From cde999e2a7b238ef46875a724d3630e168d94f4d Mon Sep 17 00:00:00 2001 From: Pascal PAILLET-LME Date: Tue, 19 Feb 2019 10:04:32 +0000 Subject: [PATCH] dt-bindings: regulator: remove interrupt-parent description on stpmic1 The interrupt parent description is not needed as the parent is a parent node with 'interrupt-controller' property. Signed-off-by: pascal paillet Signed-off-by: Mark Brown --- .../devicetree/bindings/regulator/st,stpmic1-regulator.txt | 3 --- 1 file changed, 3 deletions(-) diff --git a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt index a3f476240565..de27897d3f3a 100644 --- a/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/st,stpmic1-regulator.txt @@ -29,7 +29,6 @@ Optional properties: if set, all regulators are switched off in case of over-current detection on this regulator, if not set, the driver only sends an over-current event. -- interrupt-parent: phandle to the parent interrupt controller - interrupts: index of current limit detection interrupt - -supply: phandle to the parent supply/regulator node each regulator supply can be described except vref_ddr. @@ -43,7 +42,6 @@ regulators { vdd_core: buck1 { regulator-name = "vdd_core"; interrupts = ; - interrupt-parent = <&pmic>; st,mask-reset; regulator-pull-down; regulator-min-microvolt = <700000>; @@ -53,7 +51,6 @@ regulators { v3v3: buck4 { regulator-name = "v3v3"; interrupts = ; - interrupt-parent = <&mypmic>; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; -- 2.30.2