From cfddec3e1d3b45582909d6dd39f7dddb4ea0c459 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Thu, 19 Jul 2007 14:53:24 +0000 Subject: [PATCH] Convert the NAND driver to platform_driver, allow tgz image to be built correctly SVN-Revision: 8058 --- .../rb532-2.6/files/arch/mips/rb500/devices.c | 2 + .../files/drivers/mtd/nand/rbmipsnand.c | 181 +++++++++++++----- target/linux/rb532-2.6/image/Makefile | 7 + 3 files changed, 137 insertions(+), 53 deletions(-) diff --git a/target/linux/rb532-2.6/files/arch/mips/rb500/devices.c b/target/linux/rb532-2.6/files/arch/mips/rb500/devices.c index 61250f9da1..be40106d80 100644 --- a/target/linux/rb532-2.6/files/arch/mips/rb500/devices.c +++ b/target/linux/rb532-2.6/files/arch/mips/rb500/devices.c @@ -128,6 +128,8 @@ static struct platform_device cf_slot0 = { static struct resource nand_slot0_res[] = { { .name = "nand_membase", + .start = 0x18a20000, + .end = (0x18a20000+0x1000)-1, .flags = IORESOURCE_MEM } }; diff --git a/target/linux/rb532-2.6/files/drivers/mtd/nand/rbmipsnand.c b/target/linux/rb532-2.6/files/drivers/mtd/nand/rbmipsnand.c index 027241b206..47bdbc7c34 100644 --- a/target/linux/rb532-2.6/files/drivers/mtd/nand/rbmipsnand.c +++ b/target/linux/rb532-2.6/files/drivers/mtd/nand/rbmipsnand.c @@ -1,8 +1,11 @@ -#include +#include +#include +#include #include #include #include #include + #include #include #include @@ -29,7 +32,30 @@ #define LO_ULED (1 << 7) #define MEM32(x) *((volatile unsigned *) (x)) -static void __iomem *p_nand; + +struct rb500_nand_info { + struct nand_chip chip; + struct mtd_info mtd; + void __iomem *io_base; +#ifdef CONFIG_MTD_PARTITIONS + int nr_parts; + struct mtd_partition *parts; +#endif + int init_ok; + int flags1; + int flags2; +}; + +static struct mtd_partition partition_info[] = { + { + name:"RouterBoard NAND Boot", + offset:0, + size:4 * 1024 * 1024}, + { + name:"rootfs", + offset:MTDPART_OFS_NXTBLK, + size:MTDPART_SIZ_FULL} +}; extern void changeLatchU5(unsigned char orMask, unsigned char nandMask); @@ -66,72 +92,121 @@ static void rbmips_hwcontrol500(struct mtd_info *mtd, int cmd, } -static struct mtd_partition partition_info[] = { - { - name:"RouterBoard NAND Boot", - offset:0, - size:4 * 1024 * 1024}, - { - name:"RouterBoard NAND Main", - offset:MTDPART_OFS_NXTBLK, - size:MTDPART_SIZ_FULL} -}; - -static struct mtd_info rmtd; -static struct nand_chip rnand; - -static unsigned init_ok = 0; - -unsigned get_rbnand_block_size(void) +unsigned get_rbnand_block_size(struct rb500_nand_info *data) { - if (init_ok) - return rmtd.writesize; + if (data->init_ok) + return data->mtd.writesize; else return 0; } EXPORT_SYMBOL(get_rbnand_block_size); -int __init rbmips_init(void) +static int rbmips_probe(struct platform_device *pdev) { + struct rb500_nand_info *data; + int res = 0; int *b; - memset(&rmtd, 0, sizeof(rmtd)); - memset(&rnand, 0, sizeof(rnand)); - - printk("RB500 nand\n"); - changeLatchU5(LO_FOFF | LO_CEX, - LO_ULED | LO_ALE | LO_CLE | LO_WPX); - rnand.cmd_ctrl = rbmips_hwcontrol500; - - rnand.dev_ready = rb500_dev_ready; - rnand.IO_ADDR_W = (unsigned char *) - KSEG1ADDR(MEM32(IDT434_REG_BASE + DEV2BASE)); - rnand.IO_ADDR_R = rnand.IO_ADDR_W; - - p_nand = (void __iomem *) ioremap((void *) 0x18a20000, 0x1000); - if (!p_nand) { - printk("RBnand Unable ioremap buffer"); - return -ENXIO; + + /* Allocate memory for the structure */ + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) { + dev_err(&pdev->dev, "Failed to allocate device structure\n"); + return -ENOMEM; } - rnand.ecc.mode = NAND_ECC_SOFT; - rnand.chip_delay = 25; - rnand.options |= NAND_NO_AUTOINCR; - rmtd.priv = &rnand; + + data->io_base = ioremap(pdev->resource[0].start, pdev->resource[0].end - pdev->resource[0].start + 1); + + if (data->io_base == NULL) { + dev_err(&pdev->dev, "ioremap failed\n"); + kfree(data); + return -EIO; + } + + /* FIXME : this seems to work only for newer RB500, check the version to set the right flags accordingly */ + data->flags1 = LO_FOFF | LO_CEX; + data->flags2 = LO_ULED | LO_ALE | LO_CLE | LO_WPX; + + changeLatchU5(data->flags1, data->flags2); + + data->chip.cmd_ctrl = rbmips_hwcontrol500; + + data->chip.dev_ready = rb500_dev_ready; + data->chip.IO_ADDR_W = (unsigned char *)KSEG1ADDR(MEM32(IDT434_REG_BASE + DEV2BASE)); + data->chip.IO_ADDR_R = data->chip.IO_ADDR_W; + + data->chip.ecc.mode = NAND_ECC_SOFT; + data->chip.chip_delay = 25; + data->chip.options |= NAND_NO_AUTOINCR; + + data->chip.priv = &data; + data->mtd.priv = &data->chip; + data->mtd.owner = THIS_MODULE; b = (int *) KSEG1ADDR(0x18010020); printk("dev2base 0x%08x mask 0x%08x c 0x%08x tc 0x%08x\n", b[0], b[1], b[2], b[3]); - if (nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1) - && nand_scan(&rmtd, 1) && nand_scan(&rmtd, 1)) { - printk("RBxxx nand device not found\n"); - iounmap((void *) p_nand); - return -ENXIO; - } + platform_set_drvdata(pdev, data); + + /* Why do we need to scan 4 times ? */ + if (nand_scan(&data->mtd, 1) && nand_scan(&data->mtd, 1) && nand_scan(&data->mtd, 1) && nand_scan(&data->mtd, 1)) { + printk(KERN_INFO "RB500 nand device not found\n"); + res = -ENXIO; + goto out; + } + + printk(KERN_INFO "RB500 NAND\n"); + add_mtd_partitions(&data->mtd, partition_info, 2); + data->init_ok = 1; + + res = add_mtd_device(&data->mtd); + if (!res) + return res; + + nand_release(&data->mtd); +out: + platform_set_drvdata(pdev, NULL); + iounmap(data->io_base); + kfree(data); + return res; +} + +static int __devexit rbmips_remove(struct platform_device *pdev) +{ + struct rb500_nand_info *data = platform_get_drvdata(pdev); + + nand_release(&data->mtd); + iounmap(data->io_base); + kfree(data); - add_mtd_partitions(&rmtd, partition_info, 2); - init_ok = 1; - return 0; + return 0; } -module_init(rbmips_init); +static struct platform_driver rb500_nand_driver = { + .probe = rbmips_probe, + .remove = rbmips_remove, + .driver = { + .name = "rb500-nand", + .owner = THIS_MODULE, + }, +}; + +static int __init rb500_nand_init(void) +{ + int err; + err = platform_driver_register(&rb500_nand_driver); + return err; +} + +static void __exit rb500_nand_exit(void) +{ + platform_driver_unregister(&rb500_nand_driver); +} + +module_init(rb500_nand_init); +module_exit(rb500_nand_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Goodenough, Felix Fietkau, Florian Fainelli"); +MODULE_DESCRIPTION("RouterBOARD 500 NAND driver"); diff --git a/target/linux/rb532-2.6/image/Makefile b/target/linux/rb532-2.6/image/Makefile index 555eb2a645..a9e2b9575c 100644 --- a/target/linux/rb532-2.6/image/Makefile +++ b/target/linux/rb532-2.6/image/Makefile @@ -49,9 +49,16 @@ define Image/cmdline/squashfs block2mtd.block2mtd=/dev/cfa2,65536 root=/dev/mtdblock0 rootfstype=squashfs init=/etc/preinit endef +# TGZ images should be used with a yaffs2 rootfs +define Image/cmdline/tgz +root=/dev/mtdblock1 rootfstype=yaffs2 init=/etc/preinit +endef + define Image/Build $(STAGING_DIR)/bin/patch-cmdline $(KDIR)/vmlinux.elf '$(strip $(call Image/cmdline/$(1))) ' +ifneq ($(1),tgz) ./gen_image.sh $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).bin 4 $(KDIR)/vmlinux.elf $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1) +endif endef $(eval $(call BuildImage)) -- 2.30.2