From cb96a690724e105f149b27a88d66669c53b01625 Mon Sep 17 00:00:00 2001 From: Alan Douglas Date: Mon, 12 Nov 2018 16:42:01 +0000 Subject: [PATCH] dt-bindings: phy: Document cadence Sierra PHY bindings Add DT binding documentation for Sierra PHY. The PHY supports a number of different protocols, including PCIe and USB. The PHY lanes may be configured as single or multi-lane links. Each link is treated as a separate sub-node. For example, if there are 4 lanes in total the first 2 might be configured as a multi-lane PCIe link while the other two are single lane USB links, and in this case there would be 3 sub-nodes. There are two resets for the PHY block (one for APB register access, one for the PHY link) and separate resets for each link. For multi-lane links, the reset corresponds to the reset line on the master lane, the resets on other lanes have no effect. Signed-off-by: Alan Douglas Reviewed-by: Rob Herring Signed-off-by: Kishon Vijay Abraham I --- .../bindings/phy/phy-cadence-sierra.txt | 67 +++++++++++++++++++ 1 file changed, 67 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt diff --git a/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt new file mode 100644 index 000000000000..6e1b47bfce43 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-cadence-sierra.txt @@ -0,0 +1,67 @@ +Cadence Sierra PHY +----------------------- + +Required properties: +- compatible: cdns,sierra-phy-t0 +- clocks: Must contain an entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must be "phy_clk" +- resets: Must contain an entry for each in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include "sierra_reset" and "sierra_apb". + "sierra_reset" must control the reset line to the PHY. + "sierra_apb" must control the reset line to the APB PHY + interface. +- reg: register range for the PHY. +- #address-cells: Must be 1 +- #size-cells: Must be 0 + +Optional properties: +- cdns,autoconf: A boolean property whose presence indicates that the + PHY registers will be configured by hardware. If not + present, all sub-node optional properties must be + provided. + +Sub-nodes: + Each group of PHY lanes with a single master lane should be represented as + a sub-node. Note that the actual configuration of each lane is determined by + hardware strapping, and must match the configuration specified here. + +Sub-node required properties: +- #phy-cells: Generic PHY binding; must be 0. +- reg: The master lane number. This is the lowest numbered lane + in the lane group. +- resets: Must contain one entry which controls the reset line for the + master lane of the sub-node. + See ../reset/reset.txt for details. + +Sub-node optional properties: +- cdns,num-lanes: Number of lanes in this group. From 1 to 4. The + group is made up of consecutive lanes. +- cdns,phy-type: Can be PHY_TYPE_PCIE or PHY_TYPE_USB3, depending on + configuration of lanes. + +Example: + pcie_phy4: pcie-phy@fd240000 { + compatible = "cdns,sierra-phy-t0"; + reg = <0x0 0xfd240000 0x0 0x40000>; + resets = <&phyrst 0>, <&phyrst 1>; + reset-names = "sierra_reset", "sierra_apb"; + clocks = <&phyclock>; + clock-names = "phy_clk"; + #address-cells = <1>; + #size-cells = <0>; + pcie0_phy0: pcie-phy@0 { + reg = <0>; + resets = <&phyrst 2>; + cdns,num-lanes = <2>; + #phy-cells = <0>; + cdns,phy-type = ; + }; + pcie0_phy1: pcie-phy@2 { + reg = <2>; + resets = <&phyrst 4>; + cdns,num-lanes = <1>; + #phy-cells = <0>; + cdns,phy-type = ; + }; -- 2.30.2