From d3dec96e401cc66d7280732558d711ac2ee7a531 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Mon, 27 Aug 2012 16:03:14 +0200 Subject: [PATCH] tty: serial: mpc5xxx: add support for mark/space parity Tested on a custom MPC5200B-board using some fancy industrial protocol. Verified that MPC512x has identical bits, so should work there as well. Signed-off-by: Wolfram Sang Acked-by: Anatolij Gustschin Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/mpc52xx_uart.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c index bedac0d4c9ce..f19d04ed8586 100644 --- a/drivers/tty/serial/mpc52xx_uart.c +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -775,11 +775,15 @@ mpc52xx_uart_set_termios(struct uart_port *port, struct ktermios *new, } if (new->c_cflag & PARENB) { + if (new->c_cflag & CMSPAR) + mr1 |= MPC52xx_PSC_MODE_PARFORCE; + + /* With CMSPAR, PARODD also means high parity (same as termios) */ mr1 |= (new->c_cflag & PARODD) ? MPC52xx_PSC_MODE_PARODD : MPC52xx_PSC_MODE_PAREVEN; - } else + } else { mr1 |= MPC52xx_PSC_MODE_PARNONE; - + } mr2 = 0; -- 2.30.2