From cc4ee2eeb465c1f4404b91852e6c86a43923c55e Mon Sep 17 00:00:00 2001 From: Adrian Schmutzler Date: Sat, 6 Mar 2021 11:23:38 +0100 Subject: [PATCH] Revert "ramips: add support for kernel 5.10" This reverts commit b4aad29a1d7ad77d67073c1c54b28c429c64ed9b. This was accidentally folded into a single commit. Remove it and apply it properly again. Signed-off-by: Adrian Schmutzler --- target/linux/ramips/Makefile | 2 +- .../files/drivers/net/ethernet/ralink/mdio.c | 9 - .../drivers/net/ethernet/ralink/mdio_rt2880.c | 8 - .../drivers/net/ethernet/ralink/mtk_eth_soc.c | 4 - .../drivers/net/ethernet/ralink/soc_mt7620.c | 11 +- target/linux/ramips/mt7620/config-5.10 | 193 --- target/linux/ramips/mt7621/config-5.10 | 288 ---- target/linux/ramips/mt76x8/config-5.10 | 191 --- ...0-mips-ralink-manage-low-reset-lines.patch | 45 - .../patches-5.10/200-add-ralink-eth.patch | 20 - .../patches-5.10/202-weak_reordering.patch | 10 - ...1-pci-phy-kconfig-select-regmap-mmio.patch | 10 - ...0-mt7620-export-chip-version-and-pkg.patch | 19 - ...reservation-in-bootmem_init-for-cert.patch | 45 - ...e-to-enable-disable-the-cevt-r4k-irq.patch | 100 -- ...IPS-ralink-add-cpu-frequency-scaling.patch | 195 --- ...-the-commandline-from-the-devicetree.patch | 21 - ...-MIPS-add-bootargs-override-property.patch | 63 - ...315-owrt-hack-fix-mt7688-cache-issue.patch | 29 - ...-select-illegal-access-driver-by-def.patch | 25 - .../320-mt7621-core-detect-hack.patch | 61 - .../patches-5.10/321-mt7621-timer.patch | 87 - .../322-mt7621-fix-cpu-clk-add-clkdev.patch | 187 --- .../323-mt7621-memory-detect.patch | 129 -- .../patches-5.10/324-mt7621-perfctr-fix.patch | 15 - .../330-fix-pci-init-mt7620.patch | 21 - ...mtd-cfi-cmdset-0002-force-word-write.patch | 20 - ...driver-support-for-MT7621-nand-flash.patch | 1403 ----------------- ...documentation-for-mt7621-nand-driver.patch | 85 - .../420-spi-nor-add-gd25q512.patch | 12 - ...ethernet-mediatek-support-net-labels.patch | 34 - .../ramips/patches-5.10/710-at803x.patch | 149 -- ...y-simplify-phy_link_change-arguments.patch | 118 -- .../721-NET-no-auto-carrier-off-support.patch | 47 - .../800-GPIO-add-named-gpio-exports.patch | 165 -- ...DT-Add-documentation-for-gpio-ralink.patch | 59 - ...alink-add-gpio-driver-for-ralink-SoC.patch | 416 ----- ...support-for-GPIO-as-interrupt-contro.patch | 44 - .../810-uvc-add-iPassion-iP2970-support.patch | 246 --- ...-DT-Add-documentation-for-spi-rt2880.patch | 44 - ...SPI-ralink-add-Ralink-SoC-spi-driver.patch | 574 ------- .../825-i2c-MIPS-adds-ralink-I2C-driver.patch | 507 ------ ...IPS-ralink-add-sdhci-for-mt7620a-SoC.patch | 43 - .../835-asoc-add-mt7620-support.patch | 1046 ------------ ...erial-add-ugly-custom-baud-rate-hack.patch | 22 - .../845-pwm-add-mediatek-support.patch | 217 --- .../850-awake-rt305x-dwc2-controller.patch | 15 - .../patches-5.10/855-linkit_bootstrap.patch | 97 -- target/linux/ramips/rt288x/config-5.10 | 177 --- target/linux/ramips/rt305x/config-5.10 | 176 --- target/linux/ramips/rt3883/config-5.10 | 177 --- 51 files changed, 2 insertions(+), 7679 deletions(-) delete mode 100644 target/linux/ramips/mt7620/config-5.10 delete mode 100644 target/linux/ramips/mt7621/config-5.10 delete mode 100644 target/linux/ramips/mt76x8/config-5.10 delete mode 100644 target/linux/ramips/patches-5.10/020-mips-ralink-manage-low-reset-lines.patch delete mode 100644 target/linux/ramips/patches-5.10/200-add-ralink-eth.patch delete mode 100644 target/linux/ramips/patches-5.10/202-weak_reordering.patch delete mode 100644 target/linux/ramips/patches-5.10/203-staging-mt7621-pci-phy-kconfig-select-regmap-mmio.patch delete mode 100644 target/linux/ramips/patches-5.10/300-mt7620-export-chip-version-and-pkg.patch delete mode 100644 target/linux/ramips/patches-5.10/310-MIPS-Fix-memory-reservation-in-bootmem_init-for-cert.patch delete mode 100644 target/linux/ramips/patches-5.10/311-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch delete mode 100644 target/linux/ramips/patches-5.10/312-MIPS-ralink-add-cpu-frequency-scaling.patch delete mode 100644 target/linux/ramips/patches-5.10/313-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch delete mode 100644 target/linux/ramips/patches-5.10/314-MIPS-add-bootargs-override-property.patch delete mode 100644 target/linux/ramips/patches-5.10/315-owrt-hack-fix-mt7688-cache-issue.patch delete mode 100644 target/linux/ramips/patches-5.10/316-arch-mips-do-not-select-illegal-access-driver-by-def.patch delete mode 100644 target/linux/ramips/patches-5.10/320-mt7621-core-detect-hack.patch delete mode 100644 target/linux/ramips/patches-5.10/321-mt7621-timer.patch delete mode 100644 target/linux/ramips/patches-5.10/322-mt7621-fix-cpu-clk-add-clkdev.patch delete mode 100644 target/linux/ramips/patches-5.10/323-mt7621-memory-detect.patch delete mode 100644 target/linux/ramips/patches-5.10/324-mt7621-perfctr-fix.patch delete mode 100644 target/linux/ramips/patches-5.10/330-fix-pci-init-mt7620.patch delete mode 100644 target/linux/ramips/patches-5.10/400-mtd-cfi-cmdset-0002-force-word-write.patch delete mode 100644 target/linux/ramips/patches-5.10/410-mtd-rawnand-add-driver-support-for-MT7621-nand-flash.patch delete mode 100644 target/linux/ramips/patches-5.10/411-dt-bindings-add-documentation-for-mt7621-nand-driver.patch delete mode 100644 target/linux/ramips/patches-5.10/420-spi-nor-add-gd25q512.patch delete mode 100644 target/linux/ramips/patches-5.10/700-net-ethernet-mediatek-support-net-labels.patch delete mode 100644 target/linux/ramips/patches-5.10/710-at803x.patch delete mode 100644 target/linux/ramips/patches-5.10/720-Revert-net-phy-simplify-phy_link_change-arguments.patch delete mode 100644 target/linux/ramips/patches-5.10/721-NET-no-auto-carrier-off-support.patch delete mode 100644 target/linux/ramips/patches-5.10/800-GPIO-add-named-gpio-exports.patch delete mode 100644 target/linux/ramips/patches-5.10/801-DT-Add-documentation-for-gpio-ralink.patch delete mode 100644 target/linux/ramips/patches-5.10/802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch delete mode 100644 target/linux/ramips/patches-5.10/803-gpio-ralink-Add-support-for-GPIO-as-interrupt-contro.patch delete mode 100644 target/linux/ramips/patches-5.10/810-uvc-add-iPassion-iP2970-support.patch delete mode 100644 target/linux/ramips/patches-5.10/820-DT-Add-documentation-for-spi-rt2880.patch delete mode 100644 target/linux/ramips/patches-5.10/821-SPI-ralink-add-Ralink-SoC-spi-driver.patch delete mode 100644 target/linux/ramips/patches-5.10/825-i2c-MIPS-adds-ralink-I2C-driver.patch delete mode 100644 target/linux/ramips/patches-5.10/830-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch delete mode 100644 target/linux/ramips/patches-5.10/835-asoc-add-mt7620-support.patch delete mode 100644 target/linux/ramips/patches-5.10/840-serial-add-ugly-custom-baud-rate-hack.patch delete mode 100644 target/linux/ramips/patches-5.10/845-pwm-add-mediatek-support.patch delete mode 100644 target/linux/ramips/patches-5.10/850-awake-rt305x-dwc2-controller.patch delete mode 100644 target/linux/ramips/patches-5.10/855-linkit_bootstrap.patch delete mode 100644 target/linux/ramips/rt288x/config-5.10 delete mode 100644 target/linux/ramips/rt305x/config-5.10 delete mode 100644 target/linux/ramips/rt3883/config-5.10 diff --git a/target/linux/ramips/Makefile b/target/linux/ramips/Makefile index d3f2d4b8fc7b..2cfb3c5cef94 100644 --- a/target/linux/ramips/Makefile +++ b/target/linux/ramips/Makefile @@ -11,7 +11,7 @@ SUBTARGETS:=mt7620 mt7621 mt76x8 rt288x rt305x rt3883 FEATURES:=squashfs gpio KERNEL_PATCHVER:=5.4 -KERNEL_TESTING_PATCHVER:=5.10 +KERNEL_TESTING_PATCHVER:=5.4 define Target/Description Build firmware images for Ralink RT288x/RT3xxx based boards. diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/mdio.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/mdio.c index dceb08b83527..33f973bed38b 100644 --- a/target/linux/ramips/files/drivers/net/ethernet/ralink/mdio.c +++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/mdio.c @@ -64,11 +64,7 @@ int fe_connect_phy_node(struct fe_priv *priv, struct device_node *phy_node, int { const __be32 *_phy_addr = NULL; struct phy_device *phydev; -#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 10, 0) int phy_mode; -#else - phy_interface_t phy_mode = PHY_INTERFACE_MODE_NA; -#endif _phy_addr = of_get_property(phy_node, "reg", NULL); @@ -77,13 +73,8 @@ int fe_connect_phy_node(struct fe_priv *priv, struct device_node *phy_node, int return -EINVAL; } -#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 10, 0) phy_mode = of_get_phy_mode(phy_node); if (phy_mode < 0) { -#else - of_get_phy_mode(phy_node, &phy_mode); - if (phy_mode == PHY_INTERFACE_MODE_NA) { -#endif dev_err(priv->dev, "incorrect phy-mode %d\n", phy_mode); priv->phy->phy_node[port] = NULL; return -EINVAL; diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/mdio_rt2880.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/mdio_rt2880.c index 6242cf9b4234..8d82c8f7adcc 100644 --- a/target/linux/ramips/files/drivers/net/ethernet/ralink/mdio_rt2880.c +++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/mdio_rt2880.c @@ -156,11 +156,7 @@ void rt2880_port_init(struct fe_priv *priv, struct device_node *np) const __be32 *id = of_get_property(np, "reg", NULL); const __be32 *link; int size; -#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 10, 0) int phy_mode; -#else - phy_interface_t phy_mode = PHY_INTERFACE_MODE_NA; -#endif if (!id || (be32_to_cpu(*id) != 0)) { pr_err("%s: invalid port id\n", np->name); @@ -176,11 +172,7 @@ void rt2880_port_init(struct fe_priv *priv, struct device_node *np) return; } -#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 10, 0) phy_mode = of_get_phy_mode(np); -#else - of_get_phy_mode(np, &phy_mode); -#endif switch (phy_mode) { case PHY_INTERFACE_MODE_RGMII: break; diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/mtk_eth_soc.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/mtk_eth_soc.c index b6e321b78c0c..f8301ad3ca7b 100644 --- a/target/linux/ramips/files/drivers/net/ethernet/ralink/mtk_eth_soc.c +++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/mtk_eth_soc.c @@ -1085,11 +1085,7 @@ poll_again: return rx_done; } -#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 10, 0) static void fe_tx_timeout(struct net_device *dev) -#else -static void fe_tx_timeout(struct net_device *dev, unsigned int txqueue) -#endif { struct fe_priv *priv = netdev_priv(dev); struct fe_tx_ring *ring = &priv->tx_ring; diff --git a/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_mt7620.c b/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_mt7620.c index 7317bc30aa7e..f442d558e1cb 100644 --- a/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_mt7620.c +++ b/target/linux/ramips/files/drivers/net/ethernet/ralink/soc_mt7620.c @@ -131,12 +131,7 @@ static void mt7620_port_init(struct fe_priv *priv, struct device_node *np) struct mt7620_gsw *gsw = (struct mt7620_gsw *)priv->soc->swpriv; const __be32 *_id = of_get_property(np, "reg", NULL); const __be32 *phy_addr; -#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 10, 0) - int phy_mode; -#else - phy_interface_t phy_mode = PHY_INTERFACE_MODE_NA; -#endif - int size, id; + int phy_mode, size, id; int shift = 12; u32 val, mask = 0; u32 val_delay = 0; @@ -166,11 +161,7 @@ static void mt7620_port_init(struct fe_priv *priv, struct device_node *np) return; } -#if LINUX_VERSION_CODE < KERNEL_VERSION(5, 10, 0) phy_mode = of_get_phy_mode(np); -#else - of_get_phy_mode(np, &phy_mode); -#endif switch (phy_mode) { case PHY_INTERFACE_MODE_RGMII: mask = 0; diff --git a/target/linux/ramips/mt7620/config-5.10 b/target/linux/ramips/mt7620/config-5.10 deleted file mode 100644 index 063ff1a43a05..000000000000 --- a/target/linux/ramips/mt7620/config-5.10 +++ /dev/null @@ -1,193 +0,0 @@ -CONFIG_AR8216_PHY=y -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MMAP_RND_BITS_MAX=15 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15 -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_BLK_MQ_PCI=y -CONFIG_CEVT_R4K=y -CONFIG_CEVT_SYSTICK_QUIRK=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKEVT_RT3352=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE="rootfstype=squashfs,jffs2" -CONFIG_CMDLINE_BOOL=y -# CONFIG_CMDLINE_OVERRIDE is not set -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CPU_GENERIC_DUMP_TLB=y -CONFIG_CPU_HAS_DIEI=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_RIXI=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS32_R1 is not set -CONFIG_CPU_MIPS32_R2=y -CONFIG_CPU_MIPSR2=y -CONFIG_CPU_MIPSR2_IRQ_VI=y -CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y -CONFIG_CPU_R4K_CACHE_TLB=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CPU_SUPPORTS_MSA=y -CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2 -CONFIG_CRYPTO_RNG2=y -CONFIG_CSRC_R4K=y -CONFIG_DEBUG_PINCTRL=y -CONFIG_DMA_NONCOHERENT=y -# CONFIG_DTB_MT7620A_EVAL is not set -# CONFIG_DTB_OMEGA2P is not set -CONFIG_DTB_RT_NONE=y -# CONFIG_DTB_VOCORE2 is not set -CONFIG_DTC=y -CONFIG_EARLY_PRINTK=y -CONFIG_FIXED_PHY=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IOMAP=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_LIB_ASHLDI3=y -CONFIG_GENERIC_LIB_ASHRDI3=y -CONFIG_GENERIC_LIB_CMPDI2=y -CONFIG_GENERIC_LIB_LSHRDI3=y -CONFIG_GENERIC_LIB_UCMPDI2=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GPIOLIB=y -# CONFIG_GPIO_MT7621 is not set -CONFIG_GPIO_RALINK=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HZ=250 -CONFIG_HZ_250=y -CONFIG_HZ_PERIODIC=y -CONFIG_ICPLUS_PHY=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_INTC=y -CONFIG_IRQ_MIPS_CPU=y -CONFIG_IRQ_WORK=y -# CONFIG_KERNEL_ZSTD is not set -CONFIG_LIBFDT=y -CONFIG_LLD_VERSION=0 -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_MARVELL_PHY=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MEMFD_CREATE=y -CONFIG_MFD_SYSCON=y -CONFIG_MIGRATION=y -CONFIG_MIPS=y -CONFIG_MIPS_ASID_BITS=8 -CONFIG_MIPS_ASID_SHIFT=0 -CONFIG_MIPS_CBPF_JIT=y -CONFIG_MIPS_CLOCK_VSYSCALL=y -# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set -# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set -# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set -CONFIG_MIPS_CMDLINE_FROM_DTB=y -# CONFIG_MIPS_ELF_APPENDED_DTB is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_MIPS_LD_CAN_LINK_VDSO=y -# CONFIG_MIPS_NO_APPENDED_DTB is not set -CONFIG_MIPS_RAW_APPENDED_DTB=y -CONFIG_MIPS_SPRAM=y -CONFIG_MODULES_USE_ELF_REL=y -# CONFIG_MT7621_WDT is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384 -CONFIG_MTD_SPLIT_JIMAGE_FW=y -CONFIG_MTD_SPLIT_SEAMA_FW=y -CONFIG_MTD_SPLIT_TPLINK_FW=y -CONFIG_MTD_SPLIT_UIMAGE_FW=y -CONFIG_MTD_VIRT_CONCAT=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NET_RALINK_GSW_MT7620=y -CONFIG_NET_RALINK_MDIO=y -CONFIG_NET_RALINK_MDIO_MT7620=y -CONFIG_NET_RALINK_MT7620=y -# CONFIG_NET_RALINK_RT3050 is not set -CONFIG_NET_RALINK_SOC=y -# CONFIG_NET_VENDOR_MEDIATEK is not set -CONFIG_NET_VENDOR_RALINK=y -CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DRIVERS_LEGACY=y -# CONFIG_PCI_MT7621 is not set -# CONFIG_PCI_MT7621_PHY is not set -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHY_RALINK_USB=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_RT2880=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_RALINK=y -CONFIG_RALINK_WDT=y -CONFIG_REGMAP=y -CONFIG_REGMAP_MMIO=y -CONFIG_RESET_CONTROLLER=y -CONFIG_SERIAL_8250_RT288X=y -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SOC_MT7620=y -# CONFIG_SOC_MT7621 is not set -# CONFIG_SOC_RT288X is not set -# CONFIG_SOC_RT305X is not set -# CONFIG_SOC_RT3883 is not set -CONFIG_SPI=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -# CONFIG_SPI_MT7621 is not set -CONFIG_SPI_RT2880=y -CONFIG_SRCU=y -CONFIG_SWCONFIG=y -CONFIG_SWCONFIG_LEDS=y -CONFIG_SWPHY=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_SYS_SUPPORTS_MIPS16=y -CONFIG_SYS_SUPPORTS_ZBOOT=y -CONFIG_TARGET_ISA_REV=2 -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TINY_SRCU=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -CONFIG_WATCHDOG_CORE=y diff --git a/target/linux/ramips/mt7621/config-5.10 b/target/linux/ramips/mt7621/config-5.10 deleted file mode 100644 index 430ea9513c5a..000000000000 --- a/target/linux/ramips/mt7621/config-5.10 +++ /dev/null @@ -1,288 +0,0 @@ -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MMAP_RND_BITS_MAX=15 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15 -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_AT803X_PHY=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BOARD_SCACHE=y -CONFIG_BOUNCE=y -CONFIG_CEVT_R4K=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKSRC_MIPS_GIC=y -CONFIG_CLOCKSOURCE_WATCHDOG=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE="rootfstype=squashfs,jffs2" -CONFIG_CMDLINE_BOOL=y -# CONFIG_CMDLINE_OVERRIDE is not set -CONFIG_COMMON_CLK=y -# CONFIG_COMMON_CLK_BOSTON is not set -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CPU_GENERIC_DUMP_TLB=y -CONFIG_CPU_HAS_DIEI=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_RIXI=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS32_R1 is not set -CONFIG_CPU_MIPS32_R2=y -CONFIG_CPU_MIPSR2=y -CONFIG_CPU_MIPSR2_IRQ_EI=y -CONFIG_CPU_MIPSR2_IRQ_VI=y -CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y -CONFIG_CPU_R4K_CACHE_TLB=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CPU_SUPPORTS_MSA=y -CONFIG_CRC16=y -CONFIG_CRYPTO_ACOMP2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_HASH_INFO=y -CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2 -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CSRC_R4K=y -CONFIG_DEBUG_PINCTRL=y -CONFIG_DIMLIB=y -CONFIG_DMA_NONCOHERENT=y -# CONFIG_DTB_GNUBEE1 is not set -# CONFIG_DTB_GNUBEE2 is not set -CONFIG_DTB_RT_NONE=y -CONFIG_DTC=y -CONFIG_EARLY_PRINTK=y -CONFIG_FIXED_PHY=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IOMAP=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_LIB_ASHLDI3=y -CONFIG_GENERIC_LIB_ASHRDI3=y -CONFIG_GENERIC_LIB_CMPDI2=y -CONFIG_GENERIC_LIB_LSHRDI3=y -CONFIG_GENERIC_LIB_UCMPDI2=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GLOB=y -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_GENERIC=y -CONFIG_GPIO_MT7621=y -# CONFIG_GPIO_RALINK is not set -CONFIG_GPIO_WATCHDOG=y -# CONFIG_GPIO_WATCHDOG_ARCH_INITCALL is not set -CONFIG_GRO_CELLS=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HIGHMEM=y -CONFIG_HZ=250 -CONFIG_HZ_250=y -CONFIG_HZ_PERIODIC=y -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_MT7621=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_MIPS_CPU=y -CONFIG_IRQ_WORK=y -# CONFIG_KERNEL_ZSTD is not set -CONFIG_LED_TRIGGER_PHY=y -CONFIG_LIBFDT=y -CONFIG_LLD_VERSION=0 -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MEMFD_CREATE=y -CONFIG_MFD_SYSCON=y -CONFIG_MIGRATION=y -CONFIG_MIKROTIK=y -CONFIG_MIKROTIK_RB_SYSFS=y -CONFIG_MIPS=y -CONFIG_MIPS_ASID_BITS=8 -CONFIG_MIPS_ASID_SHIFT=0 -CONFIG_MIPS_CBPF_JIT=y -CONFIG_MIPS_CLOCK_VSYSCALL=y -CONFIG_MIPS_CM=y -# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set -# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set -# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set -CONFIG_MIPS_CMDLINE_FROM_DTB=y -CONFIG_MIPS_CPC=y -CONFIG_MIPS_CPS=y -# CONFIG_MIPS_CPS_NS16550_BOOL is not set -CONFIG_MIPS_CPU_SCACHE=y -# CONFIG_MIPS_ELF_APPENDED_DTB is not set -CONFIG_MIPS_GIC=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_MIPS_LD_CAN_LINK_VDSO=y -CONFIG_MIPS_MT=y -CONFIG_MIPS_MT_FPAFF=y -CONFIG_MIPS_MT_SMP=y -# CONFIG_MIPS_NO_APPENDED_DTB is not set -CONFIG_MIPS_NR_CPU_NR_MAP=4 -CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y -CONFIG_MIPS_RAW_APPENDED_DTB=y -CONFIG_MIPS_SPRAM=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MT7621_WDT=y -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_NAND_CORE=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_ECC_SW_HAMMING=y -CONFIG_MTD_NAND_MT7621=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_ROUTERBOOT_PARTS=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_FIT_FW=y -CONFIG_MTD_SPLIT_MINOR_FW=y -CONFIG_MTD_SPLIT_SEAMA_FW=y -CONFIG_MTD_SPLIT_TPLINK_FW=y -CONFIG_MTD_SPLIT_TRX_FW=y -CONFIG_MTD_SPLIT_UIMAGE_FW=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MTD_VIRT_CONCAT=y -# CONFIG_MTK_HSDMA is not set -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NET_DEVLINK=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_MT7530=y -CONFIG_NET_DSA_TAG_MTK=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_MEDIATEK_SOC=y -CONFIG_NET_SWITCHDEV=y -CONFIG_NET_VENDOR_MEDIATEK=y -# CONFIG_NET_VENDOR_RALINK is not set -CONFIG_NR_CPUS=4 -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_PADATA=y -CONFIG_PCI=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_DRIVERS_GENERIC=y -CONFIG_PCI_MT7621=y -CONFIG_PCI_MT7621_PHY=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHYLINK=y -# CONFIG_PHY_RALINK_USB is not set -CONFIG_PINCTRL=y -CONFIG_PINCTRL_RT2880=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_PINCTRL_SX150X=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_GPIO=y -CONFIG_POWER_SUPPLY=y -CONFIG_QUEUED_RWLOCKS=y -CONFIG_QUEUED_SPINLOCKS=y -CONFIG_RALINK=y -# CONFIG_RALINK_WDT is not set -CONFIG_RATIONAL=y -CONFIG_RCU_NEED_SEGCBLIST=y -CONFIG_RCU_STALL_COMMON=y -CONFIG_REGMAP=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_BQ32K=y -CONFIG_RTC_DRV_PCF8563=y -CONFIG_RTC_I2C_AND_SPI=y -CONFIG_RTC_MC146818_LIB=y -CONFIG_SCHED_SMT=y -CONFIG_SERIAL_8250_NR_UARTS=3 -CONFIG_SERIAL_8250_RUNTIME_UARTS=3 -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SGL_ALLOC=y -CONFIG_SMP=y -CONFIG_SMP_UP=y -CONFIG_SOC_BUS=y -# CONFIG_SOC_MT7620 is not set -CONFIG_SOC_MT7621=y -# CONFIG_SOC_RT288X is not set -# CONFIG_SOC_RT305X is not set -# CONFIG_SOC_RT3883 is not set -CONFIG_SPI=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -CONFIG_SPI_MT7621=y -# CONFIG_SPI_RT2880 is not set -CONFIG_SRCU=y -CONFIG_SWPHY=y -CONFIG_SYNC_R4K=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_HIGHMEM=y -CONFIG_SYS_SUPPORTS_HOTPLUG_CPU=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_SYS_SUPPORTS_MIPS16=y -CONFIG_SYS_SUPPORTS_MIPS_CPS=y -CONFIG_SYS_SUPPORTS_MULTITHREADING=y -CONFIG_SYS_SUPPORTS_SCHED_SMT=y -CONFIG_SYS_SUPPORTS_SMP=y -CONFIG_SYS_SUPPORTS_ZBOOT=y -CONFIG_TARGET_ISA_REV=2 -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TREE_RCU=y -CONFIG_TREE_SRCU=y -CONFIG_UBIFS_FS=y -CONFIG_UBIFS_FS_ADVANCED_COMPR=y -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -CONFIG_WATCHDOG_CORE=y -CONFIG_WEAK_ORDERING=y -CONFIG_WEAK_REORDERING_BEYOND_LLSC=y -CONFIG_XPS=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y diff --git a/target/linux/ramips/mt76x8/config-5.10 b/target/linux/ramips/mt76x8/config-5.10 deleted file mode 100644 index 782917431992..000000000000 --- a/target/linux/ramips/mt76x8/config-5.10 +++ /dev/null @@ -1,191 +0,0 @@ -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MMAP_RND_BITS_MAX=15 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15 -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_AT803X_PHY=y -CONFIG_BLK_MQ_PCI=y -CONFIG_CEVT_R4K=y -CONFIG_CEVT_SYSTICK_QUIRK=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKEVT_RT3352=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE="rootfstype=squashfs,jffs2" -CONFIG_CMDLINE_BOOL=y -# CONFIG_CMDLINE_OVERRIDE is not set -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CPU_GENERIC_DUMP_TLB=y -CONFIG_CPU_HAS_DIEI=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_RIXI=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS32_R1 is not set -CONFIG_CPU_MIPS32_R2=y -CONFIG_CPU_MIPSR2=y -CONFIG_CPU_MIPSR2_IRQ_VI=y -CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y -CONFIG_CPU_R4K_CACHE_TLB=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CPU_SUPPORTS_MSA=y -CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2 -CONFIG_CRYPTO_RNG2=y -CONFIG_CSRC_R4K=y -CONFIG_DEBUG_PINCTRL=y -CONFIG_DMA_NONCOHERENT=y -# CONFIG_DTB_MT7620A_EVAL is not set -# CONFIG_DTB_OMEGA2P is not set -CONFIG_DTB_RT_NONE=y -# CONFIG_DTB_VOCORE2 is not set -CONFIG_DTC=y -CONFIG_EARLY_PRINTK=y -CONFIG_FIXED_PHY=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IOMAP=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_LIB_ASHLDI3=y -CONFIG_GENERIC_LIB_ASHRDI3=y -CONFIG_GENERIC_LIB_CMPDI2=y -CONFIG_GENERIC_LIB_LSHRDI3=y -CONFIG_GENERIC_LIB_UCMPDI2=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GPIOLIB=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_GENERIC=y -CONFIG_GPIO_MT7621=y -# CONFIG_GPIO_RALINK is not set -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HZ=250 -CONFIG_HZ_250=y -CONFIG_HZ_PERIODIC=y -CONFIG_ICPLUS_PHY=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_INTC=y -CONFIG_IRQ_MIPS_CPU=y -CONFIG_IRQ_WORK=y -# CONFIG_KERNEL_ZSTD is not set -CONFIG_LIBFDT=y -CONFIG_LLD_VERSION=0 -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MEMFD_CREATE=y -CONFIG_MFD_SYSCON=y -CONFIG_MIGRATION=y -CONFIG_MIPS=y -CONFIG_MIPS_ASID_BITS=8 -CONFIG_MIPS_ASID_SHIFT=0 -CONFIG_MIPS_CBPF_JIT=y -CONFIG_MIPS_CLOCK_VSYSCALL=y -# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set -# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set -# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set -CONFIG_MIPS_CMDLINE_FROM_DTB=y -# CONFIG_MIPS_ELF_APPENDED_DTB is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_MIPS_LD_CAN_LINK_VDSO=y -# CONFIG_MIPS_NO_APPENDED_DTB is not set -CONFIG_MIPS_RAW_APPENDED_DTB=y -CONFIG_MIPS_SPRAM=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_MT7621_WDT=y -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_TPLINK_FW=y -CONFIG_MTD_SPLIT_TRX_FW=y -CONFIG_MTD_SPLIT_UIMAGE_FW=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NET_RALINK_ESW_RT3050=y -# CONFIG_NET_RALINK_MT7620 is not set -CONFIG_NET_RALINK_RT3050=y -CONFIG_NET_RALINK_SOC=y -# CONFIG_NET_VENDOR_MEDIATEK is not set -CONFIG_NET_VENDOR_RALINK=y -CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DRIVERS_LEGACY=y -# CONFIG_PCI_MT7621 is not set -# CONFIG_PCI_MT7621_PHY is not set -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHY_RALINK_USB=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_RT2880=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_RALINK=y -# CONFIG_RALINK_WDT is not set -CONFIG_REGMAP=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_RESET_CONTROLLER=y -CONFIG_SERIAL_8250_NR_UARTS=3 -CONFIG_SERIAL_8250_RUNTIME_UARTS=3 -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_OF_PLATFORM=y -CONFIG_SOC_MT7620=y -# CONFIG_SOC_MT7621 is not set -# CONFIG_SOC_RT288X is not set -# CONFIG_SOC_RT305X is not set -# CONFIG_SOC_RT3883 is not set -CONFIG_SPI=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -CONFIG_SPI_MT7621=y -# CONFIG_SPI_RT2880 is not set -CONFIG_SRCU=y -CONFIG_SWCONFIG=y -CONFIG_SWCONFIG_LEDS=y -CONFIG_SWPHY=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_SYS_SUPPORTS_MIPS16=y -CONFIG_SYS_SUPPORTS_ZBOOT=y -CONFIG_TARGET_ISA_REV=2 -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TINY_SRCU=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -CONFIG_WATCHDOG_CORE=y diff --git a/target/linux/ramips/patches-5.10/020-mips-ralink-manage-low-reset-lines.patch b/target/linux/ramips/patches-5.10/020-mips-ralink-manage-low-reset-lines.patch deleted file mode 100644 index bdf98f223cbf..000000000000 --- a/target/linux/ramips/patches-5.10/020-mips-ralink-manage-low-reset-lines.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 3f9ef7785a9cd69cb75f5e2ea4ca79a24752e496 Mon Sep 17 00:00:00 2001 -From: Sander Vanheule -Date: Wed, 3 Feb 2021 10:21:41 +0100 -Subject: MIPS: ralink: manage low reset lines - -Reset lines with indices smaller than 8 are currently considered invalid -by the rt2880-reset reset controller. - -The MT7621 SoC uses a number of these low reset lines. The DTS defines -reset lines "hsdma", "fe", and "mcm" with respective values 5, 6, and 2. -As a result of the above restriction, these resets cannot be asserted or -de-asserted by the reset controller. In cases where the bootloader does -not de-assert these lines, this results in e.g. the MT7621's internal -switch staying in reset. - -Change the reset controller to only ignore the system reset, so all -reset lines with index greater than 0 are considered valid. - -Signed-off-by: Sander Vanheule -Acked-by: John Crispin -Signed-off-by: Thomas Bogendoerfer ---- - arch/mips/ralink/reset.c | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/mips/ralink/reset.c -+++ b/arch/mips/ralink/reset.c -@@ -27,7 +27,7 @@ static int ralink_assert_device(struct r - { - u32 val; - -- if (id < 8) -+ if (id == 0) - return -1; - - val = rt_sysc_r32(SYSC_REG_RESET_CTRL); -@@ -42,7 +42,7 @@ static int ralink_deassert_device(struct - { - u32 val; - -- if (id < 8) -+ if (id == 0) - return -1; - - val = rt_sysc_r32(SYSC_REG_RESET_CTRL); diff --git a/target/linux/ramips/patches-5.10/200-add-ralink-eth.patch b/target/linux/ramips/patches-5.10/200-add-ralink-eth.patch deleted file mode 100644 index 9aa8cb518055..000000000000 --- a/target/linux/ramips/patches-5.10/200-add-ralink-eth.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/drivers/net/ethernet/Kconfig -+++ b/drivers/net/ethernet/Kconfig -@@ -158,6 +158,7 @@ source "drivers/net/ethernet/pasemi/Kcon - source "drivers/net/ethernet/pensando/Kconfig" - source "drivers/net/ethernet/qlogic/Kconfig" - source "drivers/net/ethernet/qualcomm/Kconfig" -+source "drivers/net/ethernet/ralink/Kconfig" - source "drivers/net/ethernet/rdc/Kconfig" - source "drivers/net/ethernet/realtek/Kconfig" - source "drivers/net/ethernet/renesas/Kconfig" ---- a/drivers/net/ethernet/Makefile -+++ b/drivers/net/ethernet/Makefile -@@ -71,6 +71,7 @@ obj-$(CONFIG_NET_VENDOR_PACKET_ENGINES) - obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/ - obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/ - obj-$(CONFIG_NET_VENDOR_QUALCOMM) += qualcomm/ -+obj-$(CONFIG_NET_VENDOR_RALINK) += ralink/ - obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/ - obj-$(CONFIG_NET_VENDOR_RENESAS) += renesas/ - obj-$(CONFIG_NET_VENDOR_RDC) += rdc/ diff --git a/target/linux/ramips/patches-5.10/202-weak_reordering.patch b/target/linux/ramips/patches-5.10/202-weak_reordering.patch deleted file mode 100644 index 074e16642ff1..000000000000 --- a/target/linux/ramips/patches-5.10/202-weak_reordering.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/arch/mips/ralink/Kconfig -+++ b/arch/mips/ralink/Kconfig -@@ -57,6 +57,7 @@ choice - select CLKSRC_MIPS_GIC - select HAVE_PCI if PCI_MT7621 - select SOC_BUS -+ select WEAK_REORDERING_BEYOND_LLSC - endchoice - - choice diff --git a/target/linux/ramips/patches-5.10/203-staging-mt7621-pci-phy-kconfig-select-regmap-mmio.patch b/target/linux/ramips/patches-5.10/203-staging-mt7621-pci-phy-kconfig-select-regmap-mmio.patch deleted file mode 100644 index e6c5db4db74d..000000000000 --- a/target/linux/ramips/patches-5.10/203-staging-mt7621-pci-phy-kconfig-select-regmap-mmio.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/drivers/staging/mt7621-pci-phy/Kconfig -+++ b/drivers/staging/mt7621-pci-phy/Kconfig -@@ -3,6 +3,7 @@ config PCI_MT7621_PHY - tristate "MediaTek MT7621 PCI PHY Driver" - depends on RALINK && OF - select GENERIC_PHY -+ select REGMAP_MMIO - help - Say 'Y' here to add support for MediaTek MT7621 PCI PHY driver, - diff --git a/target/linux/ramips/patches-5.10/300-mt7620-export-chip-version-and-pkg.patch b/target/linux/ramips/patches-5.10/300-mt7620-export-chip-version-and-pkg.patch deleted file mode 100644 index 8b4335eb03c3..000000000000 --- a/target/linux/ramips/patches-5.10/300-mt7620-export-chip-version-and-pkg.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/arch/mips/include/asm/mach-ralink/mt7620.h -+++ b/arch/mips/include/asm/mach-ralink/mt7620.h -@@ -135,4 +135,16 @@ static inline int mt7620_get_eco(void) - return rt_sysc_r32(SYSC_REG_CHIP_REV) & CHIP_REV_ECO_MASK; - } - -+static inline int mt7620_get_chipver(void) -+{ -+ return (rt_sysc_r32(SYSC_REG_CHIP_REV) >> CHIP_REV_VER_SHIFT) & -+ CHIP_REV_VER_MASK; -+} -+ -+static inline int mt7620_get_pkg(void) -+{ -+ return (rt_sysc_r32(SYSC_REG_CHIP_REV) >> CHIP_REV_PKG_SHIFT) & -+ CHIP_REV_PKG_MASK; -+} -+ - #endif diff --git a/target/linux/ramips/patches-5.10/310-MIPS-Fix-memory-reservation-in-bootmem_init-for-cert.patch b/target/linux/ramips/patches-5.10/310-MIPS-Fix-memory-reservation-in-bootmem_init-for-cert.patch deleted file mode 100644 index 987ffbf3c41a..000000000000 --- a/target/linux/ramips/patches-5.10/310-MIPS-Fix-memory-reservation-in-bootmem_init-for-cert.patch +++ /dev/null @@ -1,45 +0,0 @@ -From: Tobias Wolf -Subject: [v2] MIPS: Fix memory reservation in bootmem_init for certain non-usermem setups - -Commit 67a3ba25aa95 ("MIPS: Fix incorrect mem=X@Y handling") introduced a new -issue for rt288x where "PHYS_OFFSET" is 0x0 but the calculated "ramstart" is -not. As the prerequisite of custom memory map has been removed, this results -in the full memory range of 0x0 - 0x8000000 to be marked as reserved for this -platform. - -v2: Correctly compare that usermem is not null. - -This patch adds the originally intended prerequisite again. - -Signed-off-by: Tobias Wolf ---- - ---- a/arch/mips/kernel/setup.c -+++ b/arch/mips/kernel/setup.c -@@ -249,6 +249,8 @@ static unsigned long __init init_initrd( - * Initialize the bootmem allocator. It also setup initrd related data - * if needed. - */ -+static int usermem __initdata; -+ - #if defined(CONFIG_SGI_IP27) || (defined(CONFIG_CPU_LOONGSON64) && defined(CONFIG_NUMA)) - - static void __init bootmem_init(void) -@@ -288,7 +290,7 @@ static void __init bootmem_init(void) - /* - * Reserve any memory between the start of RAM and PHYS_OFFSET - */ -- if (ramstart > PHYS_OFFSET) -+ if (usermem && ramstart > PHYS_OFFSET) - memblock_reserve(PHYS_OFFSET, ramstart - PHYS_OFFSET); - - if (PFN_UP(ramstart) > ARCH_PFN_OFFSET) { -@@ -336,8 +338,6 @@ static void __init bootmem_init(void) - - #endif /* CONFIG_SGI_IP27 */ - --static int usermem __initdata; -- - static int __init early_parse_mem(char *p) - { - phys_addr_t start, size; diff --git a/target/linux/ramips/patches-5.10/311-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch b/target/linux/ramips/patches-5.10/311-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch deleted file mode 100644 index a0b81bc6c511..000000000000 --- a/target/linux/ramips/patches-5.10/311-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch +++ /dev/null @@ -1,100 +0,0 @@ -From ce3d4a4111a5f7e6b4e74bceae5faa6ce388e8ec Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Sun, 14 Jul 2013 23:08:11 +0200 -Subject: [PATCH 05/53] MIPS: use set_mode() to enable/disable the cevt-r4k - irq - -Signed-off-by: John Crispin ---- - arch/mips/ralink/Kconfig | 5 +++++ - 1 file changed, 5 insertions(+) - ---- a/arch/mips/ralink/Kconfig -+++ b/arch/mips/ralink/Kconfig -@@ -1,12 +1,17 @@ - # SPDX-License-Identifier: GPL-2.0 - if RALINK - -+config CEVT_SYSTICK_QUIRK -+ bool -+ default n -+ - config CLKEVT_RT3352 - bool - depends on SOC_RT305X || SOC_MT7620 - default y - select TIMER_OF - select CLKSRC_MMIO -+ select CEVT_SYSTICK_QUIRK - - config RALINK_ILL_ACC - bool ---- a/arch/mips/kernel/cevt-r4k.c -+++ b/arch/mips/kernel/cevt-r4k.c -@@ -16,6 +16,31 @@ - #include - #include - -+#ifdef CONFIG_CEVT_SYSTICK_QUIRK -+static int mips_state_oneshot(struct clock_event_device *evt) -+{ -+ unsigned long flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED; -+ if (!cp0_timer_irq_installed) { -+ cp0_timer_irq_installed = 1; -+ if (request_irq(evt->irq, c0_compare_interrupt, flags, "timer", -+ c0_compare_interrupt)) -+ pr_err("Failed to request irq %d (timer)\n", evt->irq); -+ } -+ -+ return 0; -+} -+ -+static int mips_state_shutdown(struct clock_event_device *evt) -+{ -+ if (cp0_timer_irq_installed) { -+ cp0_timer_irq_installed = 0; -+ free_irq(evt->irq, NULL); -+ } -+ -+ return 0; -+} -+#endif -+ - static int mips_next_event(unsigned long delta, - struct clock_event_device *evt) - { -@@ -296,7 +321,9 @@ core_initcall(r4k_register_cpufreq_notif - - int r4k_clockevent_init(void) - { -+#ifndef CONFIG_CEVT_SYSTICK_QUIRK - unsigned long flags = IRQF_PERCPU | IRQF_TIMER | IRQF_SHARED; -+#endif - unsigned int cpu = smp_processor_id(); - struct clock_event_device *cd; - unsigned int irq, min_delta; -@@ -326,11 +353,16 @@ int r4k_clockevent_init(void) - cd->rating = 300; - cd->irq = irq; - cd->cpumask = cpumask_of(cpu); -+#ifdef CONFIG_CEVT_SYSTICK_QUIRK -+ cd->set_state_shutdown = mips_state_shutdown; -+ cd->set_state_oneshot = mips_state_oneshot; -+#endif - cd->set_next_event = mips_next_event; - cd->event_handler = mips_event_handler; - - clockevents_config_and_register(cd, mips_hpt_frequency, min_delta, 0x7fffffff); - -+#ifndef CONFIG_CEVT_SYSTICK_QUIRK - if (cp0_timer_irq_installed) - return 0; - -@@ -339,6 +371,7 @@ int r4k_clockevent_init(void) - if (request_irq(irq, c0_compare_interrupt, flags, "timer", - c0_compare_interrupt)) - pr_err("Failed to request irq %d (timer)\n", irq); -+#endif - - return 0; - } diff --git a/target/linux/ramips/patches-5.10/312-MIPS-ralink-add-cpu-frequency-scaling.patch b/target/linux/ramips/patches-5.10/312-MIPS-ralink-add-cpu-frequency-scaling.patch deleted file mode 100644 index 0d70770941ec..000000000000 --- a/target/linux/ramips/patches-5.10/312-MIPS-ralink-add-cpu-frequency-scaling.patch +++ /dev/null @@ -1,195 +0,0 @@ -From bd30f19a006fb52bac80c6463c49dd2f4159f4ac Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Sun, 28 Jul 2013 16:26:41 +0200 -Subject: [PATCH 06/53] MIPS: ralink: add cpu frequency scaling - -This feature will break udelay() and cause the delay loop to have longer delays -when the frequency is scaled causing a performance hit. - -Signed-off-by: John Crispin ---- - arch/mips/ralink/cevt-rt3352.c | 38 ++++++++++++++++++++++++++++++++++++++ - 1 file changed, 38 insertions(+) - ---- a/arch/mips/ralink/cevt-rt3352.c -+++ b/arch/mips/ralink/cevt-rt3352.c -@@ -29,6 +29,10 @@ - /* enable the counter */ - #define CFG_CNT_EN 0x1 - -+/* mt7620 frequency scaling defines */ -+#define CLK_LUT_CFG 0x40 -+#define SLEEP_EN BIT(31) -+ - struct systick_device { - void __iomem *membase; - struct clock_event_device dev; -@@ -36,21 +40,53 @@ struct systick_device { - int freq_scale; - }; - -+static void (*systick_freq_scaling)(struct systick_device *sdev, int status); -+ - static int systick_set_oneshot(struct clock_event_device *evt); - static int systick_shutdown(struct clock_event_device *evt); - -+static inline void mt7620_freq_scaling(struct systick_device *sdev, int status) -+{ -+ if (sdev->freq_scale == status) -+ return; -+ -+ sdev->freq_scale = status; -+ -+ pr_info("%s: %s autosleep mode\n", sdev->dev.name, -+ (status) ? ("enable") : ("disable")); -+ if (status) -+ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) | SLEEP_EN, CLK_LUT_CFG); -+ else -+ rt_sysc_w32(rt_sysc_r32(CLK_LUT_CFG) & ~SLEEP_EN, CLK_LUT_CFG); -+} -+ -+static inline unsigned int read_count(struct systick_device *sdev) -+{ -+ return ioread32(sdev->membase + SYSTICK_COUNT); -+} -+ -+static inline unsigned int read_compare(struct systick_device *sdev) -+{ -+ return ioread32(sdev->membase + SYSTICK_COMPARE); -+} -+ -+static inline void write_compare(struct systick_device *sdev, unsigned int val) -+{ -+ iowrite32(val, sdev->membase + SYSTICK_COMPARE); -+} -+ - static int systick_next_event(unsigned long delta, - struct clock_event_device *evt) - { - struct systick_device *sdev; -- u32 count; -+ int res; - - sdev = container_of(evt, struct systick_device, dev); -- count = ioread32(sdev->membase + SYSTICK_COUNT); -- count = (count + delta) % SYSTICK_FREQ; -- iowrite32(count, sdev->membase + SYSTICK_COMPARE); -+ delta += read_count(sdev); -+ write_compare(sdev, delta); -+ res = ((int)(read_count(sdev) - delta) >= 0) ? -ETIME : 0; - -- return 0; -+ return res; - } - - static void systick_event_handler(struct clock_event_device *dev) -@@ -60,20 +96,25 @@ static void systick_event_handler(struct - - static irqreturn_t systick_interrupt(int irq, void *dev_id) - { -- struct clock_event_device *dev = (struct clock_event_device *) dev_id; -+ int ret = 0; -+ struct clock_event_device *cdev; -+ struct systick_device *sdev; - -- dev->event_handler(dev); -+ if (read_c0_cause() & STATUSF_IP7) { -+ cdev = (struct clock_event_device *) dev_id; -+ sdev = container_of(cdev, struct systick_device, dev); -+ -+ /* Clear Count/Compare Interrupt */ -+ write_compare(sdev, read_compare(sdev)); -+ cdev->event_handler(cdev); -+ ret = 1; -+ } - -- return IRQ_HANDLED; -+ return IRQ_RETVAL(ret); - } - - static struct systick_device systick = { - .dev = { -- /* -- * cevt-r4k uses 300, make sure systick -- * gets used if available -- */ -- .rating = 310, - .features = CLOCK_EVT_FEAT_ONESHOT, - .set_next_event = systick_next_event, - .set_state_shutdown = systick_shutdown, -@@ -91,7 +132,13 @@ static int systick_shutdown(struct clock - if (sdev->irq_requested) - free_irq(systick.dev.irq, &systick.dev); - sdev->irq_requested = 0; -- iowrite32(0, systick.membase + SYSTICK_CONFIG); -+ iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG); -+ -+ if (systick_freq_scaling) -+ systick_freq_scaling(sdev, 0); -+ -+ if (systick_freq_scaling) -+ systick_freq_scaling(sdev, 1); - - return 0; - } -@@ -116,33 +163,46 @@ static int systick_set_oneshot(struct cl - return 0; - } - -+static const struct of_device_id systick_match[] = { -+ { .compatible = "ralink,mt7620a-systick", .data = mt7620_freq_scaling}, -+ {}, -+}; -+ - static int __init ralink_systick_init(struct device_node *np) - { -- int ret; -+ const struct of_device_id *match; -+ int rating = 200; - - systick.membase = of_iomap(np, 0); - if (!systick.membase) - return -ENXIO; - -- systick.dev.name = np->name; -- clockevents_calc_mult_shift(&systick.dev, SYSTICK_FREQ, 60); -- systick.dev.max_delta_ns = clockevent_delta2ns(0x7fff, &systick.dev); -- systick.dev.max_delta_ticks = 0x7fff; -- systick.dev.min_delta_ns = clockevent_delta2ns(0x3, &systick.dev); -- systick.dev.min_delta_ticks = 0x3; -+ match = of_match_node(systick_match, np); -+ if (match) { -+ systick_freq_scaling = match->data; -+ /* -+ * cevt-r4k uses 300, make sure systick -+ * gets used if available -+ */ -+ rating = 310; -+ } -+ -+ /* enable counter than register clock source */ -+ iowrite32(CFG_CNT_EN, systick.membase + SYSTICK_CONFIG); -+ clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name, -+ SYSTICK_FREQ, rating, 16, clocksource_mmio_readl_up); -+ -+ /* register clock event */ - systick.dev.irq = irq_of_parse_and_map(np, 0); - if (!systick.dev.irq) { - pr_err("%pOFn: request_irq failed", np); - return -EINVAL; - } - -- ret = clocksource_mmio_init(systick.membase + SYSTICK_COUNT, np->name, -- SYSTICK_FREQ, 301, 16, -- clocksource_mmio_readl_up); -- if (ret) -- return ret; -- -- clockevents_register_device(&systick.dev); -+ systick.dev.name = np->name; -+ systick.dev.rating = rating; -+ systick.dev.cpumask = cpumask_of(0); -+ clockevents_config_and_register(&systick.dev, SYSTICK_FREQ, 0x3, 0x7fff); - - pr_info("%pOFn: running - mult: %d, shift: %d\n", - np, systick.dev.mult, systick.dev.shift); diff --git a/target/linux/ramips/patches-5.10/313-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch b/target/linux/ramips/patches-5.10/313-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch deleted file mode 100644 index 54af571d85d2..000000000000 --- a/target/linux/ramips/patches-5.10/313-MIPS-ralink-copy-the-commandline-from-the-devicetree.patch +++ /dev/null @@ -1,21 +0,0 @@ -From 67b7bff0fd364c194e653f69baa623ba2141bd4c Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 4 Aug 2014 18:46:02 +0200 -Subject: [PATCH 07/53] MIPS: ralink: copy the commandline from the devicetree - -Signed-off-by: John Crispin ---- - arch/mips/ralink/of.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/arch/mips/ralink/of.c -+++ b/arch/mips/ralink/of.c -@@ -80,6 +80,8 @@ void __init plat_mem_setup(void) - - __dt_setup_arch(dtb); - -+ strlcpy(arcs_cmdline, boot_command_line, COMMAND_LINE_SIZE); -+ - of_scan_flat_dt(early_init_dt_find_memory, NULL); - if (memory_dtb) - of_scan_flat_dt(early_init_dt_scan_memory, NULL); diff --git a/target/linux/ramips/patches-5.10/314-MIPS-add-bootargs-override-property.patch b/target/linux/ramips/patches-5.10/314-MIPS-add-bootargs-override-property.patch deleted file mode 100644 index a5df046ba745..000000000000 --- a/target/linux/ramips/patches-5.10/314-MIPS-add-bootargs-override-property.patch +++ /dev/null @@ -1,63 +0,0 @@ -From f15d27f9c90ede4b16eb37f9ae573ef81c2b6996 Mon Sep 17 00:00:00 2001 -From: David Bauer -Date: Thu, 31 Dec 2020 18:49:12 +0100 -Subject: [PATCH] MIPS: add bootargs-override property - -Add support for the bootargs-override property to the chosen node -similar to the one used on ipq806x or mpc85xx. - -This is necessary, as the U-Boot used on some boards, notably the -Ubiquiti UniFi 6 Lite, overwrite the bootargs property of the chosen -node leading to a kernel panic when loading OpenWrt. - -Signed-off-by: David Bauer ---- - arch/mips/kernel/setup.c | 30 ++++++++++++++++++++++++++++++ - 1 file changed, 30 insertions(+) - ---- a/arch/mips/kernel/setup.c -+++ b/arch/mips/kernel/setup.c -@@ -542,8 +542,28 @@ static int __init bootcmdline_scan_chose - - #endif /* CONFIG_OF_EARLY_FLATTREE */ - -+static int __init bootcmdline_scan_chosen_override(unsigned long node, const char *uname, -+ int depth, void *data) -+{ -+ bool *dt_bootargs = data; -+ const char *p; -+ int l; -+ -+ if (depth != 1 || !data || strcmp(uname, "chosen") != 0) -+ return 0; -+ -+ p = of_get_flat_dt_prop(node, "bootargs-override", &l); -+ if (p != NULL && l > 0) { -+ strlcpy(boot_command_line, p, COMMAND_LINE_SIZE); -+ *dt_bootargs = true; -+ } -+ -+ return 1; -+} -+ - static void __init bootcmdline_init(void) - { -+ bool dt_bootargs_override = false; - bool dt_bootargs = false; - - /* -@@ -557,6 +577,14 @@ static void __init bootcmdline_init(void - } - - /* -+ * If bootargs-override in the chosen node is set, use this as the -+ * command line -+ */ -+ of_scan_flat_dt(bootcmdline_scan_chosen_override, &dt_bootargs_override); -+ if (dt_bootargs_override) -+ return; -+ -+ /* - * If the user specified a built-in command line & - * MIPS_CMDLINE_BUILTIN_EXTEND, then the built-in command line is - * prepended to arguments from the bootloader or DT so we'll copy them diff --git a/target/linux/ramips/patches-5.10/315-owrt-hack-fix-mt7688-cache-issue.patch b/target/linux/ramips/patches-5.10/315-owrt-hack-fix-mt7688-cache-issue.patch deleted file mode 100644 index 59d4b3ce564f..000000000000 --- a/target/linux/ramips/patches-5.10/315-owrt-hack-fix-mt7688-cache-issue.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 5ede027f6c4a57ed25da872420508b7f1168b36b Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 7 Dec 2015 17:15:32 +0100 -Subject: [PATCH 13/53] owrt: hack: fix mt7688 cache issue - -Signed-off-by: John Crispin ---- - arch/mips/kernel/setup.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/mips/kernel/setup.c -+++ b/arch/mips/kernel/setup.c -@@ -694,8 +694,6 @@ static void __init arch_mem_init(char ** - if (crashk_res.start != crashk_res.end) - memblock_reserve(crashk_res.start, resource_size(&crashk_res)); - #endif -- device_tree_init(); -- - /* - * In order to reduce the possibility of kernel panic when failed to - * get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate -@@ -815,6 +813,7 @@ void __init setup_arch(char **cmdline_p) - - cpu_cache_init(); - paging_init(); -+ device_tree_init(); - } - - unsigned long kernelsp[NR_CPUS]; diff --git a/target/linux/ramips/patches-5.10/316-arch-mips-do-not-select-illegal-access-driver-by-def.patch b/target/linux/ramips/patches-5.10/316-arch-mips-do-not-select-illegal-access-driver-by-def.patch deleted file mode 100644 index 1dc54ccf2326..000000000000 --- a/target/linux/ramips/patches-5.10/316-arch-mips-do-not-select-illegal-access-driver-by-def.patch +++ /dev/null @@ -1,25 +0,0 @@ -From 9e6ce539092a1dd605a20bf73c655a9de58d8641 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 7 Dec 2015 17:18:05 +0100 -Subject: [PATCH 15/53] arch: mips: do not select illegal access driver by - default - -Signed-off-by: John Crispin ---- - arch/mips/ralink/Kconfig | 4 ++-- - 1 file changed, 2 insertions(+), 2 deletions(-) - ---- a/arch/mips/ralink/Kconfig -+++ b/arch/mips/ralink/Kconfig -@@ -14,9 +14,9 @@ config CLKEVT_RT3352 - select CEVT_SYSTICK_QUIRK - - config RALINK_ILL_ACC -- bool -+ bool "illegal access irq" - depends on SOC_RT305X -- default y -+ default n - - config IRQ_INTC - bool diff --git a/target/linux/ramips/patches-5.10/320-mt7621-core-detect-hack.patch b/target/linux/ramips/patches-5.10/320-mt7621-core-detect-hack.patch deleted file mode 100644 index c63f0f4c1ec7..000000000000 --- a/target/linux/ramips/patches-5.10/320-mt7621-core-detect-hack.patch +++ /dev/null @@ -1,61 +0,0 @@ -There is a variant of MT7621 which contains only one CPU core instead of 2. -This is not reflected in the config register, so the kernel detects more -physical cores, which leads to a hang on SMP bringup. -Add a hack to detect missing cores. - -Signed-off-by: Felix Fietkau - ---- a/arch/mips/kernel/smp-cps.c -+++ b/arch/mips/kernel/smp-cps.c -@@ -43,6 +43,11 @@ static unsigned core_vpe_count(unsigned - return mips_cps_numvps(cluster, core); - } - -+bool __weak plat_cpu_core_present(int core) -+{ -+ return true; -+} -+ - static void __init cps_smp_setup(void) - { - unsigned int nclusters, ncores, nvpes, core_vpes; -@@ -60,6 +65,8 @@ static void __init cps_smp_setup(void) - - ncores = mips_cps_numcores(cl); - for (c = 0; c < ncores; c++) { -+ if (!plat_cpu_core_present(c)) -+ continue; - core_vpes = core_vpe_count(cl, c); - - if (c > 0) ---- a/arch/mips/ralink/mt7621.c -+++ b/arch/mips/ralink/mt7621.c -@@ -15,6 +15,7 @@ - #include - #include - #include -+#include - - #include - -@@ -146,6 +147,20 @@ static void soc_dev_init(struct ralink_s - } - } - -+bool plat_cpu_core_present(int core) -+{ -+ struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); -+ -+ if (!core) -+ return true; -+ launch += core * 2; /* 2 VPEs per core */ -+ if (!(launch->flags & LAUNCH_FREADY)) -+ return false; -+ if (launch->flags & (LAUNCH_FGO | LAUNCH_FGONE)) -+ return false; -+ return true; -+} -+ - void prom_soc_init(struct ralink_soc_info *soc_info) - { - void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE); diff --git a/target/linux/ramips/patches-5.10/321-mt7621-timer.patch b/target/linux/ramips/patches-5.10/321-mt7621-timer.patch deleted file mode 100644 index 91e14ad63b8a..000000000000 --- a/target/linux/ramips/patches-5.10/321-mt7621-timer.patch +++ /dev/null @@ -1,87 +0,0 @@ ---- a/arch/mips/ralink/mt7621.c -+++ b/arch/mips/ralink/mt7621.c -@@ -9,6 +9,7 @@ - #include - #include - #include -+#include - - #include - #include -@@ -16,6 +17,7 @@ - #include - #include - #include -+#include - - #include - -@@ -161,6 +163,58 @@ bool plat_cpu_core_present(int core) - return true; - } - -+#define LPS_PREC 8 -+/* -+* Re-calibration lpj(loop-per-jiffy). -+* (derived from kernel/calibrate.c) -+*/ -+static int udelay_recal(void) -+{ -+ unsigned int i, lpj = 0; -+ unsigned long ticks, loopbit; -+ int lps_precision = LPS_PREC; -+ -+ lpj = (1<<12); -+ -+ while ((lpj <<= 1) != 0) { -+ /* wait for "start of" clock tick */ -+ ticks = jiffies; -+ while (ticks == jiffies) -+ /* nothing */; -+ -+ /* Go .. */ -+ ticks = jiffies; -+ __delay(lpj); -+ ticks = jiffies - ticks; -+ if (ticks) -+ break; -+ } -+ -+ /* -+ * Do a binary approximation to get lpj set to -+ * equal one clock (up to lps_precision bits) -+ */ -+ lpj >>= 1; -+ loopbit = lpj; -+ while (lps_precision-- && (loopbit >>= 1)) { -+ lpj |= loopbit; -+ ticks = jiffies; -+ while (ticks == jiffies) -+ /* nothing */; -+ ticks = jiffies; -+ __delay(lpj); -+ if (jiffies != ticks) /* longer than 1 tick */ -+ lpj &= ~loopbit; -+ } -+ printk(KERN_INFO "%d CPUs re-calibrate udelay(lpj = %d)\n", NR_CPUS, lpj); -+ -+ for(i=0; i< NR_CPUS; i++) -+ cpu_data[i].udelay_val = lpj; -+ -+ return 0; -+} -+device_initcall(udelay_recal); -+ - void prom_soc_init(struct ralink_soc_info *soc_info) - { - void __iomem *sysc = (void __iomem *) KSEG1ADDR(MT7621_SYSC_BASE); ---- a/arch/mips/ralink/Kconfig -+++ b/arch/mips/ralink/Kconfig -@@ -63,6 +63,7 @@ choice - select HAVE_PCI if PCI_MT7621 - select SOC_BUS - select WEAK_REORDERING_BEYOND_LLSC -+ select GENERIC_CLOCKEVENTS_BROADCAST - endchoice - - choice diff --git a/target/linux/ramips/patches-5.10/322-mt7621-fix-cpu-clk-add-clkdev.patch b/target/linux/ramips/patches-5.10/322-mt7621-fix-cpu-clk-add-clkdev.patch deleted file mode 100644 index 723c62879036..000000000000 --- a/target/linux/ramips/patches-5.10/322-mt7621-fix-cpu-clk-add-clkdev.patch +++ /dev/null @@ -1,187 +0,0 @@ ---- a/arch/mips/include/asm/mach-ralink/mt7621.h -+++ b/arch/mips/include/asm/mach-ralink/mt7621.h -@@ -17,6 +17,10 @@ - #define SYSC_REG_CHIP_REV 0x0c - #define SYSC_REG_SYSTEM_CONFIG0 0x10 - #define SYSC_REG_SYSTEM_CONFIG1 0x14 -+#define SYSC_REG_CLKCFG0 0x2c -+#define SYSC_REG_CUR_CLK_STS 0x44 -+ -+#define MEMC_REG_CPU_PLL 0x648 - - #define CHIP_REV_PKG_MASK 0x1 - #define CHIP_REV_PKG_SHIFT 16 -@@ -24,6 +28,22 @@ - #define CHIP_REV_VER_SHIFT 8 - #define CHIP_REV_ECO_MASK 0xf - -+#define XTAL_MODE_SEL_MASK 0x7 -+#define XTAL_MODE_SEL_SHIFT 6 -+ -+#define CPU_CLK_SEL_MASK 0x3 -+#define CPU_CLK_SEL_SHIFT 30 -+ -+#define CUR_CPU_FDIV_MASK 0x1f -+#define CUR_CPU_FDIV_SHIFT 8 -+#define CUR_CPU_FFRAC_MASK 0x1f -+#define CUR_CPU_FFRAC_SHIFT 0 -+ -+#define CPU_PLL_PREDIV_MASK 0x3 -+#define CPU_PLL_PREDIV_SHIFT 12 -+#define CPU_PLL_FBDIV_MASK 0x7f -+#define CPU_PLL_FBDIV_SHIFT 4 -+ - #define MT7621_DRAM_BASE 0x0 - #define MT7621_DDR2_SIZE_MIN 32 - #define MT7621_DDR2_SIZE_MAX 256 ---- a/arch/mips/ralink/mt7621.c -+++ b/arch/mips/ralink/mt7621.c -@@ -10,6 +10,10 @@ - #include - #include - #include -+#include -+#include -+#include -+#include - - #include - #include -@@ -18,6 +22,7 @@ - #include - #include - #include -+#include - - #include - -@@ -108,11 +113,89 @@ static struct rt2880_pmx_group mt7621_pi - { 0 } - }; - -+static struct clk *clks[MT7621_CLK_MAX]; -+static struct clk_onecell_data clk_data = { -+ .clks = clks, -+ .clk_num = ARRAY_SIZE(clks), -+}; -+ - phys_addr_t mips_cpc_default_phys_base(void) - { - panic("Cannot detect cpc address"); - } - -+static struct clk *__init mt7621_add_sys_clkdev( -+ const char *id, unsigned long rate) -+{ -+ struct clk *clk; -+ int err; -+ -+ clk = clk_register_fixed_rate(NULL, id, NULL, 0, rate); -+ if (IS_ERR(clk)) -+ panic("failed to allocate %s clock structure", id); -+ -+ err = clk_register_clkdev(clk, id, NULL); -+ if (err) -+ panic("unable to register %s clock device", id); -+ -+ return clk; -+} -+ -+void __init ralink_clk_init(void) -+{ -+ u32 syscfg, xtal_sel, clkcfg, clk_sel, curclk, ffiv, ffrac; -+ u32 pll, prediv, fbdiv; -+ u32 xtal_clk, cpu_clk, bus_clk; -+ const static u32 prediv_tbl[] = {0, 1, 2, 2}; -+ -+ syscfg = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG0); -+ xtal_sel = (syscfg >> XTAL_MODE_SEL_SHIFT) & XTAL_MODE_SEL_MASK; -+ -+ clkcfg = rt_sysc_r32(SYSC_REG_CLKCFG0); -+ clk_sel = (clkcfg >> CPU_CLK_SEL_SHIFT) & CPU_CLK_SEL_MASK; -+ -+ curclk = rt_sysc_r32(SYSC_REG_CUR_CLK_STS); -+ ffiv = (curclk >> CUR_CPU_FDIV_SHIFT) & CUR_CPU_FDIV_MASK; -+ ffrac = (curclk >> CUR_CPU_FFRAC_SHIFT) & CUR_CPU_FFRAC_MASK; -+ -+ if (xtal_sel <= 2) -+ xtal_clk = 20 * 1000 * 1000; -+ else if (xtal_sel <= 5) -+ xtal_clk = 40 * 1000 * 1000; -+ else -+ xtal_clk = 25 * 1000 * 1000; -+ -+ switch (clk_sel) { -+ case 0: -+ cpu_clk = 500 * 1000 * 1000; -+ break; -+ case 1: -+ pll = rt_memc_r32(MEMC_REG_CPU_PLL); -+ fbdiv = (pll >> CPU_PLL_FBDIV_SHIFT) & CPU_PLL_FBDIV_MASK; -+ prediv = (pll >> CPU_PLL_PREDIV_SHIFT) & CPU_PLL_PREDIV_MASK; -+ cpu_clk = ((fbdiv + 1) * xtal_clk) >> prediv_tbl[prediv]; -+ break; -+ default: -+ cpu_clk = xtal_clk; -+ } -+ -+ cpu_clk = cpu_clk / ffiv * ffrac; -+ bus_clk = cpu_clk / 4; -+ -+ clks[MT7621_CLK_CPU] = mt7621_add_sys_clkdev("cpu", cpu_clk); -+ clks[MT7621_CLK_BUS] = mt7621_add_sys_clkdev("bus", bus_clk); -+ -+ pr_info("CPU Clock: %dMHz\n", cpu_clk / 1000000); -+ mips_hpt_frequency = cpu_clk / 2; -+} -+ -+static void __init mt7621_clocks_init_dt(struct device_node *np) -+{ -+ of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); -+} -+ -+CLK_OF_DECLARE(mt7621, "mediatek,mt7621-pll", mt7621_clocks_init_dt); -+ - void __init ralink_of_remap(void) - { - rt_sysc_membase = plat_of_remap_node("mtk,mt7621-sysc"); ---- a/arch/mips/ralink/timer-gic.c -+++ b/arch/mips/ralink/timer-gic.c -@@ -9,14 +9,14 @@ - - #include - #include --#include -+#include - - #include "common.h" - - void __init plat_time_init(void) - { - ralink_of_remap(); -- -+ ralink_clk_init(); - of_clk_init(NULL); - timer_probe(); - } ---- /dev/null -+++ b/include/dt-bindings/clock/mt7621-clk.h -@@ -0,0 +1,18 @@ -+/* -+ * Copyright (C) 2018 Weijie Gao -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ * -+ */ -+ -+#ifndef __DT_BINDINGS_MT7621_CLK_H -+#define __DT_BINDINGS_MT7621_CLK_H -+ -+#define MT7621_CLK_CPU 0 -+#define MT7621_CLK_BUS 1 -+ -+#define MT7621_CLK_MAX 2 -+ -+#endif /* __DT_BINDINGS_MT7621_CLK_H */ diff --git a/target/linux/ramips/patches-5.10/323-mt7621-memory-detect.patch b/target/linux/ramips/patches-5.10/323-mt7621-memory-detect.patch deleted file mode 100644 index 07c75886619b..000000000000 --- a/target/linux/ramips/patches-5.10/323-mt7621-memory-detect.patch +++ /dev/null @@ -1,129 +0,0 @@ -From b5a52351a66f3c2a7a207548aa87d78ff2d336c0 Mon Sep 17 00:00:00 2001 -From: Chuanhong Guo -Date: Wed, 10 Jul 2019 00:24:48 +0800 -Subject: [PATCH] MIPS: ralink: mt7621: add memory detection support - -mt7621 has the following memory map: -0x0-0x1c000000: lower 448m memory -0x1c000000-0x2000000: peripheral registers -0x20000000-0x2400000: higher 64m memory - -detect_memory_region in arch/mips/kernel/setup.c only add the first -memory region and isn't suitable for 512m memory detection because -it may accidentally read the memory area for peripheral registers. - -This commit adds memory detection capability for mt7621: -1. add the highmem area when 512m is detected. -2. guard memcmp from accessing peripheral registers: - This only happens when some weird user decided to change - kernel load address to 256m or higher address. Since this - is a quite unusual case, we just skip 512m testing and return - 256m as memory size. - -Signed-off-by: Chuanhong Guo ---- - arch/mips/include/asm/mach-ralink/mt7621.h | 7 ++--- - arch/mips/ralink/mt7621.c | 30 +++++++++++++++++++--- - 2 files changed, 30 insertions(+), 7 deletions(-) - ---- a/arch/mips/include/asm/mach-ralink/mt7621.h -+++ b/arch/mips/include/asm/mach-ralink/mt7621.h -@@ -44,9 +44,10 @@ - #define CPU_PLL_FBDIV_MASK 0x7f - #define CPU_PLL_FBDIV_SHIFT 4 - --#define MT7621_DRAM_BASE 0x0 --#define MT7621_DDR2_SIZE_MIN 32 --#define MT7621_DDR2_SIZE_MAX 256 -+#define MT7621_LOWMEM_BASE 0x0 -+#define MT7621_LOWMEM_MAX_SIZE 0x1C000000 -+#define MT7621_HIGHMEM_BASE 0x20000000 -+#define MT7621_HIGHMEM_SIZE 0x4000000 - - #define MT7621_CHIP_NAME0 0x3637544D - #define MT7621_CHIP_NAME1 0x20203132 ---- a/arch/mips/ralink/mt7621.c -+++ b/arch/mips/ralink/mt7621.c -@@ -10,11 +10,13 @@ - #include - #include - #include -+#include - #include - #include - #include - #include - -+#include - #include - #include - #include -@@ -57,6 +59,8 @@ - #define MT7621_GPIO_MODE_SDHCI_SHIFT 18 - #define MT7621_GPIO_MODE_SDHCI_GPIO 1 - -+static void *detect_magic __initdata = detect_memory_region; -+ - static struct rt2880_pmx_func uart1_grp[] = { FUNC("uart1", 0, 1, 2) }; - static struct rt2880_pmx_func i2c_grp[] = { FUNC("i2c", 0, 3, 2) }; - static struct rt2880_pmx_func uart3_grp[] = { -@@ -141,6 +145,26 @@ static struct clk *__init mt7621_add_sys - return clk; - } - -+void __init mt7621_memory_detect(void) -+{ -+ void *dm = &detect_magic; -+ phys_addr_t size; -+ -+ for (size = 32 * SZ_1M; size < 256 * SZ_1M; size <<= 1) { -+ if (!__builtin_memcmp(dm, dm + size, sizeof(detect_magic))) -+ break; -+ } -+ -+ if ((size == 256 * SZ_1M) && -+ (CPHYSADDR(dm + size) < MT7621_LOWMEM_MAX_SIZE) && -+ __builtin_memcmp(dm, dm + size, sizeof(detect_magic))) { -+ memblock_add(MT7621_LOWMEM_BASE, MT7621_LOWMEM_MAX_SIZE); -+ memblock_add(MT7621_HIGHMEM_BASE, MT7621_HIGHMEM_SIZE); -+ } else { -+ memblock_add(MT7621_LOWMEM_BASE, size); -+ } -+} -+ - void __init ralink_clk_init(void) - { - u32 syscfg, xtal_sel, clkcfg, clk_sel, curclk, ffiv, ffrac; -@@ -346,10 +370,7 @@ void prom_soc_init(struct ralink_soc_inf - (rev >> CHIP_REV_VER_SHIFT) & CHIP_REV_VER_MASK, - (rev & CHIP_REV_ECO_MASK)); - -- soc_info->mem_size_min = MT7621_DDR2_SIZE_MIN; -- soc_info->mem_size_max = MT7621_DDR2_SIZE_MAX; -- soc_info->mem_base = MT7621_DRAM_BASE; -- -+ soc_info->mem_detect = mt7621_memory_detect; - rt2880_pinmux_data = mt7621_pinmux_data; - - soc_dev_init(soc_info, rev); ---- a/arch/mips/ralink/common.h -+++ b/arch/mips/ralink/common.h -@@ -17,6 +17,7 @@ struct ralink_soc_info { - unsigned long mem_size; - unsigned long mem_size_min; - unsigned long mem_size_max; -+ void (*mem_detect)(void); - }; - extern struct ralink_soc_info soc_info; - ---- a/arch/mips/ralink/of.c -+++ b/arch/mips/ralink/of.c -@@ -85,6 +85,8 @@ void __init plat_mem_setup(void) - of_scan_flat_dt(early_init_dt_find_memory, NULL); - if (memory_dtb) - of_scan_flat_dt(early_init_dt_scan_memory, NULL); -+ else if (soc_info.mem_detect) -+ soc_info.mem_detect(); - else if (soc_info.mem_size) - memblock_add(soc_info.mem_base, soc_info.mem_size * SZ_1M); - else diff --git a/target/linux/ramips/patches-5.10/324-mt7621-perfctr-fix.patch b/target/linux/ramips/patches-5.10/324-mt7621-perfctr-fix.patch deleted file mode 100644 index dfeac7eb993d..000000000000 --- a/target/linux/ramips/patches-5.10/324-mt7621-perfctr-fix.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- a/arch/mips/ralink/irq-gic.c -+++ b/arch/mips/ralink/irq-gic.c -@@ -13,6 +13,12 @@ - - int get_c0_perfcount_int(void) - { -+ /* -+ * Performance counter events are routed through GIC. -+ * Prevent them from firing on CPU IRQ7 as well -+ */ -+ clear_c0_status(IE_SW0 << 7); -+ - return gic_get_c0_perfcount_int(); - } - EXPORT_SYMBOL_GPL(get_c0_perfcount_int); diff --git a/target/linux/ramips/patches-5.10/330-fix-pci-init-mt7620.patch b/target/linux/ramips/patches-5.10/330-fix-pci-init-mt7620.patch deleted file mode 100644 index 7c00d4c9ae17..000000000000 --- a/target/linux/ramips/patches-5.10/330-fix-pci-init-mt7620.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/arch/mips/pci/pci-mt7620.c -+++ b/arch/mips/pci/pci-mt7620.c -@@ -32,6 +32,7 @@ - #define PPLL_CFG1 0x9c - - #define PPLL_DRV 0xa0 -+#define PPLL_LD BIT(23) - #define PDRV_SW_SET BIT(31) - #define LC_CKDRVPD BIT(19) - #define LC_CKDRVOHZ BIT(18) -@@ -239,8 +240,8 @@ static int mt7620_pci_hw_init(struct pla - rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1); - mdelay(100); - -- if (!(rt_sysc_r32(PPLL_CFG1) & PDRV_SW_SET)) { -- dev_err(&pdev->dev, "MT7620 PPLL unlock\n"); -+ if (!(rt_sysc_r32(PPLL_CFG1) & PPLL_LD)) { -+ dev_err(&pdev->dev, "MT7620 PPLL is unlocked, aborting init\n"); - reset_control_assert(rstpcie0); - rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1); - return -1; diff --git a/target/linux/ramips/patches-5.10/400-mtd-cfi-cmdset-0002-force-word-write.patch b/target/linux/ramips/patches-5.10/400-mtd-cfi-cmdset-0002-force-word-write.patch deleted file mode 100644 index 7011bbe50b2d..000000000000 --- a/target/linux/ramips/patches-5.10/400-mtd-cfi-cmdset-0002-force-word-write.patch +++ /dev/null @@ -1,20 +0,0 @@ -From ee9081b2726a5ca8cde5497afdc5425e21ff8f8b Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 15 Jul 2013 00:39:21 +0200 -Subject: [PATCH 37/53] mtd: cfi cmdset 0002 force word write - ---- - drivers/mtd/chips/cfi_cmdset_0002.c | 9 +++++++-- - 1 file changed, 7 insertions(+), 2 deletions(-) - ---- a/drivers/mtd/chips/cfi_cmdset_0002.c -+++ b/drivers/mtd/chips/cfi_cmdset_0002.c -@@ -40,7 +40,7 @@ - #include - - #define AMD_BOOTLOC_BUG --#define FORCE_WORD_WRITE 0 -+#define FORCE_WORD_WRITE 1 - - #define MAX_RETRIES 3 - diff --git a/target/linux/ramips/patches-5.10/410-mtd-rawnand-add-driver-support-for-MT7621-nand-flash.patch b/target/linux/ramips/patches-5.10/410-mtd-rawnand-add-driver-support-for-MT7621-nand-flash.patch deleted file mode 100644 index a37426edecf9..000000000000 --- a/target/linux/ramips/patches-5.10/410-mtd-rawnand-add-driver-support-for-MT7621-nand-flash.patch +++ /dev/null @@ -1,1403 +0,0 @@ -From e84e2430ee0e483842b4ff013ae8a6e7e2fa2734 Mon Sep 17 00:00:00 2001 -From: Weijie Gao -Date: Wed, 1 Apr 2020 02:07:58 +0800 -Subject: [PATCH 1/2] mtd: rawnand: add driver support for MT7621 nand - flash controller - -This patch adds NAND flash controller driver for MediaTek MT7621 SoC. - -The NAND flash controller is similar with controllers described in -mtk_nand.c, except that the controller from MT7621 doesn't support DMA -transmission, and some registers' offset and fields are different. - -Signed-off-by: Weijie Gao ---- - drivers/mtd/nand/raw/Kconfig | 8 + - drivers/mtd/nand/raw/Makefile | 1 + - drivers/mtd/nand/raw/mt7621_nand.c | 1348 ++++++++++++++++++++++++++++++++++++ - 3 files changed, 1357 insertions(+) - create mode 100644 drivers/mtd/nand/raw/mt7621_nand.c - ---- a/drivers/mtd/nand/raw/Kconfig -+++ b/drivers/mtd/nand/raw/Kconfig -@@ -387,6 +387,14 @@ config MTD_NAND_QCOM - Enables support for NAND flash chips on SoCs containing the EBI2 NAND - controller. This controller is found on IPQ806x SoC. - -+config MTD_NAND_MT7621 -+ tristate "MT7621 NAND controller" -+ depends on SOC_MT7621 || COMPILE_TEST -+ depends on HAS_IOMEM -+ help -+ Enables support for NAND controller on MT7621 SoC. -+ This driver uses PIO mode for data transmission instead of DMA mode. -+ - config MTD_NAND_MTK - tristate "MTK NAND controller" - depends on ARCH_MEDIATEK || COMPILE_TEST ---- a/drivers/mtd/nand/raw/Makefile -+++ b/drivers/mtd/nand/raw/Makefile -@@ -51,6 +51,7 @@ obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_n - obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o - obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/ - obj-$(CONFIG_MTD_NAND_QCOM) += qcom_nandc.o -+obj-$(CONFIG_MTD_NAND_MT7621) += mt7621_nand.o - obj-$(CONFIG_MTD_NAND_MTK) += mtk_ecc.o mtk_nand.o - obj-$(CONFIG_MTD_NAND_MXIC) += mxic_nand.o - obj-$(CONFIG_MTD_NAND_TEGRA) += tegra_nand.o ---- /dev/null -+++ b/drivers/mtd/nand/raw/mt7621_nand.c -@@ -0,0 +1,1353 @@ -+// SPDX-License-Identifier: GPL-2.0 -+/* -+ * MediaTek MT7621 NAND Flash Controller driver -+ * -+ * Copyright (C) 2020 MediaTek Inc. All Rights Reserved. -+ * -+ * Author: Weijie Gao -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* NFI core registers */ -+#define NFI_CNFG 0x000 -+#define CNFG_OP_MODE_S 12 -+#define CNFG_OP_MODE_M GENMASK(14, 12) -+#define CNFG_OP_CUSTOM 6 -+#define CNFG_AUTO_FMT_EN BIT(9) -+#define CNFG_HW_ECC_EN BIT(8) -+#define CNFG_BYTE_RW BIT(6) -+#define CNFG_READ_MODE BIT(1) -+ -+#define NFI_PAGEFMT 0x004 -+#define PAGEFMT_FDM_ECC_S 12 -+#define PAGEFMT_FDM_ECC_M GENMASK(15, 12) -+#define PAGEFMT_FDM_S 8 -+#define PAGEFMT_FDM_M GENMASK(11, 8) -+#define PAGEFMT_SPARE_S 4 -+#define PAGEFMT_SPARE_M GENMASK(5, 4) -+#define PAGEFMT_PAGE_S 0 -+#define PAGEFMT_PAGE_M GENMASK(1, 0) -+ -+#define NFI_CON 0x008 -+#define CON_NFI_SEC_S 12 -+#define CON_NFI_SEC_M GENMASK(15, 12) -+#define CON_NFI_BWR BIT(9) -+#define CON_NFI_BRD BIT(8) -+#define CON_NFI_RST BIT(1) -+#define CON_FIFO_FLUSH BIT(0) -+ -+#define NFI_ACCCON 0x00c -+#define ACCCON_POECS_S 28 -+#define ACCCON_POECS_MAX 0x0f -+#define ACCCON_POECS_DEF 3 -+#define ACCCON_PRECS_S 22 -+#define ACCCON_PRECS_MAX 0x3f -+#define ACCCON_PRECS_DEF 3 -+#define ACCCON_C2R_S 16 -+#define ACCCON_C2R_MAX 0x3f -+#define ACCCON_C2R_DEF 7 -+#define ACCCON_W2R_S 12 -+#define ACCCON_W2R_MAX 0x0f -+#define ACCCON_W2R_DEF 7 -+#define ACCCON_WH_S 8 -+#define ACCCON_WH_MAX 0x0f -+#define ACCCON_WH_DEF 15 -+#define ACCCON_WST_S 4 -+#define ACCCON_WST_MAX 0x0f -+#define ACCCON_WST_DEF 15 -+#define ACCCON_WST_MIN 3 -+#define ACCCON_RLT_S 0 -+#define ACCCON_RLT_MAX 0x0f -+#define ACCCON_RLT_DEF 15 -+#define ACCCON_RLT_MIN 3 -+ -+#define NFI_CMD 0x020 -+ -+#define NFI_ADDRNOB 0x030 -+#define ADDR_ROW_NOB_S 4 -+#define ADDR_ROW_NOB_M GENMASK(6, 4) -+#define ADDR_COL_NOB_S 0 -+#define ADDR_COL_NOB_M GENMASK(2, 0) -+ -+#define NFI_COLADDR 0x034 -+#define NFI_ROWADDR 0x038 -+ -+#define NFI_STRDATA 0x040 -+#define STR_DATA BIT(0) -+ -+#define NFI_CNRNB 0x044 -+#define CB2R_TIME_S 4 -+#define CB2R_TIME_M GENMASK(7, 4) -+#define STR_CNRNB BIT(0) -+ -+#define NFI_DATAW 0x050 -+#define NFI_DATAR 0x054 -+ -+#define NFI_PIO_DIRDY 0x058 -+#define PIO_DIRDY BIT(0) -+ -+#define NFI_STA 0x060 -+#define STA_NFI_FSM_S 16 -+#define STA_NFI_FSM_M GENMASK(19, 16) -+#define STA_FSM_CUSTOM_DATA 14 -+#define STA_BUSY BIT(8) -+#define STA_ADDR BIT(1) -+#define STA_CMD BIT(0) -+ -+#define NFI_ADDRCNTR 0x070 -+#define SEC_CNTR_S 12 -+#define SEC_CNTR_M GENMASK(15, 12) -+#define SEC_ADDR_S 0 -+#define SEC_ADDR_M GENMASK(9, 0) -+ -+#define NFI_CSEL 0x090 -+#define CSEL_S 0 -+#define CSEL_M GENMASK(1, 0) -+ -+#define NFI_FDM0L 0x0a0 -+#define NFI_FDML(n) (0x0a0 + ((n) << 3)) -+ -+#define NFI_FDM0M 0x0a4 -+#define NFI_FDMM(n) (0x0a4 + ((n) << 3)) -+ -+#define NFI_MASTER_STA 0x210 -+#define MAS_ADDR GENMASK(11, 9) -+#define MAS_RD GENMASK(8, 6) -+#define MAS_WR GENMASK(5, 3) -+#define MAS_RDDLY GENMASK(2, 0) -+ -+/* ECC engine registers */ -+#define ECC_ENCCON 0x000 -+#define ENC_EN BIT(0) -+ -+#define ECC_ENCCNFG 0x004 -+#define ENC_CNFG_MSG_S 16 -+#define ENC_CNFG_MSG_M GENMASK(28, 16) -+#define ENC_MODE_S 4 -+#define ENC_MODE_M GENMASK(5, 4) -+#define ENC_MODE_NFI 1 -+#define ENC_TNUM_S 0 -+#define ENC_TNUM_M GENMASK(2, 0) -+ -+#define ECC_ENCIDLE 0x00c -+#define ENC_IDLE BIT(0) -+ -+#define ECC_DECCON 0x100 -+#define DEC_EN BIT(0) -+ -+#define ECC_DECCNFG 0x104 -+#define DEC_EMPTY_EN BIT(31) -+#define DEC_CS_S 16 -+#define DEC_CS_M GENMASK(28, 16) -+#define DEC_CON_S 12 -+#define DEC_CON_M GENMASK(13, 12) -+#define DEC_CON_EL 2 -+#define DEC_MODE_S 4 -+#define DEC_MODE_M GENMASK(5, 4) -+#define DEC_MODE_NFI 1 -+#define DEC_TNUM_S 0 -+#define DEC_TNUM_M GENMASK(2, 0) -+ -+#define ECC_DECIDLE 0x10c -+#define DEC_IDLE BIT(1) -+ -+#define ECC_DECENUM 0x114 -+#define ERRNUM_S 2 -+#define ERRNUM_M GENMASK(3, 0) -+ -+#define ECC_DECDONE 0x118 -+#define DEC_DONE7 BIT(7) -+#define DEC_DONE6 BIT(6) -+#define DEC_DONE5 BIT(5) -+#define DEC_DONE4 BIT(4) -+#define DEC_DONE3 BIT(3) -+#define DEC_DONE2 BIT(2) -+#define DEC_DONE1 BIT(1) -+#define DEC_DONE0 BIT(0) -+ -+#define ECC_DECEL(n) (0x11c + (n) * 4) -+#define DEC_EL_ODD_S 16 -+#define DEC_EL_EVEN_S 0 -+#define DEC_EL_M 0x1fff -+#define DEC_EL_BYTE_POS_S 3 -+#define DEC_EL_BIT_POS_M GENMASK(3, 0) -+ -+#define ECC_FDMADDR 0x13c -+ -+/* ENCIDLE and DECIDLE */ -+#define ECC_IDLE BIT(0) -+ -+#define ACCTIMING(tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt) \ -+ ((tpoecs) << ACCCON_POECS_S | (tprecs) << ACCCON_PRECS_S | \ -+ (tc2r) << ACCCON_C2R_S | (tw2r) << ACCCON_W2R_S | \ -+ (twh) << ACCCON_WH_S | (twst) << ACCCON_WST_S | (trlt)) -+ -+#define MASTER_STA_MASK (MAS_ADDR | MAS_RD | MAS_WR | \ -+ MAS_RDDLY) -+#define NFI_RESET_TIMEOUT 1000000 -+#define NFI_CORE_TIMEOUT 500000 -+#define ECC_ENGINE_TIMEOUT 500000 -+ -+#define ECC_SECTOR_SIZE 512 -+#define ECC_PARITY_BITS 13 -+ -+#define NFI_FDM_SIZE 8 -+ -+#define MT7621_NFC_NAME "mt7621-nand" -+ -+struct mt7621_nfc { -+ struct nand_controller controller; -+ struct nand_chip nand; -+ struct clk *nfi_clk; -+ struct device *dev; -+ -+ void __iomem *nfi_regs; -+ void __iomem *ecc_regs; -+ -+ u32 spare_per_sector; -+}; -+ -+static const u16 mt7621_nfi_page_size[] = { SZ_512, SZ_2K, SZ_4K }; -+static const u8 mt7621_nfi_spare_size[] = { 16, 26, 27, 28 }; -+static const u8 mt7621_ecc_strength[] = { 4, 6, 8, 10, 12 }; -+ -+static inline u32 nfi_read32(struct mt7621_nfc *nfc, u32 reg) -+{ -+ return readl(nfc->nfi_regs + reg); -+} -+ -+static inline void nfi_write32(struct mt7621_nfc *nfc, u32 reg, u32 val) -+{ -+ writel(val, nfc->nfi_regs + reg); -+} -+ -+static inline u16 nfi_read16(struct mt7621_nfc *nfc, u32 reg) -+{ -+ return readw(nfc->nfi_regs + reg); -+} -+ -+static inline void nfi_write16(struct mt7621_nfc *nfc, u32 reg, u16 val) -+{ -+ writew(val, nfc->nfi_regs + reg); -+} -+ -+static inline void ecc_write16(struct mt7621_nfc *nfc, u32 reg, u16 val) -+{ -+ writew(val, nfc->ecc_regs + reg); -+} -+ -+static inline u32 ecc_read32(struct mt7621_nfc *nfc, u32 reg) -+{ -+ return readl(nfc->ecc_regs + reg); -+} -+ -+static inline void ecc_write32(struct mt7621_nfc *nfc, u32 reg, u32 val) -+{ -+ return writel(val, nfc->ecc_regs + reg); -+} -+ -+static inline u8 *oob_fdm_ptr(struct nand_chip *nand, int sect) -+{ -+ return nand->oob_poi + sect * NFI_FDM_SIZE; -+} -+ -+static inline u8 *oob_ecc_ptr(struct mt7621_nfc *nfc, int sect) -+{ -+ struct nand_chip *nand = &nfc->nand; -+ -+ return nand->oob_poi + nand->ecc.steps * NFI_FDM_SIZE + -+ sect * (nfc->spare_per_sector - NFI_FDM_SIZE); -+} -+ -+static inline u8 *page_data_ptr(struct nand_chip *nand, const u8 *buf, -+ int sect) -+{ -+ return (u8 *)buf + sect * nand->ecc.size; -+} -+ -+static int mt7621_ecc_wait_idle(struct mt7621_nfc *nfc, u32 reg) -+{ -+ struct device *dev = nfc->dev; -+ u32 val; -+ int ret; -+ -+ ret = readw_poll_timeout_atomic(nfc->ecc_regs + reg, val, -+ val & ECC_IDLE, 10, -+ ECC_ENGINE_TIMEOUT); -+ if (ret) { -+ dev_warn(dev, "ECC engine timed out entering idle mode\n"); -+ return -EIO; -+ } -+ -+ return 0; -+} -+ -+static int mt7621_ecc_decoder_wait_done(struct mt7621_nfc *nfc, u32 sect) -+{ -+ struct device *dev = nfc->dev; -+ u32 val; -+ int ret; -+ -+ ret = readw_poll_timeout_atomic(nfc->ecc_regs + ECC_DECDONE, val, -+ val & (1 << sect), 10, -+ ECC_ENGINE_TIMEOUT); -+ -+ if (ret) { -+ dev_warn(dev, "ECC decoder for sector %d timed out\n", -+ sect); -+ return -ETIMEDOUT; -+ } -+ -+ return 0; -+} -+ -+static void mt7621_ecc_encoder_op(struct mt7621_nfc *nfc, bool enable) -+{ -+ mt7621_ecc_wait_idle(nfc, ECC_ENCIDLE); -+ ecc_write16(nfc, ECC_ENCCON, enable ? ENC_EN : 0); -+} -+ -+static void mt7621_ecc_decoder_op(struct mt7621_nfc *nfc, bool enable) -+{ -+ mt7621_ecc_wait_idle(nfc, ECC_DECIDLE); -+ ecc_write16(nfc, ECC_DECCON, enable ? DEC_EN : 0); -+} -+ -+static int mt7621_ecc_correct_check(struct mt7621_nfc *nfc, u8 *sector_buf, -+ u8 *fdm_buf, u32 sect) -+{ -+ struct nand_chip *nand = &nfc->nand; -+ u32 decnum, num_error_bits, fdm_end_bits; -+ u32 error_locations, error_bit_loc; -+ u32 error_byte_pos, error_bit_pos; -+ int bitflips = 0; -+ u32 i; -+ -+ decnum = ecc_read32(nfc, ECC_DECENUM); -+ num_error_bits = (decnum >> (sect << ERRNUM_S)) & ERRNUM_M; -+ fdm_end_bits = (nand->ecc.size + NFI_FDM_SIZE) << 3; -+ -+ if (!num_error_bits) -+ return 0; -+ -+ if (num_error_bits == ERRNUM_M) -+ return -1; -+ -+ for (i = 0; i < num_error_bits; i++) { -+ error_locations = ecc_read32(nfc, ECC_DECEL(i / 2)); -+ error_bit_loc = (error_locations >> ((i % 2) * DEC_EL_ODD_S)) & -+ DEC_EL_M; -+ error_byte_pos = error_bit_loc >> DEC_EL_BYTE_POS_S; -+ error_bit_pos = error_bit_loc & DEC_EL_BIT_POS_M; -+ -+ if (error_bit_loc < (nand->ecc.size << 3)) { -+ if (sector_buf) { -+ sector_buf[error_byte_pos] ^= -+ (1 << error_bit_pos); -+ } -+ } else if (error_bit_loc < fdm_end_bits) { -+ if (fdm_buf) { -+ fdm_buf[error_byte_pos - nand->ecc.size] ^= -+ (1 << error_bit_pos); -+ } -+ } -+ -+ bitflips++; -+ } -+ -+ return bitflips; -+} -+ -+static int mt7621_nfc_wait_write_completion(struct mt7621_nfc *nfc, -+ struct nand_chip *nand) -+{ -+ struct device *dev = nfc->dev; -+ u16 val; -+ int ret; -+ -+ ret = readw_poll_timeout_atomic(nfc->nfi_regs + NFI_ADDRCNTR, val, -+ ((val & SEC_CNTR_M) >> SEC_CNTR_S) >= nand->ecc.steps, 10, -+ NFI_CORE_TIMEOUT); -+ -+ if (ret) { -+ dev_warn(dev, "NFI core write operation timed out\n"); -+ return -ETIMEDOUT; -+ } -+ -+ return ret; -+} -+ -+static void mt7621_nfc_hw_reset(struct mt7621_nfc *nfc) -+{ -+ u32 val; -+ int ret; -+ -+ /* reset all registers and force the NFI master to terminate */ -+ nfi_write16(nfc, NFI_CON, CON_FIFO_FLUSH | CON_NFI_RST); -+ -+ /* wait for the master to finish the last transaction */ -+ ret = readw_poll_timeout(nfc->nfi_regs + NFI_MASTER_STA, val, -+ !(val & MASTER_STA_MASK), 50, -+ NFI_RESET_TIMEOUT); -+ if (ret) { -+ dev_warn(nfc->dev, "Failed to reset NFI master in %dms\n", -+ NFI_RESET_TIMEOUT); -+ } -+ -+ /* ensure any status register affected by the NFI master is reset */ -+ nfi_write16(nfc, NFI_CON, CON_FIFO_FLUSH | CON_NFI_RST); -+ nfi_write16(nfc, NFI_STRDATA, 0); -+} -+ -+static inline void mt7621_nfc_hw_init(struct mt7621_nfc *nfc) -+{ -+ u32 acccon; -+ -+ /* -+ * CNRNB: nand ready/busy register -+ * ------------------------------- -+ * 7:4: timeout register for polling the NAND busy/ready signal -+ * 0 : poll the status of the busy/ready signal after [7:4]*16 cycles. -+ */ -+ nfi_write16(nfc, NFI_CNRNB, CB2R_TIME_M | STR_CNRNB); -+ -+ mt7621_nfc_hw_reset(nfc); -+ -+ /* Apply default access timing */ -+ acccon = ACCTIMING(ACCCON_POECS_DEF, ACCCON_PRECS_DEF, ACCCON_C2R_DEF, -+ ACCCON_W2R_DEF, ACCCON_WH_DEF, ACCCON_WST_DEF, -+ ACCCON_RLT_DEF); -+ -+ nfi_write32(nfc, NFI_ACCCON, acccon); -+} -+ -+static int mt7621_nfc_send_command(struct mt7621_nfc *nfc, u8 command) -+{ -+ struct device *dev = nfc->dev; -+ u32 val; -+ int ret; -+ -+ nfi_write32(nfc, NFI_CMD, command); -+ -+ ret = readl_poll_timeout_atomic(nfc->nfi_regs + NFI_STA, val, -+ !(val & STA_CMD), 10, -+ NFI_CORE_TIMEOUT); -+ if (ret) { -+ dev_warn(dev, "NFI core timed out entering command mode\n"); -+ return -EIO; -+ } -+ -+ return 0; -+} -+ -+static int mt7621_nfc_send_address_byte(struct mt7621_nfc *nfc, int addr) -+{ -+ struct device *dev = nfc->dev; -+ u32 val; -+ int ret; -+ -+ nfi_write32(nfc, NFI_COLADDR, addr); -+ nfi_write32(nfc, NFI_ROWADDR, 0); -+ nfi_write16(nfc, NFI_ADDRNOB, 1); -+ -+ ret = readl_poll_timeout_atomic(nfc->nfi_regs + NFI_STA, val, -+ !(val & STA_ADDR), 10, -+ NFI_CORE_TIMEOUT); -+ if (ret) { -+ dev_warn(dev, "NFI core timed out entering address mode\n"); -+ return -EIO; -+ } -+ -+ return 0; -+} -+ -+static int mt7621_nfc_send_address(struct mt7621_nfc *nfc, const u8 *addr, -+ unsigned int naddrs) -+{ -+ int ret; -+ -+ while (naddrs) { -+ ret = mt7621_nfc_send_address_byte(nfc, *addr); -+ if (ret) -+ return ret; -+ -+ addr++; -+ naddrs--; -+ } -+ -+ return 0; -+} -+ -+static void mt7621_nfc_wait_pio_ready(struct mt7621_nfc *nfc) -+{ -+ struct device *dev = nfc->dev; -+ int ret; -+ u16 val; -+ -+ ret = readw_poll_timeout_atomic(nfc->nfi_regs + NFI_PIO_DIRDY, val, -+ val & PIO_DIRDY, 10, -+ NFI_CORE_TIMEOUT); -+ if (ret < 0) -+ dev_err(dev, "NFI core PIO mode not ready\n"); -+} -+ -+static u32 mt7621_nfc_pio_read(struct mt7621_nfc *nfc, bool br) -+{ -+ u32 reg; -+ -+ /* after each byte read, the NFI_STA reg is reset by the hardware */ -+ reg = (nfi_read32(nfc, NFI_STA) & STA_NFI_FSM_M) >> STA_NFI_FSM_S; -+ if (reg != STA_FSM_CUSTOM_DATA) { -+ reg = nfi_read16(nfc, NFI_CNFG); -+ reg |= CNFG_READ_MODE | CNFG_BYTE_RW; -+ if (!br) -+ reg &= ~CNFG_BYTE_RW; -+ nfi_write16(nfc, NFI_CNFG, reg); -+ -+ /* -+ * set to max sector to allow the HW to continue reading over -+ * unaligned accesses -+ */ -+ nfi_write16(nfc, NFI_CON, CON_NFI_SEC_M | CON_NFI_BRD); -+ -+ /* trigger to fetch data */ -+ nfi_write16(nfc, NFI_STRDATA, STR_DATA); -+ } -+ -+ mt7621_nfc_wait_pio_ready(nfc); -+ -+ return nfi_read32(nfc, NFI_DATAR); -+} -+ -+static void mt7621_nfc_read_data(struct mt7621_nfc *nfc, u8 *buf, u32 len) -+{ -+ while (((uintptr_t)buf & 3) && len) { -+ *buf = mt7621_nfc_pio_read(nfc, true); -+ buf++; -+ len--; -+ } -+ -+ while (len >= 4) { -+ *(u32 *)buf = mt7621_nfc_pio_read(nfc, false); -+ buf += 4; -+ len -= 4; -+ } -+ -+ while (len) { -+ *buf = mt7621_nfc_pio_read(nfc, true); -+ buf++; -+ len--; -+ } -+} -+ -+static void mt7621_nfc_read_data_discard(struct mt7621_nfc *nfc, u32 len) -+{ -+ while (len >= 4) { -+ mt7621_nfc_pio_read(nfc, false); -+ len -= 4; -+ } -+ -+ while (len) { -+ mt7621_nfc_pio_read(nfc, true); -+ len--; -+ } -+} -+ -+static void mt7621_nfc_pio_write(struct mt7621_nfc *nfc, u32 val, bool bw) -+{ -+ u32 reg; -+ -+ reg = (nfi_read32(nfc, NFI_STA) & STA_NFI_FSM_M) >> STA_NFI_FSM_S; -+ if (reg != STA_FSM_CUSTOM_DATA) { -+ reg = nfi_read16(nfc, NFI_CNFG); -+ reg &= ~(CNFG_READ_MODE | CNFG_BYTE_RW); -+ if (bw) -+ reg |= CNFG_BYTE_RW; -+ nfi_write16(nfc, NFI_CNFG, reg); -+ -+ nfi_write16(nfc, NFI_CON, CON_NFI_SEC_M | CON_NFI_BWR); -+ nfi_write16(nfc, NFI_STRDATA, STR_DATA); -+ } -+ -+ mt7621_nfc_wait_pio_ready(nfc); -+ nfi_write32(nfc, NFI_DATAW, val); -+} -+ -+static void mt7621_nfc_write_data(struct mt7621_nfc *nfc, const u8 *buf, -+ u32 len) -+{ -+ while (((uintptr_t)buf & 3) && len) { -+ mt7621_nfc_pio_write(nfc, *buf, true); -+ buf++; -+ len--; -+ } -+ -+ while (len >= 4) { -+ mt7621_nfc_pio_write(nfc, *(const u32 *)buf, false); -+ buf += 4; -+ len -= 4; -+ } -+ -+ while (len) { -+ mt7621_nfc_pio_write(nfc, *buf, true); -+ buf++; -+ len--; -+ } -+} -+ -+static void mt7621_nfc_write_data_empty(struct mt7621_nfc *nfc, u32 len) -+{ -+ while (len >= 4) { -+ mt7621_nfc_pio_write(nfc, 0xffffffff, false); -+ len -= 4; -+ } -+ -+ while (len) { -+ mt7621_nfc_pio_write(nfc, 0xff, true); -+ len--; -+ } -+} -+ -+static int mt7621_nfc_dev_ready(struct mt7621_nfc *nfc, -+ unsigned int timeout_ms) -+{ -+ u32 val; -+ -+ return readl_poll_timeout_atomic(nfc->nfi_regs + NFI_STA, val, -+ !(val & STA_BUSY), 10, -+ timeout_ms * 1000); -+} -+ -+static int mt7621_nfc_exec_instr(struct nand_chip *nand, -+ const struct nand_op_instr *instr) -+{ -+ struct mt7621_nfc *nfc = nand_get_controller_data(nand); -+ -+ switch (instr->type) { -+ case NAND_OP_CMD_INSTR: -+ mt7621_nfc_hw_reset(nfc); -+ nfi_write16(nfc, NFI_CNFG, CNFG_OP_CUSTOM << CNFG_OP_MODE_S); -+ return mt7621_nfc_send_command(nfc, instr->ctx.cmd.opcode); -+ case NAND_OP_ADDR_INSTR: -+ return mt7621_nfc_send_address(nfc, instr->ctx.addr.addrs, -+ instr->ctx.addr.naddrs); -+ case NAND_OP_DATA_IN_INSTR: -+ mt7621_nfc_read_data(nfc, instr->ctx.data.buf.in, -+ instr->ctx.data.len); -+ return 0; -+ case NAND_OP_DATA_OUT_INSTR: -+ mt7621_nfc_write_data(nfc, instr->ctx.data.buf.out, -+ instr->ctx.data.len); -+ return 0; -+ case NAND_OP_WAITRDY_INSTR: -+ return mt7621_nfc_dev_ready(nfc, -+ instr->ctx.waitrdy.timeout_ms); -+ default: -+ WARN_ONCE(1, "unsupported NAND instruction type: %d\n", -+ instr->type); -+ -+ return -EINVAL; -+ } -+} -+ -+static int mt7621_nfc_exec_op(struct nand_chip *nand, -+ const struct nand_operation *op, bool check_only) -+{ -+ struct mt7621_nfc *nfc = nand_get_controller_data(nand); -+ int i, ret; -+ -+ if (check_only) -+ return 0; -+ -+ /* Only CS0 available */ -+ nfi_write16(nfc, NFI_CSEL, 0); -+ -+ for (i = 0; i < op->ninstrs; i++) { -+ ret = mt7621_nfc_exec_instr(nand, &op->instrs[i]); -+ if (ret) -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static int mt7621_nfc_setup_interface(struct nand_chip *nand, int csline, -+ const struct nand_interface_config *conf) -+{ -+ struct mt7621_nfc *nfc = nand_get_controller_data(nand); -+ const struct nand_sdr_timings *timings; -+ u32 acccon, temp, rate, tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt; -+ -+ if (!nfc->nfi_clk) -+ return -ENOTSUPP; -+ -+ timings = nand_get_sdr_timings(conf); -+ if (IS_ERR(timings)) -+ return -ENOTSUPP; -+ -+ rate = clk_get_rate(nfc->nfi_clk); -+ -+ /* turn clock rate into KHZ */ -+ rate /= 1000; -+ -+ tpoecs = max(timings->tALH_min, timings->tCLH_min) / 1000; -+ tpoecs = DIV_ROUND_UP(tpoecs * rate, 1000000); -+ tpoecs = min_t(u32, tpoecs, ACCCON_POECS_MAX); -+ -+ tprecs = max(timings->tCLS_min, timings->tALS_min) / 1000; -+ tprecs = DIV_ROUND_UP(tprecs * rate, 1000000); -+ tprecs = min_t(u32, tprecs, ACCCON_PRECS_MAX); -+ -+ /* sdr interface has no tCR which means CE# low to RE# low */ -+ tc2r = 0; -+ -+ tw2r = timings->tWHR_min / 1000; -+ tw2r = DIV_ROUND_UP(tw2r * rate, 1000000); -+ tw2r = DIV_ROUND_UP(tw2r - 1, 2); -+ tw2r = min_t(u32, tw2r, ACCCON_W2R_MAX); -+ -+ twh = max(timings->tREH_min, timings->tWH_min) / 1000; -+ twh = DIV_ROUND_UP(twh * rate, 1000000) - 1; -+ twh = min_t(u32, twh, ACCCON_WH_MAX); -+ -+ /* Calculate real WE#/RE# hold time in nanosecond */ -+ temp = (twh + 1) * 1000000 / rate; -+ /* nanosecond to picosecond */ -+ temp *= 1000; -+ -+ /* -+ * WE# low level time should be expaned to meet WE# pulse time -+ * and WE# cycle time at the same time. -+ */ -+ if (temp < timings->tWC_min) -+ twst = timings->tWC_min - temp; -+ else -+ twst = 0; -+ twst = max(timings->tWP_min, twst) / 1000; -+ twst = DIV_ROUND_UP(twst * rate, 1000000) - 1; -+ twst = min_t(u32, twst, ACCCON_WST_MAX); -+ -+ /* -+ * RE# low level time should be expaned to meet RE# pulse time -+ * and RE# cycle time at the same time. -+ */ -+ if (temp < timings->tRC_min) -+ trlt = timings->tRC_min - temp; -+ else -+ trlt = 0; -+ trlt = max(trlt, timings->tRP_min) / 1000; -+ trlt = DIV_ROUND_UP(trlt * rate, 1000000) - 1; -+ trlt = min_t(u32, trlt, ACCCON_RLT_MAX); -+ -+ if (csline == NAND_DATA_IFACE_CHECK_ONLY) { -+ if (twst < ACCCON_WST_MIN || trlt < ACCCON_RLT_MIN) -+ return -ENOTSUPP; -+ } -+ -+ acccon = ACCTIMING(tpoecs, tprecs, tc2r, tw2r, twh, twst, trlt); -+ -+ dev_info(nfc->dev, "Using programmed access timing: %08x\n", acccon); -+ -+ nfi_write32(nfc, NFI_ACCCON, acccon); -+ -+ return 0; -+} -+ -+static int mt7621_nfc_calc_ecc_strength(struct mt7621_nfc *nfc, -+ u32 avail_ecc_bytes) -+{ -+ struct nand_chip *nand = &nfc->nand; -+ struct mtd_info *mtd = nand_to_mtd(nand); -+ u32 strength; -+ int i; -+ -+ strength = avail_ecc_bytes * 8 / ECC_PARITY_BITS; -+ -+ /* Find the closest supported ecc strength */ -+ for (i = ARRAY_SIZE(mt7621_ecc_strength) - 1; i >= 0; i--) { -+ if (mt7621_ecc_strength[i] <= strength) -+ break; -+ } -+ -+ if (unlikely(i < 0)) { -+ dev_err(nfc->dev, "OOB size (%u) is not supported\n", -+ mtd->oobsize); -+ return -EINVAL; -+ } -+ -+ nand->ecc.strength = mt7621_ecc_strength[i]; -+ nand->ecc.bytes = -+ DIV_ROUND_UP(nand->ecc.strength * ECC_PARITY_BITS, 8); -+ -+ dev_info(nfc->dev, "ECC strength adjusted to %u bits\n", -+ nand->ecc.strength); -+ -+ return i; -+} -+ -+static int mt7621_nfc_set_spare_per_sector(struct mt7621_nfc *nfc) -+{ -+ struct nand_chip *nand = &nfc->nand; -+ struct mtd_info *mtd = nand_to_mtd(nand); -+ u32 size; -+ int i; -+ -+ size = nand->ecc.bytes + NFI_FDM_SIZE; -+ -+ /* Find the closest supported spare size */ -+ for (i = 0; i < ARRAY_SIZE(mt7621_nfi_spare_size); i++) { -+ if (mt7621_nfi_spare_size[i] >= size) -+ break; -+ } -+ -+ if (unlikely(i >= ARRAY_SIZE(mt7621_nfi_spare_size))) { -+ dev_err(nfc->dev, "OOB size (%u) is not supported\n", -+ mtd->oobsize); -+ return -EINVAL; -+ } -+ -+ nfc->spare_per_sector = mt7621_nfi_spare_size[i]; -+ -+ return i; -+} -+ -+static int mt7621_nfc_ecc_init(struct mt7621_nfc *nfc) -+{ -+ struct nand_chip *nand = &nfc->nand; -+ struct mtd_info *mtd = nand_to_mtd(nand); -+ u32 spare_per_sector, encode_block_size, decode_block_size; -+ u32 ecc_enccfg, ecc_deccfg; -+ int ecc_cap; -+ -+ /* Only hardware ECC mode is supported */ -+ if (nand->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST) { -+ dev_err(nfc->dev, "Only hardware ECC mode is supported\n"); -+ return -EINVAL; -+ } -+ -+ nand->ecc.size = ECC_SECTOR_SIZE; -+ nand->ecc.steps = mtd->writesize / nand->ecc.size; -+ -+ spare_per_sector = mtd->oobsize / nand->ecc.steps; -+ -+ ecc_cap = mt7621_nfc_calc_ecc_strength(nfc, -+ spare_per_sector - NFI_FDM_SIZE); -+ if (ecc_cap < 0) -+ return ecc_cap; -+ -+ /* Sector + FDM */ -+ encode_block_size = (nand->ecc.size + NFI_FDM_SIZE) * 8; -+ ecc_enccfg = ecc_cap | (ENC_MODE_NFI << ENC_MODE_S) | -+ (encode_block_size << ENC_CNFG_MSG_S); -+ -+ /* Sector + FDM + ECC parity bits */ -+ decode_block_size = ((nand->ecc.size + NFI_FDM_SIZE) * 8) + -+ nand->ecc.strength * ECC_PARITY_BITS; -+ ecc_deccfg = ecc_cap | (DEC_MODE_NFI << DEC_MODE_S) | -+ (decode_block_size << DEC_CS_S) | -+ (DEC_CON_EL << DEC_CON_S) | DEC_EMPTY_EN; -+ -+ mt7621_ecc_encoder_op(nfc, false); -+ ecc_write32(nfc, ECC_ENCCNFG, ecc_enccfg); -+ -+ mt7621_ecc_decoder_op(nfc, false); -+ ecc_write32(nfc, ECC_DECCNFG, ecc_deccfg); -+ -+ return 0; -+} -+ -+static int mt7621_nfc_set_page_format(struct mt7621_nfc *nfc) -+{ -+ struct nand_chip *nand = &nfc->nand; -+ struct mtd_info *mtd = nand_to_mtd(nand); -+ int i, spare_size; -+ u32 pagefmt; -+ -+ spare_size = mt7621_nfc_set_spare_per_sector(nfc); -+ if (spare_size < 0) -+ return spare_size; -+ -+ for (i = 0; i < ARRAY_SIZE(mt7621_nfi_page_size); i++) { -+ if (mt7621_nfi_page_size[i] == mtd->writesize) -+ break; -+ } -+ -+ if (unlikely(i >= ARRAY_SIZE(mt7621_nfi_page_size))) { -+ dev_err(nfc->dev, "Page size (%u) is not supported\n", -+ mtd->writesize); -+ return -EINVAL; -+ } -+ -+ pagefmt = i | (spare_size << PAGEFMT_SPARE_S) | -+ (NFI_FDM_SIZE << PAGEFMT_FDM_S) | -+ (NFI_FDM_SIZE << PAGEFMT_FDM_ECC_S); -+ -+ nfi_write16(nfc, NFI_PAGEFMT, pagefmt); -+ -+ return 0; -+} -+ -+static int mt7621_nfc_attach_chip(struct nand_chip *nand) -+{ -+ struct mt7621_nfc *nfc = nand_get_controller_data(nand); -+ int ret; -+ -+ if (nand->options & NAND_BUSWIDTH_16) { -+ dev_err(nfc->dev, "16-bit buswidth is not supported"); -+ return -EINVAL; -+ } -+ -+ ret = mt7621_nfc_ecc_init(nfc); -+ if (ret) -+ return ret; -+ -+ return mt7621_nfc_set_page_format(nfc); -+} -+ -+static const struct nand_controller_ops mt7621_nfc_controller_ops = { -+ .attach_chip = mt7621_nfc_attach_chip, -+ .exec_op = mt7621_nfc_exec_op, -+ .setup_interface = mt7621_nfc_setup_interface, -+}; -+ -+static int mt7621_nfc_ooblayout_free(struct mtd_info *mtd, int section, -+ struct mtd_oob_region *oob_region) -+{ -+ struct nand_chip *nand = mtd_to_nand(mtd); -+ -+ if (section >= nand->ecc.steps) -+ return -ERANGE; -+ -+ oob_region->length = NFI_FDM_SIZE - 1; -+ oob_region->offset = section * NFI_FDM_SIZE + 1; -+ -+ return 0; -+} -+ -+static int mt7621_nfc_ooblayout_ecc(struct mtd_info *mtd, int section, -+ struct mtd_oob_region *oob_region) -+{ -+ struct nand_chip *nand = mtd_to_nand(mtd); -+ -+ if (section) -+ return -ERANGE; -+ -+ oob_region->offset = NFI_FDM_SIZE * nand->ecc.steps; -+ oob_region->length = mtd->oobsize - oob_region->offset; -+ -+ return 0; -+} -+ -+static const struct mtd_ooblayout_ops mt7621_nfc_ooblayout_ops = { -+ .free = mt7621_nfc_ooblayout_free, -+ .ecc = mt7621_nfc_ooblayout_ecc, -+}; -+ -+static void mt7621_nfc_write_fdm(struct mt7621_nfc *nfc) -+{ -+ struct nand_chip *nand = &nfc->nand; -+ u32 vall, valm; -+ u8 *oobptr; -+ int i, j; -+ -+ for (i = 0; i < nand->ecc.steps; i++) { -+ vall = 0; -+ valm = 0; -+ oobptr = oob_fdm_ptr(nand, i); -+ -+ for (j = 0; j < 4; j++) -+ vall |= (u32)oobptr[j] << (j * 8); -+ -+ for (j = 0; j < 4; j++) -+ valm |= (u32)oobptr[j + 4] << ((j - 4) * 8); -+ -+ nfi_write32(nfc, NFI_FDML(i), vall); -+ nfi_write32(nfc, NFI_FDMM(i), valm); -+ } -+} -+ -+static void mt7621_nfc_read_sector_fdm(struct mt7621_nfc *nfc, u32 sect) -+{ -+ struct nand_chip *nand = &nfc->nand; -+ u32 vall, valm; -+ u8 *oobptr; -+ int i; -+ -+ vall = nfi_read32(nfc, NFI_FDML(sect)); -+ valm = nfi_read32(nfc, NFI_FDMM(sect)); -+ oobptr = oob_fdm_ptr(nand, sect); -+ -+ for (i = 0; i < 4; i++) -+ oobptr[i] = (vall >> (i * 8)) & 0xff; -+ -+ for (i = 0; i < 4; i++) -+ oobptr[i + 4] = (valm >> (i * 8)) & 0xff; -+} -+ -+static int mt7621_nfc_read_page_hwecc(struct nand_chip *nand, uint8_t *buf, -+ int oob_required, int page) -+{ -+ struct mt7621_nfc *nfc = nand_get_controller_data(nand); -+ struct mtd_info *mtd = nand_to_mtd(nand); -+ int bitflips = 0; -+ int rc, i; -+ -+ nand_read_page_op(nand, page, 0, NULL, 0); -+ -+ nfi_write16(nfc, NFI_CNFG, (CNFG_OP_CUSTOM << CNFG_OP_MODE_S) | -+ CNFG_READ_MODE | CNFG_AUTO_FMT_EN | CNFG_HW_ECC_EN); -+ -+ mt7621_ecc_decoder_op(nfc, true); -+ -+ nfi_write16(nfc, NFI_CON, -+ CON_NFI_BRD | (nand->ecc.steps << CON_NFI_SEC_S)); -+ -+ for (i = 0; i < nand->ecc.steps; i++) { -+ if (buf) -+ mt7621_nfc_read_data(nfc, page_data_ptr(nand, buf, i), -+ nand->ecc.size); -+ else -+ mt7621_nfc_read_data_discard(nfc, nand->ecc.size); -+ -+ rc = mt7621_ecc_decoder_wait_done(nfc, i); -+ -+ mt7621_nfc_read_sector_fdm(nfc, i); -+ -+ if (rc < 0) { -+ bitflips = -EIO; -+ continue; -+ } -+ -+ rc = mt7621_ecc_correct_check(nfc, -+ buf ? page_data_ptr(nand, buf, i) : NULL, -+ oob_fdm_ptr(nand, i), i); -+ -+ if (rc < 0) { -+ dev_warn(nfc->dev, -+ "Uncorrectable ECC error at page %d.%d\n", -+ page, i); -+ bitflips = -EBADMSG; -+ mtd->ecc_stats.failed++; -+ } else if (bitflips >= 0) { -+ bitflips += rc; -+ mtd->ecc_stats.corrected += rc; -+ } -+ } -+ -+ mt7621_ecc_decoder_op(nfc, false); -+ -+ nfi_write16(nfc, NFI_CON, 0); -+ -+ return bitflips; -+} -+ -+static int mt7621_nfc_read_page_raw(struct nand_chip *nand, uint8_t *buf, -+ int oob_required, int page) -+{ -+ struct mt7621_nfc *nfc = nand_get_controller_data(nand); -+ int i; -+ -+ nand_read_page_op(nand, page, 0, NULL, 0); -+ -+ nfi_write16(nfc, NFI_CNFG, (CNFG_OP_CUSTOM << CNFG_OP_MODE_S) | -+ CNFG_READ_MODE); -+ -+ nfi_write16(nfc, NFI_CON, -+ CON_NFI_BRD | (nand->ecc.steps << CON_NFI_SEC_S)); -+ -+ for (i = 0; i < nand->ecc.steps; i++) { -+ /* Read data */ -+ if (buf) -+ mt7621_nfc_read_data(nfc, page_data_ptr(nand, buf, i), -+ nand->ecc.size); -+ else -+ mt7621_nfc_read_data_discard(nfc, nand->ecc.size); -+ -+ /* Read FDM */ -+ mt7621_nfc_read_data(nfc, oob_fdm_ptr(nand, i), NFI_FDM_SIZE); -+ -+ /* Read ECC parity data */ -+ mt7621_nfc_read_data(nfc, oob_ecc_ptr(nfc, i), -+ nfc->spare_per_sector - NFI_FDM_SIZE); -+ } -+ -+ nfi_write16(nfc, NFI_CON, 0); -+ -+ return 0; -+} -+ -+static int mt7621_nfc_read_oob_hwecc(struct nand_chip *nand, int page) -+{ -+ return mt7621_nfc_read_page_hwecc(nand, NULL, 1, page); -+} -+ -+static int mt7621_nfc_read_oob_raw(struct nand_chip *nand, int page) -+{ -+ return mt7621_nfc_read_page_raw(nand, NULL, 1, page); -+} -+ -+static int mt7621_nfc_check_empty_page(struct nand_chip *nand, const u8 *buf) -+{ -+ struct mtd_info *mtd = nand_to_mtd(nand); -+ uint32_t i, j; -+ u8 *oobptr; -+ -+ if (buf) { -+ for (i = 0; i < mtd->writesize; i++) -+ if (buf[i] != 0xff) -+ return 0; -+ } -+ -+ for (i = 0; i < nand->ecc.steps; i++) { -+ oobptr = oob_fdm_ptr(nand, i); -+ for (j = 0; j < NFI_FDM_SIZE; j++) -+ if (oobptr[j] != 0xff) -+ return 0; -+ } -+ -+ return 1; -+} -+ -+static int mt7621_nfc_write_page_hwecc(struct nand_chip *nand, -+ const uint8_t *buf, int oob_required, -+ int page) -+{ -+ struct mt7621_nfc *nfc = nand_get_controller_data(nand); -+ struct mtd_info *mtd = nand_to_mtd(nand); -+ -+ if (mt7621_nfc_check_empty_page(nand, buf)) { -+ /* -+ * MT7621 ECC engine always generates parity code for input -+ * pages, even for empty pages. Doing so will write back ECC -+ * parity code to the oob region, which means such pages will -+ * no longer be empty pages. -+ * -+ * To avoid this, stop write operation if current page is an -+ * empty page. -+ */ -+ return 0; -+ } -+ -+ nand_prog_page_begin_op(nand, page, 0, NULL, 0); -+ -+ nfi_write16(nfc, NFI_CNFG, (CNFG_OP_CUSTOM << CNFG_OP_MODE_S) | -+ CNFG_AUTO_FMT_EN | CNFG_HW_ECC_EN); -+ -+ mt7621_ecc_encoder_op(nfc, true); -+ -+ mt7621_nfc_write_fdm(nfc); -+ -+ nfi_write16(nfc, NFI_CON, -+ CON_NFI_BWR | (nand->ecc.steps << CON_NFI_SEC_S)); -+ -+ if (buf) -+ mt7621_nfc_write_data(nfc, buf, mtd->writesize); -+ else -+ mt7621_nfc_write_data_empty(nfc, mtd->writesize); -+ -+ mt7621_nfc_wait_write_completion(nfc, nand); -+ -+ mt7621_ecc_encoder_op(nfc, false); -+ -+ nfi_write16(nfc, NFI_CON, 0); -+ -+ return nand_prog_page_end_op(nand); -+} -+ -+static int mt7621_nfc_write_page_raw(struct nand_chip *nand, -+ const uint8_t *buf, int oob_required, -+ int page) -+{ -+ struct mt7621_nfc *nfc = nand_get_controller_data(nand); -+ int i; -+ -+ nand_prog_page_begin_op(nand, page, 0, NULL, 0); -+ -+ nfi_write16(nfc, NFI_CNFG, (CNFG_OP_CUSTOM << CNFG_OP_MODE_S)); -+ -+ nfi_write16(nfc, NFI_CON, -+ CON_NFI_BWR | (nand->ecc.steps << CON_NFI_SEC_S)); -+ -+ for (i = 0; i < nand->ecc.steps; i++) { -+ /* Write data */ -+ if (buf) -+ mt7621_nfc_write_data(nfc, page_data_ptr(nand, buf, i), -+ nand->ecc.size); -+ else -+ mt7621_nfc_write_data_empty(nfc, nand->ecc.size); -+ -+ /* Write FDM */ -+ mt7621_nfc_write_data(nfc, oob_fdm_ptr(nand, i), -+ NFI_FDM_SIZE); -+ -+ /* Write dummy ECC parity data */ -+ mt7621_nfc_write_data_empty(nfc, nfc->spare_per_sector - -+ NFI_FDM_SIZE); -+ } -+ -+ mt7621_nfc_wait_write_completion(nfc, nand); -+ -+ nfi_write16(nfc, NFI_CON, 0); -+ -+ return nand_prog_page_end_op(nand); -+} -+ -+static int mt7621_nfc_write_oob_hwecc(struct nand_chip *nand, int page) -+{ -+ return mt7621_nfc_write_page_hwecc(nand, NULL, 1, page); -+} -+ -+static int mt7621_nfc_write_oob_raw(struct nand_chip *nand, int page) -+{ -+ return mt7621_nfc_write_page_raw(nand, NULL, 1, page); -+} -+ -+static int mt7621_nfc_init_chip(struct mt7621_nfc *nfc) -+{ -+ struct nand_chip *nand = &nfc->nand; -+ struct mtd_info *mtd; -+ int ret; -+ -+ nand->controller = &nfc->controller; -+ nand_set_controller_data(nand, (void *)nfc); -+ nand_set_flash_node(nand, nfc->dev->of_node); -+ -+ nand->options |= NAND_USES_DMA | NAND_NO_SUBPAGE_WRITE; -+ if (!nfc->nfi_clk) -+ nand->options |= NAND_KEEP_TIMINGS; -+ -+ nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST; -+ nand->ecc.read_page = mt7621_nfc_read_page_hwecc; -+ nand->ecc.read_page_raw = mt7621_nfc_read_page_raw; -+ nand->ecc.write_page = mt7621_nfc_write_page_hwecc; -+ nand->ecc.write_page_raw = mt7621_nfc_write_page_raw; -+ nand->ecc.read_oob = mt7621_nfc_read_oob_hwecc; -+ nand->ecc.read_oob_raw = mt7621_nfc_read_oob_raw; -+ nand->ecc.write_oob = mt7621_nfc_write_oob_hwecc; -+ nand->ecc.write_oob_raw = mt7621_nfc_write_oob_raw; -+ -+ mtd = nand_to_mtd(nand); -+ mtd->owner = THIS_MODULE; -+ mtd->dev.parent = nfc->dev; -+ mtd->name = MT7621_NFC_NAME; -+ mtd_set_ooblayout(mtd, &mt7621_nfc_ooblayout_ops); -+ -+ mt7621_nfc_hw_init(nfc); -+ -+ ret = nand_scan(nand, 1); -+ if (ret) -+ return ret; -+ -+ ret = mtd_device_register(mtd, NULL, 0); -+ if (ret) { -+ dev_err(nfc->dev, "Failed to register MTD: %d\n", ret); -+ nand_cleanup(nand); -+ return ret; -+ } -+ -+ return 0; -+} -+ -+static int mt7621_nfc_probe(struct platform_device *pdev) -+{ -+ struct device *dev = &pdev->dev; -+ struct mt7621_nfc *nfc; -+ struct resource *res; -+ int ret; -+ -+ nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL); -+ if (!nfc) -+ return -ENOMEM; -+ -+ nand_controller_init(&nfc->controller); -+ nfc->controller.ops = &mt7621_nfc_controller_ops; -+ nfc->dev = dev; -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nfi"); -+ nfc->nfi_regs = devm_ioremap_resource(dev, res); -+ if (IS_ERR(nfc->nfi_regs)) { -+ ret = PTR_ERR(nfc->nfi_regs); -+ return ret; -+ } -+ -+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ecc"); -+ nfc->ecc_regs = devm_ioremap_resource(dev, res); -+ if (IS_ERR(nfc->ecc_regs)) { -+ ret = PTR_ERR(nfc->ecc_regs); -+ return ret; -+ } -+ -+ nfc->nfi_clk = devm_clk_get(dev, "nfi_clk"); -+ if (IS_ERR(nfc->nfi_clk)) { -+ dev_warn(dev, "nfi clk not provided\n"); -+ nfc->nfi_clk = NULL; -+ } else { -+ ret = clk_prepare_enable(nfc->nfi_clk); -+ if (ret) { -+ dev_err(dev, "Failed to enable nfi core clock\n"); -+ return ret; -+ } -+ } -+ -+ platform_set_drvdata(pdev, nfc); -+ -+ ret = mt7621_nfc_init_chip(nfc); -+ if (ret) { -+ dev_err(dev, "Failed to initialize nand chip\n"); -+ goto clk_disable; -+ } -+ -+ return 0; -+ -+clk_disable: -+ clk_disable_unprepare(nfc->nfi_clk); -+ -+ return ret; -+} -+ -+static int mt7621_nfc_remove(struct platform_device *pdev) -+{ -+ struct mt7621_nfc *nfc = platform_get_drvdata(pdev); -+ struct nand_chip *nand = &nfc->nand; -+ struct mtd_info *mtd = nand_to_mtd(nand); -+ -+ mtd_device_unregister(mtd); -+ nand_cleanup(nand); -+ clk_disable_unprepare(nfc->nfi_clk); -+ -+ return 0; -+} -+ -+static const struct of_device_id mt7621_nfc_id_table[] = { -+ { .compatible = "mediatek,mt7621-nfc" }, -+ { }, -+}; -+MODULE_DEVICE_TABLE(of, match); -+ -+static struct platform_driver mt7621_nfc_driver = { -+ .probe = mt7621_nfc_probe, -+ .remove = mt7621_nfc_remove, -+ .driver = { -+ .name = MT7621_NFC_NAME, -+ .owner = THIS_MODULE, -+ .of_match_table = mt7621_nfc_id_table, -+ }, -+}; -+module_platform_driver(mt7621_nfc_driver); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("Weijie Gao "); -+MODULE_DESCRIPTION("MediaTek MT7621 NAND Flash Controller driver"); diff --git a/target/linux/ramips/patches-5.10/411-dt-bindings-add-documentation-for-mt7621-nand-driver.patch b/target/linux/ramips/patches-5.10/411-dt-bindings-add-documentation-for-mt7621-nand-driver.patch deleted file mode 100644 index 3d122c10c043..000000000000 --- a/target/linux/ramips/patches-5.10/411-dt-bindings-add-documentation-for-mt7621-nand-driver.patch +++ /dev/null @@ -1,85 +0,0 @@ -From 3d5f4da8296b23eb3abf8b13122b0d06a215e79c Mon Sep 17 00:00:00 2001 -From: Weijie Gao -Date: Wed, 1 Apr 2020 02:07:59 +0800 -Subject: [PATCH 2/2] dt-bindings: add documentation for mt7621-nand driver - -This patch adds documentation for MediaTek MT7621 NAND flash controller -driver. - -Signed-off-by: Weijie Gao ---- - .../bindings/mtd/mediatek,mt7621-nfc.yaml | 68 ++++++++++++++++++++++ - 1 file changed, 68 insertions(+) - create mode 100644 Documentation/devicetree/bindings/mtd/mediatek,mt7621-nfc.yaml - ---- /dev/null -+++ b/Documentation/devicetree/bindings/mtd/mediatek,mt7621-nfc.yaml -@@ -0,0 +1,68 @@ -+# SPDX-License-Identifier: GPL-2.0 -+%YAML 1.2 -+--- -+$id: http://devicetree.org/schemas/mtd/mediatek,mt7621-nfc.yaml# -+$schema: http://devicetree.org/meta-schemas/core.yaml# -+ -+title: MediaTek MT7621 SoC NAND Flash Controller (NFC) DT binding -+ -+maintainers: -+ - Weijie Gao -+ -+description: | -+ This driver uses a single node to describe both NAND Flash controller -+ interface (NFI) and ECC engine for MT7621 SoC. -+ MT7621 supports only one chip select. -+ -+properties: -+ "#address-cells": false -+ "#size-cells": false -+ -+ compatible: -+ enum: -+ - mediatek,mt7621-nfc -+ -+ reg: -+ items: -+ - description: Register base of NFI core -+ - description: Register base of ECC engine -+ -+ reg-names: -+ items: -+ - const: nfi -+ - const: ecc -+ -+ clocks: -+ items: -+ - description: Source clock for NFI core, fixed 125MHz -+ -+ clock-names: -+ items: -+ - const: nfi_clk -+ -+required: -+ - compatible -+ - reg -+ - reg-names -+ - clocks -+ - clock-names -+ -+examples: -+ - | -+ nficlock: nficlock { -+ #clock-cells = <0>; -+ compatible = "fixed-clock"; -+ -+ clock-frequency = <125000000>; -+ }; -+ -+ nand@1e003000 { -+ compatible = "mediatek,mt7621-nfc"; -+ -+ reg = <0x1e003000 0x800 -+ 0x1e003800 0x800>; -+ reg-names = "nfi", "ecc"; -+ -+ clocks = <&nficlock>; -+ clock-names = "nfi_clk"; -+ }; diff --git a/target/linux/ramips/patches-5.10/420-spi-nor-add-gd25q512.patch b/target/linux/ramips/patches-5.10/420-spi-nor-add-gd25q512.patch deleted file mode 100644 index 6f41546964f3..000000000000 --- a/target/linux/ramips/patches-5.10/420-spi-nor-add-gd25q512.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/drivers/mtd/spi-nor/gigadevice.c -+++ b/drivers/mtd/spi-nor/gigadevice.c -@@ -53,6 +53,9 @@ static const struct flash_info gigadevic - SPI_NOR_4B_OPCODES | SPI_NOR_HAS_LOCK | - SPI_NOR_HAS_TB | SPI_NOR_TB_SR_BIT6) - .fixups = &gd25q256_fixups }, -+ { "gd25q512", INFO(0xc84020, 0, 64 * 1024, 1024, -+ SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | -+ SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4B_OPCODES) }, - }; - - const struct spi_nor_manufacturer spi_nor_gigadevice = { diff --git a/target/linux/ramips/patches-5.10/700-net-ethernet-mediatek-support-net-labels.patch b/target/linux/ramips/patches-5.10/700-net-ethernet-mediatek-support-net-labels.patch deleted file mode 100644 index ec3ca93770cb..000000000000 --- a/target/linux/ramips/patches-5.10/700-net-ethernet-mediatek-support-net-labels.patch +++ /dev/null @@ -1,34 +0,0 @@ -From bd0f89de5476ca25e73fae829ba3e1dafae1d90d Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= -Date: Fri, 21 Jun 2019 10:04:05 +0200 -Subject: [PATCH] net: ethernet: mediatek: support net-labels - -With this patch, device name can be set within dts file in the same way as dsa -port can. -Add: label = "wan"; to GMAC node. - -Signed-off-by: René van Dorst ---- - drivers/net/ethernet/mediatek/mtk_eth_soc.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c -+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c -@@ -2901,6 +2901,7 @@ static const struct net_device_ops mtk_n - - static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np) - { -+ const char *name = of_get_property(np, "label", NULL); - const __be32 *_id = of_get_property(np, "reg", NULL); - phy_interface_t phy_mode; - struct phylink *phylink; -@@ -2993,6 +2994,9 @@ static int mtk_add_mac(struct mtk_eth *e - - eth->netdev[id]->max_mtu = MTK_MAX_RX_LENGTH - MTK_RX_ETH_HLEN; - -+ if (name) -+ strlcpy(eth->netdev[id]->name, name, IFNAMSIZ); -+ - return 0; - - free_netdev: diff --git a/target/linux/ramips/patches-5.10/710-at803x.patch b/target/linux/ramips/patches-5.10/710-at803x.patch deleted file mode 100644 index 2b0407d5258e..000000000000 --- a/target/linux/ramips/patches-5.10/710-at803x.patch +++ /dev/null @@ -1,149 +0,0 @@ -From 924453aa9d2324e5611f8e2b71df746d8f0c79f1 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Ren=C3=A9=20van=20Dorst?= -Date: Fri, 13 Nov 2020 16:11:32 +0100 -Subject: [PATCH] net: phy: at803x: add support for SFP module in - RGMII-to-x-base mode -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Signed-off-by: René van Dorst ---- - drivers/net/phy/at803x.c | 91 ++++++++++++++++++++++++++++++++++++++++ - 1 file changed, 91 insertions(+) - ---- a/drivers/net/phy/at803x.c -+++ b/drivers/net/phy/at803x.c -@@ -20,6 +20,8 @@ - #include - #include - #include -+#include -+#include - - #define AT803X_SPECIFIC_FUNCTION_CONTROL 0x10 - #define AT803X_SFC_ASSERT_CRS BIT(11) -@@ -83,9 +85,18 @@ - - #define AT803X_MODE_CFG_MASK 0x0F - #define AT803X_MODE_CFG_SGMII 0x01 -+#define AT803X_MODE_CFG_BX1000_RGMII_50 0x02 -+#define AT803X_MODE_CFG_BX1000_RGMII_75 0x03 -+#define AT803X_MODE_FIBER 0x01 -+#define AT803X_MODE_COPPER 0x00 - - #define AT803X_PSSR 0x11 /*PHY-Specific Status Register*/ - #define AT803X_PSSR_MR_AN_COMPLETE 0x0200 -+#define PSSR_LINK BIT(10) -+#define PSSR_SYNC_STATUS BIT(8) -+#define PSSR_DUPLEX BIT(13) -+#define PSSR_SPEED_1000 BIT(15) -+#define PSSR_SPEED_100 BIT(14) - - #define AT803X_DEBUG_REG_0 0x00 - #define AT803X_DEBUG_RX_CLK_DLY_EN BIT(15) -@@ -505,10 +516,72 @@ static int at803x_parse_dt(struct phy_de - return 0; - } - -+static int at803x_mode(struct phy_device *phydev) -+{ -+ int mode; -+ -+ mode = phy_read(phydev, AT803X_REG_CHIP_CONFIG) & AT803X_MODE_CFG_MASK; -+ -+ if (mode == AT803X_MODE_CFG_BX1000_RGMII_50 || -+ mode == AT803X_MODE_CFG_BX1000_RGMII_75) -+ return AT803X_MODE_FIBER; -+ return AT803X_MODE_COPPER; -+} -+ -+static int at803x_sfp_insert(void *upstream, const struct sfp_eeprom_id *id) -+{ -+ __ETHTOOL_DECLARE_LINK_MODE_MASK(at803x_support) = { 0, }; -+ __ETHTOOL_DECLARE_LINK_MODE_MASK(support) = { 0, }; -+ struct phy_device *phydev = upstream; -+ phy_interface_t iface; -+ -+ phylink_set(at803x_support, 1000baseX_Full); -+ /* AT803x only support 1000baseX but SGMII works fine when module runs -+ * at 1Gbit. -+ */ -+ phylink_set(at803x_support, 1000baseT_Full); -+ -+ sfp_parse_support(phydev->sfp_bus, id, support); -+ -+ // Limit to interfaces that both sides support -+ linkmode_and(support, support, at803x_support); -+ -+ if (linkmode_empty(support)) -+ goto unsupported_mode; -+ -+ iface = sfp_select_interface(phydev->sfp_bus, support); -+ -+ if (iface != PHY_INTERFACE_MODE_SGMII && -+ iface != PHY_INTERFACE_MODE_1000BASEX) -+ goto unsupported_mode; -+ -+ dev_info(&phydev->mdio.dev, "SFP interface %s", phy_modes(iface)); -+ -+ return 0; -+ -+unsupported_mode: -+ dev_info(&phydev->mdio.dev, "incompatible SFP module inserted;" -+ "Only SGMII at 1Gbit/1000BASEX are supported!\n"); -+ return -EINVAL; -+} -+ -+static const struct sfp_upstream_ops at803x_sfp_ops = { -+ .attach = phy_sfp_attach, -+ .detach = phy_sfp_detach, -+ .module_insert = at803x_sfp_insert, -+}; -+ - static int at803x_probe(struct phy_device *phydev) - { - struct device *dev = &phydev->mdio.dev; - struct at803x_priv *priv; -+ int ret; -+ -+ if (at803x_mode(phydev) == AT803X_MODE_FIBER) { -+ ret = phy_sfp_probe(phydev, &at803x_sfp_ops); -+ if (ret < 0) -+ return ret; -+ } - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) -@@ -709,6 +782,10 @@ static int at803x_read_status(struct phy - { - int ss, err, old_link = phydev->link; - -+ /* Handle (Fiber) SGMII to RGMII mode */ -+ if (at803x_mode(phydev) == AT803X_MODE_FIBER) -+ return genphy_c37_read_status(phydev); -+ - /* Update the link, but return if there was an error */ - err = genphy_update_link(phydev); - if (err) -@@ -809,6 +886,12 @@ static int at803x_config_aneg(struct phy - { - int ret; - -+ /* Handle (Fiber) SerDes to RGMII mode */ -+ if (at803x_mode(phydev) == AT803X_MODE_FIBER) { -+ pr_warn("%s: fiber\n", __func__); -+ return genphy_c37_config_aneg(phydev); -+ } -+ - ret = at803x_config_mdix(phydev, phydev->mdix_ctrl); - if (ret < 0) - return ret; -@@ -1120,6 +1203,7 @@ static struct phy_driver at803x_driver[] - .suspend = at803x_suspend, - .resume = at803x_resume, - /* PHY_GBIT_FEATURES */ -+ .config_aneg = at803x_config_aneg, - .read_status = at803x_read_status, - .aneg_done = at803x_aneg_done, - .ack_interrupt = &at803x_ack_interrupt, diff --git a/target/linux/ramips/patches-5.10/720-Revert-net-phy-simplify-phy_link_change-arguments.patch b/target/linux/ramips/patches-5.10/720-Revert-net-phy-simplify-phy_link_change-arguments.patch deleted file mode 100644 index c53b11ea31e2..000000000000 --- a/target/linux/ramips/patches-5.10/720-Revert-net-phy-simplify-phy_link_change-arguments.patch +++ /dev/null @@ -1,118 +0,0 @@ -From ffbb1b37a3e1ce1a5c574a6bd4f5aede8bc468ac Mon Sep 17 00:00:00 2001 -From: Ilya Lipnitskiy -Date: Sat, 27 Feb 2021 20:20:07 -0800 -Subject: [PATCH] Revert "net: phy: simplify phy_link_change arguments" - -This reverts commit a307593a644443db12888f45eed0dafb5869e2cc. - -This brings back the do_carrier flags used by the (hacky) next patch, -still required by target/linux/ramips/files/drivers/net/ethernet/ralink/mdio.c ---- - drivers/net/phy/phy.c | 12 ++++++------ - drivers/net/phy/phy_device.c | 12 +++++++----- - drivers/net/phy/phylink.c | 3 ++- - include/linux/phy.h | 2 +- - 4 files changed, 16 insertions(+), 13 deletions(-) - ---- a/drivers/net/phy/phy.c -+++ b/drivers/net/phy/phy.c -@@ -58,13 +58,13 @@ static const char *phy_state_to_str(enum - - static void phy_link_up(struct phy_device *phydev) - { -- phydev->phy_link_change(phydev, true); -+ phydev->phy_link_change(phydev, true, true); - phy_led_trigger_change_speed(phydev); - } - --static void phy_link_down(struct phy_device *phydev) -+static void phy_link_down(struct phy_device *phydev, bool do_carrier) - { -- phydev->phy_link_change(phydev, false); -+ phydev->phy_link_change(phydev, false, do_carrier); - phy_led_trigger_change_speed(phydev); - } - -@@ -616,7 +616,7 @@ int phy_start_cable_test(struct phy_devi - goto out; - - /* Mark the carrier down until the test is complete */ -- phy_link_down(phydev); -+ phy_link_down(phydev, true); - - netif_testing_on(dev); - err = phydev->drv->cable_test_start(phydev); -@@ -687,7 +687,7 @@ int phy_start_cable_test_tdr(struct phy_ - goto out; - - /* Mark the carrier down until the test is complete */ -- phy_link_down(phydev); -+ phy_link_down(phydev, true); - - netif_testing_on(dev); - err = phydev->drv->cable_test_tdr_start(phydev, config); -@@ -758,7 +758,7 @@ static int phy_check_link_status(struct - phy_link_up(phydev); - } else if (!phydev->link && phydev->state != PHY_NOLINK) { - phydev->state = PHY_NOLINK; -- phy_link_down(phydev); -+ phy_link_down(phydev, true); - } - - return 0; -@@ -1162,7 +1162,7 @@ void phy_state_machine(struct work_struc - case PHY_HALTED: - if (phydev->link) { - phydev->link = 0; -- phy_link_down(phydev); -+ phy_link_down(phydev, true); - } - do_suspend = true; - break; ---- a/drivers/net/phy/phy_device.c -+++ b/drivers/net/phy/phy_device.c -@@ -937,14 +937,16 @@ struct phy_device *phy_find_first(struct - } - EXPORT_SYMBOL(phy_find_first); - --static void phy_link_change(struct phy_device *phydev, bool up) -+static void phy_link_change(struct phy_device *phydev, bool up, bool do_carrier) - { - struct net_device *netdev = phydev->attached_dev; - -- if (up) -- netif_carrier_on(netdev); -- else -- netif_carrier_off(netdev); -+ if (do_carrier) { -+ if (up) -+ netif_carrier_on(netdev); -+ else -+ netif_carrier_off(netdev); -+ } - phydev->adjust_link(netdev); - if (phydev->mii_ts && phydev->mii_ts->link_state) - phydev->mii_ts->link_state(phydev->mii_ts, phydev); ---- a/drivers/net/phy/phylink.c -+++ b/drivers/net/phy/phylink.c -@@ -907,7 +907,8 @@ void phylink_destroy(struct phylink *pl) - } - EXPORT_SYMBOL_GPL(phylink_destroy); - --static void phylink_phy_change(struct phy_device *phydev, bool up) -+static void phylink_phy_change(struct phy_device *phydev, bool up, -+ bool do_carrier) - { - struct phylink *pl = phydev->phylink; - bool tx_pause, rx_pause; ---- a/include/linux/phy.h -+++ b/include/linux/phy.h -@@ -636,7 +636,7 @@ struct phy_device { - u8 mdix; - u8 mdix_ctrl; - -- void (*phy_link_change)(struct phy_device *phydev, bool up); -+ void (*phy_link_change)(struct phy_device *, bool up, bool do_carrier); - void (*adjust_link)(struct net_device *dev); - - #if IS_ENABLED(CONFIG_MACSEC) diff --git a/target/linux/ramips/patches-5.10/721-NET-no-auto-carrier-off-support.patch b/target/linux/ramips/patches-5.10/721-NET-no-auto-carrier-off-support.patch deleted file mode 100644 index 09170ab6322d..000000000000 --- a/target/linux/ramips/patches-5.10/721-NET-no-auto-carrier-off-support.patch +++ /dev/null @@ -1,47 +0,0 @@ -From 0b6eb1e68290243d439ee330ea8d0b239a5aec69 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Sun, 27 Jul 2014 09:38:50 +0100 -Subject: [PATCH 34/53] NET: multi phy support - -Signed-off-by: John Crispin ---- - drivers/net/phy/phy.c | 9 ++++++--- - include/linux/phy.h | 1 + - 2 files changed, 7 insertions(+), 3 deletions(-) - ---- a/drivers/net/phy/phy.c -+++ b/drivers/net/phy/phy.c -@@ -758,7 +758,10 @@ static int phy_check_link_status(struct - phy_link_up(phydev); - } else if (!phydev->link && phydev->state != PHY_NOLINK) { - phydev->state = PHY_NOLINK; -- phy_link_down(phydev, true); -+ if (!phydev->no_auto_carrier_off) -+ phy_link_down(phydev, true); -+ else -+ phy_link_down(phydev, false); - } - - return 0; -@@ -1162,7 +1165,10 @@ void phy_state_machine(struct work_struc - case PHY_HALTED: - if (phydev->link) { - phydev->link = 0; -- phy_link_down(phydev, true); -+ if (!phydev->no_auto_carrier_off) -+ phy_link_down(phydev, true); -+ else -+ phy_link_down(phydev, false); - } - do_suspend = true; - break; ---- a/include/linux/phy.h -+++ b/include/linux/phy.h -@@ -556,6 +556,7 @@ struct phy_device { - unsigned sysfs_links:1; - unsigned loopback_enabled:1; - unsigned downshifted_rate:1; -+ unsigned no_auto_carrier_off:1; - - unsigned autoneg:1; - /* The most recently read link state */ diff --git a/target/linux/ramips/patches-5.10/800-GPIO-add-named-gpio-exports.patch b/target/linux/ramips/patches-5.10/800-GPIO-add-named-gpio-exports.patch deleted file mode 100644 index fe34f0b21bc9..000000000000 --- a/target/linux/ramips/patches-5.10/800-GPIO-add-named-gpio-exports.patch +++ /dev/null @@ -1,165 +0,0 @@ -From 4267880319bc1a2270d352e0ded6d6386242a7ef Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Tue, 12 Aug 2014 20:49:27 +0200 -Subject: [PATCH 24/53] GPIO: add named gpio exports - -Signed-off-by: John Crispin ---- - drivers/gpio/gpiolib-of.c | 68 +++++++++++++++++++++++++++++++++++++++++ - drivers/gpio/gpiolib-sysfs.c | 10 +++++- - include/asm-generic/gpio.h | 6 ++++ - include/linux/gpio/consumer.h | 8 +++++ - 4 files changed, 91 insertions(+), 1 deletion(-) - ---- a/drivers/gpio/gpiolib-of.c -+++ b/drivers/gpio/gpiolib-of.c -@@ -19,6 +19,8 @@ - #include - #include - #include -+#include -+#include - - #include "gpiolib.h" - #include "gpiolib-of.h" -@@ -1039,3 +1041,68 @@ void of_gpiochip_remove(struct gpio_chip - { - of_node_put(chip->of_node); - } -+ -+static struct of_device_id gpio_export_ids[] = { -+ { .compatible = "gpio-export" }, -+ { /* sentinel */ } -+}; -+ -+static int of_gpio_export_probe(struct platform_device *pdev) -+{ -+ struct device_node *np = pdev->dev.of_node; -+ struct device_node *cnp; -+ u32 val; -+ int nb = 0; -+ -+ for_each_child_of_node(np, cnp) { -+ const char *name = NULL; -+ int gpio; -+ bool dmc; -+ int max_gpio = 1; -+ int i; -+ -+ of_property_read_string(cnp, "gpio-export,name", &name); -+ -+ if (!name) -+ max_gpio = of_gpio_count(cnp); -+ -+ for (i = 0; i < max_gpio; i++) { -+ unsigned flags = 0; -+ enum of_gpio_flags of_flags; -+ -+ gpio = of_get_gpio_flags(cnp, i, &of_flags); -+ if (!gpio_is_valid(gpio)) -+ return gpio; -+ -+ if (of_flags == OF_GPIO_ACTIVE_LOW) -+ flags |= GPIOF_ACTIVE_LOW; -+ -+ if (!of_property_read_u32(cnp, "gpio-export,output", &val)) -+ flags |= val ? GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW; -+ else -+ flags |= GPIOF_IN; -+ -+ if (devm_gpio_request_one(&pdev->dev, gpio, flags, name ? name : of_node_full_name(np))) -+ continue; -+ -+ dmc = of_property_read_bool(cnp, "gpio-export,direction_may_change"); -+ gpio_export_with_name(gpio, dmc, name); -+ nb++; -+ } -+ } -+ -+ dev_info(&pdev->dev, "%d gpio(s) exported\n", nb); -+ -+ return 0; -+} -+ -+static struct platform_driver gpio_export_driver = { -+ .driver = { -+ .name = "gpio-export", -+ .owner = THIS_MODULE, -+ .of_match_table = of_match_ptr(gpio_export_ids), -+ }, -+ .probe = of_gpio_export_probe, -+}; -+ -+module_platform_driver(gpio_export_driver); ---- a/drivers/gpio/gpiolib-sysfs.c -+++ b/drivers/gpio/gpiolib-sysfs.c -@@ -564,7 +564,7 @@ static struct class gpio_class = { - * - * Returns zero on success, else an error. - */ --int gpiod_export(struct gpio_desc *desc, bool direction_may_change) -+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name) - { - struct gpio_chip *chip; - struct gpio_device *gdev; -@@ -626,6 +626,8 @@ int gpiod_export(struct gpio_desc *desc, - offset = gpio_chip_hwgpio(desc); - if (chip->names && chip->names[offset]) - ioname = chip->names[offset]; -+ if (name) -+ ioname = name; - - dev = device_create_with_groups(&gpio_class, &gdev->dev, - MKDEV(0, 0), data, gpio_groups, -@@ -647,6 +649,12 @@ err_unlock: - gpiod_dbg(desc, "%s: status %d\n", __func__, status); - return status; - } -+EXPORT_SYMBOL_GPL(__gpiod_export); -+ -+int gpiod_export(struct gpio_desc *desc, bool direction_may_change) -+{ -+ return __gpiod_export(desc, direction_may_change, NULL); -+} - EXPORT_SYMBOL_GPL(gpiod_export); - - static int match_export(struct device *dev, const void *desc) ---- a/include/asm-generic/gpio.h -+++ b/include/asm-generic/gpio.h -@@ -125,6 +125,12 @@ static inline int gpio_export(unsigned g - return gpiod_export(gpio_to_desc(gpio), direction_may_change); - } - -+int __gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); -+static inline int gpio_export_with_name(unsigned gpio, bool direction_may_change, const char *name) -+{ -+ return __gpiod_export(gpio_to_desc(gpio), direction_may_change, name); -+} -+ - static inline int gpio_export_link(struct device *dev, const char *name, - unsigned gpio) - { ---- a/include/linux/gpio/consumer.h -+++ b/include/linux/gpio/consumer.h -@@ -713,6 +713,7 @@ static inline void devm_acpi_dev_remove_ - - #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_GPIO_SYSFS) - -+int _gpiod_export(struct gpio_desc *desc, bool direction_may_change, const char *name); - int gpiod_export(struct gpio_desc *desc, bool direction_may_change); - int gpiod_export_link(struct device *dev, const char *name, - struct gpio_desc *desc); -@@ -720,6 +721,13 @@ void gpiod_unexport(struct gpio_desc *de - - #else /* CONFIG_GPIOLIB && CONFIG_GPIO_SYSFS */ - -+static inline int _gpiod_export(struct gpio_desc *desc, -+ bool direction_may_change, -+ const char *name) -+{ -+ return -ENOSYS; -+} -+ - static inline int gpiod_export(struct gpio_desc *desc, - bool direction_may_change) - { diff --git a/target/linux/ramips/patches-5.10/801-DT-Add-documentation-for-gpio-ralink.patch b/target/linux/ramips/patches-5.10/801-DT-Add-documentation-for-gpio-ralink.patch deleted file mode 100644 index 7d5f98f64722..000000000000 --- a/target/linux/ramips/patches-5.10/801-DT-Add-documentation-for-gpio-ralink.patch +++ /dev/null @@ -1,59 +0,0 @@ -From d410e5478c622c01fcf31427533df5f433df9146 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Sun, 28 Jul 2013 19:45:30 +0200 -Subject: [PATCH 26/53] DT: Add documentation for gpio-ralink - -Describe gpio-ralink binding. - -Signed-off-by: John Crispin -Cc: linux-mips@linux-mips.org -Cc: devicetree@vger.kernel.org -Cc: linux-gpio@vger.kernel.org ---- - .../devicetree/bindings/gpio/gpio-ralink.txt | 40 ++++++++++++++++++++ - 1 file changed, 40 insertions(+) - create mode 100644 Documentation/devicetree/bindings/gpio/gpio-ralink.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt -@@ -0,0 +1,40 @@ -+Ralink SoC GPIO controller bindings -+ -+Required properties: -+- compatible: -+ - "ralink,rt2880-gpio" for Ralink controllers -+- #gpio-cells : Should be two. -+ - first cell is the pin number -+ - second cell is used to specify optional parameters (unused) -+- gpio-controller : Marks the device node as a GPIO controller -+- reg : Physical base address and length of the controller's registers -+- interrupt-parent: phandle to the INTC device node -+- interrupts : Specify the INTC interrupt number -+- ralink,num-gpios : Specify the number of GPIOs -+- ralink,register-map : The register layout depends on the GPIO bank and actual -+ SoC type. Register offsets need to be in this order. -+ [ INT, EDGE, RENA, FENA, DATA, DIR, POL, SET, RESET, TOGGLE ] -+ -+Optional properties: -+- ralink,gpio-base : Specify the GPIO chips base number -+ -+Example: -+ -+ gpio0: gpio@600 { -+ compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio"; -+ -+ #gpio-cells = <2>; -+ gpio-controller; -+ -+ reg = <0x600 0x34>; -+ -+ interrupt-parent = <&intc>; -+ interrupts = <6>; -+ -+ ralink,gpio-base = <0>; -+ ralink,num-gpios = <24>; -+ ralink,register-map = [ 00 04 08 0c -+ 20 24 28 2c -+ 30 34 ]; -+ -+ }; diff --git a/target/linux/ramips/patches-5.10/802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch b/target/linux/ramips/patches-5.10/802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch deleted file mode 100644 index 141d29f9401c..000000000000 --- a/target/linux/ramips/patches-5.10/802-GPIO-MIPS-ralink-add-gpio-driver-for-ralink-SoC.patch +++ /dev/null @@ -1,416 +0,0 @@ -From 69fdd2c4f937796b934e89c33acde9d082e27bfd Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 4 Aug 2014 20:36:29 +0200 -Subject: [PATCH 27/53] GPIO: MIPS: ralink: add gpio driver for ralink SoC - -Add gpio driver for Ralink SoC. This driver makes the gpio core on -RT2880, RT305x, rt3352, rt3662, rt3883, rt5350 and mt7620 work. - -Signed-off-by: John Crispin -Cc: linux-mips@linux-mips.org -Cc: linux-gpio@vger.kernel.org ---- - arch/mips/include/asm/mach-ralink/gpio.h | 24 ++ - drivers/gpio/Kconfig | 6 + - drivers/gpio/Makefile | 1 + - drivers/gpio/gpio-ralink.c | 355 ++++++++++++++++++++++++++++++ - 4 files changed, 386 insertions(+) - create mode 100644 arch/mips/include/asm/mach-ralink/gpio.h - create mode 100644 drivers/gpio/gpio-ralink.c - ---- /dev/null -+++ b/arch/mips/include/asm/mach-ralink/gpio.h -@@ -0,0 +1,24 @@ -+/* -+ * Ralink SoC GPIO API support -+ * -+ * Copyright (C) 2008-2009 Gabor Juhos -+ * Copyright (C) 2008 Imre Kaloz -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ */ -+ -+#ifndef __ASM_MACH_RALINK_GPIO_H -+#define __ASM_MACH_RALINK_GPIO_H -+ -+#define ARCH_NR_GPIOS 128 -+#include -+ -+#define gpio_get_value __gpio_get_value -+#define gpio_set_value __gpio_set_value -+#define gpio_cansleep __gpio_cansleep -+#define gpio_to_irq __gpio_to_irq -+ -+#endif /* __ASM_MACH_RALINK_GPIO_H */ ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -535,6 +535,12 @@ config GPIO_SNPS_CREG - where only several fields in register belong to GPIO lines and - each GPIO line owns a field with different length and on/off value. - -+config GPIO_RALINK -+ bool "Ralink GPIO Support" -+ depends on RALINK -+ help -+ Say yes here to support the Ralink SoC GPIO device -+ - config GPIO_SPEAR_SPICS - bool "ST SPEAr13xx SPI Chip Select as GPIO support" - depends on PLAT_SPEAR ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -119,6 +119,7 @@ obj-$(CONFIG_GPIO_PISOSR) += gpio-pisos - obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o - obj-$(CONFIG_GPIO_PMIC_EIC_SPRD) += gpio-pmic-eic-sprd.o - obj-$(CONFIG_GPIO_PXA) += gpio-pxa.o -+obj-$(CONFIG_GPIO_RALINK) += gpio-ralink.o - obj-$(CONFIG_GPIO_RASPBERRYPI_EXP) += gpio-raspberrypi-exp.o - obj-$(CONFIG_GPIO_RC5T583) += gpio-rc5t583.o - obj-$(CONFIG_GPIO_RCAR) += gpio-rcar.o ---- /dev/null -+++ b/drivers/gpio/gpio-ralink.c -@@ -0,0 +1,341 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License version 2 as published -+ * by the Free Software Foundation. -+ * -+ * Copyright (C) 2009-2011 Gabor Juhos -+ * Copyright (C) 2013 John Crispin -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+enum ralink_gpio_reg { -+ GPIO_REG_INT = 0, -+ GPIO_REG_EDGE, -+ GPIO_REG_RENA, -+ GPIO_REG_FENA, -+ GPIO_REG_DATA, -+ GPIO_REG_DIR, -+ GPIO_REG_POL, -+ GPIO_REG_SET, -+ GPIO_REG_RESET, -+ GPIO_REG_TOGGLE, -+ GPIO_REG_MAX -+}; -+ -+struct ralink_gpio_chip { -+ struct gpio_chip chip; -+ u8 regs[GPIO_REG_MAX]; -+ -+ spinlock_t lock; -+ void __iomem *membase; -+ struct irq_domain *domain; -+ int irq; -+ -+ u32 rising; -+ u32 falling; -+}; -+ -+#define MAP_MAX 4 -+static struct irq_domain *irq_map[MAP_MAX]; -+static int irq_map_count; -+static atomic_t irq_refcount = ATOMIC_INIT(0); -+ -+static inline struct ralink_gpio_chip *to_ralink_gpio(struct gpio_chip *chip) -+{ -+ struct ralink_gpio_chip *rg; -+ -+ rg = container_of(chip, struct ralink_gpio_chip, chip); -+ -+ return rg; -+} -+ -+static inline void rt_gpio_w32(struct ralink_gpio_chip *rg, u8 reg, u32 val) -+{ -+ iowrite32(val, rg->membase + rg->regs[reg]); -+} -+ -+static inline u32 rt_gpio_r32(struct ralink_gpio_chip *rg, u8 reg) -+{ -+ return ioread32(rg->membase + rg->regs[reg]); -+} -+ -+static void ralink_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -+{ -+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip); -+ -+ rt_gpio_w32(rg, (value) ? GPIO_REG_SET : GPIO_REG_RESET, BIT(offset)); -+} -+ -+static int ralink_gpio_get(struct gpio_chip *chip, unsigned offset) -+{ -+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip); -+ -+ return !!(rt_gpio_r32(rg, GPIO_REG_DATA) & BIT(offset)); -+} -+ -+static int ralink_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -+{ -+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip); -+ unsigned long flags; -+ u32 t; -+ -+ spin_lock_irqsave(&rg->lock, flags); -+ t = rt_gpio_r32(rg, GPIO_REG_DIR); -+ t &= ~BIT(offset); -+ rt_gpio_w32(rg, GPIO_REG_DIR, t); -+ spin_unlock_irqrestore(&rg->lock, flags); -+ -+ return 0; -+} -+ -+static int ralink_gpio_direction_output(struct gpio_chip *chip, -+ unsigned offset, int value) -+{ -+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip); -+ unsigned long flags; -+ u32 t; -+ -+ spin_lock_irqsave(&rg->lock, flags); -+ ralink_gpio_set(chip, offset, value); -+ t = rt_gpio_r32(rg, GPIO_REG_DIR); -+ t |= BIT(offset); -+ rt_gpio_w32(rg, GPIO_REG_DIR, t); -+ spin_unlock_irqrestore(&rg->lock, flags); -+ -+ return 0; -+} -+ -+static int ralink_gpio_to_irq(struct gpio_chip *chip, unsigned pin) -+{ -+ struct ralink_gpio_chip *rg = to_ralink_gpio(chip); -+ -+ if (rg->irq < 1) -+ return -1; -+ -+ return irq_create_mapping(rg->domain, pin); -+} -+ -+static void ralink_gpio_irq_handler(struct irq_desc *desc) -+{ -+ int i; -+ -+ for (i = 0; i < irq_map_count; i++) { -+ struct irq_domain *domain = irq_map[i]; -+ struct ralink_gpio_chip *rg; -+ unsigned long pending; -+ int bit; -+ -+ rg = (struct ralink_gpio_chip *) domain->host_data; -+ pending = rt_gpio_r32(rg, GPIO_REG_INT); -+ -+ for_each_set_bit(bit, &pending, rg->chip.ngpio) { -+ u32 map = irq_find_mapping(domain, bit); -+ generic_handle_irq(map); -+ rt_gpio_w32(rg, GPIO_REG_INT, BIT(bit)); -+ } -+ } -+} -+ -+static void ralink_gpio_irq_unmask(struct irq_data *d) -+{ -+ struct ralink_gpio_chip *rg; -+ unsigned long flags; -+ u32 rise, fall; -+ -+ rg = (struct ralink_gpio_chip *) d->domain->host_data; -+ rise = rt_gpio_r32(rg, GPIO_REG_RENA); -+ fall = rt_gpio_r32(rg, GPIO_REG_FENA); -+ -+ spin_lock_irqsave(&rg->lock, flags); -+ rt_gpio_w32(rg, GPIO_REG_RENA, rise | (BIT(d->hwirq) & rg->rising)); -+ rt_gpio_w32(rg, GPIO_REG_FENA, fall | (BIT(d->hwirq) & rg->falling)); -+ spin_unlock_irqrestore(&rg->lock, flags); -+} -+ -+static void ralink_gpio_irq_mask(struct irq_data *d) -+{ -+ struct ralink_gpio_chip *rg; -+ unsigned long flags; -+ u32 rise, fall; -+ -+ rg = (struct ralink_gpio_chip *) d->domain->host_data; -+ rise = rt_gpio_r32(rg, GPIO_REG_RENA); -+ fall = rt_gpio_r32(rg, GPIO_REG_FENA); -+ -+ spin_lock_irqsave(&rg->lock, flags); -+ rt_gpio_w32(rg, GPIO_REG_FENA, fall & ~BIT(d->hwirq)); -+ rt_gpio_w32(rg, GPIO_REG_RENA, rise & ~BIT(d->hwirq)); -+ spin_unlock_irqrestore(&rg->lock, flags); -+} -+ -+static int ralink_gpio_irq_type(struct irq_data *d, unsigned int type) -+{ -+ struct ralink_gpio_chip *rg; -+ u32 mask = BIT(d->hwirq); -+ -+ rg = (struct ralink_gpio_chip *) d->domain->host_data; -+ -+ if (type == IRQ_TYPE_PROBE) { -+ if ((rg->rising | rg->falling) & mask) -+ return 0; -+ -+ type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING; -+ } -+ -+ if (type & IRQ_TYPE_EDGE_RISING) -+ rg->rising |= mask; -+ else -+ rg->rising &= ~mask; -+ -+ if (type & IRQ_TYPE_EDGE_FALLING) -+ rg->falling |= mask; -+ else -+ rg->falling &= ~mask; -+ -+ return 0; -+} -+ -+static struct irq_chip ralink_gpio_irq_chip = { -+ .name = "GPIO", -+ .irq_unmask = ralink_gpio_irq_unmask, -+ .irq_mask = ralink_gpio_irq_mask, -+ .irq_mask_ack = ralink_gpio_irq_mask, -+ .irq_set_type = ralink_gpio_irq_type, -+}; -+ -+static int gpio_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) -+{ -+ irq_set_chip_and_handler(irq, &ralink_gpio_irq_chip, handle_level_irq); -+ irq_set_handler_data(irq, d); -+ -+ return 0; -+} -+ -+static const struct irq_domain_ops irq_domain_ops = { -+ .xlate = irq_domain_xlate_onecell, -+ .map = gpio_map, -+}; -+ -+static void ralink_gpio_irq_init(struct device_node *np, -+ struct ralink_gpio_chip *rg) -+{ -+ if (irq_map_count >= MAP_MAX) -+ return; -+ -+ rg->irq = irq_of_parse_and_map(np, 0); -+ if (!rg->irq) -+ return; -+ -+ rg->domain = irq_domain_add_linear(np, rg->chip.ngpio, -+ &irq_domain_ops, rg); -+ if (!rg->domain) { -+ dev_err(rg->chip.parent, "irq_domain_add_linear failed\n"); -+ return; -+ } -+ -+ irq_map[irq_map_count++] = rg->domain; -+ -+ rt_gpio_w32(rg, GPIO_REG_RENA, 0x0); -+ rt_gpio_w32(rg, GPIO_REG_FENA, 0x0); -+ -+ if (!atomic_read(&irq_refcount)) -+ irq_set_chained_handler(rg->irq, ralink_gpio_irq_handler); -+ atomic_inc(&irq_refcount); -+ -+ dev_info(rg->chip.parent, "registering %d irq handlers\n", rg->chip.ngpio); -+} -+ -+static int ralink_gpio_probe(struct platform_device *pdev) -+{ -+ struct device_node *np = pdev->dev.of_node; -+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ struct ralink_gpio_chip *rg; -+ const __be32 *ngpio, *gpiobase; -+ -+ if (!res) { -+ dev_err(&pdev->dev, "failed to find resource\n"); -+ return -ENOMEM; -+ } -+ -+ rg = devm_kzalloc(&pdev->dev, -+ sizeof(struct ralink_gpio_chip), GFP_KERNEL); -+ if (!rg) -+ return -ENOMEM; -+ -+ rg->membase = devm_ioremap_resource(&pdev->dev, res); -+ if (!rg->membase) { -+ dev_err(&pdev->dev, "cannot remap I/O memory region\n"); -+ return -ENOMEM; -+ } -+ -+ if (of_property_read_u8_array(np, "ralink,register-map", -+ rg->regs, GPIO_REG_MAX)) { -+ dev_err(&pdev->dev, "failed to read register definition\n"); -+ return -EINVAL; -+ } -+ -+ ngpio = of_get_property(np, "ralink,num-gpios", NULL); -+ if (!ngpio) { -+ dev_err(&pdev->dev, "failed to read number of pins\n"); -+ return -EINVAL; -+ } -+ -+ gpiobase = of_get_property(np, "ralink,gpio-base", NULL); -+ if (gpiobase) -+ rg->chip.base = be32_to_cpu(*gpiobase); -+ else -+ rg->chip.base = -1; -+ -+ spin_lock_init(&rg->lock); -+ -+ rg->chip.parent = &pdev->dev; -+ rg->chip.label = dev_name(&pdev->dev); -+ rg->chip.of_node = np; -+ rg->chip.ngpio = be32_to_cpu(*ngpio); -+ rg->chip.direction_input = ralink_gpio_direction_input; -+ rg->chip.direction_output = ralink_gpio_direction_output; -+ rg->chip.get = ralink_gpio_get; -+ rg->chip.set = ralink_gpio_set; -+ rg->chip.request = gpiochip_generic_request; -+ rg->chip.to_irq = ralink_gpio_to_irq; -+ rg->chip.free = gpiochip_generic_free; -+ -+ /* set polarity to low for all lines */ -+ rt_gpio_w32(rg, GPIO_REG_POL, 0); -+ -+ dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio); -+ -+ ralink_gpio_irq_init(np, rg); -+ -+ return gpiochip_add(&rg->chip); -+} -+ -+static const struct of_device_id ralink_gpio_match[] = { -+ { .compatible = "ralink,rt2880-gpio" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, ralink_gpio_match); -+ -+static struct platform_driver ralink_gpio_driver = { -+ .probe = ralink_gpio_probe, -+ .driver = { -+ .name = "rt2880_gpio", -+ .owner = THIS_MODULE, -+ .of_match_table = ralink_gpio_match, -+ }, -+}; -+ -+static int __init ralink_gpio_init(void) -+{ -+ return platform_driver_register(&ralink_gpio_driver); -+} -+ -+subsys_initcall(ralink_gpio_init); diff --git a/target/linux/ramips/patches-5.10/803-gpio-ralink-Add-support-for-GPIO-as-interrupt-contro.patch b/target/linux/ramips/patches-5.10/803-gpio-ralink-Add-support-for-GPIO-as-interrupt-contro.patch deleted file mode 100644 index 8520ce32ff7b..000000000000 --- a/target/linux/ramips/patches-5.10/803-gpio-ralink-Add-support-for-GPIO-as-interrupt-contro.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 57fa7f2f4ef6f78ce1d30509c0d111aa3791b524 Mon Sep 17 00:00:00 2001 -From: Daniel Santos -Date: Sun, 4 Nov 2018 20:24:32 -0600 -Subject: gpio-ralink: Add support for GPIO as interrupt-controller - -Signed-off-by: Daniel Santos ---- - Documentation/devicetree/bindings/gpio/gpio-ralink.txt | 6 ++++++ - drivers/gpio/gpio-ralink.c | 2 +- - 2 files changed, 7 insertions(+), 1 deletion(-) - ---- a/Documentation/devicetree/bindings/gpio/gpio-ralink.txt -+++ b/Documentation/devicetree/bindings/gpio/gpio-ralink.txt -@@ -17,6 +17,9 @@ Required properties: - - Optional properties: - - ralink,gpio-base : Specify the GPIO chips base number -+- interrupt-controller : marks this as an interrupt controller -+- #interrupt-cells : a standard two-cell interrupt flag, see -+ interrupt-controller/interrupts.txt - - Example: - -@@ -28,6 +31,9 @@ Example: - - reg = <0x600 0x34>; - -+ interrupt-controller; -+ #interrupt-cells = <2>; -+ - interrupt-parent = <&intc>; - interrupts = <6>; - ---- a/drivers/gpio/gpio-ralink.c -+++ b/drivers/gpio/gpio-ralink.c -@@ -220,7 +220,7 @@ static int gpio_map(struct irq_domain *d - } - - static const struct irq_domain_ops irq_domain_ops = { -- .xlate = irq_domain_xlate_onecell, -+ .xlate = irq_domain_xlate_twocell, - .map = gpio_map, - }; - diff --git a/target/linux/ramips/patches-5.10/810-uvc-add-iPassion-iP2970-support.patch b/target/linux/ramips/patches-5.10/810-uvc-add-iPassion-iP2970-support.patch deleted file mode 100644 index 410f369f70ac..000000000000 --- a/target/linux/ramips/patches-5.10/810-uvc-add-iPassion-iP2970-support.patch +++ /dev/null @@ -1,246 +0,0 @@ -From 975e76214cd2516eb6cfff4c3eec581872645e88 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 19 Sep 2013 01:50:59 +0200 -Subject: [PATCH 31/53] uvc: add iPassion iP2970 support - -Signed-off-by: John Crispin ---- - drivers/media/usb/uvc/uvc_driver.c | 12 +++ - drivers/media/usb/uvc/uvc_status.c | 2 + - drivers/media/usb/uvc/uvc_video.c | 147 ++++++++++++++++++++++++++++++++++++ - drivers/media/usb/uvc/uvcvideo.h | 5 +- - 4 files changed, 165 insertions(+), 1 deletion(-) - ---- a/drivers/media/usb/uvc/uvc_driver.c -+++ b/drivers/media/usb/uvc/uvc_driver.c -@@ -2969,6 +2969,18 @@ static const struct usb_device_id uvc_id - .bInterfaceSubClass = 1, - .bInterfaceProtocol = 0, - .driver_info = UVC_INFO_META(V4L2_META_FMT_D4XX) }, -+ /* iPassion iP2970 */ -+ { .match_flags = USB_DEVICE_ID_MATCH_DEVICE -+ | USB_DEVICE_ID_MATCH_INT_INFO, -+ .idVendor = 0x1B3B, -+ .idProduct = 0x2970, -+ .bInterfaceClass = USB_CLASS_VIDEO, -+ .bInterfaceSubClass = 1, -+ .bInterfaceProtocol = 0, -+ .driver_info = UVC_QUIRK_PROBE_MINMAX -+ | UVC_QUIRK_STREAM_NO_FID -+ | UVC_QUIRK_MOTION -+ | UVC_QUIRK_SINGLE_ISO }, - /* Generic USB Video Class */ - { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_UNDEFINED) }, - { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, UVC_PC_PROTOCOL_15) }, ---- a/drivers/media/usb/uvc/uvc_status.c -+++ b/drivers/media/usb/uvc/uvc_status.c -@@ -223,6 +223,7 @@ static void uvc_status_complete(struct u - if (uvc_event_control(urb, status, len)) - /* The URB will be resubmitted in work context. */ - return; -+ dev->motion = 1; - break; - } - -@@ -271,6 +272,7 @@ int uvc_status_init(struct uvc_device *d - } - - pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress); -+ dev->motion = 0; - - /* For high-speed interrupt endpoints, the bInterval value is used as - * an exponent of two. Some developers forgot about it. ---- a/drivers/media/usb/uvc/uvc_video.c -+++ b/drivers/media/usb/uvc/uvc_video.c -@@ -16,6 +16,11 @@ - #include - #include - #include -+#include -+#include -+#include -+#include -+#include - - #include - -@@ -1156,9 +1161,149 @@ static void uvc_video_decode_data(struct - uvc_urb->async_operations++; - } - -+struct bh_priv { -+ unsigned long seen; -+}; -+ -+struct bh_event { -+ const char *name; -+ struct sk_buff *skb; -+ struct work_struct work; -+}; -+ -+#define BH_ERR(fmt, args...) printk(KERN_ERR "%s: " fmt, "webcam", ##args ) -+#define BH_DBG(fmt, args...) do {} while (0) -+#define BH_SKB_SIZE 2048 -+ -+extern u64 uevent_next_seqnum(void); -+static int seen = 0; -+ -+static int bh_event_add_var(struct bh_event *event, int argv, -+ const char *format, ...) -+{ -+ static char buf[128]; -+ char *s; -+ va_list args; -+ int len; -+ -+ if (argv) -+ return 0; -+ -+ va_start(args, format); -+ len = vsnprintf(buf, sizeof(buf), format, args); -+ va_end(args); -+ -+ if (len >= sizeof(buf)) { -+ BH_ERR("buffer size too small\n"); -+ WARN_ON(1); -+ return -ENOMEM; -+ } -+ -+ s = skb_put(event->skb, len + 1); -+ strcpy(s, buf); -+ -+ BH_DBG("added variable '%s'\n", s); -+ -+ return 0; -+} -+ -+static int motion_hotplug_fill_event(struct bh_event *event) -+{ -+ int s = jiffies; -+ int ret; -+ -+ if (!seen) -+ seen = jiffies; -+ -+ ret = bh_event_add_var(event, 0, "HOME=%s", "/"); -+ if (ret) -+ return ret; -+ -+ ret = bh_event_add_var(event, 0, "PATH=%s", -+ "/sbin:/bin:/usr/sbin:/usr/bin"); -+ if (ret) -+ return ret; -+ -+ ret = bh_event_add_var(event, 0, "SUBSYSTEM=usb"); -+ if (ret) -+ return ret; -+ -+ ret = bh_event_add_var(event, 0, "ACTION=motion"); -+ if (ret) -+ return ret; -+ -+ ret = bh_event_add_var(event, 0, "SEEN=%d", s - seen); -+ if (ret) -+ return ret; -+ seen = s; -+ -+ ret = bh_event_add_var(event, 0, "SEQNUM=%llu", uevent_next_seqnum()); -+ -+ return ret; -+} -+ -+static void motion_hotplug_work(struct work_struct *work) -+{ -+ struct bh_event *event = container_of(work, struct bh_event, work); -+ int ret = 0; -+ -+ event->skb = alloc_skb(BH_SKB_SIZE, GFP_KERNEL); -+ if (!event->skb) -+ goto out_free_event; -+ -+ ret = bh_event_add_var(event, 0, "%s@", "add"); -+ if (ret) -+ goto out_free_skb; -+ -+ ret = motion_hotplug_fill_event(event); -+ if (ret) -+ goto out_free_skb; -+ -+ NETLINK_CB(event->skb).dst_group = 1; -+ broadcast_uevent(event->skb, 0, 1, GFP_KERNEL); -+ -+out_free_skb: -+ if (ret) { -+ BH_ERR("work error %d\n", ret); -+ kfree_skb(event->skb); -+ } -+out_free_event: -+ kfree(event); -+} -+ -+static int motion_hotplug_create_event(void) -+{ -+ struct bh_event *event; -+ -+ event = kzalloc(sizeof(*event), GFP_KERNEL); -+ if (!event) -+ return -ENOMEM; -+ -+ event->name = "motion"; -+ -+ INIT_WORK(&event->work, (void *)(void *)motion_hotplug_work); -+ schedule_work(&event->work); -+ -+ return 0; -+} -+ -+#define MOTION_FLAG_OFFSET 4 - static void uvc_video_decode_end(struct uvc_streaming *stream, - struct uvc_buffer *buf, const u8 *data, int len) - { -+ if ((stream->dev->quirks & UVC_QUIRK_MOTION) && -+ (data[len - 2] == 0xff) && (data[len - 1] == 0xd9)) { -+ u8 *mem; -+ buf->state = UVC_BUF_STATE_READY; -+ mem = (u8 *) (buf->mem + MOTION_FLAG_OFFSET); -+ if ( stream->dev->motion ) { -+ stream->dev->motion = 0; -+ motion_hotplug_create_event(); -+ } else { -+ *mem &= 0x7f; -+ } -+ } -+ - /* Mark the buffer as done if the EOF marker is set. */ - if (data[1] & UVC_STREAM_EOF && buf->bytesused != 0) { - uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n"); -@@ -1715,6 +1860,8 @@ static int uvc_init_video_isoc(struct uv - if (npackets == 0) - return -ENOMEM; - -+ if (stream->dev->quirks & UVC_QUIRK_SINGLE_ISO) -+ npackets = 1; - size = npackets * psize; - - for_each_uvc_urb(uvc_urb, stream) { ---- a/drivers/media/usb/uvc/uvcvideo.h -+++ b/drivers/media/usb/uvc/uvcvideo.h -@@ -203,7 +203,9 @@ - #define UVC_QUIRK_RESTORE_CTRLS_ON_INIT 0x00000400 - #define UVC_QUIRK_FORCE_Y8 0x00000800 - #define UVC_QUIRK_FORCE_BPP 0x00001000 -- -+#define UVC_QUIRK_MOTION 0x00001000 -+#define UVC_QUIRK_SINGLE_ISO 0x00002000 -+ - /* Format flags */ - #define UVC_FMT_FLAG_COMPRESSED 0x00000001 - #define UVC_FMT_FLAG_STREAM 0x00000002 -@@ -672,6 +674,7 @@ struct uvc_device { - u8 *status; - struct input_dev *input; - char input_phys[64]; -+ int motion; - - struct uvc_ctrl_work { - struct work_struct work; diff --git a/target/linux/ramips/patches-5.10/820-DT-Add-documentation-for-spi-rt2880.patch b/target/linux/ramips/patches-5.10/820-DT-Add-documentation-for-spi-rt2880.patch deleted file mode 100644 index e2643e3f2544..000000000000 --- a/target/linux/ramips/patches-5.10/820-DT-Add-documentation-for-spi-rt2880.patch +++ /dev/null @@ -1,44 +0,0 @@ -From da6015e7f19d749f135f7ac55c4ec47b06faa868 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Fri, 9 Aug 2013 20:12:59 +0200 -Subject: [PATCH 41/53] DT: Add documentation for spi-rt2880 - -Describe the SPI master found on the MIPS based Ralink RT2880 SoC. - -Signed-off-by: John Crispin ---- - .../devicetree/bindings/spi/spi-rt2880.txt | 28 ++++++++++++++++++++ - 1 file changed, 28 insertions(+) - create mode 100644 Documentation/devicetree/bindings/spi/spi-rt2880.txt - ---- /dev/null -+++ b/Documentation/devicetree/bindings/spi/spi-rt2880.txt -@@ -0,0 +1,28 @@ -+Ralink SoC RT2880 SPI master controller. -+ -+This SPI controller is found on most wireless SoCs made by ralink. -+ -+Required properties: -+- compatible : "ralink,rt2880-spi" -+- reg : The register base for the controller. -+- #address-cells : <1>, as required by generic SPI binding. -+- #size-cells : <0>, also as required by generic SPI binding. -+ -+Child nodes as per the generic SPI binding. -+ -+Example: -+ -+ spi@b00 { -+ compatible = "ralink,rt2880-spi"; -+ reg = <0xb00 0x100>; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ m25p80@0 { -+ compatible = "m25p80"; -+ reg = <0>; -+ spi-max-frequency = <10000000>; -+ }; -+ }; -+ diff --git a/target/linux/ramips/patches-5.10/821-SPI-ralink-add-Ralink-SoC-spi-driver.patch b/target/linux/ramips/patches-5.10/821-SPI-ralink-add-Ralink-SoC-spi-driver.patch deleted file mode 100644 index f656c1071c81..000000000000 --- a/target/linux/ramips/patches-5.10/821-SPI-ralink-add-Ralink-SoC-spi-driver.patch +++ /dev/null @@ -1,574 +0,0 @@ -From 683af4ebb91a1600df1946ac4769d916b8a1be65 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Sun, 27 Jul 2014 11:15:12 +0100 -Subject: [PATCH 42/53] SPI: ralink: add Ralink SoC spi driver - -Add the driver needed to make SPI work on Ralink SoC. - -Signed-off-by: Gabor Juhos -Acked-by: John Crispin ---- - drivers/spi/Kconfig | 6 + - drivers/spi/Makefile | 1 + - drivers/spi/spi-rt2880.c | 530 ++++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 537 insertions(+) - create mode 100644 drivers/spi/spi-rt2880.c - ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -689,6 +689,12 @@ config SPI_QCOM_GENI - This driver can also be built as a module. If so, the module - will be called spi-geni-qcom. - -+config SPI_RT2880 -+ tristate "Ralink RT288x SPI Controller" -+ depends on RALINK -+ help -+ This selects a driver for the Ralink RT288x/RT305x SPI Controller. -+ - config SPI_S3C24XX - tristate "Samsung S3C24XX series SPI" - depends on ARCH_S3C24XX ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -96,6 +96,7 @@ obj-$(CONFIG_SPI_ROCKCHIP) += spi-rockc - obj-$(CONFIG_SPI_RB4XX) += spi-rb4xx.o - obj-$(CONFIG_SPI_RPCIF) += spi-rpc-if.o - obj-$(CONFIG_SPI_RSPI) += spi-rspi.o -+obj-$(CONFIG_SPI_RT2880) += spi-rt2880.o - obj-$(CONFIG_SPI_S3C24XX) += spi-s3c24xx-hw.o - spi-s3c24xx-hw-y := spi-s3c24xx.o - obj-$(CONFIG_SPI_S3C64XX) += spi-s3c64xx.o ---- /dev/null -+++ b/drivers/spi/spi-rt2880.c -@@ -0,0 +1,530 @@ -+/* -+ * spi-rt2880.c -- Ralink RT288x/RT305x SPI controller driver -+ * -+ * Copyright (C) 2011 Sergiy -+ * Copyright (C) 2011-2013 Gabor Juhos -+ * -+ * Some parts are based on spi-orion.c: -+ * Author: Shadi Ammouri -+ * Copyright (C) 2007-2008 Marvell Ltd. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define DRIVER_NAME "spi-rt2880" -+ -+#define RAMIPS_SPI_STAT 0x00 -+#define RAMIPS_SPI_CFG 0x10 -+#define RAMIPS_SPI_CTL 0x14 -+#define RAMIPS_SPI_DATA 0x20 -+#define RAMIPS_SPI_ADDR 0x24 -+#define RAMIPS_SPI_BS 0x28 -+#define RAMIPS_SPI_USER 0x2C -+#define RAMIPS_SPI_TXFIFO 0x30 -+#define RAMIPS_SPI_RXFIFO 0x34 -+#define RAMIPS_SPI_FIFO_STAT 0x38 -+#define RAMIPS_SPI_MODE 0x3C -+#define RAMIPS_SPI_DEV_OFFSET 0x40 -+#define RAMIPS_SPI_DMA 0x80 -+#define RAMIPS_SPI_DMASTAT 0x84 -+#define RAMIPS_SPI_ARBITER 0xF0 -+ -+/* SPISTAT register bit field */ -+#define SPISTAT_BUSY BIT(0) -+ -+/* SPICFG register bit field */ -+#define SPICFG_ADDRMODE BIT(12) -+#define SPICFG_RXENVDIS BIT(11) -+#define SPICFG_RXCAP BIT(10) -+#define SPICFG_SPIENMODE BIT(9) -+#define SPICFG_MSBFIRST BIT(8) -+#define SPICFG_SPICLKPOL BIT(6) -+#define SPICFG_RXCLKEDGE_FALLING BIT(5) -+#define SPICFG_TXCLKEDGE_FALLING BIT(4) -+#define SPICFG_HIZSPI BIT(3) -+#define SPICFG_SPICLK_PRESCALE_MASK 0x7 -+#define SPICFG_SPICLK_DIV2 0 -+#define SPICFG_SPICLK_DIV4 1 -+#define SPICFG_SPICLK_DIV8 2 -+#define SPICFG_SPICLK_DIV16 3 -+#define SPICFG_SPICLK_DIV32 4 -+#define SPICFG_SPICLK_DIV64 5 -+#define SPICFG_SPICLK_DIV128 6 -+#define SPICFG_SPICLK_DISABLE 7 -+ -+/* SPICTL register bit field */ -+#define SPICTL_START BIT(4) -+#define SPICTL_HIZSDO BIT(3) -+#define SPICTL_STARTWR BIT(2) -+#define SPICTL_STARTRD BIT(1) -+#define SPICTL_SPIENA BIT(0) -+ -+/* SPIUSER register bit field */ -+#define SPIUSER_USERMODE BIT(21) -+#define SPIUSER_INSTR_PHASE BIT(20) -+#define SPIUSER_ADDR_PHASE_MASK 0x7 -+#define SPIUSER_ADDR_PHASE_OFFSET 17 -+#define SPIUSER_MODE_PHASE BIT(16) -+#define SPIUSER_DUMMY_PHASE_MASK 0x3 -+#define SPIUSER_DUMMY_PHASE_OFFSET 14 -+#define SPIUSER_DATA_PHASE_MASK 0x3 -+#define SPIUSER_DATA_PHASE_OFFSET 12 -+#define SPIUSER_DATA_READ (BIT(0) << SPIUSER_DATA_PHASE_OFFSET) -+#define SPIUSER_DATA_WRITE (BIT(1) << SPIUSER_DATA_PHASE_OFFSET) -+#define SPIUSER_ADDR_TYPE_OFFSET 9 -+#define SPIUSER_MODE_TYPE_OFFSET 6 -+#define SPIUSER_DUMMY_TYPE_OFFSET 3 -+#define SPIUSER_DATA_TYPE_OFFSET 0 -+#define SPIUSER_TRANSFER_MASK 0x7 -+#define SPIUSER_TRANSFER_SINGLE BIT(0) -+#define SPIUSER_TRANSFER_DUAL BIT(1) -+#define SPIUSER_TRANSFER_QUAD BIT(2) -+ -+#define SPIUSER_TRANSFER_TYPE(type) ( \ -+ (type << SPIUSER_ADDR_TYPE_OFFSET) | \ -+ (type << SPIUSER_MODE_TYPE_OFFSET) | \ -+ (type << SPIUSER_DUMMY_TYPE_OFFSET) | \ -+ (type << SPIUSER_DATA_TYPE_OFFSET) \ -+) -+ -+/* SPIFIFOSTAT register bit field */ -+#define SPIFIFOSTAT_TXEMPTY BIT(19) -+#define SPIFIFOSTAT_RXEMPTY BIT(18) -+#define SPIFIFOSTAT_TXFULL BIT(17) -+#define SPIFIFOSTAT_RXFULL BIT(16) -+#define SPIFIFOSTAT_FIFO_MASK 0xff -+#define SPIFIFOSTAT_TX_OFFSET 8 -+#define SPIFIFOSTAT_RX_OFFSET 0 -+ -+#define SPI_FIFO_DEPTH 16 -+ -+/* SPIMODE register bit field */ -+#define SPIMODE_MODE_OFFSET 24 -+#define SPIMODE_DUMMY_OFFSET 0 -+ -+/* SPIARB register bit field */ -+#define SPICTL_ARB_EN BIT(31) -+#define SPICTL_CSCTL1 BIT(16) -+#define SPI1_POR BIT(1) -+#define SPI0_POR BIT(0) -+ -+#define RT2880_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | \ -+ SPI_CS_HIGH) -+ -+static atomic_t hw_reset_count = ATOMIC_INIT(0); -+ -+struct rt2880_spi { -+ struct spi_master *master; -+ void __iomem *base; -+ u32 speed; -+ u16 wait_loops; -+ u16 mode; -+ struct clk *clk; -+}; -+ -+static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi) -+{ -+ return spi_master_get_devdata(spi->master); -+} -+ -+static inline u32 rt2880_spi_read(struct rt2880_spi *rs, u32 reg) -+{ -+ return ioread32(rs->base + reg); -+} -+ -+static inline void rt2880_spi_write(struct rt2880_spi *rs, u32 reg, -+ const u32 val) -+{ -+ iowrite32(val, rs->base + reg); -+} -+ -+static inline void rt2880_spi_setbits(struct rt2880_spi *rs, u32 reg, u32 mask) -+{ -+ void __iomem *addr = rs->base + reg; -+ -+ iowrite32((ioread32(addr) | mask), addr); -+} -+ -+static inline void rt2880_spi_clrbits(struct rt2880_spi *rs, u32 reg, u32 mask) -+{ -+ void __iomem *addr = rs->base + reg; -+ -+ iowrite32((ioread32(addr) & ~mask), addr); -+} -+ -+static u32 rt2880_spi_baudrate_get(struct spi_device *spi, unsigned int speed) -+{ -+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); -+ u32 rate; -+ u32 prescale; -+ -+ /* -+ * the supported rates are: 2, 4, 8, ... 128 -+ * round up as we look for equal or less speed -+ */ -+ rate = DIV_ROUND_UP(clk_get_rate(rs->clk), speed); -+ rate = roundup_pow_of_two(rate); -+ -+ /* Convert the rate to SPI clock divisor value. */ -+ prescale = ilog2(rate / 2); -+ -+ /* some tolerance. double and add 100 */ -+ rs->wait_loops = (8 * HZ * loops_per_jiffy) / -+ (clk_get_rate(rs->clk) / rate); -+ rs->wait_loops = (rs->wait_loops << 1) + 100; -+ rs->speed = speed; -+ -+ dev_dbg(&spi->dev, "speed: %lu/%u, rate: %u, prescal: %u, loops: %hu\n", -+ clk_get_rate(rs->clk) / rate, speed, rate, prescale, -+ rs->wait_loops); -+ -+ return prescale; -+} -+ -+static u32 get_arbiter_offset(struct spi_master *master) -+{ -+ u32 offset; -+ -+ offset = RAMIPS_SPI_ARBITER; -+ if (master->bus_num == 1) -+ offset -= RAMIPS_SPI_DEV_OFFSET; -+ -+ return offset; -+} -+ -+static void rt2880_spi_set_cs(struct spi_device *spi, bool enable) -+{ -+ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); -+ -+ if (enable) -+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA); -+ else -+ rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA); -+} -+ -+static int rt2880_spi_wait_ready(struct rt2880_spi *rs, int len) -+{ -+ int loop = rs->wait_loops * len; -+ -+ while ((rt2880_spi_read(rs, RAMIPS_SPI_STAT) & SPISTAT_BUSY) && --loop) -+ cpu_relax(); -+ -+ if (loop) -+ return 0; -+ -+ return -ETIMEDOUT; -+} -+ -+static void rt2880_dump_reg(struct spi_master *master) -+{ -+ struct rt2880_spi *rs = spi_master_get_devdata(master); -+ -+ dev_dbg(&master->dev, "stat: %08x, cfg: %08x, ctl: %08x, " \ -+ "data: %08x, arb: %08x\n", -+ rt2880_spi_read(rs, RAMIPS_SPI_STAT), -+ rt2880_spi_read(rs, RAMIPS_SPI_CFG), -+ rt2880_spi_read(rs, RAMIPS_SPI_CTL), -+ rt2880_spi_read(rs, RAMIPS_SPI_DATA), -+ rt2880_spi_read(rs, get_arbiter_offset(master))); -+} -+ -+static int rt2880_spi_transfer_one(struct spi_master *master, -+ struct spi_device *spi, struct spi_transfer *xfer) -+{ -+ struct rt2880_spi *rs = spi_master_get_devdata(master); -+ unsigned len; -+ const u8 *tx = xfer->tx_buf; -+ u8 *rx = xfer->rx_buf; -+ int err = 0; -+ -+ /* change clock speed */ -+ if (unlikely(rs->speed != xfer->speed_hz)) { -+ u32 reg; -+ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG); -+ reg &= ~SPICFG_SPICLK_PRESCALE_MASK; -+ reg |= rt2880_spi_baudrate_get(spi, xfer->speed_hz); -+ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg); -+ } -+ -+ if (tx) { -+ len = xfer->len; -+ while (len-- > 0) { -+ rt2880_spi_write(rs, RAMIPS_SPI_DATA, *tx++); -+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR); -+ err = rt2880_spi_wait_ready(rs, 1); -+ if (err) { -+ dev_err(&spi->dev, "TX failed, err=%d\n", err); -+ goto out; -+ } -+ } -+ } -+ -+ if (rx) { -+ len = xfer->len; -+ while (len-- > 0) { -+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD); -+ err = rt2880_spi_wait_ready(rs, 1); -+ if (err) { -+ dev_err(&spi->dev, "RX failed, err=%d\n", err); -+ goto out; -+ } -+ *rx++ = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA); -+ } -+ } -+ -+out: -+ return err; -+} -+ -+/* copy from spi.c */ -+static void spi_set_cs(struct spi_device *spi, bool enable) -+{ -+ if (spi->mode & SPI_CS_HIGH) -+ enable = !enable; -+ -+ if (spi->cs_gpio >= 0) -+ gpio_set_value(spi->cs_gpio, !enable); -+ else if (spi->master->set_cs) -+ spi->master->set_cs(spi, !enable); -+} -+ -+static int rt2880_spi_setup(struct spi_device *spi) -+{ -+ struct spi_master *master = spi->master; -+ struct rt2880_spi *rs = spi_master_get_devdata(master); -+ u32 reg, old_reg, arbit_off; -+ -+ if ((spi->max_speed_hz > master->max_speed_hz) || -+ (spi->max_speed_hz < master->min_speed_hz)) { -+ dev_err(&spi->dev, "invalide requested speed %d Hz\n", -+ spi->max_speed_hz); -+ return -EINVAL; -+ } -+ -+ if (!(master->bits_per_word_mask & -+ BIT(spi->bits_per_word - 1))) { -+ dev_err(&spi->dev, "invalide bits_per_word %d\n", -+ spi->bits_per_word); -+ return -EINVAL; -+ } -+ -+ /* the hardware seems can't work on mode0 force it to mode3 */ -+ if ((spi->mode & (SPI_CPOL | SPI_CPHA)) == SPI_MODE_0) { -+ dev_warn(&spi->dev, "force spi mode3\n"); -+ spi->mode |= SPI_MODE_3; -+ } -+ -+ /* chip polarity */ -+ arbit_off = get_arbiter_offset(master); -+ reg = old_reg = rt2880_spi_read(rs, arbit_off); -+ if (spi->mode & SPI_CS_HIGH) { -+ switch (master->bus_num) { -+ case 1: -+ reg |= SPI1_POR; -+ break; -+ default: -+ reg |= SPI0_POR; -+ break; -+ } -+ } else { -+ switch (master->bus_num) { -+ case 1: -+ reg &= ~SPI1_POR; -+ break; -+ default: -+ reg &= ~SPI0_POR; -+ break; -+ } -+ } -+ -+ /* enable spi1 */ -+ if (master->bus_num == 1) -+ reg |= SPICTL_ARB_EN; -+ -+ if (reg != old_reg) -+ rt2880_spi_write(rs, arbit_off, reg); -+ -+ /* deselected the spi device */ -+ spi_set_cs(spi, false); -+ -+ rt2880_dump_reg(master); -+ -+ return 0; -+} -+ -+static int rt2880_spi_prepare_message(struct spi_master *master, -+ struct spi_message *msg) -+{ -+ struct rt2880_spi *rs = spi_master_get_devdata(master); -+ struct spi_device *spi = msg->spi; -+ u32 reg; -+ -+ if ((rs->mode == spi->mode) && (rs->speed == spi->max_speed_hz)) -+ return 0; -+ -+#if 0 -+ /* set spido to tri-state */ -+ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO); -+#endif -+ -+ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG); -+ -+ reg &= ~(SPICFG_MSBFIRST | SPICFG_SPICLKPOL | -+ SPICFG_RXCLKEDGE_FALLING | -+ SPICFG_TXCLKEDGE_FALLING | -+ SPICFG_SPICLK_PRESCALE_MASK); -+ -+ /* MSB */ -+ if (!(spi->mode & SPI_LSB_FIRST)) -+ reg |= SPICFG_MSBFIRST; -+ -+ /* spi mode */ -+ switch (spi->mode & (SPI_CPOL | SPI_CPHA)) { -+ case SPI_MODE_0: -+ reg |= SPICFG_TXCLKEDGE_FALLING; -+ break; -+ case SPI_MODE_1: -+ reg |= SPICFG_RXCLKEDGE_FALLING; -+ break; -+ case SPI_MODE_2: -+ reg |= SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING; -+ break; -+ case SPI_MODE_3: -+ reg |= SPICFG_SPICLKPOL | SPICFG_TXCLKEDGE_FALLING; -+ break; -+ } -+ rs->mode = spi->mode; -+ -+#if 0 -+ /* set spiclk and spiena to tri-state */ -+ reg |= SPICFG_HIZSPI; -+#endif -+ -+ /* clock divide */ -+ reg |= rt2880_spi_baudrate_get(spi, spi->max_speed_hz); -+ -+ rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg); -+ -+ return 0; -+} -+ -+static int rt2880_spi_probe(struct platform_device *pdev) -+{ -+ struct spi_master *master; -+ struct rt2880_spi *rs; -+ void __iomem *base; -+ struct resource *r; -+ struct clk *clk; -+ int ret; -+ -+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ base = devm_ioremap_resource(&pdev->dev, r); -+ if (IS_ERR(base)) -+ return PTR_ERR(base); -+ -+ clk = devm_clk_get(&pdev->dev, NULL); -+ if (IS_ERR(clk)) { -+ dev_err(&pdev->dev, "unable to get SYS clock\n"); -+ return PTR_ERR(clk); -+ } -+ -+ ret = clk_prepare_enable(clk); -+ if (ret) -+ goto err_clk; -+ -+ master = spi_alloc_master(&pdev->dev, sizeof(*rs)); -+ if (master == NULL) { -+ dev_dbg(&pdev->dev, "master allocation failed\n"); -+ ret = -ENOMEM; -+ goto err_clk; -+ } -+ -+ master->dev.of_node = pdev->dev.of_node; -+ master->mode_bits = RT2880_SPI_MODE_BITS; -+ master->bits_per_word_mask = SPI_BPW_MASK(8); -+ master->min_speed_hz = clk_get_rate(clk) / 128; -+ master->max_speed_hz = clk_get_rate(clk) / 2; -+ master->flags = SPI_MASTER_HALF_DUPLEX; -+ master->setup = rt2880_spi_setup; -+ master->prepare_message = rt2880_spi_prepare_message; -+ master->set_cs = rt2880_spi_set_cs; -+ master->transfer_one = rt2880_spi_transfer_one, -+ -+ dev_set_drvdata(&pdev->dev, master); -+ -+ rs = spi_master_get_devdata(master); -+ rs->master = master; -+ rs->base = base; -+ rs->clk = clk; -+ -+ if (atomic_inc_return(&hw_reset_count) == 1) -+ device_reset(&pdev->dev); -+ -+ ret = devm_spi_register_master(&pdev->dev, master); -+ if (ret < 0) { -+ dev_err(&pdev->dev, "devm_spi_register_master error.\n"); -+ goto err_master; -+ } -+ -+ return ret; -+ -+err_master: -+ spi_master_put(master); -+ kfree(master); -+err_clk: -+ clk_disable_unprepare(clk); -+ -+ return ret; -+} -+ -+static int rt2880_spi_remove(struct platform_device *pdev) -+{ -+ struct spi_master *master; -+ struct rt2880_spi *rs; -+ -+ master = dev_get_drvdata(&pdev->dev); -+ rs = spi_master_get_devdata(master); -+ -+ clk_disable_unprepare(rs->clk); -+ atomic_dec(&hw_reset_count); -+ -+ return 0; -+} -+ -+MODULE_ALIAS("platform:" DRIVER_NAME); -+ -+static const struct of_device_id rt2880_spi_match[] = { -+ { .compatible = "ralink,rt2880-spi" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, rt2880_spi_match); -+ -+static struct platform_driver rt2880_spi_driver = { -+ .driver = { -+ .name = DRIVER_NAME, -+ .owner = THIS_MODULE, -+ .of_match_table = rt2880_spi_match, -+ }, -+ .probe = rt2880_spi_probe, -+ .remove = rt2880_spi_remove, -+}; -+ -+module_platform_driver(rt2880_spi_driver); -+ -+MODULE_DESCRIPTION("Ralink SPI driver"); -+MODULE_AUTHOR("Sergiy "); -+MODULE_AUTHOR("Gabor Juhos "); -+MODULE_LICENSE("GPL"); diff --git a/target/linux/ramips/patches-5.10/825-i2c-MIPS-adds-ralink-I2C-driver.patch b/target/linux/ramips/patches-5.10/825-i2c-MIPS-adds-ralink-I2C-driver.patch deleted file mode 100644 index 7fdbceac094f..000000000000 --- a/target/linux/ramips/patches-5.10/825-i2c-MIPS-adds-ralink-I2C-driver.patch +++ /dev/null @@ -1,507 +0,0 @@ -From 723b8beaabf3c3c4b1ce69480141f1e926f3f3b2 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Sun, 27 Jul 2014 09:52:56 +0100 -Subject: [PATCH 44/53] i2c: MIPS: adds ralink I2C driver - -Signed-off-by: John Crispin ---- - .../devicetree/bindings/i2c/i2c-ralink.txt | 27 ++ - drivers/i2c/busses/Kconfig | 4 + - drivers/i2c/busses/Makefile | 1 + - drivers/i2c/busses/i2c-ralink.c | 327 ++++++++++++++++++++ - 4 files changed, 359 insertions(+) - create mode 100644 Documentation/devicetree/bindings/i2c/i2c-ralink.txt - create mode 100644 drivers/i2c/busses/i2c-ralink.c - ---- /dev/null -+++ b/Documentation/devicetree/bindings/i2c/i2c-ralink.txt -@@ -0,0 +1,27 @@ -+I2C for Ralink platforms -+ -+Required properties : -+- compatible : Must be "link,rt3052-i2c" -+- reg: physical base address of the controller and length of memory mapped -+ region. -+- #address-cells = <1>; -+- #size-cells = <0>; -+ -+Optional properties: -+- Child nodes conforming to i2c bus binding -+ -+Example : -+ -+palmbus@10000000 { -+ i2c@900 { -+ compatible = "link,rt3052-i2c"; -+ reg = <0x900 0x100>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ hwmon@4b { -+ compatible = "national,lm92"; -+ reg = <0x4b>; -+ }; -+ }; -+}; ---- a/drivers/i2c/busses/Kconfig -+++ b/drivers/i2c/busses/Kconfig -@@ -954,6 +954,11 @@ config I2C_RK3X - This driver can also be built as a module. If so, the module will - be called i2c-rk3x. - -+config I2C_RALINK -+ tristate "Ralink I2C Controller" -+ depends on RALINK && !SOC_MT7621 -+ select OF_I2C -+ - config HAVE_S3C2410_I2C - bool - help ---- a/drivers/i2c/busses/Makefile -+++ b/drivers/i2c/busses/Makefile -@@ -90,6 +90,7 @@ obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o - obj-$(CONFIG_I2C_PNX) += i2c-pnx.o - obj-$(CONFIG_I2C_PXA) += i2c-pxa.o - obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o -+obj-$(CONFIG_I2C_RALINK) += i2c-ralink.o - obj-$(CONFIG_I2C_QCOM_CCI) += i2c-qcom-cci.o - obj-$(CONFIG_I2C_QCOM_GENI) += i2c-qcom-geni.o - obj-$(CONFIG_I2C_QUP) += i2c-qup.o ---- /dev/null -+++ b/drivers/i2c/busses/i2c-ralink.c -@@ -0,0 +1,435 @@ -+/* -+ * drivers/i2c/busses/i2c-ralink.c -+ * -+ * Copyright (C) 2013 Steven Liu -+ * Copyright (C) 2016 Michael Lee -+ * -+ * Improve driver for i2cdetect from i2c-tools to detect i2c devices on the bus. -+ * (C) 2014 Sittisak -+ * -+ * This software is licensed under the terms of the GNU General Public -+ * License version 2, as published by the Free Software Foundation, and -+ * may be copied, distributed, and modified under those terms. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define REG_CONFIG_REG 0x00 -+#define REG_CLKDIV_REG 0x04 -+#define REG_DEVADDR_REG 0x08 -+#define REG_ADDR_REG 0x0C -+#define REG_DATAOUT_REG 0x10 -+#define REG_DATAIN_REG 0x14 -+#define REG_STATUS_REG 0x18 -+#define REG_STARTXFR_REG 0x1C -+#define REG_BYTECNT_REG 0x20 -+ -+/* REG_CONFIG_REG */ -+#define I2C_ADDRLEN_OFFSET 5 -+#define I2C_DEVADLEN_OFFSET 2 -+#define I2C_ADDRLEN_MASK 0x3 -+#define I2C_ADDR_DIS BIT(1) -+#define I2C_DEVADDR_DIS BIT(0) -+#define I2C_ADDRLEN_8 (7 << I2C_ADDRLEN_OFFSET) -+#define I2C_DEVADLEN_7 (6 << I2C_DEVADLEN_OFFSET) -+#define I2C_CONF_DEFAULT (I2C_ADDRLEN_8 | I2C_DEVADLEN_7) -+ -+/* REG_CLKDIV_REG */ -+#define I2C_CLKDIV_MASK 0xffff -+ -+/* REG_DEVADDR_REG */ -+#define I2C_DEVADDR_MASK 0x7f -+ -+/* REG_ADDR_REG */ -+#define I2C_ADDR_MASK 0xff -+ -+/* REG_STATUS_REG */ -+#define I2C_STARTERR BIT(4) -+#define I2C_ACKERR BIT(3) -+#define I2C_DATARDY BIT(2) -+#define I2C_SDOEMPTY BIT(1) -+#define I2C_BUSY BIT(0) -+ -+/* REG_STARTXFR_REG */ -+#define NOSTOP_CMD BIT(2) -+#define NODATA_CMD BIT(1) -+#define READ_CMD BIT(0) -+ -+/* REG_BYTECNT_REG */ -+#define BYTECNT_MAX 64 -+#define SET_BYTECNT(x) (x - 1) -+ -+/* timeout waiting for I2C devices to respond (clock streching) */ -+#define TIMEOUT_MS 1000 -+#define DELAY_INTERVAL_US 100 -+ -+struct rt_i2c { -+ void __iomem *base; -+ struct clk *clk; -+ struct device *dev; -+ struct i2c_adapter adap; -+ u32 cur_clk; -+ u32 clk_div; -+ u32 flags; -+}; -+ -+static void rt_i2c_w32(struct rt_i2c *i2c, u32 val, unsigned reg) -+{ -+ iowrite32(val, i2c->base + reg); -+} -+ -+static u32 rt_i2c_r32(struct rt_i2c *i2c, unsigned reg) -+{ -+ return ioread32(i2c->base + reg); -+} -+ -+static int poll_down_timeout(void __iomem *addr, u32 mask) -+{ -+ unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS); -+ -+ do { -+ if (!(readl_relaxed(addr) & mask)) -+ return 0; -+ -+ usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50); -+ } while (time_before(jiffies, timeout)); -+ -+ return (readl_relaxed(addr) & mask) ? -EAGAIN : 0; -+} -+ -+static int rt_i2c_wait_idle(struct rt_i2c *i2c) -+{ -+ int ret; -+ -+ ret = poll_down_timeout(i2c->base + REG_STATUS_REG, I2C_BUSY); -+ if (ret < 0) -+ dev_dbg(i2c->dev, "idle err(%d)\n", ret); -+ -+ return ret; -+} -+ -+static int poll_up_timeout(void __iomem *addr, u32 mask) -+{ -+ unsigned long timeout = jiffies + msecs_to_jiffies(TIMEOUT_MS); -+ u32 status; -+ -+ do { -+ status = readl_relaxed(addr); -+ -+ /* check error status */ -+ if (status & I2C_STARTERR) -+ return -EAGAIN; -+ else if (status & I2C_ACKERR) -+ return -ENXIO; -+ else if (status & mask) -+ return 0; -+ -+ usleep_range(DELAY_INTERVAL_US, DELAY_INTERVAL_US + 50); -+ } while (time_before(jiffies, timeout)); -+ -+ return -ETIMEDOUT; -+} -+ -+static int rt_i2c_wait_rx_done(struct rt_i2c *i2c) -+{ -+ int ret; -+ -+ ret = poll_up_timeout(i2c->base + REG_STATUS_REG, I2C_DATARDY); -+ if (ret < 0) -+ dev_dbg(i2c->dev, "rx err(%d)\n", ret); -+ -+ return ret; -+} -+ -+static int rt_i2c_wait_tx_done(struct rt_i2c *i2c) -+{ -+ int ret; -+ -+ ret = poll_up_timeout(i2c->base + REG_STATUS_REG, I2C_SDOEMPTY); -+ if (ret < 0) -+ dev_dbg(i2c->dev, "tx err(%d)\n", ret); -+ -+ return ret; -+} -+ -+static void rt_i2c_reset(struct rt_i2c *i2c) -+{ -+ device_reset(i2c->adap.dev.parent); -+ barrier(); -+ rt_i2c_w32(i2c, i2c->clk_div, REG_CLKDIV_REG); -+} -+ -+static void rt_i2c_dump_reg(struct rt_i2c *i2c) -+{ -+ dev_dbg(i2c->dev, "conf %08x, clkdiv %08x, devaddr %08x, " \ -+ "addr %08x, dataout %08x, datain %08x, " \ -+ "status %08x, startxfr %08x, bytecnt %08x\n", -+ rt_i2c_r32(i2c, REG_CONFIG_REG), -+ rt_i2c_r32(i2c, REG_CLKDIV_REG), -+ rt_i2c_r32(i2c, REG_DEVADDR_REG), -+ rt_i2c_r32(i2c, REG_ADDR_REG), -+ rt_i2c_r32(i2c, REG_DATAOUT_REG), -+ rt_i2c_r32(i2c, REG_DATAIN_REG), -+ rt_i2c_r32(i2c, REG_STATUS_REG), -+ rt_i2c_r32(i2c, REG_STARTXFR_REG), -+ rt_i2c_r32(i2c, REG_BYTECNT_REG)); -+} -+ -+static int rt_i2c_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, -+ int num) -+{ -+ struct rt_i2c *i2c; -+ struct i2c_msg *pmsg; -+ unsigned char addr; -+ int i, j, ret; -+ u32 cmd; -+ -+ i2c = i2c_get_adapdata(adap); -+ -+ for (i = 0; i < num; i++) { -+ pmsg = &msgs[i]; -+ if (i == (num - 1)) -+ cmd = 0; -+ else -+ cmd = NOSTOP_CMD; -+ -+ dev_dbg(i2c->dev, "addr: 0x%x, len: %d, flags: 0x%x, stop: %d\n", -+ pmsg->addr, pmsg->len, pmsg->flags, -+ (cmd == 0)? 1 : 0); -+ -+ /* wait hardware idle */ -+ if ((ret = rt_i2c_wait_idle(i2c))) -+ goto err_timeout; -+ -+ if (pmsg->flags & I2C_M_TEN) { -+ rt_i2c_w32(i2c, I2C_CONF_DEFAULT, REG_CONFIG_REG); -+ /* 10 bits address */ -+ addr = 0x78 | ((pmsg->addr >> 8) & 0x03); -+ rt_i2c_w32(i2c, addr & I2C_DEVADDR_MASK, -+ REG_DEVADDR_REG); -+ rt_i2c_w32(i2c, pmsg->addr & I2C_ADDR_MASK, -+ REG_ADDR_REG); -+ } else { -+ rt_i2c_w32(i2c, I2C_CONF_DEFAULT | I2C_ADDR_DIS, -+ REG_CONFIG_REG); -+ /* 7 bits address */ -+ rt_i2c_w32(i2c, pmsg->addr & I2C_DEVADDR_MASK, -+ REG_DEVADDR_REG); -+ } -+ -+ /* buffer length */ -+ if (pmsg->len == 0) -+ cmd |= NODATA_CMD; -+ else -+ rt_i2c_w32(i2c, SET_BYTECNT(pmsg->len), -+ REG_BYTECNT_REG); -+ -+ j = 0; -+ if (pmsg->flags & I2C_M_RD) { -+ cmd |= READ_CMD; -+ /* start transfer */ -+ barrier(); -+ rt_i2c_w32(i2c, cmd, REG_STARTXFR_REG); -+ do { -+ /* wait */ -+ if ((ret = rt_i2c_wait_rx_done(i2c))) -+ goto err_timeout; -+ /* read data */ -+ if (pmsg->len) -+ pmsg->buf[j] = rt_i2c_r32(i2c, -+ REG_DATAIN_REG); -+ j++; -+ } while (j < pmsg->len); -+ } else { -+ do { -+ /* write data */ -+ if (pmsg->len) -+ rt_i2c_w32(i2c, pmsg->buf[j], -+ REG_DATAOUT_REG); -+ /* start transfer */ -+ if (j == 0) { -+ barrier(); -+ rt_i2c_w32(i2c, cmd, REG_STARTXFR_REG); -+ } -+ /* wait */ -+ if ((ret = rt_i2c_wait_tx_done(i2c))) -+ goto err_timeout; -+ j++; -+ } while (j < pmsg->len); -+ } -+ } -+ /* the return value is number of executed messages */ -+ ret = i; -+ -+ return ret; -+ -+err_timeout: -+ rt_i2c_dump_reg(i2c); -+ rt_i2c_reset(i2c); -+ return ret; -+} -+ -+static u32 rt_i2c_func(struct i2c_adapter *a) -+{ -+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; -+} -+ -+static const struct i2c_algorithm rt_i2c_algo = { -+ .master_xfer = rt_i2c_master_xfer, -+ .functionality = rt_i2c_func, -+}; -+ -+static const struct of_device_id i2c_rt_dt_ids[] = { -+ { .compatible = "ralink,rt2880-i2c" }, -+ { /* sentinel */ } -+}; -+ -+MODULE_DEVICE_TABLE(of, i2c_rt_dt_ids); -+ -+static struct i2c_adapter_quirks rt_i2c_quirks = { -+ .max_write_len = BYTECNT_MAX, -+ .max_read_len = BYTECNT_MAX, -+}; -+ -+static int rt_i2c_init(struct rt_i2c *i2c) -+{ -+ u32 reg; -+ -+ /* i2c_sclk = periph_clk / ((2 * clk_div) + 5) */ -+ i2c->clk_div = (clk_get_rate(i2c->clk) - (5 * i2c->cur_clk)) / -+ (2 * i2c->cur_clk); -+ if (i2c->clk_div < 8) -+ i2c->clk_div = 8; -+ if (i2c->clk_div > I2C_CLKDIV_MASK) -+ i2c->clk_div = I2C_CLKDIV_MASK; -+ -+ /* check support combinde/repeated start message */ -+ rt_i2c_w32(i2c, NOSTOP_CMD, REG_STARTXFR_REG); -+ reg = rt_i2c_r32(i2c, REG_STARTXFR_REG) & NOSTOP_CMD; -+ -+ rt_i2c_reset(i2c); -+ -+ return reg; -+} -+ -+static int rt_i2c_probe(struct platform_device *pdev) -+{ -+ struct resource *res; -+ struct rt_i2c *i2c; -+ struct i2c_adapter *adap; -+ const struct of_device_id *match; -+ int ret, restart; -+ -+ match = of_match_device(i2c_rt_dt_ids, &pdev->dev); -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!res) { -+ dev_err(&pdev->dev, "no memory resource found\n"); -+ return -ENODEV; -+ } -+ -+ i2c = devm_kzalloc(&pdev->dev, sizeof(struct rt_i2c), GFP_KERNEL); -+ if (!i2c) { -+ dev_err(&pdev->dev, "failed to allocate i2c_adapter\n"); -+ return -ENOMEM; -+ } -+ -+ i2c->base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(i2c->base)) -+ return PTR_ERR(i2c->base); -+ -+ i2c->clk = devm_clk_get(&pdev->dev, NULL); -+ if (IS_ERR(i2c->clk)) { -+ dev_err(&pdev->dev, "no clock defined\n"); -+ return -ENODEV; -+ } -+ clk_prepare_enable(i2c->clk); -+ i2c->dev = &pdev->dev; -+ -+ if (of_property_read_u32(pdev->dev.of_node, -+ "clock-frequency", &i2c->cur_clk)) -+ i2c->cur_clk = 100000; -+ -+ adap = &i2c->adap; -+ adap->owner = THIS_MODULE; -+ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; -+ adap->algo = &rt_i2c_algo; -+ adap->retries = 3; -+ adap->dev.parent = &pdev->dev; -+ i2c_set_adapdata(adap, i2c); -+ adap->dev.of_node = pdev->dev.of_node; -+ strlcpy(adap->name, dev_name(&pdev->dev), sizeof(adap->name)); -+ adap->quirks = &rt_i2c_quirks; -+ -+ platform_set_drvdata(pdev, i2c); -+ -+ restart = rt_i2c_init(i2c); -+ -+ ret = i2c_add_adapter(adap); -+ if (ret < 0) { -+ dev_err(&pdev->dev, "failed to add adapter\n"); -+ clk_disable_unprepare(i2c->clk); -+ return ret; -+ } -+ -+ dev_info(&pdev->dev, "clock %uKHz, re-start %ssupport\n", -+ i2c->cur_clk/1000, restart ? "" : "not "); -+ -+ return ret; -+} -+ -+static int rt_i2c_remove(struct platform_device *pdev) -+{ -+ struct rt_i2c *i2c = platform_get_drvdata(pdev); -+ -+ i2c_del_adapter(&i2c->adap); -+ clk_disable_unprepare(i2c->clk); -+ -+ return 0; -+} -+ -+static struct platform_driver rt_i2c_driver = { -+ .probe = rt_i2c_probe, -+ .remove = rt_i2c_remove, -+ .driver = { -+ .owner = THIS_MODULE, -+ .name = "i2c-ralink", -+ .of_match_table = i2c_rt_dt_ids, -+ }, -+}; -+ -+static int __init i2c_rt_init (void) -+{ -+ return platform_driver_register(&rt_i2c_driver); -+} -+subsys_initcall(i2c_rt_init); -+ -+static void __exit i2c_rt_exit (void) -+{ -+ platform_driver_unregister(&rt_i2c_driver); -+} -+module_exit(i2c_rt_exit); -+ -+MODULE_AUTHOR("Steven Liu "); -+MODULE_DESCRIPTION("Ralink I2c host driver"); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS("platform:Ralink-I2C"); diff --git a/target/linux/ramips/patches-5.10/830-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch b/target/linux/ramips/patches-5.10/830-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch deleted file mode 100644 index 77311c36de25..000000000000 --- a/target/linux/ramips/patches-5.10/830-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 23147af14531cbdada194b94120ef8774f46292d Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Thu, 13 Nov 2014 19:08:40 +0100 -Subject: [PATCH 46/53] mmc: MIPS: ralink: add sdhci for mt7620a SoC - -Signed-off-by: John Crispin ---- - drivers/mmc/host/Kconfig | 2 + - drivers/mmc/host/Makefile | 1 + - drivers/mmc/host/mtk-mmc/Kconfig | 16 + - drivers/mmc/host/mtk-mmc/Makefile | 42 + - drivers/mmc/host/mtk-mmc/board.h | 137 ++ - drivers/mmc/host/mtk-mmc/dbg.c | 347 ++++ - drivers/mmc/host/mtk-mmc/dbg.h | 156 ++ - drivers/mmc/host/mtk-mmc/mt6575_sd.h | 1001 +++++++++++ - drivers/mmc/host/mtk-mmc/sd.c | 3060 ++++++++++++++++++++++++++++++++++ - 9 files changed, 4762 insertions(+) - create mode 100644 drivers/mmc/host/mtk-mmc/Kconfig - create mode 100644 drivers/mmc/host/mtk-mmc/Makefile - create mode 100644 drivers/mmc/host/mtk-mmc/board.h - create mode 100644 drivers/mmc/host/mtk-mmc/dbg.c - create mode 100644 drivers/mmc/host/mtk-mmc/dbg.h - create mode 100644 drivers/mmc/host/mtk-mmc/mt6575_sd.h - create mode 100644 drivers/mmc/host/mtk-mmc/sd.c - ---- a/drivers/mmc/host/Kconfig -+++ b/drivers/mmc/host/Kconfig -@@ -1101,3 +1101,5 @@ config MMC_OWL - - config MMC_SDHCI_EXTERNAL_DMA - bool -+ -+source "drivers/mmc/host/mtk-mmc/Kconfig" ---- a/drivers/mmc/host/Makefile -+++ b/drivers/mmc/host/Makefile -@@ -3,6 +3,7 @@ - # Makefile for MMC/SD host controller drivers - # - -+obj-$(CONFIG_MTK_MMC) += mtk-mmc/ - obj-$(CONFIG_MMC_ARMMMCI) += armmmci.o - armmmci-y := mmci.o - armmmci-$(CONFIG_MMC_QCOM_DML) += mmci_qcom_dml.o diff --git a/target/linux/ramips/patches-5.10/835-asoc-add-mt7620-support.patch b/target/linux/ramips/patches-5.10/835-asoc-add-mt7620-support.patch deleted file mode 100644 index f625d4144943..000000000000 --- a/target/linux/ramips/patches-5.10/835-asoc-add-mt7620-support.patch +++ /dev/null @@ -1,1046 +0,0 @@ -From 7f29222b1731e8182ba94a331531dec18865a1e4 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Sun, 27 Jul 2014 09:31:47 +0100 -Subject: [PATCH 48/53] asoc: add mt7620 support - -Signed-off-by: John Crispin ---- - arch/mips/ralink/of.c | 2 + - sound/soc/Kconfig | 1 + - sound/soc/Makefile | 1 + - sound/soc/ralink/Kconfig | 15 ++ - sound/soc/ralink/Makefile | 11 + - sound/soc/ralink/mt7620-i2s.c | 436 ++++++++++++++++++++++++++++++++++++++ - sound/soc/ralink/mt7620-wm8960.c | 233 ++++++++++++++++++++ - 7 files changed, 699 insertions(+) - create mode 100644 sound/soc/ralink/Kconfig - create mode 100644 sound/soc/ralink/Makefile - create mode 100644 sound/soc/ralink/mt7620-i2s.c - create mode 100644 sound/soc/ralink/mt7620-wm8960.c - ---- a/arch/mips/ralink/of.c -+++ b/arch/mips/ralink/of.c -@@ -13,6 +13,7 @@ - #include - #include - #include -+#include - #include - #include - -@@ -24,6 +25,7 @@ - #include "common.h" - - __iomem void *rt_sysc_membase; -+EXPORT_SYMBOL(rt_sysc_membase); - __iomem void *rt_memc_membase; - - __iomem void *plat_of_remap_node(const char *node) ---- a/sound/soc/Kconfig -+++ b/sound/soc/Kconfig -@@ -60,6 +60,7 @@ source "sound/soc/mxs/Kconfig" - source "sound/soc/pxa/Kconfig" - source "sound/soc/qcom/Kconfig" - source "sound/soc/rockchip/Kconfig" -+source "sound/soc/ralink/Kconfig" - source "sound/soc/samsung/Kconfig" - source "sound/soc/sh/Kconfig" - source "sound/soc/sirf/Kconfig" ---- a/sound/soc/Makefile -+++ b/sound/soc/Makefile -@@ -43,6 +43,7 @@ obj-$(CONFIG_SND_SOC) += kirkwood/ - obj-$(CONFIG_SND_SOC) += pxa/ - obj-$(CONFIG_SND_SOC) += qcom/ - obj-$(CONFIG_SND_SOC) += rockchip/ -+obj-$(CONFIG_SND_SOC) += ralink/ - obj-$(CONFIG_SND_SOC) += samsung/ - obj-$(CONFIG_SND_SOC) += sh/ - obj-$(CONFIG_SND_SOC) += sirf/ ---- /dev/null -+++ b/sound/soc/ralink/Kconfig -@@ -0,0 +1,8 @@ -+config SND_RALINK_SOC_I2S -+ depends on RALINK && SND_SOC && !SOC_RT288X -+ select SND_SOC_GENERIC_DMAENGINE_PCM -+ select REGMAP_MMIO -+ tristate "SoC Audio (I2S protocol) for Ralink SoC" -+ help -+ Say Y if you want to use I2S protocol and I2S codec on Ralink/MediaTek -+ based boards. ---- /dev/null -+++ b/sound/soc/ralink/Makefile -@@ -0,0 +1,6 @@ -+# -+# Ralink/MediaTek Platform Support -+# -+snd-soc-ralink-i2s-objs := ralink-i2s.o -+ -+obj-$(CONFIG_SND_RALINK_SOC_I2S) += snd-soc-ralink-i2s.o ---- /dev/null -+++ b/sound/soc/ralink/ralink-i2s.c -@@ -0,0 +1,965 @@ -+/* -+ * Copyright (C) 2010, Lars-Peter Clausen -+ * Copyright (C) 2016 Michael Lee -+ * -+ * This program is free software; you can redistribute it and/or modify it -+ * under the terms of the GNU General Public License as published by the -+ * Free Software Foundation; either version 2 of the License, or (at your -+ * option) any later version. -+ * -+ * You should have received a copy of the GNU General Public License along -+ * with this program; if not, write to the Free Software Foundation, Inc., -+ * 675 Mass Ave, Cambridge, MA 02139, USA. -+ * -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+ -+#define DRV_NAME "ralink-i2s" -+ -+#define I2S_REG_CFG0 0x00 -+#define I2S_REG_INT_STATUS 0x04 -+#define I2S_REG_INT_EN 0x08 -+#define I2S_REG_FF_STATUS 0x0c -+#define I2S_REG_WREG 0x10 -+#define I2S_REG_RREG 0x14 -+#define I2S_REG_CFG1 0x18 -+#define I2S_REG_DIVCMP 0x20 -+#define I2S_REG_DIVINT 0x24 -+ -+/* I2S_REG_CFG0 */ -+#define I2S_REG_CFG0_EN BIT(31) -+#define I2S_REG_CFG0_DMA_EN BIT(30) -+#define I2S_REG_CFG0_BYTE_SWAP BIT(28) -+#define I2S_REG_CFG0_TX_EN BIT(24) -+#define I2S_REG_CFG0_RX_EN BIT(20) -+#define I2S_REG_CFG0_SLAVE BIT(16) -+#define I2S_REG_CFG0_RX_THRES 12 -+#define I2S_REG_CFG0_TX_THRES 4 -+#define I2S_REG_CFG0_THRES_MASK (0xf << I2S_REG_CFG0_RX_THRES) | \ -+ (4 << I2S_REG_CFG0_TX_THRES) -+#define I2S_REG_CFG0_DFT_THRES (4 << I2S_REG_CFG0_RX_THRES) | \ -+ (4 << I2S_REG_CFG0_TX_THRES) -+/* RT305x */ -+#define I2S_REG_CFG0_CLK_DIS BIT(8) -+#define I2S_REG_CFG0_TXCH_SWAP BIT(3) -+#define I2S_REG_CFG0_TXCH1_OFF BIT(2) -+#define I2S_REG_CFG0_TXCH0_OFF BIT(1) -+#define I2S_REG_CFG0_SLAVE_EN BIT(0) -+/* RT3883 */ -+#define I2S_REG_CFG0_RXCH_SWAP BIT(11) -+#define I2S_REG_CFG0_RXCH1_OFF BIT(10) -+#define I2S_REG_CFG0_RXCH0_OFF BIT(9) -+#define I2S_REG_CFG0_WS_INV BIT(0) -+/* MT7628 */ -+#define I2S_REG_CFG0_FMT_LE BIT(29) -+#define I2S_REG_CFG0_SYS_BE BIT(28) -+#define I2S_REG_CFG0_NORM_24 BIT(18) -+#define I2S_REG_CFG0_DATA_24 BIT(17) -+ -+/* I2S_REG_INT_STATUS */ -+#define I2S_REG_INT_RX_FAULT BIT(7) -+#define I2S_REG_INT_RX_OVRUN BIT(6) -+#define I2S_REG_INT_RX_UNRUN BIT(5) -+#define I2S_REG_INT_RX_THRES BIT(4) -+#define I2S_REG_INT_TX_FAULT BIT(3) -+#define I2S_REG_INT_TX_OVRUN BIT(2) -+#define I2S_REG_INT_TX_UNRUN BIT(1) -+#define I2S_REG_INT_TX_THRES BIT(0) -+#define I2S_REG_INT_TX_MASK 0xf -+#define I2S_REG_INT_RX_MASK 0xf0 -+ -+/* I2S_REG_INT_STATUS */ -+#define I2S_RX_AVCNT(x) ((x >> 4) & 0xf) -+#define I2S_TX_AVCNT(x) (x & 0xf) -+/* MT7628 */ -+#define MT7628_I2S_RX_AVCNT(x) ((x >> 8) & 0x1f) -+#define MT7628_I2S_TX_AVCNT(x) (x & 0x1f) -+ -+/* I2S_REG_CFG1 */ -+#define I2S_REG_CFG1_LBK BIT(31) -+#define I2S_REG_CFG1_EXTLBK BIT(30) -+/* RT3883 */ -+#define I2S_REG_CFG1_LEFT_J BIT(0) -+#define I2S_REG_CFG1_RIGHT_J BIT(1) -+#define I2S_REG_CFG1_FMT_MASK 0x3 -+ -+/* I2S_REG_DIVCMP */ -+#define I2S_REG_DIVCMP_CLKEN BIT(31) -+#define I2S_REG_DIVCMP_DIVCOMP_MASK 0x1ff -+ -+/* I2S_REG_DIVINT */ -+#define I2S_REG_DIVINT_MASK 0x3ff -+ -+/* BCLK dividers */ -+#define RALINK_I2S_DIVCMP 0 -+#define RALINK_I2S_DIVINT 1 -+ -+/* FIFO */ -+#define RALINK_I2S_FIFO_SIZE 32 -+ -+/* feature flags */ -+#define RALINK_FLAGS_TXONLY BIT(0) -+#define RALINK_FLAGS_LEFT_J BIT(1) -+#define RALINK_FLAGS_RIGHT_J BIT(2) -+#define RALINK_FLAGS_ENDIAN BIT(3) -+#define RALINK_FLAGS_24BIT BIT(4) -+ -+#define RALINK_I2S_INT_EN 0 -+ -+struct ralink_i2s_stats { -+ u32 dmafault; -+ u32 overrun; -+ u32 underrun; -+ u32 belowthres; -+}; -+ -+struct ralink_i2s { -+ struct device *dev; -+ void __iomem *regs; -+ struct clk *clk; -+ struct regmap *regmap; -+ u32 flags; -+ unsigned int fmt; -+ u16 txdma_req; -+ u16 rxdma_req; -+ -+ struct snd_dmaengine_dai_dma_data playback_dma_data; -+ struct snd_dmaengine_dai_dma_data capture_dma_data; -+ -+ struct dentry *dbg_dir; -+ struct dentry *dbg_stats; -+ struct ralink_i2s_stats txstats; -+ struct ralink_i2s_stats rxstats; -+}; -+ -+static void ralink_i2s_dump_regs(struct ralink_i2s *i2s) -+{ -+ u32 buf[10]; -+ int ret; -+ -+ ret = regmap_bulk_read(i2s->regmap, I2S_REG_CFG0, -+ buf, ARRAY_SIZE(buf)); -+ -+ dev_dbg(i2s->dev, "CFG0: %08x, INTSTAT: %08x, INTEN: %08x, " \ -+ "FFSTAT: %08x, WREG: %08x, RREG: %08x, " \ -+ "CFG1: %08x, DIVCMP: %08x, DIVINT: %08x\n", -+ buf[0], buf[1], buf[2], buf[3], buf[4], -+ buf[5], buf[6], buf[8], buf[9]); -+} -+ -+static int ralink_i2s_set_sysclk(struct snd_soc_dai *dai, -+ int clk_id, unsigned int freq, int dir) -+{ -+ return 0; -+} -+ -+static int ralink_i2s_set_sys_bclk(struct snd_soc_dai *dai, int width, int rate) -+{ -+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai); -+ unsigned long clk = clk_get_rate(i2s->clk); -+ int div; -+ uint32_t data; -+ -+ /* disable clock at slave mode */ -+ if ((i2s->fmt & SND_SOC_DAIFMT_MASTER_MASK) == -+ SND_SOC_DAIFMT_CBM_CFM) { -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, -+ I2S_REG_CFG0_CLK_DIS, -+ I2S_REG_CFG0_CLK_DIS); -+ return 0; -+ } -+ -+ /* FREQOUT = FREQIN / (I2S_CLK_DIV + 1) */ -+ div = (clk / rate ) - 1; -+ -+ data = rt_sysc_r32(0x30); -+ data &= (0xff << 8); -+ data |= (0x1 << 15) | (div << 8); -+ rt_sysc_w32(data, 0x30); -+ -+ /* enable clock */ -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, I2S_REG_CFG0_CLK_DIS, 0); -+ -+ dev_dbg(i2s->dev, "clk: %lu, rate: %u, div: %d\n", -+ clk, rate, div); -+ -+ return 0; -+} -+ -+static int ralink_i2s_set_bclk(struct snd_soc_dai *dai, int width, int rate) -+{ -+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai); -+ unsigned long clk = clk_get_rate(i2s->clk); -+ int divint, divcomp; -+ -+ /* disable clock at slave mode */ -+ if ((i2s->fmt & SND_SOC_DAIFMT_MASTER_MASK) == -+ SND_SOC_DAIFMT_CBM_CFM) { -+ regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP, -+ I2S_REG_DIVCMP_CLKEN, 0); -+ return 0; -+ } -+ -+ /* FREQOUT = FREQIN * (1/2) * (1/(DIVINT + DIVCOMP/512)) */ -+ clk = clk / (2 * 2 * width); -+ divint = clk / rate; -+ divcomp = ((clk % rate) * 512) / rate; -+ -+ if ((divint > I2S_REG_DIVINT_MASK) || -+ (divcomp > I2S_REG_DIVCMP_DIVCOMP_MASK)) -+ return -EINVAL; -+ -+ regmap_update_bits(i2s->regmap, I2S_REG_DIVINT, -+ I2S_REG_DIVINT_MASK, divint); -+ regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP, -+ I2S_REG_DIVCMP_DIVCOMP_MASK, divcomp); -+ -+ /* enable clock */ -+ regmap_update_bits(i2s->regmap, I2S_REG_DIVCMP, I2S_REG_DIVCMP_CLKEN, -+ I2S_REG_DIVCMP_CLKEN); -+ -+ dev_dbg(i2s->dev, "clk: %lu, rate: %u, int: %d, comp: %d\n", -+ clk_get_rate(i2s->clk), rate, divint, divcomp); -+ -+ return 0; -+} -+ -+static int ralink_i2s_set_fmt(struct snd_soc_dai *dai, unsigned int fmt) -+{ -+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai); -+ unsigned int cfg0 = 0, cfg1 = 0; -+ -+ /* set master/slave audio interface */ -+ switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) { -+ case SND_SOC_DAIFMT_CBM_CFM: -+ if (i2s->flags & RALINK_FLAGS_TXONLY) -+ cfg0 |= I2S_REG_CFG0_SLAVE_EN; -+ else -+ cfg0 |= I2S_REG_CFG0_SLAVE; -+ break; -+ case SND_SOC_DAIFMT_CBS_CFS: -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ /* interface format */ -+ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { -+ case SND_SOC_DAIFMT_I2S: -+ break; -+ case SND_SOC_DAIFMT_RIGHT_J: -+ if (i2s->flags & RALINK_FLAGS_RIGHT_J) { -+ cfg1 |= I2S_REG_CFG1_RIGHT_J; -+ break; -+ } -+ return -EINVAL; -+ case SND_SOC_DAIFMT_LEFT_J: -+ if (i2s->flags & RALINK_FLAGS_LEFT_J) { -+ cfg1 |= I2S_REG_CFG1_LEFT_J; -+ break; -+ } -+ return -EINVAL; -+ default: -+ return -EINVAL; -+ } -+ -+ /* clock inversion */ -+ switch (fmt & SND_SOC_DAIFMT_INV_MASK) { -+ case SND_SOC_DAIFMT_NB_NF: -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ if (i2s->flags & RALINK_FLAGS_TXONLY) { -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, -+ I2S_REG_CFG0_SLAVE_EN, cfg0); -+ } else { -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, -+ I2S_REG_CFG0_SLAVE, cfg0); -+ } -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG1, -+ I2S_REG_CFG1_FMT_MASK, cfg1); -+ i2s->fmt = fmt; -+ -+ return 0; -+} -+ -+static int ralink_i2s_startup(struct snd_pcm_substream *substream, -+ struct snd_soc_dai *dai) -+{ -+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai); -+ -+ if (snd_soc_dai_active(dai)) -+ return 0; -+ -+ /* setup status interrupt */ -+#if (RALINK_I2S_INT_EN) -+ regmap_write(i2s->regmap, I2S_REG_INT_EN, 0xff); -+#else -+ regmap_write(i2s->regmap, I2S_REG_INT_EN, 0x0); -+#endif -+ -+ /* enable */ -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, -+ I2S_REG_CFG0_EN | I2S_REG_CFG0_DMA_EN | -+ I2S_REG_CFG0_THRES_MASK, -+ I2S_REG_CFG0_EN | I2S_REG_CFG0_DMA_EN | -+ I2S_REG_CFG0_DFT_THRES); -+ -+ return 0; -+} -+ -+static void ralink_i2s_shutdown(struct snd_pcm_substream *substream, -+ struct snd_soc_dai *dai) -+{ -+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai); -+ -+ /* If both streams are stopped, disable module and clock */ -+ if (snd_soc_dai_active(dai)) -+ return; -+ -+ /* -+ * datasheet mention when disable all control regs are cleared -+ * to initial values. need reinit at startup. -+ */ -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, I2S_REG_CFG0_EN, 0); -+} -+ -+static int ralink_i2s_hw_params(struct snd_pcm_substream *substream, -+ struct snd_pcm_hw_params *params, struct snd_soc_dai *dai) -+{ -+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai); -+ int width; -+ int ret; -+ -+ width = params_width(params); -+ switch (width) { -+ case 16: -+ if (i2s->flags & RALINK_FLAGS_24BIT) -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, -+ I2S_REG_CFG0_DATA_24, 0); -+ break; -+ case 24: -+ if (i2s->flags & RALINK_FLAGS_24BIT) { -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, -+ I2S_REG_CFG0_DATA_24, -+ I2S_REG_CFG0_DATA_24); -+ break; -+ } -+ return -EINVAL; -+ default: -+ return -EINVAL; -+ } -+ -+ switch (params_channels(params)) { -+ case 2: -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ if (i2s->flags & RALINK_FLAGS_ENDIAN) { -+ /* system endian */ -+#ifdef SNDRV_LITTLE_ENDIAN -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, -+ I2S_REG_CFG0_SYS_BE, 0); -+#else -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, -+ I2S_REG_CFG0_SYS_BE, -+ I2S_REG_CFG0_SYS_BE); -+#endif -+ -+ /* data endian */ -+ switch (params_format(params)) { -+ case SNDRV_PCM_FORMAT_S16_LE: -+ case SNDRV_PCM_FORMAT_S24_LE: -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, -+ I2S_REG_CFG0_FMT_LE, -+ I2S_REG_CFG0_FMT_LE); -+ break; -+ case SNDRV_PCM_FORMAT_S16_BE: -+ case SNDRV_PCM_FORMAT_S24_BE: -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, -+ I2S_REG_CFG0_FMT_LE, 0); -+ break; -+ default: -+ return -EINVAL; -+ } -+ } -+ -+ /* setup bclk rate */ -+ if (i2s->flags & RALINK_FLAGS_TXONLY) -+ ret = ralink_i2s_set_sys_bclk(dai, width, params_rate(params)); -+ else -+ ret = ralink_i2s_set_bclk(dai, width, params_rate(params)); -+ -+ return ret; -+} -+ -+static int ralink_i2s_trigger(struct snd_pcm_substream *substream, int cmd, -+ struct snd_soc_dai *dai) -+{ -+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai); -+ unsigned int mask, val; -+ -+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) -+ mask = I2S_REG_CFG0_TX_EN; -+ else -+ mask = I2S_REG_CFG0_RX_EN; -+ -+ switch (cmd) { -+ case SNDRV_PCM_TRIGGER_START: -+ case SNDRV_PCM_TRIGGER_RESUME: -+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: -+ val = mask; -+ break; -+ case SNDRV_PCM_TRIGGER_STOP: -+ case SNDRV_PCM_TRIGGER_SUSPEND: -+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH: -+ val = 0; -+ break; -+ default: -+ return -EINVAL; -+ } -+ -+ regmap_update_bits(i2s->regmap, I2S_REG_CFG0, mask, val); -+ -+ return 0; -+} -+ -+static void ralink_i2s_init_dma_data(struct ralink_i2s *i2s, -+ struct resource *res) -+{ -+ struct snd_dmaengine_dai_dma_data *dma_data; -+ -+ /* Playback */ -+ dma_data = &i2s->playback_dma_data; -+ dma_data->addr = res->start + I2S_REG_WREG; -+ dma_data->addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; -+ dma_data->maxburst = 1; -+ dma_data->slave_id = i2s->txdma_req; -+ -+ if (i2s->flags & RALINK_FLAGS_TXONLY) -+ return; -+ -+ /* Capture */ -+ dma_data = &i2s->capture_dma_data; -+ dma_data->addr = res->start + I2S_REG_RREG; -+ dma_data->addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; -+ dma_data->maxburst = 1; -+ dma_data->slave_id = i2s->rxdma_req; -+} -+ -+static int ralink_i2s_dai_probe(struct snd_soc_dai *dai) -+{ -+ struct ralink_i2s *i2s = snd_soc_dai_get_drvdata(dai); -+ -+ snd_soc_dai_init_dma_data(dai, &i2s->playback_dma_data, -+ &i2s->capture_dma_data); -+ -+ return 0; -+} -+ -+static int ralink_i2s_dai_remove(struct snd_soc_dai *dai) -+{ -+ return 0; -+} -+ -+static const struct snd_soc_dai_ops ralink_i2s_dai_ops = { -+ .set_sysclk = ralink_i2s_set_sysclk, -+ .set_fmt = ralink_i2s_set_fmt, -+ .startup = ralink_i2s_startup, -+ .shutdown = ralink_i2s_shutdown, -+ .hw_params = ralink_i2s_hw_params, -+ .trigger = ralink_i2s_trigger, -+}; -+ -+static struct snd_soc_dai_driver ralink_i2s_dai = { -+ .name = DRV_NAME, -+ .probe = ralink_i2s_dai_probe, -+ .remove = ralink_i2s_dai_remove, -+ .ops = &ralink_i2s_dai_ops, -+ .capture = { -+ .stream_name = "I2S Capture", -+ .channels_min = 2, -+ .channels_max = 2, -+ .rate_min = 5512, -+ .rate_max = 192000, -+ .rates = SNDRV_PCM_RATE_CONTINUOUS, -+ .formats = SNDRV_PCM_FMTBIT_S16_LE, -+ }, -+ .playback = { -+ .stream_name = "I2S Playback", -+ .channels_min = 2, -+ .channels_max = 2, -+ .rate_min = 5512, -+ .rate_max = 192000, -+ .rates = SNDRV_PCM_RATE_CONTINUOUS, -+ .formats = SNDRV_PCM_FMTBIT_S16_LE, -+ }, -+ .symmetric_rates = 1, -+}; -+ -+static struct snd_pcm_hardware ralink_pcm_hardware = { -+ .info = SNDRV_PCM_INFO_MMAP | -+ SNDRV_PCM_INFO_MMAP_VALID | -+ SNDRV_PCM_INFO_INTERLEAVED | -+ SNDRV_PCM_INFO_BLOCK_TRANSFER, -+ .formats = SNDRV_PCM_FMTBIT_S16_LE, -+ .channels_min = 2, -+ .channels_max = 2, -+ .period_bytes_min = PAGE_SIZE, -+ .period_bytes_max = PAGE_SIZE * 2, -+ .periods_min = 2, -+ .periods_max = 128, -+ .buffer_bytes_max = 128 * 1024, -+ .fifo_size = RALINK_I2S_FIFO_SIZE, -+}; -+ -+static const struct snd_dmaengine_pcm_config ralink_dmaengine_pcm_config = { -+ .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config, -+ .pcm_hardware = &ralink_pcm_hardware, -+ .prealloc_buffer_size = 256 * PAGE_SIZE, -+}; -+ -+static const struct snd_soc_component_driver ralink_i2s_component = { -+ .name = DRV_NAME, -+}; -+ -+static bool ralink_i2s_readable_reg(struct device *dev, unsigned int reg) -+{ -+ return true; -+} -+ -+static bool ralink_i2s_volatile_reg(struct device *dev, unsigned int reg) -+{ -+ switch (reg) { -+ case I2S_REG_INT_STATUS: -+ case I2S_REG_FF_STATUS: -+ return true; -+ } -+ return false; -+} -+ -+static bool ralink_i2s_writeable_reg(struct device *dev, unsigned int reg) -+{ -+ switch (reg) { -+ case I2S_REG_FF_STATUS: -+ case I2S_REG_RREG: -+ return false; -+ } -+ return true; -+} -+ -+static const struct regmap_config ralink_i2s_regmap_config = { -+ .reg_bits = 32, -+ .reg_stride = 4, -+ .val_bits = 32, -+ .writeable_reg = ralink_i2s_writeable_reg, -+ .readable_reg = ralink_i2s_readable_reg, -+ .volatile_reg = ralink_i2s_volatile_reg, -+ .max_register = I2S_REG_DIVINT, -+}; -+ -+#if (RALINK_I2S_INT_EN) -+static irqreturn_t ralink_i2s_irq(int irq, void *devid) -+{ -+ struct ralink_i2s *i2s = devid; -+ u32 status; -+ -+ regmap_read(i2s->regmap, I2S_REG_INT_STATUS, &status); -+ if (unlikely(!status)) -+ return IRQ_NONE; -+ -+ /* tx stats */ -+ if (status & I2S_REG_INT_TX_MASK) { -+ if (status & I2S_REG_INT_TX_THRES) -+ i2s->txstats.belowthres++; -+ if (status & I2S_REG_INT_TX_UNRUN) -+ i2s->txstats.underrun++; -+ if (status & I2S_REG_INT_TX_OVRUN) -+ i2s->txstats.overrun++; -+ if (status & I2S_REG_INT_TX_FAULT) -+ i2s->txstats.dmafault++; -+ } -+ -+ /* rx stats */ -+ if (status & I2S_REG_INT_RX_MASK) { -+ if (status & I2S_REG_INT_RX_THRES) -+ i2s->rxstats.belowthres++; -+ if (status & I2S_REG_INT_RX_UNRUN) -+ i2s->rxstats.underrun++; -+ if (status & I2S_REG_INT_RX_OVRUN) -+ i2s->rxstats.overrun++; -+ if (status & I2S_REG_INT_RX_FAULT) -+ i2s->rxstats.dmafault++; -+ } -+ -+ /* clean status bits */ -+ regmap_write(i2s->regmap, I2S_REG_INT_STATUS, status); -+ -+ return IRQ_HANDLED; -+} -+#endif -+ -+#if IS_ENABLED(CONFIG_DEBUG_FS) -+static int ralink_i2s_stats_show(struct seq_file *s, void *unused) -+{ -+ struct ralink_i2s *i2s = s->private; -+ -+ seq_printf(s, "tx stats\n"); -+ seq_printf(s, "\tbelow threshold\t%u\n", i2s->txstats.belowthres); -+ seq_printf(s, "\tunder run\t%u\n", i2s->txstats.underrun); -+ seq_printf(s, "\tover run\t%u\n", i2s->txstats.overrun); -+ seq_printf(s, "\tdma fault\t%u\n", i2s->txstats.dmafault); -+ -+ seq_printf(s, "rx stats\n"); -+ seq_printf(s, "\tbelow threshold\t%u\n", i2s->rxstats.belowthres); -+ seq_printf(s, "\tunder run\t%u\n", i2s->rxstats.underrun); -+ seq_printf(s, "\tover run\t%u\n", i2s->rxstats.overrun); -+ seq_printf(s, "\tdma fault\t%u\n", i2s->rxstats.dmafault); -+ -+ ralink_i2s_dump_regs(i2s); -+ -+ return 0; -+} -+ -+static int ralink_i2s_stats_open(struct inode *inode, struct file *file) -+{ -+ return single_open(file, ralink_i2s_stats_show, inode->i_private); -+} -+ -+static const struct file_operations ralink_i2s_stats_ops = { -+ .open = ralink_i2s_stats_open, -+ .read = seq_read, -+ .llseek = seq_lseek, -+ .release = single_release, -+}; -+ -+static inline int ralink_i2s_debugfs_create(struct ralink_i2s *i2s) -+{ -+ i2s->dbg_dir = debugfs_create_dir(dev_name(i2s->dev), NULL); -+ if (!i2s->dbg_dir) -+ return -ENOMEM; -+ -+ i2s->dbg_stats = debugfs_create_file("stats", S_IRUGO, -+ i2s->dbg_dir, i2s, &ralink_i2s_stats_ops); -+ if (!i2s->dbg_stats) { -+ debugfs_remove(i2s->dbg_dir); -+ return -ENOMEM; -+ } -+ -+ return 0; -+} -+ -+static inline void ralink_i2s_debugfs_remove(struct ralink_i2s *i2s) -+{ -+ debugfs_remove(i2s->dbg_stats); -+ debugfs_remove(i2s->dbg_dir); -+} -+#else -+static inline int ralink_i2s_debugfs_create(struct ralink_i2s *i2s) -+{ -+ return 0; -+} -+ -+static inline void ralink_i2s_debugfs_remove(struct fsl_ssi_dbg *ssi_dbg) -+{ -+} -+#endif -+ -+/* -+ * TODO: these refclk setup functions should use -+ * clock framework instead. hardcode it now. -+ */ -+static void rt3350_refclk_setup(void) -+{ -+ uint32_t data; -+ -+ /* set refclk output 12Mhz clock */ -+ data = rt_sysc_r32(0x2c); -+ data |= (0x1 << 8); -+ rt_sysc_w32(data, 0x2c); -+} -+ -+static void rt3883_refclk_setup(void) -+{ -+ uint32_t data; -+ -+ /* set refclk output 12Mhz clock */ -+ data = rt_sysc_r32(0x2c); -+ data &= ~(0x3 << 13); -+ data |= (0x1 << 13); -+ rt_sysc_w32(data, 0x2c); -+} -+ -+static void rt3552_refclk_setup(void) -+{ -+ uint32_t data; -+ -+ /* set refclk output 12Mhz clock */ -+ data = rt_sysc_r32(0x2c); -+ data &= ~(0xf << 8); -+ data |= (0x3 << 8); -+ rt_sysc_w32(data, 0x2c); -+} -+ -+static void mt7620_refclk_setup(void) -+{ -+ uint32_t data; -+ -+ /* set refclk output 12Mhz clock */ -+ data = rt_sysc_r32(0x2c); -+ data &= ~(0x7 << 9); -+ data |= 0x1 << 9; -+ rt_sysc_w32(data, 0x2c); -+} -+ -+static void mt7621_refclk_setup(void) -+{ -+ uint32_t data; -+ -+ /* set refclk output 12Mhz clock */ -+ data = rt_sysc_r32(0x2c); -+ data &= ~(0x1f << 18); -+ data |= (0x19 << 18); -+ data &= ~(0x1f << 12); -+ data |= (0x1 << 12); -+ data &= ~(0x7 << 9); -+ data |= (0x5 << 9); -+ rt_sysc_w32(data, 0x2c); -+} -+ -+static void mt7628_refclk_setup(void) -+{ -+ uint32_t data; -+ -+ /* set i2s and refclk digital pad */ -+ data = rt_sysc_r32(0x3c); -+ data |= 0x1f; -+ rt_sysc_w32(data, 0x3c); -+ -+ /* Adjust REFCLK0's driving strength */ -+ data = rt_sysc_r32(0x1354); -+ data &= ~(0x1 << 5); -+ rt_sysc_w32(data, 0x1354); -+ data = rt_sysc_r32(0x1364); -+ data |= ~(0x1 << 5); -+ rt_sysc_w32(data, 0x1364); -+ -+ /* set refclk output 12Mhz clock */ -+ data = rt_sysc_r32(0x2c); -+ data &= ~(0x7 << 9); -+ data |= 0x1 << 9; -+ rt_sysc_w32(data, 0x2c); -+} -+ -+struct rt_i2s_data { -+ u32 flags; -+ void (*refclk_setup)(void); -+}; -+ -+struct rt_i2s_data rt3050_i2s_data = { .flags = RALINK_FLAGS_TXONLY }; -+struct rt_i2s_data rt3350_i2s_data = { .flags = RALINK_FLAGS_TXONLY, -+ .refclk_setup = rt3350_refclk_setup }; -+struct rt_i2s_data rt3883_i2s_data = { -+ .flags = (RALINK_FLAGS_LEFT_J | RALINK_FLAGS_RIGHT_J), -+ .refclk_setup = rt3883_refclk_setup }; -+struct rt_i2s_data rt3352_i2s_data = { .refclk_setup = rt3552_refclk_setup}; -+struct rt_i2s_data mt7620_i2s_data = { .refclk_setup = mt7620_refclk_setup}; -+struct rt_i2s_data mt7621_i2s_data = { .refclk_setup = mt7621_refclk_setup}; -+struct rt_i2s_data mt7628_i2s_data = { -+ .flags = (RALINK_FLAGS_ENDIAN | RALINK_FLAGS_24BIT | -+ RALINK_FLAGS_LEFT_J), -+ .refclk_setup = mt7628_refclk_setup}; -+ -+static const struct of_device_id ralink_i2s_match_table[] = { -+ { .compatible = "ralink,rt3050-i2s", -+ .data = (void *)&rt3050_i2s_data }, -+ { .compatible = "ralink,rt3350-i2s", -+ .data = (void *)&rt3350_i2s_data }, -+ { .compatible = "ralink,rt3883-i2s", -+ .data = (void *)&rt3883_i2s_data }, -+ { .compatible = "ralink,rt3352-i2s", -+ .data = (void *)&rt3352_i2s_data }, -+ { .compatible = "mediatek,mt7620-i2s", -+ .data = (void *)&mt7620_i2s_data }, -+ { .compatible = "mediatek,mt7621-i2s", -+ .data = (void *)&mt7621_i2s_data }, -+ { .compatible = "mediatek,mt7628-i2s", -+ .data = (void *)&mt7628_i2s_data }, -+}; -+MODULE_DEVICE_TABLE(of, ralink_i2s_match_table); -+ -+static int ralink_i2s_probe(struct platform_device *pdev) -+{ -+ const struct of_device_id *match; -+ struct device_node *np = pdev->dev.of_node; -+ struct ralink_i2s *i2s; -+ struct resource *res; -+ int irq, ret; -+ u32 dma_req; -+ struct rt_i2s_data *data; -+ -+ i2s = devm_kzalloc(&pdev->dev, sizeof(*i2s), GFP_KERNEL); -+ if (!i2s) -+ return -ENOMEM; -+ -+ platform_set_drvdata(pdev, i2s); -+ i2s->dev = &pdev->dev; -+ -+ match = of_match_device(ralink_i2s_match_table, &pdev->dev); -+ if (!match) -+ return -EINVAL; -+ data = (struct rt_i2s_data *)match->data; -+ i2s->flags = data->flags; -+ /* setup out 12Mhz refclk to codec as mclk */ -+ if (data->refclk_setup) -+ data->refclk_setup(); -+ -+ if (of_property_read_u32(np, "txdma-req", &dma_req)) { -+ dev_err(&pdev->dev, "no txdma-req define\n"); -+ return -EINVAL; -+ } -+ i2s->txdma_req = (u16)dma_req; -+ if (!(i2s->flags & RALINK_FLAGS_TXONLY)) { -+ if (of_property_read_u32(np, "rxdma-req", &dma_req)) { -+ dev_err(&pdev->dev, "no rxdma-req define\n"); -+ return -EINVAL; -+ } -+ i2s->rxdma_req = (u16)dma_req; -+ } -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ i2s->regs = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(i2s->regs)) -+ return PTR_ERR(i2s->regs); -+ -+ i2s->regmap = devm_regmap_init_mmio(&pdev->dev, i2s->regs, -+ &ralink_i2s_regmap_config); -+ if (IS_ERR(i2s->regmap)) { -+ dev_err(&pdev->dev, "regmap init failed\n"); -+ return PTR_ERR(i2s->regmap); -+ } -+ -+ irq = platform_get_irq(pdev, 0); -+ if (irq < 0) { -+ dev_err(&pdev->dev, "failed to get irq\n"); -+ return -EINVAL; -+ } -+ -+#if (RALINK_I2S_INT_EN) -+ ret = devm_request_irq(&pdev->dev, irq, ralink_i2s_irq, -+ 0, dev_name(&pdev->dev), i2s); -+ if (ret) { -+ dev_err(&pdev->dev, "failed to request irq\n"); -+ return ret; -+ } -+#endif -+ -+ i2s->clk = devm_clk_get(&pdev->dev, NULL); -+ if (IS_ERR(i2s->clk)) { -+ dev_err(&pdev->dev, "no clock defined\n"); -+ return PTR_ERR(i2s->clk); -+ } -+ -+ ret = clk_prepare_enable(i2s->clk); -+ if (ret) -+ return ret; -+ -+ ralink_i2s_init_dma_data(i2s, res); -+ -+ device_reset(&pdev->dev); -+ -+ ret = ralink_i2s_debugfs_create(i2s); -+ if (ret) { -+ dev_err(&pdev->dev, "create debugfs failed\n"); -+ goto err_clk_disable; -+ } -+ -+ /* enable 24bits support */ -+ if (i2s->flags & RALINK_FLAGS_24BIT) { -+ ralink_i2s_dai.capture.formats |= SNDRV_PCM_FMTBIT_S24_LE; -+ ralink_i2s_dai.playback.formats |= SNDRV_PCM_FMTBIT_S24_LE; -+ } -+ -+ /* enable big endian support */ -+ if (i2s->flags & RALINK_FLAGS_ENDIAN) { -+ ralink_i2s_dai.capture.formats |= SNDRV_PCM_FMTBIT_S16_BE; -+ ralink_i2s_dai.playback.formats |= SNDRV_PCM_FMTBIT_S16_BE; -+ ralink_pcm_hardware.formats |= SNDRV_PCM_FMTBIT_S16_BE; -+ if (i2s->flags & RALINK_FLAGS_24BIT) { -+ ralink_i2s_dai.capture.formats |= -+ SNDRV_PCM_FMTBIT_S24_BE; -+ ralink_i2s_dai.playback.formats |= -+ SNDRV_PCM_FMTBIT_S24_BE; -+ ralink_pcm_hardware.formats |= -+ SNDRV_PCM_FMTBIT_S24_BE; -+ } -+ } -+ -+ /* disable capture support */ -+ if (i2s->flags & RALINK_FLAGS_TXONLY) -+ memset(&ralink_i2s_dai.capture, sizeof(ralink_i2s_dai.capture), -+ 0); -+ -+ ret = devm_snd_soc_register_component(&pdev->dev, &ralink_i2s_component, -+ &ralink_i2s_dai, 1); -+ if (ret) -+ goto err_debugfs; -+ -+ ret = devm_snd_dmaengine_pcm_register(&pdev->dev, -+ &ralink_dmaengine_pcm_config, -+ SND_DMAENGINE_PCM_FLAG_COMPAT); -+ if (ret) -+ goto err_debugfs; -+ -+ dev_info(i2s->dev, "mclk %luMHz\n", clk_get_rate(i2s->clk) / 1000000); -+ -+ return 0; -+ -+err_debugfs: -+ ralink_i2s_debugfs_remove(i2s); -+ -+err_clk_disable: -+ clk_disable_unprepare(i2s->clk); -+ -+ return ret; -+} -+ -+static int ralink_i2s_remove(struct platform_device *pdev) -+{ -+ struct ralink_i2s *i2s = platform_get_drvdata(pdev); -+ -+ ralink_i2s_debugfs_remove(i2s); -+ clk_disable_unprepare(i2s->clk); -+ -+ return 0; -+} -+ -+static struct platform_driver ralink_i2s_driver = { -+ .probe = ralink_i2s_probe, -+ .remove = ralink_i2s_remove, -+ .driver = { -+ .name = DRV_NAME, -+ .of_match_table = ralink_i2s_match_table, -+ }, -+}; -+module_platform_driver(ralink_i2s_driver); -+ -+MODULE_AUTHOR("Lars-Peter Clausen, "); -+MODULE_DESCRIPTION("Ralink/MediaTek I2S driver"); -+MODULE_LICENSE("GPL"); -+MODULE_ALIAS("platform:" DRV_NAME); diff --git a/target/linux/ramips/patches-5.10/840-serial-add-ugly-custom-baud-rate-hack.patch b/target/linux/ramips/patches-5.10/840-serial-add-ugly-custom-baud-rate-hack.patch deleted file mode 100644 index 634033d18d3f..000000000000 --- a/target/linux/ramips/patches-5.10/840-serial-add-ugly-custom-baud-rate-hack.patch +++ /dev/null @@ -1,22 +0,0 @@ -From a7eb46e0ea4a11e4dfb56ab129bf816d1059a6c5 Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 7 Dec 2015 17:31:08 +0100 -Subject: [PATCH 51/53] serial: add ugly custom baud rate hack - -Signed-off-by: John Crispin ---- - drivers/tty/serial/serial_core.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/drivers/tty/serial/serial_core.c -+++ b/drivers/tty/serial/serial_core.c -@@ -418,6 +418,9 @@ uart_get_baud_rate(struct uart_port *por - break; - } - -+ if (tty_termios_baud_rate(termios) == 2500000) -+ return 250000; -+ - for (try = 0; try < 2; try++) { - baud = tty_termios_baud_rate(termios); - diff --git a/target/linux/ramips/patches-5.10/845-pwm-add-mediatek-support.patch b/target/linux/ramips/patches-5.10/845-pwm-add-mediatek-support.patch deleted file mode 100644 index 794e3360fbb7..000000000000 --- a/target/linux/ramips/patches-5.10/845-pwm-add-mediatek-support.patch +++ /dev/null @@ -1,217 +0,0 @@ -From fc8f96309c21c1bc3276427309cd7d361347d66e Mon Sep 17 00:00:00 2001 -From: John Crispin -Date: Mon, 7 Dec 2015 17:16:50 +0100 -Subject: [PATCH 52/53] pwm: add mediatek support - -Signed-off-by: John Crispin ---- - drivers/pwm/Kconfig | 9 +++ - drivers/pwm/Makefile | 1 + - drivers/pwm/pwm-mediatek.c | 173 ++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 183 insertions(+) - create mode 100644 drivers/pwm/pwm-mediatek.c - ---- a/drivers/pwm/Kconfig -+++ b/drivers/pwm/Kconfig -@@ -339,6 +339,15 @@ config PWM_MEDIATEK - To compile this driver as a module, choose M here: the module - will be called pwm-mediatek. - -+config PWM_MEDIATEK_RAMIPS -+ tristate "Mediatek PWM support" -+ depends on RALINK && OF -+ help -+ Generic PWM framework driver for Mediatek ARM SoC. -+ -+ To compile this driver as a module, choose M here: the module -+ will be called pwm-mxs. -+ - config PWM_MXS - tristate "Freescale MXS PWM support" - depends on OF ---- a/drivers/pwm/Makefile -+++ b/drivers/pwm/Makefile -@@ -30,6 +30,7 @@ obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-p - obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o - obj-$(CONFIG_PWM_MESON) += pwm-meson.o - obj-$(CONFIG_PWM_MEDIATEK) += pwm-mediatek.o -+obj-$(CONFIG_PWM_MEDIATEK_RAMIPS) += pwm-mediatek-ramips.o - obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o - obj-$(CONFIG_PWM_MXS) += pwm-mxs.o - obj-$(CONFIG_PWM_OMAP_DMTIMER) += pwm-omap-dmtimer.o ---- /dev/null -+++ b/drivers/pwm/pwm-mediatek-ramips.c -@@ -0,0 +1,173 @@ -+/* -+ * Mediatek Pulse Width Modulator driver -+ * -+ * Copyright (C) 2015 John Crispin -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without any -+ * warranty of any kind, whether express or implied. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define NUM_PWM 4 -+ -+/* PWM registers and bits definitions */ -+#define PWMCON 0x00 -+#define PWMHDUR 0x04 -+#define PWMLDUR 0x08 -+#define PWMGDUR 0x0c -+#define PWMWAVENUM 0x28 -+#define PWMDWIDTH 0x2c -+#define PWMTHRES 0x30 -+ -+/** -+ * struct mtk_pwm_chip - struct representing pwm chip -+ * -+ * @mmio_base: base address of pwm chip -+ * @chip: linux pwm chip representation -+ */ -+struct mtk_pwm_chip { -+ void __iomem *mmio_base; -+ struct pwm_chip chip; -+}; -+ -+static inline struct mtk_pwm_chip *to_mtk_pwm_chip(struct pwm_chip *chip) -+{ -+ return container_of(chip, struct mtk_pwm_chip, chip); -+} -+ -+static inline u32 mtk_pwm_readl(struct mtk_pwm_chip *chip, unsigned int num, -+ unsigned long offset) -+{ -+ return ioread32(chip->mmio_base + 0x10 + (num * 0x40) + offset); -+} -+ -+static inline void mtk_pwm_writel(struct mtk_pwm_chip *chip, -+ unsigned int num, unsigned long offset, -+ unsigned long val) -+{ -+ iowrite32(val, chip->mmio_base + 0x10 + (num * 0x40) + offset); -+} -+ -+static int mtk_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, -+ int duty_ns, int period_ns) -+{ -+ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip); -+ u32 resolution = 100 / 4; -+ u32 clkdiv = 0; -+ -+ while (period_ns / resolution > 8191) { -+ clkdiv++; -+ resolution *= 2; -+ } -+ -+ if (clkdiv > 7) -+ return -1; -+ -+ mtk_pwm_writel(pc, pwm->hwpwm, PWMCON, BIT(15) | BIT(3) | clkdiv); -+ mtk_pwm_writel(pc, pwm->hwpwm, PWMDWIDTH, period_ns / resolution); -+ mtk_pwm_writel(pc, pwm->hwpwm, PWMTHRES, duty_ns / resolution); -+ return 0; -+} -+ -+static int mtk_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm) -+{ -+ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip); -+ u32 val; -+ -+ val = ioread32(pc->mmio_base); -+ val |= BIT(pwm->hwpwm); -+ iowrite32(val, pc->mmio_base); -+ -+ return 0; -+} -+ -+static void mtk_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) -+{ -+ struct mtk_pwm_chip *pc = to_mtk_pwm_chip(chip); -+ u32 val; -+ -+ val = ioread32(pc->mmio_base); -+ val &= ~BIT(pwm->hwpwm); -+ iowrite32(val, pc->mmio_base); -+} -+ -+static const struct pwm_ops mtk_pwm_ops = { -+ .config = mtk_pwm_config, -+ .enable = mtk_pwm_enable, -+ .disable = mtk_pwm_disable, -+ .owner = THIS_MODULE, -+}; -+ -+static int mtk_pwm_probe(struct platform_device *pdev) -+{ -+ struct mtk_pwm_chip *pc; -+ struct resource *r; -+ int ret; -+ -+ pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL); -+ if (!pc) -+ return -ENOMEM; -+ -+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ pc->mmio_base = devm_ioremap_resource(&pdev->dev, r); -+ if (IS_ERR(pc->mmio_base)) -+ return PTR_ERR(pc->mmio_base); -+ -+ platform_set_drvdata(pdev, pc); -+ -+ pc->chip.dev = &pdev->dev; -+ pc->chip.ops = &mtk_pwm_ops; -+ pc->chip.base = -1; -+ pc->chip.npwm = NUM_PWM; -+ -+ ret = pwmchip_add(&pc->chip); -+ if (ret < 0) -+ dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret); -+ -+ return ret; -+} -+ -+static int mtk_pwm_remove(struct platform_device *pdev) -+{ -+ struct mtk_pwm_chip *pc = platform_get_drvdata(pdev); -+ int i; -+ -+ for (i = 0; i < NUM_PWM; i++) -+ pwm_disable(&pc->chip.pwms[i]); -+ -+ return pwmchip_remove(&pc->chip); -+} -+ -+static const struct of_device_id mtk_pwm_of_match[] = { -+ { .compatible = "mediatek,mt7628-pwm" }, -+ { } -+}; -+ -+MODULE_DEVICE_TABLE(of, mtk_pwm_of_match); -+ -+static struct platform_driver mtk_pwm_driver = { -+ .driver = { -+ .name = "mtk-pwm", -+ .owner = THIS_MODULE, -+ .of_match_table = mtk_pwm_of_match, -+ }, -+ .probe = mtk_pwm_probe, -+ .remove = mtk_pwm_remove, -+}; -+ -+module_platform_driver(mtk_pwm_driver); -+ -+MODULE_LICENSE("GPL"); -+MODULE_AUTHOR("John Crispin "); -+MODULE_ALIAS("platform:mtk-pwm"); diff --git a/target/linux/ramips/patches-5.10/850-awake-rt305x-dwc2-controller.patch b/target/linux/ramips/patches-5.10/850-awake-rt305x-dwc2-controller.patch deleted file mode 100644 index 19c8ec877ee5..000000000000 --- a/target/linux/ramips/patches-5.10/850-awake-rt305x-dwc2-controller.patch +++ /dev/null @@ -1,15 +0,0 @@ ---- a/drivers/usb/dwc2/platform.c -+++ b/drivers/usb/dwc2/platform.c -@@ -477,6 +477,12 @@ static int dwc2_driver_probe(struct plat - if (retval) - return retval; - -+ /* Enable USB port before any regs access */ -+ if (readl(hsotg->regs + PCGCTL) & 0x0f) { -+ writel(0x00, hsotg->regs + PCGCTL); -+ /* TODO: mdelay(25) here? vendor driver don't use it */ -+ } -+ - hsotg->needs_byte_swap = dwc2_check_core_endianness(hsotg); - - retval = dwc2_get_dr_mode(hsotg); diff --git a/target/linux/ramips/patches-5.10/855-linkit_bootstrap.patch b/target/linux/ramips/patches-5.10/855-linkit_bootstrap.patch deleted file mode 100644 index 379aa28ae28b..000000000000 --- a/target/linux/ramips/patches-5.10/855-linkit_bootstrap.patch +++ /dev/null @@ -1,97 +0,0 @@ ---- a/drivers/misc/Makefile -+++ b/drivers/misc/Makefile -@@ -50,6 +50,7 @@ obj-$(CONFIG_GENWQE) += genwqe/ - obj-$(CONFIG_ECHO) += echo/ - obj-$(CONFIG_CXL_BASE) += cxl/ - obj-$(CONFIG_PCI_ENDPOINT_TEST) += pci_endpoint_test.o -+obj-$(CONFIG_SOC_MT7620) += linkit.o - obj-$(CONFIG_OCXL) += ocxl/ - obj-y += cardreader/ - obj-$(CONFIG_PVPANIC) += pvpanic.o ---- /dev/null -+++ b/drivers/misc/linkit.c -@@ -0,0 +1,84 @@ -+/* -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * publishhed by the Free Software Foundation. -+ * -+ * Copyright (C) 2015 John Crispin -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+#define LINKIT_LATCH_GPIO 11 -+ -+struct linkit_hw_data { -+ char board[16]; -+ char rev[16]; -+}; -+ -+static void sanify_string(char *s) -+{ -+ int i; -+ -+ for (i = 0; i < 15; i++) -+ if (s[i] <= 0x20) -+ s[i] = '\0'; -+ s[15] = '\0'; -+} -+ -+static int linkit_probe(struct platform_device *pdev) -+{ -+ struct linkit_hw_data hw; -+ struct mtd_info *mtd; -+ size_t retlen; -+ int ret; -+ -+ mtd = get_mtd_device_nm("factory"); -+ if (IS_ERR(mtd)) -+ return PTR_ERR(mtd); -+ -+ ret = mtd_read(mtd, 0x400, sizeof(hw), &retlen, (u_char *) &hw); -+ put_mtd_device(mtd); -+ -+ sanify_string(hw.board); -+ sanify_string(hw.rev); -+ -+ dev_info(&pdev->dev, "Version : %s\n", hw.board); -+ dev_info(&pdev->dev, "Revision : %s\n", hw.rev); -+ -+ if (!strcmp(hw.board, "LINKITS7688")) { -+ dev_info(&pdev->dev, "setting up bootstrap latch\n"); -+ -+ if (devm_gpio_request(&pdev->dev, LINKIT_LATCH_GPIO, "bootstrap")) { -+ dev_err(&pdev->dev, "failed to setup bootstrap gpio\n"); -+ return -1; -+ } -+ gpio_direction_output(LINKIT_LATCH_GPIO, 0); -+ } -+ -+ return 0; -+} -+ -+static const struct of_device_id linkit_match[] = { -+ { .compatible = "mediatek,linkit" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, linkit_match); -+ -+static struct platform_driver linkit_driver = { -+ .probe = linkit_probe, -+ .driver = { -+ .name = "mtk-linkit", -+ .owner = THIS_MODULE, -+ .of_match_table = linkit_match, -+ }, -+}; -+ -+int __init linkit_init(void) -+{ -+ return platform_driver_register(&linkit_driver); -+} -+late_initcall_sync(linkit_init); diff --git a/target/linux/ramips/rt288x/config-5.10 b/target/linux/ramips/rt288x/config-5.10 deleted file mode 100644 index 2fbab0baf0c4..000000000000 --- a/target/linux/ramips/rt288x/config-5.10 +++ /dev/null @@ -1,177 +0,0 @@ -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MMAP_RND_BITS_MAX=15 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15 -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_BLK_MQ_PCI=y -CONFIG_CEVT_R4K=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE="rootfstype=squashfs,jffs2" -CONFIG_CMDLINE_BOOL=y -# CONFIG_CMDLINE_OVERRIDE is not set -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CPU_GENERIC_DUMP_TLB=y -CONFIG_CPU_HAS_DIEI=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_RIXI=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS32_R1 is not set -CONFIG_CPU_MIPS32_R2=y -CONFIG_CPU_MIPSR2=y -CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y -CONFIG_CPU_R4K_CACHE_TLB=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CPU_SUPPORTS_MSA=y -CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2 -CONFIG_CRYPTO_RNG2=y -CONFIG_CSRC_R4K=y -CONFIG_DMA_NONCOHERENT=y -# CONFIG_DTB_RT2880_EVAL is not set -CONFIG_DTB_RT_NONE=y -CONFIG_DTC=y -CONFIG_EARLY_PRINTK=y -CONFIG_FIXED_PHY=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IOMAP=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_LIB_ASHLDI3=y -CONFIG_GENERIC_LIB_ASHRDI3=y -CONFIG_GENERIC_LIB_CMPDI2=y -CONFIG_GENERIC_LIB_LSHRDI3=y -CONFIG_GENERIC_LIB_UCMPDI2=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_RALINK=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HZ=250 -CONFIG_HZ_250=y -CONFIG_HZ_PERIODIC=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IP17XX_PHY=y -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_INTC=y -CONFIG_IRQ_MIPS_CPU=y -CONFIG_IRQ_WORK=y -# CONFIG_KERNEL_ZSTD is not set -CONFIG_LIBFDT=y -CONFIG_LLD_VERSION=0 -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MEMFD_CREATE=y -CONFIG_MIGRATION=y -CONFIG_MIPS=y -CONFIG_MIPS_ASID_BITS=8 -CONFIG_MIPS_ASID_SHIFT=0 -CONFIG_MIPS_CBPF_JIT=y -CONFIG_MIPS_CLOCK_VSYSCALL=y -# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set -# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set -# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set -CONFIG_MIPS_CMDLINE_FROM_DTB=y -# CONFIG_MIPS_ELF_APPENDED_DTB is not set -CONFIG_MIPS_L1_CACHE_SHIFT=4 -CONFIG_MIPS_L1_CACHE_SHIFT_4=y -CONFIG_MIPS_LD_CAN_LINK_VDSO=y -# CONFIG_MIPS_NO_APPENDED_DTB is not set -CONFIG_MIPS_RAW_APPENDED_DTB=y -CONFIG_MIPS_SPRAM=y -CONFIG_MODULES_USE_ELF_REL=y -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_LZMA_FW=y -CONFIG_MTD_SPLIT_UIMAGE_FW=y -CONFIG_MTD_SPLIT_WRGG_FW=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NET_RALINK_MDIO=y -CONFIG_NET_RALINK_MDIO_RT2880=y -CONFIG_NET_RALINK_RT2880=y -CONFIG_NET_RALINK_SOC=y -CONFIG_NET_VENDOR_RALINK=y -CONFIG_NLS=m -CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DRIVERS_LEGACY=y -# CONFIG_PCI_MT7621 is not set -# CONFIG_PCI_MT7621_PHY is not set -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -# CONFIG_PHY_RALINK_USB is not set -CONFIG_PINCTRL=y -CONFIG_PINCTRL_RT2880=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_RALINK=y -CONFIG_RALINK_WDT=y -CONFIG_RESET_CONTROLLER=y -CONFIG_SERIAL_8250_RT288X=y -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_OF_PLATFORM=y -# CONFIG_SOC_MT7620 is not set -# CONFIG_SOC_MT7621 is not set -CONFIG_SOC_RT288X=y -# CONFIG_SOC_RT305X is not set -# CONFIG_SOC_RT3883 is not set -CONFIG_SPI=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -# CONFIG_SPI_MT7621 is not set -CONFIG_SPI_RT2880=y -CONFIG_SRCU=y -CONFIG_SWCONFIG=y -CONFIG_SWPHY=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_SYS_SUPPORTS_MIPS16=y -CONFIG_SYS_SUPPORTS_ZBOOT=y -CONFIG_TARGET_ISA_REV=2 -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TINY_SRCU=y -CONFIG_USB=m -CONFIG_USB_COMMON=m -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_EHCI_HCD_PLATFORM=m -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_OHCI_HCD_PLATFORM=m -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -CONFIG_WATCHDOG_CORE=y diff --git a/target/linux/ramips/rt305x/config-5.10 b/target/linux/ramips/rt305x/config-5.10 deleted file mode 100644 index 94ba19efbea3..000000000000 --- a/target/linux/ramips/rt305x/config-5.10 +++ /dev/null @@ -1,176 +0,0 @@ -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MMAP_RND_BITS_MAX=15 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15 -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_CEVT_R4K=y -CONFIG_CEVT_SYSTICK_QUIRK=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLKEVT_RT3352=y -CONFIG_CLKSRC_MMIO=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE="rootfstype=squashfs,jffs2" -CONFIG_CMDLINE_BOOL=y -# CONFIG_CMDLINE_OVERRIDE is not set -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CPU_GENERIC_DUMP_TLB=y -CONFIG_CPU_HAS_DIEI=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_RIXI=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS32_R1 is not set -CONFIG_CPU_MIPS32_R2=y -CONFIG_CPU_MIPSR2=y -CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y -CONFIG_CPU_R4K_CACHE_TLB=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CPU_SUPPORTS_MSA=y -CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2 -CONFIG_CRYPTO_RNG2=y -CONFIG_CSRC_R4K=y -CONFIG_DEBUG_PINCTRL=y -CONFIG_DMA_NONCOHERENT=y -# CONFIG_DTB_RT305X_EVAL is not set -CONFIG_DTB_RT_NONE=y -CONFIG_DTC=y -CONFIG_EARLY_PRINTK=y -CONFIG_FIXED_PHY=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IOMAP=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_LIB_ASHLDI3=y -CONFIG_GENERIC_LIB_ASHRDI3=y -CONFIG_GENERIC_LIB_CMPDI2=y -CONFIG_GENERIC_LIB_LSHRDI3=y -CONFIG_GENERIC_LIB_UCMPDI2=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_RALINK=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HZ=250 -CONFIG_HZ_250=y -CONFIG_HZ_PERIODIC=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_INTC=y -CONFIG_IRQ_MIPS_CPU=y -CONFIG_IRQ_WORK=y -# CONFIG_KERNEL_ZSTD is not set -CONFIG_LIBFDT=y -CONFIG_LLD_VERSION=0 -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MEMFD_CREATE=y -CONFIG_MFD_SYSCON=y -CONFIG_MIGRATION=y -CONFIG_MIPS=y -CONFIG_MIPS_ASID_BITS=8 -CONFIG_MIPS_ASID_SHIFT=0 -CONFIG_MIPS_CBPF_JIT=y -CONFIG_MIPS_CLOCK_VSYSCALL=y -# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set -# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set -# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set -CONFIG_MIPS_CMDLINE_FROM_DTB=y -# CONFIG_MIPS_ELF_APPENDED_DTB is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_MIPS_LD_CAN_LINK_VDSO=y -# CONFIG_MIPS_NO_APPENDED_DTB is not set -CONFIG_MIPS_RAW_APPENDED_DTB=y -CONFIG_MIPS_SPRAM=y -CONFIG_MODULES_USE_ELF_REL=y -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384 -CONFIG_MTD_SPLIT_JIMAGE_FW=y -CONFIG_MTD_SPLIT_SEAMA_FW=y -CONFIG_MTD_SPLIT_UIMAGE_FW=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NET_RALINK_ESW_RT3050=y -CONFIG_NET_RALINK_RT3050=y -CONFIG_NET_RALINK_SOC=y -CONFIG_NET_VENDOR_RALINK=y -CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_PCI_DRIVERS_LEGACY=y -# CONFIG_PCI_MT7621 is not set -# CONFIG_PCI_MT7621_PHY is not set -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHY_RALINK_USB=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_RT2880=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_RALINK=y -# CONFIG_RALINK_ILL_ACC is not set -CONFIG_RALINK_WDT=y -CONFIG_REGMAP=y -CONFIG_REGMAP_MMIO=y -CONFIG_RESET_CONTROLLER=y -CONFIG_SERIAL_8250_RT288X=y -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_OF_PLATFORM=y -# CONFIG_SOC_MT7620 is not set -# CONFIG_SOC_MT7621 is not set -# CONFIG_SOC_RT288X is not set -CONFIG_SOC_RT305X=y -# CONFIG_SOC_RT3883 is not set -CONFIG_SPI=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -# CONFIG_SPI_MT7621 is not set -CONFIG_SPI_RT2880=y -CONFIG_SRCU=y -CONFIG_SWCONFIG=y -CONFIG_SWPHY=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_SYS_SUPPORTS_MIPS16=y -CONFIG_SYS_SUPPORTS_ZBOOT=y -CONFIG_TARGET_ISA_REV=2 -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TINY_SRCU=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -CONFIG_WATCHDOG_CORE=y diff --git a/target/linux/ramips/rt3883/config-5.10 b/target/linux/ramips/rt3883/config-5.10 deleted file mode 100644 index 65b7be7ea4c1..000000000000 --- a/target/linux/ramips/rt3883/config-5.10 +++ /dev/null @@ -1,177 +0,0 @@ -CONFIG_AR8216_PHY=y -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_MMAP_RND_BITS_MAX=15 -CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=15 -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_BLK_MQ_PCI=y -CONFIG_CEVT_R4K=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE="rootfstype=squashfs,jffs2" -CONFIG_CMDLINE_BOOL=y -# CONFIG_CMDLINE_OVERRIDE is not set -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CPU_GENERIC_DUMP_TLB=y -CONFIG_CPU_HAS_DIEI=y -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_CPU_HAS_RIXI=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_CPU_MIPS32=y -# CONFIG_CPU_MIPS32_R1 is not set -CONFIG_CPU_MIPS32_R2=y -CONFIG_CPU_MIPSR2=y -CONFIG_CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS=y -CONFIG_CPU_R4K_CACHE_TLB=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_CPU_SUPPORTS_MSA=y -CONFIG_CRYPTO_LIB_POLY1305_RSIZE=2 -CONFIG_CRYPTO_RNG2=y -CONFIG_CSRC_R4K=y -CONFIG_DEBUG_PINCTRL=y -CONFIG_DMA_NONCOHERENT=y -# CONFIG_DTB_RT3883_EVAL is not set -CONFIG_DTB_RT_NONE=y -CONFIG_DTC=y -CONFIG_EARLY_PRINTK=y -CONFIG_FIXED_PHY=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_GENERIC_ATOMIC64=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IOMAP=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_LIB_ASHLDI3=y -CONFIG_GENERIC_LIB_ASHRDI3=y -CONFIG_GENERIC_LIB_CMPDI2=y -CONFIG_GENERIC_LIB_LSHRDI3=y -CONFIG_GENERIC_LIB_UCMPDI2=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_RALINK=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDWARE_WATCHPOINTS=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HZ=250 -CONFIG_HZ_250=y -CONFIG_HZ_PERIODIC=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_INTC=y -CONFIG_IRQ_MIPS_CPU=y -CONFIG_IRQ_WORK=y -# CONFIG_KERNEL_ZSTD is not set -CONFIG_LIBFDT=y -CONFIG_LLD_VERSION=0 -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MEMFD_CREATE=y -CONFIG_MFD_SYSCON=y -CONFIG_MIGRATION=y -CONFIG_MIPS=y -CONFIG_MIPS_ASID_BITS=8 -CONFIG_MIPS_ASID_SHIFT=0 -CONFIG_MIPS_CBPF_JIT=y -CONFIG_MIPS_CLOCK_VSYSCALL=y -# CONFIG_MIPS_CMDLINE_BUILTIN_EXTEND is not set -# CONFIG_MIPS_CMDLINE_DTB_EXTEND is not set -# CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER is not set -CONFIG_MIPS_CMDLINE_FROM_DTB=y -# CONFIG_MIPS_ELF_APPENDED_DTB is not set -CONFIG_MIPS_L1_CACHE_SHIFT=5 -CONFIG_MIPS_LD_CAN_LINK_VDSO=y -# CONFIG_MIPS_NO_APPENDED_DTB is not set -CONFIG_MIPS_RAW_APPENDED_DTB=y -CONFIG_MIPS_SPRAM=y -CONFIG_MODULES_USE_ELF_REL=y -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS=y -CONFIG_MTD_SPI_NOR_USE_4K_SECTORS_LIMIT=16384 -CONFIG_MTD_SPLIT_SEAMA_FW=y -CONFIG_MTD_SPLIT_UIMAGE_FW=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_PER_CPU_KM=y -CONFIG_NET_RALINK_MDIO=y -CONFIG_NET_RALINK_MDIO_RT2880=y -CONFIG_NET_RALINK_RT3883=y -CONFIG_NET_RALINK_SOC=y -CONFIG_NET_VENDOR_RALINK=y -CONFIG_NO_GENERIC_PCI_IOPORT_MAP=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OF_NET=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DRIVERS_LEGACY=y -# CONFIG_PCI_MT7621 is not set -# CONFIG_PCI_MT7621_PHY is not set -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHY_RALINK_USB=y -CONFIG_PINCTRL=y -CONFIG_PINCTRL_RT2880=y -# CONFIG_PINCTRL_SINGLE is not set -CONFIG_RALINK=y -CONFIG_RALINK_WDT=y -CONFIG_REGMAP=y -CONFIG_REGMAP_MMIO=y -CONFIG_RESET_CONTROLLER=y -CONFIG_RTL8366_SMI=y -CONFIG_RTL8367B_PHY=y -CONFIG_RTL8367_PHY=y -CONFIG_SERIAL_8250_RT288X=y -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_OF_PLATFORM=y -# CONFIG_SOC_MT7620 is not set -# CONFIG_SOC_MT7621 is not set -# CONFIG_SOC_RT288X is not set -# CONFIG_SOC_RT305X is not set -CONFIG_SOC_RT3883=y -CONFIG_SPI=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -# CONFIG_SPI_MT7621 is not set -CONFIG_SPI_RT2880=y -CONFIG_SRCU=y -CONFIG_SWCONFIG=y -CONFIG_SWPHY=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_SYS_HAS_CPU_MIPS32_R2=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_SYS_SUPPORTS_MIPS16=y -CONFIG_SYS_SUPPORTS_ZBOOT=y -CONFIG_TARGET_ISA_REV=2 -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TINY_SRCU=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -CONFIG_WATCHDOG_CORE=y -- 2.30.2