From d491b27b1959565671e2c05dff09b5f535a854ce Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 17 Apr 2007 23:44:07 +0900 Subject: [PATCH] libata: convert native PCI host handling to new init model Convert native PCI host handling to alloc-init-register model. New function ata_pci_init_native_host() follows the new init model and replaces ata_pci_init_native_mode(). As there are remaining LLD users, the old function isn't removed yet. ata_pci_init_one() is reimplemented using the new function and now fully converted to new init model. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik --- drivers/ata/libata-core.c | 1 + drivers/ata/libata-sff.c | 151 +++++++++++++++++++++++++------------- include/linux/libata.h | 2 + 3 files changed, 104 insertions(+), 50 deletions(-) diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index ab189d3b84d3..8d3ae66572e9 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -6726,6 +6726,7 @@ EXPORT_SYMBOL_GPL(ata_timing_merge); #ifdef CONFIG_PCI EXPORT_SYMBOL_GPL(pci_test_config_bits); EXPORT_SYMBOL_GPL(ata_pci_init_native_mode); +EXPORT_SYMBOL_GPL(ata_pci_init_native_host); EXPORT_SYMBOL_GPL(ata_pci_init_one); EXPORT_SYMBOL_GPL(ata_pci_remove_one); #ifdef CONFIG_PM diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index d48e1544a0bb..d551fa1cb104 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -678,6 +678,70 @@ static int ata_pci_init_bmdma(struct ata_host *host) return 0; } +/** + * ata_pci_init_native_host - acquire native ATA resources and init host + * @host: target ATA host + * @port_mask: ports to consider + * + * Acquire native PCI ATA resources for @host and initialize + * @host accordoingly. + * + * LOCKING: + * Inherited from calling layer (may sleep). + * + * RETURNS: + * 0 on success, -errno otherwise. + */ +int ata_pci_init_native_host(struct ata_host *host, unsigned int port_mask) +{ + struct device *gdev = host->dev; + struct pci_dev *pdev = to_pci_dev(gdev); + int i, rc; + + /* Discard disabled ports. Some controllers show their unused + * channels this way. Disabled ports are made dummy. + */ + for (i = 0; i < 2; i++) { + if ((port_mask & (1 << i)) && !ata_resources_present(pdev, i)) { + host->ports[i]->ops = &ata_dummy_port_ops; + port_mask &= ~(1 << i); + } + } + + if (!port_mask) { + dev_printk(KERN_ERR, gdev, "no available port\n"); + return -ENODEV; + } + + /* request, iomap BARs and init port addresses accordingly */ + for (i = 0; i < 2; i++) { + struct ata_port *ap = host->ports[i]; + int base = i * 2; + void __iomem * const *iomap; + + if (!(port_mask & (1 << i))) + continue; + + rc = pcim_iomap_regions(pdev, 0x3 << base, DRV_NAME); + if (rc) { + dev_printk(KERN_ERR, gdev, "failed to request/iomap " + "BARs for port %d (errno=%d)\n", i, rc); + if (rc == -EBUSY) + pcim_pin_device(pdev); + return rc; + } + host->iomap = iomap = pcim_iomap_table(pdev); + + ap->ioaddr.cmd_addr = iomap[base]; + ap->ioaddr.altstatus_addr = + ap->ioaddr.ctl_addr = (void __iomem *) + ((unsigned long)iomap[base + 1] | ATA_PCI_CTL_OFS); + ata_std_ports(&ap->ioaddr); + } + + return 0; +} + struct ata_legacy_devres { unsigned int mask; unsigned long cmd_port[2]; @@ -917,7 +981,6 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, unsigned int n_ports) { struct device *dev = &pdev->dev; - struct ata_probe_ent *probe_ent = NULL; struct ata_host *host = NULL; const struct ata_port_info *port[2]; u8 mask; @@ -943,7 +1006,7 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, Checking dev->is_enabled is insufficient as this is not set at boot for the primary video which is BIOS enabled - */ + */ rc = pcim_enable_device(pdev); if (rc) @@ -969,30 +1032,28 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, #endif } + /* alloc and init host */ + host = ata_host_alloc_pinfo(dev, port, 2); + if (!host) { + dev_printk(KERN_ERR, &pdev->dev, + "failed to allocate ATA host\n"); + rc = -ENOMEM; + goto err_out; + } + if (!legacy_mode) { - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) { - pcim_pin_device(pdev); - goto err_out; - } + unsigned int port_mask; - /* TODO: If we get no DMA mask we should fall back to PIO */ - rc = pci_set_dma_mask(pdev, ATA_DMA_MASK); - if (rc) - goto err_out; - rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK); + port_mask = ATA_PORT_PRIMARY; + if (n_ports > 1) + port_mask |= ATA_PORT_SECONDARY; + + rc = ata_pci_init_native_host(host, port_mask); if (rc) goto err_out; - - pci_set_master(pdev); } else { int was_busy = 0; - rc = -ENOMEM; - host = ata_host_alloc_pinfo(dev, port, 2); - if (!host) - goto err_out; - rc = ata_init_legacy_host(host, &legacy_mode, &was_busy); if (was_busy) pcim_pin_device(pdev); @@ -1002,47 +1063,37 @@ int ata_pci_init_one (struct pci_dev *pdev, struct ata_port_info **port_info, /* request respective PCI regions, may fail */ rc = pci_request_region(pdev, 1, DRV_NAME); rc = pci_request_region(pdev, 3, DRV_NAME); - - /* init bmdma */ - ata_pci_init_bmdma(host); - pci_set_master(pdev); } - if (legacy_mode) { + /* init BMDMA, may fail */ + ata_pci_init_bmdma(host); + pci_set_master(pdev); + + /* start host and request IRQ */ + rc = ata_host_start(host); + if (rc) + goto err_out; + + if (!legacy_mode) + rc = devm_request_irq(dev, pdev->irq, + port_info[0]->port_ops->irq_handler, + IRQF_SHARED, DRV_NAME, host); + else { irq_handler_t handler[2] = { host->ops->irq_handler, host->ops->irq_handler }; unsigned int irq_flags[2] = { IRQF_SHARED, IRQF_SHARED }; void *dev_id[2] = { host, host }; - rc = ata_host_start(host); - if (rc) - goto err_out; - rc = ata_request_legacy_irqs(host, handler, irq_flags, dev_id); - if (rc) - goto err_out; - - rc = ata_host_register(host, port_info[0]->sht); - if (rc) - goto err_out; - } else { - if (n_ports == 2) - probe_ent = ata_pci_init_native_mode(pdev, (struct ata_port_info **)port, ATA_PORT_PRIMARY | ATA_PORT_SECONDARY); - else - probe_ent = ata_pci_init_native_mode(pdev, (struct ata_port_info **)port, ATA_PORT_PRIMARY); - - if (!probe_ent) { - rc = -ENOMEM; - goto err_out; - } + } + if (rc) + goto err_out; - if (!ata_device_add(probe_ent)) { - rc = -ENODEV; - goto err_out; - } + /* register */ + rc = ata_host_register(host, port_info[0]->sht); + if (rc) + goto err_out; - devm_kfree(dev, probe_ent); - } devres_remove_group(dev, NULL); return 0; diff --git a/include/linux/libata.h b/include/linux/libata.h index 300daf6c50d0..400429f9cd9d 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -892,6 +892,8 @@ struct pci_bits { extern struct ata_probe_ent * ata_pci_init_native_mode(struct pci_dev *pdev, struct ata_port_info **port, int portmask); +extern int ata_pci_init_native_host(struct ata_host *host, + unsigned int port_mask); extern int pci_test_config_bits(struct pci_dev *pdev, const struct pci_bits *bits); extern unsigned long ata_pci_default_filter(struct ata_device *, unsigned long); #endif /* CONFIG_PCI */ -- 2.30.2