From d0cb6e995b6d6fc3aef52e46749449c46f3e8aa7 Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Wed, 8 Apr 2020 14:43:04 +0200 Subject: [PATCH] ath79: further fixes for ZyXEL NBG6716 This applies further fixes to the DTS of ZyXEL NBG6716 based on what is found in ar71xx (mach-nbg6716.c): - use WiFi label names as in ar71xx - fix WPS gpio number - fix GPIO_ACTIVE_HIGH and mode for WiFi switch - add codes for USB eject buttons - fix node name for "internet" LED This device has separate LEDs for WAN and "Internet". As the WAN-LED (and the four LAN-LEDs) are driven independent of the setup in DT/01_leds, the "internet" LED is left unassigned (in contrast to ar71xx, where it was set up effectively as a second WAN LED) Signed-off-by: Adrian Schmutzler --- .../linux/ath79/dts/qca9558_zyxel_nbg6716.dts | 17 ++++++++++------- 1 file changed, 10 insertions(+), 7 deletions(-) diff --git a/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts index 7fff1a78d9..2f00d0ba4d 100644 --- a/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts +++ b/target/linux/ath79/dts/qca9558_zyxel_nbg6716.dts @@ -29,7 +29,7 @@ gpios = <&gpio 15 GPIO_ACTIVE_LOW>; }; - wan { + internet { label = "nbg6716:white:internet"; gpios = <&gpio 18 GPIO_ACTIVE_LOW>; }; @@ -48,21 +48,21 @@ trigger-sources = <&hub_port0>; }; - wifi2 { - label = "nbg6716:white:wifi2"; + wifi2g { + label = "nbg6716:white:wifi2g"; gpios = <&gpio 19 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy1tpt"; }; - wifi5 { - label = "nbg6716:white:wifi5"; + wifi5g { + label = "nbg6716:white:wifi5g"; gpios = <&gpio 17 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; wps { label = "nbg6716:white:wps"; - gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio 21 GPIO_ACTIVE_LOW>; }; }; @@ -79,18 +79,21 @@ wifi { label = "WiFi button"; linux,code = ; - gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + linux,input-type = ; + gpios = <&gpio 1 GPIO_ACTIVE_HIGH>; debounce-interval = <60>; }; usb1 { label = "USB1 eject button"; + linux,code = ; gpios = <&gpio 0 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; usb2 { label = "USB2 eject button"; + linux,code = ; gpios = <&gpio 14 GPIO_ACTIVE_LOW>; debounce-interval = <60>; }; -- 2.30.2