From d02d11f8ae233316cb99ecb5a732f115c521f51b Mon Sep 17 00:00:00 2001 From: Philipp Tomsich Date: Tue, 28 Mar 2017 11:03:00 +0200 Subject: [PATCH] rockchip: rk3399: spl: make SPL boot-order configurable via /chosen The RK3399 does not have any boot selection pins and the BootROM probes the boot interfaces using the following boot-order: 1. SPI 2. eMMC (sdhci in DTS) 3. SD card (sdmmc in DTS) 4. USB loader For ease of deployment, the SPL stage should mirror the boot order of the ROM and use the same probing order (assuming that valid images can be detected by SPL) unless instructed otherwise. The boot-order can then be configured via the 'u-boot,spl-boot-order' property in the chosen-node of the DTS. While this approach is easily extensible to other boards, it is only implemented for the RK3399 for now, as the large SRAM on the RK3399 makes this easy to fit the needed infrastructure into SPL and our production setup already runs with DM, OF_CONTROL and BLK in SPL. The new boot-order property is expected to be used in conjunction with FIT images (and all legacy image formats disabled via Kconfig). A boot-sequence with probing and fallthroughs from SPI via eMMC to SD card (i.e. &spiflash, &sdhci, &sdmmc) has been validated on the RK3399-Q7. Signed-off-by: Philipp Tomsich Tested-by: Klaus Goger Tested-by: Philipp Tomsich Acked-by: Simon Glass --- arch/arm/mach-rockchip/rk3399-board-spl.c | 99 +++++++++++++++++++++++ doc/device-tree-bindings/chosen.txt | 22 +++++ 2 files changed, 121 insertions(+) diff --git a/arch/arm/mach-rockchip/rk3399-board-spl.c b/arch/arm/mach-rockchip/rk3399-board-spl.c index 08aa0cb1ca..4f84ec10a5 100644 --- a/arch/arm/mach-rockchip/rk3399-board-spl.c +++ b/arch/arm/mach-rockchip/rk3399-board-spl.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -27,6 +28,104 @@ DECLARE_GLOBAL_DATA_PTR; +#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_OF_CONTROL) +static int spl_node_to_boot_device(int node) +{ + struct udevice *parent; + + /* + * This should eventually move into the SPL code, once SPL becomes + * aware of the block-device layer. Until then (and to avoid unneeded + * delays in getting this feature out, it lives at the board-level). + */ + if (!uclass_get_device_by_of_offset(UCLASS_MMC, node, &parent)) { + struct udevice *dev; + struct blk_desc *desc = NULL; + + for (device_find_first_child(parent, &dev); + dev; + device_find_next_child(&dev)) { + if (device_get_uclass_id(dev) == UCLASS_BLK) { + desc = dev_get_uclass_platdata(dev); + break; + } + } + + if (!desc) + return -ENOENT; + + switch (desc->devnum) { + case 0: + return BOOT_DEVICE_MMC1; + case 1: + return BOOT_DEVICE_MMC2; + default: + return -ENOSYS; + } + } + + /* + * SPL doesn't differentiate SPI flashes, so we keep the detection + * brief and inaccurate... hopefully, the common SPL layer can be + * extended with awareness of the BLK layer (and matching OF_CONTROL) + * soon. + */ + if (!uclass_get_device_by_of_offset(UCLASS_SPI_FLASH, node, &parent)) + return BOOT_DEVICE_SPI; + + return -1; +} + +void board_boot_order(u32 *spl_boot_list) +{ + const void *blob = gd->fdt_blob; + int chosen_node = fdt_path_offset(blob, "/chosen"); + int idx = 0; + int elem; + int boot_device; + int node; + const char *conf; + + if (chosen_node < 0) { + debug("%s: /chosen not found, using spl_boot_device()\n", + __func__); + spl_boot_list[0] = spl_boot_device(); + return; + } + + for (elem = 0; + (conf = fdt_stringlist_get(blob, chosen_node, + "u-boot,spl-boot-order", elem, NULL)); + elem++) { + /* First check if the list element is an alias */ + const char *alias = fdt_get_alias(blob, conf); + if (alias) + conf = alias; + + /* Try to resolve the config item (or alias) as a path */ + node = fdt_path_offset(blob, conf); + if (node < 0) { + debug("%s: could not find %s in FDT", __func__, conf); + continue; + } + + /* Try to map this back onto SPL boot devices */ + boot_device = spl_node_to_boot_device(node); + if (boot_device < 0) { + debug("%s: could not map node @%x to a boot-device\n", + __func__, node); + continue; + } + + spl_boot_list[idx++] = boot_device; + } + + /* If we had no matches, fall back to spl_boot_device */ + if (idx == 0) + spl_boot_list[0] = spl_boot_device(); +} +#endif + u32 spl_boot_device(void) { return BOOT_DEVICE_MMC1; diff --git a/doc/device-tree-bindings/chosen.txt b/doc/device-tree-bindings/chosen.txt index bf9a30a8f9..5625d210e8 100644 --- a/doc/device-tree-bindings/chosen.txt +++ b/doc/device-tree-bindings/chosen.txt @@ -41,3 +41,25 @@ Example reg = <0xf00 0x10>; }; }; + +u-boot,spl-boot-order property +------------------------------ + +In a system using an SPL stage and having multiple boot sources +(e.g. SPI NOR flash, on-board eMMC and a removable SD-card), the boot +device may be probed by reading the image and verifying an image +signature. + +If the SPL is configured through the device-tree, the boot-order can +be configured with the spl-boot-order property under the /chosen node. +Each list element of the property should specify a device to be probed +in the order they are listed: references (i.e. implicit paths), a full +path or an alias is expected for each entry. + +Example +------- +/ { + chosen { + u-boot,spl-boot-order = &sdmmc, "/sdhci@fe330000"; + }; +}; -- 2.30.2