From d17ba0f616a08f597d9348c372d89b8c0405ccf3 Mon Sep 17 00:00:00 2001 From: Konstantin Khlebnikov Date: Wed, 17 Apr 2019 11:13:20 +0300 Subject: [PATCH] e1000e: start network tx queue only when link is up Driver does not want to keep packets in Tx queue when link is lost. But present code only reset NIC to flush them, but does not prevent queuing new packets. Moreover reset sequence itself could generate new packets via netconsole and NIC falls into endless reset loop. This patch wakes Tx queue only when NIC is ready to send packets. This is proper fix for problem addressed by commit 0f9e980bf5ee ("e1000e: fix cyclic resets at link up with active tx"). Signed-off-by: Konstantin Khlebnikov Suggested-by: Alexander Duyck Tested-by: Joseph Yasi Tested-by: Aaron Brown Tested-by: Oleksandr Natalenko Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/e1000e/netdev.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index e21b2ffd1e92..b081a1ef6859 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -4208,7 +4208,7 @@ void e1000e_up(struct e1000_adapter *adapter) e1000_configure_msix(adapter); e1000_irq_enable(adapter); - netif_start_queue(adapter->netdev); + /* Tx queue started by watchdog timer when link is up */ e1000e_trigger_lsc(adapter); } @@ -4606,6 +4606,7 @@ int e1000e_open(struct net_device *netdev) pm_runtime_get_sync(&pdev->dev); netif_carrier_off(netdev); + netif_stop_queue(netdev); /* allocate transmit descriptors */ err = e1000e_setup_tx_resources(adapter->tx_ring); @@ -4666,7 +4667,6 @@ int e1000e_open(struct net_device *netdev) e1000_irq_enable(adapter); adapter->tx_hang_recheck = false; - netif_start_queue(netdev); hw->mac.get_link_status = true; pm_runtime_put(&pdev->dev); @@ -5288,6 +5288,7 @@ static void e1000_watchdog_task(struct work_struct *work) if (phy->ops.cfg_on_link_up) phy->ops.cfg_on_link_up(hw); + netif_wake_queue(netdev); netif_carrier_on(netdev); if (!test_bit(__E1000_DOWN, &adapter->state)) @@ -5301,6 +5302,7 @@ static void e1000_watchdog_task(struct work_struct *work) /* Link status message must follow this format */ pr_info("%s NIC Link is Down\n", adapter->netdev->name); netif_carrier_off(netdev); + netif_stop_queue(netdev); if (!test_bit(__E1000_DOWN, &adapter->state)) mod_timer(&adapter->phy_info_timer, round_jiffies(jiffies + 2 * HZ)); -- 2.30.2