From cbc75a9c701a05686b67a754e83a710bca62c41f Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Thu, 28 Apr 2011 21:27:42 +0000 Subject: [PATCH] ar71xx: use the ar8316 switch driver on the PB92 board and add a matching default network config SVN-Revision: 26779 --- .../base-files/etc/defconfig/pb92/network | 31 +++++++++++++++++++ target/linux/ar71xx/base-files/lib/ar71xx.sh | 3 ++ .../ar71xx/files/arch/mips/ar71xx/mach-pb92.c | 11 ++----- 3 files changed, 37 insertions(+), 8 deletions(-) create mode 100644 target/linux/ar71xx/base-files/etc/defconfig/pb92/network diff --git a/target/linux/ar71xx/base-files/etc/defconfig/pb92/network b/target/linux/ar71xx/base-files/etc/defconfig/pb92/network new file mode 100644 index 0000000000..c2d3e1cb4a --- /dev/null +++ b/target/linux/ar71xx/base-files/etc/defconfig/pb92/network @@ -0,0 +1,31 @@ +config interface loopback + option ifname lo + option proto static + option ipaddr 127.0.0.1 + option netmask 255.0.0.0 + +config interface lan + option ifname eth0.1 + option type bridge + option proto static + option ipaddr 192.168.1.1 + option netmask 255.255.255.0 + +config interface wan + option ifname eth0.2 + option proto dhcp + +config switch + option name eth0 + option reset 1 + option enable_vlan 1 + +config switch_vlan + option device eth0 + option vlan 1 + option ports "0t 1 3 4 5" + +config switch_vlan + option device eth0 + option vlan 2 + option ports "0t 2" diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 25915616fd..bedc3c131a 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -61,6 +61,9 @@ ar71xx_board_name() { *PB44) name="pb44" ;; + *PB92) + name="pb92" + ;; *"RouterBOARD 411/A/AH") name="rb-411" ;; diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-pb92.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-pb92.c index 4a05f5bdca..e598ebc539 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-pb92.c +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-pb92.c @@ -86,19 +86,14 @@ static void __init pb92_init(void) ar71xx_add_device_m25p80(&pb92_flash_data); - ar71xx_add_device_mdio(~0); + ar71xx_add_device_mdio(~BIT(0)); ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0); - ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; ar71xx_eth0_data.speed = SPEED_1000; ar71xx_eth0_data.duplex = DUPLEX_FULL; - - ar71xx_init_mac(ar71xx_eth1_data.mac_addr, mac, 1); - ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII; - ar71xx_eth1_data.speed = SPEED_1000; - ar71xx_eth1_data.duplex = DUPLEX_FULL; + ar71xx_eth0_data.phy_mask = BIT(0); ar71xx_add_device_eth(0); - ar71xx_add_device_eth(1); ar71xx_register_gpio_keys_polled(-1, PB92_KEYS_POLL_INTERVAL, ARRAY_SIZE(pb92_gpio_keys), -- 2.30.2