From cffb41f3eeaae77c0c747f671a2809a790d1413f Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Fri, 13 Feb 2015 13:30:16 +0100 Subject: [PATCH] ath10k: disable multi-vif ps by default Not all firmware revisions have a proper multi-interface client powersaving implementation, e.g. qca6174 WLAN.RM.2.0-00073. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo --- drivers/net/wireless/ath/ath10k/core.h | 7 ++++++ drivers/net/wireless/ath/ath10k/mac.c | 31 ++++++++++++++++++++++++-- 2 files changed, 36 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index 7cba7815be96..f65310c3ba5f 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -308,6 +308,7 @@ struct ath10k_vif { bool is_started; bool is_up; bool spectral_enabled; + bool ps; u32 aid; u8 bssid[ETH_ALEN]; @@ -433,6 +434,12 @@ enum ath10k_fw_features { */ ATH10K_FW_FEATURE_WMI_10_2 = 4, + /* Some firmware revisions lack proper multi-interface client powersave + * implementation. Enabling PS could result in connection drops, + * traffic stalls, etc. + */ + ATH10K_FW_FEATURE_MULTI_VIF_PS_SUPPORT = 5, + /* keep last */ ATH10K_FW_FEATURE_COUNT, }; diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 943e8909ea82..51838ed26eab 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -1251,6 +1251,20 @@ static int ath10k_mac_vif_recalc_ps_poll_count(struct ath10k_vif *arvif) return 0; } +static int ath10k_mac_ps_vif_count(struct ath10k *ar) +{ + struct ath10k_vif *arvif; + int num = 0; + + lockdep_assert_held(&ar->conf_mutex); + + list_for_each_entry(arvif, &ar->arvifs, list) + if (arvif->ps) + num++; + + return num; +} + static int ath10k_mac_vif_setup_ps(struct ath10k_vif *arvif) { struct ath10k *ar = arvif->ar; @@ -1260,13 +1274,24 @@ static int ath10k_mac_vif_setup_ps(struct ath10k_vif *arvif) enum wmi_sta_ps_mode psmode; int ret; int ps_timeout; + bool enable_ps; lockdep_assert_held(&arvif->ar->conf_mutex); if (arvif->vif->type != NL80211_IFTYPE_STATION) return 0; - if (vif->bss_conf.ps) { + enable_ps = arvif->ps; + + if (enable_ps && ath10k_mac_ps_vif_count(ar) > 1 && + !test_bit(ATH10K_FW_FEATURE_MULTI_VIF_PS_SUPPORT, + ar->fw_features)) { + ath10k_warn(ar, "refusing to enable ps on vdev %i: not supported by fw\n", + arvif->vdev_id); + enable_ps = false; + } + + if (enable_ps) { psmode = WMI_STA_PS_MODE_ENABLED; param = WMI_STA_PS_PARAM_INACTIVITY_TIME; @@ -3650,7 +3675,9 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw, } if (changed & BSS_CHANGED_PS) { - ret = ath10k_mac_vif_setup_ps(arvif); + arvif->ps = vif->bss_conf.ps; + + ret = ath10k_config_ps(ar); if (ret) ath10k_warn(ar, "failed to setup ps on vdev %i: %d\n", arvif->vdev_id, ret); -- 2.30.2