From cc95948972576c3efa43c9ed05b4a265805a4c54 Mon Sep 17 00:00:00 2001 From: Michael Schwingen Date: Sun, 22 Feb 2009 18:58:45 +0100 Subject: [PATCH] ALSA: hda - add support for "Maxdata Favorit 100XS" (Intel HDA/ALC260) Signed-off-by: Michael Schwingen Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 130 ++++++++++++++++++++++++++++++++++ 1 file changed, 130 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 169b3837af52..abddabc1efa8 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -78,6 +78,7 @@ enum { ALC260_ACER, ALC260_WILL, ALC260_REPLACER_672V, + ALC260_FAVORIT100, #ifdef CONFIG_SND_DEBUG ALC260_TEST, #endif @@ -4537,6 +4538,26 @@ static struct hda_input_mux alc260_acer_capture_sources[2] = { }, }, }; + +/* Maxdata Favorit 100XS */ +static struct hda_input_mux alc260_favorit100_capture_sources[2] = { + { + .num_items = 2, + .items = { + { "Line/Mic", 0x0 }, + { "CD", 0x4 }, + }, + }, + { + .num_items = 3, + .items = { + { "Line/Mic", 0x0 }, + { "CD", 0x4 }, + { "Mixer", 0x5 }, + }, + }, +}; + /* * This is just place-holder, so there's something for alc_build_pcms to look * at when it calculates the maximum number of channels. ALC260 has no mixer @@ -4817,6 +4838,18 @@ static struct snd_kcontrol_new alc260_acer_mixer[] = { { } /* end */ }; +/* Maxdata Favorit 100XS: one output and one input (0x12) jack + */ +static struct snd_kcontrol_new alc260_favorit100_mixer[] = { + HDA_CODEC_VOLUME("Master Playback Volume", 0x08, 0x0, HDA_OUTPUT), + HDA_BIND_MUTE("Master Playback Switch", 0x08, 2, HDA_INPUT), + ALC_PIN_MODE("Output Jack Mode", 0x0f, ALC_PIN_DIR_INOUT), + HDA_CODEC_VOLUME("Line/Mic Playback Volume", 0x07, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("Line/Mic Playback Switch", 0x07, 0x0, HDA_INPUT), + ALC_PIN_MODE("Line/Mic Jack Mode", 0x12, ALC_PIN_DIR_IN), + { } /* end */ +}; + /* Packard bell V7900 ALC260 pin usage: HP = 0x0f, Mic jack = 0x12, * Line In jack = 0x14, CD audio = 0x16, pc beep = 0x17. */ @@ -5188,6 +5221,89 @@ static struct hda_verb alc260_acer_init_verbs[] = { { } }; +/* Initialisation sequence for Maxdata Favorit 100XS + * (adapted from Acer init verbs). + */ +static struct hda_verb alc260_favorit100_init_verbs[] = { + /* GPIO 0 enables the output jack. + * Turn this on and rely on the standard mute + * methods whenever the user wants to turn these outputs off. + */ + {0x01, AC_VERB_SET_GPIO_MASK, 0x01}, + {0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01}, + {0x01, AC_VERB_SET_GPIO_DATA, 0x01}, + /* Line/Mic input jack is connected to Mic1 pin */ + {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50}, + /* Ensure all other unused pins are disabled and muted. */ + {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x10, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x11, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x13, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x13, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, 0}, + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + /* Disable digital (SPDIF) pins */ + {0x03, AC_VERB_SET_DIGI_CONVERT_1, 0}, + {0x06, AC_VERB_SET_DIGI_CONVERT_1, 0}, + + /* Ensure Mic1 and Line1 pin widgets take input from the OUT1 sum + * bus when acting as outputs. + */ + {0x0b, AC_VERB_SET_CONNECT_SEL, 0}, + {0x0d, AC_VERB_SET_CONNECT_SEL, 0}, + + /* Start with output sum widgets muted and their output gains at min */ + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x09, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x0a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_ZERO}, + + /* Unmute Line-out pin widget amp left and right + * (no equiv mixer ctrl) + */ + {0x0f, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE}, + /* Unmute Mic1 and Line1 pin widget input buffers since they start as + * inputs. If the pin mode is changed by the user the pin mode control + * will take care of enabling the pin's input/output buffers as needed. + * Therefore there's no need to enable the input buffer at this + * stage. + */ + {0x12, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)}, + + /* Mute capture amp left and right */ + {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + /* Set ADC connection select to match default mixer setting - mic + * (on mic1 pin) + */ + {0x04, AC_VERB_SET_CONNECT_SEL, 0x00}, + + /* Do similar with the second ADC: mute capture input amp and + * set ADC connection to mic to match ALSA's default state. + */ + {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x05, AC_VERB_SET_CONNECT_SEL, 0x00}, + + /* Mute all inputs to mixer widget (even unconnected ones) */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, /* mic1 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, /* mic2 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, /* line1 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, /* line2 pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* CD pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(5)}, /* Beep-gen pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(6)}, /* Line-out pin */ + {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(7)}, /* HP-pin pin */ + + { } +}; + static struct hda_verb alc260_will_verbs[] = { {0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {0x0b, AC_VERB_SET_CONNECT_SEL, 0x00}, @@ -5730,6 +5846,7 @@ static const char *alc260_models[ALC260_MODEL_LAST] = { [ALC260_ACER] = "acer", [ALC260_WILL] = "will", [ALC260_REPLACER_672V] = "replacer", + [ALC260_FAVORIT100] = "favorit100", #ifdef CONFIG_SND_DEBUG [ALC260_TEST] = "test", #endif @@ -5739,6 +5856,7 @@ static const char *alc260_models[ALC260_MODEL_LAST] = { static struct snd_pci_quirk alc260_cfg_tbl[] = { SND_PCI_QUIRK(0x1025, 0x007b, "Acer C20x", ALC260_ACER), SND_PCI_QUIRK(0x1025, 0x008f, "Acer", ALC260_ACER), + SND_PCI_QUIRK(0x1509, 0x4540, "Favorit 100XS", ALC260_FAVORIT100), SND_PCI_QUIRK(0x103c, 0x2808, "HP d5700", ALC260_HP_3013), SND_PCI_QUIRK(0x103c, 0x280a, "HP d5750", ALC260_HP_3013), SND_PCI_QUIRK(0x103c, 0x3010, "HP", ALC260_HP_3013), @@ -5840,6 +5958,18 @@ static struct alc_config_preset alc260_presets[] = { .num_mux_defs = ARRAY_SIZE(alc260_acer_capture_sources), .input_mux = alc260_acer_capture_sources, }, + [ALC260_FAVORIT100] = { + .mixers = { alc260_favorit100_mixer }, + .init_verbs = { alc260_favorit100_init_verbs }, + .num_dacs = ARRAY_SIZE(alc260_dac_nids), + .dac_nids = alc260_dac_nids, + .num_adc_nids = ARRAY_SIZE(alc260_dual_adc_nids), + .adc_nids = alc260_dual_adc_nids, + .num_channel_mode = ARRAY_SIZE(alc260_modes), + .channel_mode = alc260_modes, + .num_mux_defs = ARRAY_SIZE(alc260_favorit100_capture_sources), + .input_mux = alc260_favorit100_capture_sources, + }, [ALC260_WILL] = { .mixers = { alc260_will_mixer }, .init_verbs = { alc260_init_verbs, alc260_will_verbs }, -- 2.30.2