24xx.h" -static const struct clkops clkops_oscck; -static const struct clkops clkops_apll96; -static const struct clkops clkops_apll54; - -static void omap2430_clk_i2chs_find_idlest(struct clk *clk, - void __iomem **idlest_reg, - u8 *idlest_bit); - -/* 2430 I2CHS has non-standard IDLEST register */ -static const struct clkops clkops_omap2430_i2chs_wait = { - .enable = omap2_dflt_clk_enable, - .disable = omap2_dflt_clk_disable, - .find_idlest = omap2430_clk_i2chs_find_idlest, - .find_companion = omap2_clk_dflt_find_companion, -}; - -#include "clock24xx.h" - -static struct omap_clk omap24xx_clks[] = { - /* external root sources */ - CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X), - CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X), - CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X), - CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X), - CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X), - /* internal analog sources */ - CLK(NULL, "dpll_ck", &dpll_ck, CK_243X | CK_242X), - CLK(NULL, "apll96_ck", &apll96_ck, CK_243X | CK_242X), - CLK(NULL, "apll54_ck", &apll54_ck, CK_243X | CK_242X), - /* internal prcm root sources */ - CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X | CK_242X), - CLK(NULL, "core_ck", &core_ck, CK_243X | CK_242X), - CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X | CK_242X), - CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X | CK_242X), - CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X | CK_242X), - CLK(NULL, "ck_wdt1_osc", &wdt1_osc_ck, CK_243X | CK_242X), - CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X), - CLK(NULL, "sys_clkout", &sys_clkout, CK_243X | CK_242X), - CLK(NULL, "sys_clkout2_src", &sys_clkout2_src, CK_242X), - CLK(NULL, "sys_clkout2", &sys_clkout2, CK_242X), - CLK(NULL, "emul_ck", &emul_ck, CK_242X), - /* mpu domain clocks */ - CLK(NULL, "mpu_ck", &mpu_ck, CK_243X | CK_242X), - /* dsp domain clocks */ - CLK(NULL, "dsp_fck", &dsp_fck, CK_243X | CK_242X), - CLK(NULL, "dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X), - CLK(NULL, "dsp_ick", &dsp_ick, CK_242X), - CLK(NULL, "iva2_1_ick", &iva2_1_ick, CK_243X), - CLK(NULL, "iva1_ifck", &iva1_ifck, CK_242X), - CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X), - /* GFX domain clocks */ - CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_243X | CK_242X), - CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_243X | CK_242X), - CLK(NULL, "gfx_ick", &gfx_ick, CK_243X | CK_242X), - /* Modem domain clocks */ - CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), - CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), - /* DSS domain clocks */ - CLK("omapdss", "ick", &dss_ick, CK_243X | CK_242X), - CLK("omapdss", "dss1_fck", &dss1_fck, CK_243X | CK_242X), - CLK("omapdss", "dss2_fck", &dss2_fck, CK_243X | CK_242X), - CLK("omapdss", "tv_fck", &dss_54m_fck, CK_243X | CK_242X), - /* L3 domain clocks */ - CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X), - CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X), - CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_243X | CK_242X), - /* L4 domain clocks */ - CLK(NULL, "l4_ck", &l4_ck, CK_243X | CK_242X), - CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X | CK_242X), - /* virtual meta-group clock */ - CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X), - /* general l4 interface ck, multi-parent functional clk */ - CLK(NULL, "gpt1_ick", &gpt1_ick, CK_243X | CK_242X), - CLK(NULL, "gpt1_fck", &gpt1_fck, CK_243X | CK_242X), - CLK(NULL, "gpt2_ick", &gpt2_ick, CK_243X | CK_242X), - CLK(NULL, "gpt2_fck", &gpt2_fck, CK_243X | CK_242X), - CLK(NULL, "gpt3_ick", &gpt3_ick, CK_243X | CK_242X), - CLK(NULL, "gpt3_fck", &gpt3_fck, CK_243X | CK_242X), - CLK(NULL, "gpt4_ick", &gpt4_ick, CK_243X | CK_242X), - CLK(NULL, "gpt4_fck", &gpt4_fck, CK_243X | CK_242X), - CLK(NULL, "gpt5_ick", &gpt5_ick, CK_243X | CK_242X), - CLK(NULL, "gpt5_fck", &gpt5_fck, CK_243X | CK_242X), - CLK(NULL, "gpt6_ick", &gpt6_ick, CK_243X | CK_242X), - CLK(NULL, "gpt6_fck", &gpt6_fck, CK_243X | CK_242X), - CLK(NULL, "gpt7_ick", &gpt7_ick, CK_243X | CK_242X), - CLK(NULL, "gpt7_fck", &gpt7_fck, CK_243X | CK_242X), - CLK(NULL, "gpt8_ick", &gpt8_ick, CK_243X | CK_242X), - CLK(NULL, "gpt8_fck", &gpt8_fck, CK_243X | CK_242X), - CLK(NULL, "gpt9_ick", &gpt9_ick, CK_243X | CK_242X), - CLK(NULL, "gpt9_fck", &gpt9_fck, CK_243X | CK_242X), - CLK(NULL, "gpt10_ick", &gpt10_ick, CK_243X | CK_242X), - CLK(NULL, "gpt10_fck", &gpt10_fck, CK_243X | CK_242X), - CLK(NULL, "gpt11_ick", &gpt11_ick, CK_243X | CK_242X), - CLK(NULL, "gpt11_fck", &gpt11_fck, CK_243X | CK_242X), - CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X | CK_242X), - CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X | CK_242X), - CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X | CK_242X), - CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_243X | CK_242X), - CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X | CK_242X), - CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_243X | CK_242X), - CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X), - CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_243X), - CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X), - CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_243X), - CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X), - CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_243X), - CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X | CK_242X), - CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_243X | CK_242X), - CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X | CK_242X), - CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_243X | CK_242X), - CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X), - CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_243X), - CLK(NULL, "uart1_ick", &uart1_ick, CK_243X | CK_242X), - CLK(NULL, "uart1_fck", &uart1_fck, CK_243X | CK_242X), - CLK(NULL, "uart2_ick", &uart2_ick, CK_243X | CK_242X), - CLK(NULL, "uart2_fck", &uart2_fck, CK_243X | CK_242X), - CLK(NULL, "uart3_ick", &uart3_ick, CK_243X | CK_242X), - CLK(NULL, "uart3_fck", &uart3_fck, CK_243X | CK_242X), - CLK(NULL, "gpios_ick", &gpios_ick, CK_243X | CK_242X), - CLK(NULL, "gpios_fck", &gpios_fck, CK_243X | CK_242X), - CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X | CK_242X), - CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_243X | CK_242X), - CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X | CK_242X), - CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X | CK_242X), - CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X | CK_242X), - CLK(NULL, "icr_ick", &icr_ick, CK_243X), - CLK("omap24xxcam", "fck", &cam_fck, CK_243X | CK_242X), - CLK("omap24xxcam", "ick", &cam_ick, CK_243X | CK_242X), - CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X | CK_242X), - CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X | CK_242X), - CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X | CK_242X), - CLK(NULL, "wdt3_ick", &wdt3_ick, CK_242X), - CLK(NULL, "wdt3_fck", &wdt3_fck, CK_242X), - CLK(NULL, "mspro_ick", &mspro_ick, CK_243X | CK_242X), - CLK(NULL, "mspro_fck", &mspro_fck, CK_243X | CK_242X), - CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X), - CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X), - CLK(NULL, "fac_ick", &fac_ick, CK_243X | CK_242X), - CLK(NULL, "fac_fck", &fac_fck, CK_243X | CK_242X), - CLK(NULL, "eac_ick", &eac_ick, CK_242X), - CLK(NULL, "eac_fck", &eac_fck, CK_242X), - CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X | CK_242X), - CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X | CK_242X), - CLK("i2c_omap.1", "ick", &i2c1_ick, CK_243X | CK_242X), - CLK("i2c_omap.1", "fck", &i2c1_fck, CK_242X), - CLK("i2c_omap.1", "fck", &i2chs1_fck, CK_243X), - CLK("i2c_omap.2", "ick", &i2c2_ick, CK_243X | CK_242X), - CLK("i2c_omap.2", "fck", &i2c2_fck, CK_242X), - CLK("i2c_omap.2", "fck", &i2chs2_fck, CK_243X), - CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X | CK_242X), - CLK(NULL, "sdma_fck", &sdma_fck, CK_243X | CK_242X), - CLK(NULL, "sdma_ick", &sdma_ick, CK_243X | CK_242X), - CLK(NULL, "vlynq_ick", &vlynq_ick, CK_242X), - CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X), - CLK(NULL, "sdrc_ick", &sdrc_ick, CK_243X), - CLK(NULL, "des_ick", &des_ick, CK_243X | CK_242X), - CLK(NULL, "sha_ick", &sha_ick, CK_243X | CK_242X), - CLK("omap_rng", "ick", &rng_ick, CK_243X | CK_242X), - CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X), - CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X), - CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X), - CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X), - CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X), - CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X), - CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X), - CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_243X), - CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X), - CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X), - CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X), - CLK("mmci-omap-hs.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X), - CLK("mmci-omap-hs.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X), -}; /* CM_CLKEN_PLL.EN_{54,96}M_PLL options (24XX) */ #define EN_APLL_STOPPED 0 @@ -226,11 +56,12 @@ static struct omap_clk omap24xx_clks[] = { /* #define DOWN_VARIABLE_DPLL 1 */ /* Experimental */ -static struct prcm_config *curr_prcm_set; -static struct clk *vclk; -static struct clk *sclk; +const struct prcm_config *curr_prcm_set; +const struct prcm_config *rate_table; + +struct clk *vclk, *sclk, *dclk; -static void __iomem *prcm_clksrc_ctrl; +void __iomem *prcm_clksrc_ctrl; /*------------------------------------------------------------------------- * Omap24xx specific clock functions @@ -255,6 +86,13 @@ static void omap2430_clk_i2chs_find_idlest(struct clk *clk, *idlest_bit = clk->enable_bit; } +/* 2430 I2CHS has non-standard IDLEST register */ +const struct clkops clkops_omap2430_i2chs_wait = { + .enable = omap2_dflt_clk_enable, + .disable = omap2_dflt_clk_disable, + .find_idlest = omap2430_clk_i2chs_find_idlest, + .find_companion = omap2_clk_dflt_find_companion, +}; /** * omap2xxx_clk_get_core_rate - return the CORE_CLK rate @@ -266,7 +104,7 @@ static void omap2430_clk_i2chs_find_idlest(struct clk *clk, * struct clk *dpll_ck, which is a composite clock of dpll_ck and * core_ck. */ -static unsigned long omap2xxx_clk_get_core_rate(struct clk *clk) +unsigned long omap2xxx_clk_get_core_rate(struct clk *clk) { long long core_clk; u32 v; @@ -304,14 +142,14 @@ static void omap2_disable_osc_ck(struct clk *clk) __raw_writel(pcc | OMAP_AUTOEXTCLKMODE_MASK, prcm_clksrc_ctrl); } -static const struct clkops clkops_oscck = { - .enable = &omap2_enable_osc_ck, - .disable = &omap2_disable_osc_ck, +const struct clkops clkops_oscck = { + .enable = omap2_enable_osc_ck, + .disable = omap2_disable_osc_ck, }; #ifdef OLD_CK /* Recalculate SYST_CLK */ -static void omap2_sys_clk_recalc(struct clk * clk) +static void omap2_sys_clk_recalc(struct clk *clk) { u32 div = PRCM_CLKSRC_CTRL; div &= (1 << 7) | (1 << 6); /* Test if ext clk divided by 1 or 2 */ @@ -367,21 +205,21 @@ static void omap2_clk_apll_disable(struct clk *clk) cm_write_mod_reg(cval, PLL_MOD, CM_CLKEN); } -static const struct clkops clkops_apll96 = { - .enable = &omap2_clk_apll96_enable, - .disable = &omap2_clk_apll_disable, +const struct clkops clkops_apll96 = { + .enable = omap2_clk_apll96_enable, + .disable = omap2_clk_apll_disable, }; -static const struct clkops clkops_apll54 = { - .enable = &omap2_clk_apll54_enable, - .disable = &omap2_clk_apll_disable, +const struct clkops clkops_apll54 = { + .enable = omap2_clk_apll54_enable, + .disable = omap2_clk_apll_disable, }; /* * Uses the current prcm set to tell if a rate is valid. * You can go slower, but not faster within a given rate set. */ -static long omap2_dpllcore_round_rate(unsigned long target_rate) +long omap2_dpllcore_round_rate(unsigned long target_rate) { u32 high, low, core_clk_src; @@ -410,19 +248,19 @@ static long omap2_dpllcore_round_rate(unsigned long target_rate) } -static unsigned long omap2_dpllcore_recalc(struct clk *clk) +unsigned long omap2_dpllcore_recalc(struct clk *clk) { return omap2xxx_clk_get_core_rate(clk); } -static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) +int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) { u32 cur_rate, low, mult, div, valid_rate, done_rate; u32 bypass = 0; struct prcm_config tmpset; const struct dpll_data *dd; - cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck); + cur_rate = omap2xxx_clk_get_core_rate(dclk); mult = cm_read_mod_reg(PLL_MOD, CM_CLKSEL2); mult &= OMAP24XX_CORE_CLK_SRC_MASK; @@ -489,7 +327,7 @@ static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate) * * Set virt_prcm_set's rate to the mpu_speed field of the current PRCM set. */ -static unsigned long omap2_table_mpu_recalc(struct clk *clk) +unsigned long omap2_table_mpu_recalc(struct clk *clk) { return curr_prcm_set->mpu_speed; } @@ -501,17 +339,20 @@ static unsigned long omap2_table_mpu_recalc(struct clk *clk) * Some might argue L3-DDR, others ARM, others IVA. This code is simple and * just uses the ARM rates. */ -static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate) +long omap2_round_to_table_rate(struct clk *clk, unsigned long rate) { - struct prcm_config *ptr; + const struct prcm_config *ptr; long highest_rate; + long sys_ck_rate; + + sys_ck_rate = clk_get_rate(sclk); highest_rate = -EINVAL; for (ptr = rate_table; ptr->mpu_speed; ptr++) { if (!(ptr->flags & cpu_mask)) continue; - if (ptr->xtal_speed != sys_ck.rate) + if (ptr->xtal_speed != sys_ck_rate) continue; highest_rate = ptr->mpu_speed; @@ -524,18 +365,21 @@ static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate) } /* Sets basic clocks based on the specified rate */ -static int omap2_select_table_rate(struct clk *clk, unsigned long rate) +int omap2_select_table_rate(struct clk *clk, unsigned long rate) { u32 cur_rate, done_rate, bypass = 0, tmp; - struct prcm_config *prcm; + const struct prcm_config *prcm; unsigned long found_speed = 0; unsigned long flags; + long sys_ck_rate; + + sys_ck_rate = clk_get_rate(sclk); for (prcm = rate_table; prcm->mpu_speed; prcm++) { if (!(prcm->flags & cpu_mask)) continue; - if (prcm->xtal_speed != sys_ck.rate) + if (prcm->xtal_speed != sys_ck_rate) continue; if (prcm->mpu_speed <= rate) { @@ -551,7 +395,7 @@ static int omap2_select_table_rate(struct clk *clk, unsigned long rate) } curr_prcm_set = prcm; - cur_rate = omap2xxx_clk_get_core_rate(&dpll_ck); + cur_rate = omap2xxx_clk_get_core_rate(dclk); if (prcm->dpll_speed == cur_rate / 2) { omap2xxx_sdrc_reprogram(CORE_CLK_SRC_DPLL, 1); @@ -682,12 +526,12 @@ static u32 omap2_get_sysclkdiv(void) return div; } -static unsigned long omap2_osc_clk_recalc(struct clk *clk) +unsigned long omap2_osc_clk_recalc(struct clk *clk) { return omap2_get_apll_clkin() * omap2_get_sysclkdiv(); } -static unsigned long omap2_sys_clk_recalc(struct clk *clk) +unsigned long omap2_sys_clk_recalc(struct clk *clk) { return clk->parent->rate / omap2_get_sysclkdiv(); } @@ -712,85 +556,32 @@ void omap2_clk_prepare_for_reboot(void) */ static int __init omap2_clk_arch_init(void) { + struct clk *virt_prcm_set, *sys_ck, *dpll_ck, *mpu_ck; + unsigned long sys_ck_rate; + if (!mpurate) return -EINVAL; - if (clk_set_rate(&virt_prcm_set, mpurate)) + virt_prcm_set = clk_get(NULL, "virt_prcm_set"); + sys_ck = clk_get(NULL, "sys_ck"); + dpll_ck = clk_get(NULL, "dpll_ck"); + mpu_ck = clk_get(NULL, "mpu_ck"); + + if (clk_set_rate(virt_prcm_set, mpurate)) printk(KERN_ERR "Could not find matching MPU rate\n"); recalculate_root_clocks(); - printk(KERN_INFO "Switched to new clocking rate (Crystal/DPLL/MPU): " - "%ld.%01ld/%ld/%ld MHz\n", - (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10, - (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ; + sys_ck_rate = clk_get_rate(sys_ck); + + pr_info("Switched to new clocking rate (Crystal/DPLL/MPU): " + "%ld.%01ld/%ld/%ld MHz\n", + (sys_ck_rate / 1000000), (sys_ck_rate / 100000) % 10, + (clk_get_rate(dpll_ck) / 1000000), + (clk_get_rate(mpu_ck) / 1000000)); return 0; } arch_initcall(omap2_clk_arch_init); -int __init omap2_clk_init(void) -{ - struct prcm_config *prcm; - struct omap_clk *c; - u32 clkrate; - u16 cpu_clkflg; - - if (cpu_is_omap242x()) { - prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL; - cpu_mask = RATE_IN_242X; - cpu_clkflg = CK_242X; - } else if (cpu_is_omap2430()) { - prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL; - cpu_mask = RATE_IN_243X; - cpu_clkflg = CK_243X; - } - - clk_init(&omap2_clk_functions); - for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) - clk_preinit(c->lk.clk); - - osc_ck.rate = omap2_osc_clk_recalc(&osc_ck); - propagate_rate(&osc_ck); - sys_ck.rate = omap2_sys_clk_recalc(&sys_ck); - propagate_rate(&sys_ck); - - for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) - if (c->cpu & cpu_clkflg) { - clkdev_add(&c->lk); - clk_register(c->lk.clk); - omap2_init_clk_clkdm(c->lk.clk); - } - - /* Check the MPU rate set by bootloader */ - clkrate = omap2xxx_clk_get_core_rate(&dpll_ck); - for (prcm = rate_table; prcm->mpu_speed; prcm++) { - if (!(prcm->flags & cpu_mask)) - continue; - if (prcm->xtal_speed != sys_ck.rate) - continue; - if (prcm->dpll_speed <= clkrate) - break; - } - curr_prcm_set = prcm; - - recalculate_root_clocks(); - - printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): " - "%ld.%01ld/%ld/%ld MHz\n", - (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10, - (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ; - - /* - * Only enable those clocks we will need, let the drivers - * enable other clocks as necessary - */ - clk_enable_init_clocks(); - - /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */ - vclk = clk_get(NULL, "virt_prcm_set"); - sclk = clk_get(NULL, "sys_ck"); - - return 0; -} diff --git a/arch/arm/mach-omap2/clock2xxx.h b/arch/arm/mach-omap2/clock2xxx.h new file mode 100644 index 000000000000..e35efde4bd80 --- /dev/null +++ b/arch/arm/mach-omap2/clock2xxx.h @@ -0,0 +1,41 @@ +/* + * OMAP2 clock function prototypes and macros + * + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK_24XX_H +#define __ARCH_ARM_MACH_OMAP2_CLOCK_24XX_H + +unsigned long omap2_table_mpu_recalc(struct clk *clk); +int omap2_select_table_rate(struct clk *clk, unsigned long rate); +long omap2_round_to_table_rate(struct clk *clk, unsigned long rate); +unsigned long omap2_sys_clk_recalc(struct clk *clk); +unsigned long omap2_osc_clk_recalc(struct clk *clk); +unsigned long omap2_sys_clk_recalc(struct clk *clk); +unsigned long omap2_dpllcore_recalc(struct clk *clk); +int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate); +unsigned long omap2xxx_clk_get_core_rate(struct clk *clk); + +/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */ +#ifdef CONFIG_ARCH_OMAP2420 +#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR +#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2420_PRCM_CLKOUT_CTRL +#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2420_PRCM_CLKEMUL_CTRL +#else +#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR +#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2430_PRCM_CLKOUT_CTRL +#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2430_PRCM_CLKEMUL_CTRL +#endif + +extern void __iomem *prcm_clksrc_ctrl; + +extern struct clk *dclk; + +extern const struct clkops clkops_omap2430_i2chs_wait; +extern const struct clkops clkops_oscck; +extern const struct clkops clkops_apll96; +extern const struct clkops clkops_apll54; + +#endif diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock2xxx_data.c similarity index 73% rename from arch/arm/mach-omap2/clock24xx.h rename to arch/arm/mach-omap2/clock2xxx_data.c index 21238d18fc80..97dc7cf7751d 100644 --- a/arch/arm/mach-omap2/clock24xx.h +++ b/arch/arm/mach-omap2/clock2xxx_data.c @@ -1,8 +1,8 @@ /* - * linux/arch/arm/mach-omap2/clock24xx.h + * linux/arch/arm/mach-omap2/clock2xxx_data.c * - * Copyright (C) 2005-2008 Texas Instruments, Inc. - * Copyright (C) 2004-2008 Nokia Corporation + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation * * Contacts: * Richard Woodruff @@ -13,600 +13,21 @@ * published by the Free Software Foundation. */ -#ifndef __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H -#define __ARCH_ARM_MACH_OMAP2_CLOCK24XX_H +#include +#include +#include -#include "clock.h" +#include +#include "clock.h" +#include "clock2xxx.h" +#include "opp2xxx.h" #include "prm.h" #include "cm.h" #include "prm-regbits-24xx.h" #include "cm-regbits-24xx.h" #include "sdrc.h" -/* REVISIT: These should be set dynamically for CONFIG_MULTI_OMAP2 */ -#ifdef CONFIG_ARCH_OMAP2420 -#define OMAP_CM_REGADDR OMAP2420_CM_REGADDR -#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2420_PRCM_CLKOUT_CTRL -#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2420_PRCM_CLKEMUL_CTRL -#else -#define OMAP_CM_REGADDR OMAP2430_CM_REGADDR -#define OMAP24XX_PRCM_CLKOUT_CTRL OMAP2430_PRCM_CLKOUT_CTRL -#define OMAP24XX_PRCM_CLKEMUL_CTRL OMAP2430_PRCM_CLKEMUL_CTRL -#endif - -static unsigned long omap2_table_mpu_recalc(struct clk *clk); -static int omap2_select_table_rate(struct clk *clk, unsigned long rate); -static long omap2_round_to_table_rate(struct clk *clk, unsigned long rate); -static unsigned long omap2_sys_clk_recalc(struct clk *clk); -static unsigned long omap2_osc_clk_recalc(struct clk *clk); -static unsigned long omap2_sys_clk_recalc(struct clk *clk); -static unsigned long omap2_dpllcore_recalc(struct clk *clk); -static int omap2_reprogram_dpllcore(struct clk *clk, unsigned long rate); - -/* Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. - * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP - * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM - */ -struct prcm_config { - unsigned long xtal_speed; /* crystal rate */ - unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */ - unsigned long mpu_speed; /* speed of MPU */ - unsigned long cm_clksel_mpu; /* mpu divider */ - unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */ - unsigned long cm_clksel_gfx; /* gfx dividers */ - unsigned long cm_clksel1_core; /* major subsystem dividers */ - unsigned long cm_clksel1_pll; /* m,n */ - unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */ - unsigned long cm_clksel_mdm; /* modem dividers 2430 only */ - unsigned long base_sdrc_rfr; /* base refresh timing for a set */ - unsigned char flags; -}; - -/* - * The OMAP2 processor can be run at several discrete 'PRCM configurations'. - * These configurations are characterized by voltage and speed for clocks. - * The device is only validated for certain combinations. One way to express - * these combinations is via the 'ratio's' which the clocks operate with - * respect to each other. These ratio sets are for a given voltage/DPLL - * setting. All configurations can be described by a DPLL setting and a ratio - * There are 3 ratio sets for the 2430 and X ratio sets for 2420. - * - * 2430 differs from 2420 in that there are no more phase synchronizers used. - * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs - * 2430 (iva2.1, NOdsp, mdm) - */ - -/* Core fields for cm_clksel, not ratio governed */ -#define RX_CLKSEL_DSS1 (0x10 << 8) -#define RX_CLKSEL_DSS2 (0x0 << 13) -#define RX_CLKSEL_SSI (0x5 << 20) - -/*------------------------------------------------------------------------- - * Voltage/DPLL ratios - *-------------------------------------------------------------------------*/ - -/* 2430 Ratio's, 2430-Ratio Config 1 */ -#define R1_CLKSEL_L3 (4 << 0) -#define R1_CLKSEL_L4 (2 << 5) -#define R1_CLKSEL_USB (4 << 25) -#define R1_CM_CLKSEL1_CORE_VAL R1_CLKSEL_USB | RX_CLKSEL_SSI | \ - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ - R1_CLKSEL_L4 | R1_CLKSEL_L3 -#define R1_CLKSEL_MPU (2 << 0) -#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU -#define R1_CLKSEL_DSP (2 << 0) -#define R1_CLKSEL_DSP_IF (2 << 5) -#define R1_CM_CLKSEL_DSP_VAL R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF -#define R1_CLKSEL_GFX (2 << 0) -#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX -#define R1_CLKSEL_MDM (4 << 0) -#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM - -/* 2430-Ratio Config 2 */ -#define R2_CLKSEL_L3 (6 << 0) -#define R2_CLKSEL_L4 (2 << 5) -#define R2_CLKSEL_USB (2 << 25) -#define R2_CM_CLKSEL1_CORE_VAL R2_CLKSEL_USB | RX_CLKSEL_SSI | \ - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ - R2_CLKSEL_L4 | R2_CLKSEL_L3 -#define R2_CLKSEL_MPU (2 << 0) -#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU -#define R2_CLKSEL_DSP (2 << 0) -#define R2_CLKSEL_DSP_IF (3 << 5) -#define R2_CM_CLKSEL_DSP_VAL R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF -#define R2_CLKSEL_GFX (2 << 0) -#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX -#define R2_CLKSEL_MDM (6 << 0) -#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM - -/* 2430-Ratio Bootm (BYPASS) */ -#define RB_CLKSEL_L3 (1 << 0) -#define RB_CLKSEL_L4 (1 << 5) -#define RB_CLKSEL_USB (1 << 25) -#define RB_CM_CLKSEL1_CORE_VAL RB_CLKSEL_USB | RX_CLKSEL_SSI | \ - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ - RB_CLKSEL_L4 | RB_CLKSEL_L3 -#define RB_CLKSEL_MPU (1 << 0) -#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU -#define RB_CLKSEL_DSP (1 << 0) -#define RB_CLKSEL_DSP_IF (1 << 5) -#define RB_CM_CLKSEL_DSP_VAL RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF -#define RB_CLKSEL_GFX (1 << 0) -#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX -#define RB_CLKSEL_MDM (1 << 0) -#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM - -/* 2420 Ratio Equivalents */ -#define RXX_CLKSEL_VLYNQ (0x12 << 15) -#define RXX_CLKSEL_SSI (0x8 << 20) - -/* 2420-PRCM III 532MHz core */ -#define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */ -#define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */ -#define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */ -#define RIII_CM_CLKSEL1_CORE_VAL RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \ - RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \ - RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \ - RIII_CLKSEL_L3 -#define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */ -#define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU -#define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */ -#define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */ -#define RIII_SYNC_DSP (1 << 7) /* Enable sync */ -#define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */ -#define RIII_SYNC_IVA (1 << 13) /* Enable sync */ -#define RIII_CM_CLKSEL_DSP_VAL RIII_SYNC_IVA | RIII_CLKSEL_IVA | \ - RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \ - RIII_CLKSEL_DSP -#define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */ -#define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX - -/* 2420-PRCM II 600MHz core */ -#define RII_CLKSEL_L3 (6 << 0) /* 100MHz */ -#define RII_CLKSEL_L4 (2 << 5) /* 50MHz */ -#define RII_CLKSEL_USB (2 << 25) /* 50MHz */ -#define RII_CM_CLKSEL1_CORE_VAL RII_CLKSEL_USB | \ - RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \ - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ - RII_CLKSEL_L4 | RII_CLKSEL_L3 -#define RII_CLKSEL_MPU (2 << 0) /* 300MHz */ -#define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU -#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */ -#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */ -#define RII_SYNC_DSP (0 << 7) /* Bypass sync */ -#define RII_CLKSEL_IVA (3 << 8) /* iva1 - 200MHz */ -#define RII_SYNC_IVA (0 << 13) /* Bypass sync */ -#define RII_CM_CLKSEL_DSP_VAL RII_SYNC_IVA | RII_CLKSEL_IVA | \ - RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \ - RII_CLKSEL_DSP -#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */ -#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX - -/* 2420-PRCM I 660MHz core */ -#define RI_CLKSEL_L3 (4 << 0) /* 165MHz */ -#define RI_CLKSEL_L4 (2 << 5) /* 82.5MHz */ -#define RI_CLKSEL_USB (4 << 25) /* 41.25MHz */ -#define RI_CM_CLKSEL1_CORE_VAL RI_CLKSEL_USB | \ - RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \ - RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ - RI_CLKSEL_L4 | RI_CLKSEL_L3 -#define RI_CLKSEL_MPU (2 << 0) /* 330MHz */ -#define RI_CM_CLKSEL_MPU_VAL RI_CLKSEL_MPU -#define RI_CLKSEL_DSP (3 << 0) /* c5x - 220MHz */ -#define RI_CLKSEL_DSP_IF (2 << 5) /* c5x - 110MHz */ -#define RI_SYNC_DSP (1 << 7) /* Activate sync */ -#define RI_CLKSEL_IVA (4 << 8) /* iva1 - 165MHz */ -#define RI_SYNC_IVA (0 << 13) /* Bypass sync */ -#define RI_CM_CLKSEL_DSP_VAL RI_SYNC_IVA | RI_CLKSEL_IVA | \ - RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \ - RI_CLKSEL_DSP -#define RI_CLKSEL_GFX (1 << 0) /* 165MHz */ -#define RI_CM_CLKSEL_GFX_VAL RI_CLKSEL_GFX - -/* 2420-PRCM VII (boot) */ -#define RVII_CLKSEL_L3 (1 << 0) -#define RVII_CLKSEL_L4 (1 << 5) -#define RVII_CLKSEL_DSS1 (1 << 8) -#define RVII_CLKSEL_DSS2 (0 << 13) -#define RVII_CLKSEL_VLYNQ (1 << 15) -#define RVII_CLKSEL_SSI (1 << 20) -#define RVII_CLKSEL_USB (1 << 25) - -#define RVII_CM_CLKSEL1_CORE_VAL RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \ - RVII_CLKSEL_VLYNQ | RVII_CLKSEL_DSS2 | \ - RVII_CLKSEL_DSS1 | RVII_CLKSEL_L4 | RVII_CLKSEL_L3 - -#define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */ -#define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU - -#define RVII_CLKSEL_DSP (1 << 0) -#define RVII_CLKSEL_DSP_IF (1 << 5) -#define RVII_SYNC_DSP (0 << 7) -#define RVII_CLKSEL_IVA (1 << 8) -#define RVII_SYNC_IVA (0 << 13) -#define RVII_CM_CLKSEL_DSP_VAL RVII_SYNC_IVA | RVII_CLKSEL_IVA | RVII_SYNC_DSP | \ - RVII_CLKSEL_DSP_IF | RVII_CLKSEL_DSP - -#define RVII_CLKSEL_GFX (1 << 0) -#define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX - -/*------------------------------------------------------------------------- - * 2430 Target modes: Along with each configuration the CPU has several - * modes which goes along with them. Modes mainly are the addition of - * describe DPLL combinations to go along with a ratio. - *-------------------------------------------------------------------------*/ - -/* Hardware governed */ -#define MX_48M_SRC (0 << 3) -#define MX_54M_SRC (0 << 5) -#define MX_APLLS_CLIKIN_12 (3 << 23) -#define MX_APLLS_CLIKIN_13 (2 << 23) -#define MX_APLLS_CLIKIN_19_2 (0 << 23) - -/* - * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed - * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz - */ -#define M5A_DPLL_MULT_12 (133 << 12) -#define M5A_DPLL_DIV_12 (5 << 8) -#define M5A_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define M5A_DPLL_MULT_13 (61 << 12) -#define M5A_DPLL_DIV_13 (2 << 8) -#define M5A_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 -#define M5A_DPLL_MULT_19 (55 << 12) -#define M5A_DPLL_DIV_19 (3 << 8) -#define M5A_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ - M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \ - MX_APLLS_CLIKIN_19_2 -/* #5b (ratio1) target DPLL = 200*2 = 400MHz */ -#define M5B_DPLL_MULT_12 (50 << 12) -#define M5B_DPLL_DIV_12 (2 << 8) -#define M5B_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define M5B_DPLL_MULT_13 (200 << 12) -#define M5B_DPLL_DIV_13 (12 << 8) - -#define M5B_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 -#define M5B_DPLL_MULT_19 (125 << 12) -#define M5B_DPLL_DIV_19 (31 << 8) -#define M5B_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ - M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \ - MX_APLLS_CLIKIN_19_2 -/* - * #4 (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz - */ -#define M4_DPLL_MULT_12 (133 << 12) -#define M4_DPLL_DIV_12 (3 << 8) -#define M4_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 - -#define M4_DPLL_MULT_13 (399 << 12) -#define M4_DPLL_DIV_13 (12 << 8) -#define M4_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 - -#define M4_DPLL_MULT_19 (145 << 12) -#define M4_DPLL_DIV_19 (6 << 8) -#define M4_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ - M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \ - MX_APLLS_CLIKIN_19_2 - -/* - * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz - */ -#define M3_DPLL_MULT_12 (55 << 12) -#define M3_DPLL_DIV_12 (1 << 8) -#define M3_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define M3_DPLL_MULT_13 (76 << 12) -#define M3_DPLL_DIV_13 (2 << 8) -#define M3_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 -#define M3_DPLL_MULT_19 (17 << 12) -#define M3_DPLL_DIV_19 (0 << 8) -#define M3_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ - M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \ - MX_APLLS_CLIKIN_19_2 - -/* - * #2 (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz - */ -#define M2_DPLL_MULT_12 (55 << 12) -#define M2_DPLL_DIV_12 (1 << 8) -#define M2_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 - -/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2, - * relock time issue */ -/* Core frequency changed from 330/165 to 329/164 MHz*/ -#define M2_DPLL_MULT_13 (76 << 12) -#define M2_DPLL_DIV_13 (2 << 8) -#define M2_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 - -#define M2_DPLL_MULT_19 (17 << 12) -#define M2_DPLL_DIV_19 (0 << 8) -#define M2_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | \ - M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \ - MX_APLLS_CLIKIN_19_2 - -/* boot (boot) */ -#define MB_DPLL_MULT (1 << 12) -#define MB_DPLL_DIV (0 << 8) -#define MB_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ - MB_DPLL_MULT | MX_APLLS_CLIKIN_12 - -#define MB_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ - MB_DPLL_MULT | MX_APLLS_CLIKIN_13 - -#define MB_CM_CLKSEL1_PLL_19_VAL MX_48M_SRC | MX_54M_SRC | MB_DPLL_DIV |\ - MB_DPLL_MULT | MX_APLLS_CLIKIN_19 - -/* - * 2430 - chassis (sedna) - * 165 (ratio1) same as above #2 - * 150 (ratio1) - * 133 (ratio2) same as above #4 - * 110 (ratio2) same as above #3 - * 104 (ratio2) - * boot (boot) - */ - -/* PRCM I target DPLL = 2*330MHz = 660MHz */ -#define MI_DPLL_MULT_12 (55 << 12) -#define MI_DPLL_DIV_12 (1 << 8) -#define MI_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 - -/* - * 2420 Equivalent - mode registers - * PRCM II , target DPLL = 2*300MHz = 600MHz - */ -#define MII_DPLL_MULT_12 (50 << 12) -#define MII_DPLL_DIV_12 (1 << 8) -#define MII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define MII_DPLL_MULT_13 (300 << 12) -#define MII_DPLL_DIV_13 (12 << 8) -#define MII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 - -/* PRCM III target DPLL = 2*266 = 532MHz*/ -#define MIII_DPLL_MULT_12 (133 << 12) -#define MIII_DPLL_DIV_12 (5 << 8) -#define MIII_CM_CLKSEL1_PLL_12_VAL MX_48M_SRC | MX_54M_SRC | \ - MIII_DPLL_DIV_12 | MIII_DPLL_MULT_12 | \ - MX_APLLS_CLIKIN_12 -#define MIII_DPLL_MULT_13 (266 << 12) -#define MIII_DPLL_DIV_13 (12 << 8) -#define MIII_CM_CLKSEL1_PLL_13_VAL MX_48M_SRC | MX_54M_SRC | \ - MIII_DPLL_DIV_13 | MIII_DPLL_MULT_13 | \ - MX_APLLS_CLIKIN_13 - -/* PRCM VII (boot bypass) */ -#define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL -#define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL - -/* High and low operation value */ -#define MX_CLKSEL2_PLL_2x_VAL (2 << 0) -#define MX_CLKSEL2_PLL_1x_VAL (1 << 0) - -/* MPU speed defines */ -#define S12M 12000000 -#define S13M 13000000 -#define S19M 19200000 -#define S26M 26000000 -#define S100M 100000000 -#define S133M 133000000 -#define S150M 150000000 -#define S164M 164000000 -#define S165M 165000000 -#define S199M 199000000 -#define S200M 200000000 -#define S266M 266000000 -#define S300M 300000000 -#define S329M 329000000 -#define S330M 330000000 -#define S399M 399000000 -#define S400M 400000000 -#define S532M 532000000 -#define S600M 600000000 -#define S658M 658000000 -#define S660M 660000000 -#define S798M 798000000 - -/*------------------------------------------------------------------------- - * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. - * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, - * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, - * CM_CLKSEL2_PLL, CM_CLKSEL_MDM - * - * Filling in table based on H4 boards and 2430-SDPs variants available. - * There are quite a few more rates combinations which could be defined. - * - * When multiple values are defined the start up will try and choose the - * fastest one. If a 'fast' value is defined, then automatically, the /2 - * one should be included as it can be used. Generally having more that - * one fast set does not make sense, as static timings need to be changed - * to change the set. The exception is the bypass setting which is - * availble for low power bypass. - * - * Note: This table needs to be sorted, fastest to slowest. - *-------------------------------------------------------------------------*/ -static struct prcm_config rate_table[] = { - /* PRCM I - FAST */ - {S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ - RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL, - RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz, - RATE_IN_242X}, - - /* PRCM II - FAST */ - {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ - RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, - RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, - RATE_IN_242X}, - - {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ - RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, - RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, - RATE_IN_242X}, - - /* PRCM III - FAST */ - {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ - RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, - RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, - RATE_IN_242X}, - - {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ - RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, - RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, - RATE_IN_242X}, - - /* PRCM II - SLOW */ - {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ - RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, - RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, - RATE_IN_242X}, - - {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ - RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, - RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, - RATE_IN_242X}, - - /* PRCM III - SLOW */ - {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ - RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, - RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, - RATE_IN_242X}, - - {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ - RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, - RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, - RATE_IN_242X}, - - /* PRCM-VII (boot-bypass) */ - {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/ - RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, - RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS, - RATE_IN_242X}, - - /* PRCM-VII (boot-bypass) */ - {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */ - RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, - RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS, - RATE_IN_242X}, - - /* PRCM #4 - ratio2 (ES2.1) - FAST */ - {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */ - R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, - R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_133MHz, - RATE_IN_243X}, - - /* PRCM #2 - ratio1 (ES2) - FAST */ - {S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_165MHz, - RATE_IN_243X}, - - /* PRCM #5a - ratio1 - FAST */ - {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_133MHz, - RATE_IN_243X}, - - /* PRCM #5b - ratio1 - FAST */ - {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_100MHz, - RATE_IN_243X}, - - /* PRCM #4 - ratio1 (ES2.1) - SLOW */ - {S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ - R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, - R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_133MHz, - RATE_IN_243X}, - - /* PRCM #2 - ratio1 (ES2) - SLOW */ - {S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_165MHz, - RATE_IN_243X}, - - /* PRCM #5a - ratio1 - SLOW */ - {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_133MHz, - RATE_IN_243X}, - - /* PRCM #5b - ratio1 - SLOW*/ - {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */ - R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, - R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_100MHz, - RATE_IN_243X}, - - /* PRCM-boot/bypass */ - {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */ - RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, - RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL, - MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_BYPASS, - RATE_IN_243X}, - - /* PRCM-boot/bypass */ - {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */ - RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, - RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL, - MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, - SDRC_RFR_CTRL_BYPASS, - RATE_IN_243X}, - - { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, -}; - /*------------------------------------------------------------------------- * 24xx clock tree. * @@ -2653,5 +2074,236 @@ static struct clk virt_prcm_set = { .round_rate = &omap2_round_to_table_rate, }; -#endif + +/* + * clkdev integration + */ + +static struct omap_clk omap24xx_clks[] = { + /* external root sources */ + CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X), + CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X), + CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X), + CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X), + CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X), + /* internal analog sources */ + CLK(NULL, "dpll_ck", &dpll_ck, CK_243X | CK_242X), + CLK(NULL, "apll96_ck", &apll96_ck, CK_243X | CK_242X), + CLK(NULL, "apll54_ck", &apll54_ck, CK_243X | CK_242X), + /* internal prcm root sources */ + CLK(NULL, "func_54m_ck", &func_54m_ck, CK_243X | CK_242X), + CLK(NULL, "core_ck", &core_ck, CK_243X | CK_242X), + CLK(NULL, "func_96m_ck", &func_96m_ck, CK_243X | CK_242X), + CLK(NULL, "func_48m_ck", &func_48m_ck, CK_243X | CK_242X), + CLK(NULL, "func_12m_ck", &func_12m_ck, CK_243X | CK_242X), + CLK(NULL, "ck_wdt1_osc", &wdt1_osc_ck, CK_243X | CK_242X), + CLK(NULL, "sys_clkout_src", &sys_clkout_src, CK_243X | CK_242X), + CLK(NULL, "sys_clkout", &sys_clkout, CK_243X | CK_242X), + CLK(NULL, "sys_clkout2_src", &sys_clkout2_src, CK_242X), + CLK(NULL, "sys_clkout2", &sys_clkout2, CK_242X), + CLK(NULL, "emul_ck", &emul_ck, CK_242X), + /* mpu domain clocks */ + CLK(NULL, "mpu_ck", &mpu_ck, CK_243X | CK_242X), + /* dsp domain clocks */ + CLK(NULL, "dsp_fck", &dsp_fck, CK_243X | CK_242X), + CLK(NULL, "dsp_irate_ick", &dsp_irate_ick, CK_243X | CK_242X), + CLK(NULL, "dsp_ick", &dsp_ick, CK_242X), + CLK(NULL, "iva2_1_ick", &iva2_1_ick, CK_243X), + CLK(NULL, "iva1_ifck", &iva1_ifck, CK_242X), + CLK(NULL, "iva1_mpu_int_ifck", &iva1_mpu_int_ifck, CK_242X), + /* GFX domain clocks */ + CLK(NULL, "gfx_3d_fck", &gfx_3d_fck, CK_243X | CK_242X), + CLK(NULL, "gfx_2d_fck", &gfx_2d_fck, CK_243X | CK_242X), + CLK(NULL, "gfx_ick", &gfx_ick, CK_243X | CK_242X), + /* Modem domain clocks */ + CLK(NULL, "mdm_ick", &mdm_ick, CK_243X), + CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X), + /* DSS domain clocks */ + CLK("omapdss", "ick", &dss_ick, CK_243X | CK_242X), + CLK("omapdss", "dss1_fck", &dss1_fck, CK_243X | CK_242X), + CLK("omapdss", "dss2_fck", &dss2_fck, CK_243X | CK_242X), + CLK("omapdss", "tv_fck", &dss_54m_fck, CK_243X | CK_242X), + /* L3 domain clocks */ + CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X), + CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X), + CLK(NULL, "usb_l4_ick", &usb_l4_ick, CK_243X | CK_242X), + /* L4 domain clocks */ + CLK(NULL, "l4_ck", &l4_ck, CK_243X | CK_242X), + CLK(NULL, "ssi_l4_ick", &ssi_l4_ick, CK_243X | CK_242X), + /* virtual meta-group clock */ + CLK(NULL, "virt_prcm_set", &virt_prcm_set, CK_243X | CK_242X), + /* general l4 interface ck, multi-parent functional clk */ + CLK(NULL, "gpt1_ick", &gpt1_ick, CK_243X | CK_242X), + CLK(NULL, "gpt1_fck", &gpt1_fck, CK_243X | CK_242X), + CLK(NULL, "gpt2_ick", &gpt2_ick, CK_243X | CK_242X), + CLK(NULL, "gpt2_fck", &gpt2_fck, CK_243X | CK_242X), + CLK(NULL, "gpt3_ick", &gpt3_ick, CK_243X | CK_242X), + CLK(NULL, "gpt3_fck", &gpt3_fck, CK_243X | CK_242X), + CLK(NULL, "gpt4_ick", &gpt4_ick, CK_243X | CK_242X), + CLK(NULL, "gpt4_fck", &gpt4_fck, CK_243X | CK_242X), + CLK(NULL, "gpt5_ick", &gpt5_ick, CK_243X | CK_242X), + CLK(NULL, "gpt5_fck", &gpt5_fck, CK_243X | CK_242X), + CLK(NULL, "gpt6_ick", &gpt6_ick, CK_243X | CK_242X), + CLK(NULL, "gpt6_fck", &gpt6_fck, CK_243X | CK_242X), + CLK(NULL, "gpt7_ick", &gpt7_ick, CK_243X | CK_242X), + CLK(NULL, "gpt7_fck", &gpt7_fck, CK_243X | CK_242X), + CLK(NULL, "gpt8_ick", &gpt8_ick, CK_243X | CK_242X), + CLK(NULL, "gpt8_fck", &gpt8_fck, CK_243X | CK_242X), + CLK(NULL, "gpt9_ick", &gpt9_ick, CK_243X | CK_242X), + CLK(NULL, "gpt9_fck", &gpt9_fck, CK_243X | CK_242X), + CLK(NULL, "gpt10_ick", &gpt10_ick, CK_243X | CK_242X), + CLK(NULL, "gpt10_fck", &gpt10_fck, CK_243X | CK_242X), + CLK(NULL, "gpt11_ick", &gpt11_ick, CK_243X | CK_242X), + CLK(NULL, "gpt11_fck", &gpt11_fck, CK_243X | CK_242X), + CLK(NULL, "gpt12_ick", &gpt12_ick, CK_243X | CK_242X), + CLK(NULL, "gpt12_fck", &gpt12_fck, CK_243X | CK_242X), + CLK("omap-mcbsp.1", "ick", &mcbsp1_ick, CK_243X | CK_242X), + CLK("omap-mcbsp.1", "fck", &mcbsp1_fck, CK_243X | CK_242X), + CLK("omap-mcbsp.2", "ick", &mcbsp2_ick, CK_243X | CK_242X), + CLK("omap-mcbsp.2", "fck", &mcbsp2_fck, CK_243X | CK_242X), + CLK("omap-mcbsp.3", "ick", &mcbsp3_ick, CK_243X), + CLK("omap-mcbsp.3", "fck", &mcbsp3_fck, CK_243X), + CLK("omap-mcbsp.4", "ick", &mcbsp4_ick, CK_243X), + CLK("omap-mcbsp.4", "fck", &mcbsp4_fck, CK_243X), + CLK("omap-mcbsp.5", "ick", &mcbsp5_ick, CK_243X), + CLK("omap-mcbsp.5", "fck", &mcbsp5_fck, CK_243X), + CLK("omap2_mcspi.1", "ick", &mcspi1_ick, CK_243X | CK_242X), + CLK("omap2_mcspi.1", "fck", &mcspi1_fck, CK_243X | CK_242X), + CLK("omap2_mcspi.2", "ick", &mcspi2_ick, CK_243X | CK_242X), + CLK("omap2_mcspi.2", "fck", &mcspi2_fck, CK_243X | CK_242X), + CLK("omap2_mcspi.3", "ick", &mcspi3_ick, CK_243X), + CLK("omap2_mcspi.3", "fck", &mcspi3_fck, CK_243X), + CLK(NULL, "uart1_ick", &uart1_ick, CK_243X | CK_242X), + CLK(NULL, "uart1_fck", &uart1_fck, CK_243X | CK_242X), + CLK(NULL, "uart2_ick", &uart2_ick, CK_243X | CK_242X), + CLK(NULL, "uart2_fck", &uart2_fck, CK_243X | CK_242X), + CLK(NULL, "uart3_ick", &uart3_ick, CK_243X | CK_242X), + CLK(NULL, "uart3_fck", &uart3_fck, CK_243X | CK_242X), + CLK(NULL, "gpios_ick", &gpios_ick, CK_243X | CK_242X), + CLK(NULL, "gpios_fck", &gpios_fck, CK_243X | CK_242X), + CLK("omap_wdt", "ick", &mpu_wdt_ick, CK_243X | CK_242X), + CLK("omap_wdt", "fck", &mpu_wdt_fck, CK_243X | CK_242X), + CLK(NULL, "sync_32k_ick", &sync_32k_ick, CK_243X | CK_242X), + CLK(NULL, "wdt1_ick", &wdt1_ick, CK_243X | CK_242X), + CLK(NULL, "omapctrl_ick", &omapctrl_ick, CK_243X | CK_242X), + CLK(NULL, "icr_ick", &icr_ick, CK_243X), + CLK("omap24xxcam", "fck", &cam_fck, CK_243X | CK_242X), + CLK("omap24xxcam", "ick", &cam_ick, CK_243X | CK_242X), + CLK(NULL, "mailboxes_ick", &mailboxes_ick, CK_243X | CK_242X), + CLK(NULL, "wdt4_ick", &wdt4_ick, CK_243X | CK_242X), + CLK(NULL, "wdt4_fck", &wdt4_fck, CK_243X | CK_242X), + CLK(NULL, "wdt3_ick", &wdt3_ick, CK_242X), + CLK(NULL, "wdt3_fck", &wdt3_fck, CK_242X), + CLK(NULL, "mspro_ick", &mspro_ick, CK_243X | CK_242X), + CLK(NULL, "mspro_fck", &mspro_fck, CK_243X | CK_242X), + CLK("mmci-omap.0", "ick", &mmc_ick, CK_242X), + CLK("mmci-omap.0", "fck", &mmc_fck, CK_242X), + CLK(NULL, "fac_ick", &fac_ick, CK_243X | CK_242X), + CLK(NULL, "fac_fck", &fac_fck, CK_243X | CK_242X), + CLK(NULL, "eac_ick", &eac_ick, CK_242X), + CLK(NULL, "eac_fck", &eac_fck, CK_242X), + CLK("omap_hdq.0", "ick", &hdq_ick, CK_243X | CK_242X), + CLK("omap_hdq.1", "fck", &hdq_fck, CK_243X | CK_242X), + CLK("i2c_omap.1", "ick", &i2c1_ick, CK_243X | CK_242X), + CLK("i2c_omap.1", "fck", &i2c1_fck, CK_242X), + CLK("i2c_omap.1", "fck", &i2chs1_fck, CK_243X), + CLK("i2c_omap.2", "ick", &i2c2_ick, CK_243X | CK_242X), + CLK("i2c_omap.2", "fck", &i2c2_fck, CK_242X), + CLK("i2c_omap.2", "fck", &i2chs2_fck, CK_243X), + CLK(NULL, "gpmc_fck", &gpmc_fck, CK_243X | CK_242X), + CLK(NULL, "sdma_fck", &sdma_fck, CK_243X | CK_242X), + CLK(NULL, "sdma_ick", &sdma_ick, CK_243X | CK_242X), + CLK(NULL, "vlynq_ick", &vlynq_ick, CK_242X), + CLK(NULL, "vlynq_fck", &vlynq_fck, CK_242X), + CLK(NULL, "sdrc_ick", &sdrc_ick, CK_243X), + CLK(NULL, "des_ick", &des_ick, CK_243X | CK_242X), + CLK(NULL, "sha_ick", &sha_ick, CK_243X | CK_242X), + CLK("omap_rng", "ick", &rng_ick, CK_243X | CK_242X), + CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X), + CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X), + CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X), + CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X), + CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X), + CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X), + CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X), + CLK("mmci-omap-hs.1", "fck", &mmchs2_fck, CK_243X), + CLK(NULL, "gpio5_ick", &gpio5_ick, CK_243X), + CLK(NULL, "gpio5_fck", &gpio5_fck, CK_243X), + CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X), + CLK("mmci-omap-hs.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X), + CLK("mmci-omap-hs.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X), +}; + +/* + * init code + */ + +int __init omap2_clk_init(void) +{ + const struct prcm_config *prcm; + struct omap_clk *c; + u32 clkrate; + u16 cpu_clkflg; + + if (cpu_is_omap242x()) { + prcm_clksrc_ctrl = OMAP2420_PRCM_CLKSRC_CTRL; + cpu_mask = RATE_IN_242X; + cpu_clkflg = CK_242X; + rate_table = omap2420_rate_table; + } else if (cpu_is_omap2430()) { + prcm_clksrc_ctrl = OMAP2430_PRCM_CLKSRC_CTRL; + cpu_mask = RATE_IN_243X; + cpu_clkflg = CK_243X; + rate_table = omap2430_rate_table; + } + + clk_init(&omap2_clk_functions); + + for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) + clk_preinit(c->lk.clk); + + osc_ck.rate = omap2_osc_clk_recalc(&osc_ck); + propagate_rate(&osc_ck); + sys_ck.rate = omap2_sys_clk_recalc(&sys_ck); + propagate_rate(&sys_ck); + + for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++) + if (c->cpu & cpu_clkflg) { + clkdev_add(&c->lk); + clk_register(c->lk.clk); + omap2_init_clk_clkdm(c->lk.clk); + } + + /* Check the MPU rate set by bootloader */ + clkrate = omap2xxx_clk_get_core_rate(&dpll_ck); + for (prcm = rate_table; prcm->mpu_speed; prcm++) { + if (!(prcm->flags & cpu_mask)) + continue; + if (prcm->xtal_speed != sys_ck.rate) + continue; + if (prcm->dpll_speed <= clkrate) + break; + } + curr_prcm_set = prcm; + + recalculate_root_clocks(); + + printk(KERN_INFO "Clocking rate (Crystal/DPLL/MPU): " + "%ld.%01ld/%ld/%ld MHz\n", + (sys_ck.rate / 1000000), (sys_ck.rate / 100000) % 10, + (dpll_ck.rate / 1000000), (mpu_ck.rate / 1000000)) ; + + /* + * Only enable those clocks we will need, let the drivers + * enable other clocks as necessary + */ + clk_enable_init_clocks(); + + /* Avoid sleeping sleeping during omap2_clk_prepare_for_reboot() */ + vclk = clk_get(NULL, "virt_prcm_set"); + sclk = clk_get(NULL, "sys_ck"); + dclk = clk_get(NULL, "dpll_ck"); + + return 0; +} diff --git a/arch/arm/mach-omap2/opp2420_data.c b/arch/arm/mach-omap2/opp2420_data.c new file mode 100644 index 000000000000..126a9396b3a8 --- /dev/null +++ b/arch/arm/mach-omap2/opp2420_data.c @@ -0,0 +1,126 @@ +/* + * opp2420_data.c - old-style "OPP" table for OMAP2420 + * + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation + * + * Richard Woodruff + * + * The OMAP2 processor can be run at several discrete 'PRCM configurations'. + * These configurations are characterized by voltage and speed for clocks. + * The device is only validated for certain combinations. One way to express + * these combinations is via the 'ratio's' which the clocks operate with + * respect to each other. These ratio sets are for a given voltage/DPLL + * setting. All configurations can be described by a DPLL setting and a ratio + * There are 3 ratio sets for the 2430 and X ratio sets for 2420. + * + * 2430 differs from 2420 in that there are no more phase synchronizers used. + * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs + * 2430 (iva2.1, NOdsp, mdm) + * + * XXX Missing voltage data. + * + * THe format described in this file is deprecated. Once a reasonable + * OPP API exists, the data in this file should be converted to use it. + * + * This is technically part of the OMAP2xxx clock code. + */ + +#include "opp2xxx.h" +#include "sdrc.h" +#include "clock.h" + +/*------------------------------------------------------------------------- + * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. + * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, + * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, + * CM_CLKSEL2_PLL, CM_CLKSEL_MDM + * + * Filling in table based on H4 boards and 2430-SDPs variants available. + * There are quite a few more rates combinations which could be defined. + * + * When multiple values are defined the start up will try and choose the + * fastest one. If a 'fast' value is defined, then automatically, the /2 + * one should be included as it can be used. Generally having more that + * one fast set does not make sense, as static timings need to be changed + * to change the set. The exception is the bypass setting which is + * availble for low power bypass. + * + * Note: This table needs to be sorted, fastest to slowest. + *-------------------------------------------------------------------------*/ +const struct prcm_config omap2420_rate_table[] = { + /* PRCM I - FAST */ + {S12M, S660M, S330M, RI_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ + RI_CM_CLKSEL_DSP_VAL, RI_CM_CLKSEL_GFX_VAL, + RI_CM_CLKSEL1_CORE_VAL, MI_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_165MHz, + RATE_IN_242X}, + + /* PRCM II - FAST */ + {S12M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + {S13M, S600M, S300M, RII_CM_CLKSEL_MPU_VAL, /* 300MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + /* PRCM III - FAST */ + {S12M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + {S13M, S532M, S266M, RIII_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + /* PRCM II - SLOW */ + {S12M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + {S13M, S300M, S150M, RII_CM_CLKSEL_MPU_VAL, /* 150MHz ARM */ + RII_CM_CLKSEL_DSP_VAL, RII_CM_CLKSEL_GFX_VAL, + RII_CM_CLKSEL1_CORE_VAL, MII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_100MHz, + RATE_IN_242X}, + + /* PRCM III - SLOW */ + {S12M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + {S13M, S266M, S133M, RIII_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + RIII_CM_CLKSEL_DSP_VAL, RIII_CM_CLKSEL_GFX_VAL, + RIII_CM_CLKSEL1_CORE_VAL, MIII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_133MHz, + RATE_IN_242X}, + + /* PRCM-VII (boot-bypass) */ + {S12M, S12M, S12M, RVII_CM_CLKSEL_MPU_VAL, /* 12MHz ARM*/ + RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, + RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS, + RATE_IN_242X}, + + /* PRCM-VII (boot-bypass) */ + {S13M, S13M, S13M, RVII_CM_CLKSEL_MPU_VAL, /* 13MHz ARM */ + RVII_CM_CLKSEL_DSP_VAL, RVII_CM_CLKSEL_GFX_VAL, + RVII_CM_CLKSEL1_CORE_VAL, MVII_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, 0, SDRC_RFR_CTRL_BYPASS, + RATE_IN_242X}, + + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, +}; diff --git a/arch/arm/mach-omap2/opp2430_data.c b/arch/arm/mach-omap2/opp2430_data.c new file mode 100644 index 000000000000..edb81672c844 --- /dev/null +++ b/arch/arm/mach-omap2/opp2430_data.c @@ -0,0 +1,133 @@ +/* + * opp2420_data.c - old-style "OPP" table for OMAP2420 + * + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation + * + * Richard Woodruff + * + * The OMAP2 processor can be run at several discrete 'PRCM configurations'. + * These configurations are characterized by voltage and speed for clocks. + * The device is only validated for certain combinations. One way to express + * these combinations is via the 'ratio's' which the clocks operate with + * respect to each other. These ratio sets are for a given voltage/DPLL + * setting. All configurations can be described by a DPLL setting and a ratio + * There are 3 ratio sets for the 2430 and X ratio sets for 2420. + * + * 2430 differs from 2420 in that there are no more phase synchronizers used. + * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs + * 2430 (iva2.1, NOdsp, mdm) + * + * XXX Missing voltage data. + * + * THe format described in this file is deprecated. Once a reasonable + * OPP API exists, the data in this file should be converted to use it. + * + * This is technically part of the OMAP2xxx clock code. + */ + +#include "opp2xxx.h" +#include "sdrc.h" +#include "clock.h" + +/*------------------------------------------------------------------------- + * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. + * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU, + * CM_CLKSEL_DSP, CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL, + * CM_CLKSEL2_PLL, CM_CLKSEL_MDM + * + * Filling in table based on H4 boards and 2430-SDPs variants available. + * There are quite a few more rates combinations which could be defined. + * + * When multiple values are defined the start up will try and choose the + * fastest one. If a 'fast' value is defined, then automatically, the /2 + * one should be included as it can be used. Generally having more that + * one fast set does not make sense, as static timings need to be changed + * to change the set. The exception is the bypass setting which is + * availble for low power bypass. + * + * Note: This table needs to be sorted, fastest to slowest. + *-------------------------------------------------------------------------*/ +const struct prcm_config omap2430_rate_table[] = { + /* PRCM #4 - ratio2 (ES2.1) - FAST */ + {S13M, S798M, S399M, R2_CM_CLKSEL_MPU_VAL, /* 399MHz ARM */ + R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, + R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R2_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #2 - ratio1 (ES2) - FAST */ + {S13M, S658M, S329M, R1_CM_CLKSEL_MPU_VAL, /* 330MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_165MHz, + RATE_IN_243X}, + + /* PRCM #5a - ratio1 - FAST */ + {S13M, S532M, S266M, R1_CM_CLKSEL_MPU_VAL, /* 266MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #5b - ratio1 - FAST */ + {S13M, S400M, S200M, R1_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_100MHz, + RATE_IN_243X}, + + /* PRCM #4 - ratio1 (ES2.1) - SLOW */ + {S13M, S399M, S199M, R2_CM_CLKSEL_MPU_VAL, /* 200MHz ARM */ + R2_CM_CLKSEL_DSP_VAL, R2_CM_CLKSEL_GFX_VAL, + R2_CM_CLKSEL1_CORE_VAL, M4_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R2_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #2 - ratio1 (ES2) - SLOW */ + {S13M, S329M, S164M, R1_CM_CLKSEL_MPU_VAL, /* 165MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M2_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_165MHz, + RATE_IN_243X}, + + /* PRCM #5a - ratio1 - SLOW */ + {S13M, S266M, S133M, R1_CM_CLKSEL_MPU_VAL, /* 133MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5A_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_133MHz, + RATE_IN_243X}, + + /* PRCM #5b - ratio1 - SLOW*/ + {S13M, S200M, S100M, R1_CM_CLKSEL_MPU_VAL, /* 100MHz ARM */ + R1_CM_CLKSEL_DSP_VAL, R1_CM_CLKSEL_GFX_VAL, + R1_CM_CLKSEL1_CORE_VAL, M5B_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_1x_VAL, R1_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_100MHz, + RATE_IN_243X}, + + /* PRCM-boot/bypass */ + {S13M, S13M, S13M, RB_CM_CLKSEL_MPU_VAL, /* 13Mhz */ + RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, + RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_13_VAL, + MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_BYPASS, + RATE_IN_243X}, + + /* PRCM-boot/bypass */ + {S12M, S12M, S12M, RB_CM_CLKSEL_MPU_VAL, /* 12Mhz */ + RB_CM_CLKSEL_DSP_VAL, RB_CM_CLKSEL_GFX_VAL, + RB_CM_CLKSEL1_CORE_VAL, MB_CM_CLKSEL1_PLL_12_VAL, + MX_CLKSEL2_PLL_2x_VAL, RB_CM_CLKSEL_MDM_VAL, + SDRC_RFR_CTRL_BYPASS, + RATE_IN_243X}, + + { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}, +}; diff --git a/arch/arm/mach-omap2/opp2xxx.h b/arch/arm/mach-omap2/opp2xxx.h new file mode 100644 index 000000000000..ed6df04e2f29 --- /dev/null +++ b/arch/arm/mach-omap2/opp2xxx.h @@ -0,0 +1,424 @@ +/* + * opp2xxx.h - macros for old-style OMAP2xxx "OPP" definitions + * + * Copyright (C) 2005-2009 Texas Instruments, Inc. + * Copyright (C) 2004-2009 Nokia Corporation + * + * Richard Woodruff + * + * The OMAP2 processor can be run at several discrete 'PRCM configurations'. + * These configurations are characterized by voltage and speed for clocks. + * The device is only validated for certain combinations. One way to express + * these combinations is via the 'ratio's' which the clocks operate with + * respect to each other. These ratio sets are for a given voltage/DPLL + * setting. All configurations can be described by a DPLL setting and a ratio + * There are 3 ratio sets for the 2430 and X ratio sets for 2420. + * + * 2430 differs from 2420 in that there are no more phase synchronizers used. + * They both have a slightly different clock domain setup. 2420(iva1,dsp) vs + * 2430 (iva2.1, NOdsp, mdm) + * + * XXX Missing voltage data. + * + * THe format described in this file is deprecated. Once a reasonable + * OPP API exists, the data in this file should be converted to use it. + * + * This is technically part of the OMAP2xxx clock code. + */ + +#ifndef __ARCH_ARM_MACH_OMAP2_OPP2XXX_H +#define __ARCH_ARM_MACH_OMAP2_OPP2XXX_H + +/** + * struct prcm_config - define clock rates on a per-OPP basis (24xx) + * + * Key dividers which make up a PRCM set. Ratio's for a PRCM are mandated. + * xtal_speed, dpll_speed, mpu_speed, CM_CLKSEL_MPU,CM_CLKSEL_DSP + * CM_CLKSEL_GFX, CM_CLKSEL1_CORE, CM_CLKSEL1_PLL CM_CLKSEL2_PLL, CM_CLKSEL_MDM + * + * This is deprecated. As soon as we have a decent OPP API, we should + * move all this stuff to it. + */ +struct prcm_config { + unsigned long xtal_speed; /* crystal rate */ + unsigned long dpll_speed; /* dpll: out*xtal*M/(N-1)table_recalc */ + unsigned long mpu_speed; /* speed of MPU */ + unsigned long cm_clksel_mpu; /* mpu divider */ + unsigned long cm_clksel_dsp; /* dsp+iva1 div(2420), iva2.1(2430) */ + unsigned long cm_clksel_gfx; /* gfx dividers */ + unsigned long cm_clksel1_core; /* major subsystem dividers */ + unsigned long cm_clksel1_pll; /* m,n */ + unsigned long cm_clksel2_pll; /* dpllx1 or x2 out */ + unsigned long cm_clksel_mdm; /* modem dividers 2430 only */ + unsigned long base_sdrc_rfr; /* base refresh timing for a set */ + unsigned char flags; +}; + + +/* Core fields for cm_clksel, not ratio governed */ +#define RX_CLKSEL_DSS1 (0x10 << 8) +#define RX_CLKSEL_DSS2 (0x0 << 13) +#define RX_CLKSEL_SSI (0x5 << 20) + +/*------------------------------------------------------------------------- + * Voltage/DPLL ratios + *-------------------------------------------------------------------------*/ + +/* 2430 Ratio's, 2430-Ratio Config 1 */ +#define R1_CLKSEL_L3 (4 << 0) +#define R1_CLKSEL_L4 (2 << 5) +#define R1_CLKSEL_USB (4 << 25) +#define R1_CM_CLKSEL1_CORE_VAL (R1_CLKSEL_USB | RX_CLKSEL_SSI | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + R1_CLKSEL_L4 | R1_CLKSEL_L3) +#define R1_CLKSEL_MPU (2 << 0) +#define R1_CM_CLKSEL_MPU_VAL R1_CLKSEL_MPU +#define R1_CLKSEL_DSP (2 << 0) +#define R1_CLKSEL_DSP_IF (2 << 5) +#define R1_CM_CLKSEL_DSP_VAL (R1_CLKSEL_DSP | R1_CLKSEL_DSP_IF) +#define R1_CLKSEL_GFX (2 << 0) +#define R1_CM_CLKSEL_GFX_VAL R1_CLKSEL_GFX +#define R1_CLKSEL_MDM (4 << 0) +#define R1_CM_CLKSEL_MDM_VAL R1_CLKSEL_MDM + +/* 2430-Ratio Config 2 */ +#define R2_CLKSEL_L3 (6 << 0) +#define R2_CLKSEL_L4 (2 << 5) +#define R2_CLKSEL_USB (2 << 25) +#define R2_CM_CLKSEL1_CORE_VAL (R2_CLKSEL_USB | RX_CLKSEL_SSI | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + R2_CLKSEL_L4 | R2_CLKSEL_L3) +#define R2_CLKSEL_MPU (2 << 0) +#define R2_CM_CLKSEL_MPU_VAL R2_CLKSEL_MPU +#define R2_CLKSEL_DSP (2 << 0) +#define R2_CLKSEL_DSP_IF (3 << 5) +#define R2_CM_CLKSEL_DSP_VAL (R2_CLKSEL_DSP | R2_CLKSEL_DSP_IF) +#define R2_CLKSEL_GFX (2 << 0) +#define R2_CM_CLKSEL_GFX_VAL R2_CLKSEL_GFX +#define R2_CLKSEL_MDM (6 << 0) +#define R2_CM_CLKSEL_MDM_VAL R2_CLKSEL_MDM + +/* 2430-Ratio Bootm (BYPASS) */ +#define RB_CLKSEL_L3 (1 << 0) +#define RB_CLKSEL_L4 (1 << 5) +#define RB_CLKSEL_USB (1 << 25) +#define RB_CM_CLKSEL1_CORE_VAL (RB_CLKSEL_USB | RX_CLKSEL_SSI | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + RB_CLKSEL_L4 | RB_CLKSEL_L3) +#define RB_CLKSEL_MPU (1 << 0) +#define RB_CM_CLKSEL_MPU_VAL RB_CLKSEL_MPU +#define RB_CLKSEL_DSP (1 << 0) +#define RB_CLKSEL_DSP_IF (1 << 5) +#define RB_CM_CLKSEL_DSP_VAL (RB_CLKSEL_DSP | RB_CLKSEL_DSP_IF) +#define RB_CLKSEL_GFX (1 << 0) +#define RB_CM_CLKSEL_GFX_VAL RB_CLKSEL_GFX +#define RB_CLKSEL_MDM (1 << 0) +#define RB_CM_CLKSEL_MDM_VAL RB_CLKSEL_MDM + +/* 2420 Ratio Equivalents */ +#define RXX_CLKSEL_VLYNQ (0x12 << 15) +#define RXX_CLKSEL_SSI (0x8 << 20) + +/* 2420-PRCM III 532MHz core */ +#define RIII_CLKSEL_L3 (4 << 0) /* 133MHz */ +#define RIII_CLKSEL_L4 (2 << 5) /* 66.5MHz */ +#define RIII_CLKSEL_USB (4 << 25) /* 33.25MHz */ +#define RIII_CM_CLKSEL1_CORE_VAL (RIII_CLKSEL_USB | RXX_CLKSEL_SSI | \ + RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \ + RX_CLKSEL_DSS1 | RIII_CLKSEL_L4 | \ + RIII_CLKSEL_L3) +#define RIII_CLKSEL_MPU (2 << 0) /* 266MHz */ +#define RIII_CM_CLKSEL_MPU_VAL RIII_CLKSEL_MPU +#define RIII_CLKSEL_DSP (3 << 0) /* c5x - 177.3MHz */ +#define RIII_CLKSEL_DSP_IF (2 << 5) /* c5x - 88.67MHz */ +#define RIII_SYNC_DSP (1 << 7) /* Enable sync */ +#define RIII_CLKSEL_IVA (6 << 8) /* iva1 - 88.67MHz */ +#define RIII_SYNC_IVA (1 << 13) /* Enable sync */ +#define RIII_CM_CLKSEL_DSP_VAL (RIII_SYNC_IVA | RIII_CLKSEL_IVA | \ + RIII_SYNC_DSP | RIII_CLKSEL_DSP_IF | \ + RIII_CLKSEL_DSP) +#define RIII_CLKSEL_GFX (2 << 0) /* 66.5MHz */ +#define RIII_CM_CLKSEL_GFX_VAL RIII_CLKSEL_GFX + +/* 2420-PRCM II 600MHz core */ +#define RII_CLKSEL_L3 (6 << 0) /* 100MHz */ +#define RII_CLKSEL_L4 (2 << 5) /* 50MHz */ +#define RII_CLKSEL_USB (2 << 25) /* 50MHz */ +#define RII_CM_CLKSEL1_CORE_VAL (RII_CLKSEL_USB | RXX_CLKSEL_SSI | \ + RXX_CLKSEL_VLYNQ | RX_CLKSEL_DSS2 | \ + RX_CLKSEL_DSS1 | RII_CLKSEL_L4 | \ + RII_CLKSEL_L3) +#define RII_CLKSEL_MPU (2 << 0) /* 300MHz */ +#define RII_CM_CLKSEL_MPU_VAL RII_CLKSEL_MPU +#define RII_CLKSEL_DSP (3 << 0) /* c5x - 200MHz */ +#define RII_CLKSEL_DSP_IF (2 << 5) /* c5x - 100MHz */ +#define RII_SYNC_DSP (0 << 7) /* Bypass sync */ +#define RII_CLKSEL_IVA (3 << 8) /* iva1 - 200MHz */ +#define RII_SYNC_IVA (0 << 13) /* Bypass sync */ +#define RII_CM_CLKSEL_DSP_VAL (RII_SYNC_IVA | RII_CLKSEL_IVA | \ + RII_SYNC_DSP | RII_CLKSEL_DSP_IF | \ + RII_CLKSEL_DSP) +#define RII_CLKSEL_GFX (2 << 0) /* 50MHz */ +#define RII_CM_CLKSEL_GFX_VAL RII_CLKSEL_GFX + +/* 2420-PRCM I 660MHz core */ +#define RI_CLKSEL_L3 (4 << 0) /* 165MHz */ +#define RI_CLKSEL_L4 (2 << 5) /* 82.5MHz */ +#define RI_CLKSEL_USB (4 << 25) /* 41.25MHz */ +#define RI_CM_CLKSEL1_CORE_VAL (RI_CLKSEL_USB | \ + RXX_CLKSEL_SSI | RXX_CLKSEL_VLYNQ | \ + RX_CLKSEL_DSS2 | RX_CLKSEL_DSS1 | \ + RI_CLKSEL_L4 | RI_CLKSEL_L3) +#define RI_CLKSEL_MPU (2 << 0) /* 330MHz */ +#define RI_CM_CLKSEL_MPU_VAL RI_CLKSEL_MPU +#define RI_CLKSEL_DSP (3 << 0) /* c5x - 220MHz */ +#define RI_CLKSEL_DSP_IF (2 << 5) /* c5x - 110MHz */ +#define RI_SYNC_DSP (1 << 7) /* Activate sync */ +#define RI_CLKSEL_IVA (4 << 8) /* iva1 - 165MHz */ +#define RI_SYNC_IVA (0 << 13) /* Bypass sync */ +#define RI_CM_CLKSEL_DSP_VAL (RI_SYNC_IVA | RI_CLKSEL_IVA | \ + RI_SYNC_DSP | RI_CLKSEL_DSP_IF | \ + RI_CLKSEL_DSP) +#define RI_CLKSEL_GFX (1 << 0) /* 165MHz */ +#define RI_CM_CLKSEL_GFX_VAL RI_CLKSEL_GFX + +/* 2420-PRCM VII (boot) */ +#define RVII_CLKSEL_L3 (1 << 0) +#define RVII_CLKSEL_L4 (1 << 5) +#define RVII_CLKSEL_DSS1 (1 << 8) +#define RVII_CLKSEL_DSS2 (0 << 13) +#define RVII_CLKSEL_VLYNQ (1 << 15) +#define RVII_CLKSEL_SSI (1 << 20) +#define RVII_CLKSEL_USB (1 << 25) + +#define RVII_CM_CLKSEL1_CORE_VAL (RVII_CLKSEL_USB | RVII_CLKSEL_SSI | \ + RVII_CLKSEL_VLYNQ | \ + RVII_CLKSEL_DSS2 | RVII_CLKSEL_DSS1 | \ + RVII_CLKSEL_L4 | RVII_CLKSEL_L3) + +#define RVII_CLKSEL_MPU (1 << 0) /* all divide by 1 */ +#define RVII_CM_CLKSEL_MPU_VAL RVII_CLKSEL_MPU + +#define RVII_CLKSEL_DSP (1 << 0) +#define RVII_CLKSEL_DSP_IF (1 << 5) +#define RVII_SYNC_DSP (0 << 7) +#define RVII_CLKSEL_IVA (1 << 8) +#define RVII_SYNC_IVA (0 << 13) +#define RVII_CM_CLKSEL_DSP_VAL (RVII_SYNC_IVA | RVII_CLKSEL_IVA | \ + RVII_SYNC_DSP | RVII_CLKSEL_DSP_IF | \ + RVII_CLKSEL_DSP) + +#define RVII_CLKSEL_GFX (1 << 0) +#define RVII_CM_CLKSEL_GFX_VAL RVII_CLKSEL_GFX + +/*------------------------------------------------------------------------- + * 2430 Target modes: Along with each configuration the CPU has several + * modes which goes along with them. Modes mainly are the addition of + * describe DPLL combinations to go along with a ratio. + *-------------------------------------------------------------------------*/ + +/* Hardware governed */ +#define MX_48M_SRC (0 << 3) +#define MX_54M_SRC (0 << 5) +#define MX_APLLS_CLIKIN_12 (3 << 23) +#define MX_APLLS_CLIKIN_13 (2 << 23) +#define MX_APLLS_CLIKIN_19_2 (0 << 23) + +/* + * 2430 - standalone, 2*ref*M/(n+1), M/N is for exactness not relock speed + * #5a (ratio1) baseport-target, target DPLL = 266*2 = 532MHz + */ +#define M5A_DPLL_MULT_12 (133 << 12) +#define M5A_DPLL_DIV_12 (5 << 8) +#define M5A_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + M5A_DPLL_DIV_12 | M5A_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) +#define M5A_DPLL_MULT_13 (61 << 12) +#define M5A_DPLL_DIV_13 (2 << 8) +#define M5A_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + M5A_DPLL_DIV_13 | M5A_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13) +#define M5A_DPLL_MULT_19 (55 << 12) +#define M5A_DPLL_DIV_19 (3 << 8) +#define M5A_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ + M5A_DPLL_DIV_19 | M5A_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2) +/* #5b (ratio1) target DPLL = 200*2 = 400MHz */ +#define M5B_DPLL_MULT_12 (50 << 12) +#define M5B_DPLL_DIV_12 (2 << 8) +#define M5B_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + M5B_DPLL_DIV_12 | M5B_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) +#define M5B_DPLL_MULT_13 (200 << 12) +#define M5B_DPLL_DIV_13 (12 << 8) + +#define M5B_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + M5B_DPLL_DIV_13 | M5B_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13) +#define M5B_DPLL_MULT_19 (125 << 12) +#define M5B_DPLL_DIV_19 (31 << 8) +#define M5B_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ + M5B_DPLL_DIV_19 | M5B_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2) +/* + * #4 (ratio2), DPLL = 399*2 = 798MHz, L3=133MHz + */ +#define M4_DPLL_MULT_12 (133 << 12) +#define M4_DPLL_DIV_12 (3 << 8) +#define M4_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + M4_DPLL_DIV_12 | M4_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) + +#define M4_DPLL_MULT_13 (399 << 12) +#define M4_DPLL_DIV_13 (12 << 8) +#define M4_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + M4_DPLL_DIV_13 | M4_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13) + +#define M4_DPLL_MULT_19 (145 << 12) +#define M4_DPLL_DIV_19 (6 << 8) +#define M4_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ + M4_DPLL_DIV_19 | M4_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2) + +/* + * #3 (ratio2) baseport-target, target DPLL = 330*2 = 660MHz + */ +#define M3_DPLL_MULT_12 (55 << 12) +#define M3_DPLL_DIV_12 (1 << 8) +#define M3_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + M3_DPLL_DIV_12 | M3_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) +#define M3_DPLL_MULT_13 (76 << 12) +#define M3_DPLL_DIV_13 (2 << 8) +#define M3_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + M3_DPLL_DIV_13 | M3_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13) +#define M3_DPLL_MULT_19 (17 << 12) +#define M3_DPLL_DIV_19 (0 << 8) +#define M3_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ + M3_DPLL_DIV_19 | M3_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2) + +/* + * #2 (ratio1) DPLL = 330*2 = 660MHz, L3=165MHz + */ +#define M2_DPLL_MULT_12 (55 << 12) +#define M2_DPLL_DIV_12 (1 << 8) +#define M2_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + M2_DPLL_DIV_12 | M2_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) + +/* Speed changes - Used 658.7MHz instead of 660MHz for LP-Refresh M=76 N=2, + * relock time issue */ +/* Core frequency changed from 330/165 to 329/164 MHz*/ +#define M2_DPLL_MULT_13 (76 << 12) +#define M2_DPLL_DIV_13 (2 << 8) +#define M2_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + M2_DPLL_DIV_13 | M2_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13) + +#define M2_DPLL_MULT_19 (17 << 12) +#define M2_DPLL_DIV_19 (0 << 8) +#define M2_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ + M2_DPLL_DIV_19 | M2_DPLL_MULT_19 | \ + MX_APLLS_CLIKIN_19_2) + +/* boot (boot) */ +#define MB_DPLL_MULT (1 << 12) +#define MB_DPLL_DIV (0 << 8) +#define MB_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + MB_DPLL_DIV | MB_DPLL_MULT | \ + MX_APLLS_CLIKIN_12) + +#define MB_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + MB_DPLL_DIV | MB_DPLL_MULT | \ + MX_APLLS_CLIKIN_13) + +#define MB_CM_CLKSEL1_PLL_19_VAL (MX_48M_SRC | MX_54M_SRC | \ + MB_DPLL_DIV | MB_DPLL_MULT | \ + MX_APLLS_CLIKIN_19) + +/* + * 2430 - chassis (sedna) + * 165 (ratio1) same as above #2 + * 150 (ratio1) + * 133 (ratio2) same as above #4 + * 110 (ratio2) same as above #3 + * 104 (ratio2) + * boot (boot) + */ + +/* PRCM I target DPLL = 2*330MHz = 660MHz */ +#define MI_DPLL_MULT_12 (55 << 12) +#define MI_DPLL_DIV_12 (1 << 8) +#define MI_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + MI_DPLL_DIV_12 | MI_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) + +/* + * 2420 Equivalent - mode registers + * PRCM II , target DPLL = 2*300MHz = 600MHz + */ +#define MII_DPLL_MULT_12 (50 << 12) +#define MII_DPLL_DIV_12 (1 << 8) +#define MII_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + MII_DPLL_DIV_12 | MII_DPLL_MULT_12 | \ + MX_APLLS_CLIKIN_12) +#define MII_DPLL_MULT_13 (300 << 12) +#define MII_DPLL_DIV_13 (12 << 8) +#define MII_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + MII_DPLL_DIV_13 | MII_DPLL_MULT_13 | \ + MX_APLLS_CLIKIN_13) + +/* PRCM III target DPLL = 2*266 = 532MHz*/ +#define MIII_DPLL_MULT_12 (133 << 12) +#define MIII_DPLL_DIV_12 (5 << 8) +#define MIII_CM_CLKSEL1_PLL_12_VAL (MX_48M_SRC | MX_54M_SRC | \ + MIII_DPLL_DIV_12 | \ + MIII_DPLL_MULT_12 | MX_APLLS_CLIKIN_12) +#define MIII_DPLL_MULT_13 (266 << 12) +#define MIII_DPLL_DIV_13 (12 << 8) +#define MIII_CM_CLKSEL1_PLL_13_VAL (MX_48M_SRC | MX_54M_SRC | \ + MIII_DPLL_DIV_13 | \ + MIII_DPLL_MULT_13 | MX_APLLS_CLIKIN_13) + +/* PRCM VII (boot bypass) */ +#define MVII_CM_CLKSEL1_PLL_12_VAL MB_CM_CLKSEL1_PLL_12_VAL +#define MVII_CM_CLKSEL1_PLL_13_VAL MB_CM_CLKSEL1_PLL_13_VAL + +/* High and low operation value */ +#define MX_CLKSEL2_PLL_2x_VAL (2 << 0) +#define MX_CLKSEL2_PLL_1x_VAL (1 << 0) + +/* MPU speed defines */ +#define S12M 12000000 +#define S13M 13000000 +#define S19M 19200000 +#define S26M 26000000 +#define S100M 100000000 +#define S133M 133000000 +#define S150M 150000000 +#define S164M 164000000 +#define S165M 165000000 +#define S199M 199000000 +#define S200M 200000000 +#define S266M 266000000 +#define S300M 300000000 +#define S329M 329000000 +#define S330M 330000000 +#define S399M 399000000 +#define S400M 400000000 +#define S532M 532000000 +#define S600M 600000000 +#define S658M 658000000 +#define S660M 660000000 +#define S798M 798000000 + + +extern const struct prcm_config omap2420_rate_table[]; +extern const struct prcm_config omap2430_rate_table[]; +extern const struct prcm_config *rate_table; +extern const struct prcm_config *curr_prcm_set; + +#endif diff --git a/arch/arm/mach-omap2/sdrc.h b/arch/arm/mach-omap2/sdrc.h index 12fc7dafec2b..68f57bb67fc5 100644 --- a/arch/arm/mach-omap2/sdrc.h +++ b/arch/arm/mach-omap2/sdrc.h @@ -18,6 +18,9 @@ #include #ifndef __ASSEMBLER__ + +#include + extern void __iomem *omap2_sdrc_base; extern void __iomem *omap2_sms_base; diff --git a/arch/arm/plat-omap/include/plat/clock.h b/arch/arm/plat-omap/include/plat/clock.h index 4b8b0d65cbf2..00310f21e84f 100644 --- a/arch/arm/plat-omap/include/plat/clock.h +++ b/arch/arm/plat-omap/include/plat/clock.h @@ -13,6 +13,8 @@ #ifndef __ARCH_ARM_OMAP_CLOCK_H #define __ARCH_ARM_OMAP_CLOCK_H +#include + struct module; struct clk; struct clockdomain; -- 2.30.2