From d1c9e5b37901b53ffc1ce3f08ec8ed61bfd557b6 Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Tue, 22 Sep 2009 13:40:44 +0200 Subject: [PATCH] fsl_i2c: Do not generate STOP after read. __i2c_read always ends with a STOP condition thereby releasing the bus. It is cleaner to do the STOP magic in i2c_read(), like i2c_write() does. This may also help future multimaster systems which wants to hold on to the bus until all transactions are finished. Signed-off-by: Joakim Tjernlund --- drivers/i2c/fsl_i2c.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c index 4d5552bcd5..2241990f94 100644 --- a/drivers/i2c/fsl_i2c.c +++ b/drivers/i2c/fsl_i2c.c @@ -353,9 +353,10 @@ __i2c_read(u8 *data, int length) writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_TXAK, &i2c_dev[i2c_bus_num]->cr); - /* Generate stop on last byte */ + /* Do not generate stop on last byte */ if (i == length - 1) - writeb(I2C_CR_MEN | I2C_CR_TXAK, &i2c_dev[i2c_bus_num]->cr); + writeb(I2C_CR_MEN | I2C_CR_MSTA | I2C_CR_MTX, + &i2c_dev[i2c_bus_num]->cr); data[i] = readb(&i2c_dev[i2c_bus_num]->dr); } @@ -378,11 +379,11 @@ i2c_read(u8 dev, uint addr, int alen, u8 *data, int length) && i2c_write_addr(dev, I2C_READ_BIT, 1) != 0) i = __i2c_read(data, length); - if (length && i2c_wait4bus()) /* Wait until STOP */ - debug("i2c_read: wait4bus timed out\n"); - writeb(I2C_CR_MEN, &i2c_dev[i2c_bus_num]->cr); + if (i2c_wait4bus()) /* Wait until STOP */ + debug("i2c_read: wait4bus timed out\n"); + if (i == length) return 0; -- 2.30.2