From d14c28fc80d98cc712074c869cbd1659398e8829 Mon Sep 17 00:00:00 2001 From: =?utf8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= Date: Thu, 15 Sep 2016 08:10:55 +0200 Subject: [PATCH] kernel: update kernel 4.4 to version 4.4.20 MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit Refresh patches for all targets that support kernel 4.4. Compile-tested on brcm2708 only. Signed-off-by: Álvaro Fernández Rojas --- include/kernel-version.mk | 4 +- ...t-IDE-trigger-to-common-disk-trigger.patch | 39 +++++-------------- ...50-gpio-nxp-74hc153-gpio-chip-driver.patch | 2 +- ...x164-improve-platform-device-support.patch | 2 +- .../452-gpio-add-gpio-latch-driver.patch | 2 +- ...c-Disable-frame-filtering-completely.patch | 5 --- ...c-Disable-frame-filtering-completely.patch | 5 --- .../ath25/patches-4.4/107-ar5312_gpio.patch | 2 +- .../ath25/patches-4.4/108-ar2315_gpio.patch | 2 +- .../patches-4.4/0029-Add-dwc_otg-driver.patch | 2 +- ...bcm2835-virtgpio-Virtual-GPIO-driver.patch | 2 +- ...add-a-simple-GPIO-driver-for-bcm63xx.patch | 2 +- .../cns3xxx/patches-4.4/031-pcie_init.patch | 6 +-- .../110-pci_isolated_interrupts.patch | 4 +- .../810-pci_disable_common_quirks.patch | 6 +-- .../generic/patches-4.4/863-gpiommc.patch | 2 +- .../patches-4.4/904-debloat_dma_buf.patch | 2 +- .../patches-4.4/020-gateworks_i2c_pld.patch | 2 +- .../0032-USB-fix-roothub-for-IFXHCD.patch | 2 +- ...tek-support-MTK-xHCI-host-controller.patch | 4 +- ...2-gpio_mvebu_add_limited_pwm_support.patch | 2 +- ...ost-driver-for-octeon-mmc-controller.patch | 2 +- ...alink-add-gpio-driver-for-ralink-SoC.patch | 2 +- ...IO-ralink-add-mt7621-gpio-controller.patch | 2 +- ...tek-support-MTK-xHCI-host-controller.patch | 4 +- ...IPS-ralink-add-sdhci-for-mt7620a-SoC.patch | 2 +- 26 files changed, 41 insertions(+), 70 deletions(-) diff --git a/include/kernel-version.mk b/include/kernel-version.mk index 150fd3fda0..7804a52908 100644 --- a/include/kernel-version.mk +++ b/include/kernel-version.mk @@ -4,11 +4,11 @@ LINUX_RELEASE?=1 LINUX_VERSION-3.18 = .29 LINUX_VERSION-4.1 = .20 -LINUX_VERSION-4.4 = .19 +LINUX_VERSION-4.4 = .20 LINUX_KERNEL_MD5SUM-3.18.29 = b25737a0bc98e80d12200de93f239c28 LINUX_KERNEL_MD5SUM-4.1.20 = 075c38a3a23ca5bc80437b13606df00a -LINUX_KERNEL_MD5SUM-4.4.19 = 03dfcd3522015afde8d7a5c0b6e5d6b6 +LINUX_KERNEL_MD5SUM-4.4.20 = c66bec8499919b3058d4792c12c4e98c ifdef KERNEL_PATCHVER LINUX_VERSION:=$(KERNEL_PATCHVER)$(strip $(LINUX_VERSION-$(KERNEL_PATCHVER))) diff --git a/target/linux/apm821xx/patches-4.4/040-backport_leds-convert-IDE-trigger-to-common-disk-trigger.patch b/target/linux/apm821xx/patches-4.4/040-backport_leds-convert-IDE-trigger-to-common-disk-trigger.patch index 2331e29fd8..4e0be8d5ad 100644 --- a/target/linux/apm821xx/patches-4.4/040-backport_leds-convert-IDE-trigger-to-common-disk-trigger.patch +++ b/target/linux/apm821xx/patches-4.4/040-backport_leds-convert-IDE-trigger-to-common-disk-trigger.patch @@ -37,19 +37,17 @@ Signed-off-by: Jacek Anaszewski create mode 100644 drivers/leds/trigger/ledtrig-disk.c delete mode 100644 drivers/leds/trigger/ledtrig-ide-disk.c -diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c -index 6be7770..2eca572 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c -@@ -69,6 +69,7 @@ - #include +@@ -67,6 +67,7 @@ + #include #include #include +#include #include #include -@@ -5072,6 +5073,9 @@ void ata_qc_complete(struct ata_queued_cmd *qc) +@@ -4914,6 +4915,9 @@ void ata_qc_complete(struct ata_queued_c { struct ata_port *ap = qc->ap; @@ -59,11 +57,9 @@ index 6be7770..2eca572 100644 /* XXX: New EH and old EH use different mechanisms to * synchronize EH with regular execution path. * -diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c -index 05dbcce..5ceb176 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c -@@ -186,7 +186,7 @@ static ide_startstop_t ide_do_rw_disk(ide_drive_t *drive, struct request *rq, +@@ -186,7 +186,7 @@ static ide_startstop_t ide_do_rw_disk(id BUG_ON(drive->dev_flags & IDE_DFLAG_BLOCKED); BUG_ON(rq->cmd_type != REQ_TYPE_FS); @@ -72,8 +68,6 @@ index 05dbcce..5ceb176 100644 pr_debug("%s: %sing: block=%llu, sectors=%u\n", drive->name, rq_data_dir(rq) == READ ? "read" : "writ", -diff --git a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig -index 9893d91..3f9ddb9 100644 --- a/drivers/leds/trigger/Kconfig +++ b/drivers/leds/trigger/Kconfig @@ -33,12 +33,12 @@ config LEDS_TRIGGER_ONESHOT @@ -92,9 +86,7 @@ index 9893d91..3f9ddb9 100644 + This allows LEDs to be controlled by disk activity. If unsure, say Y. - config LEDS_TRIGGER_MTD -diff --git a/drivers/leds/trigger/Makefile b/drivers/leds/trigger/Makefile -index 8cc64a4..a72c43c 100644 + config LEDS_TRIGGER_HEARTBEAT --- a/drivers/leds/trigger/Makefile +++ b/drivers/leds/trigger/Makefile @@ -1,6 +1,6 @@ @@ -104,10 +96,7 @@ index 8cc64a4..a72c43c 100644 +obj-$(CONFIG_LEDS_TRIGGER_DISK) += ledtrig-disk.o obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT) += ledtrig-heartbeat.o obj-$(CONFIG_LEDS_TRIGGER_BACKLIGHT) += ledtrig-backlight.o - obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o -diff --git a/drivers/leds/trigger/ledtrig-disk.c b/drivers/leds/trigger/ledtrig-disk.c -new file mode 100644 -index 0000000..cd525b4 + obj-$(CONFIG_LEDS_TRIGGER_GPIO) += ledtrig-gpio.o --- /dev/null +++ b/drivers/leds/trigger/ledtrig-disk.c @@ -0,0 +1,41 @@ @@ -152,11 +141,8 @@ index 0000000..cd525b4 + return 0; +} +device_initcall(ledtrig_disk_init); -diff --git a/drivers/leds/trigger/ledtrig-ide-disk.c b/drivers/leds/trigger/ledtrig-ide-disk.c -deleted file mode 100644 -index 15123d3..0000000 ---- a/drivers/leds/trigger/ledtrig-ide-disk.c 2016-07-11 18:31:24.000000000 +0200 -+++ /dev/null 2016-08-08 12:56:55.887448160 +0200 +--- a/drivers/leds/trigger/ledtrig-ide-disk.c ++++ /dev/null @@ -1,47 +0,0 @@ -/* - * LED IDE-Disk Activity Trigger @@ -205,11 +191,9 @@ index 15123d3..0000000 -MODULE_AUTHOR("Richard Purdie "); -MODULE_DESCRIPTION("LED IDE Disk Activity Trigger"); -MODULE_LICENSE("GPL"); -diff --git a/include/linux/leds.h b/include/linux/leds.h -index e5e7f2e..0aa3701 100644 --- a/include/linux/leds.h +++ b/include/linux/leds.h -@@ -325,10 +325,10 @@ static inline void *led_get_trigger_data(struct led_classdev *led_cdev) +@@ -302,10 +302,10 @@ static inline void *led_get_trigger_data #endif /* CONFIG_LEDS_TRIGGERS */ /* Trigger specific functions */ @@ -222,7 +206,4 @@ index e5e7f2e..0aa3701 100644 +static inline void ledtrig_disk_activity(void) {} #endif - #ifdef CONFIG_LEDS_TRIGGER_MTD --- -2.8.1 - + #if defined(CONFIG_LEDS_TRIGGER_CAMERA) || defined(CONFIG_LEDS_TRIGGER_CAMERA_MODULE) diff --git a/target/linux/ar71xx/patches-4.4/450-gpio-nxp-74hc153-gpio-chip-driver.patch b/target/linux/ar71xx/patches-4.4/450-gpio-nxp-74hc153-gpio-chip-driver.patch index 32b624aeae..8bccd12fac 100644 --- a/target/linux/ar71xx/patches-4.4/450-gpio-nxp-74hc153-gpio-chip-driver.patch +++ b/target/linux/ar71xx/patches-4.4/450-gpio-nxp-74hc153-gpio-chip-driver.patch @@ -1,6 +1,6 @@ --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig -@@ -1039,4 +1039,12 @@ config GPIO_VIPERBOARD +@@ -1040,4 +1040,12 @@ config GPIO_VIPERBOARD endmenu diff --git a/target/linux/ar71xx/patches-4.4/451-gpio-74x164-improve-platform-device-support.patch b/target/linux/ar71xx/patches-4.4/451-gpio-74x164-improve-platform-device-support.patch index 028548cd6e..0f7faf280f 100644 --- a/target/linux/ar71xx/patches-4.4/451-gpio-74x164-improve-platform-device-support.patch +++ b/target/linux/ar71xx/patches-4.4/451-gpio-74x164-improve-platform-device-support.patch @@ -99,7 +99,7 @@ +#endif --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig -@@ -990,7 +990,6 @@ menu "SPI GPIO expanders" +@@ -991,7 +991,6 @@ menu "SPI GPIO expanders" config GPIO_74X164 tristate "74x164 serial-in/parallel-out 8-bits shift register" diff --git a/target/linux/ar71xx/patches-4.4/452-gpio-add-gpio-latch-driver.patch b/target/linux/ar71xx/patches-4.4/452-gpio-add-gpio-latch-driver.patch index a65f291a4b..c545252b38 100644 --- a/target/linux/ar71xx/patches-4.4/452-gpio-add-gpio-latch-driver.patch +++ b/target/linux/ar71xx/patches-4.4/452-gpio-add-gpio-latch-driver.patch @@ -1,6 +1,6 @@ --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig -@@ -1046,4 +1046,9 @@ config GPIO_NXP_74HC153 +@@ -1047,4 +1047,9 @@ config GPIO_NXP_74HC153 Platform driver for NXP 74HC153 Dual 4-input Multiplexer. This provides a GPIO interface supporting input mode only. diff --git a/target/linux/arc770/patches-4.4/700-stmmac-Disable-frame-filtering-completely.patch b/target/linux/arc770/patches-4.4/700-stmmac-Disable-frame-filtering-completely.patch index 1c79ed238c..cd66de82b2 100644 --- a/target/linux/arc770/patches-4.4/700-stmmac-Disable-frame-filtering-completely.patch +++ b/target/linux/arc770/patches-4.4/700-stmmac-Disable-frame-filtering-completely.patch @@ -18,8 +18,6 @@ Signed-off-by: Alexey Brodkin drivers/net/ethernet/stmicro/stmmac/common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h -index 623c6ed..6396b81 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -42,7 +42,7 @@ @@ -31,6 +29,3 @@ index 623c6ed..6396b81 100644 /* Extra statistic and debug information exposed by ethtool */ struct stmmac_extra_stats { --- -2.7.4 - diff --git a/target/linux/archs38/patches-4.4/700-stmmac-Disable-frame-filtering-completely.patch b/target/linux/archs38/patches-4.4/700-stmmac-Disable-frame-filtering-completely.patch index 1c79ed238c..cd66de82b2 100644 --- a/target/linux/archs38/patches-4.4/700-stmmac-Disable-frame-filtering-completely.patch +++ b/target/linux/archs38/patches-4.4/700-stmmac-Disable-frame-filtering-completely.patch @@ -18,8 +18,6 @@ Signed-off-by: Alexey Brodkin drivers/net/ethernet/stmicro/stmmac/common.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) -diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h -index 623c6ed..6396b81 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -42,7 +42,7 @@ @@ -31,6 +29,3 @@ index 623c6ed..6396b81 100644 /* Extra statistic and debug information exposed by ethtool */ struct stmmac_extra_stats { --- -2.7.4 - diff --git a/target/linux/ath25/patches-4.4/107-ar5312_gpio.patch b/target/linux/ath25/patches-4.4/107-ar5312_gpio.patch index 13a4393aee..3627cee126 100644 --- a/target/linux/ath25/patches-4.4/107-ar5312_gpio.patch +++ b/target/linux/ath25/patches-4.4/107-ar5312_gpio.patch @@ -52,7 +52,7 @@ if (!ath25_board.radio) --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig -@@ -141,6 +141,13 @@ config GPIO_BRCMSTB +@@ -142,6 +142,13 @@ config GPIO_BRCMSTB help Say yes here to enable GPIO support for Broadcom STB (BCM7XXX) SoCs. diff --git a/target/linux/ath25/patches-4.4/108-ar2315_gpio.patch b/target/linux/ath25/patches-4.4/108-ar2315_gpio.patch index ba9c3f77da..1ec34f79f5 100644 --- a/target/linux/ath25/patches-4.4/108-ar2315_gpio.patch +++ b/target/linux/ath25/patches-4.4/108-ar2315_gpio.patch @@ -75,7 +75,7 @@ * workaround. Attempt to jump to the mips reset location - --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig -@@ -141,6 +141,13 @@ config GPIO_BRCMSTB +@@ -142,6 +142,13 @@ config GPIO_BRCMSTB help Say yes here to enable GPIO support for Broadcom STB (BCM7XXX) SoCs. diff --git a/target/linux/brcm2708/patches-4.4/0029-Add-dwc_otg-driver.patch b/target/linux/brcm2708/patches-4.4/0029-Add-dwc_otg-driver.patch index 57f442cf5f..23da36f553 100644 --- a/target/linux/brcm2708/patches-4.4/0029-Add-dwc_otg-driver.patch +++ b/target/linux/brcm2708/patches-4.4/0029-Add-dwc_otg-driver.patch @@ -659,7 +659,7 @@ dwc_otg: Remove duplicate gadget probe/unregister function } --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c -@@ -4973,7 +4973,7 @@ static void port_event(struct usb_hub *h +@@ -4972,7 +4972,7 @@ static void port_event(struct usb_hub *h if (portchange & USB_PORT_STAT_C_OVERCURRENT) { u16 status = 0, unused; diff --git a/target/linux/brcm2708/patches-4.4/0159-bcm2835-virtgpio-Virtual-GPIO-driver.patch b/target/linux/brcm2708/patches-4.4/0159-bcm2835-virtgpio-Virtual-GPIO-driver.patch index e0bcd93426..aeae6a51b1 100644 --- a/target/linux/brcm2708/patches-4.4/0159-bcm2835-virtgpio-Virtual-GPIO-driver.patch +++ b/target/linux/brcm2708/patches-4.4/0159-bcm2835-virtgpio-Virtual-GPIO-driver.patch @@ -26,7 +26,7 @@ request that the VPU toggles LEDs. CONFIG_W1=m --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig -@@ -132,6 +132,12 @@ config GPIO_BCM_KONA +@@ -133,6 +133,12 @@ config GPIO_BCM_KONA help Turn on GPIO support for Broadcom "Kona" chips. diff --git a/target/linux/brcm63xx/patches-4.4/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch b/target/linux/brcm63xx/patches-4.4/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch index 92b0e7193c..28930d0f9f 100644 --- a/target/linux/brcm63xx/patches-4.4/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch +++ b/target/linux/brcm63xx/patches-4.4/374-gpio-add-a-simple-GPIO-driver-for-bcm63xx.patch @@ -14,7 +14,7 @@ Signed-off-by: Jonas Gorski --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig -@@ -132,6 +132,13 @@ config GPIO_BCM_KONA +@@ -133,6 +133,13 @@ config GPIO_BCM_KONA help Turn on GPIO support for Broadcom "Kona" chips. diff --git a/target/linux/cns3xxx/patches-4.4/031-pcie_init.patch b/target/linux/cns3xxx/patches-4.4/031-pcie_init.patch index 651d1a2f07..52c73d7aee 100644 --- a/target/linux/cns3xxx/patches-4.4/031-pcie_init.patch +++ b/target/linux/cns3xxx/patches-4.4/031-pcie_init.patch @@ -1,6 +1,6 @@ --- a/arch/arm/mach-cns3xxx/laguna.c +++ b/arch/arm/mach-cns3xxx/laguna.c -@@ -849,7 +849,6 @@ static struct map_desc laguna_io_desc[] +@@ -864,7 +864,6 @@ static struct map_desc laguna_io_desc[] static void __init laguna_map_io(void) { cns3xxx_map_io(); @@ -8,7 +8,7 @@ iotable_init(ARRAY_AND_SIZE(laguna_io_desc)); laguna_early_serial_setup(); } -@@ -873,15 +872,6 @@ static int laguna_register_gpio(struct g +@@ -888,15 +887,6 @@ static int laguna_register_gpio(struct g return ret; } @@ -24,7 +24,7 @@ static int __init laguna_model_setup(void) { u32 __iomem *mem; -@@ -1077,5 +1067,6 @@ MACHINE_START(GW2388, "Gateworks Corpora +@@ -1099,5 +1089,6 @@ MACHINE_START(GW2388, "Gateworks Corpora .init_irq = cns3xxx_init_irq, .init_time = cns3xxx_timer_init, .init_machine = laguna_init, diff --git a/target/linux/cns3xxx/patches-4.4/110-pci_isolated_interrupts.patch b/target/linux/cns3xxx/patches-4.4/110-pci_isolated_interrupts.patch index f25b171938..bb01d46a3b 100644 --- a/target/linux/cns3xxx/patches-4.4/110-pci_isolated_interrupts.patch +++ b/target/linux/cns3xxx/patches-4.4/110-pci_isolated_interrupts.patch @@ -8,7 +8,7 @@ #include #include #include -@@ -872,6 +873,47 @@ static int laguna_register_gpio(struct g +@@ -887,6 +888,47 @@ static int laguna_register_gpio(struct g return ret; } @@ -56,7 +56,7 @@ static int __init laguna_model_setup(void) { u32 __iomem *mem; -@@ -883,8 +925,33 @@ static int __init laguna_model_setup(voi +@@ -898,8 +940,33 @@ static int __init laguna_model_setup(voi printk("Running on Gateworks Laguna %s\n", laguna_info.model); cns3xxx_gpio_init( 0, 32, CNS3XXX_GPIOA_BASE_VIRT, IRQ_CNS3XXX_GPIOA, NR_IRQS_CNS3XXX); diff --git a/target/linux/generic/patches-4.4/810-pci_disable_common_quirks.patch b/target/linux/generic/patches-4.4/810-pci_disable_common_quirks.patch index 587fe90de4..e5c9043065 100644 --- a/target/linux/generic/patches-4.4/810-pci_disable_common_quirks.patch +++ b/target/linux/generic/patches-4.4/810-pci_disable_common_quirks.patch @@ -23,7 +23,7 @@ /* The Mellanox Tavor device gives false positive parity errors * Mark this device with a broken_parity_status, to allow * PCI scanning code to "skip" this now blacklisted device. -@@ -2963,6 +2964,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I +@@ -2975,6 +2976,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_I DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65f9, quirk_intel_mc_errata); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x65fa, quirk_intel_mc_errata); @@ -31,7 +31,7 @@ /* * Ivytown NTB BAR sizes are misreported by the hardware due to an erratum. To -@@ -3019,6 +3021,8 @@ static void fixup_debug_report(struct pc +@@ -3031,6 +3033,8 @@ static void fixup_debug_report(struct pc } } @@ -40,7 +40,7 @@ /* * Some BIOS implementations leave the Intel GPU interrupts enabled, * even though no one is handling them (f.e. i915 driver is never loaded). -@@ -3053,6 +3057,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN +@@ -3065,6 +3069,8 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IN DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x010a, disable_igfx_irq); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0152, disable_igfx_irq); diff --git a/target/linux/generic/patches-4.4/863-gpiommc.patch b/target/linux/generic/patches-4.4/863-gpiommc.patch index 55982b65b5..ea3599ea0d 100644 --- a/target/linux/generic/patches-4.4/863-gpiommc.patch +++ b/target/linux/generic/patches-4.4/863-gpiommc.patch @@ -612,7 +612,7 @@ +module_exit(gpiommc_modexit); --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig -@@ -566,6 +566,31 @@ config MMC_SDHI +@@ -567,6 +567,31 @@ config MMC_SDHI This provides support for the SDHI SD/SDIO controller found in SuperH and ARM SH-Mobile SoCs diff --git a/target/linux/generic/patches-4.4/904-debloat_dma_buf.patch b/target/linux/generic/patches-4.4/904-debloat_dma_buf.patch index 3766ceacb7..3e6a9a1d68 100644 --- a/target/linux/generic/patches-4.4/904-debloat_dma_buf.patch +++ b/target/linux/generic/patches-4.4/904-debloat_dma_buf.patch @@ -34,7 +34,7 @@ +MODULE_LICENSE("GPL"); --- a/kernel/sched/core.c +++ b/kernel/sched/core.c -@@ -2072,6 +2072,7 @@ int wake_up_state(struct task_struct *p, +@@ -2075,6 +2075,7 @@ int wake_up_state(struct task_struct *p, { return try_to_wake_up(p, state, 0); } diff --git a/target/linux/ixp4xx/patches-4.4/020-gateworks_i2c_pld.patch b/target/linux/ixp4xx/patches-4.4/020-gateworks_i2c_pld.patch index b096387961..c527db8ed1 100644 --- a/target/linux/ixp4xx/patches-4.4/020-gateworks_i2c_pld.patch +++ b/target/linux/ixp4xx/patches-4.4/020-gateworks_i2c_pld.patch @@ -1,6 +1,6 @@ --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig -@@ -696,6 +696,14 @@ config GPIO_SX150X +@@ -697,6 +697,14 @@ config GPIO_SX150X 8 bits: sx1508q 16 bits: sx1509q diff --git a/target/linux/lantiq/patches-4.4/0032-USB-fix-roothub-for-IFXHCD.patch b/target/linux/lantiq/patches-4.4/0032-USB-fix-roothub-for-IFXHCD.patch index 5a7cdb0a9a..a8bc2c1d1e 100644 --- a/target/linux/lantiq/patches-4.4/0032-USB-fix-roothub-for-IFXHCD.patch +++ b/target/linux/lantiq/patches-4.4/0032-USB-fix-roothub-for-IFXHCD.patch @@ -20,7 +20,7 @@ Subject: [PATCH 32/36] USB: fix roothub for IFXHCD choice --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c -@@ -4358,7 +4358,7 @@ hub_port_init(struct usb_hub *hub, struc +@@ -4356,7 +4356,7 @@ hub_port_init(struct usb_hub *hub, struc udev->ttport = hdev->ttport; } else if (udev->speed != USB_SPEED_HIGH && hdev->speed == USB_SPEED_HIGH) { diff --git a/target/linux/mediatek/patches-4.4/0019-xhci-mediatek-support-MTK-xHCI-host-controller.patch b/target/linux/mediatek/patches-4.4/0019-xhci-mediatek-support-MTK-xHCI-host-controller.patch index 1c4816f121..c107c7ce87 100644 --- a/target/linux/mediatek/patches-4.4/0019-xhci-mediatek-support-MTK-xHCI-host-controller.patch +++ b/target/linux/mediatek/patches-4.4/0019-xhci-mediatek-support-MTK-xHCI-host-controller.patch @@ -1428,7 +1428,7 @@ Reviewed-by: Daniel Thompson /* * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA -@@ -3083,17 +3084,22 @@ static u32 xhci_td_remainder(struct xhci +@@ -3084,17 +3085,22 @@ static u32 xhci_td_remainder(struct xhci { u32 maxp, total_packet_count; @@ -1455,7 +1455,7 @@ Reviewed-by: Daniel Thompson /* Queueing functions don't count the current TRB into transferred */ return (total_packet_count - ((transferred + trb_buff_len) / maxp)); } -@@ -3481,7 +3487,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd * +@@ -3482,7 +3488,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd * field |= 0x1; /* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */ diff --git a/target/linux/mvebu/patches-4.4/202-gpio_mvebu_add_limited_pwm_support.patch b/target/linux/mvebu/patches-4.4/202-gpio_mvebu_add_limited_pwm_support.patch index e9c4e026bb..b09c89f31a 100644 --- a/target/linux/mvebu/patches-4.4/202-gpio_mvebu_add_limited_pwm_support.patch +++ b/target/linux/mvebu/patches-4.4/202-gpio_mvebu_add_limited_pwm_support.patch @@ -23,7 +23,7 @@ Signed-off-by: Andrew Lunn --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig -@@ -294,6 +294,11 @@ config GPIO_MVEBU +@@ -295,6 +295,11 @@ config GPIO_MVEBU depends on OF select GENERIC_IRQ_CHIP diff --git a/target/linux/octeon/patches-4.4/150-mmc-octeon-add-host-driver-for-octeon-mmc-controller.patch b/target/linux/octeon/patches-4.4/150-mmc-octeon-add-host-driver-for-octeon-mmc-controller.patch index 62e5ef858a..ba6af4ed9a 100644 --- a/target/linux/octeon/patches-4.4/150-mmc-octeon-add-host-driver-for-octeon-mmc-controller.patch +++ b/target/linux/octeon/patches-4.4/150-mmc-octeon-add-host-driver-for-octeon-mmc-controller.patch @@ -72,7 +72,7 @@ + }; --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig -@@ -436,6 +436,16 @@ config MMC_MXS +@@ -437,6 +437,16 @@ config MMC_MXS If unsure, say N. diff --git a/target/linux/ramips/patches-4.4/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch b/target/linux/ramips/patches-4.4/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch index 1a7ddec364..a49793f8cd 100644 --- a/target/linux/ramips/patches-4.4/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch +++ b/target/linux/ramips/patches-4.4/0027-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch @@ -47,7 +47,7 @@ Cc: linux-gpio@vger.kernel.org +#endif /* __ASM_MACH_RALINK_GPIO_H */ --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig -@@ -351,6 +351,12 @@ config GPIO_SAMSUNG +@@ -352,6 +352,12 @@ config GPIO_SAMSUNG Legacy GPIO support. Use only for platforms without support for pinctrl. diff --git a/target/linux/ramips/patches-4.4/0028-GPIO-ralink-add-mt7621-gpio-controller.patch b/target/linux/ramips/patches-4.4/0028-GPIO-ralink-add-mt7621-gpio-controller.patch index e407805a94..46a1d9ec79 100644 --- a/target/linux/ramips/patches-4.4/0028-GPIO-ralink-add-mt7621-gpio-controller.patch +++ b/target/linux/ramips/patches-4.4/0028-GPIO-ralink-add-mt7621-gpio-controller.patch @@ -26,7 +26,7 @@ Signed-off-by: John Crispin bool "SGI IP22 (Indy/Indigo2)" --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig -@@ -260,6 +260,12 @@ config GPIO_MB86S7X +@@ -261,6 +261,12 @@ config GPIO_MB86S7X help Say yes here to support the GPIO controller in Fujitsu MB86S70 SoCs. diff --git a/target/linux/ramips/patches-4.4/0033-xhci-mediatek-support-MTK-xHCI-host-controller.patch b/target/linux/ramips/patches-4.4/0033-xhci-mediatek-support-MTK-xHCI-host-controller.patch index 1cac9a22bc..5e5cfe2065 100644 --- a/target/linux/ramips/patches-4.4/0033-xhci-mediatek-support-MTK-xHCI-host-controller.patch +++ b/target/linux/ramips/patches-4.4/0033-xhci-mediatek-support-MTK-xHCI-host-controller.patch @@ -1420,7 +1420,7 @@ Signed-off-by: Greg Kroah-Hartman /* * Returns zero if the TRB isn't in this segment, otherwise it returns the DMA -@@ -3083,17 +3084,22 @@ static u32 xhci_td_remainder(struct xhci +@@ -3084,17 +3085,22 @@ static u32 xhci_td_remainder(struct xhci { u32 maxp, total_packet_count; @@ -1447,7 +1447,7 @@ Signed-off-by: Greg Kroah-Hartman /* Queueing functions don't count the current TRB into transferred */ return (total_packet_count - ((transferred + trb_buff_len) / maxp)); } -@@ -3481,7 +3487,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd * +@@ -3482,7 +3488,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd * field |= 0x1; /* xHCI 1.0/1.1 6.4.1.2.1: Transfer Type field */ diff --git a/target/linux/ramips/patches-4.4/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch b/target/linux/ramips/patches-4.4/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch index 7ac0aba43c..b36c77c78b 100644 --- a/target/linux/ramips/patches-4.4/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch +++ b/target/linux/ramips/patches-4.4/0046-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch @@ -25,7 +25,7 @@ Signed-off-by: John Crispin --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig -@@ -810,3 +810,5 @@ config MMC_MTK +@@ -811,3 +811,5 @@ config MMC_MTK If you have a machine with a integrated SD/MMC card reader, say Y or M here. This is needed if support for any SD/SDIO/MMC devices is required. If unsure, say N. -- 2.30.2